Honeywell orporated DR4208S Door Access Controller User Manual Digireader
Honeywell International Incorporated Door Access Controller Digireader
Installation Manual
P/N 7600022, REV. A
DIGIREADER DR4208S INSTALLATION NOTES
INTERNAL INTERFACE CABLE
An attached pigtail cable assembly provides the connection from the printed-circuit assembly to
the access control unit wiring on DigiReader DR4208S. The cable is color coded as follows:
ROLOC NOITCNUF )esUteN-S( )esUdnageiW(
deRCDV82+ot21+ lanimoNteN-SAN
ANlanimoNdnageiW
neerG)+ataD(AteN-S ESWhtiwesuroF sseccateN-S slenaplortnoc AN
etihW)-ataD(BteN-S
kcalBnruteRCDnruteRCDteN-SnruteRCDdnageiW
dleihSdleihSlangiSdleihSteN-SnruteRCDdnageiWotdeiT:dleihSdnageiW
eulB)0tuO(0ataD
ANslenaplortnocsseccadnageiWhtiwesuroF
egnarO)1tuO(1ataD
wolleY0DEL
nworB1DEL
DIP ADDRESS SWITCH
The DR4208S reader has a 5-position DIP-switch S1, (as
shown to the right, with S-Net address 1 selected).
NO
123 45
FFO
)sgnitteS(1ShctiwS teN-S rosserddA noitcnuF
)sgnitteS(1ShctiwS teN-S rosserddA noitcnuF
1 2 3 4 5 1 2 3 4 5
ffOffOffOffOffO0enil-ffO
nO ffOffOffOffO1
nO nO ffO nO ffO11
ffO nO ffOffOffO2ffOffO nO nO ffO21
nO nO ffOffOffO3
nO ffO nO nO ffO31
ffOffO nO ffOffO4ffO nO nO nO ffO41
nO ffO nO ffOffO5
nO nO nO nO ffO51
ffO nO nO ffOffO6ffOffOffOffO nO 61
nO nO nO ffOffO7ffO nO ffO nO nO )tib-62(F/IdnageiW
ffOffOffO nO ffO8
nO nO ffO nO nO )tib-43(F/IdnageiW
nO ffOffO nO ffO9ffO nO nO nO nO edoMOMED
ffO nO ffO nO ffO01nO nO nO nO nO edoMTSET
DigiReader DR4208S Installation Notes
P/N 7600022, REV. A
PHONE (510) 360-7800
FAX (510) 360-7820
an ISO 9001 certified company
47102 Mission Falls Court
Fremont, CA 94539-7818
Contacting Honeywell
Phone: 1-800-227-1667
M-F 6:00am - 6:00pm (PST)
E-mail: WSEHelp@wse.com
Internet: http://www.wse.com
WALL MOUNTING INSTRUCTIONS (WITH SCREWS):
• Mount the reader base to the wall, using the back of the unit as a drilling template. Use the
WSE-supplied, 1¼" Flathead, #6-32 thread screws (or other means appropriate to the wall
composition).
• Put the DigiReader cover in place and secure the cover from the bottom with the supplied
screw(s).
FOR FURTHER DETAILS:
Please consult the
DigiReader Series Installation and Operation Manual,
Part No.6600025.
TAMPER
• The DR4208S sends a tamper signal to an S-Net-based ACU when a tamper occurs.