Honda Lock Mfg HLIS-1 Vehicle Security Transceiver User Manual 2 of 2

Honda Lock Mfg. Co., Ltd. Vehicle Security Transceiver 2 of 2

Contents

User Manual 2 of 2

When you turn the ignition switch toON (II), the Immobilizer Systemindicator should come on for a fewseconds, then go out. If the indicatorstarts to blink, it means the systemdoes not recognize the coding of thekey. Turn the ignition switch toLOCK (0), remove the key, reinsertit, and turn the switch to ON (II)again.The system may not recognize yourkey’s coding if another immobilizerkey or other metal object (i.e. keyfob) is near the ignition switch whenyou insert the key.If the system repeatedly does notrecognize the coding of your key,contact your dealer.Do not attempt to alter this systemor add other devices to it. Electricalproblems could result that may makeyour vehicle undriveable.If you have lost your key and cannotstart your engine, contact yourdealer.The Immobilizer System protectsyour vehicle from theft. If animproperly-coded key (or otherdevice) is used, the engine’s fuelsystem is disabled.As required by the FCC:This device complies with Part 15 of theFCC rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept anyinterference received, includinginterference that may cause undesiredoperation.Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’sauthority to operate the equipment.This device complies with IndustryCanada Standard RSS-210.Operation is subject to the following twoconditions: (1) this device may not causeinterference, and (2) this device mustaccept any interference that may causeundesired operation of the device.Immobilizer System52０４／０７／２１ １２：１８：４５ ３１Ｓ２Ａ６５０ ００５５ 

Navigation menu