Honeywell 51306343 51306343 User Manual Ext Temp Pro Install guide
Honeywell International Inc. 51306343 Ext Temp Pro Install guide
Contents
- 1. Ext Temp Pro Install guide
- 2. Users Guide
- 3. Standard Temp Pro Install Guide
Ext Temp Pro Install guide
Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 OneWireless Extended Temperature Multinode Professional Installation Guide Honeywell Industrial Automation and Control Ft. Washington, Pennsylvania NOTICE – HONEYWELL INTERNATIONAL, INCORPORATED TRADE SECRET - PROPRIETARY Proprietary Notice: This document and the information contained herein are confidential to, and the property of Honeywell, Inc. This document and the information contained herein is made available only to employees of Honeywell, for the sole purpose of conducting Honeywell's business. This document, and the information contained herein, shall be maintained in strictest confidence; shall not be copied in whole or in part; and shall not be disclosed or distributed to persons who are not employees of Honeywell, and for whom such information is not necessary in connection with their assigned responsibilities. Upon request, or when the employee in possession of this document no longer has need for this document for the authorized Honeywell purpose, this document shall be returned to the employee's manager. There shall be no exceptions to the terms and conditions set forth herein except as authorized in writing by the responsible Honeywell Vice President. PRELIMINARY FCF: OneWireless Extended Temperature Multinode Professional Installation Guide FMF: Made by: David Shipley Issue: AT8, 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 1 of 36 Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 APPROVAL SIGNATURES _________________________________________________________________ Soroush Amidi, Product Marketing Date _________________________________________________________________ William Osei-Bonsu, Hardware Engineering Date _________________________________________________________________ David Shipley, Agency Compliance Date Revision Record Revision AT6 FCF: Date 03-JUL-2008 Purpose/Distribution Draft for Peer Review and signature sign off OneWireless Extended Temperature Multinode Professional Installation Guide FMF: Made by: David Shipley Issue: AT8, 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 2 of 36 Honeywell Proprietary and Confidential AT8 51121312 REVISIONS TABLE OF CONTENTS DESIGNATION, SCOPE AND PREFACE........................................................................................... 6 1.1 DESIGNATION ..................................................................................................................................... 6 1.1.1 Model Numbers and Revisions :..................................................................................................6 1.2 SCOPE ............................................................................................................................................... 6 1.3 PREFACE ........................................................................................................................................... 6 1.4 ABBREVIATIONS & DEFINITIONS ........................................................................................................... 7 2.1 3.1 FEDERAL COMMUNICATION COMMISSION (FCC) ........................................................................ 8 FCC COMPLIANCE STATEMENTS ......................................................................................................... 8 INDUSTRY CANADA (IC).................................................................................................................... 8 IC COMPLIANCE STATEMENTS............................................................................................................. 8 RF SAFETY STATEMENT: ................................................................................................................. 9 FCC AND INDUSTRY CANADA (IC) IDENTIFICATION NUMBERS:.............................................. 10 5.1 5.2 6.1 6.2 6.3 7.1 7.2 8.1 8.2 8.3 8.4 8.5 8.6 8.7 FCC IDENTIFICATION NUMBERS: ....................................................................................................... 10 INDUSTRY CANADA IDENTIFICATION NUMBERS: .................................................................................. 10 INTENDED COUNTRY USAGE ........................................................................................................ 11 NORTH AMERICA ......................................................................................................................... 11 AUSTRALIA AND NEW ZEALAND................................................................................................ 11 EUROPEAN UNION....................................................................................................................... 11 MULTINODE GENERAL DESCRIPTION.......................................................................................... 12 INTENDED USE ................................................................................................................................. 12 MULTINODE DEVICE DIAGRAMS ......................................................................................................... 12 PRODUCT SPECIFICATIONS........................................................................................................... 13 FREQUENCY HOPPING SPREAD SPECTRUM (DSSS) RADIO, 2.4GHZ.................................................. 13 FREQUENCY HOPPING SPREAD SPECTRUM (FHSS) RADIO, 2.4GHZ .................................................. 14 IEEE 802.11A/B/G (WI-FI) RADIOS .................................................................................................. 15 MULTINODE USER ENVIRONMENT ...................................................................................................... 16 MULTINODE POWER SPECIFICATIONS ................................................................................................ 16 WEIGHT ........................................................................................................................................... 16 DIMENSIONS ..................................................................................................................................... 17 CABLES ............................................................................................................................................. 18 9.1 9.2 EXTERNAL INTERFACE CABLES .......................................................................................................... 18 ANTENNA CABLES............................................................................................................................. 19 10 ANTENNA LIGHTNING ARRESTORS ............................................................................................. 19 10.1 10.2 11 FCF: FOR USE WITH INTEGRAL OR REMOTE ANTENNA(S) ............................................................................ 19 FOR USE WITH REMOTE ANTENNA(S) ................................................................................................. 19 APPROVED ANTENNA TYPES/GAINS ........................................................................................... 20 OneWireless Extended Temperature Multinode Professional Installation Guide FMF: Made by: David Shipley Issue: AT8, 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 3 of 36 Honeywell Proprietary and Confidential 11.1 11.2 AT8 51121312 REVISIONS DSSS, FHSS 2.4GHZ RADIO: ......................................................................................................... 20 802.11A/B/G ACCESS POINT AND BRIDGE (MESH) RADIO ................................................................... 21 12 EQUIVALENT ISOTROPICALLY RADIATED POWER (EIRP)........................................................ 22 13 EIRP LIMITS, DSSS 2.4GHZ RADIO ................................................................................................ 23 14 EIRP LIMITS, FHSS 2.4GHZ RADIO.................................................................................................24 15 EIRP LIMITS, 802.11A (5.8GHZ) ACCESS POINT AND BRIDGE RADIO...................................... 25 16 EIRP LIMITS, 802.11A (5.4GHZ) ACCESS POINT AND BRIDGE RADIO...................................... 26 17 EIRP LIMITS, 802.11B/G (2.4GHZ) ACCESS POINT AND BRIDGE RADIO .................................. 27 18 SETTING POWER AND COUNTRY CODE: DSSS-FH RADIO ....................................................... 28 19 SETTING POWER & COUNTRY CODE: 802.11 ACCESS POINT & BRIDGE RADIO .................. 29 19.1 POWER SETTING REFERENCE TABLE, 802.11 ACCESS POINT & BRIDGE RADIO:................................. 31 20 RF SAFETY, MAXIMUM PERMISSIBLE EXPOSURE (MPE) STATEMENT ................................... 32 21 AGENCY COMPLIANCE ................................................................................................................... 33 21.1 RADIO AND EMC CERTIFICATIONS .................................................................................................... 33 21.1.1 Federal Communication Commission (FCC)......................................................................... 33 21.1.2 Industry Canada (IC) ............................................................................................................. 33 21.1.3 European Telecommunications Standards Institue (ETSI) ................................................... 33 21.1.4 Australian communications and media authority (ACMA)..................................................... 33 21.2 PRODUCT SAFETY AGENCY CERTIFICATIONS ..................................................................................... 34 21.2.1 Canadian Standards Association (CSA) ............................................................................... 34 21.2.2 Factory Mutual (FM) .............................................................................................................. 35 21.2.3 European ATEX Certification (ATEX).................................................................................... 36 21.3 EUROPEAN UNION CERTIFICATION (CE-MARK)................................................................................... 36 22 FCF: REFERENCE DOCUMENTS ............................................................................................................. 36 OneWireless Extended Temperature Multinode Professional Installation Guide FMF: Made by: David Shipley Issue: AT8, 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 4 of 36 Honeywell Proprietary and Confidential AT8 51121312 REVISIONS LIST OF FIGURES Figure 1 –Diagram of Multinode Unit showing various external attributes ____________________________ 12 Figure 2 – Dimension of the Multinode Device _________________________________________________ 17 LIST OF TABLES Table 1 – Assembly Number and Revision........................................................................................................... 6 Table 2 –Table of Abbreviations and Definitions .................................................................................................. 7 Table 3 – Specifications of DSSS Radio in Multinode Device. ........................................................................... 13 Table 4 – Specifications of FHSS Radio in Multinode Device. ........................................................................... 14 Table 5 – IEEE 802.11a/b/g Wi-Fi Radio Specifications..................................................................................... 15 Table 6 – Specifications User Environment Multinode Device. .......................................................................... 16 Table 7 – Power Specifications Multinode Device. ............................................................................................. 16 Table 8 – External Cable Specification for Multinode Device. ............................................................................ 18 Table 9 - Antenna Cable Specifications for Multinode Device............................................................................ 19 Table 10 – Lightning Arrestor Specifications for Integral Antenna(s) ................................................................. 19 Table 11 – Lightning Arrestor Specifications for Remote Antenna(s)................................................................. 19 Table 12 – Approved Antenna Types/Gains, DSSS, FHSS Radio ..................................................................... 20 Table 13 – Approved Antenna Types/Gains, 802.11a/b/g Radios ..................................................................... 21 Table 14 – EIRP Limits, DSSS 2.4GHz Radio .................................................................................................... 23 Table 15 - EIRP Limits, FHSS 2.4GHz Radio ..................................................................................................... 24 Table 16 – EIRP Limits, 802.11a (5.8GHz) Radios ............................................................................................ 25 Table 17 – EIRP Limits, 802.11a (5.4GHz) Radios ............................................................................................ 26 Table 18 – EIRP Limits, 802.11b/g (2.4GHz) Radios ......................................................................................... 27 Table 19: 802.11 Radio Power Setting Reference.............................................................................................. 31 FCF: OneWireless Extended Temperature Multinode Professional Installation Guide FMF: Made by: David Shipley Issue: AT8, 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 5 of 36 Honeywell Proprietary and Confidential AT8 51121312 REVISIONS DESIGNATION, SCOPE AND PREFACE 1.1 Designation HONEYWELL ONEWIRELESS MULTINODE DEVICE. 1.1.1 Model Numbers and Revisions : This document is valid for the following Multinode assembly number: MULTINODE EXTENDED TEMPERATURE Model Hardware Assembly Description Number # / Revision Multinode Extended Temperature – 802.11a/b/g and WNMF 51153884-200 / C 2.4GHz FHSS Radios WNMS 51153884-201 / C Multinode Extended Temperature – 802.11a/b/g and 2.4GHz DSSS Radios Table 1 – Assembly Number and Revision 1.2 Scope This document outlines professional installation requirements for the Honeywell Multinode Device for the Honeywell OneWireless Network. Professional installation is required to comply with certification agency and legal requirements. This document must be adhered to for all installations of the Honeywell OneWireless Multinode device. 1.3 Preface This manual covers professional installation of the optional external antennas for use with the Honeywell OneWireless Multinode device. Since this device requires manual power limit settings for use with the higher gain antennas, it is classified by the FCC as a professional install device. To be in compliance with FCC requirements, the radio must be installed with one of several approved antenna types listed in this document. The Honeywell OneWireless Multinode device works in conjunction with Honeywell XYR5000 and XYR6000 wireless sensors and Wi-Fi access point devices. See the Reference Documents section, for general information on overall system implementation, configuration, and management of the multimode. FCF: OneWireless Extended Temperature Multinode Professional Installation Guide FMF: Made by: David Shipley Issue: AT8, 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 6 of 36 Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 1.4 Abbreviations & Definitions The term Honeywell Multinode Device (or simply Multinode) will be used to describe the composite unit which includes the Honeywell DSSS or FHSS Radio Board, 3eTI Mesh Board, Power Supply board, and all subassemblies housed inside the Multinode enclosure. ACMA ATEX AWG Co-located COTS CSA DFS DSSS EMC ETSI EU FCC FHSS FM IC IEEE IR IrDA LED MPE MTBF NEMA PCB PCI RAM RJ-45 RPN SQA Wi-Fi WNSIA Australian Communications and Media Authority Potentially Explosive Atmospheres Directive American Wire Gauge Two or more radios transmitting simultaneously and with less than 20cm of separation distance. Commercial Off-The-Shelf Canadian Standards Association Dynamic Frequency Selection Direct Sequence Spread Spectrum Electromagnetic Compatibility European Telecommunications Standards Institute European Union Federal Communications Committee Frequency-Hopping Spread Spectrum Factory Mutual Industry Canada Institute of Electrical and Electronics Engineers Infrared Infrared Data Association Light Emitting Diode Maximum Permissible Exposure Mean Time Between Failures National Electrical Manufacturers Association Printed Circuit Board Peripheral Components Interconnect Random Access Memory Registered Jack-45 Reverse Polarity N-type Supplier Quality Assurance Wireless Local Area Network based on IEEE 802.11 Specifications Wireless Network for Secure Industrial Application Table 2 –Table of Abbreviations and Definitions FCF: OneWireless Extended Temperature Multinode Professional Installation Guide FMF: Made by: David Shipley Issue: AT8, 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 7 of 36 Honeywell Proprietary and Confidential AT8 51121312 REVISIONS FEDERAL COMMUNICATION COMMISSION (FCC) 2.1 FCC Compliance Statements This device complies with Part 15 of FCC Rules and Regulations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Intentional or unintentional changes or modifications must not be made to the Multinode unless under the express consent of the party responsible for compliance. Any such modifications could void the user’s authority to operate the equipment and will void the manufacturer’s warranty. INDUSTRY CANADA (IC) 3.1 IC Compliance Statements To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropic radiated power (EIRP) is not more than that permitted for successful communication. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class A digital apparatus complies with Canadian ICES-003. French: Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. FCF: OneWireless Extended Temperature Multinode Professional Installation Guide FMF: Made by: David Shipley Issue: AT8, 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 8 of 36 Honeywell Proprietary and Confidential AT8 51121312 REVISIONS RF Safety Statement: To comply with FCC’s and Industry Canada’s RF exposure requirements, the following antenna installation and device operating configurations must be satisfied. Remote Point-to-Multi-Point antenna(s) for this unit must be fixed and mounted on outdoor permanent structures with a separation distance between the antenna(s) of greater than 20cm and a separation distance of at least 20cm from all persons. Remote Fixed Point–to-Point antenna(s) for this unit must be fixed and mounted on outdoor permanent structures with a separation distance between the antenna(s) of greater than 20cm and a separation distance of at least 100cm from all persons. Furthermore, when using integral antenna(s) the Multinode unit must not be colocated with any other antenna or transmitter device and have a separation distance of at least 20cm from all persons. FCF: OneWireless Extended Temperature Multinode Professional Installation Guide FMF: Made by: David Shipley Issue: AT8, 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 9 of 36 Honeywell Proprietary and Confidential 5.1 5.2 FCF: 51121312 REVISIONS AT8 FCC and Industry Canada (IC) Identification Numbers: FCC Identification Numbers: • Honeywell Multinode DSSS Radio o Limited Modular Approval o Federal Communication Commission Identification: S57 - 51306343 • Honeywell Multinode FHSS Radio o Limited Modular Approval o Federal Communication Commission Identification: S57 - WNMNFHSS • Honeywell Extended Temperature Multinode 802.11a/b/g Radio o Limited Modular Approval o Federal Communication Commission Identification: S57 - DCMA-82 Industry Canada Identification Numbers: • Honeywell Multinode DSSS Radio o Limited Modular Approval o Industry Canada Identification: 573I - 51306343 • Honeywell Multinode FHSS Radio o Limited Modular Approval o Industry Canada Identification: 573I - WNMNFHSS • Honeywell Extended Temperature Multinode 802.11a/b/g Radio o Limited Modular Approval o Industry Canada Identification: 573I - DCMA82 OneWireless Extended Temperature Multinode Professional Installation Guide FMF: Made by: David Shipley Issue: AT8, 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 10 of 36 Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 INTENDED COUNTRY USAGE 6.1 NORTH AMERICA Country UNIIITED STATES CANADA 6.2 ISO 3166 2 letter code US CA AUSTRALIA AND NEW ZEALAND Country AUSTRALIA NEW ZEALAND 6.3 EUROPEAN UNION Country Austria Belgium Bulgaria Cyprus Czech Republic Denmark Estonia Finland France Germany Greece Hungary Iceland Ireland Italy FCF: ISO 3166 2 letter code AU NZ ISO 3166 2 letter code AT BE BG CY CZ DK EE FI FR DE GR HU IS IE IT Country Latvia Liechtenstein Lithuania Malta Netherlands Norway Poland Portugal Romania Slovakia Slovenia Spain Sweden Switzerland United Kingdom ISO 3166 2 letter code LV LI LT MT NL NO PL PT RO SK SI ES SE CH BG OneWireless Extended Temperature Multinode Professional Installation Guide FMF: Made by: David Shipley Issue: AT8, 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 11 of 36 Honeywell Proprietary and Confidential AT8 51121312 REVISIONS MULTINODE GENERAL DESCRIPTION 7.1 Intended Use The Multinode unit is a key component of the Honeywell Wireless Network for Secure Industrial Application (WNSIA). It provides wireless mesh connectivity for wireless sensor networks and wireless worker appliances. The Multinode uses powerful radios to communicate with gateway devices connected to a wired DCS network, and a low-powered radio to communicate with wireless sensors. The Multinode unit consists of two types of radios: a sensor radio for communication with XYR 6000 transmitters and IEEE 802.11a/b/g radios for mesh (bridge) network and communication with mobile access point (client) devices. 7.2 Multinode Device Diagrams Figure 1 shows the unit-level drawing of the Multinode Device. All cables exit the unit via a ¾” conduit hub. The conduit hub allows end user to land conduit on the Multinode Device. Figure 1 shows the Multinode and all of external interfaces. Figure 1 –Diagram of Multinode Unit showing various external attributes FCF: OneWireless Extended Temperature Multinode Professional Installation Guide FMF: Made by: David Shipley Issue: AT8, 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 12 of 36 Honeywell Proprietary and Confidential AT8 51121312 REVISIONS PRODUCT SPECIFICATIONS 8.1 Direct Sequence Spread Spectrum (DSSS) Radio, 2.4GHz Warning! The Multinode unit must be Professionally Installed in accordance with the requirements specified in this document. See Section 10, for professional installation maximum power setting requirements. Only the specified power settings, antenna types and gains and cable lengths (attenuation) as outlined in this document are valid for Multinode installations. Item Specification Wireless Standard Data Rates and Modulation Frequency Band Transmit Power Receive Sensitivity (typical) Direct Sequence Spread Spectrum 2.4GHz Data Rate: 250kbps Modulation: OQPSK – DSSS 2,405 – 2,475MHz Maximum: 19dBm (Maximum transmit power will vary by channel and individual country regulations. -95dBm Table 3 – Specifications of DSSS Radio in Multinode Device. FCF: OneWireless Extended Temperature Multinode Professional Installation Guide FMF: Made by: David Shipley Issue: AT8, 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 13 of 36 Honeywell Proprietary and Confidential 8.2 AT8 51121312 REVISIONS Frequency Hopping Spread Spectrum (FHSS) Radio, 2.4GHz Warning! The Multinode unit must be Professionally Installed in accordance with the requirements specified in this document. See Section 10, for professional installation maximum power setting requirements. Only the specified power settings, antenna types and gains and cable lengths (attenuation) as outlined in this document are valid for Multinode installations. Item Specification Wireless Standard Data Rates and Modulation Frequency Band Transmit Power Receive Sensitivity (typical) Frequency Hopping Spread Spectrum (FHSS), 2.4GHz Data Rate: 250kbps Modulation: Gaussian Frequency Shift Keying (GFSK) 2,402 – 2,482MHz Maximum: 19dBm (Maximum transmit power will vary by channel and individual country regulations. -98dBm Table 4 – Specifications of FHSS Radio in Multinode Device. FCF: OneWireless Extended Temperature Multinode Professional Installation Guide FMF: Made by: David Shipley Issue: AT8, 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 14 of 36 Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 8.3 IEEE 802.11a/b/G (Wi-Fi) Radios The Multinode has two IEEE 802.11 radios for implementing client (access point) and mesh (bridge) networks. Warning! The Multinode unit must be Professionally Installed in accordance with the requirements specified in this document. See Section 11, for professional installation maximum power setting requirements. Only the specified power settings, antenna types and gains and cable lengths (attenuation) as outlined in this document are valid for Multinode installations. Item Wireless Standards Specification IEEE 802.11a/b/g • 802.11a: 54, 48, 36, 18, 12, 9, 6 Mbps • 802.11b: 11, 5.5, 2, 1 Mbps • 802.11g: 54, 48, 36, 18, 12, 9, 6 Mbps Data Rates Modulation Technique 802.11 a/b/g: DSSS (DBPSK, DQPSK, CCK), OFDM (BPSK,QPSK, 16-QAM, 64-QAM) Frequency Bands and Operating Channels United States and Canada (FCC and IC): • 802.11b/g: 2,412 – 2,462MHz, Channels 1 – 11 • 802.11a: 5,745 – 5,825, Channels 149,153,157,161,165 Europe (ETSI): • 802.11b/g: 2,412 – 2,472MHz, Channels 1 – 13 • 802.11a: 5,500 – 5,700, Channels 100,104,108,112,116,120,124,128,132,136,140 Australia (ACMA): • 802.11b/g: 2,412 – 2,472MHz, Channels 1 – 13 • 802.11a: 5,745 – 5,825, Channels 149,153,157,161,165 Output Power (maximum) 802.11a: +22.5dBm at 6, 9, 12, 18Mbps +21.5dBm at 36Mbps +19dBm at 48Mbps +18dBm at 54Mbps Receive sensitivity (typical) 802.11a: 802.11b: +24.5dBm at 1,2, 5.5, and 11Mbps 802.11g: +24.5dBm at 6, 9, 12, 18Mbps +23.5dBm at 36Mbps +22dBm at 48Mbps +21dBm at 54Mbps -91dB@6Mbps, -90dB@9Mbps, -90@12Mbps, -88dB@18Mbps, -85dB@24Mbps, -82dB@36Mbps, -76dB@48Mbps, -72dB@54Mbps 802.11b: -97dB@1Mbps, -93dB@2Mbps, -92dB@5.5Mbps, -88dB@11Mbps 802.11g: -91dB@6Mbps, -90dB@9Mbps, -89@12Mbps, -87dB@18Mbps, -84dB@24Mbps, -80dB@36Mbps, -76dB@48Mbps, -74dB@54Mbps Table 5 – IEEE 802.11a/b/g Wi-Fi Radio Specifications. FCF: OneWireless Extended Temperature Multinode Professional Installation Guide FMF: Made by: David Shipley Issue: AT8, 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 15 of 36 Honeywell Proprietary and Confidential 8.4 51121312 REVISIONS AT8 Multinode User Environment Item Specification Operating Temperature: Storage Temperature: Operating Humidity: -40 OC to +75 OC -40 OC to +75 OC 0 to 100% RH Table 6 – Specifications User Environment Multinode Device. 8.5 Multinode Power Specifications Item Operating Voltage: Power Consumption (typical): Specification 20.4Vdc to 26.4Vdc 25W Table 7 – Power Specifications Multinode Device. 8.6 Weight The weight of the complete Multinode units shall be 7.0 lb. (3.2 kg) maximum. This weight does not include the integral antennas or other external accessories. FCF: OneWireless Extended Temperature Multinode Professional Installation Guide FMF: Made by: David Shipley Issue: AT8, 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 16 of 36 Honeywell Proprietary and Confidential 8.7 AT8 51121312 REVISIONS Dimensions Figure 2 – Dimension of the Multinode Device FCF: OneWireless Extended Temperature Multinode Professional Installation Guide FMF: Made by: David Shipley Issue: AT8, 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 17 of 36 Honeywell Proprietary and Confidential AT8 51121312 REVISIONS Cables 9.1 External Interface Cables Cable Type Specification External CAT5E Ethernet Stranded Core 24VDC Power Ground Conductor Note: • • • Multiconductor, AWG AWG10 Qty Comments/Specification Routed through conduit hub. Termination = RJ-45 Modular Plug Finished Length = 24 inches Finished Length = 24 inches Routed through conduit hub Conductor Color: Red & Green = 24VDC White & Black = Common Drain wire = Chassis potential Routed through conduit hub Color = Green or Green with yellow stripes. Finished length = 24 inches Finished length is measured from conduit hub to outside tip of cable. Ground conductor must be attached to product safety protective earth and building steel ground. All external wiring must be routed through metal conduit. Table 8 – External Cable Specification for Multinode Device. FCF: OneWireless Multinode Agency Compliance Professional Installation Guide FMF: Made by: David Shipley Issue: AT8 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 18 of 36 Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 9.2 Antenna Cables Cable Honeywell Application Part # DSSS, FHSS, 50018278-001 802.11 DSSS, FHSS, 50018278-003 802.11 DSSS, FHSS, 50018278-010 802.11 Cable Type 400 Series 400 Series 400 Series Connector Type NM – NM Frequency Length (GHz) (m) 2.4/5.8 Loss (dB) 1.0 / 2.0 NM – NM 2.4/5.8 1.5 / 2.5 NM – NM 2.4/5.8 10 2.5 / 3.5 Table 9 - Antenna Cable Specifications for Multinode Device. 10 Antenna Lightning Arrestors 10.1 For use with Integral or Remote Antenna(s) Application Honeywell Specification Connector Part Number Type DSSS, FHSS, 51202359-200 50 ohm NM - NF 802.11 Frequency Attenuation (GHz) (dB) 0–6 0.4 (max) Table 10 – Lightning Arrestor Specifications for Integral Antenna(s) 10.2 For use with Remote Antenna(s) Application Honeywell Specification Part Number DSSS, FHSS, 50018279-090 50 ohm 802.11 Connector Type NF to NF Frequency Attenuation (GHz) (dB) 0–3 0.4 (max) NOTE: Depending on application needs, the “integral” arrestors may be used for remote antennas. Table 11 – Lightning Arrestor Specifications for Remote Antenna(s) FCF: OneWireless Multinode Agency Compliance Professional Installation Guide FMF: Made by: David Shipley Issue: AT8 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 19 of 36 Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 11 Approved Antenna Types/Gains 11.1 DSSS, FHSS 2.4GHz Radio: Antenna Type Antenna Application Omni (integral) Omni (integral) Omni (integral) Omni (remote) Sector (remote) Point to Multi-Point Point to Multi-Point Point to Multi-Point Point to Multi-Point Point to Multi-Point Manufacturer Manufacturer Part Number PacWireless OD24M-5 SMARTANT SMARTANT SAA04051000 HON04052160 HYPERLINK HGV-2409U HYPERLINK HG2414SP120 Honeywell Part Number 51506534101 51506534101 51506534100 50018414001 NA Beam Width Peak Gain (dBi) Freq. (GHz) Omni 2.4 Omni 2.4 Omni 2.4 Omni 2.4 120° 14 2.4 Agency Compliance FCC, IC, ETSI, ACMA FCC, IC, ETSI, ACMA FCC, IC, ETSI, ACMA FCC, IC, ETSI, ACMA FCC, IC, ETSI, ACMA Table 12 – Approved Antenna Types/Gains, DSSS, FHSS Radio FCF: OneWireless Multinode Agency Compliance Professional Installation Guide FMF: Made by: David Shipley Issue: AT8 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 20 of 36 Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 11.2 802.11a/b/g Access point and Bridge (Mesh) Radio Antenna Type Antenna Application Manufacturer Manufacturer Part Number Honeywell Part Number Beam Width Peak Gain (dBi) 3.5 Omni (integral) Point to MultiPoint Air802 ANOM245XM 51506534 -200 Omni 5.3 4.0 Omni (integral) Omni (remote) Omni (remote) Omni (remote) Sector (remote) Sector (remote) Sector (remote) YAGI (remote) DISH (remote) DISH (remote) Point to MultiPoint Point to MultiPoint Point to MultiPoint Point to MultiPoint Point to MultiPoint Point to MultiPoint Point to MultiPoint Point to MultiPoint Fixed Point to Point Fixed Point to Point SMARTANT SAA05-220920 51506534 -200 Omni 7.0 HYPERLINK HGV-2409U 50018414001 Omni HYPERLINK HG5412U NA Omni 12 HYPERLINK HG5812U-PRO NA Omni 12 HYPERLINK HG2414SP-120 NA 120° 14 HYPERLINK HG5417P-090 NA 90° 17 HYPERLINK HG5817P-090 NA 90° 17 TELEX 5816AB NA 19° 16.5 HYPERLINK HG5423D NA 9° 23 HYPERLINK HG5824D NA 9° 24 Freq (GHz) Agency Compliance 2.4 802.11b/g FCC, IC, ETSI, ACMA 5.4 802.11a ETSI 5.8 802.11a 2.4 802.11b/g FCC, IC, ACMA FCC, IC, ETSI, ACMA 5.4 802.11a ETSI 5.8 802.11a 2.4 802.11b/g 5.4 802.11a 5.8 802.11a 2.4 802.11b/g 5.4 802.11a 5.8 802.11a 5.8 802.11a 5.4 802.11a 5.8 802.11a FCC, IC, ACMA FCC, IC, ETSI, ACMA ETSI FCC, IC, ACMA FCC, IC, ETSI, ACMA ETSI FCC, IC, ACMA FCC, IC, ACMA ETSI FCC, IC, ACMA Table 13 – Approved Antenna Types/Gains, 802.11a/b/g Radios FCF: OneWireless Multinode Agency Compliance Professional Installation Guide FMF: Made by: David Shipley Issue: AT8 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 21 of 36 Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 12 Equivalent Isotropically Radiated Power (EIRP) In radio communication systems, Equivalent isotropically radiated power (EIRP), or alternatively, Effective isotropic radiated power is the amount of power that would have to be emitted by an isotropic antenna (that evenly distributes power in all directions and is a theoretical construct) to produce the peak power density observed in the direction of maximum antenna gain. EIRP can take into account the losses in transmission line and connectors and includes the gain of the antenna. The EIRP is often stated in terms of decibels over a reference power level, that would be the power emitted by an isotropic radiator with an equivalent signal strength. The EIRP allows making comparisons between different emitters regardless of type, size or form. From the EIRP, and with knowledge of a real antenna's gain, it is possible to calculate real power and field strength values. EIRP(dBm) = (Radio Power (dBm)) – (Cable Loss (dB)) + (Antenna Gain(dBi)) Antenna gain is expressed relative to a (theoretical) isotropic reference antenna (dBi). FCF: OneWireless Multinode Agency Compliance Professional Installation Guide FMF: Made by: David Shipley Issue: AT8 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 22 of 36 Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 13 EIRP LIMITS, DSSS 2.4GHz RADIO Antenna Type Omni Omni Sector Freq. (GHz) Max. Ant. Gain (dBi) Min. Cable Length (m) Min. Cable Loss (dB) Integral 2.4 Remote 2.4 1.0 Remote 2.4 14 1.0 Radio Usage / Application Point to MultiPoint Point to MultiPoint Point to MultiPoint Max. Radio Output Power (dBm) Max. EIRP (dBm) Agency/ Country 20 25 FCC, IC 11 ETSI 5, ACMA 19 26 FCC, IC 12 ETSI 5, ACMA 15 28 FCC, IC 13 ETSI 5, ACMA Notes: 1. The values in the above table have been determined through agency certification testing. 2. Maximum transmit power will vary by channel, data rate, and individual country regulations. 3. The following shall apply for antenna type, frequency range, application/usage and agency/country compliance: • Antenna gains above the maximum values shown shall not be used. • Cable length/loss below the minimum values shown shall not be used. • Maximum overall radio output power shown shall not be exceeded. • Maximum EIRP values shown above shall not be exceeded. 4. Beam width, for sector and dish antenna, may range between 0 – 180degress. 5. France restricts outdoor use to 10mW (10dBm) EIRP in the frequency range of 2,454-2,483.5 MHz. Installations in France must limit EIRP to 10dBm, for operating modes utilizing frequencies in the range of 2,454 – 2,483.5MHz. 6. Industry Canada Compliance Statement: This device has been designed to operate with the antenna types listed in this document, and having a maximum gain of 14dBi. Antenna types not included in this list or having a gain greater than 14dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. Table 14 – EIRP Limits, DSSS 2.4GHz Radio FCF: OneWireless Multinode Agency Compliance Professional Installation Guide FMF: Made by: David Shipley Issue: AT8 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 23 of 36 Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 14 EIRP LIMITS, FHSS 2.4GHz RADIO Antenna Type Omni Omni Sector Freq. (GHz) Max. Ant. Gain (dBi) Min. Cable Length (m) Min. Cable Loss (dB) Integral 2.4 Remote 2.4 1.0 Remote 2.4 14 1.0 Radio Usage / Application Point to MultiPoint Point to MultiPoint Point to MultiPoint Max. Radio Output Power (dBm) Max. EIRP (dBm) Agency/ Country 19 24 FCC, IC 14 19 ETSI 5, ACMA 17 24 FCC, IC 12 19 ETSI 5, ACMA 12 25 FCC, IC 19 ETSI 5, ACMA Notes: 7. The values in the above table have been determined through agency certification testing. 8. Maximum transmit power will vary by channel, data rate, and individual country regulations. 9. The following shall apply for antenna type, frequency range, application/usage and agency/country compliance: • Antenna gains above the maximum values shown shall not be used. • Cable length/loss below the minimum values shown shall not be used. • Maximum overall radio output power shown shall not be exceeded. • Maximum EIRP values shown above shall not be exceeded. 10. Beam width, for sector and dish antenna, may range between 0 – 180degress. 11. France restricts outdoor use to 10mW (10dBm) EIRP in the frequency range of 2,454-2,483.5 MHz. Installations in France must limit EIRP to 10dBm, for operating modes utilizing frequencies in the range of 2,454 – 2,483.5MHz. 12. Industry Canada Compliance Statement: This device has been designed to operate with the antenna types listed in this document, and having a maximum gain of 14dBi. Antenna types not included in this list or having a gain greater than 14dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. Table 15 - EIRP Limits, FHSS 2.4GHz Radio FCF: OneWireless Multinode Agency Compliance Professional Installation Guide FMF: Made by: David Shipley Issue: AT8 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 24 of 36 Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 15 EIRP LIMITS, 802.11a (5.8GHz) Access Point and Bridge Radio Ant. Type Radio Usage / Application Freq. (GHz) Max. Ant. Gain (dBi) Min. Cable Length (m) Min. Cable Loss (dB) Omni Point to Multi-Point Integral 5.8 802.11a 7.0 Omni Point to Multi-Point Remote 5.8 802.11a 12 Sector Point to Multi-Point Remote 5.8 802.11a 17 Yagi Point to Multi-Point Remote 5.8 802.11a 16.5 Dish Fixed Pt. to Pt. Remote 5.8 802.11a 24 Max. Radio Output Power (dBm) Max. EIRP (dBm) ProInstall Power Setting Agency/ Country 26 23 24 20 19 15 19 15.5 27 33 30 34 30 34 30 34 30 49 30 10 -5 -3 -11 -15 -22 -15 -22 40 -37 FCC, IC ACMA FCC, IC ACMA FCC, IC ACMA FCC, IC ACMA FCC, IC ACMA Notes: 1. The values in the above table have been determined through agency certification testing. 2. Maximum transmit power will vary by channel, data rate, and individual country regulations. 3. The following shall apply for antenna type, frequency range, application/usage and agency/country compliance: • Antenna gains above the maximum values shown shall not be used. • Cable length/loss below the minimum values shown shall not be used. • Maximum overall radio output power shown shall not be exceeded. • Maximum EIRP values shown above shall not be exceeded. 4. Beam width, for sector and dish antenna, may range between 0 – 180degress. 5. Industry Canada Compliance Statement: This device has been designed to operate with the antenna types listed in this document, and having a maximum gain of 24dBi. Antenna types not included in this list or having a gain greater than 24dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. Table 16 – EIRP Limits, 802.11a (5.8GHz) Radios FCF: OneWireless Multinode Agency Compliance Professional Installation Guide FMF: Made by: David Shipley Issue: AT8 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 25 of 36 Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 16 EIRP LIMITS, 802.11a (5.4GHz) Access Point and Bridge Radio Ant. Type Radio Usage / Application Freq. (GHz) Max. Ant. Gain (dBi) Min. Cable Length (m) Min. Cable Loss (dB) Max. Radio Output Power (dBm) Max. EIRP (dBm) ProInstall Power Setting Agency/ Country Omni Point to Multi-Point Integral 5.4 802.11a 7.0 21 28 -14 ETSI Omni Point to Multi-Point Remote 5.4 802.11a 12 18 28 -10 ETSI Sector Point to Multi-Point Remote 5.4 802.11a 17 13 28 -22 ETSI Dish Fixed Pt. to Pt. Remote 5.4 802.11a 23 10 3.8 26 -33 ETSI Notes: 1. The values in the above table have been determined through agency certification testing. 2. Maximum transmit power will vary by channel, data rate, and individual country regulations. 3. The following shall apply for antenna type, frequency range, application/usage and agency/country compliance: • Antenna gains above the maximum values shown shall not be used. • Cable length/loss below the minimum values shown shall not be used. • Maximum overall radio output power shown shall not be exceeded. • Maximum EIRP values shown above shall not be exceeded. 4. Beam width, for sector and dish antenna, may range between 0 – 180degress. 5. Industry Canada Compliance Statement: This device has been designed to operate with the antenna types listed in this document, and having a maximum gain of 23dBi. Antenna types not included in this list or having a gain greater than 23dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. 6. A 10 meter cable must be used with the 23dBi Dish antenna, in order to comply with ETSI Transmit Power Control (TPC) requirements. Table 17 – EIRP Limits, 802.11a (5.4GHz) Radios FCF: OneWireless Multinode Agency Compliance Professional Installation Guide FMF: Made by: David Shipley Issue: AT8 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 26 of 36 Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 17 EIRP LIMITS, 802.11b/g (2.4GHz) Access Point and Bridge Radio Ant. Type Radio Usage / Application Freq. (GHz) Max. Ant. Gain (dBi) Min. Cable Length (m) Min. Cable Loss (dB) Omni Point to Multi-Point Integral 2.4 802.11b/g 4.0 Omni Point to Multi-Point Remote 2.4 802.11b/g Sector Point to Multi-Point Remote 2.4 802.11b/g 14 Max. Radio Output Power (dBm) Max. EIRP (dBm) ProInstall Power Setting Agency/ Country 22 13 21 11 20 26 17 28 18 33 18 -8 -15 -10 -22 -12 -27 FCC, IC ETSI 5, ACMA FCC, IC ETSI 5, ACMA FCC, IC ETSI 5, ACMA Notes: 1. The values in the above table have been determined through agency certification testing. 2. Maximum transmit power will vary by channel, data rate, and individual country regulations. 3. The following shall apply for antenna type, frequency range, application/usage and agency/country compliance: • Antenna gains above the maximum values shown shall not be used. • Cable length/loss below the minimum values shown shall not be used. • Maximum overall radio output power shown shall not be exceeded. • Maximum EIRP values shown above shall not be exceeded. 4. Beam width, for sector and dish antenna, may range between 0 – 180degress. 5. France restricts outdoor use to 10mW (10dBm) EIRP in the frequency range of 2,454-2,483.5 MHz. Installations in France must limit EIRP to 10dBm, for operating modes utilizing frequencies in the range of 2,454 – 2,483.5MHz. 6. Industry Canada Compliance Statement: This device has been designed to operate with the antenna types listed in this document, and having a maximum gain of 14dBi. Antenna types not included in this list or having a gain greater than 14dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. Table 18 – EIRP Limits, 802.11b/g (2.4GHz) Radios FCF: OneWireless Multinode Agency Compliance Professional Installation Guide FMF: Made by: David Shipley Issue: AT8 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 27 of 36 Honeywell Proprietary and Confidential AT8 51121312 REVISIONS 18 Setting Power and Country Code: DSSS-FH Radio Warning! The Multinode unit must be Professionally Installed in accordance with the requirements specified in this document. Only the specified power settings, antenna types and gains and cable lengths (attenuation) as outlined in this document are valid for Multinode installations. Set the radio power level using the Authentication Device application. Due to regulations, this command is only available if professional installer options have explicitly been enabled on your PDA. If you have not enabled professional installer options and would like to do so, please contact Honeywell Design Engineering or Technical Assistance Center. A separate application, AuthDev Power Settings, is required to enable the "Write TX Power Level" option. Perform the following procedure to read and change the radio power level on your multinode or wireless device: • Open the Authentication Device application on your Windows Mobile PDA. • From the main menu, choose the Advanced Options menu to open the Advanced Options form. • From the Advanced Options form, choose "Read TX Power Level" from the command drop down box. • Aim the Authentication Device at your node and press the Transmit Command button to read the data from the node. The TX Power reading will be presented on your screen. • If you have enabled professional installer options within the Authentication Device, choose the "Write TX Power Level" from the command drop down box. • Choose a new power level. Aim the Authentication Device at your node and press the Transmit Command button to write the data to the node. FCF: OneWireless Multinode Agency Compliance Professional Installation Guide FMF: Made by: David Shipley Issue: AT8 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 28 of 36 Honeywell Proprietary and Confidential AT8 51121312 REVISIONS 19 Setting Power & Country Code: 802.11 Access Point & Bridge Radio Warning! The Multinode unit must be Professionally Installed in accordance with the requirements specified in this document. Only the specified power settings, antenna types and gains and cable lengths (attenuation) as outlined in this document are valid for Multinode installations. Programming the Country Code A hidden page on the Multinode Configuration Tool has been designed for professional installers to change country code and radio output power settings. A valid authorization code has to be entered for the any information to be modified. This authorization code is hardcoded in the firmware and shall be kept as a SECRET at all times. To access the hidden page, type the following URL in your browser: https://192.168.254.128/cgi-bin/sgateway?PG=911 Change 192.168.254.128 to the IP address of your unit, and make sure you login as: Login: CryptoOfficer, Password: CryptoFIPS You should see something like this: FCF: OneWireless Multinode Agency Compliance Professional Installation Guide FMF: Made by: David Shipley Issue: AT8 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 29 of 36 Honeywell Proprietary and Confidential AT8 51121312 REVISIONS The authorization code is: “Raptor2007!” without the quote (YOU MUST KEEP THIS AS A SECRET) Change the following options based on values you determined in Section 11: Country Code Adjustment to Max TX power of Access Point Radio (increase or decrease) Adjustment to Max TX power of Bridge Radio (increase or decrease) After applying the changes, you will be notified to reboot the unit for any changes to take effect. Note that the adjustment of radio Max TX power has limits. It will level off on both the low end and high end. This feature is provided for professional installers to adjust the card output power to match the specific selection of antenna and keep the total output power under the regulatory threshold. The setting here are saved in non-volatile memory inside the unit. Restoring the unit to factory default settings does not change these values. FCF: OneWireless Multinode Agency Compliance Professional Installation Guide FMF: Made by: David Shipley Issue: AT8 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 30 of 36 Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 19.1 Power Setting Reference Table, 802.11 Access Point & Bridge Radio: Multinode Bridge and Access Point Radio Ports WIRELESS MODE 802.11a 802.11a 802.11b/g mixed 802.11b/g mixed CHANNEL TX PWR MODE Data Rate 120 (5.6GHz) FIXED, 8 157 (5.785GHz) FIXED, 8 7 (2.442GHz) FIXED, 8 6 (2.437GHz) FIXED, 8 MEASURED OUTPUT POWER (dBm) 25 25 24 24 22 18 14 MEASURED OUTPUT POWER (dBm) 27 27 27 26 24 21 16 12 MEASURED OUTPUT POWER (dBm) 26 26 26 25 21 15 10 MEASURED OUTPUT POWER (dBm) 26 26 26 26 25 21 15 10 Professional Installer TX Power Setting 40 30 20 10 -10 -20 -30 -40 Table 19: 802.11 Radio Power Setting Reference FCF: OneWireless Multinode Agency Compliance Professional Installation Guide FMF: Made by: David Shipley Issue: AT8 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 31 of 36 Honeywell Proprietary and Confidential AT8 51121312 REVISIONS 20 RF Safety, Maximum Permissible Exposure (MPE) statement To comply with FCC’s and Industry Canada’s RF exposure requirements, the following antenna installation and device operating configurations must be satisfied. Remote Point-to-Multi-Point antenna(s) for this unit must be fixed and mounted on outdoor permanent structures with a separation distance between the antenna(s) of greater than 20cm and a separation distance of at least 20cm from all persons. Remote Fixed Point–to-Point antenna(s) for this unit must be fixed and mounted on outdoor permanent structures with a separation distance between the antenna(s) of greater than 20cm and a separation distance of at least 100cm from all persons. Furthermore, when using integral antenna(s) the Multinode unit must not be co-located with any other antenna or transmitter device and have a separation distance of at least 20cm from all persons. FCF: OneWireless Multinode Agency Compliance Professional Installation Guide FMF: Made by: David Shipley Issue: AT8 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 32 of 36 Honeywell Proprietary and Confidential 51121312 REVISIONS AT8 21 AGENCY COMPLIANCE 21.1 Radio and EMC Certifications 21.1.1 Federal Communication Commission (FCC) Specification: FCC Part 15.247 Subpart B for unintentional radiators Specification: FCC Part 15.247 Subpart C for intentional radiators 21.1.2 Industry Canada (IC) Method: RSS-210, Issue 7 RSS-Gen, Issue 2 ICES-003, Issue 4 21.1.3 European Telecommunications Standards Institue (ETSI) Emissions Specification and Method: EN 300 328 V1.7.1 Emissions Spec and Method: EN 301 893 V1.4.1 Immunity Specification: EN 301 489-17 V1.2.1 Immunity Method: EN 301 489-1 V1.6.1 Product Standard: IEC61326-1 (1st Edition, 2005, Industrial Locations) 21.1.4 Australian communications and media authority (ACMA) Specification: AS NZS 4771-2000 FCF: OneWireless Multinode Agency Compliance Professional Installation Guide FMF: Made by: David Shipley Issue: AT8 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 33 of 36 Honeywell Proprietary and Confidential AT8 51121312 REVISIONS 21.2 Product Safety Agency Certifications 21.2.1 Canadian Standards Association (CSA) CSA electrical equipment requirements for use within Division 2 and Zone 2 hazardous locations. IEC61010-1 (2nd Edition, 2001-02), "Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use, part 1: General Requirements Canadian Standards Association Standard C22.2 No. 213-M1987, "Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations" Canadian Standards Association Standard E60079-0:02, “Electrical Apparatus for explosive gas atmospheres – General Requirements” Canadian Standards Association Standard E60079-15:02, “Electrical Apparatus for explosive gas atmospheres – Type of Protection “n”” • FCF: Temperature code: T4 (135°C) based on the maximum specified ambient of 60°C. OneWireless Multinode Agency Compliance Professional Installation Guide FMF: Made by: David Shipley Issue: AT8 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 34 of 36 Honeywell Proprietary and Confidential AT8 51121312 REVISIONS 21.2.2 Factory Mutual (FM) FM electrical equipment requirements for use within Division 2 and Zone 2 hazardous locations. Factory Mutual Approval Standard Class No. 3600, "Electrical Equipment for Use in Hazardous (Classified) Locations - General Requirements Factory Mutual Approval Standard Class No. 3810, "Electrical and Electronic Test, Measuring, and Process Control Equipment Factory Mutual Approval Standard Class No. 3611, "Electrical Equipment for Use in Class I, Division 2, Class II, Division 2 and Class III, Division 1 and 2 Hazardous (Classified) Locations ANSI/ISA 12.00.01-2002, “Electrical Apparatus for Use in Class I, Zones 0, 1 & 2 Hazardous (Classified) Locations: General Requirements” ANSI/ISA 12.12.02-2003, “Electrical Apparatus for explosive gas atmospheres – Type of Protection “n”” • FCF: Temperature code: T4 (135°C) based on the maximum specified ambient of 60°C. OneWireless Multinode Agency Compliance Professional Installation Guide FMF: Made by: David Shipley Issue: AT8 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 35 of 36 Honeywell Proprietary and Confidential AT8 51121312 REVISIONS 21.2.3 European ATEX Certification (ATEX) The completely assembled Multinode will conform to European electrical equipment requirements for use within Zone 2 Hazardous Locations. IEC 60079-0:2004-01, “Electrical Apparatus for explosive gas atmospheres – General Requirements IEC 60079-15:2005-03, “Electrical Apparatus for explosive gas atmospheres – Type of Protection “n” • Temperature code: T4 (135°C) based on the maximum specified ambient of 60°C. 21.3 European Union Certification (CE-mark) • Compliance with: o R&TTE Directive 1999/5/EC o EMC Directive 2004/108/EC o LVD Directive 73/23/EEC o ATEX Directive 94/9/EC 22 Reference Documents Getting Started with Honeywell OneWireless Honeywell OneWireless Planning Guide Honeywell OneWireless Multinode User’s Guide Radio Antenna: A Primer White Paper Honeywell OneWireless System Administration Guide Honeywell OneWireless Field Network Dictionary OneWireless Builder Parameter Reference OneWireless Builder User’s Guide FCF: OneWireless Multinode Agency Compliance Professional Installation Guide FMF: Made by: David Shipley Issue: AT8 29-JUL-2008 Approval Prints to Honeywell IACD/Ft.W 51121312 SIZE Sh. No.: 36 of 36
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2008:09:04 12:48:50-07:00 Modify Date : 2008:09:04 12:48:50-07:00 Page Count : 36 Creation Date : 2008:09:04 19:48:50Z Mod Date : 2008:09:04 19:48:50Z Producer : Acrobat Distiller 5.0.5 (Windows) Metadata Date : 2008:09:04 19:48:50ZEXIF Metadata provided by EXIF.tools