Hitron TECHNOLOGIES CODA4782 DOCSIS 3.1 wifi Gateway User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3186268
Application ID	DG9xY0e3qihrp4MVbtnWvQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	100.43kB (1255326 bits)
Date Submitted	2016-11-04 00:00:00
Date Available	2016-11-04 00:00:00
Creation Date	2017-12-17 02:36:38
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-17 02:36:38
Document Title	Users Manual
Document Creator	Adobe Illustrator CS6 (Windows)

QUICK START GUIDE
HITRON
CODA-4582/ 4682/ 4782
Check the Box Contents
STEP
Read me
Look in the box and make sure you have the following:
first!
CODA-4582/ 4682/ 4782
Connect to the network
Set up your wireless network
Connect to a Cable Outlet
STEP
Use a coaxial cable (not included) to connect the device’ s CABLE
connector to a cable outlet.
Connect to an Ethernet-Equipped Device (Optional)
STEP
Use the Ethernet cable provided to connect one of the LAN ports
to an Ethernet-equipped device.
POWER CORD
ETHERNET CABLE
QUICK START GUIDE
The Hitron CODA-4582/ 4682/ 4782 is an application gateway that provides
wired and wireless high-speed Internet access as well as optional MoCA
(Multimedia over Coax Alliance) networking to the Ethernet-enabled
devices in your home for a fast and easy home entertainment network.
Connect to a Power Outlet
STEP
Use the power cord provided to connect the POWER port to a power
outlet.
User Configuration (Optional)
STEP
In a web browser, enter 192.168.0.1 in the address bar followed by
Username and Password, as below.
c usa dm in
pa ssw ord
Connect with Wireless Devices (Optional)
STEP
Connect your wireless devices with the correct SSID and Passphrase.
If you have not changed them, the default values are indicated on
the sticker on the back of the unit.
Connect your wireless devices with the WiFi
Protected Setup (WPS). Access the configuration
interface (see step 5), enter the Wireless page
to enable WPS and set Encrypt Mode to AES,
then press Save Changes.
Press this button to begin the WPS Push-Button
Configuration (PBC) procedure. Press the PBC
button on your wireless clients in the coverage
area within two minutes to enable them to j oin
the wireless network.
Setup Complete
STEP
Congrat ulat ions! You have successfully set up your CODA-4582/
4682/ 4782.
If you have any problems, see t he sect ion below for help in
ident ifying t he cause.
IP Addresses
If t he CODA-4582 is successfully connect ed t o t he net work (see LED Display)
but you cannot access t he Int ernet from a connect ed comput er, your
comput er’ s IP Address may be set up improperly. In your comput er’ s
net work set t ings, ensure t hat it is configured t o eit her receive an IP
address aut omat ically (recommended) or t hat it has a st at ic IP address in
t he 192.168.0.10~192.168.0.254 range. For more informat ion, consult your
operat ing syst em’ s Help document at ion.
LED Display
Green-St eady
Device is running wit h AC power.
Of f
Not powered.
Green-Blinking
is being t ransmit t ed or received.
Power
Green-Blinking The modem is searching f or t he downst ream
Wireless
(2.4GHz)
Green-St eady
The 2. 4GHz wireless net work is enabled, and no
dat a is being t ransmit t ed or received.
f requency.
Downsteam
Connec Green-St eady
t powerBlue-St eady
The 2. 4GHz wireless net work is enabled, and dat a
Of f
Downst ream f requency is locked. (1 channel only)
The 2. 4GHz wireless net work is not enabled.
Downst ream f requency is locked. (channel bonding)
Green-Blinking The 5GHz wireless net work is enabled, and dat a is
Cyan-St eady
DOCSIS 3. 1 OFDM
Of f
Not scanning
being t ransmit t ed or received.
Wireless
(5GHz)
Green-St eady
The 5GHz wireless net work is enabled, and no
Green-Blinking The modem is searching f or t he upst ream
dat a is being t ransmit t ed or received.
f requency.
Of f
Upsteam
Green-St eady
Upst ream f requency is locked. (1 channel only)
Blue-St eady
Upst ream f requency is locked. (channel bonding)
Cyan-St eady
DOCSIS 3. 1
Of f
Not scanning
The 5GHz wireless net work is not enabled.
Green-Blinking Gat eway is searching f or MoCA device.
Green-St eady
MoCA
(Optional)
MoCA device has been det ect ed, and t he
CODA-4582/ 4682/ 4782 has successf ully made a
Green-Blinking Regist rat ion is in progress wit h cable company’s
connect ion.
head-end.
Of f
Online
Green-St eady
Gat eway is operat ional f or dat a t ransmission.
Of f
Gat eway is of f line.
MoCA f unct ion is not enabled.
Green-Blinking USB device is plug-in USB port .
Green-Blinking Et hernet is act ivat ed.
Of f
Of f
Et hernet is disabled.
No USB device.
USB
Ethernet
Safety Warnings
WARNING
Risk of elect rical shock. Do not expose t he device t o wat er or moist ure.
The device is a high-performance communicat ions device designed for home and office environment s. Do not use t he device out doors. Keep t he device in an environment bet ween 0° C ~ 40° C (32° F ~104° F). To avoid overheat ing, do NOT place any
obj ect on t op of t he device. Do not rest rict t he flow of air around t he cable modem. The manufact urer assumes no liabilit ies for damage caused by any improper use of t he device.
DISCLAIMER
The manufact urer assumes no liabilit ies wit h respect t o t he cont ent s of t his document . The manufact urer also reserves t he right t o revise t his document or updat e t he cont ent t hereof wit hout any obligat ion t o not ify any person of such revisions or
amendment s. Specificat ions subj ect t o change wit hout not ice.
CAUTION
The cable dist ribut ion syst em should be grounded (eart hed) in a accordance wit h ANS/ NFPA 70, t he Nat ional Elect rical Code (NEC), in part icular Sect ion 820.93, Grounding of Out er Conduct ive Shield of a Coaxial Cable.
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been t est ed and found t o comply wit h t he limit s for a Class B digit al device, pursuant t o Part 15 of t he FCC Rules.
These limit s are designed t o provide reasonable prot ect ion against harmful int erference in a resident ial inst allat ion. This equipment generat es, uses and can radiat e radio frequency energy and, if not inst alled and used in accordance wit h t he inst ruct ions, may cause
harmful int erference t o radio communicat ions.
However, t here is no guarant ee t hat int erference will not occur in a part icular inst allat ion. If t his equipment does cause harmful int erference t o radio or t elevision recept ion, which can be det ermined by t urning t he equipment off and on, t he user is encouraged t o t ry
t o correct t he int erference by one of t he following measures:
●
●
●
●
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caut ion: Any changes or modificat ions not expressly approved by t he part y responsible for compliance could void t he user’ s aut horit y t o operat e t his equipment .
This device is going t o be operat ed in 5.15~5.25GHz frequency range, it is rest rict ed in indoor environment only.
This device complies wit h Part 15 of t he FCC Rules. Operat ion is subj ect t o t he following t wo condit ions: (1) This device may not cause harmful int erference, and (2) t his device must accept any int erference received, including int erference t hat may cause undesired
operat ion. For product available in t he USA/ Canada market , only channel 1~11 can be operat ed. Select ion of ot her channels is not possible.
This device and it 's ant ennas(s) must not be co-locat ed or operat ing in conj unct ion wit h any ot her ant enna or t ransmit t er except in accordance wit h FCC mult i-t ransmit t er product procedures.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies wit h FCC radiat ion exposure limit s set fort h for an uncont rolled environment . This equipment should be inst alled and operat ed wit h minimum dist ance 21cm bet ween t he radiat or & your body.
IC Statement:
This device complies wit h Indust ry Canada license-exempt RSS st andard(s). Operat ion is subj ect t o t he following t wo condit ions: (1) t his device may not cause int erference, and (2) t his device must accept any int erference, including int erference t hat may cause
undesired operat ion of t he device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
For product available in t he USA/ Canada market , only channel 1~11 can be operat ed. Select ion of ot her channels is not possible.
Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être exploités. Sélection d'autres canaux n'est pas possible.
This device and it 's ant ennas(s) must not be co-locat ed or operat ing in conj unct ion wit h any ot her ant enna or t ransmit t er except in accordance wit h IC mult i-t ransmit t er product procedures.
Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une autre antenne ou transmetteur.
The device for t he band 5150-5250 MHz is only for indoor usage t o reduce pot ent ial for harmful int erference t o co-channel mobile sat ellit e syst ems.
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
IC Radiation Exposure Statement:
This equipment complies wit h IC RSS-102 radiat ion exposure limit s set fort h for an uncont rolled environment . This equipment should be inst alled and operat ed wit h minimum dist ance 21cm bet ween t he radiat or & your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 21 cm de distance entre la source de rayonnement et votre corps.
COPYRIGHT © 2016 HITRON TECHNOLOGIES, INC.
0440010241N0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:58327122-a802-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:23 20:30:41Z
Create Date                     : 2017:07:23 20:30:41Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:58327122-a802-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools