Honeywell 51306533 51306533 User Manual Reg guide

Honeywell International Inc. 51306533 Reg guide

Contents

Reg guide

Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 1 of 25 OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell Process Solutions
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 2 of 25 Revision Record Revision Date Purpose/Distribution
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 3 of 25 TABLE OF CONTENTS 1DESIGNATION, SCOPE AND PREFACE ........................................................................................... 61.1DESIGNATION ..................................................................................................................................... 61.1.1Model Numbers and Revisions : .................................................................................................. 61.2SCOPE ............................................................................................................................................... 61.3PREFACE ........................................................................................................................................... 61.4ABBREVIATIONS & DEFINITIONS ........................................................................................................... 72FEDERAL COMMUNICATION COMMISSION (FCC) ........................................................................ 82.1FCC COMPLIANCE STATEMENTS ......................................................................................................... 83INDUSTRY CANADA (IC) .................................................................................................................... 83.1IC COMPLIANCE STATEMENTS ............................................................................................................. 84RF SAFETY STATEMENT: ................................................................................................................. 95FCC AND INDUSTRY CANADA (IC) IDENTIFICATION NUMBERS: .............................................. 105.1FCC IDENTIFICATION NUMBERS: ....................................................................................................... 105.2INDUSTRY CANADA IDENTIFICATION NUMBERS: .................................................................................. 106INTENDED COUNTRY USAGE ........................................................................................................ 116.1NORTH AMERICA ......................................................................................................................... 116.2AUSTRALIA AND NEW ZEALAND ................................................................................................ 116.3EUROPEAN UNION ....................................................................................................................... 117MULTINODE GENERAL DESCRIPTION .......................................................................................... 127.1INTENDED USE ................................................................................................................................. 127.2FDAP DEVICE DIAGRAMS ................................................................................................................. 128PRODUCT SPECIFICATIONS ........................................................................................................... 138.1DIRECT SEQUENCE SPREAD SPECTRUM (DSSS) RADIO, 2.4GHZ ...................................................... 138.2FDAP USER ENVIRONMENT .............................................................................................................. 148.3FDAP POWER SPECIFICATIONS ........................................................................................................ 148.4ANTENNA CABLES............................................................................................................................. 159ANTENNA LIGHTNING ARRESTORS ............................................................................................. 159.1FOR USE WITH INTEGRAL OR REMOTE ANTENNA(S) ............................................................................ 159.2FOR USE WITH REMOTE ANTENNA(S) ................................................................................................. 1510APPROVED ANTENNA TYPES/GAINS ........................................................................................... 1611EQUIVALENT ISOTROPICALLY RADIATED POWER (EIRP) ........................................................ 1712EIRP LIMITS, DSSS 2.4GHZ RADIO ................................................................................................ 1812.1FCC, IC, ACMA .............................................................................................................................. 18
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 4 of 25 12.2ETSI ................................................................................................................................................ 1913SETTING POWER AND COUNTRY CODE: DSSS RADIO ............................................................. 2014RF SAFETY, MAXIMUM PERMISSIBLE EXPOSURE (MPE) STATEMENT ................................... 2115AGENCY COMPLIANCE ................................................................................................................... 2215.1RADIO AND EMC CERTIFICATIONS ..................................................................................................... 2215.1.1Federal Communication Commission (FCC)......................................................................... 2215.1.2Industry Canada (IC) ............................................................................................................. 2215.1.3European Telecommunications Standards Institue (ETSI) ................................................... 2215.1.4Australian communications and media authority (ACMA) ..................................................... 2215.2PRODUCT SAFETY AGENCY CERTIFICATIONS ..................................................................................... 2315.2.1Canadian Standards Association (CSA) ............................................................................... 2315.2.2Factory Mutual (FM) .............................................................................................................. 2415.2.3European ATEX Certification (ATEX) .................................................................................... 2515.3EUROPEAN UNION CERTIFICATION (CE-MARK) ................................................................................... 2516REFERENCE DOCUMENTS ............................................................................................................. 25
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 5 of 25 LIST OF FIGURES Figure 1 –Diagram of Multinode Unit showing various external attributes _____________________________ 12Figure 2 – Dimension of the Multinode Device ___________________________ Error! Bookmark not defined. LIST OF TABLES Table 1 – Assembly Number and Revision ............................................................................................................. 6Table 2 –Table of Abbreviations and Definitions .................................................................................................... 7Table 3 – Specifications of DSSS Radio in FDAP Device. ................................................................................... 13Table 4 – Specifications User Environment FDAP Device. .................................................................................. 14Table 5 – Power Specifications FDAP Device. ..................................................................................................... 14Table 6 - Antenna Cable Specifications for Multinode Device. ............................................................................. 15Table 7 – Lightning Arrestor Specifications for Integral Antenna(s) ..................................................................... 15Table 8 – Lightning Arrestor Specifications for Remote Antenna(s) ..................................................................... 15Table 9 – Approved Antenna Types and Gains .................................................................................................... 16Table 10 – EIRP Limits, DSSS 2.4GHz Radio ...................................................................................................... 18Table 11 – EIRP Limits, DSSS 2.4GHz Radio ...................................................................................................... 19
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 6 of 25 1 DESIGNATION, SCOPE AND PREFACE 1.1 Designation HONEYWELL ONEWIRELESS FIELD DEVICE ACCESS POINT (FDAP). 1.1.1 Model Numbers and Revisions : This document is valid for the following assembly number: Model Number Assembly # Rev. Description FDAP1 51198665-100 A Field Device Access Point with Class 1 Div 1 certification (24VDC power input) FDAP2 51198665-200 A Field Device Access Point with Class 1 Div 2 certification (i.e. 24VDC and 120/230V AC power input) Table 1 – Assembly Number and Revision 1.2 Scope This document outlines professional installation requirements for the Honeywell Field Device Access Point (FDAP) for the Honeywell OneWireless Network. Professional installation is required to comply with certification agency and legal requirements. This document must be adhered to for all installations of the Honeywell OneWireless FDAP device. 1.3 Preface This manual covers professional installation of the optional external antennas for use with the Honeywell OneWireless FDAP device. Since this device requires manual power limit settings for use with the higher gain antennas, it is classified by the FCC as a professional install device. To be in compliance with FCC requirements, the radio must be installed with one of several approved antenna types listed in this document.
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 7 of 25 1.4 Abbreviations & Definitions The term Honeywell Multinode Device (or simply Multinode) will be used to describe the composite unit which includes the Honeywell DSSS or FHSS Radio Board, 3eTI Mesh Board, Power Supply board, and all subassemblies housed inside the Multinode enclosure. ACMA Australian Communications and Media Authority ATEX Potentially Explosive Atmospheres Directive AWG American Wire Gauge Co-located Two or more radios transmitting simultaneously and with less than 20cm of separation distance. COTS Commercial Off-The-Shelf CSA Canadian Standards Association DFS Dynamic Frequency Selection DSSS Direct Sequence Spread Spectrum EMC Electromagnetic Compatibility ETSI European Telecommunications Standards Institute EU European Union FCC Federal Communications Committee FHSS Frequency-Hopping Spread Spectrum FM Factory Mutual IC Industry Canada IEEE Institute of Electrical and Electronics Engineers IR Infrared IrDA Infrared Data Association LED Light Emitting Diode MPE Maximum Permissible Exposure MTBF Mean Time Between Failures NEMA National Electrical Manufacturers Association PCB Printed Circuit Board PCI Peripheral Components Interconnect RAM Random Access Memory RJ-45 Registered Jack-45 RPN Reverse Polarity N-type SQA Supplier Quality Assurance Wi-Fi Wireless Local Area Network based on IEEE 802.11 Specifications WNSIA Wireless Network for Secure Industrial Application Table 2 –Table of Abbreviations and Definitions
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 8 of 25 2 FEDERAL COMMUNICATION COMMISSION (FCC) 2.1 FCC Compliance Statements ¾ This device complies with Part 15 of FCC Rules and Regulations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. ¾ This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. ¾ Intentional or unintentional changes or modifications must not be made to the Multinode unless under the express consent of the party responsible for compliance. Any such modifications could void the user’s authority to operate the equipment and will void the manufacturer’s warranty. 3 INDUSTRY CANADA (IC) 3.1 IC Compliance Statements ¾ To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropic radiated power (EIRP) is not more than that permitted for successful communication. ¾ Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. ¾ This Class A digital apparatus complies with Canadian ICES-003. ¾ French: Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 9 of 25 4 RF Safety Statement: To comply with FCC’s and Industry Canada’s RF exposure requirements, the following antenna installation and device operating configurations must be satisfied. . ¾ When using integral or remote antenna(s) the FDAP unit must be fixed and mounted on outdoor permanent structures and the antennas must not be co-located with any other antenna or transmitter device and have a separation distance of at least 20cm from all persons.
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 10 of 25 5 FCC and Industry Canada (IC) Identification Numbers: 5.1 FCC Identification Numbers: • Honeywell FDAP DSSS Radio o Limited Modular Approval o Federal Communication Commission Identification: S57 – 51306533 5.2 Industry Canada Identification Numbers: • Honeywell FDAP DSSS Radio o Limited Modular Approval o Industry Canada Identification: 573I - 51306533
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 11 of 25 6 INTENDED COUNTRY USAGE 6.1 NORTH AMERICA Country ISO 3166 2 letter code UNIIITED STATES US CANADA CA 6.2 AUSTRALIA AND NEW ZEALAND Country ISO 3166 2 letter code AUSTRALIA AU NEW ZEALAND NZ 6.3 EUROPEAN UNION Country ISO 3166 2 letter code Country ISO 3166 2 letter code Austria AT Latvia LV Belgium BE Liechtenstein LI Bulgaria BG Lithuania LT Cyprus CY Malta MT Czech Republic CZ Netherlands NL Denmark DK Norway NO Estonia EE Poland PL Finland FI Portugal PT France FR Romania RO Germany DE Slovakia SK Greece GR Slovenia SI Hungary HU Spain ES Iceland IS Sweden SE Ireland IE Switzerland CH Italy IT United Kingdom BG
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 12 of 25 7 MULTINODE GENERAL DESCRIPTION 7.1 Intended Use The Field Device Access Point (FDAP) is a key component of the Honeywell OneWireless system, a secure wireless network for industrial applications. It is a ruggedized industrial radio intended for use in hazardous locations to provide wireless connectivity for wireless sensor networks. As a wireless router, the FDAP provides connectivity between the wired DCS network and wireless field devices. The FDAP radio uses IEEE 802.15.4 Direct Sequence Spread Spectrum (DSSS) technology and is compliant with ISA 100.11a open-standard wireless networking technology. The FDAP is designed to be a standalone, pole or wall mounted unit. It is intrinsically-safe device and suitable for use in Class I, Division 1 and Zone 1 hazardous locations. 7.2 FDAP Device Diagrams Figure 1 shows the unit-level drawing of the FDAP Device. All cables exit the unit via a 1/2” conduit hub. The conduit hub allows end user to land conduit on the FDAP Device. Figure 1 shows the FDAP and all of external interfaces. Figure 1 –Diagram of FDAP Unit showing various external attributes
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 13 of 25 8 PRODUCT SPECIFICATIONS 8.1 Direct Sequence Spread Spectrum (DSSS) Radio, 2.4GHz Warning! The FDAP unit must be Professionally Installed in accordance with the requirements specified in this document. See Section 12, for professional installation maximum power setting requirements. Only the specified power settings, antenna types and gains and cable lengths (attenuation) as outlined in this document are valid for FDAP installations. Table 3 – Specifications of DSSS Radio in FDAP Device. Item Specification Wireless Standard Direct Sequence Spread Spectrum 2.4GHz Data Rates and Modulation Data Rate: 250kbps Modulation: OQPSK – DSSS Frequency Band 2,405 – 2,475MHz Transmit Power Maximum: 18dBm (Maximum transmit power will vary by channel and individual country regulations. Receive Sensitivity (typical) -97dBm
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 14 of 25 8.2 FDAP User Environment Item SpecificationOperating Temperature: -40 OC to +75 OC Storage Temperature: -40 OC to +75 OC Operating Humidity: 0 to 100% RH Table 4 – Specifications User Environment FDAP Device. 8.3 FDAP Power Specifications Item SpecificationDC Operating Voltage: 24VDC, +10%/-15% AC Operating Voltage: 85 – 264VAC, 50/60Hz Power Consumption (typical): 2W Table 5 – Power Specifications FDAP Device.
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 15 of 25 8.4 Antenna Cables Cable Application Honeywell Part # Cable Type Connector Type Frequency (GHz) Length (m) Loss (dB) DSSS, FHSS, 802.11 50018278-001 400 Series NM – NM 2.4/5.8 1 1.0 / 2.0DSSS, FHSS, 802.11 50018278-003 400 Series NM – NM 2.4/5.8 3 1.5 / 2.5DSSS, FHSS, 802.11 50018278-010 400 Series NM – NM 2.4/5.8 10 2.5 / 3.5Table 6 - Antenna Cable Specifications for Multinode Device. 9 Antenna Lightning Arrestors 9.1 For use with Integral or Remote Antenna(s) Application Honeywell Part Number Specification Connector Type Frequency (GHz) Attenuation(dB) DSSS, FHSS, 802.11 51202359-200 50 ohm NM - NF 0 – 6 0.4 (max) Table 7 – Lightning Arrestor Specifications for Integral Antenna(s) 9.2 For use with Remote Antenna(s) Application Honeywell Part Number Specification Connector Type Frequency (GHz) Attenuation (dB) DSSS, FHSS, 802.11 50018279-090 50 ohm NF to NF 0 – 3 0.4 (max) NOTE: Depending on application needs, the “integral” arrestors may be used for remote antennas. Table 8 – Lightning Arrestor Specifications for Remote Antenna(s)
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 16 of 25 10 Approved Antenna Types/Gains This radio transmitter (FCC ID: S57 – 51306533, IC: 573I - 51306533) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna Type Antenna Application Manufacturer Manufacturer Part Number Honeywell Beam Width Peak Gain (dBi) Freq. Part Number (GHz) Omni Point to Multi-Point PacWireless OD24M-5 51506534-101 Omni 5 2.4 (integral) Omni Point to Multi-Point SMARTANT SAA04-051000 51506534-101 Omni 5 2.4 (integral) Omni Point to Multi-Point SMARTANT HON04-052160 51506534-100 Omni 5 2.4 (integral) Omni Point to Multi-Point HUBER + SUHNER 1324.17.0047 NA Omni 6 2.4 (integral) Omni Point to Multi-Point L-com HGV-2409U 50018414-001 Omni 8 2.4 (remote) Sector Point to Multi-Point L-com HG2414SP-120 NA 120° 14 2.4 (remote) Patch-RHC Point to Multi-Point L-com HG2409PCR-NF NA 65° 8 2.4 (remote) Patch-LHC Point to Multi-Point L-com HG2409PCL-NF NA 65° 8 2.4 (remote) Table 9 – Approved Antenna Types and Gains
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 17 of 25 11 Equivalent Isotropically Radiated Power (EIRP) In radio communication systems, Equivalent isotropically radiated power (EIRP), or alternatively, Effective isotropic radiated power is the amount of power that would have to be emitted by an isotropic antenna (that evenly distributes power in all directions and is a theoretical construct) to produce the peak power density observed in the direction of maximum antenna gain. EIRP can take into account the losses in transmission line and connectors and includes the gain of the antenna. The EIRP is often stated in terms of decibels over a reference power level, that would be the power emitted by an isotropic radiator with an equivalent signal strength. The EIRP allows making comparisons between different emitters regardless of type, size or form. From the EIRP, and with knowledge of a real antenna's gain, it is possible to calculate real power and field strength values. EIRP(dBm) = (Radio Power (dBm)) – (Cable Loss (dB)) + (Antenna Gain(dBi)) Antenna gain is expressed relative to a (theoretical) isotropic reference antenna (dBi).
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 18 of 25 12 EIRP LIMITS, DSSS 2.4GHz RADIO 12.1 FCC, IC, ACMA This radio transmitter (FCC ID: S57 – 51306533, IC: 573I - 51306533) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna Type Radio Usage / Application Freq. (GHz) Max. Ant. Gain (dBi) Min. Cable Length (m) Min. Cable Loss (dB) Max. Radio Output Power (dBm) Max. EIRP (dBm) Agency/ Country Omni Point to Multi-Point Integral 2.4 6 0 0 18 24 FCC, IC, ACMA Omni Point to Multi-Point Remote 2.4 8 1 1.0 18 25 FCC, IC, ACMA Patch Point to Multi-Point Remote 2.4 8 1 1.0 18 25 FCC, IC, ACMA Sector Point to Multi-Point Remote 2.4 14 1 1.0 18 31 FCC, IC, ACMA Notes: 1. The values in the above table have been determined through agency certification testing. 2. Maximum transmit power will vary by channel, data rate, and individual country regulations. 3. The following shall apply for antenna type, frequency range, application/usage and agency/country compliance: • Antenna gains above the maximum values shown shall not be used. • Cable length/loss below the minimum values shown shall not be used. • Maximum overall radio output power shown shall not be exceeded. • Maximum EIRP values shown above shall not be exceeded. 4. Beam width, for sector and dish antenna, may range between 0 – 180degress. 5. Industry Canada Compliance Statement: This device has been designed to operate with the antenna types listed in this document, and having a maximum gain of 14dBi. Antenna types not included in this list or having a gain greater than 14dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. Table 10 – EIRP Limits, DSSS 2.4GHz Radio
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 19 of 25 12.2 ETSI Antenna Type Radio Usage / Application Freq. (GHz) Max. Ant. Gain (dBi) Min. Cable Length (m) Min. Cable Loss (dB) Max. Radio Output Power (dBm) Max. EIRP (dBm) Agency/ Country Omni Point to Multi-Point Integral 2.4 5 0 0 3.7 8.7 ETSI5 Omni Point to Multi-Point Integral 2.4 6 0 0 3.2 9.2 ETSI5 Omni Point to Multi-Point Remote 2.4 8 10 2.5 3.7 9.2 ETSI5 Patch Point to Multi-Point Remote 2.4 8 10 2.5 3.7 9.2 ETSI5 Sector Point to Multi-Point Remote 2.4 14 10 2.5 -2.8 8.7 ETSI5 Notes: 1. The values in the above table have been determined through agency certification testing. 2. Maximum transmit power will vary by channel, data rate, and individual country regulations. 3. The following shall apply for antenna type, frequency range, application/usage and agency/country compliance: • Antenna gains above the maximum values shown shall not be used. • Cable length/loss below the minimum values shown shall not be used. • Maximum overall radio output power shown shall not be exceeded. • Maximum EIRP values shown above shall not be exceeded. 4. Beam width, for sector and dish antenna, may range between 0 – 180degress. 5. France restricts outdoor use to 10mW (10dBm) EIRP in the frequency range of 2,454-2,483.5 MHz. Installations in France must limit EIRP to 10dBm, for operating modes utilizing frequencies in the range of 2,454 – 2,483.5MHz. Table 11 – EIRP Limits, DSSS 2.4GHz Radio
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 20 of 25 13 Setting Power and Country Code: DSSS Radio TBD
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 21 of 25 14 RF Safety, Maximum Permissible Exposure (MPE) statement To comply with FCC’s and Industry Canada’s RF exposure requirements, the following antenna installation and device operating configurations must be satisfied. . ¾ When using integral or remote antenna(s) the FDAP unit must be fixed and mounted on outdoor permanent structures and the antennas must not be co-located with any other antenna or transmitter device and have a separation distance of at least 20cm from all persons.
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 22 of 25 15 AGENCY COMPLIANCE 15.1 Radio and EMC Certifications 15.1.1 Federal Communication Commission (FCC) ¾ Specification: FCC Part 15.247 Subpart B for unintentional radiators ¾ Specification: FCC Part 15.247 Subpart C for intentional radiators 15.1.2 Industry Canada (IC) ¾ Method: RSS-210, Issue 7 ¾ RSS-Gen, Issue 2 ¾ ICES-003, Issue 4 15.1.3 European Telecommunications Standards Institue (ETSI) ¾ Emissions Specification and Method: EN 300 328 V1.7.1 ¾ Immunity Specification: EN 301 489-17 V2.1.1 ¾ Immunity Method: EN 301 489-1 V1.8.1 ¾ Product Standard: IEC61326-1 (1st Edition, 2005, Industrial Locations) 15.1.4 Australian communications and media authority (ACMA) ¾ Specification: AS/NZS 4268
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 23 of 25 15.2 Product Safety Agency Certifications 15.2.1 Canadian Standards Association (CSA) CSA electrical equipment requirements for use within Division 2 and Zone 2 hazardous locations. IEC61010-1 (2nd Edition, 2001-02), "Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use, part 1: General Requirements Canadian Standards Association Standard C22.2 No. 213-M1987, "Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations" Canadian Standards Association Standard E60079-0:02, “Electrical Apparatus for explosive gas atmospheres – General Requirements” Canadian Standards Association Standard E60079-15:02, “Electrical Apparatus for explosive gas atmospheres – Type of Protection “n”” • Temperature code: T4 (135°C) based on the maximum specified ambient of 60°C.
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 24 of 25 15.2.2 Factory Mutual (FM) FM electrical equipment requirements for use within Division 2 and Zone 2 hazardous locations. Factory Mutual Approval Standard Class No. 3600, "Electrical Equipment for Use in Hazardous (Classified) Locations - General Requirements Factory Mutual Approval Standard Class No. 3810, "Electrical and Electronic Test, Measuring, and Process Control Equipment Factory Mutual Approval Standard Class No. 3611, "Electrical Equipment for Use in Class I, Division 2, Class II, Division 2 and Class III, Division 1 and 2 Hazardous (Classified) Locations ANSI/ISA 12.00.01-2002, “Electrical Apparatus for Use in Class I, Zones 0, 1 & 2 Hazardous (Classified) Locations: General Requirements” ANSI/ISA 12.12.02-2003, “Electrical Apparatus for explosive gas atmospheres – Type of Protection “n”” • Temperature code: T4 (135°C) based on the maximum specified ambient of 60°C.
Honeywell Process Solutions 51154689 AT1 REVISIONS FCF: OneWireless Field Device Access Point (FDAP) RF Regulatory Compliance Guide Honeywell FMF: IACD/Ft.W Made by: D.S. Approval Prints to A 51154689 Issue: 2010-11-30 SIZE Sh. No.: 25 of 25 15.2.3 European ATEX Certification (ATEX) The completely assembled Multinode will conform to European electrical equipment requirements for use within Zone 2 Hazardous Locations. IEC 60079-0:2004-01, “Electrical Apparatus for explosive gas atmospheres – General Requirements IEC 60079-15:2005-03, “Electrical Apparatus for explosive gas atmospheres – Type of Protection “n” • Temperature code: T4 (135°C) based on the maximum specified ambient of 60°C. 15.3 European Union Certification (CE-mark) • Compliance with: o R&TTE Directive 1999/5/EC o EMC Directive 2004/108/EC o LVD Directive 73/23/EEC o ATEX Directive 94/9/EC 16 Reference Documents 1 OneWireless Field Device Access Point User's Guide 2 Field Device Access Point Specification Release 200 EP03-640-200, August 2010 3 4 5 6 7 8

Navigation menu