Hitachi Maxell M03 Smart Card Reader/Writer User Manual

Hitachi Maxell Ltd Smart Card Reader/Writer Users Manual

Exhibit B Users Manual

Download: Hitachi Maxell M03 Smart Card Reader/Writer User Manual
Mirror Download [FCC.gov]Hitachi Maxell M03 Smart Card Reader/Writer User Manual
Document ID103094
Application ID84Kr1gVv4WV8l5PbBahdBg==
Document DescriptionExhibit B Users Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize6.77kB (84576 bits)
Date Submitted2000-06-05 00:00:00
Date Available2000-06-21 00:00:00
Creation Date2000-06-02 16:00:00
Producing SoftwareAcrobat PDFWriter 4.0 Windows
Document Lastmod2000-06-02 16:01:57
Document TitleUsers Manual
Document Creatoræ©¡Microsoft Word
Document Author: æ©¡masahiro oohashi

EXHIBIT B
NEEM03
USER MANUAL
Contents & Connection to the PC
R/W (M-360M, Cable is attached)
Number
DRAFT
To PC PS/2 port
(mouse port or
keyboard port)
To mouse or
Keyboard
Power & RS-232C cable
To PC serial port
R/W
LED
IC card insertion slot
NEEM03
How to use
Completely insert the IC card with contact on the upper surface,
DRAFT
contact side first, until it reaches the end of the IC card slot. The
LED will blink green.
LED
Green light on: R/W power on
Green light blinks: IC card is inserted
Red light on: IC cart power on, active
NEEM03
Caution
Failure to do the following may result in a decrease in
performance of the apparatus, trouble, breakage, deformation,
DRAFT
discoloring, electric shock, smoke, burning, or other dangers
○Do not disassemble or modify the product.
○Do not use this apparatus in moist or dusty environments.
○Do not leave this apparatus in high temperature or high
humidity environments and do not exposed to direct
sunlight.
○Do not subject the apparatus to severe mechanical shocks.
○Do not insert metallic plates, plastics and papers into card
slot. Do not insert cards that are out of specifications.
○When the Red light is on, do not remove the IC card from
the product, do not remove the power cable from the PC,
or do not shut down the PC.
○Do not insert IC card upside down, do not insert IC card
revers direction, especially embossed card.
NEEM03
General specifications
Model
M-360M
Card insertion/ejection Manual/manual(durability: 100K passes)
DRAFT
Acceptable IC card
IC card conforming to ISO7816 with
“T=0”, “T=1”.
Note : No Vpp control. The IC card
must be warped or bent under 2mm.
Host interface
Based on RS-232C interface,
Asynchronous
Power supply
DC5V±5%, 110mA Max.
(Supplied from PC PS/2 port)
Outer dimensions
76mm×105mm×23mm
(Cable is not included)
Weight
About 160g (Cable is not included)
Operating conditions
0∼50℃ 10∼85%RH (No condensation)
Indoor use only
Storage conditions
-10∼60℃ 10∼90%RH (No condensation)
NEEM03
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
DRAFT
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment interferes with radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to eliminate the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NEEM03
This device complies with Part 15 of the FCC Rules/ Operation is subject
to the following two conditions:
DRAFT
(1) this device may not cause harmful interference, and
(2) this device must accept any interference receive including interference
that may cause undesired operation.
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPLOVED BY
THE MANUFACTURER FOR COMPLIANCE COULD VOID THE
USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : .橡.Microsoft Word
Create Date                     : 2000:06:02 16:00:00
Title                           : .橡.取説FCC申請版000522.PDF
Author                          : .橡.masahiro oohashi
Producer                        : Acrobat PDFWriter 4.0 Windows
Modify Date                     : 2000:06:02 16:01:57+09:00
Page Count                      : 7
EXIF Metadata provided by EXIF.tools
FCC ID Filing: NEEM03

Navigation menu