Homewerks Worldwide 7130-04-BT ventilating bath fan with bluetooth speaker User Manual

Homewerks Worldwide, LLC ventilating bath fan with bluetooth speaker

User Manual

VENTILATING BATH FAN WITH BLUETOOTH® SPEAKERMODEL #7130-04-BT Español p. 13Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-319-3757, 8 a.m. - 5 p.m., CST, Monday - Friday.Jan. 11, 2016www.homewerksww.comHome NetWerksSIMPLE SOLUTIONS FOR A SMARTER HOMEThe BLUETOOTH® word mark and logos are registered trademarks owned by BLUETOOTH SIG, Inc. and any use of the said mark by Homewerks Worldwide is under license. Other trademark and trade names are those of their respective owners.READ AND SAVE THESE INSTRUCTIONS
2TABLE OF CONTENTSPRODUCT SPECIFICATIONSSPECIFICATIONS SPECIFICATIONSAirow: 70 CFM Power consumption: 10.05 W120 V, 60 Hz Exhaust fan speed: 1150 RPMDuct diameter: 4 in. Weight: 4.608 lbs.Sound output: 1.5 SonesProduct Specications ........................................................................................................................2Package Contents ..............................................................................................................................3Safety Information ..............................................................................................................................4Preparation .........................................................................................................................................5New Construction Assembly Instructions ...........................................................................................6Existing Construction Assembly Instructions ......................................................................................8Pairing BLUETOOTH® Device to Speaker .......................................................................................10Care and Maintenance .....................................................................................................................10Troubleshooting ................................................................................................................................ 12 Warranty ...........................................................................................................................................12www.homewerksww.comFCC COMPLIANCEThis equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications or changes to this equipment. Such modications or changes could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.
3PACKAGE CONTENTSPART DESCRIPTION QUANTITYA Fan body 1B Grille with speaker 1ABHARDWARE CONTENTS (shown actual size)AALong Wood ScrewQty. 2www.homewerksww.com
4SAFETY INFORMATIONPlease read and understand this entire manual before attempting to assemble, operate or install the product.1. Always disconnect the power supply prior to servicing the fan, motor or junction box.2. Installation work must be carried out by a qualied person(s) in accordance to all local and safety codes including the rules for re-rated construction.3. Follow all local building, safety and electrical codes as well as NEC (National Electrical Code) and OSHA (Occupational Safety and Health Act).4. Electric service supply must be 120 volts, 60 hertz.5. This unit must be properly grounded.6. Do not bend or kink the power wires.7. Exercise care to not damage existing wiring when cutting or drilling into walls or ceilings.8. Sufcient air supply is required for proper combustion and the exhaustion of gases through the chimney (ue) of fuel burning equipment to prevent back-drafting. See the standards of NFPA (National Fire Protection Association) and ASHRAE (American Society for Heating Refrigeration and Air Conditioning Engineers) and the local building code authorities.9. Do not use this fan with any solid state control device, such as a remote control, dimmer switch, or certain timers. Mechanical timers are not solid state devices.10. This ventilation fan is approved for use over a bathtub or shower when installed in a GFCI protected circuit. Do not use fans over a bathtub or shower that are not approved for that application and marked accordingly.11. Do not install in a cooking area.12. Do not use to exhaust hazardous or explosive vapors.13. Fans should always be vented to the exterior and in compliance with local codes.14. Do not install in a ceiling with insulation greater than R42.15. Duct work should be installed in a straight line with minimal bends.16. Duct work size must be the same size as the discharge and should not be reduced. Reducing the duct size may increase fan noise.17. Prior to service or cleaning this unit, shut off power supply at the panel and lock to prevent the power from being turned on. If the panel cannot be locked, clearly mark the panel with a warning tag to prevent the power from being turned on.18. Use this unit in the manner intended by the manufacturer. If you have any questions, please call customer service.19. The fan is intended to be mounted at least 7.6 ft. above the oor.www.homewerksww.com
5PREPARATIONBefore beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Tools Required for Assembly (not included): Hammer, Drill Bits, Flathead Screwdriver, Wire Nuts, Nails, Duct Tape, Phillips Screwdriver, Utility KnifeHelpful Tools (not included): Electric Drill, Wood ScrewsWARNING: Turn off electricity at breaker box before beginning installation.Carefully remove unit from carton.Check area above installation location to be sure that wiring can run to the planned location and that duct work can be run and the area is sufcient for proper ventilation.Inspect duct work and wiring before proceeding with installation.Before installation, provide inspection and future maintenance access at a location that will not interfere with installation work.You may need the help of a second person to install this fan; one person on the attic side and one on the room side.Note: Installations may vary depending on how the previous bath fan was installed. Supplies necessary for the installation of your bath fan are not all included; however, most are available at your local home improvement or hardware store.DIMENSION REQUIREMENTSCeiling Opening (L)Ceiling Opening (W)Ceiling Opening (H)7-1/2 in. 7-5/32 in. 7 in.WIRING DIAGRAMwww.homewerksww.com
6NEW CONSTRUCTION ASSEMBLY INSTRUCTIONSNEW CONSTRUCTION – ATTACHING TO THE JOIST BEFORE INSTALLATIONTurn off power source. Review all safety precautions.1. Place the fan body (A) next to a ceiling joist or wall stud. The fan housing should be level and perpendicular to the joist or stud. Allow for thickness of ceiling board used in your applica-tion. DO NOT ush mount to joist. Bottom of fan (A) should be ush with ceiling board.2. Mount fan body to the joist or stud using long wood screws (AA) where indicated by arrows outside fan body (A). Hardware UsedAA Long wood screws x 23. Pull wire through hole and into junction box (not included). Using quick connector, secure 120-volt AC house wiring from wall switch to fan as shown in wiring diagram on page 5. Note: 12 AWG is the minimum conductor to be used for branch-circuit wiring.CAUTION: If your electrical wires do not match the colors listed, you must determine what each house wire represents before connecting. You may need to consult an electrical contractor to determine safely.1 2123HousewiresQuick connectorsProductwireswww.homewerksww.com
7NEW CONSTRUCTION ASSEMBLY INSTRUCTIONS 44. Install a circular 4 in. duct (not included) and secure it with duct tape or clamps (neither included).Finish ceiling work. Ceiling hole should be aligned with edge of fan body (A).www.homewerksww.com21. Join the connectors for the BLUETOOTH® speaker and power adapter.2. Attach grille by pinching mounting springs and insert into narrow rectangular slots in the fan housing. Turn on power source. BLUETOOTH® SPEAKER FAN GRILLE INSTALLATIONHousing must be installed ush with ceiling board or the grille mounting spring will not be long enough to insert into the slots inside the fan housing.11. Turn ON bath fan.2. To play your personal music les, you need a wireless BLUETOOTH® device.3. Set your device to a midrange volume before connecting to the speaker.4. Follow the instructions that came with your BLUETOOTH® device to make it discoverable or to set it to search for other BLUETOOTH® accessories. This may involve entering a passkey or PIN (Personal Identication Number).5. From the Home screen, choose Settings > BLUETOOTH®, the device searches for HomeWerks® speaker.Note: While your device can maintain multiple pairing records, it can only connect to one accessory at a time. This prevents your device from sending your data to the wrong BLUETOOTH® accessory.6. Choose the HomeWerks® speaker, and then enter a passkey or PIN (0000) if prompted.7. When pairing is complete, you can use the BLUETOOTH® speaker to play audio with your device.8. Optimal volume setting for the BLUETOOTH® speaker is 70% or lower. Settings higher than 70% may cause sound distortion.PAIRING YOUR BLUETOOTH® DEVICE TO THE SPEAKER
8Installing the fan body in an existing building REQUIRES AN ACCESSIBLE AREA (attic or crawl space) above the planned installation location and existing duct and wiring. BEFORE INSTALLATIONTurn off power source. Review all safety precautions.1. Remove existing fan.2. Measure the opening to ensure it is large enough to accommodate the new fan body (A) (7-1/2 in. x 7-5/32 in.).3. If this fan is not replacing an old fan, be sure to cut a 7-1/2 in. x 7-5/32 in. opening for the fan body (A).4. Place the fan body (A) next to a ceiling joist or wall stud. The fan housing should be level and perpendicular to the joist or stud. Allow for thickness of ceiling board used in your applica-tion. DO NOT ush mount to joist. Bottom of fan (A) should be ush with ceiling board.1239.4"9.4"7-5/32 in.7-1/2 in.EXISTING CONSTRUCTION ASSEMBLY INSTRUCTIONS1 24www.homewerksww.com
9EXISTING CONSTRUCTION ASSEMBLY INSTRUCTIONS5. Mount fan body to the joist or stud using long wood screws (AA) where indicated by arrows outside fan body (A). Hardware UsedAA Long wood screws x 26. Pull wire through hole (5.1) and into junction box (not included). Using quick connector, secure 120-volt AC house wiring from wall switch to fan as shown in wiring diagram on page 5. Note: 12 AWG is the minimum conductor to be used for branch-circuit wiring.CAUTION: If your electrical wires do not match the colors listed, you must determine what each house wire represents before connecting. You may need to consult an electrical contractor to determine safely.7. Install a circular 4 in. duct (not included) and secure it with duct tape or clamps (neither included).Finish ceiling work. Ceiling hole should be aligned with edge of fan body.56HousewiresQuick connectorsProductwires 7www.homewerksww.com1. Join the connectors for the BLUETOOTH® speaker and power adapter.BLUETOOTH® SPEAKER FAN GRILLE INSTALLATIONHousing must be installed ush with ceiling board or the grille mounting spring will not be long enough to insert into the slots inside the fan housing.1
10CARE AND MAINTENANCEwww.homewerksww.com2. Attach grille by pinching mounting springs and insert into narrow rectangular slots in the fan housing. Turn on power source. BLUETOOTH® SPEAKER FAN GRILLE INSTALLATION1. Turn ON bath fan.2. To play your personal music les, you need a wireless BLUETOOTH® device.3. Set your device to a midrange volume before connecting to the speaker.4. Follow the instructions that came with your BLUETOOTH® device to make it discoverable or to set it to search for other BLUETOOTH® accessories. This may involve entering a passkey or PIN (Personal Identication Number).5. From the Home screen, choose Settings > BLUETOOTH®, the device searches for HomeWerks® speaker.Note: While your device can maintain multiple pairing records, it can only connect to one accessory at a time. This prevents your device from sending your data to the wrong BLUETOOTH® accessory.6. Choose the HomeWerks® speaker, and then enter a passkey or PIN (0000) if prompted.7. When pairing is complete, you can use the BLUETOOTH® speaker to play audio with your device.8. Optimal volume setting for the BLUETOOTH® speaker is 70% or lower. Settings higher than 70% may cause sound distortion.PAIRING YOUR BLUETOOTH® DEVICE TO THE SPEAKER2Turn off power source. Review all safety precautions.See safety information before proceeding. Routine maintenance should be done at least once a year.• Never use solvents, thinner or harsh chemicals for cleaning the fan.• Do not allow water to enter the motor.• Do not immerse metal parts in water.• Do not immerse resin parts in water over 140 degrees Fahrenheit.• Do not immerse BLUETOOTH® speaker in water
11CARE AND MAINTENANCEwww.homewerksww.com1. Remove grille by squeezing spring and pull down. Wipe grille with a damp cloth.2. Remove dust and dirt from the fan housing with a vacuum cleaner.3. Dampen cloth with dust detergent, wipe the fan housing and wipe dry with a cloth.4. Replace the BLUETOOTH® speaker and grille. Turn on power source.1234
12TROUBLESHOOTINGPROBLEM POSSIBLE CAUSE CORRECTIVE ACTIONThe fan seems louder than it shouldCFM too great Be sure the CFM rating on the fan matches the size of your room.Damper not working properly or damaged Check damper to ensure it is opening and closing properly. If the damper has become damaged, please call Customer Service.Bend in duct too close to fan discharge Be sure you do not have any sharp bends in duct closer than 18 in. to the fan discharge.Fan discharge reduced to t smaller duct Use recommended size ducting to reduce fan noise.Fan body not securely attached Be sure the fan is securely attached to your ceiling joists.The fan is not clearing the roomInsufcient intake airow within roomBe sure a door or window is slightly ajar or opened to allow airow. The fan is not able to draw air out of the room without enough airow to draw from.Insufcient CFMBe sure the CFM rating on the fan matches the requirements for your room size.NOTE: Using a tissue is not an accurate method for determining if the fan is operating properly. If the fan clears steam from the room within approximately 15 minutes of completing your shower, then the fan is operating properly.FAN – LIMITED 3-YEAR WARRANTYBLUETOOTH® SPEAKER – LIMITED 1-YEAR WARRANTYIf the fan fails due to a defect in materials or workmanship at any time during the rst THREE years of ownership, the manufacturer will replace it free of charge, postage-paid at their option. This warranty does not cover products that have been abused, altered, damaged, misused, cut or worn. This warranty does not cover use in commercial applications. Use only manufacturer-supplied genuine warranty repair replacement parts to repair this fan. Use of non-genuine repair parts will void your warranty. The manufacturer DISCLAIMS all other implied or express warranties including all warranties of merchantability and/or tness for a particular purpose. As some states do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply. This warranty gives you specic legal rights, and you may have other rights that vary from state to state.This warranty is limited to the replacement of defective parts only. Labor charges and/or damage incurred during installation, repair, replacement as well as incidental and consequential damages connected with the above are excluded. Any damage to this product as a result of neglect, misuse, accident, improper installation or use other than the purpose SHALL VOID THIS WARRANTY.Shipping costs for return product as part of a claim on the warranty must be paid for by the customer.Inquiries regarding warranty claims can be directed to 1-877-319-3757, 8 a.m. - 5 p.m., CST, Monday - Friday.If the BLUETOOTH® speaker fails due to a defect in materials or workmanship at any time during the rst year of ownership, the manufacturer will replace it free of charge, postage-paid at their option. This warranty does not cover products that have been abused, altered, damaged, misused, cut or worn. This warranty does not cover use in commercial applications. Use only manufacturer-supplied genuine warranty repair replacement parts to repair this fan. Use of non-genuine repair parts will void your warranty. The manufacturer DISCLAIMS all other implied or express warranties including all warranties of merchantability and/or tness for a particular purpose. As some states do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply. This warranty gives you specic legal rights, and you may have other rights that vary from state to state.This warranty is limited to the replacement of defective parts only. Labor charges and/or damage incurred during installation, repair, replacement as well as incidental and consequential damages connected with the above are excluded. Any damage to this product as a result of neglect, misuse, accident, improper installation or use other than the purpose SHALL VOID THIS WARRANTY.Shipping costs for return product as part of a claim on the warranty must be paid for by the customer.Inquiries regarding warranty claims can be directed to 1-877-319-3757, 8 a.m. - 5 p.m., CST, Monday - Friday.www.homewerksww.com

Navigation menu