Honeywell 202517TXR Motion Sensor User Manual K595 Datasheet v 2 19 2013

Download:
Mirror Download [FCC.gov]
Document ID	1905029
Application ID	eSgcjOdA5gYICWyn62T2Pg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	41kB (512549 bits)
Date Submitted	2013-02-22 00:00:00
Date Available	2013-08-21 00:00:00
Creation Date	2013-02-20 15:20:54
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2013-02-20 15:20:54
Document Title	Microsoft Word - K595 Datasheet v 2-19-2013.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	mahussain

K595 Motion Sensor Datasheet
Overview
The K595 wall mounted passive infrared (PIR) motion detector (Figure 1) adds
occupancy sensing and peripheral-status reporting capability to INNCOM
integrated guestroom control systems. The K595 is designed with a sleek
screwless design that has the same look and feel as the INNCOM MODEVA
system. The K595 can be a key participant in an INNCOM Integrated Room
Automation System (IRAS) Deep Mesh network.
The K595, in conjunction with auxiliary input, a room controller, and an inroom communication network, helps determine guestroom occupancy.
Occupancy sensing leads to better management of energy usage and security;
extends heating, ventilation, and air conditioning equipment life; enhances the
overall operating efficiency of the hotel; and improves guest satisfaction.
The K595 can also monitor and report on the status (e.g., open/closed) of other
devices within the guestroom (see Application below).
Features
•
•
•
•
•
•
•
120° view angle
Flush screwless magnetic mounting
Easy installation
No maintenance
Long battery life
2.4Ghz IEEE 802.15.4 compliant RF transceiver (CC2430 radio core)
FCC Part 15b listed
Figure 1 K595
Application
The K595 microprocessor-controlled PIR detects motion in a guestroom and reports it to the room controller.
Combined with information from other inputs (such as a lanai or window switch or a minibar), guestroom
occupancy can be determined and used for energy control or lighting decisions. Occupancy information may also
be signaled to Housekeeping using the corridor doorbell display or a floor-level terminal. The K595 can provide
an audit trail for Security, and it can be networked to the hotel’s central server.
On power up, the K595 will flash the LED for approximately two seconds as it configures itself using settings in
nonvolatile memory (see table below) and transmits a beacon frame (SAC_ALARM_K594_REPORT). The K595
will then go into Operation Mode, where it checks the auxiliary input, the motion detector, and the Bind switch
status. The K595 will process any actions instigated by those checks; after that (or if there is no action), it will
enter a low-power state (Sleep Mode) to conserve battery power. (See also the uCBL Engineering Manual.)
The K595 can also act as a minibar server if the I/O Map is so programmed. For details, see the uCBL Engineering
Manual, Sec. 2.4.2. Factory Default NVM Configuration.
Page |2
K595 Datasheet
Description
Room ID
RF Channel
TX Power
P5 Address
P5 Channel
I/O Map
Value
65535
26
0x5F (0dB)
189
255
Installation
The individual guestroom design determines the K595’s installation location. Placement should provide
maximum room coverage by the PIR motion detector while maintaining RF communication between the device
and the e4 thermostat. Ideally, the K595 should be positioned on a wall in opposition to entrances and interior
doors (8ft. high, 0° angle, 0° pitch). The K595 PIR lens is pitched at a downward angle of 60° for optimal range
and minimized blind area below the unit. It should be positioned to view both the guestroom entry door and the
bed areas.
The K595 should be mounted within operational range of the e4 thermostat and any other devices it may
communicate with. Avoid possible sources of radio interference such as metallic boxes, WiFi access points,
microwave ovens, water pipes, and the like.
Refer to the K595 Installation Manual for detailed installation instruction.
Commissioning
Refer to the K595 Installation Manual or the uCBL Engineering Manual for commissioning instructions.
Page |3
K595 Datasheet
K595 PIR Range Chart:
Figure 2 K595 PIR Range
Table 1 K595 Range and View Angle Data
Angle
-60°
-45°
0°
+45°
+60°
Distance (Feet)
27ft
27ft
33ft
28.5ft
33ft
Distance (Meters)
9.0m
9.0m
11m
9.5m
11m
Page |4
K595 Datasheet
Operational Coverage for K595
Figure 3 K595 Coverage
Page |5
K595 Datasheet
PIR Specification
Parameter
No. of Fresnel beams
No. of curtain beams
Max. coverage
Sensitivity
K595
27
9+5
See Figure 2
0.5m–12m (1.64-40 ft.)
RF Specification
Parameter
RF Data Rate
Antenna Type
Indoor Range
Transmit Power
Receive Sensitivity
Frequency Band
Encryption
Protocol
Frequency Channels
K595
250kbps
SMT
70ft
1mW (+0dBm)
-94.6dBm
2.4Ghz
AES-128
802.15.4
11-26
Technical Specification
Parameter
Input voltage
Battery Life
Operating temperature
Storage temperature
K595
4xAA Batteries
2.2 years
0 °C to 60 °C (32 °F to 140 °F)
-20 °C to 60 °C (-4 °F to 140 °F)
Headers and Connectors
Header
H1
H2
H3
Connector
Digital Input
ICP
Battery Input
Safety/Regulatory
Parameter
Condition
Status
FCC
Part 15b
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
Deleted: H2
Page |6
K595 Datasheet
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur
de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Deleted: ¶
re ordering Information
Part Number
OPN
201-595
K595
Description
Wall Mounted Motion Detector
Formatted Table
References
Title
uCBL Device Engineering Manual v1.4
K595 Installation Manual v1.0
Location
T:\Library\INNCOM Products\Systems\IRAS Reference\uCBL
T:\Library\INNCOM Documentation Library\Product
Documentation\Product Documentation Source
Document Revision History
Revision
0.1
v1.0
Date Issued
02-May-2012
07-May-2012
Reason
Initial Draft.
First release
Deleted:

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 6
Producer                        : GPL Ghostscript 8.15
Create Date                     : 2013:02:20 15:20:54
Modify Date                     : 2013:02:20 15:20:54
Title                           : Microsoft Word - K595 Datasheet v 2-19-2013.doc
Creator                         : PScript5.dll Version 5.2.2
Author                          : mahussain

EXIF Metadata provided by EXIF.tools