Honeywell 51306343 51306343 User Manual Standard Temp Pro Install Guide

Honeywell International Inc. 51306343 Standard Temp Pro Install Guide

Contents

Standard Temp Pro Install Guide

Honeywell Proprietary B 51121307 and Confidential REVISIONS FCF: OneWireless Standard Temperature Multinode Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: B 9/4/2008 SIZE Sh. No.: 1 of 35 OneWireless Standard Temperature Multinode Professional Installation Guide Honeywell Industrial Automation and Control Ft. Washington, Pennsylvania NOTICE – HONEYWELL INTERNATIONAL, INCORPORATED TRADE SECRET - PROPRIETARY Proprietary Notice: This document and the information contained herein are confidential to, and the property of Honeywell, Inc. This document and the information contained herein is made available only to employees of Honeywell, for the sole purpose of conducting Honeywell's business. This document, and the information contained herein, shall be maintained in strictest confidence; shall not be copied in whole or in part; and shall not be disclosed or distributed to persons who are not employees of Honeywell, and for whom such information is not necessary in connection with their assigned responsibilities. Upon request, or when the employee in possession of this document no longer has need for this document for the authorized Honeywell purpose, this document shall be returned to the employee's manager. There shall be no exceptions to the terms and conditions set forth herein except as authorized in writing by the responsible Honeywell Vice President. RELEASED
Honeywell Proprietary B 51121307 and Confidential REVISIONS FCF: OneWireless Standard Temperature Multinode Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: B 9/4/2008 SIZE Sh. No.: 2 of 35 APPROVAL SIGNATURES _________________________________________________________________ Soroush Amidi, Product Marketing Date _________________________________________________________________ William Osei-Bonsu, Hardware Engineering Date _________________________________________________________________ David Shipley, Agency Compliance Date Revision Record Revision Date Purpose/Distribution AT5 07/18/2007 Draft for Peer Review and signature sign off A 07/26/2007 Updated CSA Hazloc information and label Initial Release B 6/18/2008 Updated for R110
Honeywell Proprietary B 51121307 and Confidential REVISIONS FCF: OneWireless Standard Temperature Multinode Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: B 9/4/2008 SIZE Sh. No.: 3 of 35 TABLE OF CONTENTS 1 DESIGNATION, SCOPE AND PREFACE...........................................................................................6 1.1 DESIGNATION .....................................................................................................................................6 1.1.1 Model Numbers and Revisions :..................................................................................................6 1.2 SCOPE ...............................................................................................................................................6 1.3 PREFACE ...........................................................................................................................................6 1.4 ABBREVIATIONS & DEFINITIONS...........................................................................................................7 2 FEDERAL COMMUNICATION COMMISSION (FCC) ........................................................................8 2.1 FCC COMPLIANCE STATEMENTS.........................................................................................................8 3 INDUSTRY CANADA (IC)....................................................................................................................8 3.1 IC COMPLIANCE STATEMENTS.............................................................................................................8 4 RF SAFETY STATEMENT: .................................................................................................................9 5 FCC AND INDUSTRY CANADA (IC) IDENTIFICATION NUMBERS:..............................................10 5.1 FCC IDENTIFICATION NUMBERS: .......................................................................................................10 5.2 INDUSTRY CANADA IDENTIFICATION NUMBERS: ..................................................................................10 6 INTENDED COUNTRY USAGE ........................................................................................................11 6.1 NORTH AMERICA .........................................................................................................................11 6.2 AUSTRALIA AND NEW ZEALAND................................................................................................11 6.3 EUROPEAN UNION.......................................................................................................................11 7 MULTINODE GENERAL DESCRIPTION..........................................................................................12 7.1 INTENDED USE .................................................................................................................................12 7.2 MULTINODE DEVICE DIAGRAMS .........................................................................................................12 8 PRODUCT SPECIFICATIONS...........................................................................................................13 8.1 FREQUENCY HOPPING SPREAD SPECTRUM (DSSS) RADIO, 2.4GHZ..................................................13 8.2 FREQUENCY HOPPING SPREAD SPECTRUM (FHSS) RADIO, 2.4GHZ..................................................14 8.3 IEEE 802.11A/B/G (WI-FI) RADIOS ..................................................................................................15 8.4 MULTINODE USER ENVIRONMENT......................................................................................................16 8.5 MULTINODE POWER SPECIFICATIONS ................................................................................................16 8.6 WEIGHT ...........................................................................................................................................16 8.7 DIMENSIONS.....................................................................................................................................17 9 CABLES.............................................................................................................................................18 9.1 EXTERNAL INTERFACE CABLES..........................................................................................................18 9.2 ANTENNA CABLES.............................................................................................................................19 10 ANTENNA LIGHTNING ARRESTORS .............................................................................................19 10.1 FOR USE WITH INTEGRAL ANTENNA(S) ...............................................................................................19 10.2 FOR USE WITH REMOTE ANTENNA(S).................................................................................................19
Honeywell Proprietary B 51121307 and Confidential REVISIONS FCF: OneWireless Standard Temperature Multinode Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: B 9/4/2008 SIZE Sh. No.: 4 of 35 11 APPROVED ANTENNA TYPES/GAINS ...........................................................................................20 11.1 DSSS, FHSS 2.4GHZ RADIO: .........................................................................................................20 11.2 802.11A/B/G ACCESS POINT AND BRIDGE (MESH) RADIO ...................................................................21 12 EQUIVALENT ISOTROPICALLY RADIATED POWER (EIRP)........................................................22 13 EIRP LIMITS, DSSS 2.4GHZ RADIO ................................................................................................23 14 EIRP LIMITS, FHSS 2.4GHZ RADIO.................................................................................................24 15 EIRP LIMITS, 802.11A (5.8GHZ) ACCESS POINT AND BRIDGE RADIO......................................25 16 EIRP LIMITS, 802.11A (5.4GHZ) ACCESS POINT AND BRIDGE RADIO......................................26 17 EIRP LIMITS, 802.11B/G (2.4GHZ) ACCESS POINT AND BRIDGE RADIO..................................27 18 SETTING POWER AND COUNTRY CODE: FHSS RADIO..............................................................28 19 SETTING POWER & COUNTRY CODE: 802.11 ACCESS POINT & BRIDGE RADIO ..................29 19.1 POWER SETTING REFERENCE TABLE, 802.11 ACCESS POINT & BRIDGE RADIO:.................................31 20 RF SAFETY, MAXIMUM PERMISSIBLE EXPOSURE (MPE) STATEMENT...................................32 21 AGENCY COMPLIANCE...................................................................................................................33 21.1 RADIO AND EMC CERTIFICATIONS ....................................................................................................33 21.1.1 Federal Communication Commission (FCC).........................................................................33 21.1.2 Industry Canada (IC) .............................................................................................................33 21.1.3 European Telecommunications Standards Institue (ETSI) ...................................................33 21.1.4 Australian communications and media authority (ACMA).....................................................33 21.2 PRODUCT SAFETY AGENCY CERTIFICATIONS .....................................................................................34 21.2.1 Canadian Standards Association (CSA) ...............................................................................34 21.2.2 Factory Mutual (FM) ..............................................................................................................34 21.2.3 European ATEX Certification (ATEX)....................................................................................35 21.3 EUROPEAN UNION CERTIFICATION (CE-MARK)...................................................................................35 22 REFERENCE DOCUMENTS .............................................................................................................35
Honeywell Proprietary B 51121307 and Confidential REVISIONS FCF: OneWireless Standard Temperature Multinode Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: B 9/4/2008 SIZE Sh. No.: 5 of 35 LIST OF FIGURES Figure 1 – Diagram of Multinode Unit showing various external attributes____________________________12 Figure 2 – Dimension of the Multinode Device _________________________________________________17 LIST OF TABLES Table 1 – Assembly Number and Revision...........................................................................................................6 Table 2 –Table of Abbreviations and Definitions ..................................................................................................7 Table 3 – Specifications of DSSS Radio in Multinode Device............................................................................13 Table 4– Specifications of FHSS Radio in Multinode Device. ............................................................................14 Table 5 - IEEE 802.11a/b/g Wi-Fi Radio Specifications.....................................................................................15 Table 6 – Specifications User Environment Multinode Device. ..........................................................................16 Table 7 – Power Specifications Multinode Device..............................................................................................16 Table 8 – External Cable Specification for Multinode Device.............................................................................18 Table 9- Antenna Cable Specifications for Multinode Device.............................................................................19 Table 10– Lightning Arrestor Specifications for Integral Antenna(s) ..................................................................19 Table 11– Lightning Arrestor Specifications for Remote Antenna(s)..................................................................19 Table 12 – Approved Antenna Types/Gains, DSSS, FHSS Radio.....................................................................20 Table 13 – Approved Antenna Types/Gains, 802.11a/b/g Radios .....................................................................21 Table 14 – EIRP Limits, DSSS 2.4GHz Radio....................................................................................................23 Table 15 - EIRP Limits, FHSS 2.4GHz Radio.....................................................................................................24 Table 17 – EIRP Limits, 802.11a (5.4GHz) Radios ............................................................................................26 Table 18 – EIRP Limits, 802.11b/g (2.4GHz) Radios .........................................................................................27 Table 19: 802.11 Radio Power Setting Reference..............................................................................................31
Honeywell Proprietary B 51121307 and Confidential REVISIONS FCF: OneWireless Standard Temperature Multinode Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: B 9/4/2008 SIZE Sh. No.: 6 of 35 1 DESIGNATION, SCOPE AND PREFACE 1.1 Designation HONEYWELL ONEWIRELESS MULTINODE DEVICE. 1.1.1 Model Numbers and Revisions : This document is valid for the following Multinode assembly number: Model Number Hardware Assembly # / Revision Description WNMN 51153884-100 / C Multinode Standard Temperature – 802.11a/b/g and 2.4GHz FHSS Radios WNMX 51153884-101/ C Multinode Standard Temperature – 802.11a/b/g and 2.4GHz DSSS Radios Table 1 – Assembly Number and Revision 1.2 Scope This document outlines professional installation requirements for the Honeywell Multinode Device for the Honeywell OneWireless Network. Professional installation is required to comply with certification agency and legal requirements. This document must be adhered to for all installations of the Honeywell OneWireless Multinode device. 1.3 Preface This manual covers professional installation of the optional external antennas for use with the Honeywell OneWireless Multinode device. Since this device requires manual power limit settings for use with the higher gain antennas, it is classified by the FCC as a professional install device. To be in compliance with FCC requirements, the radio must be installed with one of several approved antennas listed in this document. The Honeywell OneWireless Multinode device works in conjunction with Honeywell XYR5000 and XYR6000 wireless transmitters and Wi-Fi access point devices. See the Getting Started with Honeywell OneWireless, Honeywell OneWireless Planning Guide and Honeywell OneWireless Multinode User’s Guide, for general information on overall system implementation, configuration, and management of the multimode.
Honeywell Proprietary B 51121307 and Confidential REVISIONS FCF: OneWireless Standard Temperature Multinode Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: B 9/4/2008 SIZE Sh. No.: 7 of 35 1.4 Abbreviations & Definitions The term Honeywell Multinode Device (or simply Multinode) will be used to describe the composite unit which includes the Honeywell DSSS or FHSS Radio Board, 3eTI Mesh Board, Power Supply board, and all subassemblies housed inside the Multinode enclosure. ACMA Australian Communications and Media Authority ATEX Potentially Explosive Atmospheres Directive AWG American Wire Gauge Co-located Two or more radios transmitting simultaneously and with less than 20cm of separation distance. COTS Commercial Off-The-Shelf CSA Canadian Standards Association DFS Dynamic Frequency Selection DSSS Direct Sequence Spread Spectrum EMC Electromagnetic Compatibility ETSI European Telecommunications Standards Institute EU European Union FCC Federal Communications Committee FHSS Frequency-Hopping Spread Spectrum FM Factory Mutual IC Industry Canada IEEE Institute of Electrical and Electronics Engineers IR Infrared IrDA Infrared Data Association LED Light Emitting Diode MPE Maximum Permissible Exposure MTBF Mean Time Between Failures NEMA National Electrical Manufacturers Association PCB Printed Circuit Board PCI Peripheral Components Interconnect RAM Random Access Memory RJ-45 Registered Jack-45 RPN Reverse Polarity N-type SQA Supplier Quality Assurance Wi-Fi Wireless Local Area Network based on IEEE 802.11 Specifications WNSIA Wireless Network for Secure Industrial Application Table 2 –Table of Abbreviations and Definitions
Honeywell Proprietary B 51121307 and Confidential REVISIONS FCF: OneWireless Standard Temperature Multinode Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: B 9/4/2008 SIZE Sh. No.: 8 of 35 2 FEDERAL COMMUNICATION COMMISSION (FCC) 2.1 FCC Compliance Statements  This device complies with Part 15 of FCC Rules and Regulations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.  This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.  Intentional or unintentional changes or modifications must not be made to the Multinode unless under the express consent of the party responsible for compliance. Any such modifications could void the user’s authority to operate the equipment and will void the manufacturer’s warranty. 3 INDUSTRY CANADA (IC) 3.1 IC Compliance Statements  To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropic radiated power (EIRP) is not more than that permitted for successful communication.  Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.  This Class A digital apparatus complies with Canadian ICES-003.  French: Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Honeywell Proprietary B 51121307 and Confidential REVISIONS FCF: OneWireless Standard Temperature Multinode Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: B 9/4/2008 SIZE Sh. No.: 9 of 35 4 RF Safety Statement: To comply with FCC’s and Industry Canada’s RF exposure requirements, the following antenna installation and device operating configurations must be satisfied.  Remote Point-to-Multi-Point antenna(s) for this unit must be fixed and mounted on outdoor permanent structures with a separation distance between the antenna(s) of greater than 20cm and a separation distance of at least 20cm from all persons.  Remote Fixed Point–to-Point antenna(s) for this unit must be fixed and mounted on outdoor permanent structures with a separation distance between the antenna(s) of greater than 20cm and a separation distance of at least 100cm from all persons.  Furthermore, when using integral antenna(s) the Multinode unit must not be co-located with any other antenna or transmitter device and have a separation distance of at least 20cm from all persons.
Honeywell Proprietary B 51121307 and Confidential REVISIONS FCF: OneWireless Standard Temperature Multinode Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: B 9/4/2008 SIZE Sh. No.: 10 of 35 5 FCC and Industry Canada (IC) Identification Numbers: 5.1 FCC Identification Numbers: • Honeywell Multinode DSSS Radio o Limited Modular Approval o Federal Communication Commission Identification: S57 – 51306343 • Honeywell Multinode FHSS Radio o Limited Modular Approval o Federal Communication Commission Identification: S57 – WNMNFHSS • Honeywell Standard Temperature Multinode 802.11a/b/g Radio o Limited Modular Approval o Federal Communication Commission Identification: S57 – WNMNCM9 5.2 Industry Canada Identification Numbers: • Honeywell Multinode DSSS Radio o Limited Modular Approval o Industry Canada Identification: 573I – 51306343 • Honeywell Multinode FHSS Radio o Limited Modular Approval o Industry Canada Identification: 573I – WNMNFHSS • Honeywell Standard Temperature Multinode 802.11a/b/g Radio o Limited Modular Approval o Industry Canada Identification: 573I – WNMNCM9
Honeywell Proprietary B 51121307 and Confidential REVISIONS FCF: OneWireless Standard Temperature Multinode Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: B 9/4/2008 SIZE Sh. No.: 11 of 35 6 INTENDED COUNTRY USAGE 6.1 NORTH AMERICA Country ISO 3166 2 letter code UNIIITED STATES US CANADA CA 6.2 AUSTRALIA AND NEW ZEALAND Country ISO 3166 2 letter code AUSTRALIA AU NEW ZEALAND NZ 6.3 EUROPEAN UNION Country ISO 3166 2 letter code Country ISO 3166 2 letter code Austria AT Latvia LV Belgium BE Liechtenstein LI Bulgaria BG Lithuania LT Cyprus CY Malta MT Czech Republic CZ Netherlands NL Denmark DK Norway NO Estonia EE Poland PL Finland FI Portugal PT France FR Romania RO Germany DE Slovakia SK Greece GR Slovenia SI Hungary HU Spain ES Iceland IS Sweden SE Ireland IE Switzerland CH Italy IT United Kingdom BG
Honeywell Proprietary B 51121307 and Confidential REVISIONS FCF: OneWireless Standard Temperature Multinode Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: B 9/4/2008 SIZE Sh. No.: 12 of 35 7 MULTINODE GENERAL DESCRIPTION 7.1 Intended Use The Multinode unit is a key component of the Honeywell Wireless Network for Secure Industrial Application (WNSIA). It provides wireless mesh connectivity for wireless sensor networks and wireless worker appliances. The Multinode uses powerful radios to communicate with gateway devices connected to a wired DCS network, and a low-powered radio to communicate with wireless sensors. The Multinode unit consists of two types of radios: a sensor radio for communication with XYR 6000 transmitters and IEEE 802.11a/b/g radios for mesh (bridge) network and communication with mobile access point (client) devices. 7.2 Multinode Device Diagrams Error! Reference source not found. shows the unit-level drawing of the Multinode Device. All cables exit the unit via a ¾” conduit hub. The conduit hub allows end user to land conduit on the Multinode Device. Error! Reference source not found. shows the Multinode and all of external interfaces. Figure 1 – Diagram of Multinode Unit showing various external attributes
Honeywell Proprietary B 51121307 and Confidential REVISIONS FCF: OneWireless Standard Temperature Multinode Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: B 9/4/2008 SIZE Sh. No.: 13 of 35 8 PRODUCT SPECIFICATIONS 8.1 Frequency Hopping Spread Spectrum (DSSS) Radio, 2.4GHz Warning! The Multinode unit must be Professionally Installed in accordance with the requirements specified in this document. See Section 10, for professional installation maximum power setting requirements. Only the specified power settings, antenna types and gains and cable lengths (attenuation) as outlined in this document are valid for Multinode installations. Table 3 – Specifications of DSSS Radio in Multinode Device. Item Specification Wireless Standard Direct Sequence Spread Spectrum 2.4GHz Data Rates and Modulation Data Rate: 250kbps Modulation: OQPSK – DSSS Frequency Band 2,405 – 2,475MHz Transmit Power Maximum: 19dBm (Maximum transmit power will vary by channel and individual country regulations. Receive Sensitivity (typical) -95dBm
Honeywell Proprietary B 51121307 and Confidential REVISIONS FCF: OneWireless Standard Temperature Multinode Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: B 9/4/2008 SIZE Sh. No.: 14 of 35 8.2 Frequency Hopping Spread Spectrum (FHSS) Radio, 2.4GHz Warning! The Multinode unit must be Professionally Installed in accordance with the requirements specified in this document. See Section 10, for professional installation maximum power setting requirements. Only the specified power settings, antenna types and gains and cable lengths (attenuation) as outlined in this document are valid for Multinode installations. Table 4– Specifications of FHSS Radio in Multinode Device. Item Specification Wireless Standard Frequency Hopping Spread Spectrum (FHSS), 2.4GHz Data Rates and Modulation Data Rate: 250kbps Modulation: Gaussian Frequency Shift Keying (GFSK) Frequency Band 2,402 – 2,482MHz Transmit Power Maximum: 19dBm (Maximum transmit power will vary by channel and individual country regulations. Receive Sensitivity (typical) -98dBm
Honeywell Proprietary B 51121307 and Confidential REVISIONS FCF: OneWireless Standard Temperature Multinode Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: B 9/4/2008 SIZE Sh. No.: 15 of 35 8.3 IEEE 802.11a/b/G (Wi-Fi) Radios The Multinode has two IEEE 802.11 radios for implementing client (access point) and mesh (bridge) networks. Warning! The Multinode unit must be Professionally Installed in accordance with the requirements specified in this document. See Section 11, for professional installation maximum power setting requirements. Only the specified power settings, antenna types and gains and cable lengths (attenuation) as outlined in this document are valid for Multinode installations. Table 5 - IEEE 802.11a/b/g Wi-Fi Radio Specifications. Item Specification Wireless Standards IEEE 802.11a/b/g Data Rates and Modulation • 802.11a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps, Orthogonal Frequency Division Multiplexing (OFDM) • 802.11b: 11, 5.5, 2, 1 Mbps, Direct Sequence Spread Spectrum (DSSS) • 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps, OFDM Frequency Bands and Operating Channels United States and Canada (FCC and IC): • 802.11b/g: 2,412 – 2,462MHz, Channels 1 – 11 • 802.11a: 5,745 – 5,825, Channels 149,153,157,161,165 Europe (ETSI): • 802.11b/g: 2,412 – 2,472MHz, Channels 1 – 13 • 802.11a: 5,500 – 5,700, Channels 100,104,108,112,116,120,124,128,132,136,140 Australia (ACMA): • 802.11b/g: 2,412 – 2,472MHz, Channels 1 – 13 • 802.11a: 5,745 – 5,825, Channels 149,153,157,161,165 Transmit power (Maximum transmit power will vary by channel, data rate, and individual country regulations. Maximum: • 802.11a: 23 dBm • 802.11b: 16 dBm • 802.11g: 16 dBm Receive sensitivity (typical) 802.11a: -88dB@6Mbps, -87dB@9Mbps, -85@12Mbps, -83dB@18Mbps, -80dB@24Mbps, -75dB@36Mbps, -73dB@48Mbps, -71dB@54Mbps 802.11b: -95dB@1Mbps, -94dB@2Mbps, -92dB@5.5Mbps, -90dB@11Mbps 802.11g: -90dB@6Mbps, -89dB@9Mbps, -87@12Mbps, -85dB@18Mbps, -82dB@24Mbps, -79dB@36Mbps, -76dB@48Mbps, -74dB@54Mbps
Honeywell Proprietary B 51121307 and Confidential REVISIONS FCF: OneWireless Standard Temperature Multinode Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: B 9/4/2008 SIZE Sh. No.: 16 of 35 8.4 Multinode User Environment Item Specification Operating Temperature: -20 OC to +60 OC Storage Temperature: -20 OC to +60 OC Operating Humidity: 0 to 100% RH Table 6 – Specifications User Environment Multinode Device. 8.5 Multinode Power Specifications Item Specification Operating Voltage: 20.4Vdc to 26.4Vdc Power Consumption (typical): 25W Table 7 – Power Specifications Multinode Device. 8.6 Weight The weight of the complete Multinode units shall be 7.0 lb. (3.2 kg) maximum. This weight does not include the integral antennas or other external accessories. .
Honeywell Proprietary B 51121307 and Confidential REVISIONS FCF: OneWireless Standard Temperature Multinode Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: B 9/4/2008 SIZE Sh. No.: 17 of 35 8.7 Dimensions Figure 2 – Dimension of the Multinode Device
Honeywell Proprietary A 51121307 and Confidential A REVISIONS FCF: OneWireless Multinode Agency Compliance Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: A 07/29/2008 SIZE Sh. No.: 18 of 35 9 Cables 9.1 External Interface Cables Cable Type Specification Qty Comments/Specification External Ethernet CAT5E Stranded Core 2 Routed through conduit hub. Termination = RJ-45 Modular Plug Finished Length = 24 inches 24VDC Power Multi-conductor, AWG 1 Finished Length = 24 inches Routed through conduit hub Conductor Color: Red & Green = 24VDC White & Black = Common Drain wire = Chassis potential Ground Conductor AWG10 1 Routed through conduit hub Color = Green or Green with yellow stripes. Finished length = 24 inches Note: • Finished length is measured from conduit hub to outside tip of cable. • Ground conductor must be attached to product safety protective earth and building steel ground. • All external wiring must be routed through metal conduit. Table 8 – External Cable Specification for Multinode Device.
Honeywell Proprietary A 51121307 and Confidential A REVISIONS FCF: OneWireless Multinode Agency Compliance Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: A 07/29/2008 SIZE Sh. No.: 19 of 35 9.2 Antenna Cables Cable Application Honeywell Part # Cable Type Connector Type Frequency (GHz) Length (m) Loss (dB) DSSS, FHSS 50018278-001 400 Series N male to N male 2.4 1 0.9 DSSS, FHSS 50018278-003 400 Series N male to N male 2.4 3 1.1 DSSS, FHSS 50018278-010 400 Series N male to N male 2.4 10 2.4 802.11a/b/g 51202358-001 400 Series RPN plug to N male 2.4/5.8 1 0.9 / 1.8802.11a/b/g 51202358-003 400 Series RPN plug to N male 2.4/5.8 3 1.1 / 2.3802.11a/b/g 51202358-010 400 Series RPN plug to N male 2.4/5.8 10 2.4 / 3.8Table 9- Antenna Cable Specifications for Multinode Device. 10 Antenna Lightning Arrestors 10.1 For use with Integral Antenna(s) Application Honeywell Part Number Specification Connector Type Frequency (GHz) Attenuation(dB) DSSS, FHSS 51202359-200 50 ohm NM - NF 0 – 6 0.4 (max) 802.11 a/b/g 51202359-300 50 ohm RPN Plug - NF 0 - 6 0.5 (max) Table 10– Lightning Arrestor Specifications for Integral Antenna(s) 10.2 For use with Remote Antenna(s) Application Honeywell Part Number Specification Connector Type Frequency (GHz) Attenuation (dB) DSSS, FHSS 50018279-090 50 ohm NF to NF 0 – 3 0.4 (max) 802.11 a/b/g 51202359-100 50 ohm NF toNF 0 - 6 0.5 (max) NOTE: Depending on application needs, the “integral” arrestors may be used for remote antennas. Table 11– Lightning Arrestor Specifications for Remote Antenna(s)
Honeywell Proprietary A 51121307 and Confidential A REVISIONS FCF: OneWireless Multinode Agency Compliance Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: A 07/29/2008 SIZE Sh. No.: 20 of 35 11 Approved Antenna Types/Gains 11.1 DSSS, FHSS 2.4GHz Radio: Antenna Type Antenna Application Manufacturer Manufacturer Part Number HoneywellPart Number Beam WidthPeak Gain (dBi) Freq. (GHz) Agency Compliance Omni (integral) Point to Multi-Point PacWireless OD24M-5 51506534-101 Omni 5 2.4 FCC, IC, ETSI, ACMA Omni (integral) Point to Multi-Point SMARTANT SAA04-051000 51506534-101 Omni 5 2.4 FCC, IC, ETSI, ACMA Omni (integral) Point to Multi-Point SMARTANT HON04-052160 51506534-100 Omni 5 2.4 FCC, IC, ETSI, ACMA Omni (remote) Point to Multi-Point HYPERLINK HGV-2409U 50018414-001 Omni 8 2.4 FCC, IC, ETSI, ACMA Sector (remote) Point to Multi-Point HYPERLINK HG2414SP-120 NA 120° 14 2.4 FCC, IC, ETSI, ACMA Table 12 – Approved Antenna Types/Gains, DSSS, FHSS Radio
Honeywell Proprietary A 51121307 and Confidential A REVISIONS FCF: OneWireless Multinode Agency Compliance Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: A 07/29/2008 SIZE Sh. No.: 21 of 35 11.2 802.11a/b/g Access point and Bridge (Mesh) Radio Antenna Type Antenna Application Manufacturer Manufacturer Part Number HoneywellPart Number Beam Width Peak Gain (dBi) Freq (GHz) Agency Compliance 4.5 2.4 802.11b/g FCC, IC, ETSI, ACMA 5.4 802.11a ETSI Omni (integral) Point to Multi-Point SMARTANT SAA04-220080 51153883-305 Omni 7 5.8 802.11a FCC, IC, ACMA Omni (remote) Point to Multi-Point HYPERLINK HGV-2409U 50018414-001 Omni 8 2.4 802.11b/g FCC, IC, ETSI, ACMA Omni (remote) Point to Multi-Point HYPERLINK HG5412U NA Omni 12 5.4 802.11a ETSI Omni (remote) Point to Multi-Point HYPERLINK HG5812U-PRO NA Omni 12 5.8 802.11a FCC, IC, ACMA Sector (remote) Point to Multi-Point HYPERLINK HG2414SP-120 NA 120° 14 2.4 802.11b/g FCC, IC, ETSI, ACMA Sector (remote) Point to Multi-Point HYPERLINK HG5417P-090 NA 90° 17 5.4 802.11a ETSI Sector (remote) Point to Multi-Point HYPERLINK HG5817P-090 NA 90° 17 5.8 802.11a FCC, IC, ACMA YAGI (remote) Point to Multi-Point TELEX 5816AB NA 19° 16.5 5.8 802.11a FCC, IC, ACMA DISH (remote) Fixed Point to Point HYPERLINK HG5423D NA 9° 23 5.4 802.11a ETSI DISH (remote) Fixed Point to Point HYPERLINK HG5824D NA 9° 24 5.8 802.11a FCC, IC, ACMA Table 13 – Approved Antenna Types/Gains, 802.11a/b/g Radios
Honeywell Proprietary A 51121307 and Confidential A REVISIONS FCF: OneWireless Multinode Agency Compliance Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: A 07/29/2008 SIZE Sh. No.: 22 of 35 12 Equivalent Isotropically Radiated Power (EIRP) In radio communication systems, Equivalent isotropically radiated power (EIRP), or alternatively, Effective isotropic radiated power is the amount of power that would have to be emitted by an isotropic antenna (that evenly distributes power in all directions and is a theoretical construct) to produce the peak power density observed in the direction of maximum antenna gain. EIRP can take into account the losses in transmission line and connectors and includes the gain of the antenna. The EIRP is often stated in terms of decibels over a reference power level, that would be the power emitted by an isotropic radiator with an equivalent signal strength. The EIRP allows making comparisons between different emitters regardless of type, size or form. From the EIRP, and with knowledge of a real antenna's gain, it is possible to calculate real power and field strength values. EIRP(dBm) = (Radio Power (dBm)) – (Cable Loss (dB)) + (Antenna Gain(dBi)) Antenna gain is expressed relative to a (theoretical) isotropic reference antenna (dBi).
Honeywell Proprietary A 51121307 and Confidential A REVISIONS FCF: OneWireless Multinode Agency Compliance Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: A 07/29/2008 SIZE Sh. No.: 23 of 35 13 EIRP LIMITS, DSSS 2.4GHz RADIO Antenna Type Radio Usage / Application Freq. (GHz) Max. Ant. Gain (dBi) Min. Cable Length (m) Min. Cable Loss (dB) Max. Radio Output Power (dBm) Max. EIRP (dBm) Agency/ Country 20 25 FCC, IC Omni Point to Multi-Point Integral 2.4 5 0 0 6 11 ETSI 5, ACMA 19 26 FCC, IC Omni Point to Multi-Point Remote 2.4 8 1 0.9 5 12 ETSI 5, ACMA 15 28 FCC, IC Sector Point to Multi-Point Remote 2.4 14 1 0.9 0 13 ETSI 5, ACMA Notes: 1. The values in the above table have been determined through agency certification testing. 2. Maximum transmit power will vary by channel, data rate, and individual country regulations. 3. The following shall apply for antenna type, frequency range, application/usage and agency/country compliance: • Antenna gains above the maximum values shown shall not be used. • Cable length/loss below the minimum values shown shall not be used. • Maximum overall radio output power shown shall not be exceeded. • Maximum EIRP values shown above shall not be exceeded. 4. Beam width, for sector and dish antenna, may range between 0 – 180degress. 5. France restricts outdoor use to 10mW (10dBm) EIRP in the frequency range of 2,454-2,483.5 MHz. Installations in France must limit EIRP to 10dBm, for operating modes utilizing frequencies in the range of 2,454 – 2,483.5MHz. 6. Industry Canada Compliance Statement: This device has been designed to operate with the antenna types listed in this document, and having a maximum gain of 14dBi. Antenna types not included in this list or having a gain greater than 14dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. Table 14 – EIRP Limits, DSSS 2.4GHz Radio
Honeywell Proprietary A 51121307 and Confidential A REVISIONS FCF: OneWireless Multinode Agency Compliance Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: A 07/29/2008 SIZE Sh. No.: 24 of 35 14 EIRP LIMITS, FHSS 2.4GHz RADIO Antenna Type Radio Usage / Application Freq. (GHz) Max. Ant. Gain (dBi) Min. Cable Length (m) Min. Cable Loss (dB) Max. Radio Output Power (dBm) Max. EIRP (dBm) Agency/ Country 19 24 FCC, IC Omni Point to Multi-Point Integral 2.4 5 0 0 14 19 ETSI 5, ACMA 17 24 FCC, IC Omni Point to Multi-Point Remote 2.4 8 1 0.9 12 19 ETSI 5, ACMA 12 25 FCC, IC Sector Point to Multi-Point Remote 2.4 14 1 0.9 6 19 ETSI 5, ACMA Notes: 7. The values in the above table have been determined through agency certification testing. 8. Maximum transmit power will vary by channel, data rate, and individual country regulations. 9. The following shall apply for antenna type, frequency range, application/usage and agency/country compliance: • Antenna gains above the maximum values shown shall not be used. • Cable length/loss below the minimum values shown shall not be used. • Maximum overall radio output power shown shall not be exceeded. • Maximum EIRP values shown above shall not be exceeded. 10. Beam width, for sector and dish antenna, may range between 0 – 180degress. 11. France restricts outdoor use to 10mW (10dBm) EIRP in the frequency range of 2,454-2,483.5 MHz. Installations in France must limit EIRP to 10dBm, for operating modes utilizing frequencies in the range of 2,454 – 2,483.5MHz. 12. Industry Canada Compliance Statement: This device has been designed to operate with the antenna types listed in this document, and having a maximum gain of 14dBi. Antenna types not included in this list or having a gain greater than 14dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. Table 15 - EIRP Limits, FHSS 2.4GHz Radio
Honeywell Proprietary A 51121307 and Confidential A REVISIONS FCF: OneWireless Multinode Agency Compliance Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: A 07/29/2008 SIZE Sh. No.: 25 of 35 15 EIRP LIMITS, 802.11a (5.8GHz) Access Point and Bridge Radio Ant. Type Radio Usage / Application Freq. (GHz) Max. Ant. Gain (dBi) Min. Cable Length (m) Min. Cable Loss (dB) Max. Radio Output Power (dBm) Max. EIRP (dBm) Pro-Install Power Setting Agency/ Country 23 30 25 FCC, IC Omni Point to Multi-Point Integral 5.8 802.11a 7 0 0 23 30 25 ACMA 23 33 25 FCC, IC Omni Point to Multi-Point Remote 5.8 802.11a 12 1 1.8 20 30 2 ACMA 17 32 -7 FCC, IC Sector Point to Multi-Point Remote 5.8 802.11a 17 1 1.8 14 30 -12 ACMA 17 31 -7 FCC, IC Yagi Point to Multi-Point Remote 5.8 802.11a 16.5 1 1.8 15 30 -11 ACMA 23 45 25 FCC, IC Dish Fixed Pt. to Pt. Remote 5.8 802.11a 24 1 1.8 8 30 -24 ACMA Notes: 1. The values in the above table have been determined through agency certification testing. 2. Maximum transmit power will vary by channel, data rate, and individual country regulations. 3. The following shall apply for antenna type, frequency range, application/usage and agency/country compliance: • Antenna gains above the maximum values shown shall not be used. • Cable length/loss below the minimum values shown shall not be used. • Maximum overall radio output power shown shall not be exceeded. • Maximum EIRP values shown above shall not be exceeded. 4. Beam width, for sector and dish antenna, may range between 0 – 180degress. 5. Industry Canada Compliance Statement: This device has been designed to operate with the antenna types listed in this document, and having a maximum gain of 24dBi. Antenna types not included in this list or having a gain greater than 24dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. Table 16– EIRP Limits, 802.11a (5.8GHz) Radios
Honeywell Proprietary A 51121307 and Confidential A REVISIONS FCF: OneWireless Multinode Agency Compliance Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: A 07/29/2008 SIZE Sh. No.: 26 of 35 16 EIRP LIMITS, 802.11a (5.4GHz) Access Point and Bridge Radio Ant. Type Radio Usage / Application Freq. (GHz) Max. Ant. Gain (dBi) Min. Cable Length (m) Min. Cable Loss (dB) Max. Radio Output Power (dBm) Max. EIRP (dBm) Pro-Install Power Setting Agency/ Country Omni Point to Multi-Point Integral 5.4 802.11a 7 0 0 23 30 2 ETSI Omni Point to Multi-Point Remote 5.4 802.11a 12 1 1.8 19 30 -6 ETSI Sector Point to Multi-Point Remote 5.4 802.11a 17 1 1.8 14 30 -17 ETSI Dish Fixed Pt. to Pt. Remote 5.4 802.11a 23 1 1.8 8 30 -35 ETSI Notes: 1. The values in the above table have been determined through agency certification testing. 2. Maximum transmit power will vary by channel, data rate, and individual country regulations. 3. The following shall apply for antenna type, frequency range, application/usage and agency/country compliance: • Antenna gains above the maximum values shown shall not be used. • Cable length/loss below the minimum values shown shall not be used. • Maximum overall radio output power shown shall not be exceeded. • Maximum EIRP values shown above shall not be exceeded. 4. Beam width, for sector and dish antenna, may range between 0 – 180degress. 5. Industry Canada Compliance Statement: This device has been designed to operate with the antenna types listed in this document, and having a maximum gain of 23dBi. Antenna types not included in this list or having a gain greater than 23dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. Table 17 – EIRP Limits, 802.11a (5.4GHz) Radios
Honeywell Proprietary A 51121307 and Confidential A REVISIONS FCF: OneWireless Multinode Agency Compliance Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: A 07/29/2008 SIZE Sh. No.: 27 of 35 17 EIRP LIMITS, 802.11b/g (2.4GHz) Access Point and Bridge Radio Ant. Type Radio Usage / Application Freq. (GHz) Max. Ant. Gain (dBi) Min. Cable Length (m) Min. Cable Loss (dB) Max. Radio Output Power (dBm) Max. EIRP (dBm) Pro-Install Power Setting Agency/ Country 16 21 40 FCC, IC Omni Point to Multi-Point Integral 2.4 802.11b/g 4.5 0 0 15 19 2 ETSI, ACMA 16 23 40 FCC, IC Omni Point to Multi-Point Remote 2.4 802.11b/g 8 1 0.9 12 19 -4 ETSI, ACMA 10 2.4 16 28 40 FCC, IC Sector Point to Multi-Point Remote 2.4 802.11b/g 14 1 0.9 6 19 -23 ETSI, ACMA Notes: 1. The values in the above table have been determined through agency certification testing. 2. Maximum transmit power will vary by channel, data rate, and individual country regulations. 3. The following shall apply for antenna type, frequency range, application/usage and agency/country compliance: • Antenna gains above the maximum values shown shall not be used. • Cable length/loss below the minimum values shown shall not be used. • Maximum overall radio output power shown shall not be exceeded. • Maximum EIRP values shown above shall not be exceeded. 4. Beam width, for sector and dish antenna, may range between 0 – 180degress. 5. France restricts outdoor use to 10mW (10dBm) EIRP in the frequency range of 2,454-2,483.5 MHz. Installations in France must limit EIRP to 10dBm, for operating modes utilizing frequencies in the range of 2,454 – 2,483.5MHz. 6. Industry Canada Compliance Statement: This device has been designed to operate with the antenna types listed in this document, and having a maximum gain of 14dBi. Antenna types not included in this list or having a gain greater than 14dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. Table 18 – EIRP Limits, 802.11b/g (2.4GHz) Radios
Honeywell Proprietary A 51121307 and Confidential A REVISIONS FCF: OneWireless Multinode Agency Compliance Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: A 07/29/2008 SIZE Sh. No.: 28 of 35 18 Setting Power and Country Code: FHSS Radio Warning! The Multinode unit must be Professionally Installed in accordance with the requirements specified in this document. Only the specified power settings, antenna types and gains and cable lengths (attenuation) as outlined in this document are valid for Multinode installations. Set the radio power level using the Authentication Device application. Due to regulations, this command is only available if professional installer options have explicitly been enabled on your PDA. If you have not enabled professional installer options and would like to do so, please contact Honeywell DE or TAC. A separate application, AuthDev Power Settings, is required to enable the "Write TX Power Level" option. Perform the following procedure to read and change the radio power level on your multinode or wireless device: • Open the Authentication Device application on your Windows Mobile PDA. • From the main menu, choose the Advanced Options menu to open the Advanced Options form. • From the Advanced Options form, choose "Read TX Power Level" from the command drop down box. • Aim the Authentication Device at your node and press the Transmit Command button to read the data from the node. The TX Power reading will be presented on your screen. • If you have enabled professional installer options within the Authentication Device, choose the "Write TX Power Level" from the command drop down box. • Choose a new power level. Aim the Authentication Device at your node and press the Transmit Command button to write the data to the node.
Honeywell Proprietary A 51121307 and Confidential A REVISIONS FCF: OneWireless Multinode Agency Compliance Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: A 07/29/2008 SIZE Sh. No.: 29 of 35 19 Setting Power & Country Code: 802.11 Access Point & Bridge Radio Warning! The Multinode unit must be Professionally Installed in accordance with the requirements specified in this document. Only the specified power settings, antenna types and gains and cable lengths (attenuation) as outlined in this document are valid for Multinode installations. Programming the Country Code A hidden page on the Multinode Configuration Tool has been designed for professional installers to change country code and radio output power settings. A valid authorization code has to be entered for the any information to be modified. This authorization code is hard-coded in the firmware and shall be kept as a SECRET at all times. To access the hidden page, type the following URL in your browser: https://192.168.254.128/cgi-bin/sgateway?PG=911 Change 192.168.254.128 to the IP address of your unit, and make sure you login as: Login: CryptoOfficer, Password: CryptoFIPS You should see something like this:
Honeywell Proprietary A 51121307 and Confidential A REVISIONS FCF: OneWireless Multinode Agency Compliance Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: A 07/29/2008 SIZE Sh. No.: 30 of 35 The authorization code is: “Raptor2007!” without the quote (YOU MUST KEEP THIS AS A SECRET) Change the following options based on values you determined in Section 11:  Country Code  Adjustment to Max TX power of Access Point Radio (increase or decrease)  Adjustment to Max TX power of Bridge Radio (increase or decrease) After applying the changes, you will be notified to reboot the unit for any changes to take effect. Note that the adjustment of radio Max TX power has limits. It will level off on both the low end and high end. This feature is provided for professional installers to adjust the card output power to match the specific selection of antenna and keep the total output power under the regulatory threshold. The setting here are saved in non-volatile memory inside the unit. Restoring the unit to factory default settings does not change these values.
Honeywell Proprietary A 51121307 and Confidential A REVISIONS FCF: OneWireless Multinode Agency Compliance Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: A 07/29/2008 SIZE Sh. No.: 31 of 35 19.1 Power Setting Reference Table, 802.11 Access Point & Bridge Radio: Multinode Bridge and Access Point Radio Ports WIRELESS MODE 802.11a 802.11a 802.11b/g mixed 802.11b/g mixed CHANNEL 120 (5.6GHz) 157 (5.785GHz) 7 (2.442GHz) 6 (2.437GHz) TX PWR MODE FIXED, 8 FIXED, 8 FIXED, 8 FIXED, 8 Professional Installer TX Power Setting MEASURED OUTPUT POWER (dBm) MEASURED OUTPUT POWER (dBm) MEASURED OUTPUT POWER (dBm) MEASURED OUTPUT POWER (dBm) 40 24.0 23.0 17.2 16.2 35 24.0 23.0 17.2 16.2 30 24.0 23.0 17.2 16.2 25 24.0 23.0 17.2 16.2 20 24.0 23.0 17.2 16.2 15 24.0 23.0 17.2 16.2 10 23.9 20.7 17.2 16.2 5 23.7 20.1 15.7 16.2 0 21.8 19.6 13.8 16.1 -5 19.7 17.2 11.3 12.4 -10 17.0 15.7 9.0 10.7 -15 15.0 11.8 7.4 8.4 -20 12.5 8.9 6.7 6.4 -25 9.7 7.3 5.2 4.9 -30 8.5 5.2 2.4 2.8 -35 8.4 4.6 2.3 1.6 -40 8.4 4.6 2.3 1.4 Table 19: 802.11 Radio Power Setting Reference
Honeywell Proprietary A 51121307 and Confidential A REVISIONS FCF: OneWireless Multinode Agency Compliance Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: A 07/29/2008 SIZE Sh. No.: 32 of 35 20 RF Safety, Maximum Permissible Exposure (MPE) statement To comply with FCC’s and Industry Canada’s RF exposure requirements, the following antenna installation and device operating configurations must be satisfied.  Remote Point-to-Multi-Point antenna(s) for this unit must be fixed and mounted on outdoor permanent structures with a separation distance between the antenna(s) of greater than 20cm and a separation distance of at least 20cm from all persons.  Remote Fixed Point–to-Point antenna(s) for this unit must be fixed and mounted on outdoor permanent structures with a separation distance between the antenna(s) of greater than 20cm and a separation distance of at least 100cm from all persons.  Furthermore, when using integral antenna(s) the Multinode unit must not be co-located with any other antenna or transmitter device and have a separation distance of at least 20cm from all persons.
Honeywell Proprietary A 51121307 and Confidential A REVISIONS FCF: OneWireless Multinode Agency Compliance Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: A 07/29/2008 SIZE Sh. No.: 33 of 35 21 AGENCY COMPLIANCE 21.1 Radio and EMC Certifications 21.1.1 Federal Communication Commission (FCC)  Specification: FCC Part 15.247 Subpart B for unintentional radiators  Specification: FCC Part 15.247 Subpart C for intentional radiators 21.1.2 Industry Canada (IC)  Method: RSS-210, Issue 7  RSS-Gen, Issue 2  ICES-003, Issue 4 21.1.3 European Telecommunications Standards Institue (ETSI)  Emissions Specification and Method: EN 300 328 V1.7.1  Emissions Spec and Method: EN 301 893 V1.3.1  Immunity Specification: EN 301 489-17 V1.2.1  Immunity Method: EN 301 489-1 V1.6.1  Product Standard: IEC61326-1 (1st Edition, 2002-02, Industrial Locations) 21.1.4 Australian communications and media authority (ACMA)  Specification: AS NZS 4771-2000
Honeywell Proprietary A 51121307 and Confidential A REVISIONS FCF: OneWireless Multinode Agency Compliance Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: A 07/29/2008 SIZE Sh. No.: 34 of 35 21.2 Product Safety Agency Certifications 21.2.1 Canadian Standards Association (CSA) CSA electrical equipment requirements for use within Division 2 and Zone 2 hazardous locations. IEC61010-1 (2nd Edition, 2001-02), "Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use, part 1: General Requirements Canadian Standards Association Standard C22.2 No. 213-M1987, "Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations" Canadian Standards Association Standard E60079-0:02, “Electrical Apparatus for explosive gas atmospheres – General Requirements” Canadian Standards Association Standard E60079-15:02, “Electrical Apparatus for explosive gas atmospheres – Type of Protection “n”” • Temperature code: T4 (135°C) based on the maximum specified ambient of 60°C. 21.2.2 Factory Mutual (FM) FM electrical equipment requirements for use within Division 2 and Zone 2 hazardous locations. Factory Mutual Approval Standard Class No. 3600, "Electrical Equipment for Use in Hazardous (Classified) Locations - General Requirements Factory Mutual Approval Standard Class No. 3810, "Electrical and Electronic Test, Measuring, and Process Control Equipment Factory Mutual Approval Standard Class No. 3611, "Electrical Equipment for Use in Class I, Division 2, Class II, Division 2 and Class III, Division 1 and 2 Hazardous (Classified) Locations ANSI/ISA 12.00.01-2002, “Electrical Apparatus for Use in Class I, Zones 0, 1 & 2 Hazardous (Classified) Locations: General Requirements” ANSI/ISA 12.12.02-2003, “Electrical Apparatus for explosive gas atmospheres – Type of Protection “n”” • Temperature code: T4 (135°C) based on the maximum specified ambient of 60°C.
Honeywell Proprietary A 51121307 and Confidential A REVISIONS FCF: OneWireless Multinode Agency Compliance Professional Installation Guide Honeywell FMF: IACD/Ft.W Made by: David Shipley Approval Prints to A 51121307 Issue: A 07/29/2008 SIZE Sh. No.: 35 of 35 21.2.3 European ATEX Certification (ATEX) The completely assembled Multinode will conform to European electrical equipment requirements for use within Zone 2 Hazardous Locations. IEC 60079-0:2004-01, “Electrical Apparatus for explosive gas atmospheres – General Requirements IEC 60079-15:2005-03, “Electrical Apparatus for explosive gas atmospheres – Type of Protection “n” • Temperature code: T4 (135°C) based on the maximum specified ambient of 60°C. 21.3 European Union Certification (CE-mark) • Compliance with: o R&TTE Directive 1999/5/EC o EMC Directive 2004/108/EC o LVD Directive 73/23/EEC o ATEX Directive 94/9/EC 22 Reference Documents 1 Getting Started with Honeywell OneWireless 2 Honeywell OneWireless Planning Guide 3 Honeywell OneWireless Multinode User’s Guide 4 Radio Antenna: A Primer White Paper 5 Honeywell OneWireless System Administration Guide 6 Honeywell OneWireless Field Network Dictionary 7 OneWireless Builder Parameter Reference 8 OneWireless Builder User’s Guide

Navigation menu