Hitachi 43F300 User Manual PROJECTION TV Manuals And Guides L0305435

HITACHI Projection/Digital 42 and above TV Manual L0305435 HITACHI Projection/Digital 42 and above TV Owner's Manual, HITACHI Projection/Digital 42 and above TV installation guides

User Manual: Hitachi 43F300 43F300 HITACHI PROJECTION TV - Manuals and Guides View the owners manual for your HITACHI PROJECTION TV #43F300. Home:Electronics Parts:Hitachi Parts:Hitachi PROJECTION TV Manual

Open the PDF directly: View PDF .
Page Count: 64

Download
Open PDF In Browser	View PDF

PROJECTION

COLOR TV

OPERATING GUIDE
IMPORTANT

SAFETY INSTRUCTIONS

FIRST TIME USE

V_d_o

2-3

4-18

THE REMOTE CONTROL

19-29

ON-SCREEN

30-56

jbJ

I[A"'_¸_o

DISPLAY

USEFUL INFORMATION

As an ENERGYSTAR® Partner, Hitachi,
product

Ltd. has determined

meets the ENERGY STAR ® guidelines

that this

for energy efficiency.

INDEX

57-63

IMPORTANT
SAFETY POINTSYOU SHOULD KNOW ABOUT
YOUR HITACHI TELEVISION
Our reputation has been built on the quality, performance, and ease of service of HITACHI televisions.
Safety is also foremost in our minds in the design of these units. To help you operate these products properly, this section illustrates safety tips which will be of benefit to you. Please read it carefully and apply the knowledge you obtain
from it to the proper operation of your HITACHI television.
Please fill out your warranty card and mail it to HITACHI. This will enable HITACHI to notify you promptly in the improbable event that a safety problem should be discovered in your product model.
Follow all warnings and instructions marked on this television.

CAUTION

The lightning flash with arrowhead symbol, within an equilateral tri*
angle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the producrs enclosure that may be of a
sufficient magnitude to constitute a risk of electric shock to persons.

RISK OF ELECTRIC SHOCK
DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).

The exclamation point within an equilateral triangle, is intended to
alert the user to the presence of important operating and mainte*
nance (servicing) instructions
in the literature accompanying
the
appliance.

NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING:
TO PREVENT FIRE OR SHOCK
OR MOISTURE.

HAZARD,

DO NOT EXPOSE

THIS TELEVISION

TO RAIN

NOTE:

• There are no user serviceable parts inside the television.
• Model and serial numbers are indicated on back side of the television.

CAUTION:

Adjust only those controls that are covered in the instructions, as improper changes or modifications not expressly approved by HITACHI could void the user's authority to operate the television.

MODIFICATIONS:

The FCC requires the user to be notified that any changes or modifications made to this device that
are not expressly approved by Hitachi America, Ltd. Home Electronics Division may void the user's
authority to operate the equipment.

POWER SOURCE
THIS TELEVISION IS DESIGNED TO OPERATE ON 120 VOLTS 60Hz, AC CURRENT.
POWER CORD INTO A 120 VOLT 60Hz OUTLET.

INSERT THE

TO PREVENT ELECTRIC SHOCK, DO NOT USE THE TELEVISION'S
(POLARIZED)
PLUG WITH AN
EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES AND GROUND TERMINAL
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
NEVER CONNECT THE TELEVISION
SPECIFIED VOLTAGE.
NOTE:

TO 50Hz, DIRECT

CURRENT,

OR ANYTHING

This television receiver will display television closed captioning, (_"_
paragraph 15.119 of the FCC rules.

OTHER THAN THE

or _L.J), in accordance with

the television
does
not
properly,
unplug
television
your
authorized
dealer
or
CAUTION: ards.
NeverIfremove
the back
cover
ofoperate
the television
as this
canthe
expose
you toand
verycall
high
voltages
and other
hazservice center.

IMPORTANT
Read before operating equipment
Follow all warnings and instructions marked on this television.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use the attachments/accessories
specified by the
manufacturer.
12. _
Use only with the cart, stand, tripod,
bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have
fallen into apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has
been dropped.
Do not place any objects on the top of the television
which may fall or cause a child to climb to retrieve
the objects.

15.Televisions are designed to comply with the recommended safety standards for tilt and stability.
Do not apply excessive pulling force to the front, or top,
of the cabinet which could cause the product to overturn resulting in product damage and/or personal injury.
16. Follow instructions for wall, shelf or ceiling mounting as
recommended by the manufacturer.
17. An outdoor antenna should not be located in the vicinity of overhead power lines or other electrical circuits.
18. If an outside antenna is connected to the receiver be
sure the antenna system is grounded so as to provide
some protection against voltage surges and built up
static charges. Section 810 of the National Electric
Code, ANSI/NFPA No. 70-1984, provides information
with respect to proper grounding for the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding connectors,
location of antenna-discharge
unit, connection to
grounding electrodes and requirements for the grounding electrode.

Note to the CATV system installer: This reminder is
provided to call the CATV system installer's attention to
Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the point of cable entry
as practical.

Disposal of this product may require specific
instructions pertaining to your resident state. For
disposal or recycling information, please contact
your local authorities or the Electronic Industries
Alliance: www.eiae.org.

Projection TV's are heavy and can mark or damage floor surfaces (especially wood flooring) if moved improperly. Do not
slide or force TV into position. Always roll TV allowing casters at bottom of unit to help steer and 3osition the TV.
PREVENTION OF SCREEN BURN
Images should be viewed mostly in 4:3 Standard picture format or zoomed to fill the screen with moving pictures. Use of top
and bottom panels during 16:9 Standard picture formats should only be 15% of your total viewing time to prevent uneven aging
of the phosphors. Phosphors in the lighted area of the picture will age more rapidly than the gray areas.
The use of panels and other continuous on-screen displays such as video games, stock market quotations, computer generated
graphics, and other fixed (non-moving) patterns can cause permanent damage to television receivers. Such "SCREEN BURNS"
constitute misuse and are NOT COVERED by your HITACHI Factory Warranty.
When using the Picture-in-Picture function, the sub-picture should not be left permanently in one corner of the screen or a
"SCREEN BURN" may develop over a long period of time.
PUBLIC VIEWING OF COPYRIGHTED MATERIAL
Public viewing of programs broadcast by TV stations and cable companies, as well as programs from other sources, may require
prior authorization from the broadcaster or owner of the video program material.
3

ACCESSORIES
Check to make sure you have the following accessories before disposing of the packing material.
PART NAME

PART NO.

ILLUSTRATION

REMOTECONTROL
CLU-4321UG
OR

HL01831

swap _r__D_

REMOTECONTROL
CLU-43_UG

HL01834

43" TELEVISION
STAND
SP-43T
(Not included,
order separately)
OPTIONAL

CAUTION:

H530047

is capable model
of resulting
in instability
causing
possible 43"
injury.
Television
43F300
for use only
with Hitachi's
Television Stand model SP-43T. Use with other stands

1. Remote Control Unit is either CLU-4321UG (Part No. HL01831) or CLU-4324UG
2. Two "AA" size, 1.5V batteries (For Remote Control Unit).

REMOTE

CONTROL

BATTERY

INSTALLATION

(Part No. HL01834).

AND REPLACEMENT

1. Open the battery cover of the remote control by pushing the notched part of the cover with your fingers and pulling the
cover off.
2. Insert two new "AA" size batteries for the remote control. When replacing old batteries, push them towards the springs
and lift them out.
3. Match the batteries to the (+) and (-) marks in the battery compartment.
BOTTOM

VIEW

4. Replace the cover.

Lift up on tabt_
_e_ove b_ck ¢ovet_

Danger of explosion if battery is incorrectly replaced.
CAUTION:

Replace with the same or equivalent type.

HOW TO SET UP YOUR NEW HITACHI PROJECTION

ANTENNA
Unless your TV is connected to a cable TV system or to a centralized antenna system, a good outdoor TV antenna is recommended for
best performance. However, if you are located in an exceptionally good signal area that is free from interference and multiple image
ghosts, an indoor antenna may be sufficient.
LOCATION
Select an area where sunlight or bright indoor illumination will not fall directly on the picture screen. Also, be sure that the location
selected allows a free flow of air to and from the perforated back cover of the set.
To avoid cabinet warping, cabinet color changes, and increased chance of set failure, do not place the TV where temperatures can
become excessively hot, for example, in direct sunlight or near a heating appliance, etc.
VIEWING
The major benefit of the HITACHI Projection Television is its large viewing screen.
locations in the room to find the optimum spot for viewing.

To see this large screen at its best, test various

The best picture is seen by sitting directly in front of the TV and about 10 to 18 feet from the screen.
the viewer moves to the left and right of the receiver.
During daylight hours, reflections from outside light may appear on the screen.
reflection or the TV can be located in a different section of the room.

Picture brightness decreases as

If so, drapes or screens can be used to reduce the

If the TV's audio output will be connected to a Hi-Fi system's external speakers, the best audio performance will be obtained by placing
the speakers equidistant from each side of the receiver cabinet and as close as possible to the height of the picture screen center. For
best stereo separation, place the external speakers at least four feet from the side of the TV, place the surround speakers to the side or
behind the viewing area. Differences in room sizes and acoustical environments will require some experimentation with speaker
placement for best performance.

1
4' MINIMUM

4' MINIMUM
0'

,l_

CAUTION:

to
the television.
Moveasthe
magnetic
field source
thethe
television
until
thereif is
no are
picture
distortion.
Magnetic
fields, such
those
of external
speakers,away
mayfrom
cause
picture to
distort
they
placed
too close

HOOK-UP CABLES AND CONNECTORS
Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For
best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell
audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output
and input connector types required by the various components and the length of each cable.

300-Ohm Twin Lead Connector
This outdoor antenna cable must be connected
antenna adapter (300-Ohm to 75-Ohm).

"F"Type 75-Ohm Coaxial Antenna Connector
For connecting RF signals (antenna or cable TV) to the
antenna jack on the television.

to an

S-Video (Super Video) Connector
This connector is used on camcorders, VCRs and laserdisc players with an S-Video feature in place of the
standard video cable to produce a high quality picture.

Phono Connector
Used on all standard video and audio cables which
connect to inputs and outputs located on the television's
rear jack panel and front control panel.

ANTENNA CONNECTIONS

TO REAR JACK PANEL

VHF (75-Ohm) antenna/CAW (Cable TV)
When using a 75-Ohm coaxial cable system, connect the outdoor antenna or CATV
coaxial cable to the ANT A (75-Ohm) terminal, if you have a second antenna or
cable TV system, connect the coaxial cable to the ANT B terminal.

TO outdoor antenna

or
TO outdoor VH F
or UHF antenna

VHF (300-Ohm) antennaiUHF antenna
When using a 300-Ohm twin lead from an outdoor antenna, connect the VHF or
UHF antenna leads to screws of the VHF or UHF adapter. Plug the adapter into
the antenna terminal on the TV.

When both VHF and UHF antennas are connected
Attach an optional antenna cable mixer to the TV antenna terminal, and connect
the cables to the antenna mixer. Consult your dealer or service store for the
antenna mixer.

TO UHF

ANT A/ANT

Antenna

TO outdoor
antenna or
CATV system

%J
Antenna

mixer

FRONT PANEL CONTROLS

• 43F300==
@"
SVl_O

WDEOt:M AU_ _

®@

MAGIC_OCU8
•

•

E×I

SEtEC

i _._W. ---J i

• 53F300m
r

Push open door and

MENU/SELECT button
This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. This
button also serves as the SELECT button when in MENU mode.
INPUT/EXIT button
Press this button to select the current antenna source, VIDEO: 1,2, 3, 4, 5 or alternate antenna source. Your selection is shown in
the top right corner of the screen. This button also serves as the EXIT button when in MENU mode.

I NOTES:

Your
on
your
remote
choice
control
(see does
page not
21).have an INPUT button. To change to video inputs, press VIDI~VID5

CHANNEL selector
Press these buttons until the desired channel appears in the top right corner of the TV screen.
the cursor down (V) and up (A) buttons when in MENU mode.

buttons depending

I
I

These buttons also serve as

VOLUME level
Press these buttons for your desired sound level. The volume level will be displayed on the TV screen. These buttons also serve
as the cursor left (<) and right (1_) buttons when in MENU mode.
POWER button
Press this button to turn the TV on or off.
I NOTE:
(_)

For the 43F300 model, the power light is located in the POWER button.

MAGIC FOCUS
Use this button to automatically adjust your picture quality to optimum performance
work when adjustment mode is set to manual (see page 48).

(see page 47). The Magic Focus button will not

FRONT INPUT JACKS (INPUT 5)
Use these audio/video jacks for a quick hook-up from a camcorder or VCR to instantly view your favorite show or new recording.
Press the INPUT button until VIDEO: 5 appears in the top right corner of the TV screen. If you have mono sound, insert the audio
cable into the left audio jack.
IR RECEIVER
The IR receiver (remote sensor) of the TV is in the control panel. When using the remote control, point it towards the control panel
for best response.
DIMMER SENSOR
The Dimmer Sensor will automatically
(_)

reduce picture contrast and brightness when viewing in a dark room (see page 35).

POWER LIGHT (53F300 only)
You will see a red light when the TV is turned on.

FRONT PANEL JACKS AND CONNECTORS
The front panel jacks are provided as a convenience
examples:

S.VIDEO

to allow you to easily connect a camcorder

-AUDIO-

S.VIDEO

ooo

VtD£O UMONO

MAGIC FOCUS

or VCR as shown in the following

-AUDIO

'"_o-" 000

[]

VtDEO khMONO

R
MAGIC[]FOCUS

INPUT

43F300
S-iNPUT

OUTPUT
S-VHS

S-VHS
Video
Camera

VCR

Back of VCR
S-VHS

OUTPUT

S,NPUT
llll

(Optional, see note)

53F300

NOTE:

INPUT

1. Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture
may be abnormal.
2. If you have a S-VHS VCR, use the S-INPUT cable in place of the standard video cable.
3. If you have a mono VCR, insert the audio cable into the left audio jack of your TV.
8

REAR PANEL JACKS

A_TA

40
TO
_HVE_TE_

A_T

®
(_)

Antenna Input/Output
The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B. ANT A input can
be displayed as a main picture or sub-picture. ANT B can only be displayed as a main picture. (ANT B cannot be displayed as a
sub-picture.) The antenna output labeled "TO CONVERTER" allows the ANT A connection to pass directly to a different source
such as a cable box, only when ANT B is displayed as a main picture.

Audio/Video Inputs 1, 2, 3 and 4
The VIDI~VtD4 buttons will select each video source each time they are pressed. Use the audio and video inputs to connect
external devices, such as VCRs, camcorders, laserdisc players, DVD players etc. (If you have mono sound, insert the audio cable
into the left audio jack.)

NOTE:

You may use VIDEO or S-VIDEO inputs to connect to INPUT 3 and 4, but only one of these inputs may be used at a
time.

MONITOR OUT
These jacks provide fixed audio and video signals which are used for recording.
output.
NOTE:
(_

Use the S-VIDEO Output for high quality video

S-VIDEO Output may be used for recording, only when the input is of S-VIDEO type.

AUDIO TO HI-FI Output
These jacks provide variable audio output to a separate stereo amplifier.
controlled by the television's main volume.

With this connection,

the audio to the stereo can be

S-VIDEO Inputs 3 and 4
Inputs 3 and 4 provide S-VIDEO (Super Video) jacks for connecting

equipment with S-VIDEO output capability.

REAR PANEL JACKS
(_

Component:
Inputs

use composite
NOTES:

Y-PBPR

1 and 2 provide
video

Inputs
Y-PBPR jacks for connecting
signal

1. Do not connect composite
over VIDEO input.
2. Your component
the components

equipment

with this capability,

such

as a DVD player

or Set Top Box.

You may

for INPUT:2.
VIDEO

and S-VIDEO

to Input

3, 4 or 5 at the same time.

outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components
R-Y output to the TV's PR input.

3. Your component outputs may be labeled Y-CBC R. In this case, connect the component
component C R output to the TV's PR input.
4. It may be necessary

has priority

B-Y output to the TV's PB input and

C B output to the TV's PB input and the

to adjust TINT to obtain optimum picture quality when using the Y-PBPR inputs (see page 33).

5. To ensure no copyright
6. Input 2 (YNIDEO)

S-VIDEO

infringement,

the MONITOR OUT output will be abnormal, when using the Y-PBPR jacks.

can be used for composite

video and component video input.

REAR PANEL CONNECTIONS
TYPICAL

FULL-FEATURE

SETUP

DVDPlayer
2+Way signal spiitter

OUTPUT _

HDTVSet+Top
Box?
OUTPUT

@977
SV D 0

II_PUT

VCR#2

Laserdiscplayer,VCR,
camcorder+
etc.

StereoSystemAmplifier

NOTE:

1.
2,
3,
4.

Connect only 1 component to each input jack.
Follow connections that pertain to your personal entertainment
Composite video signal can be input to Input2-1nput5.
Cables are not included with the purchase of this television.

system.

TIPS ON REAR PANEL CONNECTIONS
S-VIDEO connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these connections
in place of the standard video connection if your device has this feature.
If your device has only one audio output (mono sound), connect it to the left audio jack on the television.
Refer to the operating

guide of your other electronic

equipment

for additional

information

on connecting

your hook-up cables.

A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output (INPUT:
example on page 11). Refer to your VCR operating guide for more information on line input-output connections.
You may use VIDEO or S-VIDEO
Connect

only 1 component

3 in the

inputs to connect to Input 3, Input 4 or Input 5, but only one of these may be used at a time.

(VCR, DVD player, camcorder,

etc.) to each input jack.

COMPONENT:Y-PBP
R (Input 1 &2) connections are provided for high performance components, such as DVD players and set-topboxes. Use these connections in place of the standard video connection if your device has this feature. Input 2 accepts both composite and component video signals.
Your component outputs may be labeled Y, B-Y, and R-Y. In this case,
and the components R-Y output to the TV's PR input.

connect

the components

Your component outputs may be labeled Y-CBC R. In this case, connect the components
components C R output to the TV's PR input.
You may use composite
It may be necessary

B-Y output to the TV's PB input

C B output to the TV's PB input and the

video signal for Input 2~tnput 5.

to adjust TINT to obtain optimum

picture quality when using the Y-PBPR inputs (see page 33).

To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-PBPR jacks.

CONNECTING

EXTERNAL

AUDIO DEVICES

To control the audio level of an external audio amplifier with the remote control, connect the system as shown below.
REAR PANEL OF TELEVISION
AN! A

''r' i@ @ @
0
60 N_R El

AUDO

ANT Fg

{

VI{)I O

7 _IDTO

AUDO

INPUT

00_oo00

StereoSystemAmplifier

the sound using the remote control of the TV set.
I NOTE: 2.
1. To
damage
to the
speaker Settings.
and distorted sound, set the volume control of the audio amplifier lower and adjust
Seeprevent
page 38
for AUDIO
Advanced

CONNECTING

EXTERNAL

VIDEO SOURCES

The exact arrangement you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set Top Box to your TV set is
dependent on the model and features of each component. Check the owner's manual of each component for the location of video and
audio inputs and outputs.
The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your
particular assortment of components and features. For best performance, video and audio cables should be made from coaxial
shielded wire.
Before Operating External Video Source
The input mode is changed every time the VID1 ~VID5 button is pressed as shown below. Connect an external source to the INPUT
terminal, then press the VIDI~VID5 button as necessary to view the input source (see page 21).

INPUT

MODE SELECTION

(ANTENNA)

ORDER
(INPUT)

Ant A

YPBPR:t
VID1

NOTE:

When the TV is set to VIDEO and a video signal is not received from the VIDEO INPUT JACK on the back panel of the
TV (i.e., VCR/laserdisc player, etc. is not connected or the video device is OFF), the set will appear to be OFE

CONNECTING
CONNECTING

EXTERNAL VIDEO SOURCES

A MONAURAL

AUDIO SOURCE TO INPUTI~INPUT5

Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV
set below.

Connect the cable from the AUDIO OUT of the VCR or the laserdisc player to the INPUT (MONO)/L(AUDIO)

Press the VIDI~VID5 button to view the program from the VCR or the laserdisc player. The VIDEO label disappears
automatically after approximately four seconds.

Press the ANT button to return to the previous channel.

ANTA

TO
OObVER/EFI

AW B

4UDO
0 IlY

S VII}EO

@@
Audio

Video

OUTPUT

jack.

CONNECTING

EXTERNAL

VIDEO SOURCES

CONNECTING A STEREO SOURCE TO INPUTI~INPUT5
1.
Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV
set below.
2.

Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.

Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.

Press the VID1 -VID5 button to view the program from the VCR or laserdisc player. The VIDEO label disappears automatically
after approximately four seconds.

Press the ANT button to return to the previous channel.

@@@
0
GO IV fl7_P

_tUDO

AUIIO
fo I I

OUf

OUTPUT
L
V

@@@

NOTES:

Completely insert the connection cord plugs when connecting
played back will be abnormal if the connection is loose.

A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line
output. (INPUT: 3 in example on page 11) Refer to your VCR operating guide for more information on line
input-output connections.

to rear panel jacks. The picture and sound that is

CONNECTING

EXTERNAL VIDEO SOURCES

CONNECTING AN S-VIDEO SOURCE TO INPUT 3, 4 AND 5
1.
Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV
set below.
2.

Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.

Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.

Press the VtD3~VtD5 button to view the program from the VCR or laserdisc player. The VIDEO label disappears automatically
after approximately four seconds.

Press the ANT button to return to the previous channel.

AN A
/

FO
CONVI IIE¢_

//NIB

AO[JI8
0 bl !;I

L
V
OUTPUT

@@@

S@0_

VCR

NOTES:

Completely insert the connection cord plugs when connecting
played back wil be abnormal if the connection is loose.

to rear panel jacks. The picture and sound that is

CONNECTING
CONNECTING

A COMPONENT

EXTERNAL

VIDEO SOURCES

SOURCE TO INPUT 1 OR 2: Y-PBPR .

Connect the cable from the Y OUT of the Laserdisc/DVD player or RDTV set top box to the INPUT (Y) jack, as shown on the TV
set below.

Connect the cable from the CB/P B OUT or B-Y OUT of the Laserdisc/DVD

player or HDTV set top box to the INPUT (PB) jack.

Connect the cable from the CR/P R OUT or R-Y OUT of the Laserdisc/DVD

player or HDTV set top box to the INPUT (PR) jack.

Connect the cable from the AUDIO OUT R of the Laserdisc/DVD

player or HDTV set top box to the INPUT (AUDIO/R) jack.

Connect the cable from the AUDIO OUT L of the Laserdisc/DVD

player or HDTV set top box to the INPUT (AUDIO/L) jack.

Press the VtDI~VtD2 button, to view the program from the Laserdisc/DVD
disappears automatically after approximately four seconds.

Press the ANT button to return to the previous channel.

player or HDTV set top box. The VIDEO label

'
DVDPlayer
OUTPUT
PR PB
Y L

@ @ @@@

_,lrA

]0
8@IVE_iiE_i

A[,JT E_

/_UD}O
]0 HIF

A(IDO

NOTE:

1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
2. See page 12 for tips on REAR PANEL CONNECTIONS.

THE REMOTE CONTROL
In addition to controlling all the functions on your HITACHI Projection TV, the new remote control is designed to operate different
types of VCRs, CBL (Cable TV) converters, satellite receiver, DVD players, and other audio/video equipment with one touch. Basic
operation keys are grouped together in one area.
To operate your TV, point the remote control at the screen of the TV and press the TV button. The remote will now control your
television.
To operate your cable/satellite box, point the remote at the remote sensor of the cable/satellite box and press the CABLE/
SATELLITE (CBUSAT) button. The remote will now control your cable/satellite box (see page 28 for instructionson how to
program the remote to control your cable box).
To operate your DVD/VCR player, point the remote at the remote sensor of the DVD/VCR player and press the DVD/VCR button.
The remote will now control your DVD/VCR player (see pages 27 and 29 for instruction on how to program the remote to control
your DVD/VCR player).

POWER

SWAP

VIDEO

PIP MODE

PIP CH

MUTE

--These
buttons allow the remote to control your
TV, VCR, DVD or cable/satellite box depending on
which mode is chosen, as explained above.

LAST OH

EXIT

--TV OR VCR/DVD BUTTONS
When in TV mode, these buttons, except the REC button,
will select from five video input sources. When in
VCR/DVD mode, these buttons transmit the chosen
precoded VCR/DVD codes.

HOW TO USE THE REMOTE TO CONTROL YOUR TV

"IV POWER

POWER

button -7!/

(_) PICTURE-IN*PICTURE

CBUSAT

DVDNCR

-VIDEO

VIDEO

button /

(_) SELECT,
CURSOR

MENU,
buttons

"-_

/
/

- _

button

"(_)

PiP CH button

(_) LAST CHANNEL
(LAST CH) button
EXIT button

VOLUME,
MUTE buttons

(_)CHANNEL
SELECTORbuttons/
(_

(_)

POWER button
Press this button to turn the TV set on or off
when the remote is in TV mode.

(_) ANTbutton

INFO button

PICTURE-IN-PICTURE
buttons
See separate section on pages 24, 25 and 26
for description.
VIDEO button
Press this button to directly access
the VIDEO adjustment menu.

_VIRTUAL
button
_)VIDI~VID5

buttons

'ASPECT
button

,_,,

(_)

.......
i,iiii!
.....

SELECT, MENU, CURSOR buttons
All the On-Screen Display features can be set or adjusted by using the CURSOR buttons, except for numeric entries.
The CURSOR will highlight functions or adjust and set different features. Press the CURSOR toward desired direction then press
the SELECT button to select.
Favor_

Ant
A_
CURSOR

Channel

A 8

CURSOR

.............
_i_iii!i_:,i_,_,
_,_,,_;i_ii,i!!,_,
_, _

Favorite

Channel

Ant

A 8

A8
A6
A3

_'_'_'iliiii_i'i_'_

When no on-screen displays are on the TV screen, use CURSOR <1 or It" to access the Favorite Channels feature.
To add channels to Favorite Channels, use the number keys to enter the channel number. Use CURSOR It" to highlight "Add", then
press SELECT to store the channel to the Favorite Channel feature.
To delete (Del) the channel from the Favorite Channel, use CURSOR •,
Delete (Del) and press SELECT to delete.
To view a Favorite Channel use CURSOR •,

• to highlight the channel, then CURSOR It" to highlight

• to highlight the channel and press SELECT to view.
2O

HOW TO USE THE REMOTE TO CONTROL YOUR TV
(_

VOLUME, MUTE button
Press the VOLUME up (A) or down (_') button until you obtain the desired sound level.
To reduce the sound to one half of normal volume (SOFT MUTE) to answer the telephone, etc., press the MUTE button. Press the
MUTE button again to turn the sound off completely (MUTE). To restore the sound, press the MUTE button one more time, or press
the VOLUME Up (A) button.

..............
ii;iii_,_

..............

Closed Captioning will display when MUTE/SOFT MUTE is on and Closed Caption is set to AUTO (see page 56).
(_)

CHANNEL selector buttons
CHANNEL selector buttons are used to select channels, lock access code, etc.
Enter one, two, or three numbers to select channels. Enter "0" first for channels 1 to 9, or simply press the single digit channel you
wish to tune then wait a few seconds for the TV to tune. For channels 100 and above, press the "1" button, wait until two dashes
appear next to the channel display on your TV, then enter the remaining two numbers using the number buttons.
Channel selection may also be performed by pressing CH up (A) or down (T).

NOTE:
(_

The TV may not receive some channels if you are not in the correct ANTENNA/CABLE

ANTENNA button
The ANT button will select between Antenna A and Antenna B each time the button is pressed.

;;_ii!;i!i
.............
_

(_)

mode (see page 51).

.................
ii!i:_i:
....

VID1 ~ VID5
When the remote control is in TV mode, press these buttons to directly select the video input sources between the five video inputs.
When the remote control is in Set-Top-Box mode (STB) these buttons will control the Set-Top-Box or satellite receiver, and execute
the secondary function labeled.

HOW TO USE THE REMOTE TO CONTROL YOUR TV
(_

ASPECT button
Press this button to quickly change the picture format ASPECT ratio.
Depending on the input signal, the picture format ratio allows you to adjust the images through the following options.
4:3

STANDARD

Use this aspect mode to display conventional

4:3

Zoom

Use this aspect mode to zoom in on conventional

(4:3) images.
(4:3) sources.

16:9 STANDARD

Use this aspect mode to display 16:9 sources like HDTV and DVD's preserving the original 16:9 aspect
ratio.

16:9 Zoom

Use this aspect to Zoom-in once while in 16:9 aspect.

(1) NTSC INPUT

INPUT

4:3 STANDARD

16:9 STANDARD

i!,i

16:9 ZOOM

4:3 ZOOM

(2) 480i/480p INPUT

INPUT

4:3 STANDARD

16:9 STANDARD

E
16:9 ZOOM

(3) 720p/1080i

4:3 ZOOM

INPUT

16:9 STANDARD

16:9 ZOOM

HOW TO USE THE REMOTE TO CONTROL YOUR TV
(_)

VIRTUAL HD button
Press this button to toggle between 1080i and 540p.
540p and 1O8Oi represent two ways to display the TV signal.
Progressive: The "p" in 540p tells you that the display is showing you the picture in the progressive format. With the progressive
format the complete picture is created by drawing lines across the screen from left to right which fill the screen from the top to
bottom. If you look very closely at the screen there will be a very small space in between each line.The progressive format is good
for displaying fast moving programs such as a sporting event.
Interlaced: The "i" in 1O8Oi tells you that the display is showing you the picture in the interlaced format. With the interlaced format
the picture is created by drawing lines across the screen from left to right which fill the screen from top to bottom, and then returning
to the top and drawing another set of lines in between the first set. The TV draws the lines so fast that our eyes can't see them. If
you look very closely at the screen you will notice a smoother image than with the progressive format. The interlaced format is good
for displaying detailed images like feature films.
You can compare the progressive and interlaced formats by toggling the "VIRTUAL HD" button on the remote control. Some people
like the crisp picture from 540p and some people like the smooth and detailed 1080i. Hitachi offers you the choice.

NOTE:

The VIRTUAL
Icircuitry
and are
HDshown
butt°n inwill
their
n°tnative
change
1080i
the format.
picture with a 1080i HDTV input" HDTV signals bypass the VIRTUAL HD

INFO button
Press this button when you want to check the channel being received, the picture source, if the channel has stereo (ST) or second
audio program (SAP), the time and CHANNEL ID.
When a COMPONENT
_,_d_
so_t_ s_l Fo,,_t B,o_
AUdio
Br°_dcast"

_ived

St eo (480i)
"_*" ST/SA

Fing

Main

TV*P _ DLSV
PIP TV PG DLSV

is connected to
VIDEO: 1.

PEctuie S .....

Ant A 15
ASCDEFG _" ''_
10:10 AM_
PIPAnt A 10_

VIDEO: Y-PBPR Input

Chann eH D/V_e° ID

--qlme
--PIP/S_b
Pictule
&',urce

Wide

&16:9 SL,3ndar d
HD
Pictur e
Closed
C_ptioaing--

Mode--

Off T_mer-TV T_meLock-

S-VIDEO
Input is connected to
VIDEO: 3.

_'1080i
_Movies
_,CC
On

_*_
_'(_

Off 10:05 AM
T_me Lock 10:05 AM

Main

Picture

PtPlSub-Plcture

EXIT button
When in MENU mode, this button will exit all On-Screen
@

Displays.

LAST CHANNEL (LAST OH) button
Use this button to select between the last two channels viewed. (Good for watching two sporting events, etc.)

.....
..........................
.......

(_PIP
CH button
Use the PIP CH button to select between main picture and sub-picture tuning. The channel number which is highlighted indicates
what channel is being controlled.
MENU button
The MENU button will start the On-Screen

Display.

PICTURE-IN-PICTURE

(P!P)

Your HITACHI Projection TV incorporates Dual Tuner technology designed for improved viewing enjoyment. This Dual Tuner feature allows
you to view antenna inputs on both the main picture and sub-picture simultaneously, with separate tuning control for each. The Dual Tuner
can operate with only one input (ANT A only) or two inputs (ANT A and ANT B).
ANT A input can be viewed as both the main picture and the sub-picture simultaneously. ANT B can only be viewed as a main picture.
To select between main picture and PIP sub-picture tuning, press the PIP CH button on the remote. The green highlighted channel
display will move with every press of the PIP CH button. When the top channel display is highlighted, channel tuning is for the main
picture. When the lower channel display is highlighted, channel tuning is for the PIP sub-picture.
The Picture-in-Picture feature is convenient when you want to watch more than one program at the same time. You can watch a TV
program while viewing other programs from the ANT A source or any of the video inputs.

POWER

CBL/SAT

DVD/VCR

CD
MODE/

i@s.....
..........
@@@

VIDEO

CZ2

PIP CH

MUTE

LAST OH

EXIT

_udb
Video
OIJTpUT

VCR

Use above connection to view VCR program as a sub-picture while viewing another program as main picture (ANT A, ANT B, V:I,
V:2, V:3, or V:5). You may also view the VCR program as a main picture while viewing another program as a sub-picture
(ANT A, V:I, V:2, V:3, or V:5).

(9 PIP button
Press the PIP button and a sub-picture will appear in one of the two different modes (PIP or SURF), depending on the last selection
of the PIP mode. To change the PIP mode, use the PIP MODE button to cycle through the two different modes.
PIP MODE PICTURE-IN-PICTURE
Press the PIP button and a sub-picture appears in one of the two different modes (PIP or SURF), depending on the last selection
of the PIP mode. Press the PIP button again to remove the sub-picture from the screen. Use the PIP CH button to select between
main and sub-picture tuning control (indicated by green highlighted channel display.) Press the VID1, VtD2, VID3, VID4 or VID5
button when sub-picture channel tuning is being controlled, to change between VIDEO: 1, VIDEO: 2, VIDEO: 3, VIDEO: 4 and
VIDEO: 5 and ANT: A source. (ANT B source cannot be viewed as a sub-picture.)

PIP

................
O

NOTES:

............

1. When ANT B is selected as the main channel, the SWAP feature is disabled.
2. Only Sound from the main picture can be heard.
3. To prevent a pattern burn, occasionally move the sub-picture using the CURSOR <, I_, A, _'.

PICTURE-IN-PICTURE

(PIP)

SURF MODE PICTURE-IN-PICTURE
This feature will automatically scan all active channel numbers (those set in memory) and display them as PIP sub-pictures,
the PIP button a second time to remove the sub-pictures from the screen.

Press

PIP

NOTES:

1.
2.
3.
4.
5.

If no buttons are pressed when in SURF mode, auto-scanning will continuously scan channels in memory
(see page 39).
If a channel is tuned during this SURF scanning, sub-pictures will be removed from the screen.
SURF MODE PIP is allowed only when ANT A is selected as the main channel.
If MOVtE/TV RATINGS lock functions setting is ON, SURF mode will be deactivated.
Closed Caption will not appear when SURF mode is on.

SWAP button
If you wishto switch what is being shown on the main pictureto the sub-picture, pressthe SWAP button.

SWAP

PIP

............ @

................

I
I

NOTES:

(_)

2.
1.

The SWAP function will not operate if ANT B input is set as the main channel (ANT B input cannot be displayed as
The
SWAP button will only operate in PIP mode.
a sub-picture.)

I
I

PIP MODE button
To change between the different PIP modes (PIP or SURF) press the PIP MODE button when PIP is ON. Each press of this
button will change PIP to a different mode.

PIP MODES will depend on the type of Main Picture input signal.

PICTURE-IN-PICTURE
PIP
\JTSC (ANT A)
YES
_80i
YES
1-80p
x
720p
x
1080i
x

(PIP) MODES
SURF
YES
x
x
x
x

P!CTUFIE-!N-P!CTURE(P!P)
(_

FREEZE button (With PIP ON)
If you wish to freeze the sub-picture, press the FREEZE button. This is convenient when trying to write down the address for a
mail order company, recording statistics for a sporting event, etc. To return the picture to motion, press the FREEZE button
again.
NOTE:

When PiP is on, the FREEZE function will only operate when PIP mode is chosen.

(_)

FREEZE button (with PIP OFF)
Press the FREEZE button to freeze the picture, depending on the PIP mode selected (PIP Sub Freeze or STROBE Sub Freeze).
To change FREEZE modes, use the PiP MODE button to cycle through the two different modes.
PIP SUB FREEZE (with PIP OFF)
PIP FREEZE should be in PIP SUB mode. Press the FREEZE button to freeze. Press the FREEZE button again to return to normal
viewing.

..............
i!!!i;;_,,
_

..............
i!i!;i_
....

.............
ii!ii_,(_

...........
ili_¸

STROBE FREEZE (with PiP OFF)
PIP FREEZE should be in STROBE mode. Press the FREEZE button to freeze three frames of the picture you are currently
viewing. Press this button again or PIP to return to normal viewing. This feature is useful for viewing a moving picture that has many
details, for example, a close play in a sporting event or a golf swing.

FREEZE

............
.....

............. @

;:;;
I

NOTES:

..............

Each freeze frame is delayed about 0.1 (1/10) second.

]

USING THE REMOTE TO CONTROL VCR FUNCTIONS
Operating the precoded function for your VCR.
This remote is designed to operate different types of VCRs. You must first program the remote to match the remote system of your VCR
(refer to table below for pre-codes).
1.
2.
3.
4.
5.

Turn ON your VCR.
Aim the remote control at the front of your VCR.
Press and release the DVD/VCR button to switch to VCR pre-coded mode.
Hold down the DVD/VCR button on the remote and enter the two digit preset code that matches your VCR, as shown below.
Aim the remote at the VCR and press the POWER button. The remote will turn off your VCR when the correct two digit preset code
is entered. When this occurs, the remote control is programmed for your VCR. If the VCR does not turn off, try a different two digit
preset code.
The remote will now control your VCR.
POWER
7!/

C BL/SAT

DVD/VCR

NOTES:
1.

If your VCR cannot be operated after performing the
above procedures,
your VCR's code has not been
precoded into the remote.
In the unlikely event that your VCR cannot be operated
after performing the above procedures, please consult
your VCR operating guide.
The remote control will remember the codes you have
programmed until the batteries are removed from the
remote control. After replacing the batteries repeat the
entire programming procedure as stated above.

(_)

DVD/VCR Button
This button allows the remote to control your VCR by setting
it to VCR mode.

PRECODED VCR Buttons
These buttons transmit the chosen precoded VCR codes.
For some VCRs, you must press the RECORD button twice
to record a program.

(_)

EXCLUSIVE TV Buttons
These buttons are for operating the TV.
HiTACHi

I NOTE:

Refer to instruction manual of the VCR for operationof the buttons exclusively for the VCR.
27

USING THE REMOTE TO CONTROL CABLE/SATELLITE BOX FUNCTIONS

Operating the precoded function for your cable/satellite

box.

This remote is designed to operate different types of cable/satellite
tem of your cable/satellite box (refer to table below for pre-codes).
1.
2.
3.
4.
5.

Turn ON your cable/satellite box.
Aim the remote control at the front of your cable/satellite box.
Press and release the cable/satellite (CBL/SAT) button to switch to cable/satellite pre-coded mode.
Hold down the CBL/SAT button on the remote and enter the two digit preset code that matches your cable/satellite box as shown
below.
Aim the remote at the cable/satellite box and press the POWER button. The remote will turn off your cable/satellite box when the
correct two digit preset code is entered. When this occurs, the remote control is programmed for your cable/satellite box. If the box
does not turn off, try a different two digit preset code.
The remote will now control your cable/satellite box.
(_D

NOTES:
1.

If your cable/satellite
box cannot be operated after
performing the above procedures, your cable/satellite box
code has not been precoded into the remote.

In the unlikely event that your cable/satellite box cannot
be operated after performing the above procedures,
please consult your cable/satellite box operating guide.

boxes. You must first program the remote to match the remote sys-

POWER

:!i!:ii:ili
:!!

The remote control will remember the codes you have
programmed until the batteries are removed from the
remote control. After replacing the batteries repeat the
entire programming procedure as stated above.

_/_c,)i:i:!;i
m@

CABLE (CBL/SAT) button
This button allows the remote to control your cable/satellite
box by setting it to CABLE/SATELLITE mode.

i!!i!ii;i!;
I

@ PRECODED

CABLE/SATELLITE BOX buttons
These buttons transmit the chosen precoded cable/satellite
codes.

@ EXCLUSIVE

TV buttons
These buttons are for operating the TV.

HiTACHi

1
I NOTE:

Refer to instruction manual of the Cable/Satellite

Box for operation of the buttons exclusively for the Cable/Satellite

Box. 1

USING THE REMOTE TO CONTROL

DVD FUNCTIONS

Operating the precoded function for your DVD player.
This remote is designed to operate different types of DVD players. You must first program the remote to match the remote system of
your DVD player (refer to table below for pre-codes).
1.
2.
3.
4.
5.

Turn ON your DVD player.
Aim the remote control at the front of your DVD player.
Press and release the DVD/VCR button to switch to DVD pre-coded mode.
Hold down the DVD/VCR button on the remote and enter the two digit preset code that matches your DVD player, as shown below.
Aim the remote at the DVD player and press the POWER button. The remote will turn off your DVD player when the correct two
digit preset code is entered. When this occurs, the remote control is programmed for your DVD player. If the DVD player does not
turn off, try a different two digit preset code.
The remote will now control your DVD player.
_POWER

NOTES:
1.

DVD/VCR Button
This button allows the remote to control your DVD player by
setting it to DVD mode.

PRECODED DVD Buttons
These buttons transmit the chosen precoded DVD codes.

(_)

EXCLUSIVE TV Buttons
These buttons are for operating the TV.

NOTE:

DVDNCR

re(i)

If your DVD player cannot be operated after performing
the above procedures, your DVD player's code has not
been precoded into the remote.
In the unlikely event that your DVD player cannot be
operated after performing the above procedures, please
consult your DVD player operating guide.
The remote control will remember the codes you have
programmed until the batteries are removed from the
remote control. After replacing the batteries repeat the
entire programming procedure as stated above.

CB_AT

Refer to instruction manual of the DVD player for operation of the buttons exclusively for the DVD player.
29

ON-SCREEN

DISPLAY (OSD)

1. Press MENU on the remote control to display the different features on your HITACHI Projection TV.
2. Press the CURSOR <, I_, A, •

to highlight a different feature.

3. Press SELECT on the remote control to select the feature chosen.
MENU

4. Press EXIT on the remote control to quickly exit from a menu.
5. Press CURSOR • or I_ to access Favorite Channels menu.

EXIT

This part of the screen shows
which selections are available.

Video

Audio
Ch.

_j
Hanaqer

Locks

Setup

Move _

Sel

] _This

part of the screen
shows which Remote
Control buttons to use.

r"m

ON-SCREEN

Vi deo

DISPLAY (OSD)
Picture Mode

Select between the four picture modes: Sports, Movies, News,
and Music.

Contrast

Adjust contrast.
Adjust brightness.
Adjust color.
Adjust tint.
Adjust sharpness.
Centering top and bottom of the picture.
Set Aspect modes
Automatically change tint and color coordinates for DTV
program.
Improve picture performance.

Brightness
Color
Tint
Sharpness
Vertical Position
Aspect
Color System
Advanced Settings

Tre e
Audio
_hancement
[Advanced Settings

Channel
Manager

AntB

Chanqe Access Code
Engage Lock
TV Time Lock
Movie Ratings

Locks

TV Ratings
Canadian Ratings (ENG)
Canadian Ratings (FRN)

Setup

Adjust the treble.
Adjust the bass.
Adjust the balance.
Set SRS and BBE surround settings.
mprove sound performance.

View/edit Channel ID, Scan, and Lock settings in antenna A.
View/edit Channel ID, Scan, and Lock settings in antenna B.

Change Lock access code.
Choose to lock channel, video input, and front panel.
Set specific time to Lock TV.
Block various types of movies and video types based on motion
picture ratings.
Block various types of movies and television programming
based on a parental guide ratings.
Block various types of movies and television programming
based on the Canadian ratings system.
Block various types of movies and television programming
based on the Canadian French ratings system.

Magic Focus

Automatic or manual alignment of the Red, Green and Blue
colors to make white.

Menu Preference
Set The Clock
Set The Channels

Choose English, French, or Spanish text.
Set the TV clock. It must be set before using Lock/Event Timer feature.
Set Channel Source and Auto Channel Scan.

Set The Inputs
Set Event Timer

Label Video Inputs, VCR, DVD, etc.
Turn TV on and off once, daily, or weekly.
Feature to display dialogue/text.
Information display for this TV.

Set Closed Captions
About You r TV

VIDEO
Video
Picture

Select VIDEO to adjust picture settings and improve picture quality.

Rode

Use this function to choose from automatic picture settings to optimize your TV's performance.

I[c.......

-q 1ioo_
m

_Co_o_
II r_

_ I _1
q F
_1

I
O_o_

irvo_

Use CURSOR •

_o,_,o,,

CURSOR

...................................................
@ .......................................

-4 I o_1

or • to highlight Picture Mode settings.

When SPORTS mode is selected, the following are automatically set:
CONTRAST - 100%, COLOR TEMPERATURE - HIGH, LOUDNESS - OFF, PERFECT VOLUME - OFF, BASS - 63%,
SURROUND - SRS and BBE.
When MOVIES mode is selected, the following are automatically set:
CONTRAST - 60%, COLOR TEMPERATURE - STANDARD, SHARPNESS
PERFECT VOLUME - OFF, SURROUND - SRS and BBE.
NOTE:

- 40%, BASS - 63%, LOUDNESS - OFF,

MOVIE MODE 3:2 PULLDOWN DETECTION SPECIAL FEATURE
Theatrical movies are shot on film at 24 frames or still pictures per second, instead of 30 frames or 60 fields like video. When
film is transferred to video for television viewing, the disparity between the two frame rates must be reconciled. This involves
a process known as 3:2 pulldown.
When MOVIE mode is selected from the Picture Mode menu, your Hitachi Projection Television will activate the circuitry for
this special feature to improve video performance when watching film based sources. This 3:2 pulldown detection will only
work in MOVIE mode.

When NEWS mode is selected, the following are automatically set:
CONTRAST - 75%, COLOR TEMPERATURE - MEDIUM, LOUDNESS - ON, PERFECT VOLUME - ON.
When MUSIC mode is selected, the following are automatically set:
CONTRAST - 75%, COLOR TEMPERATURE - HIGH, LOUDNESS - OFF, PERFECT VOLUME - OFF, SURROUND - BBE.
You can customize each of the above modes (SPORTS, MOVIES, NEWS, and MUSIC) to your preference to increase viewing performance and pleasure, depending upon the video program being viewed. However, if RESET is selected, each mode will reset to the
initial conditions as explained above.
If RESET is selected in SPORTS mode, only SPORTS mode will return to factory conditions.
Press EXIT to quit menu or select PICTURE MODE to return to previous menu.

VIDEO
Use the CURSOR • or • to highlight the function to be adjusted.
Press the CURSOR • or 1_ to adjust the function.
Press MENU to return to main menu or select PICTURE MODE to return to previous menu.
Press EXITto quit menu.
I

Contrast

Brightness

Col or

I Use
this affect
function
changewhen
the contrast
between
black and
white levels
will only
thetopicture
ADVANCED
SETTINGS
DIMMER
is OFEin the picture. This adjustment
I Use this function to adjust overall picture brightness.

I Use this function to adjust the level of color in the picture.

Tint

Use this function to adjust flesh tones so they appear natural.

Sharpness

Use this function to adjust the amount of fine detail in the picture.

I Vertical

NOTES:

Position

I This function allows you to select when aspect style is 4:3 ZOOM. Vertical position can be changed with
this mode. Adjustable range is -10 (video center is toward bottom of screen) to +10 (video center is
toward top of screen).

If CONTRAST is selected, you are adjusting CONTRAST. The additional menu items BRIGHTNESS,
and SHARPNESS can be selected and adjusted in the same manner.

2. It may be necessary to adjust TINT to obtain optimum picture quality when using the COMPONENT
input jacks.

COLOR, TINT,
VIDEO Y-PBPR

3. If you are using the COMPONENT VIDEO input jacks (Y-PBPR) and notice that the TINT and COLOR are abnormal,
check to make sure that VIDEO-Color System is set properly.

VIDEO
I

I
II The ASPECT function is very useful when setting
NTSC signals

Aspect

Aud_e

reception High Definition, Standard Definition and

[_
[;.ow _ so_]

CUaSOR

CURSOR

r v_dee

[video

Q l_
0 _

0 le_e_

Use CURSOR •

sta_rd
Zo_

_e_l

or • to highlight the chosen Aspect Mode settings.

Press the SELECT button to select the Aspect Mode of choice.
4:3 Standard

Use this Aspect Mode to display conventional

16:9 Standard

Use this Aspect Mode to display 16:9 sources like HDTV and DVD's preserving the original 16:9 aspect ratio.

4:3 Zoom

Use this Aspect Mode to zoom in on conventional

16:9 Zoom

Use this Aspect Mode to zoom in once while in 16:9 aspect.

1080i Real

Use this Aspect Mode to allow 1080i signals to appear on the TV screen as the broadcaster

NOTE:

(4:3) images.

sends them.

Depending on the input signal, some of the Aspect features will be grayed out. This means that the feature is not
available with the signal input.

VIDEO
Color

System

I This function allows you to automatically change tint and color coordinates for DTV programs.
HDTV - High Definition Television - Use for High Vision Signal Y-PBPR from HDTV Set-Top Box.
SDTV/DVD - Standard Definition Television or DVD (Digital Versatile Disc Player)

NOTES:

Y-CBC

If Color System is set improperly (does not match actual input signal), the color and tint of the main picture will be
abnormal.

You must be tuned to VIDEO: 1 or 2 inputs and have a component hooked up to the Y-PBPR input jacks to access this
color system.
All component color type settings will affect only color component input you are currently viewing. If you are using
both sets of component input jacks, be sure to set the color system feature for both inputs.

Your HITACHI Projection TV has an ADVANCED SETTINGS function which will automatically adjust picture
settings to produce the highest quality picture possible.
When ADVANCED SETTINGS is highlighted, press SELECT or CURSOR to access an ADVANCED
SETTINGS feature.

Advanced
Settings

CURSOR

II Color

sv_m

CURSOR

video

Color
O_gh

v_deo
¢olor

Tempe_at_
OMedlum

OSta_dar4

_
Temper_ur_

OHigh

O_e4_m

OStan_dU

OURSOR
0 Aut_
0 No_se

_Auto

Color
Reduction

0 Sca_

Velocity

0 8lack

Level

Noise

Mod_lat_o_

_Sc_n

Color
Reduction
Velocity_elation

Expan_ion

Use CURSOR ,_, • to highlight functions.
Press the SELECT button to select the function setting. When the function has an ",/" in the box, it is ON.
Press the SELECT button to change COLOR TEMPERATURE setting. When the function shows a "®", it is selected.
Press EXIT to quit menu or CURSOR _1to return to previous menu.
Color Temperature
Set this to High for less intense
standard colors.

colors with more blue, set to Medium

for hotter colors with more red, or set to Standard

Dimmer
Turn ON the DIMMER function to reduce picture contrast and brightness automatically

for

when viewing in a dark room.

Auto Color
The AUTO COLOR function automatically monitors and adjusts the color to maintain constant color levels even after a program or
channel changes. It also maintains natural flesh tones while preserving fidelity of background colors.
Noise Reduction
The NOISE REDUCTION function automatically
reduces conspicuous
noise in the picture without
When the Noise Reduction feature is ON, the Sharpness feature is disabled.
Scan Velocity Modulation
The SCAN VELOCITY MODULATION function automatically
Black Level Expansion
The BLACK LEVEL EXPANSION

function

automatically

degrading

enhances the edges between light and dark areas.
enhances

shadow detail in dark scenes.

picture

quality.

AUDIO

Audio I

Select AUDIO to adjust the TV to your preference and to improve the sound quality.

[ Vi de,3

E_
E.....

_ E_

3
I $oun_ _nh_nc_m_nt
A_wnce_

Settlnas

Audio

CURSOR

Treble

E S_[

Use CURSOR A, • to highlight functions.
Press the SELECT button to select the function setting.
Press CURSOR _1 or I_ to adjust the function.
Press EXIT to quit MENU, or select Audio to return to the main menu.
NOTE:

If TREBLE is selected you are adjusting treble. The additional menu items Bass and Balance can be selected and
adjusted in the same manner.

Treble

Bass

Balance

This function controls the high frequency audio to all speakers.

This function controls the low frequency audio to all speakers.

This function will control the left to right balance of the TV internal speakers and the AUDIO TO HI-FI output.

AUDIO
I

Sound

Enhancement

The following surround settings
sports stadiums, movie theaters,

will reproduce the "live" sound
etc. with only two speakers.
ILA_a_o

I Aud ¸io

IE_ .....
I

halls,

DSRS

CURSOR

D£SE

t4ove

To enter SOUND ENHANCEMENT,
ENHANCEMENT of your choice.

you would hear in concert

Return

use CURSOR • or • to highlight then press the SELECT button to select SOUND

Press CURSOR • or • to highlight your sound enhancement

choice, and press the SELECT button to select your choice.

SRS(O_
Based on the principles of the human hearing system, SRS technology delivers and exciting and realistic 3D Sound experience from
just two external speakers (or) the two internal speakers of your HITACHI Television. If your HITACHI Television is connected to an
external audio system, SRS will also create an incredible 3D sound experience from two speakers and even enhance a complete
multi-speaker surround sound system.
NOTES: *SRS and the (_)
symbol are registered trademarks of SRS Labs, Inc. SRS technology
from SRS Labs, Inc.

is incorporated

under license

_'
Technology
Sound reproduction quality enhancement system. The BBE technology produces sound that is natural and crisp from just two speakers (or) the two internal speakers of your HITACHI television. If your HITACHI television is connected to an external audio system,
BBE will also create an incredible crisp sound experience from two speakers and even more complete and accurate reproduction of
the original performance. BBE brings to the listener's ear a more complete and accurate reproduction of the original performance.
Each voice, speaking or singing, each instrument or sound effect is presented with its attendant harmonics or partials more clearly
audible. The ear can then more easily recognize the unique tonal colors of each sound as though the sound was being produced live.

NOTES:

Licensed by BBE Sound, Inc. under USP4638258, 5510752 and 5736897. BBE and BBE symbol are registered
trademarks of BBE Sound, Inc. Manufactured under license from BBE Sound, Inc.

AUDIO
Advanced
Settings

Use ADVANCED SETTINGS to improve the sound performance of your TV, depending on listening conditions.

IFA.d_o
II
T_b_
IIB_

[Audto

_IEs_I
_ E_I

A_dlo

Source

[_S_ereo

OHono

O2nd

Audio

Pro_.]

CURSOR
O_
[In_ernal
D Auto
D perfect

OOff
Speaker_
No_se

Can_el

Volume

B Lo_dne_

Press CURSOR •
the box it is ON.

or • to highlight a function. Press the SELECT button to select the function setting. When the function has a ",/" in

Audio Source
Multi-Channel Television Sound will allow you to select STEREO (a stereo broadcast), MONO (monaural sound) used when receiving a
weak stereo broadcast or SAP (second audio program) which may be a secondary language, weather report, etc.
The mode you select will be displayed at the left edge of the TV. The source received will be displayed above the mode. See example
below for each selection when both stereo and second audio are received (monaural is always received).
STEREO

SELECTED

SAP SELECTED

MONO SELECTED

Audio

Internal Speakers
On - Select this feature if using only internal speakers.
Off - Select this feature if you prefer to use only speakers from a separate stereo system.
Auto Noise Cancel
This function eliminates the noise between stations. If a channel is tuned and is noisy, this function will automatically
for that channel.
Perfect Volume
This function will automatically

adjust volume so each channel has the same average volume level.

Loudness
This function will improve the quality of both low and high frequency sounds when listening at low volume levels.

eliminate the audio

CHANNEL

MANAGER

Chan nel

This function allows you to review which channels are labeled (CH ID), which have been added to Channel Memory

Manage r

(SCAN), and which are protected by LOCK.

IIAntB

;4
CURSOR

¢H#

Scan

¢H ID

Press CURSOR • or • to review more channels.
Press EXIT to quit menu.

Scan

I Use
this feature
Auto Channel
Scan is completed to add (On) or skip (Off) additional channels to
the remote
controlafter
channel
• or • buttons.

Lc_ _n_ e_

I
IIAntA
CH#

Off
Off

Off

CH#2
7

[ _

.......

S_anOff
Off

CH ID

_1
Scan

CH ID

off

........

off

........

off

.......

off

........

off

......

Off

off

........

Off

....

I € _ove

_ _?<_,_

....... _j

Retur_

CURSOR

E_I
r ....

[

......

[

off

CURSOR

]

Off

off

Off

off

Off

off

Off

off

C_#
7

Scan
Off

off

Off

off

......

.'Set

I ,w_ove

€set

Retur_

I "'_ove

CH ID

Retur_

To add (Scan-On) or skip (Scan-Off) additional channels while in Channel Manager, CURSOR • to highlight the channel number, then
CURSOR • or • to highlight other channels. Once the desired channel is highlighted, CURSOR • to scan column, then CURSOR •
or • to select ON or OFE

I NOTE:

Lock feature can not be selected or set in CHANNEL MANAGER.

CHANNEL
Channel

MANAGER

This selection contains advanced features which will make TV viewing easier and more enjoyable. Use
this feature to give up to 20 channels a name when ANTENNA signal source is selected and up to 60
channels a name when CATV signal source is selected.

r ....

O4#

Scan

[
CURSOR

CH ID

...... _j
CURSOR

,, o.O"
6

Off

8
9

Off
Off

........

CURSOR

A_L

[

Off

_ ...... J

Off

CH#
7

Scan
Off

........
CHID

Off

........

Off

qb_ove

NOTES:

_Edlt

£,

)

Ret#rt_

If ANT A and ANT B are in the same ANTENNA/CABLE
same.

CHANNEL ID will be displayed only when channel is displayed as main picture.

mode, the CHANNEL ID for both antenna inputs will be the

LOCKS
This function will block out the picture and sound of the selected channel or video input.
It can also be used to keep the TV from being viewed for a scheduled time period that you set.

Locks

The code to enter the Locks feature is a four digit secret code number. The factory preset code is 0000.
Use the number buttons to select access code.
waeo

E_
CURSOR

.........
i_i,;i__)

_=i;iii
¸....

................................
ii_

E_
Uch,nq_
E_

_qe

_cc_,.

coa_

LOCk

_ _tinqs

Can,d_n

_tinqs

_nq)

Use CURSOR • or • to highlight function and then press the SELECT button.
To change the access code number, select Change Access Code. Enter a new four digit key number you prefer.
Select CHANGE ACCESS CODE to change factory preset code (0000) to your preference.
When ENGAGE LOCK is selected, SET CHANNEL LOCK, SET INPUT LOCK, and SET FRONT PANEL LOCK can be set individually.
When SET CHANNEL LOCK is turned on, the picture and sound for the chosen channel will be blocked out.
When SET INPUT LOCK is turned on, the picture and sound for all video inputs and the picture and sound for channels 3, 4 will be
blocked out.
When FRONT PANEL LOCK is turned on, all buttons on the Front Panel will be deactivated, except the Power button.
When TV TIME LOCK is turned on (_1TIME LOCK) you can set the BEGIN and END times (CURSOR I_) and the TV
cannot be viewed during that time period (Set clock first). Use CURSOR • or • to highlight ONCE (TV will time out one time
only), DAILY (TV will time out every day), WEEKLY - SUN-WEEKLY
- MON (TV will time out one time a week) or OFF (to disable this function).
When MOVIE RATINGS is selected, you can block various types of movies and video tapes based on motion picture ratings. Picturein-Picture will also be blocked automatically (see page 42).
When TV RATINGS is selected, various types of television programming based on a parental guide ratings will be blocked.
Picture-in-Picture will also be blocked automatically (see page 43).
Use CANADIAN RATINGS to block various types of movies and television programs based on the two rating systems used in
Canada that you feel may be inappropriate due to its content (see pages 44-45).
If you forget your secret code, use the factory code 7777 to erase your key number. This will reset the secret code number back to the
factory preset 0000.
Press EXIT to quit the menu.

NOTE:

1. If ANT A and ANT B are in the same signal source mode (see page 51), when a channel is locked, it is locked
on both antenna inputs.
2. When using TIME LOCK make sure the clock is set (see page 50).
3. Text appears on the screen to indicate that TV TIMED LOCK is activated.
4. If MOVIE/TV Ratings Lock and Closed Caption settings are ON, PIP SURF mode will be deactivated.

LOCKS
Movie

Ratings

Use MOVIE RATINGS to block from showing any movie you feel might have inappropriate
content.

[[ _an_

AccEss C_d_

IFE_

Lock
Not

[[ TV _t_m_ L_ck

Ra_ed:

CURSOR

I
CURSOR
[[_nadlan

Rati_s

(_g)
NC-17:

Use CURSOR • or • to select the MOVIE RATING category that you want to block.
Press SELECT to block the MOVIE RATING that you have selected. Once rating is selected, for example PC-13, all
movies rated PC-13 and higher (R, NC-17, and X) will be blocked.
Press EXIT to quit menu or select MOVIE RATING to return to the previous menu.
Motion Picture Ratings Chart

General audiences. All ages
admitted.
Parental guidance suggested.

Some material may not be suitable
for children.
Parents strongly cautioned. Some

PC-13

material may be inappropriate
children under 13.

Restricted. Under 17 requires
accompanying parent or adult
guardian.

for

No one 17 and under admitted.

NC-17
X

NOT RATED (NR)

Adults only
Contains no rating. Not Rated
(NR) and Not Applicable (NA) programs. Movie has not been rated or
ratings do not apply.

LOCKS
TV

Ratings

Use TV RATINGS to block from showing any programs or movies you feet might have
inappropriate content.

i (hanqe Acces_ (one
_ta_u_

Sub
•

CURSOR

i Movie _ati_q_
U (_n_di_n

_tlnqs

TV_Y:

CE_a)

[:Mow_S_ ¸_c_

Ftat_ _
S

]

y7:

yG:

pG:

TV 14:

TV MA: 6
r4ove

Returt_

Use CURSOR • or • to highlight the category that you want to block.
Press SELECT to block the TV RATING that you have selected.
Press EXIT to quit menu or select TV RATING to return to the previous menu.
"IV Parental Guide Ratings Chart

TV-Y

TV-Y7

All children. The themes and elements in this
program are specifically designed for a very
young audience, including children from ages
2-6.
Directed to older children. Themes and elements in this program may include mild physical or comedic violence, or may frighten children under the age of 7.
General audience.

TV-G

Parental

TV-PG

It contains little or no vio-

]ence, no strong language, and little or no sexual dialogue or situations.
guidance suggested. The program

may contain infrequent coarse language, limited violence, some suggestive sexual dialogue
and situations.

TV-14

Parents strongly cautioned. This program
may contain sophisticated themes, intense
sexual situation, more intense violence and
intensely suggestive dialogue.

TV-MA

Mature audiences only. This program may
contain mature themes, indecent language,
graphic violence, and explicit sexual content.

Fantasy Violence

Violence

Sexual Situation

Adult Language

Sexually Suggestive

Dialogue.

NOTE:
If you Block TV-14D, you wilt still permit
TV-MA programs; If you block TV-14DV,
you will automatically block TV-MAV
programs, but you will still permit TVMALS programs. This means that the TV
will block violence in TV-14 and higher
(TV-MA), but not language and sex.

LOCKS
Canadian Ratings
(Eng)

Use Canadian Ratings (Eng) to block any type of movie and television program in Canada that
you feel might be inappropriate in its content.

Locks

_Lo_ks

C_a_ae

Acce_

E_age

Leek

TV T_me

CURSOR

Movie

Lode
Status

Leek

CURSOR

R_i_s

C8÷:

TV Rati_qs
PG_
t4÷:
Move

Select

]

a
a

t8+:

[ _ Move _

Return

Use CURSOR • or • to select the CANADIAN RATINGS (Eng) category that you want to block.
Press SELECT to set the CANADIAN RATINGS (Eng) that you have selected. Once rating is selected, for example C8+,
all movies and television programs rated C8+ and higher (G, PG, 14+ and 18+) wilt be blocked automatically.
Press EXIT to quit menu.

Canadian

Ratings English Chart

Programming intended for children under age 8 - Violence Guidelines; Careful
attention is paid to themes, which could threaten children's sense of security and wellbeing. There will be no realistic scenes of violence. Depictions of aggressive behaviour will be infrequent and limited to portrayals that are clearly imaginary, comedic or
unrealistic in nature. Other Content Guidelines: There will be no offensive language,
nudity or sexual content.

C8+

Programming generally considered acceptable for children 8 years and over to
watch on their own - Violence Guidelines: Violence will not be portrayed as the preferred, acceptable, or only way to resolve conflict; or encourage children to imitate dangerous acts which they may see an television. Any realistic depictions of violence will
be infrequent, discreet, of low intensity and will show the consequences of the acts.
Other Content Guidelines: There will be no profanity, nudity or sexual content.

General Audience - Violence Guidelines: Will contain very little violence, either physical or verbal or emotional. Will be sensitive to themes which could frighten a younger
child, will not depict realistic scenes of violence which minimize or gloss over the effects
of violent acts. Other Content Guidelines: There may be some inoffensive slang, no
profanity and no nudity.

Parental Guidance - Programming intended for a general audience but which may not
be suitable for younger children. Parents may consider some content inappropriate for
unsupervised viewing by children ages 8-13. Violence Guidelines: Depictions of conflict
and/or aggression will be limited and moderate; may include physical, fantasy, or supernatural violence. Other Content Guidelines: May contain infrequent mild profanity, or
mildly suggestive language. Could also contain brief scenes of nudity.

14+

Programming contains themes or content which may not be suitable for viewers
under the age of 14 - Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and early teens. Violence Guidelines: May contain intense
scenes of violence. Could deal with mature themes and societal issues in a realistic
fashion. Other Content Guidelines: May contain scenes of nudity and/or sexual activity.
There could be frequent use of profanity.
Adult - Violence Guidelines:

18+

May contain violence integral to the development of the

plat, character or theme, intended for adult audiences. Other Content Guidlines: May
contain graphic language and explicit portrayals of nudity and/or sex.

LOCKS
Canadian Ratings
(Frn)

Use CANADIAN RATINGS (FRN) to block Canadian French programs according to various program ratings that you feet might be inappropriate in its content.

Locks

I ¢ha_qe Acce,s ¢o_e
Status
TV lime

Lock

CURSOR

CURSOR
l TV _ar_nq_
II ¢anadla_

Ratings

(Eng)

ans÷:

ans÷_

Use CURSOR • or • to highlight the category that you want to block.
Press SELECT to set the CANADIAN RATINGS (FRN) that you have selected.
Once rating is selected, for example 8 arts+, all movies and television programs rated 8 arts+ and higher wilt be
automatically blocked.
Press EXIT to quit menu or select CURSOR • to return to the previous menu.
Canadian

Ratings French Chart

General - Programming intended for audiences
of all ages. Contains no violence, or the violence content is minimal or is depicted appropriately with humor or caricature or in an unrealistic manner.

8 ans +

8 + General - Not recommended for young
children - Programming intended for a broad
audience but contains light or occasional
violence that could disturb young children.
Viewing with an adult is therefore recommended
for young children (under the age of 8) who cannot differentiate between real and imaginary
portrayals.

13 ans +

Programming may not be suitable for children under the age of 13 - Contains either a
few violent scenes or one or more sufficiently
violent scenes to affect them. Viewing with an
adult is therefore strongly recommended for children under 13.

16 arts +

Programming is not suitable for children
under the age of 16 - Contains frequent scenes
of violence or intense violence.

18 ans +

Programming restricted to adults - Contains
constant violence or scenes of extreme violence.

SETUP
I Setu P II

Select SETUP
function
desired.when setting your TV up for the first time. Use the CURSOR • or • on the remote to highlight the

iFv_a_o

I
_aic

Audio

Lo_ks

Move _

CURSOR

]

_ocus

Set

The

Clock

Set

The

Channels

Set

The

_n_t_

Set

Event

Set

Closed

About

Your

Ti_er
¢_ptlons
TV

]

Use CURSOR •

or •

to select the sub-menu of your choice.

SETUP
Magic

Focus

[

Auto Digital Convergence Adjustment
Please turn ON your television for at least 20 minutes before using this feature.
The Magic Focus button on control panel will not work when adjustment mode is set to Manual (see page 48).
Your HITACHI Projection TV has three color projection tubes: one for red, one for green, one for blue. When mixed together in the proper
proportion, the output of these three color tubes can produce any color. To produce these colors, however, the beams must be precisely
aligned over each other so that the colors can be mixed. The process of aligning these picture beams is called "convergence".
Over a period of time, the picture tubes can drift out of alignment due to normal bumps and vibrations or moving the TV. If you move
your TV, or if, after a time, you notice color rings or halos around objects in the picture, you may want to converge (align) the colors.
Properly converged, the lines appear white, which is actually a combination of the outputs of the three color tubes. The output of the
green tube is stationary. The outputs of the red and blue tubes can be adjusted. When properly aligned, the outputs of all three tubes
should be directly over each other to produce the white lines.
To simplify convergence, HITACHI incorporates a function called MAGIC FOCUS located on the front control panel, which allows the TV
to self-adjust. Press this MAGIC FOCUS button and the convergence self adjustment will start and this process will take approximately
20 seconds. If this button is pressed during this process, no change in picture quality will occur. After this 20 second self-adjust period,
picture quality will be optimum. (Do not move the TV during self-adjust.)

........... ...........

MAGIC FOCUS
IIIIIIIIIIII

MAG_]OC

.............
I

NOTES:

Only a momentary press of the MAGIC FOCUS button is necessary to start AUTO DIGITAL CONVERGENCE.
At any
time during this convergence correction process, you may press the MAGIC FOCUS button to exit the MAGIC FOCUS
mode. However, the convergence correction process needs to be completed to SAVE the new corrected convergence data.

You may also select Magic Focus from the SETUP menu.
Video

¢_

Ma_a er

i
FEset The Clock

Leck_

_ove

Sel

CURSOR

[

_$et

Event Ti_er

_$et

Closed

I; _w_

Setu

_he

Red

Gree_,

.....

A_ig_

¢aptlons

_nd

B_ue

CURSOR
A_j_men_

Mode

_anua_

liiiiiiiiiii
MAGIC
[ _ Move

FOCUS

Ret_r_

-1
47

[

SETUP
Manual Convergence
NOTES:

1.
2.

Adjustment

Mode

Please turn ON your television for at least 20 minutes before using this feature.
Auto Adjustment Mode is recommended. If convergence is still not acceptable, use the Manual Adjustment
DO NOT press MAGIC FOCUS or use Auto Adjustment Mode after using Manual Adjustment Mode.

Using the Remote Control, select VIDEO-MAGIC FOCUS-MANUAL ADJUSTMENT
pattern. The adjustment point is indicated by the Adjustment Point Cursor.

MODE-START

to access convergence

Mode.

crosshatch

To Move Adjustment Point
To move the Adjustment Point Cursor, use the CURSOR buttons. The Adjustment Point Cursor must be WHITE.
Another way to move the Adjustment Point Cursor is to press the followiing buttons: [2] up, [4] left, [5] down, [6] right. If you use the
number buttons while the adjustment point is WHITE, it will change to RED.
To Change the Color of Adjustment Point
Press the SELECT button repeatedly (WHITE-RED-BLUE-WHITE...).

Green color is fixed and cannot be adjusted.

To Adjust the Convergence
Move the Adjustment Cursor to the point to be adjusted. Use the CURSOR 4, I_, A • to match the RED and BLUE colors to GREEN
(reference color). Properly aligned, all three colors should appear white.
[video

L r4en_ pref_r_e

ELoc_

[[ set

cl_k

CURSOR

Adjustment Point
Cursor

[ setup

Aligns
the _ed
colors
to correct
Influences¸
Adjustment

Green
for

and Blue
_agnet_c

CURSOR
t4ode
i,

M_nu_l
Auto
If

If convergence

you want

_just

adjustment, press EXIT button to access menu mode.

DONE
EXIT

CANCEL
INI.

RESET

BACK

remote
remote
remote
remote
remote

now_

is acceptable after Manual Convergence

Press the [1] button on the
Press the [2] button on the
Press the [3] button on the
Press the [4] button on the
Press the [9] button on the
the factory pre-set data.

control
control
control
control
control

to
to
to
to
to

[1]

[2]

[3]

[4]

SAVE adjusted data and return to main picture.
CANCEL adjusted data and return to main picture.
recall the factory pre-set convergence data.
return to the manual convergence adjustment mode (crosshatch pattern).
read the SAVED adjusted data. If there is no saved data, pressing the [9] button will recall

SETUP
Menu Preference

This feature

will allow you to select any one of three different

Se_

ILs_Th_(lo_k

languages

The

Lam_u&ge

The

Mem_ Background

_E_#_i_h

CURSOR

Se_

O Fra_cai_

_Shaded
[ _ MOV_ _eturn

II set

(l_ed

(_pti_ns

I; Mow_ Ro_oro

_M_n_ Prefe_en_e_

_j
OEspa_ol

Se_

The

_Shade

L_0_Mow

0 Solid
Me_
_a_kgro_d
Select

Use CURSOR •, 1_ to highlight the language of your choice.
Press SELECT to select the highlighted language.
Press EXIT to quit menu or select MENU PREFERENCE to return to previous menu.

for all on-screen displays.

O Espa_ol

SETUP

Set The
Background

This function allows you to choose from two menu backgrounds.

Se_

The

Language

_Engllsh
SeS

[._Move

The

Me_

O £_pa_ol

Background

Select

Use CURSOR •, 1_ to highlight SET THE MENU BACKGROUND (shaded or solid), and press the SELECT button to select setting.
Press EXIT to quit menu or CURSOR • to return to previous menu.
Select SOLID for a black background (no picture can be seen behind menu screen), or select SHADED for a light background.

Set

The

C1ock

The time must be adjusted before you can use the "Set Event Timer" or "TV Time Out" features.

Sel"up

CURSOR

_Set_p
Set

The

C_ock

_ve

_Set

R_ur_

Use CURSOR • or • to set the time and date.
Press CURSOR • or I_ to change position.
Press EXIT to quit menu.

T_e

Su_

SETUP
Set

The Channel

Select ANTENNA if you are using an indoor or outdoor antenna.

I SetuP
I1 M_glc

Set

Select Cable if you have cable TV.

Focus

The

IL A,_t B

Clock

CURSOR
II Set

The Inp_

II set

Eve_ Timer

Set

Closed

C_#tio_

ESetuP

[ Setup

I Set
II_ 4_,_A_

The

Chan_e_

½_
So_r_e

IF An_B

CURSOR

[_Ante_a
A_to

O Cab_e(1)
Cha_el

S_a_

O Cable(2)
_

CURSOR

[" set T_e C_a_e_

OCa_le(t)
A_to

Ch_#nel

I @_ove

OCable(2)

S_an

If certain CATV channel's

Select

picture are poor or unable to
be viewed in Cable (1) mode,
NOTE: select Cable (2).

Use CURSOR _1, I_ to highlight the correct signal mode.
Press the SELECT button to select highlighted signal.
Press EXIT to quit MENU or select ANT A to return to previous menu.
RECEPTION

BAND

CATV 1 OR CATV 2
AIR

CATV CHANNEL

Indicated on

VHF 2~13

the screen
2~13

Refer to your cable or TV guide for channel identification standards.

14 ~ 22

VHF 2 ~ 13ch

Mid band A~I
A-5 ~ A-1

95 ~ 99

UHF 14 ~ 69ch

Super band J~W

23 ~ 36

Hyper band

37 ~ 64

W+l

Reception channels for each mode are shown at the left.

~W+28

Ultraband
W+29~W+84

65 ~ 125

SETUP
This feature will automatically store active TV channels in Auto Channel Scan. This will allow you to skip
unused channels when using CHANNEL UP (A) or DOWN (V).

Auto Channel Scan

I[s_.p

_SetuP

II Set 1he Cha_els

I set

Source

11
The Channels

_Antenna
Auto

C_anne_

I _" Move

Source

Scan

Auto

Select

_ Cable(1)
Cha_el

I _ ,'4ore _

0 Cable(2)

Scan

Selec_

Setup

i Set 1he Ch_els
[A_to
Scanning

Cha_nel
Channe_

S_an
N_mbe_

_¢ance_

If the EXIT button is pressed while AUTO CHANNEL SCAN function is engaged, programming will stop. If two antenna
connected, switch antenna inputs with the ANT button and repeat AUTO CHANNEL SCAN for the second antenna input.
Remember to select the correct ANTENNA/CABLE
mode before using AUTO CHANNEL SCAN.
See CHANNEL MANAGER - SCAN to add or to skip additional channels (see page 39).

are

SETUP
Set

The

Inputs

Use this feature to give a name to any of the five video inputs.

i _4aqic Focus
II _4enu I'reference

IIv_deol

£ena_e

II Set The ¢loc_

IIv_deo2

£ena_e

II Set The Channels

_v_deo2

Auto

U Jet Event Ti_er

_
_
£ink

IIW_deo3 £ena_e

_W_deo4

£ena_e

i Abo_t Your TV

I VI _leo2 Ret_e
L video2

A_o

_ vl_eo3

Re_a_e

)1
Llt_k

0 CA_

0 DVO2

0 VCR

0 CSL

0 L_

0 VCR1

O DVD

O _AT

CURSOR

O VCR2

_CC
Clsl"
DVD&

[ _ _ve

Select

]

Press CURSOR A, _', _, I_, to highlight the name of the video inputs.
Press the SELECT button to select desired input name.
Select RESET to set video names to original factory preset condition.

Move

_TB

Re_u_-_l

Reset

SETUP
Video

2 Auto

Link

]
_ Use this function to automatically
J input 2.

turn the TV on and tune to Video2 when it detects a video signal to

[_]
I s_t Th_ _p_ts

Se_ 1he _nputs

II Video1

iZenar_e

II Video2

iZenar_e

O Auto

IIvideosRe_a=e

I_puv

O Remote

Signal

Cont_ot

Sen_or
Sensor

[Evi deo4 iZenar_e
[-Videos

Renar_e

[ _ Move _

_Video2
OAuto

I _ve

Select

Auto
Z_pu_

]

Link
S_gna_

_ow

Retur_

_1
Se_o_

select

Use CURSOR • or _', then press the SELECT button to change AUTO LINK setting.
When AUTO INPUT SIGNAL SENSOR is selected, the TV will turn on and tune to Video2 automatically, when the Video2 input device
is turned on. This is convenient when you want to watch a movie with your VCR, laserdisc player, or DVD player.
When REMOTE CONTROL SENSOR is selected, the TV will turn on and switch to Video2 automatically
is turned on and the VCR, laserdisc, or DVD play button on your remote control is pressed.
This is convenient when you want to record a movie with your VCR and watch it later.

when the Video2 input device

Select Off to disable this function.
Press EXIT to quit menu.

NOTES:

Once the TV has been turned on using the AUTO LINK feature, it must be reset before AUTO LINK is used again. To
do this, turn your VCR, laserdisc, or DVD player OFR This feature is now reset and will turn on your TV as described
above.

When using REMOTE CONTROL SENSOR mode, any remote control button will substitute for your video input device

play button. However, intended operation is for use with your VCR, laserdisc, or DVD play button.
If no remote control button is pressed after the TV is turned on by AUTO LINK, the TV will automatically
three hours.

turn off after

SETUP
Set Event

Thisfunctton
week.

Timer

willautomaticallyturnthe

Projection

TV on and off, onetime

only, every day, oronce

If the clock is not set, you can not use this function and the screen below will appear. The message on the screen will disappear after
3 seconds, then the screen automatically goes to the clock setup mode (see page 50).

Plea=e

Set

Clo¢k

F{rst.

[U Ewnt
I[ set

Ant

C1_
CURSOR

_
A

[U Ewnt
Ant

2
A

[U Ewnt
set

cl_e,_

M°v_ _

Ant

_°t_r_

AM_

Once
:

:
Once

_
_

AM_

AM_
Once

CURSOR

[FSel_ Event

Ti_er

Use CURSOR • to select Event 1, 2 or 3.
Use CURSOR 1_ to change position of On time, Off time, Antenna, Channel, and On/Off Frequency.
Use CURSOR • or • to select the time the TV will turn on and off.
Use CURSOR • or • to select the day of the week you want the timer to turn on TV.
Use number buttons to set the channel the TV will tune to when it automatically turns on.
Use CURSOR • or• to select mode Once (TV will turn on/off one time only), Daily (TV will turn on/off at the same time every day), or
Weekly-SUN (TV will turn on/off at same time every week).
Press EXIT to quit the menu.
NOTE:

,_AUTION:

1. The Off Timer will only activate if the TV was turned on by the On Timer and no channel selection was
made after this time. If you change the channel after the On Timer has been activated, the Off Timer will deactivate.
2. If no remote control button is pressed after Event Timer is activated, the TV will automatically turn off after three hours.
Therefore, do not Set Event Timer for more than three hours if you do not plan to control your television with the remote
control.

should be turned off when you are away from home.
Do not use your TV as a deterrent when away from home by using the On and Off Timers.

For safety, the TV

SETUP
Closed

Closed Captions

Caption

are the dialogue, narration,

which are displayed

on the TV screen.

Your local TV program guide denotes these programs as _

I
Maalc

and/or sound effects of a television program or home video

Setup

_ocus

Menu _,reference
Set

The

Clock

Set

The

Channels

Set

The

_nputs

Caption

Mode:
Channel:
Caption_

[ # Mow

Caption Display: On/Off will turn the _
Auto will turn the _=_
Mode:

Captions

Oisp_ay

CURSOR

About Your TV

Caption

_ Cap_ions
@ i O 2

O 3

Return

display on or off.
display on when Mute/Soft Mute is on.

is for the program you are viewing.

Text is for additional information

such as news reports or a TV program guide.

This information

screen and viewing the TV program is not possible. Text may not be available with every _'_
CHANNEL:

1
2
3
4

is
is
is
is

used for the primary
sometimes used for
sometimes used for
sometimes used for

covers the entire

program.

language (usually English).
a second language (may vary by region).
a third language (may vary by region).
a fourth language (may vary by region).

Use CURSOR A, • to highlight the function to change then press the SELECT button to change the function.
Press EXIT to quit menu or CURSOR • to return to previous menu.

NOTE:

About

1. CAPTION DISPLAY will not work when viewing a 480p, 720p, or 1080i input via the COMPONENT: Y-PBPR inputs.
2. When PIP Surf is on, Closed Caption will not work.

Your

The TV model name and set dimensions will be displayed on the TV screen. The set dimensions of each TV
model are listed on page 60.

II _a_ic

Focus
Mode3:

i set The Clock
CURSOR

i Set The C_ann_ls

Dimensions

(E_ches)

Height:

I
I_ M°w_tur_

Depth:

_ /

I
_ove

(mm)
_ /

R_tur_

CARE OF YOUR HITACHI TELEVISION
AND YOUR REMOTE CONTROL

Dust the screen and cabinet with a soft cloth.

Clean the screen with a soft cloth moistened
the screen is extremely dirty.

in warm water and dry with a soft cloth. A mild soap may be used if

Place your Television away from extreme heat, humidity, and extremely dusty places.

Remove the plug from the wall outlet if your Television will not be used for a long period of time, for instances,
when you go on vacation.

DO NOT

Do notcleanyourscreenor cabinetwithstrongcleaners,
polishesora chemically
treatedcloth.

Do notplacerubberor vinylproductsor cellophanetape on yourTelevision.

Do not touch the screen too often.

Do not subject the remote control to shocks such as dropping it on the floor, etc. Physical damage to the precision
parts may result.

Avoid placing the remote control in a high humidity place or getting it wet.
Excessive heat or moisture may cause the unit to cease operation.

Do not leave it on or near a heater.

When the batteries run down, remote control operation will become erratic or possibly stop altogether.
old batteries with two new "AA" size batteries. Do not use an old battery with a new battery.

Replace the

Exposure of the viewing screen to prolonged direct sunlight or heat may cause the screen to permanently
resulting in a distorted picture.

warp,

Reception Problems
• IGNITION NOISE:
Black spots or horizontal streaks may appear, picture may flutter or drift.
Usually caused by interference from automobile ignition systems, neon
lamps, electrical drills, and other electrical appliances.

• GHOSTS:
Ghosts are caused by the television signal following two paths. One is the
direct path and the other is reflected from tall buildings, hills or some other
objects. Changing the direction or position of the antenna may improve
reception. Ghosting may also be caused by defects in the antenna system
such as unshielded leads or connecting several sets to the same antenna
without using multiple antenna couplers.

• SNOW:
If your receiver is located in the fringe area of a television station where the
signal is weak, your picture may be marred by the appearance of small
dots. When the signal is extremely weak, it may be necessary to install a
special antenna to improve the picture.

• RADIO FREQUENCY INTERFERENCE:
The interference produces moving ripples or diagonal streaks, and in some
cases, causes loss of contrast in the picture.

NOTE:

The TV set can generate sound distortion in external devices such as a radio. Please separate radio equipment from the
TV set to a considerable distance.

USEFUL INFO

SYMPTOMS
No Picture, nosound

•

Sound OK, picture poor

•

Picture OK, sound poor

•

Picture blurred
Lines or streaks in picture
Poor reception on some channels
Picture rolls vertically

•

•
•

•

No color

•

Poor color

•

HITACHI Projection Television incorporates advanced power surge protection technology designed to protect against
component or circuit damage due to external or internal voltage power surges.
IF YOUR TELEVISION SHOULD APPEAR TO HAVE A LOSS OF POWER, PLEASE FOLLOW THIS PROCEDURE:
1.
2.
3.

Press the
If there is
If there is
Press the

power switch (ON/OFF switch) once.
still no power, wait 30 seconds and press the power switch again.
still no power, unplug the power cord from the wall. Wait 30 seconds and plug the power cord back in.
power switch again.

This protective technology should provide for years of lasting entertainment

from your HITACHI Projection Television.

USEFUL INFO
Features:
Superfine Picture Quality
1280 Line Horizontal Resolution
Remote (Controls many VCRs, DVD players, cable boxes, and satellite boxes.)
New Easy-to-Use (3-Language) On-Screen Menu
Full Set of Input Jacks, including S-VIDEO
COMPONENT VIDEO: Y'PJPR
Velocity Modulation
Five Aspect Modes
Closed Caption Decoder
2-Tuner Picture in Picture
Magic Focus (Auto Digital Convergence and Manual Adjustment)
Dual Antenna Inputs
Video Input Sensor
3 Dimensional Y/C Comb Filter
Full 1080i HDTV capable when used with a Set-Top Box.
Technology.
*Licensed by BBE Sound, Inc. under USP4638258, 5510752 and 5736897. BBE and BBE symbol are registered
trademarks of BBE Sound, Inc. Manufactured under license from BBE Sound, Inc.
SIWCO]_ Technology.
*SRS and the (0)
SRS Labs, Inc.

symbol are registered trademarks of SRS Labs, Inc. SRS technology

Inputs:
.............

AC 120V, 60Hz

Stand-by Power .................
0.96W
Power Consumption
- Refer to rear panel at the back of the T.V.
Antenna input impedance
.........
75 Ohm
Channel coverage
...............
181ch.
VHF-Band
.....................
2 - 13
UHF-Band
....................
14 - 69
CATV Mid Band ...............
A-5 ~ A-1
...........................
A-I
Band

Hyper Band
Ultra Band
Video

under license from

Dimensions:

Power Input

Super

is incorporated

.....................

431=300

53F300

Height (in.)
(ram)

43 5/8
1,108.0

81 5/8
1,311.6

Width (in.)
(mm)

39
989.2

46
1,168.4

Depth

20 8/8
523.9

25 1/4
641.8

143.5

239

in.
(mm)

Weight (Ibs.)

J-W

...............
...............

W+I - W+28
W+29 - W+84

................

1.0Vp-p,

75 Ohm

1.0Vp-p,
0.266Vp-p,

75 Ohm
75 Ohm

S-Video
Luminance
(Y) ..........
Chrominance
(C) .......
Component Video
Luminance (Y) ...............
Chrominance
Audio

1.0Vp-p, 75 Ohm

(PB/PR) .........

input Impedence

0.7Vp-p, 75 Ohm

..........

Average input level ................

47k Ohm
470mVrms

Outputs:
Video ......................
Audio (Fixed) .............

NOTE:
1.0Vp-p. 75 Ohm
470mVrms, Ik Ohm

Due to improvements, specifications in this operating guide are subject to change without notice.

USEFUL INFO

H ITAC H I

To locate an authorized
HITACHI service
in the continental
and Canada,

facility
U.S.A.

DIAL TOLL FREE
7 days a week, 24 hours a day

(1-800-448-2244)

Hitachi America, LTD.
Home Electronics Division
Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service,
a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico. Each facility will provide
you with convenient and expedient assistance. Our service hotline operator will direct you to the Hitachi Authorized Service Facility
nearest you. Just present proof of purchase and/or delivery receipts to the Hitachi Authorized Service Facility, and service will be
rendered in accordance with the terms of the limited warranty as stated on your warranty card or operating guide.

Should you have any questions regarding warranty, service, operation,
Hitachi America, LTD.
Home Electronics Division
1855 Dornoch Court
San Diego, CA 92154

or technical assistance, please contact:

USEFULINFO
Hitachi Canada, LTD.
Digital Media Division
Should you have any questions
contact:

regarding

warranty,

service,

operation,

or technical

assistance,

please

In Canada:
1-800-HITACHI
(1-800-448-2244)
Monday - Friday EST 9:00am - 7:00pm
Saturday EST 9:00am - 5:00pm
Look for your French Manual on the outside of the box.
ff the manual is missing, cell
1-800-H

ITAC H I

(1-800-448-2244)
for a copy.

Pour de plus amples renseignements
tionnement
ou pour de rassistance

sur Is service durant la p_riode
technique cemmuniquez
avec:

ceuverte

Au Canada:
1-800-HITACHI
(1-800-448-2244)

Lundi - Vendredi L'EST 9:00am - 7:00pm
Samedi L'EST 9:00am - 5:00pm
La version fran_.ais de votre manual se trouve
Si le manuel est manquant,
ceposez Is

a l'exterieur
1-800-H

de la bore.

ITAC H I

(1-800-448-2244)
pour obonir votre cepie.

HITACHI CANADA, LTD.
6740 Campobello
Road
Mississauga, ON L5N 2L8

par la garentie,

sur le fonc-

INDEX

/:t

Accessories, 4
Antennas (Conrecting), 5, 6
Aspect Ratio, 22
Audio (Sound Er_ancement)
SRS, 37
BBE, 37
Audio Settirgs, 36 - 38
Audio Source, 38
Auto Color, 35
Auto Noise Cancel, 38

Irput Setup, 53 - 54

Remote Control
Functions, 19 - 29
Programming Codes, 27 - 29
Installing Batteries, z_

B
Balance, 36
Bass, 36
Black Level Expansior,
Brightness, 33

C
Cl_anrel Manager, 39 - z_0
Cl_anrel Setup, 51
Auto C_anrel Scan, 52
Clock
Time, 50
Closed Captiors
Captiors, 56
Color System, 35
Color Temperature, 35
Color, 33
Contrast, 33
Convergerce (see Magic Focus)

L
Larguage
Menu Language, z_9
Locks
Charge Access Code, z_l
Charnel Lock, 41
Irput Lock, 41
Front Parel Lock, z_l
TV Time Lock, z_l
Movie Ratings, z_2
TV Ratings, z_3
TV Ratings
(Canadian - Erglisl_), z_4
TV Ratings
(Canadian - French), z_5
Loudress, 38

$
Scan Velocity Modulation, 35
Sharpness, 33
Sound Enhancement, 37
Speakers, 38
Connecting External Speakers, 5, 13

T
Time, 50
Tint, 33
Treble, 36

/14

Magic Focus
Auto Convergence, 7, z_7
Manual Convergence, z_8
Menu Preference

Vertical Position, 33
Video Settings, 32 - 35

Language, 49
Background, 50
Monitor Out, 9

N
Noise Reduction, 35

Dimmer, 35

Perfect Volume, 38
Picture Mode, 32
Picture-in-Picture (PIP), 24 - 26

Event Timer, 55

HITACHI

QF_55292

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 64
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Tue Apr 03 10:34:51 2007
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

Hitachi 43F300 User Manual PROJECTION TV Manuals And Guides L0305435

HITACHI Projection/Digital 42 and above TV Manual L0305435 HITACHI Projection/Digital 42 and above TV Owner's Manual, HITACHI Projection/Digital 42 and above TV installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation