Hon Hai Precision Industry WFU032 WLAN 802.11b/g/n 2T2R Module User Manual

Hon Hai Precision Industry Co., Ltd. WLAN 802.11b/g/n 2T2R Module Users Manual

Users Manual

WFU032 IEEE 802.11 b/g/n 2x2 Module Product Specification 2.5 Approved: Approved: Prepared by: ________________________ _________________________ _________________________ Zeke Wu Anson Yang Hans Huang Manager Supervisor Engineer
WFU032 PRODUCT SPECIFICATION FOXCONN CONFIDENTIAL 1 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved Revision History Date Number Approver Comments June 16, 2016 1.0 Hans Huang Initial Draft July 18, 2016 2.0 Hans Huang (1) Update Tx Power Consumption (2) Update Tx Power (3) Update Label Specification (4) Update EEPROM information (5) Update Module Photo Nov 10,2016 2.1 Hans Huang (1) Add connector drawing (2) Add power on sequence (3) Add certification Nov 14,2016 2.2 Hans Huang Update Power Consumption Mar 08,2017 2.3 Cathy Kuo Added Waring Statement Mar 10,2017 2.4 Cathy Kuo Updated TX Power table Mar 27,2017 2.5 Cathy Kuo Updated TX Power table RESTRICTED AND CONFIDENTIAL INFORMATION STATEMENT All information contained in this document is the exclusive property of Foxconn Technology Inc. and its development partners. Any reproduction or disclosure of all or part of this document without the expressed written consent of Foxconn Technology Inc. is strictly prohibited.
WFU032 PRODUCT SPECIFICATION FOXCONN CONFIDENTIAL 2 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved TABLE OF CONTENTS Revision History .................................................................................................. 1 Chapter 1. Module Overview ............................................................................. 4 1-1 Key Characteristic ......................................................................................................................... 4 1-2 Certification ................................................................................................................................... 4 1-3 USB Pin Definition ......................................................................................................................... 5 Chapter 2. Electrical and RF Specificaiton .......................................................... 7 2-1 Recommended Operation Rating ......................................................................................... 7 2-2 Power On Sequence .............................................................................................................. 7 2-3 Power Consumption.............................................................................................................. 8 2-4 WiFi RF Specification – TX ..................................................................................................... 8 2-5 WiFi RF Specification – RX ..................................................................................................... 9 Chapter 3. MECHANICAL SPECIFICATION ......................................................... 10 3-1 Module Assembly Dimension ............................................................................................. 10 3-2 Label Specification .............................................................................................................. 11 Chapter 4. Additional Information ................................................................... 12 4-1 EEPROM Information .......................................................................................................... 12 4-2 Module Photo ............................................................................................................................. 12 4-3 Environment Specifications ........................................................................................................ 12
WFU032 PRODUCT SPECIFICATION FOXCONN CONFIDENTIAL 3 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved Figures: Figure 1 Connector Drawing .......................................................................................................................................... 6 Figure 2 Power on sequence ......................................................................................................................................... 7 Figure 3 Mechanical Drawing ...................................................................................................................................... 10 Figure 4 Label Drawing ................................................................................................................................................ 11 Figure 5 Top Side Photo ............................................................................................................................................... 12 Figure 6 Bottom Side Photo ......................................................................................................................................... 12 Tables Table 1 Pin Definitions ................................................................................................................................................... 5 Table 2 Operation Rating ............................................................................................................................................... 7 Table 3 Power Consumption.......................................................................................................................................... 8 Table 4 IEEE 802.11 b/g/n TX Output Power (WLAN0 & WLAN1) ................................................................................. 8 Table 5 IEEE 802.11 b/g/n Rx sensitivity (WLAN0 & WLAN1) ........................................................................................ 9
WFU032 PRODUCT SPECIFICATION FOXCONN CONFIDENTIAL 4 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved CHAPTER 1. MODULE OVERVIEW The Foxconn WFU032 WLAN module contains the MTK® MT7603U single-chip which is a highly integrated Wi-Fi single chip which supports 300 Mbps PHY rate. It fully complies with IEEE 802.11n and IEEE 802.11 b/g standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance. 1-1 Key Characteristic  CMOS technology with an integrated PA, LNA, RF, Baseband, and MAC  2T2R mode with support for a 300 Mbps Tx/Rx PHY rate  20/40MHz bandwidth  WoWLAN via GPIO(client mode), Support Host Sleep(AP mode)  Reverse direction grant data flow and frame aggregation  Security : WFA WPA/WPA2 personal, WPS2.0, WAPI  QoS: WFA WMM, WMM PS  A full-speed USB 2.0-compliant interface for WLAN 1-2 Certification China SRRC
WFU032 PRODUCT SPECIFICATION FOXCONN CONFIDENTIAL 5 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved 1-3 USB Pin Definition Table 1 Pin Definitions Pin# Name Description 1 RST Reset pin, active low. 2 Vcc +5V Power Supply 3 D- USB Data D- 4 D+ USB Data D+ 5 GND GND 6 WOW Wake on WLAN. Default active low to wake-up the system. (If not used, please floating it.) Vendor: Jiangsu Lezhi Electronics CO.,LTD (江蘇樂智電子科技有限公司) PN: LZE 12500-06AWB
WFU032 PRODUCT SPECIFICATION FOXCONN CONFIDENTIAL 6 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved Figure 1 Connector Drawing
WFU032 PRODUCT SPECIFICATION FOXCONN CONFIDENTIAL 7 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved CHAPTER 2. ELECTRICAL AND RF SPECIFICAITON 2-1 Recommended Operation Rating Table 2 Operation Rating Parameter Min Typ. Max. Unit Vcc 4.5 5 5.5 V RST (Active Low) 2.97 3.3 3.63 V WOW 2.97 3.3 3.63 V VDP / VDM 0 5.5 V RF Interface 50 Ohm Note: WoW is an output pin for wake up host and can be set active high or low by MT7603U WiFi driver. If you don’t use the WoW function, keep floating in hardware design. 2-2 Power On Sequence Figure 2 Power on sequence Note : 1. RST_N must be 30 ms delay at least after Vcc(5V) ready. 2. USB_DP/DM must be delay at least after RST_N. 3. Restart time should be 100ms.
WFU032 PRODUCT SPECIFICATION FOXCONN CONFIDENTIAL 8 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved 2-3 Power Consumption Power consumption is measured using current probe loop on the Power rails of the USB interface (Pins). Table 3 Power Consumption Description Typical (Max) Unit IDLE 56 (61) mA 2G/2T- N mode HT 40MHz MCS 7(14dBm) 131 mA 2G/2T- N mode HT 20MHz MCS 7(14dBm) 206 mA 2G/2T- G mode OFDM54M(15dBm) 220 mA 2G/2T- B mode CCK11M (15dBm) 375 mA 2G/2R- N mode HT 40MHz MCS 7 (-60dBm) 70 mA 2G/2R- N mode HT 20MHz MCS 7 (-60dBm) 65 mA 2G/2R- G mode OFDM54M (-60dBm) 63 mA 2G/2R- B mode CCK11M (-60dBm) 61 mA 2-4 WiFi RF Specification – TX Table 4 IEEE 802.11 b/g/n TX Average Output Power (WLAN0&WLAN1) Data Rate (Mbps) Modulation Tx Typical Power (dBm) Data Rate (Mbps) Modulation Tx Typical Power (dBm) 1 DBPSK 14 HT20-MCS0 BPSK 12 2 DQPSK 14 HT20-MCS1 BPSK 12 5.5 CCK 14 HT20-MCS2 QPSK 12 11 CCK 14 HT20-MCS3 QPSK 12 6 OFDM 15 HT20-MCS4 16-QAM 12 9 OFDM 15 HT20-MCS5 16-QAM 12 12 OFDM 15 HT20-MCS6 64-QAM 12 18 OFDM 15 HT20-MCS7 64-QAM 12 24 OFDM 15 HT40-MCS0 BPSK 12 36 OFDM 15 HT40-MCS1 QPSK 12 48 OFDM 15 HT40-MCS2 QPSK 12 54 OFDM 15 HT40-MCS3 16-QAM 12 HT40-MCS4 16-QAM 12 HT40-MCS5 64-QAM 12 HT40-MCS6 64-QAM 12 HT40-MCS7 64-QAM 12 Tolerance: +0.5dBm/-2dBm
WFU032 PRODUCT SPECIFICATION FOXCONN CONFIDENTIAL 9 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved 2-5 WiFi RF Specification – RX Table 5 IEEE 802.11 b/g/n RX Sensitivity (WLAN0&WLAN1) Data Rate (Mbps) Modulation Rx Sensitivity (dBm) Data Rate (Mbps) Modulation Rx Sensitivity (dBm) Max. Typ. Max. Typ. 1 DBPSK -83 -94 HT20-7.22 BPSK -82 -89.5 2 DQPSK -80 -93 HT20-14.44 QPSK -79 -86 5.5 CCK -83 -91 HT20-21.67 QPSK -77 -84 11 CCK -80 -88 HT20-28.89 16-QAM -74 -81.5 6 OFDM -85 -90 HT20-43.33 16-QAM -70 -78 9 OFDM -84 -88 HT20-57.78 64-QAM -66 -73.5 12 OFDM -82 -87 HT20-65 64-QAM -65 -72 18 OFDM -80 -86 HT20-72.22 64-QAM -64 -70 24 OFDM -77 -83 HT40-15 BPSK -79 -86 36 OFDM -73 -80 HT40-30 QPSK -76 -83 48 OFDM -69 -77 HT40-45 QPSK -74 -81 54 OFDM -68 -75 HT40-60 16-QAM -71 -78 HT40-90 16-QAM -67 -75 HT40-120 64-QAM -63 -70.5 HT40-135 64-QAM -62 -69 HT40-150 64-QAM -61 -67
WFU032 PRODUCT SPECIFICATION FOXCONN CONFIDENTIAL 10 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved CHAPTER 3. MECHANICAL SPECIFICATION 3-1 Module Assembly Dimension Figure 3 Mechanical Drawing
WFU032 PRODUCT SPECIFICATION FOXCONN CONFIDENTIAL 11 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved 3-2 Label Specification Figure 4 Label Drawing
WFU032 PRODUCT SPECIFICATION FOXCONN CONFIDENTIAL 12 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved CHAPTER 4. ADDITIONAL INFORMATION 4-1 EEPROM Information 4-2 Module Photo Figure 5 Top Side Photo Figure 6 Bottom Side Photo 4-3 Environment Specifications Operation Operation Temperature : 0~55 ℃ Relevant Humidity: 5 ~ 90% (non-condensing) Storage Operation Temperature : -20~105 ℃ Relevant Humidity: 5 ~ 90% (non-condensing) WLAN Type Mode PID VID MT7603U WiFi b/g/n 7603 0E8D
WFU032 PRODUCT SPECIFICATION FOXCONN CONFIDENTIAL 13 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
WFU032 PRODUCT SPECIFICATION FOXCONN CONFIDENTIAL 14 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: RX3-WFU032”. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
WFU032 PRODUCT SPECIFICATION FOXCONN CONFIDENTIAL 15 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved Canada, Industry Canada (IC) Statement This Class B digital apparatus complies with Canadian ICES-003. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. RF Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Required end product labeling: Any device incorporating this module must include an external, visible, permanent marking or label which states: “Contains IC: 2878F-WFU032” This radio transmitter (identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna Type: PIFA Peak Gain: 3.82dBi
WFU032 PRODUCT SPECIFICATION FOXCONN CONFIDENTIAL 16 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved Canada, Industrie Canada (IC ) Déclaration Cet appareil numérique de classe B est conforme à la norme NMB-003. Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence.L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage adioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Déclaration d'exposition aux radiations: Cet appareil est conforme aux limites d'exposition aux rayonnements définies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à une distance minimale de 20 centimètres entre le radiateur et votre corps. Obligation d'étiquetage du produit final: Tout dispositif intégrant ce module doit comporter un externe, visible, marquage permanent ou une étiquette qui dit: "Contient IC : 2878F - WBUA31". Cet émetteur radio ( identifier le dispositif par numéro de certification ou le numéro de modèle , si la catégorie II ) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous avec le gain maximal admissible indiqué . types d'antennes non inclus dans cette liste , ayant un gain supérieur au gain maximum indiqué pour ce type , sont strictement interdits pour une utilisation avec cet appareil. Type d'antenne: PIFA Pic Gain: 3.82dBi

Navigation menu