Honda Lock Mfg HLIS-1 Vehicle Security Transceiver User Manual 2 of 2

Honda Lock Mfg. Co., Ltd. Vehicle Security Transceiver 2 of 2

Contents

User Manual 2 of 2

Download: Honda Lock Mfg HLIS-1 Vehicle Security Transceiver User Manual 2 of 2
Mirror Download [FCC.gov]Honda Lock Mfg HLIS-1 Vehicle Security Transceiver User Manual 2 of 2
Document ID553146
Application ID4NH8VBfKKolQV5kANaqtmA==
Document DescriptionUser Manual 2 of 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize1.68kB (20944 bits)
Date Submitted2005-06-17 00:00:00
Date Available2005-06-17 00:00:00
Creation Date2005-04-06 09:51:24
Producing SoftwareAcrobat Distiller 4.05 for Macintosh
Document Lastmod2005-04-06 09:52:06
Document TitleUser Manual 2 of 2

04/07/21
12:18:45
31S2A650
0055
Immobilizer System
The Immobilizer System protects
your vehicle from theft. If an
improperly-coded key (or other
device) is used, the engine’s fuel
system is disabled.
When you turn the ignition switch to
ON (II), the Immobilizer System
indicator should come on for a few
seconds, then go out. If the indicator
starts to blink, it means the system
does not recognize the coding of the
key. Turn the ignition switch to
LOCK (0), remove the key, reinsert
it, and turn the switch to ON (II)
again.
The system may not recognize your
key’s coding if another immobilizer
key or other metal object (i.e. key
fob) is near the ignition switch when
you insert the key.
52
If the system repeatedly does not
recognize the coding of your key,
contact your dealer.
Do not attempt to alter this system
or add other devices to it. Electrical
problems could result that may make
your vehicle undriveable.
If you have lost your key and cannot
start your engine, contact your
dealer.
As required by the FCC:
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s
authority to operate the equipment.
This device complies with Industry
Canada Standard RSS-210.
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must
accept any interference that may cause
undesired operation of the device.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2005:04:06 09:52:06+09:00
Create Date                     : 2005:04:06 09:51:24+09:00
Producer                        : Acrobat Distiller 4.05 for Macintosh
Page Count                      : 1
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MLBHLIS-1

Navigation menu