Hohem Technology HGS 3-Axis Stabilizing Gimbal for Action Camera User Manual iSteady Pro User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3928150
Application ID	Elm8POxd94WD+yxxSEXPAA==
Document Description	iSteady-Pro-User-Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	48.94kB (611727 bits)
Date Submitted	2018-07-18 00:00:00
Date Available	2018-07-18 00:00:00
Creation Date	2018-05-31 14:56:06
Producing Software	Microsoft® Word 2016
Document Lastmod	2018-07-04 15:30:22
Document Title	iSteady-Pro-User-Manual
Document Creator	Microsoft® Word 2016
Document Author:	Administrator

3-Axis Handheld Stabilizing Gimbal For Action Camera
Product Overview
Camera Charging Port
Tilting 320°
Rolling 320°
Panning 640°
10
11
Power indicatorLight
Charging Port
12
1/4 Inch Extension
Screw Hole
1.
2.
3.
4.
5.
6.
Thumb Screw
Tilt Motor
Pan Motor
1/4 Inch Extension Screw Hole
Bluetooth Light
Hot Key
7.
8.
9.
10.
11.
12.
Roll Motor
Mode Light
Joystick
Mode Button
Turn ON/OFF
Handle (Battery inside)
⚫
Accessories List
Micro USB Cable*1
Tripod*1
Carry Case*1
User Manual (Includes warranty card) *1
1、 Installation Instruction
Install the ‘Hohem Gimset’ App
Search for ‘Hohem Gimset’ in the App Store or Google Play,
and install the app on your mobile phone.
*‘Hohem Gimset’ supports iOS 9.0 and Android 8.0 or above
2.Stabilizer Charging& Action camera Charging
Fully charge the stabilizer before using it for the first time.
Using the standard USB cable connecting to the stabilizer charging port (or other power
sources)
a. USB Port: Power bank output(Charging the
smartphone,action camera etc.)
b. Micro USB Port: Charging the gimbal, Upgrade
firmware& Calibration
a. 4 Led lights indicators
4 Led lights on means power is 100%
3 Led lights on means power is 75%
2 Led lights on means power is 50%
b. Indicator Light Fast Flashing: Charging status
c. Indicator Light Solid: Fully charged status
*the charging time is about 4 hours while directly charging from the wall charger
3.Install Action Camera
Please remove the action camera protective case and install the camera before turn on the gimbal.
（2）GoPro Hero 4/3，YI CAM,SJ CAM
(1) GoPro Hero 6/5
or other action camera of similar size
The lens next to the tilt motor
The lens is opposite to the tilt motor
Put the tilt motor to the RIGHT side, place
Put the tilt motor to the LEFT side, place
GoPro 6/5 closely to the back clip as picture
GoPro 6/5 closely to the back clip as
and tighten the knob to secure its position.
picture and tighten the knob to secure its
Double tighten by 2 long screws against
position. Double tighten by 2 long screws
violent movement.
against violent movement.
4、Operation Instruction
Panning right/ left
Bluetooth Light:
Solid on: Bluetooth connected
Quickly flashes twice: Power on/off
Tilting up/ down
Mode Button
Power On/Off (Long press for 3 seconds)
Hot Key (Setting in the APP)
Up: Reset
Down: Quick lock
MMode Button Operation
Work Modes
Single Click
Pan Following
Double Click
Pan& Tilt Following
Mode Light
Flash for once
(Quick flash)
Flash for twice
Instruction
Default mode, tilt & roll axis both locked,
camera can move to left or right smoothly.
Roll axis locked, camera can move to
left/right, and tilt up/down.
The camera stays in its current orientation.
Triple Click
All Locked
Flash for triple
Quartic Click
All Following
Flash for once
(Slow flash)
Tilt axis, roll axis and pan axis all follow
Long Press For
6 Seconds
Calibration
Solid on
Tilt or roll angle not leveled with horizontal
surface, or pan angle drift in lock mode.
5、APP Instruction
(1) Enable the Bluetooth on the smartphone
（2）Open the App, choose the model then confirm into Bluetooth connection.
（Bluetooth will be connected in the App automatically, no need to set in the smartphone setting）
More functions in the App
(Please confirm the Bluetooth is connected and the Bluetooth light is solid on)
1.
Timelapse
2.
Motion timelapse
3.
Remote control：
A. Joystick: control the shooting direction of gimbal
4.
B.
One key to switch the work modes
C.
One key to return and reverse
Personalized parameter setting：
A． Follow speed
B． Joystick speed
C． Following dead zone range
D． Motor torsion
5.
Calibration and upgrade firmware
6. Parameter
76.6
82.1
244.04
176.05
Dimension(mm)
Material
Composite material
Weight
370g
Tilt Rotate Range
320°
Roll Rotate Range
320°
Pan Rotate Range
640°
Angle Vibration Range
±0.01°
Working Voltage
3.2V~4.0V
Battery& Working time
Li-ion battery, 4000mAh, 10 hours
Compatible Action
GoPro Hero 6/5/4/3,RX0 (with optional adapter), YICAM, SJCAM, or other
action camera of similar size and weight
Camera Size
7、Calibration
⚫ If the gimbal has the following situations, please calibrate it:
①
②
③
⚫
The pitch angle is not leveled with the horizontal surface.
The roll angle is not parallel to the horizontal surface.
Under the lock mode, the panning angle drifting.
Calibration Operation Instruction ：
Method 1：Off-line Calibration
(1) Power on the gimbal (around 3 seconds), long press the mode button over 6 seconds
till the mode light is solid.
(2) Lay the gimbal on a static flat surface; make sure it has no shaking. Calibration is finish
when the mode light is continuously flashing for 3 times.
(3) Power off the gimbal and restart it, if the calibration is unsuccessful, you can repeat
step (1)(2) to reinitialize.
Method 2：6-Side Calibration Via App
Please ensure the stabilizer is connected with App via Bluetooth, then enter “Calibration”
and follow the tips to calibrate in the App.
8、Firmware Upgrade
Please ensure the stabilizer is connected with App via Bluetooth, then enter the “Firmware
Upgrade” and follow the tips to upgrade the latest firmware
9、DISCLAIMER
Please install and use the product according to the manual!
Please reconfirm the gimbal and the action camera are well installed before power on!
Keep the stabilizer away from fire and heat source!
Prohibit any user for any illegal purpose. Users will be responsible for all behavior of
purchasing and using the products.
For any unknown sources or usage, we will not provide any service.
If there is any question, please contact the technician of Hohem Tech, we won’t be
responsible for any wrong operations by users.
Hohem Tech reserves the right for final explanation.
Federal Communication Commission (FCC) Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement, The device can be used in portable
exposure condition without restriction Federal Communication Commission (FCC) Radiation Exposure
Statement Power is so low that no RF exposure calculation is needed.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications or changes to this equipment. Such modifications or changes could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 6
Language                        : zh-CN
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Producer                        : Microsoft® Word 2016
Format                          : application/pdf
Creator                         : Administrator
Creator Tool                    : Microsoft® Word 2016
Create Date                     : 2018:05:31 14:56:06+08:00
Modify Date                     : 2018:07:04 15:30:22+08:00
Metadata Date                   : 2018:07:04 15:30:22+08:00
Document ID                     : uuid:A81156E5-8970-4C9C-A11B-071B3E89C2C4
Instance ID                     : uuid:873feed4-c916-49e5-be58-23fa4be79713
Author                          : Administrator

EXIF Metadata provided by EXIF.tools