Hitachi Maxell DP02 Digital Pen including Bluetooth transmitter User Manual users manual

Hitachi Maxell Ltd Digital Pen including Bluetooth transmitter users manual

UserManual.wiki >

Hitachi Maxell >

DP02 User Manual >

Contents

1. Users manual
2. users manual

users manual

DP-201 (R4.1) Digital Pen Installation Manual Thank you for your interest in the Hitachi Maxell Digital Pen. Thorough reading of and frequent reference to this Instruction Manual will ensure you enjoy optimal performance from this state-of-the-art tool. The serial number and Bluetooth PIN code is written on a label that packed with the digital pen. At first, please paste it on the following ‘Digital Pen Data Record Column’. The information contained in this manual may be necessary when using the digital pen. Please keep this Instruction Manual in an easily accessible place. Important Information : For Your Safety Safety Precautions Do not look inside the pen through the writing point. Directly looking at the infrared light of the pen could damage your eyesight. This product is for domestic use. This digital pen has specifications for use in the EU. The software provided with this digital pen is in English. The provided warranty is valid only in the EU. Hitachi Maxell shall be free from any responsibility for after-sales service in foreign countries when the digital pen malfunctions or is faulty in those countries, or for any compensation of repair fees. Do not resell this product in any foreign country. Do not use this pen for any other purpose than writing. Be careful with oil-based ink. Oil-based ink stains on clothes may not be removable. Do not write with the pen point facing up. Holding the pen with the point up may cause the ink to leak. Use only specified refills. Do not use the pen when there is a malfunction. If the pen generates smoke or an odor, immediately stop using the pen, then remove the power supply, such as the charger. Continuing to use the pen could cause a fire or electric shock. WARNING: Never attempt to repair the pen by yourself. This is always dangerous. Do not disassemble or modify the pen in any way, or remove the cover. Disassembling or modifying the pen or the charger could cause a fire or electric shock. A high voltage device is stored inside the cover. Handle the charger with care. Observe the following when handling the charger. Failure to do so could result in the generation of heat or a fire: - Do not charge the battery near fire or under direct sunlight. - Do not use a charger other than that specified (model PS-DP1 charger). Use the charger near an AC outlet. Do not plug the charger into an AC outlet that is not easily accessible, such as behind a chest or under a desk. Be careful not to damage the charger case. If the case is damaged by dropping the charger, unplug the charger from the AC outlet. Using it as is could cause a fire or electric shock. Use the charger only in a well-ventilated, spacious area. Do not use the charger in a confined, poorly ventilated space , and do not place it too near other objects. Using the charger in a small, cramped area may cause heat to build up inside the charger case, which could damage the case and also cause a fire, burns, electric shock or malfunctions. Do not use a generally available electronic transformer. Do not connect the charger to an electronic transformer that is generally available for overseas trips. Doing so could cause a fire or electric shock. Do not use the charger for appliances other than this digital pen. The charger is for the exclusive use of this digital pen. Do not insert or remove the power plug with wet hands. Handling the plug with wet hands could cause electric shock. Do not damage the power cord. Observe the following when handling the power cord so as not to damage it: - Do not cut it with a knife. - Do not expose it to heat. - Do not twist it. - Do not pull it. - Do not forcibly bend it. - Do not modify it in any way. - Do not bundle it. - Do not cover it, such as with a rug. - Do not place any heavy object or an object with sharp corners on it. If the power cord is damaged, unplug it from the AC outlet. Using a damaged power cord could cause a fire or electric shock. Insert the power plug completely. An improperly inserted power plug might cause a defective contact, which could generate heat and result in a fire. Do not connect multiple devices to one AC outlet. Do not exceed the ratings when using the charger or connection devices. Exceeding ratings due to the connection of multiple devices could generate heat and cause a fire. Do not pull the power cord when unplugging it. Be sure to hold the plug when unplugging the power cord. Pulling the cord may damage the cord, which could cause a fire or electric shock. Do not bring the digital pen or the power cord near a heater. If used near a heater, the surface of the device or components inside will deteriorate, and could cause a fire or electric shock. Always unplug the power cord from the AC outlet when not using the digital pen for a long period. Leaving the power plug connected to the AC outlet for a long time could cause a fire. Be careful not to trip on the power cord or USB cable. If your leg is caught on the power cord or USB cable, you may fall down and injure yourself. Do not use the digital pen in an airplane. Never use the pen in an airplane because it could interfere with in-flight safety (be sure to cap the pen and turn it off before boarding a plane). Do not use the digital pen near a high-precision electronic device. Turn the digital pen off near any high-precision electronic device so as not to interfere with it. Examples of devices the pen could affect include. Pacemakers, hearing aids or other electronic medical devices, fire alarms, and automatic doors. If you are using an electronic medical device, consult the manufacturer or dealer for information on the effects of radio waves on such a device. Be careful of itching, rash and eczema. This pen might cause itching, rash or eczema. If this happens, stop using the pen immediately and consult a physician. Note on handling refills. Do not reuse damaged refills as this could cause ink leakage. When replacing refills, take special care not to damage the tip of the pen. Do not subject the digital pen to impact. The digital pen is a precision device. Take great care not to hit it against a hard objects or drop it. No sand or dust! If sand or dust enter the pen or the charger, it will cause a malfunction. No water or oil! If water or oil enter the pen or the charger, it will cause an electric shock or a malfunction. Take care with ambient temperature. In extremely hot or cold temperatures, the digital pen may not operate normally. Do not leave the pen in a closed vehicle for a long period of time as this may cause the pen to malfunction. Do not point the digital pen at the sun. Direct sunlight entering the lens could cause the pen to malfunction. Do not use the digital pen near a TV or radio. The digital pen may interfere with TV and radio broadcasts. Do not use the digital pen near strong radio waves or magnetic fields. If the digital pen is used near strong radio waves or magnetic fields, such as near a radio tower or electric appliances incorporating a motor, the pen may not operate normally. Do not use the digital pen where there is thick soot or steam. Thick soot or steam could damage the pen case or cause malfunctions. Do not use the digital pen near corrosive gas. The parts inside the pen could corrode when used in a place where there is dense exhaust gas generated by gasoline or diesel engines, or corrosive gas such as hydrogen sulfide, which could cause the pen to malfunction. Do not use the digital pen near an ultrasonic humidifier. Calcium and other chemicals dissolved in water and dispersed through the air via a humidifier could adhere to the lens of the pen and cause a malfunction. If moisture enters the pen, condensation could cause the pen to operate abnormally. Do not wipe the digital pen case with benzene or thinner. The coating of case could peel off or be damaged if it comes in contact with benzene or thinner. Storage Precautions Do not expose the digital pen to a very high temperature for a long period of time. The temperature inside a closed vehicle or trunk can rise as high as 164 ºF (73 ºC) on a hot day. If exposed to such conditions, the digital pen could malfunction or the pen body could be deformed. Also, do not expose the pen to direct sunlight or place it near a heater. Do not store the digital pen in humid or dusty places. Dust entering the pen could cause a malfunction. Humidity could cause the lens to become moldy, making the pen unusable. Do not store the digital pen in a place subject to strong magnetic fields or intense vibrations. Strong magnetic fields or vibrations could cause malfunctions. The digital pen has a sharp point, which could be a dangerous weapon. Never point it at a person, and keep the pen out of the reach of children. Incorrect use of the pen could cause an injury. Take great care that young children do not swallow the cap, refill or refill replacement adapter by mistake. If the cap, refill or refill replacement is swallowed, consult a physician immediately. Put the cap on the digital pen. Be sure to put the cap on the digital pen to protect the pen-point lens when carrying it around or when it is not in use. Take Note Of The Following Repair & Disposal. Please consult Hitachi Maxell, our sales partner or reseller if you want to repair or dispose of your digital pen. No recorded contents shall be subject for compensation. Hitachi Maxell shall be free from any responsibilities for any improper recording, and any damages from abnormal recording shall not be subject for compensation if the digital pen is faulty, or if it is mistakenly used by you. Product liability: The digital pen is designed and manufactured for home and general business use only. Hitachi Maxell cannot accept any responsibility for any accident that might cause damage to human life or loss to property due to use of the product in such applications as chemical plant controls, life-support, and air traffic control systems, where a very high-level of responsibility is required. Using Pen Cradle: For USB connection and battery charging, the pen cradle PC-201 must be used. PC-201 is designed for digital pen DP-201. Charging Battery The battery is uncharged at the time of purchase. Charge it before using the digital pen. Because uncapping the digital pen turns the pen on, be sure to cap it when charging. Charging will start, and the battery indicator in the pen operation display will blink green to show that the battery is being charged. If the battery is completely discharged, it will take approx. 10 minutes for the battery indicator to blink green after charging has started. It will take approx. 2.5 hours to completely charge the battery. The charge time will vary depending on the battery's remaining-charge level. Interpreting Operation Display Block The indicators in the operation display will inform you of the status of the digital pen. (1) Indicator Status of digital pen Off - The pen is turned off. - The battery is dead. Green - The digital pen is ready to use. - All written data will be stored in the pen's memory. Blinks green The digital pen is in standby mode after a break in activity. (2) Indicator Status of digital pen Blinks green The digital pen is communicating with an external device. Red An error occurred during communications (for example, the digital pen and external device cannot communicate with each other or use services). (3) Indicator Status of digital pen Blinks green The charger is connected and the battery is being charged. (If the battery has no remaining charge, it will take approx. 10 minutes for the battery indicator to blink green after charging has started.) Green Charging is complete, and the charger is still connected. Off Charging is complete, and the charger has been disconnected. Blinks green slowly The battery has about 20 minutes of power remaining. Charge the battery as soon as possible. Blinks red slowly The battery is almost dead. Recharge immediately. Digital Pen Data Record Column WARNING :TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. WARNING :TO PREVENT FIRE OR SHOCK HAZARD, USE THE RECOMMENDED ACCESSORIES ONLY. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, BE SURE TO USE THE SPECIFIED CHARGER (PS-DP1).