Home Strong Video Technology HS8 Media Player User Manual

Home Strong Video Technology Co.,Ltd Media Player Users Manual

User Manual

1
User’s Manual
2
Catalog
1. System Connection ................................................................................................... 1
2. Quick Installation Guide ........................................................................................... 2
3. Setting Wi-Fi or Ethernet..................................................................................................................4
4. System Update .......................................................................................................... 7
5. Abnormal phenomenon and ruled out ...................................................................... 8
1.System Connection
Pleaseconnectwithyourpower,TVset,andotherrelateddevicesaccordingto
thepictureshowsbelow,ifyouneedtoconnectwithmoredevices,pleasecontact
withyourlocaloperator.
（
1‐1
）
（
1‐1
）
2.Quick Installation Guide
Step1
：
Checksystemconnection
PleasemakesureTV,MediaPlayerconnectedcorrectly,youcantake a
referenceonsystemconnectionpicture. 
Step2
：
SwitchTVintoVideoStatus
Makesurealltheportinrearpanelconnectproperly,turnonthe TV, and
switchtheTVintoVideoStatus.
Step3
：
Plugthepowerlineof
STB
,turnonthebox.
3
Afterpowerlineconnected,pressPOWERbuttontopowerontheMediaPlayer,
theindicatorLEDlightinfrontofpanelwillon.
Step4
：
StandbyandStandbyRecovery
When machines in turned on ,press standby button ,machine will in standby
mode,andStandbyindicatorlightwillon,theboxwillinlowpowerconsumption
status .Press standby button again will end standby mode and recover to normal
workingmode.
（
2‐1
）

（
2‐1
）
Step5
：
Poweroff
Afterpoweredoff,pleasepullupthepowerline. 
Note: All features can be achieved through your remote
control buttons, also you can achieve parts of functions
through the buttons in front panel of the box, if you have
difficulty on using this unit, please refer to the instructions
in the relevant chapters. If you still can not resolve the
problems encountered, please contact the operator to find
a solution.
3.Setting Wi-Fi or Ethernet：
1.WIFI SETTING:
Open boxs setting Select WIFI
see as figure (3-1
）
,
Click "OK" on wifi will Auto Search wifi
signal see as figure (3-2)
。
4
(3-1) (3-2)
Selects strong signal wifi and connection see as figure 3-3,
(3-3)
This time you back home interface you can see tv Upper right corner show wifi
logo ,this time you can user Browser .
2.Ethernet:
Boxs To complete full installation you can open setting
Choose
Ethernet you can in here get boxs ip
Address ,
see as figure (3-4),
This time you back home interface you can see tv Upper right
corner show internet logo ,this time you can user Browser
。
(3-4)
4.System Update
5
A:Local upgrade

1. Insert the U-disk that store upgrading files.
2. Choose Setting -> upgrading into the system upgrading interface, see as
figure 4-1.
Figure4‐1
3. Click the right upgrading among all listed upgrade packages, then a
confirmation dialogue pops up.
4. Click "OK" to upgrade system will reboot then into the uploading
interface .
5. The machine starts to clear FLASH and showing completely loading the
upgrade files.
6. System will automatically reboot and the new system start to running after
the whole upgrading completes.
Note: Do not power off when in process of upgrading.
B:Automatic updates
When you on boxs To connect to the Internet will show“A new system software updates，
whether to update？” you can choose “Update now”.“Update later”，if you choose “Update
now”will show “Downloading software updates %”，The speed of downloading software
according to the speed of your Internet to decide.
interface pops up as shown in
figure 4-2 below.
Figure4‐2
Note: Do not power off when in process of upgrading.
6
7.Abnormal phenomenon and ruled out
Fault Phenomenon Possible reason Solution
After start, without
any display
The power cord didn't connect
or socket without electricity
Connected power plug, ensure normal
voltage electrical outlet
No Voice and
Images Play box in standby mode Please press the POWER button of the RCU
switch to the operation condition
TV with Voice
without Images Video line goes off Please re-connect the video cables
TV images without
Voice
Audio wire has no connection Re-connect the Audio lines
Play Box in quiet state Please press mute button to restore volume
Audio setting is abnormal
Please enter the audio and video Settings
menu, select the appropriate sound channel
and language
Volume , down to minimum Up the volume
Consistent Voice
with content Inconsistent Track Please setting in the audio and video
Settings menu, select sound channel
Images pause Or
Mosaic
phenomenon
The network speed not enough
or unstable Contact to network operator
Controller failure
RCU not aimed the receiving
head of the front penal
Please aim at the front's ' SENSOR', then try
again
Shortage power of Remote
control batteries Please change the batteries
Remote control is possibly
damaged
Please send it to the local maintenance
station for checking
7

Navigation menu