Honeywell orporated DR4208K Access Control Proximity Reader User Manual 6 28 02

Download:
Mirror Download [FCC.gov]
Document ID	268089
Application ID	vwKYJxlOgGG+i+IJYyZ/UA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.74kB (271801 bits)
Date Submitted	2002-09-05 00:00:00
Date Available	2002-09-04 00:00:00
Creation Date	2002-06-28 09:24:23
Producing Software	Acrobat PDFWriter 4.05 for Windows
Document Lastmod	2002-06-28 13:25:00
Document Title	6-28-02.PDF
Document Creator	7600051A
Document Author:	collinst

DigiReader DR4208K Installation Notes
DIGIREADER DR4208K INSTALLATION NOTES
DIP ADDRESS SWITCH
The DR4208K reader has a 10-position DIP-switch S1, (as shown
to the right, with S-NET address 1 selected for 9600 S-NET baud).
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
Off
On
On
Off
Off
On
On
Off
Off
On
On
Off
Off
On
On
Off
Off
On
On
Off
Off
On
On
Off
Off
Off
Off
On
On
On
On
Off
Off
Off
Off
On
On
On
On
Off
Off
Off
Off
On
On
On
On
Switch S1 Settings
4 5 6 7 8
Off Off Off
Off Off Off
Off Off Off
Off Off Off
Off Off Off
Off Off Off
Off Off Off
Off Off Off
On Off Off
On Off Off
On Off Off
On Off Off
On Off Off
On Off Off
On Off Off
On Off Off
Off On Off
Off On Off
Off On Off
Off On Off
Off On Off
Off On Off
Off On Off
Off On Off
S-NET Address/
Function
9 10
X EOL Off-line 0
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
10
X X
11
X X
12
X X
13
X X
14
X X
15
X X
16
X X
17
X X
18
X X
19
X X
20
X X
21
X X
22
X X
23
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
Off
Off
On
On
Off
Off
On
On
On
On
Off
Off
On
On
Off
Switch S1 Settings
Off On On Off
Off On On Off
Off On On Off
Off On On Off
On On On Off
On On On Off
On On On Off
On On On Off
Off On Off On
Off On Off On
On On Off On
On On Off On
On On Off On
On On Off On
Off Off On On
Off Off
On Off
Off On
On On
10
Off
On
Off
On
S-NET Address/Function
24
25
26
27
28
29
30
31
Wiegand I/F (26-bit - 2A HEX) 2-LEDs
Wiegand I/F (34-bit - 2B HEX) 2-LEDs
Wiegand I/F (26-bit - 2C HEX) 1-LED
Wiegand I/F (34-bit - 2D HEX) 1-LED
TEST Mode - 2E HEX
DEMO Mode - 2F HEX
Wiegand I/F (42-bit - 30 HEX) 1-LED
DKR ONLY
DKR + VIP
MSR+VIP (MSRK)
Wiegand S-NET
9600 S-NET Baud
19200 S-NET Baud
No End of Line Terminator
End of Line Terminator
INTERNAL INTERFACE CABLE
An attached pigtail cable assembly provides the connection from the printed-circuit assembly
to the access control unit wiring on a DigiReader DR4208K. The cable is color-coded as follows:
COLOR
Red
Green
White
Black
Shield
Blue
Orange
Yellow
Brown
FUNCTION
+10.8 to +28VDC *
(max. draw 130mA)
S-NET A
S-NET B
GND
Earth
Data 0 (Out 0)
Data 1 (Out 1)
LED 0
LED 1
(S-NET Use)
(Wiegand Use)
S-NET Nominal
Wiegand Nominal
For use with NexWatch
access control panels
S-NET DC Return
S-NET Shield
NA
Wiegand DC Return
Wiegand Shield: Tied to Wiegand DC Return
For use with Wiegand access control panels
NA
(Green)
(Red)
Both LEDs are ACU-controlled
and are ON/low or OFF/high
* For tolerance reasons, the UL tested voltage range is 12.5 to 24VDC +/-15%.
P/N 7600051 Rev. A
6/28/02
Page 1 of 2
DigiReader DR4208K Installation Notes
TAMPER
The DR4208K sends a tamper signal to an S-NET-based ACU when a tamper occurs.
WALL-MOUNTING INSTRUCTIONS (WITH SCREWS):
To obtain the maximum performance from
the DR4208K reader, NexWatch recommends
mounting the reader at least 10 inches away
from any conducting metal.
Mount the reader base to the wall, using the
back of the unit as a drilling template. Use
the NexWatch-supplied 1¼” Flathead #6-32
thread screws (or other means appropriate
to the wall composition).
Put the DigiReader cover in place and secure
the cover from the bottom with the supplied
screws.
1 2 3
4 5 6
7 8 9
* 0 #
Compliance Statement (Part 15.19)
This device complies with Part 15 Subpart C of the FCC rules and with the RSS-210 of
Industry Canada. Operation is subject to the following two conditions: 1) This device
may not cause harmful interference; and 2) This device must accept any interference
received, including interference that may cause undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
FOR FURTHER DETAILS:
Please consult, via the Internet, the
DigiReader Series Installation and Operation Manual, Part Number 6600025.
an ISO 9001 certified company
P/N 7600051 Rev. A
6/28/02
Page 2 of 2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Creator                         : 7600051A
Create Date                     : 2002:06:28 09:24:23
Title                           : 6-28-02.PDF
Author                          : collinst
Producer                        : Acrobat PDFWriter 4.05 for Windows
Modify Date                     : 2002:06:28 13:25:00-07:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools