Honeywell 760005 Handheld Computer with BT User Manual Dolphin 7600 WM6 User s Guide Rev A
Honeywell International Inc Handheld Computer with BT Dolphin 7600 WM6 User s Guide Rev A
User Manual
® Dolphin 7600 Mobile Computer with Windows Mobile® 6.0 User’s Guide–Preliminary Disclaimer Honeywell International Inc. (“Honeywell”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Honeywell to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of Honeywell. Honeywell shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of Honeywell. ©2008 Honeywell International Inc. All rights reserved. Web Address: www.honeywell.com/aidc Trademarks Dolphin, Dolphin RF, HomeBase, Mobile Base, and QuadCharger are trademarks or registered trademarks of Hand Held Products, Inc. or Honeywell International Inc. Microsoft, Windows, Windows Mobile, Windows CE, Windows NT, Windows 2000, Windows ME, Windows XP, ActiveSync, Outlook, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are the property of their respective owners. Patents Please refer to the product packaging for a list of patents. Other Trademarks The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to Honeywell International Inc. microSD and microSDHC are trademarks. Table of Contents Chapter 1 - Agency Approvals Label Locations ....................................................................................................................1-1 Approvals by Country...........................................................................................................1-2 R&TTE Compliance Statement—802.11b/g and/or Bluetooth .............................................1-2 Dolphin RF Terminal—802.11b/g, Bluetooth, ......................................................................1-3 Chapter 2 - Getting Started Out of the Box ......................................................................................................................2-1 Today Screen.......................................................................................................................2-2 Navigation Bar and Start Menu ............................................................................................2-2 Icons in the Navigation Bar ............................................................................................2-3 Command Bar ......................................................................................................................2-4 Selecting Programs..............................................................................................................2-5 Using the Stylus ...................................................................................................................2-5 Chapter 3 - Hardware Overview Standard Configurations ......................................................................................................3-1 Hardware Features ........................................................................................................3-1 Peripherals ...........................................................................................................................3-2 Accessories..........................................................................................................................3-2 Front Panel Features ...........................................................................................................3-3 Touch Screen Display ..........................................................................................................3-4 Display Backlight............................................................................................................3-4 Using Screen Protectors ................................................................................................3-4 Back Panel Features..........................................................................................................3-10 Using the Accessory Attachment .................................................................................3-11 Side Panel Features ..........................................................................................................3-12 Installing Memory Cards ..............................................................................................3-13 Bottom Panel Features ......................................................................................................3-15 Connecting the USB Cable ..........................................................................................3-16 ActiveSync Communication ...............................................................................................3-18 Battery Power ....................................................................................................................3-21 Checking Battery Power...............................................................................................3-24 Resetting the Terminal .......................................................................................................3-25 Soft Reset (Warm Boot) ...............................................................................................3-25 Hard Reset (Cold Boot)................................................................................................3-25 Suspend Mode ...................................................................................................................3-26 Chapter 4 - Using the Keyboards Overview ..............................................................................................................................4-1 29-Key Numeric Keyboard .............................................................................................4-1 38-Key Alpha Keyboard .................................................................................................4-1 Suspend/Resume...........................................................................................................4-1 Function Keys ................................................................................................................4-2 Modifier Keys .................................................................................................................4-2 Alpha/Numeric Indicator.................................................................................................4-3 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 iii 29-Key Numeric Keyboard .................................................................................................. 4-4 Navigation Keys............................................................................................................. 4-4 Hardware Application Buttons ....................................................................................... 4-5 Toggling Between Alpha and Numeric Modes............................................................... 4-6 29-Key Blue Key Combinations (Alpha Mode) .............................................................. 4-7 29-Key Shift Functionality in Numeric Mode.................................................................. 4-7 29-Key Red Key Combinations...................................................................................... 4-8 38-Key Alpha Keyboard..................................................................................................... 4-10 Toggling Between Alpha and Numeric Modes............................................................. 4-10 38-Key Red Key Combinations.................................................................................... 4-11 38-Key NUM Lock Mode ............................................................................................. 4-12 Chapter 5 - Using the Image Engine Overview.............................................................................................................................. 5-1 Available Engines ................................................................................................................ 5-1 Supported Bar Code Symbologies ..................................................................................... 5-2 Activating the Engine........................................................................................................... 5-3 Decoding ............................................................................................................................. 5-3 Capturing Images ................................................................................................................ 5-5 Chapter 6 - System Settings Overview.............................................................................................................................. 6-1 Personal Tab ....................................................................................................................... 6-2 Buttons........................................................................................................................... 6-3 Input............................................................................................................................... 6-4 Menus ............................................................................................................................ 6-5 System Tab ......................................................................................................................... 6-7 About ............................................................................................................................. 6-7 Backlight ........................................................................................................................ 6-8 Certificates..................................................................................................................... 6-8 ClearType Tuner............................................................................................................ 6-8 Clock & Alarms .............................................................................................................. 6-9 Encryption...................................................................................................................... 6-9 Error Reporting .............................................................................................................. 6-9 External GPS ............................................................................................................... 6-10 Memory........................................................................................................................ 6-10 Power........................................................................................................................... 6-12 Regional Settings......................................................................................................... 6-12 Remove Programs....................................................................................................... 6-13 Screen ......................................................................................................................... 6-14 Chapter 7 - Connecting the Terminal Connections Tab ................................................................................................................. 7-1 Infrared Communication ...................................................................................................... 7-2 IrDA Port Location ........................................................................................................ 7-2 Sending Data ................................................................................................................. 7-2 Receiving Data .............................................................................................................. 7-3 iv Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Connections Manager ......................................................................................................... 7-4 Task Tab........................................................................................................................ 7-4 Advanced Tab................................................................................................................ 7-5 Dolphin Wireless Manager .................................................................................................. 7-6 Dolphin Wireless Manager Window............................................................................... 7-6 Enabling the Radios....................................................................................................... 7-6 Accessing Radio Configuration Utilities ......................................................................... 7-7 Icons in the Navigation Bar............................................................................................ 7-7 COM Port Assignment Table .............................................................................................. 7-8 Network Cards..................................................................................................................... 7-9 USB to PC ......................................................................................................................... 7-10 Installing Additional Software ............................................................................................ 7-11 Adding Programs via ActiveSync................................................................................. 7-11 Adding Programs From the Internet ............................................................................ 7-12 Chapter 8 - Working with the Bluetooth Radio Enabling the Bluetooth Radio .............................................................................................. 8-1 Icons in the Navigation Bar............................................................................................ 8-1 Connecting to Other Bluetooth Devices .............................................................................. 8-2 Pairing and Trusted Devices ............................................................................................... 8-4 Types of Devices and Services ........................................................................................... 8-5 Connecting to Bluetooth Printers......................................................................................... 8-6 Connecting to Bluetooth Headsets ...................................................................................... 8-6 Transferring Files................................................................................................................. 8-7 Making the Terminal Discoverable ...................................................................................... 8-8 Chapter 9 - Dolphin HomeBase Device Overview.............................................................................................................................. 9-1 Front Panel ......................................................................................................................... 9-2 Back Panel ......................................................................................................................... 9-3 Powering the HomeBase Device......................................................................................... 9-4 Charging the Main Battery................................................................................................... 9-5 Mounting the Dolphin HomeBase Device............................................................................ 9-6 Bottom Panel Dimensions ................................................................................................... 9-7 Chapter 10 - Dolphin QuadCharger Device Overview............................................................................................................................ 10-1 Front Panel ....................................................................................................................... 10-1 Back Panel ........................................................................................................................ 10-2 Supplying Power to the QuadCharger Device................................................................... 10-2 Battery Charging................................................................................................................ 10-3 Recommendations for Storing Batteries............................................................................ 10-3 Mounting the QuadCharger Device ................................................................................... 10-4 Troubleshooting................................................................................................................. 10-6 Chapter 11 - Dolphin Mobile Mount Overview............................................................................................................................ 11-1 Inserting a Terminal ..................................................................................................... 11-1 Mounting............................................................................................................................ 11-3 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 Chapter 12 - Technical Specifications Terminal Technical Specifications ..................................................................................... 12-1 Dolphin HomeBase Device................................................................................................ 12-3 Dolphin QuadCharger Device............................................................................................ 12-5 Chapter 13 - Customer Support Product Service and Repair............................................................................................... 13-1 Technical Assistance......................................................................................................... 13-2 Limited Warranty ............................................................................................................... 13-3 vi Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 1 Agency Approvals Label Locations Dolphin 7600 terminals meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency guidelines that follow. Please read these guidelines carefully before using your Dolphin terminal. Compliance Label Molded-in Text (see page 1-1) Molded-in Text This Class B Digital Device Complies with Canadian ICES-003. Cet appareil numerique de la Classe B est conforme a la norme NMB-003 du Canada. See Manual Laser Safety Label If the following label is attached to your product, it indicates the product LASER LIGHT. DO NOT STARE INTO BEAM contains a laser engine or laser aimer: CLASS 2 LASER PRODUCT 1.0 mW MAX OUTPUT: 650nM IEC60825-1:1993+A1+A2 Laser Eye Safety Statement: This device has been tested in accordance Complies with 21 CFR 1040.10 and 1040.1 1 with and complies with IEC60825-1: 1993+A1+A2 and 21 CFR 1040.10 and except for deviations pursuant to Laser Notice No. 50, dated July 26, 2001. 1040.11, except for deviations pursuant to Laser Notice No. 50, dated July 26, 2001. LASER LIGHT, DO NOT STARE INTO BEAM, CLASS 2 LASER PRODUCT, 1.0 mW MAX OUTPUT: 650nM. Caution - use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. LED Safety Statement The LED output on this device has been tested in accordance with IEC60825-1 LED safety and certified to be a Class 1 LED device. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. Max. SAR Measurement (1g): • 802.11b: 0.234w/kg • 802.11g: 0.234w/kg This device has been tested and meets the FCC RF exposure guidelines for body worn operation only. An accessory must be used for body worn operation. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 1-1 Approvals by Country Country Safety EMC & Radio U.S.A. UL60950-1 (CB Scheme) FCC Part 15, Subpart C, 15.247 FCC Part 15, Subpart B FCC Part 22H FCC Part 24H FCC SAR OET 65 Supplement C Canada cUL60950 ICES-003 (Class B) RSS 132 RSS 133 European Community/CE EN60950-1:2000 EN60825-1:1994 + A11 + A2 IEC60825-1 EN 300328-1/2 EN55022:1998+A1:2000+A2:2003 EN55024:1998+A1:2001+A2:2003 EN301 511 EN301 489-1/-7 EN301 489-17 EN61000-3-2:2000 EN61000-3-3:1995+A1-2001 EN60360 June 2001 EN50361 June 2001 EN50371 June 2001 R&TTE Compliance Statement—802.11b/g and/or Bluetooth Dolphin RF terminals are in conformity with all essential requirements of the R&TTE Directive (1999/5/ EC). This product is marked with [Certified Notified Body Number] in accordance with the Class II product requirements specified in the R&TTE Directive. In addition, this product complies to 2006/95/EC Low Voltage Directive when supplied with the recommended power supply. Honeywell shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive. The equipment is intended for use throughout the European Community; PAN European Frequency Range: 2.402–2.480 GHz. Restrictions for use in France are as follows: • Indoor use: Maximum power (EIRP*) of 100 mW for the entire 2.400–2.4835 GHz • Outdoor use: Maximum power (EIRP*) of 100 mW for the 2.400–2.454 GHz band & maximum power (EIRP*) of 10 mW for the 2.454–2.483 MGHz band. For further information, please contact: Hand Held Products BV, a wholly owned subsidiary of Honeywell International Inc. Nijverheidsweg 9 5627 BT Eindhoven The Netherlands 1-2 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Dolphin RF Terminal—802.11b/g, Bluetooth, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful: “Something About Interference.” This is available at FCC local regional offices. Our company is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by our company. The correction is the responsibility of the user. Use only shielded data cables with this system. In accordance with FCC 15.21, changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION! Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. Canadian Compliance This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) installed outdoors is subject to licensing. Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. For European Community Users Honeywell complies with Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE). Waste Electrical and Electronic Equipment Information This product has required the extraction and use of natural resources for its production. It may contain hazardous substances that could impact health and the environment, if not properly disposed. In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems for product disposal. Those systems will reuse or recycle most of the materials of the product you are disposing in a sound way. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 1-3 The crossed out wheeled bin symbol informs you that the product should not be disposed of along with municipal waste and invites you to use the appropriate separate take-back systems for product disposal. If you need more information on the collection, reuse, and recycling systems, please contact your local or regional waste administration. You may also contact your supplier for more information on the environmental performances of this product. Pacemakers, Hearing Aids and Other Electrically Powered Devices Most manufacturers of medical devices adhere to the IEC 601-1-2 standard. This standard requires devices to operate properly in an EM Field with a strength of 3V/m over a frequency range of 26 to 1000MHz. The maximum allowable field strength emitted by the Dolphin is 0.3V/m according to Subpart B of Part 1 of the FCC rules. Therefore, the Dolphin RF has no effect on medical devices that meet the IEC specification. Microwaves The radio in the Dolphin RF terminal operates on the same frequency band as a microwave oven. Therefore, if you use a microwave within range of the Dolphin RF terminal you may notice performance degradation in your wireless network. However, both your microwave and your wireless network will continue to function. The Dolphin Batch terminal does not contain a radio, and therefore, is not affected by microwave ovens. 1-4 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 2 Getting Started Out of the Box Verify that your carton contains the following items: • Dolphin 7600 mobile computer (the terminal) • Main battery pack (3.7v, Li-ion) • AC power supply • Localized plug adapters • User CD Note: Be sure to keep the original packaging in case you need to return the Dolphin terminal for service; see Product Service and Repair on page 13-1. Step 1. Install the Main Battery Use only the Li-ion battery packs provided by Honeywell. Use of any battery not sold/manufactured by Honeywell may result in damage not covered by the warranty. Step 2. Charge the Batteries Dolphin terminals ship with both the main battery pack and internal backup battery significantly discharged of power. Charge the main battery pack with the charging cable for a minimum of four hours before initial use. 1. Attach the appropriate plug adapter to the plug of the power cable. 2. Plug the *power cable into the DC Power Jack (see page 3-12) on the left side. 3. Insert the plug into the appropriate power source. *This power cable can also be used to power the Dolphin HomeBase Device (see page 9-1). Power Cable Use only the peripherals, power cables, and power adapters from Honeywell. Use of peripherals, cables, or power adapters not sold/manufactured by Honeywell may cause damage not covered by the warranty. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 2-1 Step 3. Boot the Terminal The terminal begins booting as soon as power is applied and runs by itself. Do NOT press any keys or interrupt the boot process. Only tap the screen when prompted. When the boot process is complete, the Today Screen (see page 2-2) appears and the terminal is ready for use. Today Screen System resets (see Resetting the Terminal on page 3-25) complete on the Today screen. Note: You can access the Today screen any time by tapping the Start button on the Navigation bar and selecting Today in the drop-down list. Navigation Bar and Start Menu Located at the top of every window, the Navigation bar displays various icons representing various system functions. Navigation Bar Start Menu The icons in the table below may appear in the Navigation bar. Which icons appear depend on your terminal’s configuration. 2-2 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Icons in the Navigation Bar Indicator Meaning The terminal could not synchronize data with the workstation via ActiveSync New e-mail or text message (SMS) New voicemail New instant message Ringer off Voice call Voice call in progress Calls are forwarded Call on hold Missed call Data call in progress Battery levels (1–4). Tap this icon to open the Power system setting and see the charge percentage (see page 6-12). Critical battery. The charge percentage is at the critical battery point set in the registry (the default is 10%). For details about the critical battery point, (see page 3-22). Tap this icon to open the Power system setting and see the charge percentage (see page 612). Terminal is running on external power (If a battery pack is installed, that battery is charging.) The terminal is not connected to external power. A battery is installed but is defective; specifically, its charge level cannot be measured. No SIM card is installed GPRS available GPRS connected EDGE available EDGE connected Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 2-3 Icons in the Navigation Bar Indicator Meaning Roaming Radio is disabled The radio is not connected to a network Radio connected No radio signal The terminal is searching for a signal Radio signal strength Wi-Fi on Wi-Fi data call Pending alarm Bluetooth Command Bar Located at the bottom of the Today screen, the command bar displays running applications. This area displays various icons that access applications running on the terminal. Use the right and left arrows to navigate through these icons. 2-4 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Selecting Programs Tapping Start opens the drop-down menu, which provides access to the most common system functions and programs. To open a program, tap Start > Programs. Then, tap the program icon on the menu. Using the Stylus The terminal comes with a stylus inserted into the Stylus Slot (see page 3-10), Use this stylus (or your finger) to select or enter information on the touch screen. The stylus functions as a mouse; generally, a tap is the same as a click. Tap Tap the touch screen once to open menu items and select options. Drag Hold the stylus on the screen and drag across the screen to select text and images. Tap & hold Tap and hold the stylus on an item and a pop-up menu appears. On the pop-up menu, tap the action of the task you want to perform. Use of other objects other than the stylus, such as paper clips, pencils, or ink pens can damage the touch screen and may cause damage not covered by the warranty. For more information about the touch screen, see Touch Screen Display on page 3-4. Using File Explorer Use File Explorer to navigate through the files on your terminal. Tap Start > Programs > File Explorer. Move files by tapping and holding on the file, then tapping Cut, Copy or Paste on the pop-up menus that appear. Pop-Up Menus With pop-up menus, you can quickly choose an action for an item. 1. Tap and hold the stylus on the item name. The pop-up menu appears. 2. Lift the stylus, and tap the action you want to perform. Note: The contents of pop-up menus change according to the program you’re in. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 2-5 2-6 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 3 Hardware Overview Standard Configurations WPAN / WLAN WPAN • • • • • • • • • • • • • Windows Mobile 6.0 Classic Samsung 2440 400 MHz 128MB RAM X 128 MB (non-volatile) Memory 29-key numeric keyboard or 38-key alpha keyboard 2.8” 1/4 VGA TFT color display Li-ion battery: 3.7V / 3240 mAh / 12.0 Wh 5300SR image engine Bluetooth and 802.11b/g radios Power cable (included in each box) • • • • • Windows Mobile 6.0 Classic Samsung 2440 400 MHz 128MB RAM X 128 MB (non-volatile) Memory 29-key numeric keyboard or 38-key alpha keyboard 2.8” 1/4 VGA TFT color display Li-ion battery: 3.7V / 3240 mAh / 12.0 Wh 5300SR image engine Bluetooth radio Power cable (included in each box) Hardware Features See • • • • Front Panel Features on page 3-3 Back Panel Features on page 3-10 Side Panel Features on page 3-12 Bottom Panel Features on page 3-15 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 3-1 Peripherals The following items are sold separately and enhance your terminal’s capabilities. For information about how to purchase these items, contact a Honeywell sales representative. Dolphin HomeBase™ Device The Dolphin HomeBase device is a charging and communication cradle. There are two versions of this device: one that supports USB and another that supports RS-232 communication. These two options enable your terminal to interface with the majority of PC-based enterprise systems. When a terminal is seated in a powered HomeBase device, its main battery pack charges in less than four hours. For more information, see Dolphin HomeBase Device on page 9-1. Dolphin QuadCharger™ Device The Dolphin QuadCharger device is a four-slot charging station for Li-ion battery packs that can charge each battery in less than four hours. For more information, see Dolphin QuadCharger Device on page 10-1. Accessories Each of the following items is sold separately to enhance your Dolphin terminal’s capabilities. Protective Enclosure This enclosure wraps around the terminal to protect it from wear and tear. Li-ion Battery Packs The available Li-ion battery packs provide the main power supply for the terminal. For more information, see Battery Power on page 3-21. 3-2 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Front Panel Features Decode LED Scan LED 1/4 VGA Touch Screen Display (screen protector installed at the factory) Microphone Hardware Application Buttons Keyboard (29-key numeric) Decode and Scan LEDs The Scan LED lights red when you press the Scan trigger in scanning applications. The Decode LED lights green when a scanned bar code is successfully decoded. Both LEDs are user-programmable. Hardware Application Buttons These hardware buttons appear only on the 29-key numeric keyboard and can be programmed to perform software functions available in the Buttons setting (see page 6-3). For more information about these buttons, see Hardware Application Buttons on page 4-5. Keyboard Keyboards are recessed within the housing to increase durability. There are two keyboard options available: one that defaults to numeric (shown above) and one that defaults to alpha. For information about using both keyboards, see Using the Keyboards on page 4-1. Microphone The integrated microphone can be used for voice recording and communication. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 3-3 Touch Screen Display The display is a 65,536-color LCD (Liquid Crystal Display) covered by a touch screen lens. The 2.8” 1/4 VGA (Video Graphic Array) is TFT (Thin Film Transistor) color, backlit, and the resolution is 240 x 320; see Display Backlight on page 3-4. Dolphin terminals ship with a screen protector already installed over the touch screen lens to help prevent damage to the touch screen. Do NOT remove this screen protector before initial use. Honeywell recommends using screen protectors, especially for applications that require highvolume interfacing with the touch screen. For more information, see Using Screen Protectors on page 3-4. For touch screen input, use the stylus included with the terminal or your finger. The method you choose depends on which one is most appropriate for your application. While there is a great deal of variation in different applications, for buttons or icons that are close together, you generally achieve greater accuracy with the stylus; see Using the Stylus on page 2-5. Use of objects, such as paper clips, pencils, or ink pens on the touch screen can damage the input panel and may cause damage not covered by the warranty. Display Backlight The touch screen display has a backlight that is programmed to turn off after a specified period of time that the terminal is idle. For details, see Backlight on page 6-8. Using Screen Protectors Honeywell defines proper use of the terminal touch panel display as using a screen protector and proper stylus. Screen protectors maintain the ongoing integrity (i.e., prevent scratching) of the touch panel, which is why their use is recommended for applications that require a high to medium level of interface with the touch panel. Honeywell continues to advocate the use of screen protectors on all Dolphin terminals. We recommend implementing a screen protector replacement program to ensure that screen protectors are replaced periodically when signs of damage/wear are noticeable. For general use, we recommend replacing the screen protector every thirty (30) days. However, replacement cycles vary according to the average level of touch panel use in your application. Replacement screen protectors can be purchased directly from Honeywell. Please contact a Honeywell sales associate for details. Honeywell also mandates use of a proper stylus, which is one that has a stylus tip radius of no less than 0.8mm. Use of the Honeywell stylus included with the terminal is recommended at all times. Honeywell warranty policy covers wear on the touch panel display for the first 12 months provided that a screen protector is applied and an approved stylus is used for the 12 month duration covered by the warranty. Removing the Screen Protector Dolphin terminals ship with a touch screen protector already installed. To replace the screen protector, you must remove the one already installed. 3-4 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 1. You will need a strong, flat, plastic card (a credit card, for example) to wedge under the existing screen protector. Note: If you have one, you can also use the small plastic squeegees designed for touch panels. 2. Press the Blue + Backlight keys to put the terminal in Suspend Mode (see page 3-26). 3. Carefully apply the flat edge of your plastic card to the upper right corner of the touch screen. Catch the edge of the screen protector and pull it up and away from the touch panel. Touch Panel Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 3-5 4. Wipe the screen with a clean, non-abrasive, lint-free cloth. Note: Use ionized air, if available, to blow additional dirt or particles off the touch panel. Installing Your Screen Protector When installing a new screen protector, use a flat plastic card (such as a credit card) to apply the screen protector smoothly and remove any air bubbles. Note: 1. 3-6 If you have one, use the small plastic squeegees designed for touch panels. Press the Blue + Backlight keys to put the terminal in Suspend Mode (see page 3-26). Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 2. Clean the touch panel thoroughly with a clean, non-abrasive, lint-free cloth. Make sure nothing is attached to the top of the touch panel. 3. Release the left edge of the releasing paper on the screen protector. 4. Align the exposed edge of the screen protector along the left edge of the touch panel. Make sure that it lies flush with edges of the touch panel. Note: 5. To reposition the screen protector, lift up gently and reapply. Use the card on top of the screen protector to it smooth out as you pull on the releasing paper. Touch Panel Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 3-7 6. Pull smoothly and evenly from left to right until the screen protector is applied. Press gently but firmly. Touch Panel 7. Use the card as necessary to smooth out any air pockets or bumps after application. Press gently but firmly. 8. Press the Backlight 9. Verify that the screen accepts input from the stylus as usual. If not, re-apply the screen protector. 10. Press the Blue 3-8 key to wake the terminal and check the touch panel with the stylus. + Backlight keys to put the terminal back in Suspend Mode (see page 3-26). Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 11. Clean the surface of the screen protector with a clean, non-abrasive, lint-free cloth. 12. Press the Backlight key to wake the terminal. 13. For maximum performance, recalibrate the screen. Tap Start > Settings > System tab > Screen > Align Screen. 14. Follow the instructions on the screen. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 3-9 Back Panel Features Image Engine Window Accessory Attachment Stylus Slot Rear Speaker Finger Saddle I/O Connector Accessory Attachment Use this button to attach accessories; see Using the Accessory Attachment on page 3-11. Finger Saddle This is a slightly depressed and angled area of the back panel that is designed to cradle or “saddle” your pointer finger while holding the terminal. This unique ergonomic design makes the terminal comfortable to hold and helps prevent you from accidentally dropping the terminal. Rear Speaker The integrated speaker sounds audio signals as you scan bar code labels and enter data but emits no ambient noise on system activity such as processor activity, memory access, radio traffic, etc. The speaker can also be used for playing sounds (e.g., WAV or MP3 files). Stylus Slot Dolphin terminals ship with a stylus inserted in the back panel. Store the stylus in this slot when you’re not using it. For details, see Using the Stylus on page 2-5. 3 - 10 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Using the Accessory Attachment The accessory attachment is a standard tab designed to fit universal accessories available for most cell phones. An accessory must be used for body worn operation. Attaching a Belt Clip The accessory attachment on the back panel fits universal swivel clips designed for belts or even pedestal mounts (not available from Honeywell). Simply insert the tab into the slot until you hear a click or follow the instructions that came with the clip or accessory. Attaching the Hand Strap The accessory attachment is also how you attach the hand strap available from Honeywell. 1. Remove the accessory attachment with a Phillips head screwdriver. 2. Thread the hand strap hook underneath. 3. Fasten the accessory attachment to the back panel. Keep in mind that the hand strap covers the battery. When you want to replace the battery, you will need to adjust the hand strap accordingly. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 3 - 11 Side Panel Features DC Power Jack Headset Jack IrDA Port Side Button Access Door Side Door Note: This graphic shows the left side of the terminal. Access Door This door covers the memory card slot. To increase memory, install a memory card in this slot. This terminal supports microSD™ and microSDHC™ memory cards. For details, see Installing Memory Cards on page 3-13. When closed, the access door seals the memory interface from moisture and particle intrusion thus preserving the terminal’s environmental rating. DC Power Jack The DC power jack receives external power from the power cable that comes in the box with the terminal. When connected to the power cable, the terminal is powered and the main battery pack is charging. For more information, about the power cable, see Connecting the Power Cable on page 3-17. Headset Jack This 2.5mm audio jack supports a headset with a mono speaker and microphone. IrDA Port The IrDA (Infrared Data Association) port communicates with IrDA-enabled devices such as PCs, printers, modems, or other Dolphin terminals. Maximum data transfer speed is 115 Kbps. For more information, see Infrared Communication on page 7-2. Side Button There is a button like this on both side panels. By default, these buttons wake the terminal from suspend mode unless you are in a scanning application, in which case, these buttons activate the image/scan engine. Scanning with the side buttons can be a more comfortable and therefore a more ergonomic alternative to pressing the SCAN key on the keyboard. These buttons can be programmed to launch applications from the Today screen. For more information about programming these buttons, see Customizing a Hardware Button on page 4-5. 3 - 12 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Side Door The rubber door on the left side panel provides access to the Headset and DC power jacks. When closed, the side door seals the terminal from moisture and particle intrusion thus preserving the terminal’s environmental rating. Installing Memory Cards This terminal supports microSD and microSDHC memory cards up to 4GB. To install an SD card, you must open the access door on the side panel (Side Panel Features, page 312). Access door removal requires a Torx 5 (T5). 1. Press the Blue 2. Place the terminal on a flat, secure surface with the keyboard face-down. 3. Use a T5 screwdriver to remove the screw on the micro-SD door. 4. Remove the access door. 5. Slide the micro-SD card in with the contacts facing up (away from the keyboard) and the flat, straight edge parallel to the top panel (with the imager). Note: + Backlight keys to put the terminal in Suspend Mode (see page 3-26). To remove an installed SD card while the access door is open, tap on the edge lightly to unlock the card; the card will pop out just enough for you to grab its edge and pull it out. Do NOT resume terminal operation while the access door is open! Operating the terminal while the access door is open may cause damage not covered by the warranty. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 3 - 13 6. Replace the access door and tighten the screw. The access door must be properly sealed before resuming terminal operation. Failure to seal the access door may cause damage not covered by the warranty. 7. Press the Backlight 8. To verify that the operating system recognizes the new memory card, Tap Start > Programs > File Explorer and navigate to the My Device\Storage Card folder. You should see the contents of the memory card displayed on the screen. 3 - 14 key to resume operation. Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Bottom Panel Features I/O Connector Hand Strap Slot Hand Strap Slot There is an adjustable, elastic hand strap available for purchase with the terminal. When installing the hand strap, you loop the elastic strip through this slot. For instructions, see Attaching the Hand Strap on page 3-11. I/O Connector The I/O mechanical connector is designed to work exclusively with peripherals and cables designed for the Dolphin 7600 terminal. This connector powers the terminal, charges the main battery, and facilitates communication. This connector supports full speed USB 1.1 communication (up to 12 Mbps) and RS-232 communications with a maximum speed of 115Kbps and seven baud rate settings. Through this connector, you can communicate with a host workstation via Microsoft ActiveSync; see ActiveSync Communication on page 3-18. The I/O connector supports the following signals: • • • • • • • • • • • • • Data Carrier Detect Received Data Transmitted Data Data Terminal Ready Signal GND Data Set Ready Request To Send Clear To Send Ring Indicator USB GND USB +5V USB D+ USB D- Note: Signals referenced are for a DTE device. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 3 - 15 Connecting the USB Cable Connect the USB cable to the I/O connector to facilitate USB communication between the terminal and host workstation. I/O Connector Host Workstation USB Cable *Power Port USB Connector *This is a communication-only cable until you plug the power cable into the power port. 3 - 16 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Connecting the Power Cable The power port on the back end of the USB connector fits the power cable that comes with each terminal. To charge the terminal while communicating, connect the power cable to the power port. Power Cable Power Port Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 3 - 17 ActiveSync Communication To synchronize, ActiveSync 4.5 or higher must be installed and configured for the appropriate communication type on the host workstation and the Dolphin terminal. Dolphin terminals ship with ActiveSync already installed. Therefore, if ActiveSync is already installed on the host workstation, you just need to connect the Dolphin terminal to the host workstation (via Dolphin peripheral) to initiate communication. If ActiveSync 4.5 or higher is not installed on the host workstation, install it from the Getting Started CD that came with the Dolphin terminal. Insert the CD into the CD-ROM drive of the host workstation and follow the directions on your screen. You can also download the most current version of ActiveSync from www.microsoft.com and install. When communicating via ActiveSync, your terminal is designed to be connected to the host workstation with a communication peripheral sold/manufactured by Honeywell, such as the charge/communication cable. Use of any peripheral not sold/manufactured by Honeywell may cause damage not covered by the warranty. Communication Types The terminal supports the following types of communication via ActiveSync through its I/O Connector (see page 3-15) on the bottom panel: USB The USB cable and hardware peripherals allow the terminal to communicate with a workstation or to networked through a USB hub. The terminal supports full-speed USB communication (USB 1.1); maximum data transfer rate is 12 Mbps. The terminal defaults to USB communication out of the box. RS-232 The RS-232 cable allows the terminal to communicate with a workstation, modem, or any RS-232 device. Maximum data transfer rate is 115 Kbps. Hardware Requirements for Setup • • • • • Dolphin HomeBase device Communication cable from Honeywell Power cable from Honeywell; see Connecting the Power Cable on page 3-17. USB cable (for USB communication) from Honeywell Serial cable (for RS-232 communication) from Honeywell Software Requirements for Communication On the workstation: • Windows 98 Second Edition, Windows Me, Windows 2000, Windows NT (4.0, SP6 or higher), Windows XP, or Windows Vista operating systems. • ActiveSync must be setup on the workstation before you initiate synchronization from the terminal for the first time. On the terminal and the workstation: • ActiveSync 4.5 or higher. ActiveSync must be configured for same communication type (USB or RS232) on both the host workstation and the Dolphin terminal. Note: 3 - 18 ActiveSync software is available on the Getting Started CD that comes in the box with the Dolphin terminal. Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Setting Up the Host Workstation Verify that ActiveSync is configured to use the appropriate communication type by clicking File > Connection Settings. For RS-232 communication, connect to COM1. For USB communication, check Allow USB connections. Note: You can have both USB and RS-232 selected in the software without impacting processing. However, your hardware setup should use only RS-232 or USB, not both. Communicating with the Dolphin Terminal After setting up both the workstation and the terminal, ActiveSync connection should be automatic. 1. Connect the Dolphin terminal to the a communication peripheral, such as the Dolphin HomeBase. 2. The Dolphin terminal automatically opens ActiveSync to establish a connection. Synchronizing with the Host Workstation After setup, synchronization begins automatically whenever the terminal’s mechanical connector connects to a Dolphin peripheral that is connected to a host workstation with ActiveSync installed. Exploring the Terminal from the Workstation When the terminal and workstation are connected, open the main ActiveSync window (on the desktop), and click Explore. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 3 - 19 The Mobile Device folder opens in Windows Explorer. The terminal is now treated as a mass storage device, and transferring files is as simple as dragging and dropping or copying and pasting as you would for moving files between folders on your hard drive. 3 - 20 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Battery Power Dolphin terminals feature intelligent battery technology with two types of battery power: • • The main battery pack on the back panel (see Main Battery Pack on page 3-21) The backup battery located inside the terminal (see Internal Backup Battery on page 3-24) Both batteries work together to prevent data loss when the terminal is used over long periods of time. Both batteries must be charged to full capacity before using the terminal for the first time! Main Battery Pack Use only the Li-ion battery packs provided by Honeywell. Use of any battery not sold/manufactured by Honeywell may result in damage not covered by the warranty. The Li-ion battery pack is 3.7V/3240mAh/12.0Wh and the primary power source for both the Dolphin terminal and the internal backup battery. Changing the Main Battery Pack Before installing a battery pack, press the Blue + Backlight keys to put the terminal in Suspend Mode (see page 3-26) so that operations are suspended before removing the main power source. Always put the terminal in suspend mode prior to changing the battery. Charging Options When the battery is installed in the terminal, you can insert the terminal into any one of the following peripherals: • • • Power Cable (see page 2-1) Dolphin HomeBase Device (see page 9-1) Charge/Comm Cable (see page 3-17) To fully charge the Li-ion battery before installing in the terminal, use the • Dolphin QuadCharger Device (see page 10-1) Charging Time The Li-ion battery pack requires four hours to charge to full capacity. Battery Pack Storage Guidelines To maintain optimal battery performance, follow these storage guidelines: • Avoid storing batteries outside the specified range of -4 to 122° F (-20 to 50°C) or in extremely high humidity. • For prolonged storage, do not keep batteries stored in a charger that is connected to a power source. Guidelines for Battery Pack Use and Disposal The following are general guidelines for the safe use and disposal of batteries: • Use only the Li-ion battery packs provided by Honeywell. Use of any battery not sold/manufactured by Honeywell may pose a personal hazard to the user. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 3 - 21 • Replace defective batteries immediately; using a defective battery could damage the Dolphin terminal. • Never throw a used battery in the trash. It contains heavy metals and should be recycled according to local guidelines. • Don’t use a battery in any other manner outside its intended use in Dolphin terminals and peripherals. • Don’t short-circuit a battery or throw it into a fire; it can explode and cause severe personal injury. • Excessive discharge damages a battery. Recharge the battery when your terminal indicates low battery power. • If you observe that the battery is physically damaged in some way, please send it to Honeywell or an authorized Honeywell service center for inspection. • Although your battery can be recharged many times, it will eventually be depleted. Replace it after the battery is unable to hold an adequate charge. • If you are not sure the battery or charger is working properly, please send it to Honeywell or an authorized Honeywell service center for inspection. Managing Main Battery Power Data and files saved on the Dolphin terminal may be stored in RAM memory; therefore, maintain a continuous power supply to the terminal to help prevent data loss. When you remove a battery pack, insert another charged battery pack in the Dolphin. If the main battery pack is low, insert the terminal into a charging peripheral to power the terminal and begin recharging the battery. Note: If the main battery is low and the terminal is in suspend mode, pressing the SCAN button does not wake the Dolphin terminal; you must replace the discharged battery with a fully charged battery. Default Critical and Low Battery Points Dolphin terminals are programmed to display warnings when the battery reaches critical and low battery points. The following registry entry sets both warning points: [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power] There are two DWORD values in this registry entry: LowBatt and CriticalBatt. The default values for these entries are as follows: LowBatt=19 (25%) This sets the Low Battery point to 25% (19 hex=25 decimal). When the battery hits the percentage charge specified here, the user is notified by this icon in the Navigation bar . If the main battery is low and the terminal is in suspend mode, pressing the SCAN or Power button won’t wake the Dolphin terminal; you must replace the discharged battery with a battery charged over 25% mark before you can resume terminal operation. CriticalBatt=a (10%) This sets the Critical Battery point to 10% (a hex= 0 decimal). When the battery hits the percentage charge specified here, the user is notified by this icon in the Navigation bar . Note: Warnings do not appear when the terminal is on external power. Setting Critical and Low Battery Points Developers can re-reset the default battery points in the RegEdit Power Tool. 1. Tap Start > Power Tools > RegEdit. 3 - 22 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 2. Drill-down to HKEY_LOCAL_MACHINE > System > CurrentControlSet > Control > Power. 3. Change the Value Data of the BattPowerOff and ExtPowerOff entries. 4. Tap OK to save changes. Note: These changes will not persist through a cold boot. To ensure that these settings persist through cold boots, you need to use the RegBackup Power Tool. For more information about Registry Power Tools, refer to the Dolphin Power Tools User’s Guide available for download at www.honeywell.com/aidc. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 3 - 23 Internal Backup Battery Located inside the terminal, the backup battery is a 2.4V nickel metal hydride (NiMH) battery. The internal backup battery prevents the terminal from being reset when you remove the main battery pack. This battery retains RAM data and allows the real-time clock to remain operational for up to 30 minutes. If the terminal is left without the main battery pack for more than 30 minutes, the internal backup battery discharges and needs to be recharged to function according to specifications. Note: Even if the internal backup battery fails, data and programs stored in Flash memory (IPSM) or an optional SD card are not lost. However, the terminal automatically cold boots when you install a fully charged battery pack and you need to reset the real-time clock. Charging The internal backup battery charges off the main battery pack and requires eight hours charge time to backup RAM data for 30 minutes. You can begin using the Dolphin terminal after charging the main battery for four hours; however, the internal backup battery will continue to charge off the main battery. To ensure that the internal backup battery functions properly, maintain a consistent power supply for the first eight hours of terminal operation. This power supply can be external power (using a charging peripheral) or an installed, charged battery pack or a combination of both. Guidelines Follow these guidelines to maximize the life of the Dolphin’s internal backup battery: • Keep a charged Li-ion battery pack in the Dolphin terminal. • Keep the Dolphin terminal connected to a power source when the terminal is not in use. Checking Battery Power Tap Start > Settings > System tab > Power. 3 - 24 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Resetting the Terminal There are two ways to reset the Dolphin terminal: a soft reset and a hard reset. Soft Reset (Warm Boot) A soft reset re-boots the terminal without losing RAM data. You would perform a soft reset 1) after installing software applications that require a reboot, 2) after making changes to certain system settings, or 3) when the terminal fails to respond. 1. Press and hold Red + ESC for approximately 5 seconds. The screen turns white and the decode and scan LEDs flash for approximately three seconds. 2. When the reset is complete, the Today Screen (see page 2-2) appears. Hard Reset (Cold Boot) A hard reset erases all of the data and applications stored in RAM memory and launches AutoInstall, which re-initializes the terminal. Hard resets automatically launch a soft reset as part of the boot process. 1. Press and hold Red + TAB for approximately 5 seconds. The screen turns white and the decode and scan LEDs light for approximately three seconds. 2. The terminal re-initializes, which re-installs all programs stored in the \IPSM\Autoinstall folder. Note: Set the time and date after each hard reset to ensure that the system clock is accurate. Tap the date on the Today Screen (see page 2-2) to open the Clock setting and set the time and date. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 3 - 25 Suspend Mode Suspend mode suspends terminal operation. The terminal appears to be “off” when in suspend mode. The terminal is programmed to go into suspend mode automatically when inactive for a specified period of time. You can set this time period in the Power setting. To Put the Terminal in Suspend Mode Press the Blue Note: + Backlight keys. You should always put the terminal in suspend mode when you change the battery pack; see Changing the Main Battery Pack on page 3-21. To Resume Terminal Operation To resume terminal operation (or “wake” the terminal from suspend mode), • Press the Blue + Backlight keys. • Press the Scan key • If not in a scanning or imaging application, press one of the side buttons (see page 3-12). Troubleshooting Suspend/Resume If the terminal does not wake when you press the Scan key, the main battery might be too low to resume operation. To check, remove the battery and install a fully charged battery or connect the terminal to a Dolphin charging peripheral. Care and Cleaning of the Dolphin Terminal When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free cloth. The terminal can be cleaned with a damp cloth. 3 - 26 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 4 Using the Keyboards Overview There are two keyboard options: a 29-key keyboard and the 38-key keyboard. 29-Key Numeric Keyboard 38-Key Alpha Keyboard P2 P1 P3 P4 SCAN SEND END ESC PG SFT PG F1 F4 4 GHI F7 7 PQRS TAB F3 F2 2 ABC 3 DEF F6 F5 5 JKL 6 MNO F9 F8 8 TUV 9 WXYZ F10 BKSP START SP The buttons are recessed under the overlay for maximum durability and the panel is backlit for maximum viewability in various lighting conditions. Suspend/Resume Both keyboards provide multiple ways to suspend/resume terminal operation. Suspend Blue + Backlight Resume Backlight Scan Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 4-1 Function Keys Function keys appear on both keyboards and perform specific functions. Name Key Function Backlight Toggles the keyboard backlight on and off. Backspace Backspace moves the cursor back one space. If you are typing text, a character is deleted each time you press the backspace key. Escape Cancels an action. Enter Performs the same function as the Enter key on a PC or workstation. Scan • Activates the image engine to scan a bar code or take an image. • Wakes the terminal from suspend mode. Tab Moves the cursor to the next tab stop or field (on a form or application window). The following keys appear only on the 29-key keyboard: Shift Provides functions as a shift key in application windows and a Caps Lock key when the 29-key keyboard is in alpha mode. On the 38-key keyboard, the Blue modifier key functions as a shift key in both alpha an numeric modes. Space Moves the cursor one space forward. If you are typing text, it moves the text one space forward as well. On the 38-key keyboard, you can perform the same function as the SP key by: • Pressing NUM + E in alpha mode • Pressing E in numeric mode Modifier Keys Modifier keys modify the next key pressed to perform functions or type special characters. Name Blue and Red Key Function Modifies the next key pressed. The overlay of each keyboard is color-coded to indicate the character typed or function performed when the keyboard buttons are pressed in combination with these keys. For modifier key combinations on the 29-key keyboard: • See 29-Key Blue Key Combinations (Alpha Mode) on page 4-7. • See 29-Key Red Key Combinations on page 4-8. For modifier key combinations on the 38-key keyboard: • See 38-Key Red Key Combinations on page 4-11. • See 38-Key NUM Lock Mode on page 4-12. 4-2 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Alpha/Numeric Indicator The Navigation bar features an icon that indicates the alpha/numeric status of the keyboard. This icon changes when the keyboard status changes. Icon Keyboard Status The keyboard is in lowercase alpha mode. The keyboard is in shifted (uppercase) alpha mode. The keyboard is in numeric mode. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 4-3 29-Key Numeric Keyboard Hardware Application Buttons P2 P3 P1 Escape P4 SCAN SEND END ESC PG SFT PG Navigation Keys Scan Enter Shift TAB Tab F1 2 ABC F4 5 JKL F7 6 MNO 8 TUV 9 WXYZ F10 BKSP Alpha Indicators F9 F8 7 PQRS 3 DEF F6 F5 4 GHI Backspace F3 F2 START SP Space Backlight Modifier Keys Navigation Keys Located in the center of each keyboard for easy access with either hand, the navigation keys enable you to move the cursor through application screens. Key Description PG Move the cursor up one row or line. Volume up Page up PG Move the cursor down one row or line. Volume down Page down 4-4 Move the cursor one character to the right. Move the cursor one character to the left. Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Hardware Application Buttons These four buttons are programmed to launch software applications when the Today Screen (see page 2-2) is on the screen. Hardware Application Buttons P2 P3 P1 SCAN P4 SEND END To customize these settings, tap Start > Settings > Personal tab > Buttons Buttons Column Matching Hardware Button Buttons 1–4 Buttons P1—P4 on the 29-key keyboard. Left Left side button; see Side Button on page 3-12. Right Right side button; see Side Button on page 3-12. Customizing a Hardware Button 1. Select the button you want to modify. 2. Select a program from the Assign a program list. 3. Tap OK to save all changes and the change is applied immediately. 4. To verify the change, navigate to the Today screen, press the hardware button and verify that the selected application launches. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 4-5 Toggling Between Alpha and Numeric Modes The 29-key keyboard defaults to numeric mode, which means that the keyboard boots up to numeric mode after each hard reset. Numeric mode is when you type numbers with the number keys. Alpha mode is when you type letters or characters with the number keys. The keyboard switches between alpha and numeric modes easily. The command bar displays an icon that indicates the status of the keyboard so that you can see which mode you’re in when toggling; see Alpha/Numeric Indicator on page 4-3. Switching to Alpha Mode To switch modes, tap the Blue modifier key as follows: • Single-tap to switch only the next character pressed to alpha mode. The keyboard automatically switches back to numeric mode for the next key pressed. • Double-tap to switch to alpha mode permanently. Double-tap again to switch back to numeric mode permanently. Alpha Indicators Each number key has a blue section with white characters inside it that indicate which letter or symbol is typed when you press that key in alpha mode. Please note that when typing in alpha mode, you must use the same multi-press method you would use when typing letters on a phone keypad. Each key press types the next letter in the sequence as displayed by the alpha indicator. Note: You can still use regular Blue key combinations in alpha mode by pressing and holding the Blue modifier key with the next key in the combination. For combinations, see 29-Key Blue Key Combinations (Alpha Mode) on page 4-7. Shift Functionality In Alpha Mode When you switch the keyboard to alpha mode, letters type in lowercase by default. To capitalize letters, tap the SFT key as follows: • Single-tap to capitalize only to the next letter pressed. • Double-tap to turn CAPS LOCK on and off. In Numeric Mode Numeric mode is the default keyboard mode. When the keyboard is in numeric mode, tap the SFT key once to produce special characters; see 29-Key Shift Functionality in Numeric Mode on page 4-7. 4-6 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 29-Key Blue Key Combinations (Alpha Mode) Tap the Blue modifier key to switch to alpha mode for the next key pressed. Double-tap the Blue modifier key to switch to alpha mode permanently. Key Character Uppercase: Double-tap SFT @? ! : @? ! : abc ABC def DEF ghi GHI jkl JKL mno MNO pqrs PQRS tuv TUV wxyz WXYZ Functions If the keyboard is in numeric mode, tap the Blue key once to achieve the following: Key Combination Function Blue + Up Arrow Volume up Blue + Down Arrow Volume down 29-Key Shift Functionality in Numeric Mode When the keyboard is in numeric mode (the default state), tap the SFT key once to produce several common characters. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Key Character Rev (b): Preliminary 9/29/2008 4-7 Key Character 29-Key Red Key Combinations Special Characters Key Combination Character Red + Left Arrow Red + Right Arrow Red + BKSP Red + SP Red + . Red + P1 Red + P2 Red + P3 Red + P4 Functions 4-8 Key Combination Function Red + ESC (hold) Soft reset (warm boot) Red + TAB (hold) Hard reset (cold boot) Red + Up Arrow Page up Red + Down Arrow Page down Red + 1 F1 Red + 2 F2 Red + 3 F3 Red + 4 F4 Red + 5 F5 Red + 6 F6 Red + 7 F7 Red + 8 F8 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Key Combination Function Red + 9 F9 Red + 0 F10 Rev (b): Preliminary 9/29/2008 4-9 38-Key Alpha Keyboard Scan Navigation Keys Tab Backspace Enter Escape Space Shift Backlight NUM Lock Key Modifier Keys Toggling Between Alpha and Numeric Modes The 38-key keyboard defaults to lowercase alpha mode, which means that the keyboard boots up to lowercase alpha mode after each hard reset. Numeric mode is when you type numbers with the number keys. Alpha mode is when you type letters or characters with the number keys. The keyboard switches between alpha and numeric modes easily. The command bar displays an icon that indicates the status of the keyboard so that you can see which mode you’re in when toggling; see Alpha/Numeric Indicator on page 4-3. Shift Functionality in Alpha Mode • To apply Shift functionality to the next character pressed while in lowercase alpha mode, tap the Blue modifier key once. Shift functionality is removed from the next key pressed automatically • To switch into CAPS LOCK mode, tap the Blue modifier key twice. To switch out of CAPS LOCK mode, tap the Blue modifier key twice again. Switching to Numeric Mode • To switch to numeric mode for the next key pressed, tap the NUM key once. • To lock into numeric mode, double-tap the NUM key. • If locked in numeric mode, double-tap NUM key again to switch back to alpha mode. For more information about NUM Lock functionality, see 38-Key NUM Lock Mode on page 4-12. 4 - 10 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 38-Key Red Key Combinations Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Key Combination Function Red + ESC (hold) Soft reset (warm boot) Red + TAB (hold) Hard reset (cold boot) Red + Down Arrow P1 Red + Up Arrow P2 Red + Left Arrow P3 Red + Right Arrow P4 Red + Left Side Button P5 Red + Right Side Button P6 Red + A F1 Red + F F2 Red + K F3 Red + P F4 Red + U F5 Red + E F6 Red + J F7 Red + O F8 Red + T F9 Red + Z F10 Rev (b): Preliminary 9/29/2008 4 - 11 38-Key NUM Lock Mode • To switch to numeric mode for the next key pressed, tap the NUM key once. • To lock into numeric mode, double-tap the NUM key. • If locked in numeric mode, double-tap NUM key again to switch back to alpha mode. Numbers Key Character Key Character Special Characters 4 - 12 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Special Functions Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Key Character Volume up Volume down SP Rev (b): Preliminary 9/29/2008 4 - 13 4 - 14 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 5 Using the Image Engine Overview The Dolphin terminal houses a compact image engine using Adaptus™ Imaging Technology that instantly reads all popular 1D and 2D bar codes and supports omni-directional aiming and decoding. The image engine can also capture digital images. *Pull the plastic tab to remove the plastic film cover over the image engine window before activating the image engine. Available Engines 5300 Standard Range (5300SR) 8.3 mil Linear *Working Range: (.020cm) 10 mil PDF417 (.025cm) 13 mil UPC (.033cm) 15 mil Data Matrix (.038cm) 15 mil QR (.038cm) 35 mil MaxiCode (.089cm) Near 3.5 in. (8.9cm) 3.1 in. (7.9cm) 2.1 in. (5.3cm) 2.3 in. 5.8cm) 3.1 in. (7.9cm) 2.0 in. (5.1cm) Far 7.6 in. (19.3cm) 9 in. (22.9cm) 13.2 in. (33.5cm) 10.2 in. (25.9cm) 8.8 in. (22.4cm) 13.0 in. (33cm) *Data characterized at 23°C and 0 lux ambient light. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 5-1 Supported Bar Code Symbologies Symbology Type Symbology Name 1D Symbologies Codabar Code 3 of 9 Code 11 Code 32 Pharmaceutical (PARAF) Code 93 Code 128 EAN with Add-On EAN with Extended Coupon Code EAN-8 EAN-13 GS1-128 GS1 Databar Interleaved 2 or 5 2D Symbologies Aztec Codablock Code 16K Code 49 Composite Data Matrix GS1 Databar MaxiCode Micro PDF OCR PDF417 QR Code Composite Codes Aztec Mesa Codablock F EAN·UCC GS1 Databar-14 OCR OCR US Money Font MICR (E 13 B) and SEMI Font OCR-A OCR-B Postal Codes Postnet and most international 4-state codes Australian Post British Post Canadian Post China Post Japanese Post KIX (Netherlands) Post Korea Post Planet Code 5-2 ISBT 128 Matrix 2 of 5 MSI Plessey PosiCode Straight 2 of 5 IATA Straight 2 of 5 Industrial Telepen Trioptic Code UPC UPC-A UPC-E Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Activating the Engine When a scanning application is open, press the SCAN key to activate the image engine. You can also press one of the side buttons (see page 3-12), which are programmed to activate the image engine in a scanning application by default. Using Demos Demos are software utilities loaded on all Dolphin terminals that demonstrate the advanced features of the terminal. There are two Demos feature the image engine: Image Demo and Scan Demo. To access these demos, tap Start > Demos, • Select Scan Demo to verify decoding, or • Select Image Demo to verify imaging. For more information about Demos, refer to the Dolphin Demos User’s Guide, which is available for download from www.honeywell.com/aidc. LEDs The LEDs in the center of both keyboards (for location, see LEDs on page 4-1) light when using the image engine. Scan LED The LED on the right lights red when you press the scan trigger in scanning applications. Decode LED The LED on the left lights green when a scanned bar code is successfully decoded. Decoding The Dolphin terminal supports two types of image decoding: full-area imaging and Advanced Linear Decoding (ALD). Full-area Imaging Full-area imaging means that the Dolphin terminal support omni-directional aiming, which means that a positive read can be obtained from many positions. For details, see OmniDirectional Scanning Positions on page 5-4. ALD ALD provides fast reading of linear (1D) and stacked linear bar codes (PDF417). For the best read, the aiming pattern should be centered horizontally across the bar code. When ALD is enabled, the reader does not read matrix or postal codes. To Decode a Bar Code 1. Tap Start > Demos > Scan Demo. 2. Position the Dolphin terminal over one of the sample bar codes on page 5-4. A range of 4–10 inches (10–25 cm) from the bar code is recommended. 3. Project the aiming brackets by pressing and holding the SCAN key. The Scan LED lights red. 4. Center the aimer crosshair over the bar code. The aiming beam should be oriented in line with the bar code to achieve optimal decoding; Omni-Directional Scanning Positions, page 5-4 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 5-3 5. When the bar code is successfully decoded, the decode LED lights green and the terminal beeps. Sample Bar Codes You can use the following bar codes to verify decoding: Sample 128 Sample PDF417 Code 128 PDF417 Test Message Omni-Directional Scanning Positions The high-vis aiming pattern frames the bar code to provide you with the best scanning performance. Note: To achieve the best read, the aiming beam should be centered horizontally across the bar code. The aiming pattern is smaller when the terminal is held closer to the code and larger when the terminal is held farther from the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas larger bars or elements (mil size) should be read farther from the unit. 5-4 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Capturing Images The image-capture process is an intuitive, split-second operation for experienced users. By following basic guidelines, however, new users can easily develop their own technique and, with practice, quickly learn to adapt to different application environments. Image Preview When the imaging process is initiated, the touch screen displays a preview of the object. This is a live video image of what the imager is currently viewing and has a slightly degraded appearance compared to the captured image. This is normal; the captured image has a higher resolution. File Formats The Dolphin terminal is capable of saving images in a number of industry-standard file formats such as BMP, JPG and PNG. The default file format for images is a grayscale JPG. File Size Digital images have a maximum image size of 640 x 480 pixels and may have up to a 256 grayscale image definition. The image quality and related file size are determined by the data compression method used by the software application used to take the image. The average size of the image file is approximately 4–8K. However, the size of the image depends on image content, the more complex the content, the larger the file size. Taking an Image 1. Tap Start > Demos > Image Demo. 2. Point the terminal at the object. 3. Press the SCAN key to activate the engine. The touch screen displays a preview of the object. 4. Adjust the terminal’s position as necessary. Use the preview on the screen as a guide. 5. Hold the terminal still and release the SCAN key. The touch screen flashes, and the captured image appears on the screen. 6. By default, the image is saved to the My Device folder. To save the image to another location, tap File > Save As. High-Vis Aiming Pattern If your terminal is configured with the 5300SR imager, you can enable the aiming pattern for imaging in the Image Demo application. 1. Tap Start > Demos > Imaging Demo > Options menu > Aimer. 2. The aiming pattern is now enabled for imaging. Uploading Images Image files can be transmitted to a host workstation via • Microsoft ActiveSync and a Dolphin communication peripheral • Wireless radio: 802.11b/g and/or Bluetooth Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 5-5 5-6 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 6 System Settings Overview Customized settings are available on the Start menu. Tap Start > Settings and settings screen opens displaying the Personal tab. Settings consists of three tabs: Personal, System, and Connections. Personal Tab System Tab Connections Tab Tab Description See Page Personal Customizes buttons, set SIP options, and adjust headset settings. 6-2 System Adjusts system settings. 6-7 Connections Establishes network connections settings. 7-1 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 6-1 Personal Tab To access the Personal tab, go to Start > Settings. The screen opens displaying the Personal tab. Icon Description For more information… Buttons Program the side buttons to perform specific tasks. See Buttons on page 6-3. Input Customizes the SIP. See Input on page 6-4. Lock Password protect the terminal to limit access to the terminal. Menus Customizes what appears on the Start menu. Owner Information Enter your contact information. This information will appear on the Today screen. Sounds & Notifications Set the sound volume, enables and disables sounds for specific actions, and sets sound parameters for system notifications. Today Customize the look and the information displayed on the Today screen. See Menus on page 6-5. Note: Personal settings are stored in RAM memory. They are replaced by system defaults after each hard reset. For more information about resets, see Soft Reset (Warm Boot) on page 3-25. 6-2 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Buttons Buttons programs both keyboard buttons and the side buttons to launch applications or execute commands. The default button assignments that appear on the Buttons window are inactive until you enable the HotKeys Power Tool. To Enable HotKeys 1. Tap Start > Power Tools and tap the HotKeys icon once assignments in the Buttons setting are active. 2. Verify the assignment by tapping the button on the keyboard. . HotKeys is enabled and the button For more information about the HotKeys Power Tool, refer to the Dolphin Power Tools User’s Guide, which is available for download from the web at www.honeywell.com/aidc. Button Assignments By default, the side buttons (for locations, see page 3-12) activate the image engine but can be programmed to launch applications or execute commands in the Buttons setting. 1. After HotKeys is enabled, tap Start > Settings > Personal tab > Buttons Note: The buttons that appear on this window are the only buttons that can be programmed via the Buttons setting. You cannot add buttons to this window. 2. To change button assignment, tap on the name of the application in the Assignment column and select a program or command in the Assign a program drop down list. 3. Tap OK to save. Available Applications The Assign a program list contains the applications installed on the terminal. If there is a program installed that you would like to see in this list, paste a Shortcut to the program in the \\Windows\Start Menu\Programs folder. For instructions about creating shortcuts, see Using File Explorer on page 6-5. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 6-3 Additional Functions The Assign a program list also contains the following commands: Command Description Opens the soft input panel.Nothing happens when the button is pressed. This is the default setting for the LSide and RSide buttons and means that pressing either button activates the image engine. Performs the same function as tapping OK on the screen. Scrolls down in the open application. Scrolls left in the open application. Scrolls right in the open application. Scrolls up in the open application. Opens the Start menu. Opens the Today screen. Input The Input settings enables you to customize input from the SIP, adjust word completion settings in Microsoft applications, and set defaults for voice recording. Input Method 6-4 Word Completion Rev (b): Preliminary 9/29/2008 Options Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Menus You can add existing programs you use often, such as File Explorer, to the Start menu for faster access. You are not installing the program, just allowing access to it from the Start menu. To add programs to the Start menu, you can use • The Menus setting on the Personal tab (see page 6-5), • File Explorer (see page 6-5), or • ActiveSync (see page 6-6). Note: The Start menu can hold only seven applications at a time. Using System Settings 1. Tap Start > Settings > Personal tab > Menus 2. Tap the check box for the program you want to add and tap OK to save. Note: 3. If you try to go over seven applications, a warning message appears and you will have to delete applications as necessary. Tap the Start menu to verify that the program appears on it. Using File Explorer If you do not see the program listed, you can either use File Explorer to move the program or ActiveSync on the workstation to create a shortcut to the program and place the shortcut in the Start Menu folder. Note: We recommend that you Copy and Paste Shortcut so that you do not alter your program configurations by accident. Using Copy and Paste Shortcut (as opposed to Cut and Paste) ensures that the program files remain where they need to be for the system to find them to perform system functions. 1. Tap Start > Programs > File Explorer, and navigate to the program. File Explorer opens to My Documents by default; to see a list of all folders, tap the folder name and then My Device. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 6-5 2. Tap and hold on the program, then tap Copy on the pop-up menu. 3. Navigate to the Windows folder and open the Start Menu (My Device > Windows > Start Menu), tap and hold a blank area of the window, and tap Paste Shortcut on the pop-up menu. 4. Tap the Start menu to verify that the program now appears on it. Using ActiveSync on the Workstation Here, you are performing the same basic process as on the terminal, except that you are using the Explore utility (Windows Explorer) to copy and paste the shortcut. 1. Open ActiveSync > Explore and navigate to the program. 2. Right-click on the program and select Create Shortcut. 3. Select the shortcut, right-click, and select Cut. 4. Navigate to the Start Menu folder (Windows > Start Menu). 5. Right-click on an empty area and select Paste Shortcut. 6. On the terminal, tap the Start menu. 7. Verify that program appears. 6-6 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary System Tab The System tab enables you to verify and sometimes alter system parameters. To access the System tab, go to Start > Settings > System tab. Tap the appropriate icon to open that system setting. For details, • • • • • • • • • • • • • See About on page 6-7. See Backlight on page 6-8. See Certificates on page 6-8. See ClearType Tuner on page 6-8. See Clock & Alarms on page 6-9. See Encryption on page 6-9. See Error Reporting on page 6-9. See External GPS on page 6-10. See Memory on page 6-10. See Power on page 6-12. See Regional Settings on page 6-12. See Remove Programs on page 6-13. See Screen on page 6-14. About The About system setting displays specific information about what is loaded on the terminal. It contains three tabs: Version Tab Displays the information about the software, operating system, and processor of the terminal. Device ID Tab Displays the information the terminal uses to identify itself to other devices. It can be important to know this information if the Dolphin terminal is going to be part of a networked system of devices. Device name: Displays the system’s default name. (This is the name used by ActiveSync.) Description: Displays the description of the device ID. Copyrights Tab Displays important copyright information. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 6-7 Backlight The Backlight system setting enables you to customize backlight functionality for the display. The backlight for the color display is user-defined. Tap Start > Settings > System tab > Backlight. There are two tabs: The Battery tab determines display backlight settings when the terminal is running on battery power. The External tab determines display backlight settings when the terminal is running on external power. The options on each tab are the same. Turn off backlight: Select how many minutes you want to elapse before the backlight automatically turns off. Turn on backlight: Select this option if you want the backlight to turn on when the a button is pressed or the touch screen is tapped. Tap OK to save settings. Backlight Intensity Tap the Backlight tab and move the slider to set the intensity of the backlight. The default is 8. Certificates Certificates shows you which certificates are recognized by the operating system. If the certificate does not appear on one of these tabs, then the operating system does not recognize it and you will not be able to use that certificate. ClearType Tuner This system setting enables you to adjust the level ClearType font rendering by moving a slider. The sample text displays the setting results immediately. Of course, you must first enable ClearType font rendering to change the appearance of fonts on the screen; see ClearType Tab on page 6-14. 6-8 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Clock & Alarms This setting sets the system clock, which means that all scheduled items run according to this setting. The time and date need to be reset after every hard reset of the terminal so that the system clock is accurate. On the Today screen, tap the line that displays the time and date, The Clock Settings screen appears. The selected time sets the system clock. Encryption Encryption gives you the option of encrypting files placed on storage cards so that those files cannot be read by any other device. Error Reporting Error Reporting gives you the option of enabling or disabling the error reporting function of Windows Mobile 6. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 6-9 External GPS If a Windows Mobile 6.0-based device is equipped with a GPS module, External GPS is a Microsoft tool that determines which port an external GPS software application can use. The Dolphin 7600 terminal is not equipped with a GPS module. Memory The Memory system setting displays capacity and usage statistics for both RAM (volatile) and IPSM/ Storage Card (non-volatile) memory. Access this setting whenever you receive system messages about memory. You cannot change the terminal’s memory allocation in the Memory system setting. To change the memory allocation, you need to use the SetRAM Power Tool (Start > Power Tools > SetRAM). For more details, please refer to the Honeywell Power Tools User’s Guide, which is available for download from www.honeywell.com/aidc. There are three tabs: Main, Storage Card, and Running Programs. Main Tab This tab displays the usage statistics of the on-board, volatile RAM memory. Columns: Storage=RAM memory used for storing programs and program data. Program=RAM memory used to run programs. Rows: Total= Displays the current MB of memory allocated for use. In use=Displays the total MB of that allocated memory in use. Free=Displays the total MB of memory available. 6 - 10 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary This tab displays the current capacity and usage statistics of the selected memory type; IPSM or Storage Card. Storage Card Tab Select the memory type from the drop-down list. IPSM is selected by default. Total storage card memory=The total MB of memory capacity of IPSM or Storage Card. In use=The MB currently being used. Free=The MB that is still available for use. IPSM—Short for Internal Persistent Storage Manager, this is the on-board Flash memory that is non-volatile. Because this memory is non-volatile, data or programs stored in IPSM are not affected when power is removed. Autoinstall programs, for example, are stored in IPSM so that they are always installed at cold-boot startup. Storage Card—You can install one memory card in Dolphin terminals (see Access Door on page 3-12). If a storage card is installed in the terminal, you can select it in the drop-down list and see capacity and usage statistics for the card. Running Programs Tab Displays the software programs currently using Storage memory. Check this tab when you are receiving out of memory errors or when the mobile computer is running slowly. You can • Select a program in the list and tap Stop to stop it from running (and therefore from using memory), or • Tap Stop All to automatically stop all running programs. Anytime you stop a running program, it frees up RAM memory. Be advised that, when you stop a program here, any unsaved data in that program is lost. To free up memory without risking data loss, return to the running program, save your data, and close the application. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 6 - 11 Power Power system settings contains three tabs: Battery and Advanced. Battery Tab Displays the remaining charge of batteries. For more information about the terminal’s batteries, see Battery Power on page 3-21. Advanced Tab Determines power time-outs. For On battery power, select from the drop-down list, the number of minutes of inactivity you want to pass before the terminal powers off when running on battery power. For On external power, select from the drop-down list, the number of minutes of inactivity you want to pass before the terminal powers off when running on external power. Note: You can also set automatic turn-off times for the terminal to conserve power. When the terminal is “turned off,” that means it’s in suspend mode; see Suspend Mode on page 3-26. Regional Settings Regional Settings enables you to customize the appearance and formatting to your geographic region. Specifically, you can customize numbers (i.e., number of decimal places allowed), currency (i.e.,using the $ or € symbol), time, and date. These specifications apply to all screens, including the Today screen. The Region tab displays an overview of the region selected in the drop-down list at the top. The terminal is loaded with a number of pre-programmed regional settings. Select one from the list and the results appear on the screen. To see specific settings or change a specific setting, tap on one of the tabs, make the change and tap OK to save it. 6 - 12 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Remove Programs Remove Programs enables you to remove programs installed on the terminal. Use this setting to troubleshoot when you receive messages that the terminal is out of memory. The programs removed are removed from RAM memory. Any program (usually CAB or DLL files) stored in the Autoinstall folder (My Device > IPSM > Autoinstall) will re-install after the next hard reset. For information about the hard reset process, see Hard Reset (Cold Boot) on page 3-25. 1. Tap Remove Programs. In the list, select the program you want to remove. 2. Tap Remove. The following message appears: 3. Tap Yes. Wait while the program is removed. 4. Verify that the program no longer appears in the list. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 6 - 13 Screen The Screen system setting contains three tabs: Alignment, Clear Type, and Text Size. Alignment Tab Orientation–The default orientation for the screen is Portrait. Select one of the Landscape options to change the screen orientation. Align Screen–You need to re-align the screen if tapping buttons or icons with the stylus no longer seems to work appropriately. Tapping Align Screen brings up the align screen window where you are guided to tap a target several times. This re-calibrates how the touch screen receives input. ClearType Tab The display supports ClearType font rendering, which is a Microsoft technology that dramatically increases the readability of text on LCD displays. To enable ClearType font rendering, select Enable ClearType and tap OK. To adjust the level of ClearType font rendering, use the ClearType Tuner; see ClearType Tuner on page 6-8. For more information about ClearType font rendering, visit: www.microsoft.com/typography/cleartype/ what.htm?fname=%20&fsize= Text Size Tab The Text Size tab enables you to perform font scaling within certain views of the Today screen, Contacts, Calendar, Messaging, and Tasks. This means that you can increase or decrease the point size of the font on application windows. This is the default font size setting. To change the font size, move the slider toward Smallest or Largest. The Example text changes to reflect the font change. Tap OK to save the new font size setting. 6 - 14 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 7 Connecting the Terminal Connections Tab The Connections system setting provides access to the terminal’s various communication options. Icon Description See Page Beam Controls whether or not the terminal can receive data via IrDA. 7-3 Bluetooth Configures the Bluetooth connection. This icon appears only if a Bluetooth radio and driver is installed on the terminal. 8-1 Connections Opens Microsoft’s connections manager. 7-4 Dolphin Wireless Manager Manages the wireless radios installed in the terminal. 7-6 Network Cards Manages the network drivers installed in the terminal. 7-9 USB to PC Offers additional USB options. 7-10 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 7-1 Infrared Communication Using the IrDA port, you can send and receive data between the terminal and other devices equipped with infrared. This can include, but is not limited to, Windows Mobile information such as Contacts and Tasks, as well as software upgrades. The maximum data transfer speed is 115 Kbps. IrDA Port Location IrDA Port To send or receive, the IrDA ports of both devices - whether it’s two terminals, or a terminal and a host device - must be aligned with each other and within a close range. The maximum data-transfer speed is 115 Kbps. Sending Data 1. Align the IrDA ports. 2. Open the program where you created the item you want to send and locate the item in the list. You can also beam files, but not folders, from File Explorer. 3. Tap and hold the item and select Beam File. 4. The IrDA port searching for a receiving IrDA port in the vicinity. The selected device reads “Pending.” 7-2 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 5. When the IrDA port finds the IrDA port of the other device, it immediately starts sending the selected file. The selected device reads “Sending.” 6. When the file transfer is complete, the selected device reads “Done.” Receiving Data The Beam Setting must be set to receive for the terminal to receive data from other infrared devices. 1. Verify that beam settings are set to receive. Tap Start > Settings > Connections tab > Beam. The Beam Settings window should appear as follows: 2. Align the IrDA ports. 3. Have the owner of the other device send the information to you. 4. Your terminal automatically begins receiving it. 5. A popup message appears asking if you want to receive the incoming file. 6. Tap Yes to receive the file. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 7-3 Connections Manager The connections manager sets up various network connections to Internet Service Providers (ISPs) via external modem. To open the connections manager, tap Start > Settings > Connections tab > Connections icon Server-Assigned IP Addresses All server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP). Zero-Config Wi-Fi The zero-config Wi-Fi feature of Windows Mobile is disabled on Dolphin 7600 terminals. If you are using one of the on-board wireless radios to connect to a network, do not enter network parameters in the connections manager. The Dolphin terminal uses the radio’s settings to connect to the network. Task Tab The Task tab enables you to initially configure, then manage network settings when using a modem. Select an item in this list and then complete the setup screens that follow with the appropriate information for your network. My ISP The links under this heading enables you to add and manage modem connections to an ISP. To complete the setup screens, obtain the following information from your ISP: • • • • ISP dial-up access telephone number Username Password TCP/IP settings My Work Network These links enable you to establish the following connections types: • • • Modem Virtual Private Network (VPN) Proxy server connection To complete the setup screens, obtain the network parameters from your system administrator. 7-4 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Proxy Server Connections If you are connected to your ISP or private network during synchronization, the terminal should download the proper proxy settings during synchronization with the PC. If these settings are not on your PC or need to be changed, ask your ISP or network administrator for the proxy sever name, server type, port, type of Socks protocol used, and your user name and password. Modify an Existing Connection Manage Existing Connections appears on the Connections tab after at least one network connection has been established. Tap Manage Existing Connections on this tab and follow the setup screens. You will usually be walked through the same setup screens used to establish the connection. Advanced Tab The Advanced tab enables you to select the default network, dialing rules, and IP address exceptions for modem connections. Note: You should not need to change Advanced settings because most ISPs now use DHCP addresses. Online Help For more information about modem connection setup, consult the online help on the setup screens by tapping the Help icon . Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 7-5 Dolphin Wireless Manager The Dolphin Wireless Manager provides a centralized interface that enables and disables all the on-board radios. Each radio has its own configuration program and the Dolphin Wireless Manager also provides shortcuts to the configuration utilities for each radio. There are two radio options: 802.11b/g and Bluetooth. 1. 802.11b/g The WLAN radio is configured in the Honeywell WLAN Secure Wireless Client (SWC). Refer to the Honeywell WLAN SWC User’s Guide, which is available for download from the 7600 product page at www.honeywell.com/aidc. 2. Bluetooth See Working with the Bluetooth Radio on page 8-1. Dolphin Wireless Manager Window Tap Start > Settings > Connections tab > Dolphin Wireless Manager Each rectangle represents a radio. If a rectangle is grayed-out, then the radio is not installed on the terminal. These buttons show you the state of the radio. Enabling the Radios 1. Tap Start > Settings > Connections tab > Dolphin Wireless Manager 2. Tap anywhere inside the rectangle or the OFF button inside the rectangle. The radio begins activating. 3. When the radio is activated (i.e., transmitting a signal), the OFF button changes to ON. Note: If applicable, information about the radio appears in the rectangle. 7-6 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Accessing Radio Configuration Utilities Each of the three radios have their own configuration utilities that you can access through the Menu. For 802.11b/g Tap WLAN Settings to open the SWC and configure the radio. Refer to the Honeywell WLAN SWC User’s Guide, which is available for download from the 7600 product page at www.honeywell.com/aidc. For Bluetooth Tap Bluetooth Settings to open the Bluetooth Manager and configure the radio (see page 8-1). Icons in the Navigation Bar Icons that indicate radio functionality appear in the Navigation bar. For a complete listing, see Icons in the Navigation Bar on page 2-3. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 7-7 COM Port Assignment Table COM Port Description COM0 Unused COM1 Serial Port: RS-232 Connector on the bottom panel COM2 Not accessible COM3 IrDA: Serial Infrared (SIR) up to 115 Kbps COM4 Not accessible COM5 Bluetooth DUN COM6 IrCOMM COM7 Unused COM8 USB Serial: Virtual USB Serial port for ActiveSync COM9 Bluetooth BTHATCI server 7-8 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Network Cards The Network Cards setting displays the network cards installed in the terminal. 1. Tap Start > Settings > Connections > Network Cards. 2. Tap on an adapter in the list to review its settings. (Server-assigned IP addresses use DHCP.) 3. If you make a change on one of these tabs, tap OK to confirm the changes. 4. You must perform a soft reset to update the registry entries; see Soft Reset (Warm Boot) on page 325. During the soft reset, the new registry entries are created and can be read by the applications that need them. Do NOT perform a Hard Reset (Cold Boot) (see page 3-25) after modifying an adapter here. Hard resets return the terminal to factory defaults, which erases network adapter modifications made here. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 7-9 USB to PC The USB to PC applet enables you to switch between RNDIS (Remote Network Driver Interface Specification) USB and Serial USB communication. Dolphin 7600 terminals default to Serial USB. Honeywell recommends using Serial USB. To change this setting, tap Start > Settings > Connections tab > USB to PC is not selected, which indicates Serial USB. . The enable option To switch to RNDIS USB, select Enable advanced network functionality and tap OK to save. (Wait as the terminal makes the change.) 7 - 10 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Installing Additional Software Dolphin terminals ship with the operating system, radio drivers, and custom Honeywell software already installed. These default programs install when your terminal first boots up. You can install additional software programs to the terminal provided that the following parameters are met: • • • The software program was created for the Windows Mobile platform. The terminal has enough memory to store and run the program. The program has an EXE, CAB, or DLL extension. When selecting programs, verify that the program and version of the program are designed for the Windows Mobile 6 and the terminal’s processor. You can verify your processor by tapping Start > Settings > System tab > About > Version tab. Make a note of the information in the Processor field. To install additional software, you can use the communication options described in this chapter. • Adding Programs via ActiveSync, page 7-11. • Infrared Communication, page 7-2. Adding Programs via ActiveSync When selecting programs, verify that the program and version of the program are designed for the Windows Mobile 6 and the terminal’s processor. You can verify your processor by tapping Start > Settings > System tab > About > Version tab. Make a note of the information in the Processor field. Generally, software for Windows Mobile-based devices must be installed to the host workstation first, then transferred to the terminal. 1. Download the program to the workstation from either the Internet or the install CD. You may see a single EXE or setup.exe file, a CAB file, or DLL. (There may also be several versions of files for different device types and processors.) 2. Read any installation instructions, Read Me files, or documentation that comes with the program. Many programs provide special installation instructions. 3. Connect the terminal to the workstation via Honeywell communication peripheral. If the File is an Installer An installer program is one that installs to the workstation and the terminal simultaneously when the workstation and the terminal are connected via ActiveSync; one process installs to both devices. 1. On the workstation, double-click the EXE or setup.exe file. The installation wizard begins. 2. Follow the directions on the workstation screen. The installation process includes transferring the software to the terminal via ActiveSync. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 7 - 11 If the File is Not an Installer Some programs cannot be installed on workstations because they are designed exclusively for Windows Mobile-based devices. In these cases, the appropriate files must be stored on the host workstation and transferred to the terminal via ActiveSync Explore. Note: You know that the program is not an installer because an error message stating that the program is valid but designed for a different type of computer appears when you try to install the program on the workstation. 1. If you cannot find any installation instructions for the program in the Read Me file or documentation, open ActiveSync on the workstation and click Explore. 2. On the workstation, navigate to the workstation folder containing the program file(s) and copy them to the Program Files folder on the terminal. If you want the program to persist through hard resets, past the program to the Autoinstall folder (\IPSM\AutoInstall). 3. On the terminal, tap Start > Programs > File Explorer and navigate to the folder where the program is located. 4. Double-tap on the program file to install it. If you copied the file to the Autoinstall folder, you can choose to install the program by performing a hard reset. The program installs as part of initialization. 5. After installation is complete, access the program by tapping Start > Programs and the program appears on the Programs screen. 6. Tap the icon to open the program. Adding Programs From the Internet When you have established a network connection (whether via modem or wireless radio), you can access the Internet and download additional software programs. When selecting programs, verify that the program and version of the program are designed for Windows Mobile 6 and the terminal’s processor. You can verify your processor by tapping Start > Settings > System tab > About > Version tab. Make a note of the information in the Processor field. 1. Open Internet Explorer and navigate to the program’s location. You may see a single EXE or setup.exe file, or several versions of files for different device types and processors. 2. Select the program version that matches your Dolphin terminal and processor. 3. Read any installation instructions, Read Me files, or documentation that comes with the program. Many programs provide special installation instructions. 4. Download the program to the terminal straight from the Internet. You would normally store the program in the \Program Files folder unless another location is required by the program. 5. On the terminal, double-tap the installer file; e.g., the EXE file. 6. The installation wizard for the program begins. 7. Follow the directions on the screen to complete installation. 7 - 12 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 8 Working with the Bluetooth Radio Enabling the Bluetooth Radio You enable the Bluetooth radio in the Dolphin Wireless Manager (see page 7-6). 1. Tap Start > Settings > Connections tab > Dolphin Wireless Manager 2. Tap anywhere inside the Bluetooth rectangle and Bluetooth begins activating. 3. When the radio is activated (i.e., transmitting a signal), the OFF button changes to ON. Now, the Bluetooth radio is transmitting a signal. Additional text in the Bluetooth section tells information about the Bluetooth radio. “Visible” and “Not visible” indicates whether the Bluetooth radio is discoverable or not discoverable by other Bluetooth devices. Now, you can connect to other transmitting and discoverable Bluetooth devices (see page 8-2). To make the terminal discoverable for other Bluetooth devices to find, you need to make the Bluetooth radio discoverable (see page 8-8). Icons in the Navigation Bar Icons that indicate radio functionality appear in the Navigation bar. For a complete listing, see Icons in the Navigation Bar on page 2-3. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 8-1 Connecting to Other Bluetooth Devices You need to perform a device discovery and then select a discovered device and connect to it. Pairing happens as part of the connection process. 1. In the Dolphin Wireless Manager, tap Menu > Bluetooth Settings. OR Tap Start > Settings > Connections tab > Bluetooth 2. Tap Add new device. The terminal begins searching for discoverable Bluetooth devices. 3. Select a device in the list and tap Next. 8-2 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 4. You are prompted to enter a passcode. If the device has a specific passcode, enter it in the Passcode field and tap Next. If the device does not have a specific passcode, enter one in the Passcode field and tap Next. The Bluetooth radio tries to connect with the device. 5. If you created a passcode, you will be prompted by the other device to enter the same passcode. Enter the created passcode to establish a paired connection. (If you entered a the passcode from the device, you shouldn’t have to do anything on the other device.) 6. When the connection is complete, a list of matching and supported services on the device appears. 7. Select the services you want to use and tap Finish. The services on the new devices have to be selected or else the pairing won’t include those services, even though the devices are paired. If services are not selected, you will be continually reprompted for the passcode from the device. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 8-3 8. The device appears in the list on the main window. 9. After the passcodes have been accepted on both sides, you have a trusted (“paired”) connection. Pairing and Trusted Devices The terminal does support pairing. Pairing happens during general connection setup. Paired devices are "trusted" devices. This means that there is unrestricted access to all services (including services that require authorization and authentication). A connection can exclude pairing. A device that is connected to the terminal but not paired with it is considered an untrusted device. Content can still be passed to untrusted devices by requiring authorization with each attempt (for example, with the initialization of a file exchange). The Beam File method of file transfer on the can be used to pass a file as an untrusted device; see Transferring Files on page 8-7. 8-4 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Types of Devices and Services When you tap Add new device on the Devices tab, the Bluetooth radio scans for discoverable Bluetooth devices in range, which are Bluetooth devices that have been made discoverable. Device Types The types of devices in the vicinity of the radio appear in the list of discovered devices. Supported Services Only the services that are mutually supported on both devices appear on the Partnership Settings window. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 8-5 Connecting to Bluetooth Printers 1. Make sure the Bluetooth printer is in range and set to be discoverable by other Bluetooth devices. 2. Look up the Bluetooth printer’s broadcasted ID. 3. Perform a device discovery (Tap Settings > Connections > Bluetooth > Add new device.) 4. Look for the Bluetooth printer’s broadcasted ID in the list of discovered devices. 5. Click on the Bluetooth printer’s ID and wait for the prompt to enter a Passcode. 6. If required, enter the Passcode and tap Next. The passcode may default to either “1111” or “0000.” If there is no default, consult the printer literature for the number. 7. Select a printing-related service in the list of services. 8. Tap Finish to establish the connection on the terminal. 9. Complete any additional steps required by the printer. Connecting to Bluetooth Headsets 1. Make sure the Bluetooth headset is in range and set to be discoverable by other Bluetooth devices. 2. Look up the headset’s broadcasted ID. 3. Perform a device discovery (Tap Settings > Connections > Bluetooth > Add new device.) 4. Look for the headset’s broadcasted ID in the list of discovered devices. 5. Click on the headset’s ID and wait for prompt to enter a passcode. 6. If required, enter the Passcode and tap Next. The passcode may default to either “1111” or “0000.” If there is no default, consult the printer literature for the number. 7. Select Headset in the list of services. 8. Tap Finish to establish the connection on the terminal. 9. Complete any additional steps required by the headset. 8-6 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Transferring Files 1. Tap Start > Programs > File Explorer. 2. Navigate to the file you want to transfer. 3. Tap and hold on the file and select Beam File on the popup menu. 4. The Bluetooth radio begins searching for devices. When a Bluetooth device is first found, it appears as an Unknown device; the icon indicates that the device is a Bluetooth device. As data is retrieved, the device IDs appear in the list. 5. Tap the device to begin sending the selected file. 6. While trying to connect, the selected device reads “Pending.” 7. When the file is being transferred, the selected device reads “Sending.” Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 8-7 Making the Terminal Discoverable By default, the Dolphin terminal is not discoverable, which means that the terminal will not be found by other Bluetooth devices. To make the terminal discoverable, tap the Mode tab on the Bluetooth Settings window. Select Make this device visible to other devices and tap OK. 8-8 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 9 Dolphin HomeBase Device Overview The Dolphin HomeBase device is a charging and communication cradle that supports full-speed USB 1.1 communication with a workstation. You can also purchase a serial RS-232 HomeBase device. Battery Charging The HomeBase device completes a full charge of the main battery pack in less than four hours. In addition to charging, the HomeBase device powers the intelligent battery charging system in the terminal that protects the battery from being damaged by overcharging. The terminal senses when a battery pack is fully charged and automatically switches to a trickle charge that maintains the battery at full capacity. As a result, terminals may be stored in the HomeBase device indefinitely without damage to the terminals, battery packs, or peripherals. Communication The HomeBase device can communicate via USB or serial RS-232. Data transmission for USB is up to 12 Mbps. Data transmission for serial RS-232 is up to 115 Kbps. HomeBase devices cannot be physically connected to each other–sometimes referred to as “daisychaining”–but can be networked together via serial or USB hubs. Convenient Storage The battery charging system makes the HomeBase device a safe and convenient storage receptacle for your terminal. Capacity The HomeBase device holds one terminal and charges its battery pack. Power Supply The power cable that ships with each unit also powers the HomeBase device. Use only the peripherals, power cables, and power adapters from Honeywell. Use of peripherals, cables, or power adapters not sold/manufactured by Honeywell may cause damage not covered by the warranty. Use only the Li-ion battery packs provided by Honeywell. Use of any battery not sold/manufactured by Honeywell may result in damage not covered by the warranty. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 9-1 Front Panel Terminal Well Dock LED Terminal Well Place the terminal in this well to communicate with a host device, power the terminal, and charge its battery. Dock LED Turns solid green when the terminal is properly seated in a powered HomeBase device. When this light is on, the terminal is connected to the HomeBase device. Rubber Feet The bottom panel has four rubber feet–one at each corner–to stabilize the unit on a flat surface. You can set the HomeBase device on a dry, stable surface, such as a desktop or workbench near an electrical outlet. 9-2 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Back Panel DC Power Jack Pivot Connector USB Port Pivot Connector This pivoting connector swivels 90 degrees. The default position is horizontal, with the connectors facing straight out the back panel. The pivot connector stops in both the horizontal and vertical positions, with the connectors facing out the bottom panel. DC Power Jack Connect the power cable to this power jack; see Powering the HomeBase Device on page 9-4. USB Port This USB port is full-speed (v1.1). Using the USB cable, you can connect the HomeBase device to a USB-compliant device to facilitate USB communication to and from the terminal. USB communication occurs through Microsoft ActiveSync (v.4.5 or higher). For more information about ActiveSync setup, see ActiveSync Communication on page 3-18. Note: You can also purchase a serial HomeBase with a standard DB9 connector for RS-232 communication. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 9-3 Powering the HomeBase Device The terminal requires 5 volts DC input for communication and battery charging; the power adapter on the power cable converts the voltage from the power source to 5 volts DC. Only power adapter cables from Honeywell convert the voltage appropriately. The same power cable that ships with each terminal can be used to power the HomeBase. This cable contains a plug adapter for each geography (US, UK, EU, etc.). Plug Adapter Power Adapter Power Cable 1. Attach the appropriate plug adapter to the power adapter. 2. Plug the power cable into the power source. 3. Plug the connector into the DC power jack on the back panel. The HomeBase is now powered. When a terminal is properly seated in the terminal well, the HomeBase powers the terminal, charges the terminal’s main battery pack, and launches ActiveSync (see ActiveSync Communication on page 3-18). Honeywell recommends that you leave the HomeBase connected to its power source at all times, so that it is always ready to use. 9-4 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Charging the Main Battery The HomeBase powers the terminal and fully charges its main battery pack in less than four hours. As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-Ion batteries. The process monitors changes in temperature, current, and voltage. Inserting a Terminal 1. Install the battery pack in the terminal; see Install the Main Battery on page 2-1. 2. Power the Dolphin HomeBase device; see Powering the HomeBase Device on page 9-4. 3. Slide the terminal into the terminal well until the Dock LED lights green to indicate that the terminal is properly seated. 4. The battery pack begins charging. Checking Battery Power To check battery power while the terminal is operating, tap Start > Settings > System tab > Power Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 9-5 Mounting the Dolphin HomeBase Device If you want to mount the HomeBase to a vertical surface, be sure to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is seated in the HomeBase. Back Panel Dimensions .15 in. (3.85 mm.) .32 in. 8.06mm Diameter, 2 places 1.44 in. (36.7 mm.) .53 in. 13.65mm, 2 places 3.99 in. (101.42 mm.) 1.85 in. (46.87 mm.) 4.35 in. (110.47 mm.) Mounting Guidelines 1. Before you begin, make sure you have two screws that are size #4–diameter measurement of 0.112 in. (2.845 mm). 2. Drill two holes into the wall. The holes should be located approximately 1.44 in. (36.7 mm) apart. 3. Insert a screw into each hole, leaving 0.2 in. (5 mm) of its head exposed. 9-6 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Bottom Panel Dimensions .55 in. (14.07 mm.) .67 in. (16.97 mm.) 3.73 in. (94.88 mm.) Note: The pivot connector should be facing straight out the bottom panel (as shown) when mounting the HomeBase to a vertical surface. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 9-7 9-8 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 10 Dolphin QuadCharger Device Overview The Dolphin QuadCharger device is a four-slot charging station that charges up to four Li-ion battery packs in four hours. For more details about charging, see Battery Charging on page 10-3. Use only the peripherals, power cables, and power adapters from Honeywell. Use of peripherals, cables, or power adapters not sold/manufactured by Honeywell may result in damage not covered by the warranty. Use only the Li-ion battery packs provided by Honeywell. Use of any battery not sold/manufactured by Honeywell may result in damage not covered by the warranty. Front Panel Power LED Charging Slots Status LEDs Charging Slots The QuadCharger device contains four charging slots. Each slot holds one battery. When a battery is placed in a slot, it immediately begins charging and its Status LED lights. Power LED This LED lights green after power has been applied and the QuadCharger device has completed initialization. Status LEDs A status LED is located above each of the four battery slots. The color of the LED indicates the charge status of the batteries in the slot. Green (solid) Orange (solid) Red (flashing) Dolphin® 7600 Mobile Computer User’s Guide–Preliminary The battery has completed its charge cycle and is ready for use. The battery is properly seated and charging. An error occurred during the most recent charge cycle. Rev (b): Preliminary 9/29/2008 10 - 1 Back Panel Power Supply Connector Power Switch Power Supply Connector Use this connector to attach the power supply to the QuadCharger device. The universal power supply accepts input voltages between 90-265 volts. Power Switch Toggle the power switch to turn the QuadCharger device on and off. Supplying Power to the QuadCharger Device Use the power adapter cable that comes with the QuadCharger device so that the input voltage is adjusted appropriately. 1. Locate the AC power adapter cable and plug it into the power source. 2. Connect the power cable to the power adapter. 3. Connect the power cable to the power supply connector on the back of the QuadCharger device. 4. Press the power switch to the ON position. 5. The device performs the following power-up diagnostic routine for each slot indicated by the Status LEDs: • • • • • • • 10 - 2 All ON Orange delay (500ms) All ON Red delay (500ms) All ON Green delay (500ms) All OFF Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Battery Charging Inserting and Removing Battery Packs To insert a battery pack, place the end of the battery without the locking tab into the bottom of the charging pocket and snap the battery into place with a hinging motion. To remove a battery pack, push the locking tab down and pull the battery away from the charging slot with a hinging motion. Charging Process The QuadCharger device charges Li-ion battery packs in four hours. Each charging slot works independently of the other three. As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-Ion batteries. The process monitors changes in temperature, current, and voltage. Temperature The QuadCharger device charges Li-ion battery packs in four hours when charged within the recommended temperature range of 50° to 95° F (10° to 35°C). Temperature has a significant effect on charging. For best results, battery packs should be at room temperature before inserting in the QuadCharger device. When the battery temperature exceeds 40°C, the QuadCharger device may exceed the stated four-hour charge time. The QuadCharger device stops charging if the battery temperature is greater than 40°C but will begin charging again when the battery temperature is less than 40°C. To Charge Batteries 1. Supply the QuadCharger device with power and turn the power switch on. 2. Insert batteries into the appropriate slots. The Status LED for each slot turns orange to indicate that the battery is properly seated and has begun a charge cycle. 3. When the Status LED turns green, the battery in the slot has completed charging. Recommendations for Storing Batteries To maintain top performance from batteries, follow these storage guidelines: • Avoid storing batteries outside of the specified temperature range of -4 to 122° F (-20 to 50°C) or in extremely high humidity. • For prolonged storage, do not keep batteries stored in a charger that is connected to a power source. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 10 - 3 Mounting the QuadCharger Device The QuadCharger device should be mounted on a dry, stable surface such as a desktop or workbench, or a flat, vertical surface such as a wall. Mounting Location When choosing a location for the QuadCharger device: • Keep in mind that the mounting location must allow users easy access to power switch and power connector. • Do NOT place the QuadCharger device in an enclosed space because restricted air flow can cause the temperature to elevate, which can effect charging. For more information, see Battery Charging on page 10-3. Mounting Process To mount the QuadCharger device, slide the DIN Rail into the slot on the bottom panel. Then, using the appropriate nuts and bolts, secure the DIN rail to the desk or wall. 10 - 4 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Bottom Panel Mounting Dimensions 11 in. (278.93 mm.) 4.78 in. (121.4 mm.) 1.42 in. 1.17 in. (36 mm.) (29.7 mm.) 6.17 in. (156.8 mm.) .99 in. (25.2 mm.) .13 in. (3.4 mm.) .99 in. (25.2 mm.) DIN Rail Dimensions .14 in. (3.6 mm.) .7 in. (17.8 mm.) .98 in. (25 mm.) .25 in. 1.38 in. (6.3 (35 mm.) mm.) 1 in. (27mm.) .04 in. (1 mm.) Mounting Guidelines 1. Before you begin, make sure you have two screws that are size #5–diameter measurement of 0.125 in. (3.18 mm). 2. Drill two holes into the wall, using the slots of the DIN Rail to locate. To ensure stability, holes should be located at least 4 inches (101.6mm) apart. 3. Insert a screw into each hole. The screw heads should be flush with the surface of the DIN rail, Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 10 - 5 Troubleshooting If you encounter problems with the QuadCharger device, refer to chart below for possible solutions. If problems persist, please contact Technical Assistance (see page 13-2). Problem Issue The Status LED does not come on when I insert a battery pack into a slot. Check the power connections on the QuadCharger device; make sure the POWER switch is ON and the battery pack is properly seated. The Status LED lights red during charging. Try to charge the battery in one of the other charging slots. If the red Status LED comes on again, then the problem is associated with the battery pack. If the red status stays with the charging slot, the problem is associated with the charging circuitry. The Status LED lights red and stays on without a battery in the charging slot. An error occurred during the self-diagnostic test for that particular charging pocket. Call Honeywell Product Service and Repair (see page 13-1) to request an RMA. 10 - 6 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 11 Dolphin Mobile Mount Overview The Dolphin Mobile Mount provides easy and secure access to the Dolphin terminal in mobile environments. Use only the peripherals, power cables, and power adapters from Honeywell. Use of peripherals, cables, or power adapters not sold/manufactured by Honeywell may result in damage not covered by the warranty. Out of the Box The Dolphin Mobile Mount ships with • The plastic mount, which holds one Dolphin 7600 terminal • A standard, RAM (101-B) mounting bracket with two universal ball joints. • The nuts and bolts required for installation. Note: The Dolphin Mobile Mount is not intended for use the imaging/scanning applications. Inserting a Terminal Note: It is recommended that you install one of the ball mounts on the back panel before inserting a terminal; see Mounting on page 11-3. 1. Insert the back panel of a Dolphin 7600 terminal and gently place the lip of the top of the latch in place at the bottom of the image engine window. Latch Do NOT pull back on the latch and snap in place! Make sure that the Dolphin terminal is securely fastened inside the mount but do not use excessive force. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 11 - 1 2. The latch at the top should grip the back of the image engine window slot. Image Engine Window 11 - 2 Latch Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Mounting The Dolphin Mobile Mount ships with a standard RAM mount (101B). You attach one ball joint that you attach to the back panel of the mount (with the fasteners provided). Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 11 - 3 Then, you attach the rest of the RAM mount. Then, fasten the RAM mount to a stable surface. 11 - 4 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 12 Technical Specifications Terminal Technical Specifications Basic Features Operating System: Windows Mobile 6.0 Development Environment: Honeywell SDK for Windows Mobile 6.0 Supported Software: SOTI MobiControl (remote device management) PowerNet™ Terminal Emulation (TNVT, 3270, 5250) ITScriptNet™ Installed Applications: Honeywell Power Tools and Demos and ITScriptNet Ready-To-Go applications CPU: Samsung 2440 400 MHz Memory: 128MB RAM X 128MB Flash Mass Storage: User-accessible microSD™/microSDHC™ Display: 2.8 in. 1/4 VGA, 240 X 320, TFT color display with touch screen Keyboards: 29-key numeric keyboard with shifted alpha and six(6) programmable keys 38-key alpha keyboard with shifted numeric and two(2) programmable keys Backlit Sound/ Voice: On-board speaker, microphone, and standard 2.5mm headset jack Communications: RS-232/USB connector, IrDA port Power: Li-ion battery 3.7V / 3240 mAh / 12.0 Wh Charging: 5.0V DC input through side access or USB/Serial connector Charging Peripherals: AC wall adapter Charge/Communication Cable HomeBase: Single-bay terminal charger QuadCharger: Four-bay battery charger Imager Scanner Engines Available Engines: 5300SR VGA Area Imager with High-Vis bracket aimer Caution - use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. 1D Symbologies: Codabar, Code 3 of 9, Code 11, Code 32, Pharmaceutical (PARAF), Code 93, Code 128, EAN with Add-On, EAN with Extended Coupon Code, EAN-8, EAN-13, GS1-128, GS1 Databar, Interleaved 2 or 5, ISBT 128, Matrix 2 of 5, MSI, Plessey, PosiCode, Straight 2 of 5 IATA, Straight 2 of 5 Industrial, Telepen, Trioptic Code, UPC, UPC-A, and UPC-E 2D Symbologies: Aztec, Codablock, Code 16K, Code 49, Composite, Data Matrix, GS1 Databar, MaxiCode, Micro PDF, OCR, PDF417, and QR Code Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 12 - 1 Terminal Technical Specifications Composite Codes: Aztec Mesa, Codablock F, EAN·UCC, GS1 Databar-14 OCR: OCR-A, OCR-B, OCR-US Money Font Postal Codes: Postnet and most international 4 state codes, Australian Post, British Post, Canadian Post, China Post, Japanese Post, KIX (Netherlands) Post, Korea Post, Planet Code Wireless WLAN (optional): 802.11b/g WLAN Security: WEP, WPA Personal/Enterprise, WPA2 Personal/Enterprise, EAP-TLS, TTLS, LEAP, PEAP, WiFi (WPA2), Cisco CCX v4 (pending) WPAN (standard): Bluetooth Class 2, version 1.2 Physical Operating Temperature: 14° to 122°F (-10° to 50°C) Charging Temperature: 32° to 104°F (0° to 40°C) Relative Humidity: 95% humidity (non-condensing) Construction: High-impact, resistant PC/ABS housings Magnesium alloy internal chassis with component shock mounts Structural: 5 ft.(1.5m) multiple drops to concrete, all axis, across operating temperature range ESD: Air: +/- 12k Vdc Direct: +/- 8k Vdc Environmental: IP54 rating rated for blown dust and water intrusion Dimensions: (Long x Wide x Deep) 7.1 in. X 2.7 in. X 1.9 in. (18 cm. X 6.9 cm. X 4.7 cm.) Weight: Approximately 14.3 oz./406g Regulatory & Compliance: Safety: cUL 60950, NOM, EN60950, BSMI CN14336, CCC GB4943, PSB, SIRIM EMC: FCC Part 15 Class B, ICES-003, EN301 489-1, EN301 489-17, EN55022, EN55024, BSMI CNS13438, CCC GB9254, MIC, AS/NZS 3548, FCC Parts 22H & 24H, FCC SAR OET 65, EN301511, RSS-132/133 Radio: FCC 15.247, RSS-210, COFETEL, EN300 328-1, EN300 328-2, SRRC ETS 300 328, IDA, SIRIM, MIC, ARIB STD-T33 & T66, AS/NZS 4771 12 - 2 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Dolphin HomeBase Device Structural Dimensions 4 in. high X 4.4 in. wide X 3.7 in. deep (10.2 cm. X 11.2 cm. X 9.4 cm.) Weight 11.2 oz. (318g) Material Polycarbonate ABS blend Color Gray Mounting Two keyholes on the back panel for wall-mounting Capacity One Dolphin terminal Environmental Operating Temperature Charging Temperature 32° to 104°F (0° to 40°C) Storage Temperature -4° to 140°F (-20° to +60°C) Electrical Static Discharge 8 KVA immunity on all surfaces Humidity 90% relative humidity (non-condensing) Power Supply Input (Universal) (from the power source) 100–240 Volts, 0.5 A 50–60Hz Output (to the HomeBase) 5 Volts DC, 3.0 A Charging Standard Charge Four hours or less Max Charging Current 2A Max Standby Current <100mA Status LED Green: Dolphin terminal is properly seated in the HomeBase. Communication Interface USB B Male connector supports data transmission of up to12 Mbps OR Standard DB9 serial connector supports data transmission up to 115 Kbps Agency Approvals Power Supply: UL listed TUV licensed Power Supply compliant to FCC part 15, Class B Charging: CE Marking (EMC) Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 12 - 3 Dolphin HomeBase Device Fire Retardant: 12 - 4 UL 94-VO Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Dolphin QuadCharger Device Structural Dimensions 11 in. long X 4.8 in. wide X 1.5 in. high (27.9 cm. long X 12.2 cm. wide X 3.8 cm. high) Weight 15.1 oz. (428g) Material Case: Polycarbonate ABS blend Color: Gray Mounting Use DIN rail slide to mount to a desktop or wall; see DIN Rail Dimensions on page 10-5. Capacity Supports up to four Li-ion battery packs Environmental Operating Temperature Charging Temperature 32° to 104°F (0° to 40°C) Storage Temperature -4° to +140°F (-20° to +60°C) Electrical Static Discharge 8 KVA immunity on all surfaces Humidity 90% relative humidity (non-condensing) Power Supply Input (Universal) 100V-240V, 0.8 A 50-60Hz Output 12Volts DC, 2.5 A Charging Standard Charge Four hours or less Status LEDs See Status LEDs on page 10-1. Agency Approvals Power Supply UL listed TUV licensed Power Supply compliant to FCC part 15, Class B Charging CE Marking CISPR Pub 22 Fire Retardant UL94 V-0 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 12 - 5 12 - 6 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary 13 Customer Support Product Service and Repair Honeywell provides service for all its products through service centers throughout the world. To obtain warranty or non-warranty service, contact the appropriate location below to obtain a Return Material Authorization number (RMA #) before returning the product. North America Telephone: (800) 782-4263 Fax: (803) 835-8012 E-mail: naservice@handheld.com Latin America Telephone: (803) 835-8000 Telephone: (800) 782-4263 Fax: (239) 263-9689 E-mail: laservice@handheld.com Brazil Telephone: +55 (21) 3535-9100 Fax: +55 (21) 3535-9105 E-mail: brservice@handheld.com Mexico Telephone: +52 (55) 5203-2100 Fax: +52 (55) 5531-3672 E-mail: mxservice@handheld.com Europe, Middle East, and Africa Telephone: +31 (0) 40 2901 633 Fax: +31 (0) 40 2901 631 E-mail: euservice@handheld.com Asia Pacific Telephone: +852-2511-3050 Fax: +852-2511-3557 E-mail: apservice@handheld.com Japan Telephone: +813-5770-6312 Fax: +813-5770-6313 E-mail: apservice@handheld.com Online Product Service and Repair Assistance You can also access product service and repair assistance online at www.honeywell.com/aidc. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 13 - 1 Technical Assistance If you need assistance installing or troubleshooting your device, please call your distributor or the nearest technical support office: North America/Canada Telephone: (800) 782-4263 (8 a.m. to 6 p.m. EST) Fax number: (315) 554-6705 E-mail: natechsupport@handheld.com Latin America Telephone: (803) 835-8000 Telephone: (800) 782-4263 E-mail: latechsupport@handheld.com Brazil Telephone: +55 (21) 3535-9100 Fax: +55 (21) 3535-9105 E-mail: brsuporte@handheld.com Mexico Telephone: (803) 835-8000 E-mail: latechsupport@handheld.com Europe, Middle East, and Africa Telephone: +31 (0) 40 7999 393 Fax: +31 (0) 40 2425 672 E-mail: euro.support@handheld.com Asia Pacific Telephone - Hong Kong: +852-3188-3485 or 2511-3050 Telephone - China: +86 21 6361 3818 E-mail: aptechsupport@handheld.com Japan Telephone: +813 5770-6312 E-mail: aptechsupport@handheld.com Malaysia Telephone: +603-6201-7020 E-mail: aptechsupport@handheld.com Online Technical Assistance You can also access technical assistance online at www.honeywell.com/aidc. 13 - 2 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Limited Warranty Honeywell International Inc. ("Honeywell") warrants its products to be free from defects in materials and workmanship and to conform to Honeywell’s published specifications applicable to the products purchased at the time of shipment. This warranty does not cover any Honeywell product which is (i) improperly installed or used; (ii) damaged by accident or negligence, including failure to follow the proper maintenance, service, and cleaning schedule; or (iii) damaged as a result of (A) modification or alteration by the purchaser or other party, (B) excessive voltage or current supplied to or drawn from the interface connections, (C) static electricity or electro-static discharge, (D) operation under conditions beyond the specified operating parameters, or (E) repair or service of the product by anyone other than Honeywell or its authorized representatives. This warranty shall extend from the time of shipment for the duration published by Honeywell for the product at the time of purchase ("Warranty Period"). Any defective product must be returned (at purchaser’s expense) during the Warranty Period to Honeywell’s factory or authorized service center for inspection. No product will be accepted by Honeywell without a Return Materials Authorization, which may be obtained by contacting Honeywell. In the event that the product is returned to Honeywell or its authorized service center within the Warranty Period and Honeywell determines to its satisfaction that the product is defective due to defects in materials or workmanship, Honeywell, at its sole option, will either repair or replace the product without charge, except for return shipping to Honeywell. EXCEPT AS MAY BE OTHERWISE PROVIDED BY APPLICABLE LAW, THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER COVENANTS OR WARRANTIES, EITHER EXPRESSED OR IMPLIED, ORAL OR WRITTEN, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. HONEYWELL’S RESPONSIBILITY AND PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT WITH NEW OR REFURBISHED PARTS. IN NO EVENT SHALL HONEYWELL BE LIABLE FOR INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, AND, IN NO EVENT, SHALL ANY LIABILITY OF HONEYWELL ARISING IN CONNECTION WITH ANY PRODUCT SOLD HEREUNDER (WHETHER SUCH LIABILITY ARISES FROM A CLAIM BASED ON CONTRACT, WARRANTY, TORT, OR OTHERWISE) EXCEED THE ACTUAL AMOUNT PAID TO HONEYWELL FOR THE PRODUCT. THESE LIMITATIONS ON LIABILITY SHALL REMAIN IN FULL FORCE AND EFFECT EVEN WHEN HONEYWELL MAY HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH INJURIES, LOSSES, OR DAMAGES. SOME STATES, PROVINCES, OR COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. All provisions of this Limited Warranty are separate and severable, which means that if any provision is held invalid and unenforceable, such determination shall not affect the validity of enforceability of the other provisions hereof. Use of any peripherals not manufactured/sold by Honeywell may result in damage not covered by this warranty. This includes but is not limited to: cables, power supplies, power adapters, cradles, and docking stations. Honeywell extends these warranties only to users of the products. These warranties are non-transferable. The limited duration of the warranty for the Dolphin 7600 series of products is as follows: • The duration of the limited warranty for terminals with an integrated imager is one year. • The duration of the limited warranty for touch screens is one year provided that a screen protector is applied and an approved stylus is used for the 12-month duration covered by the warranty. • The duration of the limited warranty for the Dolphin HomeBase device and Dolphin QuadCharger device is one year. • The duration of the limited warranty for batteries is one year. Use of any battery not sold/manufactured by Honeywell may result in damage not covered by the warranty. Batteries returned to Honeywell in a reduced state may or may not be replaced under this warranty. Battery life will be greatly increased when following the battery instructions in the Dolphin 7600 Mobile Computer User’s Guide. Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Rev (b): Preliminary 9/29/2008 13 - 3 How to Extend Your Warranty Honeywell offers a variety of service plans on our hardware products. These agreements offer continued coverage for your equipment after the initial warranty expires. For more information, contact your Sales Representative, Customer Account Representative, or Product Service Marketing Manager from Honeywell, or your Authorized Reseller. 13 - 4 Rev (b): Preliminary 9/29/2008 Dolphin® 7600 Mobile Computer User’s Guide–Preliminary Honeywell 700 Visions Drive P.O. Box 208 Skaneateles Falls, NY 13153-0208 ™ 76-WM-UG Rev (b): Preliminary 9/29/2008
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Page Mode : UseOutlines XMP Toolkit : 3.1-702 Format : application/pdf Description : First release of the GSM book Title : Dolphin 7600 (WM6) User’s Guide Rev A Creator : Jessica Nealon Producer : Acrobat Distiller 8.1.0 (Windows) Creator Tool : FrameMaker 8.0 Modify Date : 2008:09:29 13:15:41-07:00 Create Date : 2008:09:29 10:15:24Z Metadata Date : 2008:09:29 13:15:41-07:00 Document ID : uuid:d794a0d7-d2a8-4ed3-ae98-f7e49af41b51 Instance ID : uuid:5292a24f-1fe7-4114-b373-13554293934a Page Count : 126 Subject : First release of the GSM book Author : Jessica NealonEXIF Metadata provided by EXIF.tools