Home Strong Video Technology HS8 Media Player User Manual
Home Strong Video Technology Co.,Ltd Media Player Users Manual
User Manual
User’s Manual Catalog 1. System Connection ................................................................................................... 1 2. Quick Installation Guide ........................................................................................... 2 3. Setting Wi-Fi or Ethernet..................................................................................................................4 4. System Update .......................................................................................................... 7 5. Abnormal phenomenon and ruled out ...................................................................... 8 1.System Connection Please connect with your power, TV set, and other related devices according to the picture shows below, if you need to connect with more devices, please contact with your local operator.(1‐1) (1‐1) 2.Quick Installation Guide Step 1:Check system connection Please make sure TV, Media Player connected correctly, you can take a reference on system connection picture. Step 2 :Switch TV into Video Status Make sure all the port in rear panel connect properly, turn on the TV, and switch the TV into Video Status. Step 3:Plug the power line of STB, turn on the box. After power line connected, press POWER button to power on the Media Player, the indicator LED light in front of panel will on. Step 4:Standby and Standby Recovery When machines in turned on ,press standby button ,machine will in standby mode ,and Standby indicator light will on, the box will in low power consumption status .Press standby button again will end standby mode and recover to normal working mode .(2‐1) (2‐1) Step 5:Power off After powered off, please pull up the power line. Note: All features can be achieved through your remote control buttons, also you can achieve parts of functions through the buttons in front panel of the box, if you have difficulty on using this unit, please refer to the instructions in the relevant chapters. If you still can not resolve the problems encountered, please contact the operator to find a solution. 3.Setting Wi-Fi or Ethernet: 1.WIFI SETTING: Open boxs setting Select WIFI see as figure (3-1),Click "OK" on wifi will Auto Search wifi signal see as figure (3-2)。 (3-1) (3-2) Selects strong signal wifi and connection see as figure 3-3, (3-3) This time you back home interface you can see tv Upper right corner show wifi logo ,this time you can user Browser . 2.Ethernet: Boxs To complete full installation you can open setting Choose Ethernet you can in here get boxs ip Address ,see as figure (3-4),This time you back home interface you can see tv Upper right corner show internet logo ,this time you can user Browser 。 (3-4) 4.System Update A:Local upgrade 1. Insert the U-disk that store upgrading files. 2. Choose Setting -> upgrading into the system upgrading interface, see as figure 4-1. Figure 4‐1 3. Click the right upgrading among all listed upgrade packages, then a confirmation dialogue pops up. 4. Click "OK" to upgrade system will reboot then into the uploading interface . 5. The machine starts to clear FLASH and showing completely loading the upgrade files. 6. System will automatically reboot and the new system start to running after the whole upgrading completes. Note: Do not power off when in process of upgrading. B:Automatic updates When you on boxs To connect to the Internet will show“A new system software updates, whether to update?” you can choose “Update now”.“Update later”,if you choose “Update now”will show “Downloading software updates %”,The speed of downloading software according to the speed of your Internet to decide.interface pops up as shown in figure 4-2 below. Figure 4‐2 Note: Do not power off when in process of upgrading. 7.Abnormal phenomenon and ruled out Fault Phenomenon Possible reason After start, without any display The power cord didn't connect or socket without electricity Connected power plug, voltage electrical outlet Play box in standby mode Please press the POWER button of the RCU switch to the operation condition No Voice and Images TV with Voice without Images Solution Video line goes off ensure normal Please re-connect the video cables Audio wire has no connection Re-connect the Audio lines Play Box in quiet state Please press mute button to restore volume Audio setting is abnormal Please enter the audio and video Settings menu, select the appropriate sound channel and language Volume , down to minimum Up the volume Consistent Voice with content Inconsistent Track Please setting in the audio and video Settings menu, select sound channel Images pause Or Mosaic phenomenon The network speed not enough or unstable Contact to network operator RCU not aimed the receiving head of the front penal Please aim at the front's ' SENSOR', then try again Shortage power of Remote control batteries Please change the batteries Remote control is possibly damaged Please send it to the local maintenance station for checking TV images without Voice Controller failure 7
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : lenovo Create Date : 2016:08:26 01:02:43+08:00 Modify Date : 2016:08:26 01:03:32+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : lenovo Title : <4D6963726F736F667420576F7264202D20CBB5C3F7CAE92DB6E0C3BDCCE5> Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2016:08:26 01:03:32+08:00 Producer : Acrobat Distiller 11.0 (Windows) Document ID : uuid:19585738-9dfd-4c96-8b63-53874dfc6f06 Instance ID : uuid:400739d3-5372-4361-afe7-f7a949f75031 Page Count : 7EXIF Metadata provided by EXIF.tools