Honeywell 1602-A Barcode Scanner User Manual Xenon 1900 Quick Start Guide

Honeywell International Inc Barcode Scanner Xenon 1900 Quick Start Guide

Contents

User manual_1

Voyager 1602gWireless Area-Imaging Pocket ScannerQuick Start Guide5/15PreliminaryDraft 4/27/15Aller à www.honeywellaidc.com pour le français. Vai a www.honeywellaidc.com per l'italiano. Gehe zu www.honeywellaidc.com für Deutsch. Ir a www.honeywellaidc.com para español. Idź na stronę : www.honeywellaidc.com po quick start w języku polskim. Перейти на русскоязычный сайт www.honeywellaidc.com. Pro češtinu jdi na www.honeywellaidc.com. Pre slovenčinu choď na www.honeywellaidc.com Para Português, acesse www.honeywellaidc.com.br. 日本語 : www.honeywellaidc.com をご覧ください。如要到中国 www.honeywellaidc.com（简体）。查看繁体版请登陆 www.honeywellaidc.com한글 www.honeywellaidc.com 로 이동합니다 .ʲʡʤʱʸʢʬʡʺʩʸˬʺʡʥʺʫʡʨʰʸʨʰʩʠʤʸʺʠʬʸʥʡʲwww.honeywellaidc.com.Çäè´á Åàˆ moc.cdiallewyenoh.www ààú¬ ÇàõÑéí¬
Note: Refer to your User’s Guide for information about cleaning your device.Getting Started The scanner’s battery must be fully charged before the first use. It can be charged using a power supply or by connecting the USB cable to a computer. Charging via Power Supply: Note: The power supply must be ordered separately, if needed.
Connecting the Scanner to a USB port:Turn off the computer’s power before connecting the scanner, then power up the computer once the scanner is fully connected.
Battery Charge IndicatorWhen the battery is charging, the small LED at the top left of the scanner flashes orange. When the battery is fully charged, this LED is solid green.Reading TechniquesThe scanner projects an aiming beam that should be centered over the bar code, but it can be posi-tioned in any direction for a good read. Hold the scanner over the bar code, press the button, and center the aiming beam on the bar code.The aiming beam is smaller when the scanner is closer to the code and larger when it is farther from the code. Hold the scanner close to smaller bar codes, and farther away from large bar codes to get a proper read.
If the bar code is highly reflective (e.g., laminated), you may need to tilt the scanner at an angle so the bar code can be scanned.Note: If the scanner beeps 3 times when scanning a bar code, the link has not been established. If the scanner beeps once, the link has been established.Standard Product DefaultsScan the following bar code to reset the scanner to all standard product default settings.Standard Product DefaultsUsing the Scanner with Bluetooth DevicesThe scanner can be used either with a Honeywell Access Point (AP01-XXXBT) or with other Bluetooth devices. Those devices include personal computers, laptops, and tablets. 1. Scan the Bluetooth HID Keyboard Connect bar code below. Bluetooth HID Keyboard Connect2. Set your personal computer, laptop, or tablet so it searches for other Bluetooth devices. (Refer to your device’s User’s Guide for pairing instructions.) 3. Once your personal computer, laptop, or tablet has located the scanner, select the scanner name. Some personal computers, laptops, or tablets will automatically pair with the scanner. If your device automatically pairs with the scanner, it displays a
successful pairing message and you do not need to continue to the next step.4. If your personal computer, laptop, or tablet does not automatically pair with the scanner, a PIN is displayed. This PIN must be scanned within 60 seconds. You must quickly scan Bluetooth PIN Code below, then scan the numeric bar code(s) for the PIN code from the Programming Chart, then scan the Save bar code.Bluetooth PIN CodeYour personal computer, laptop, or tablet should now be paired with the scanner.Disconnect from Host and Connect to an Access PointIf your scanner has been connected directly to an iPad, smart phone, or laptop, you must disconnect it in order to communicate with an Access Point. Scan the Bluetooth HID Keyboard Discon-nect bar code to unlink the scanner from the currently linked host. Scan the linking bar code on the Access Point to relink the scanner.Bluetooth HID Keyboard Disconnect
Keyboard CountryYour keyboard layout default is a US keyboard. To change this lay-out, refer to the following chart for your keyboard country. Scan the Program Keyboard Country bar code, then scan the numeric bar code(s) for the appropriate Country Code from page 2, then scan the Save bar code.By default, national character replacements are used for the follow-ing characters: #$@[\]^‘{|}~ Refer to the ISO 646 Character Replacements chart in your User’s Guide to view the character replacements for each country.Program Keyboard Country Country Code Scan Country Code ScanBelgium 1Italy 5Denmark 8Norway 9Finland 2Spain 10France 3Switzerland 6Germany/Austria 4USA (Default) 0Great Britain 7SaveNote: For a complete list of country codes, see the User’s Guide for your product at our website, www.honeywellaidc.com.
SuffixIf you want a carriage return after the bar code, scan the Add CR Suffix bar code. To add a tab after the bar code, scan the Add Tab Suffix bar code. Otherwise, scan the Remove Suffix bar code to remove the suffixes.Add CR SuffixRemove SuffixAdd Tab SuffixFor additional prefix and suffix settings, see the User’s Guide for your product at our website, www.honeywellaidc.com.Add Code ID Prefix to all SymbologiesScan the following bar code if you wish to add a Code ID prefix to all symbologies at once.Add Code ID Prefix To All Symbologies(Temporary)Note: For a complete list of Code IDs, see the User’s Guide for your product at our website, www.honeywellaidc.com.
Function Code TransmitWhen this selection is enabled and function codes are contained within the scanned data, the scanner transmits the function code to the terminal. Charts of these function codes are provided in your User’s Guide. When the scanner is in keyboard wedge mode, the scan code is converted to a key code before it is transmitted.Enable(Default)Disable
Data Format Editor InstructionsThe following are abbreviated instructions for entering a data format. For complete instructions refer to your User’s Guide, available at our website, www.honeywellaidc.com.1. Scan the Enter Data Format symbol.2. Primary/Alternate Format: scan 0 for Primary Format3. Terminal Type: scan 099 for any terminal type4. Code I.D.: scan 99 for any bar code type5. Length: scan 9999 for any length bar code.6. Editor commands: use the Programming Chart that follows.7. Scan Save to save your entries.Enter Data FormatClear All Data FormatsSave
Programming Chart02143567
ABCDEF98Save
EZConfig-ScanningTo access additional features for the scanner use EZConfig-Scanning, an online configuration software tool, available from our website at www.honeywellaidc.com. Technical AssistanceContact information for technical support, product service, and repair can be found at www.honeywellaidc.com.Limited WarrantyRefer to www.honeywellaidc.com/warranty_information for your product’s warranty information.PatentsFor patent information, refer to www.hsmpats.com.User DocumentationFor localized versions of this document, and to download the User’s Guide, go to www.honeywellaidc.com.DisclaimerHoneywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII.2015 Honeywell International Inc. All rights reserved.Web Address: www.honeywellaidc.com

Navigation menu