Honda Lock Mfg HLIK-1R Part 15 Remote Security Transmitter User Manual

Honda Lock Mfg. Co., Ltd. Part 15 Remote Security Transmitter

User Manual

As required by the FCC:This device complies with Part 15 of theFCC rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept anyinterference received, includinginterference that may cause undesiredoperation.Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’sauthority to operate the equipment.This device complies with IndustryCanada Standard RSS-210.Operation is subject to the following twoconditions: (1) this device may not causeinterference, and (2) this device mustaccept any interference that may causeundesired operation of the device.The immobilizer system protectsyour vehicle from theft. If animproperly-coded key (or otherdevice) is used, the engine’s fuelsystem is disabled.The system may not recognize yourkey’s coding if another immobilizerkey or other metal object (i.e. keyfob) is near the ignition switch whenyou insert the key.If the system repeatedly does notrecognize the coding of your key,contact your dealer.Do not attempt to alter this systemor add other devices to it. Electricalproblems could result that may makeyour vehicle undriveable.If you have lost your key and cannotstart your engine, contact yourdealer.When you turn the ignition switch tothe ON (II) position, the immobilizersystem indicator should come onbriefly, then go off. If the indicatorstarts to blink, it means the systemdoes not recognize the coding of thekey. Turn the ignition switch to theLOCK (0) position, remove the key,reinsert it, and turn the ignitionswitch to the ON (II) position again.Immobilizer System76０５／０５／２６ １７：１７：３５ ３１ＳＮＡ６００ ００７９ 
＋−≦≦≦Remove the old battery from theback of the inner cover, and inserta new battery into the back of thecover with the side facing down.Install the parts in reverse order.An improperly disposed batterycan hurt the environment.Always confirm local regulationsfor battery disposal.4.5.Keyless Entry FunctionWhen using radio equipment withvery small output capacity, theequipment must accept anyinterference caused by the emissionof various radio communicationequipment as well as industrial,scientific and medical facilities.Use of such radio equipment isprohibited in an aeroplane and aroundan airport.Modulation Mode: FSKFrequency Range: 313 314 MHzTransmitting Power: 6000 V/m (3m)Occupied Bandwith: 300 kHzSpurious Emission Limits: 600 V/m(3 m)The equipment shall not cause anyharmful interference with variousauthorized radio communication. Ifsuch interference is detected,operation of the equipment shall besuspended until a measure is taken toremove such interference.The user shall not change thetransmission frequency, amplify theoutput capacity by such means asinstalling a transmission amplifier,install another aerial, or replace theoriginal transmission aerial withoutpermission of the Authority.Instruments and ControlsRemote TransmitterChinese Regulations for ControllingShort Range Radio Equipment8406/03/20 16:43:07 32SDRT00_089
＋Inside the transmitter, separatethe inner cover from the keypadby releasing the two tabs on thecover.Remove the old battery from theback of the inner cover, and notethe polarity. Make sure thepolarity of the new battery is thesame ( side facing down), theninsert it into the back of the cover.Install the parts in reverse order.3.4.5.As required by the FCC:This device complies with Part 15 of theFCC rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept anyinterference received, includinginterference that may cause undesiredoperation.Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’sauthority to operate the equipment.This device complies with IndustryCanada Standard RSS-210.Operation is subject to the following twoconditions: (1) this device may not causeinterference, and (2) this device mustaccept any interference that may causeundesired operation of the device.Remote TransmitterInstruments and Controls87TABBATTERY０５／０５／２６ １７：１９：２４ ３１ＳＮＡ６００ ００９０ 

Navigation menu