Honeywell 8000 Users Manual 69 1871 1 VisionPRO Thermostats
Honeywell Thermostat 8000 69-1871
8000 to the manual afc78079-3607-458b-a971-e9cc10ed477d
2015-01-23
: Honeywell Honeywell-8000-Users-Manual-261979 honeywell-8000-users-manual-261979 honeywell pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Table 1. Installer Setup Setup functions Setting & Options (factory default in bold) Table 1. Installer Setup Setup functions Setting & Options (factory default in bold) 0520 U/V lamp change reminder 0 1 Off 365 calendar days 0530 Adaptive Intelligent RecoveryTM 1 0 On Off 1 Program periods 4 4 periods (Wake, Leave, Return, Sleep) 2 periods (Wake, Sleep) 3 0540 2 0580 0600 Compressor protection Heat temperature range stop 5 90 Cool temperature range stop 50 0640 Clock format 0650 5-minute compressor off time [Other options: 0–4 minutes] 0680 0690 Heat temperature control Cool temperature control Max. heat temperature setting is 90°F (32°C) [Other options: 40-89°F (4°C to 32°C)] 2 2 1 3 Standard temperature control (recommended) Select if inside temperature is consistently over setting Select if inside temperature is consistently under setting Standard temperature control (recommended) Select if inside temperature is consistently over setting Select if inside temperature is consistently under setting Min. cool temperature setting is 50°F (10°C) [Other options: 51-99°F (11°C to 37°C)] 0700 Temperature display offset 0 No offset [Other options: -3, -2, -1, 1, 2, 3°F (-1.5°C to 1.5°C)] 12 24 12-hour time 24-hour time 0710 RESET 0 1 Extended fan timer (heat) 0 90 Off Fan runs for 90 seconds after call for heat ends No reset Reset installer options & program schedule to factory default 0660 Extended fan timer (cool) 0 90 Off Fan runs for 90 seconds after call for cooling ends 0670 Keypad Lockout 0 1 2 Unlocked Partially locked Fully locked 0610 INSTALLER SYSTEM TEST system tests The Installer Test is part of the Installer Setup Menu. Test the system’s heating, cooling, fan and emergency heat. Available tests vary by thermostat and system type. 1. Enter the Installer System Test by entering the Installer Setup and pressing t repeatedly until “Test” appears. Table 2. Installer System Test System Test Number Test 1 Test Type Cooling System 0 Test 1 DONE 2 M24083 2. Use arrow to change test and system status as required. TEST NUMBER System Status Number and Description Test 2 Fan System Test Test 3 Heating System 0 Test 1 2 SYSTEM STATUS 0 1 3 Test 4 Emergency Heat Test 0 1 2 Off Compressor and fan on Second stage compressor on Off Fan on Off Heat on Second stage heat (Aux. heat) on Third stage heat (Auxiliary heat) on VisionPRO® 8000 Thermostats Installer Setup and System Test pocket Guide Off Em. Heat and fan on Auxiliary heat on Press the DONE button to exit the Installer System Test. caution DONE M24085 3. Press DONE to exit. EQUIPMENT DAMAGE HAZARD. Compressor protection is bypassed during testing. To prevent equipment damage, avoid cycling the compressor quickly. installer setup 1. Press SYSTEM. FAN ON Inside AUTO SYSTEM HEAT AM SCHED HOLD M24079 6 7 8 9 69-1871-1 2. Press and hold these two blank buttons until the display changes. SYSTEM Table 1. Installer Setup Setup functions 0170 HEAT System type M24080 3. Use arrows to change settings as required. SETTING FUNCTION 1 2 3 4 5 6 7 CANCEL DONE Setting & Options (factory default in bold) 8 9 10 11 12 DONE M24082 4. 0180 Press DONE to exit and save settings. installer setup functions Available option and default settings vary by thermostat. Fan control (heating) 0 1 Setting & Options (factory default in bold) 0120 Year (first two digits) 20 (2000-2099) 21 (2100-2178) 0130 Year (second two digits) 06 (2006) [Other options 0-99] 0140 Month 6 [Other options 1-12] 0150 Day 15 [Other options 1-31] 0160 Schedule format 4 0 Gas/Oil heat (equipment controls heating fan) Electric furnace (thermostat controls heating fan) 0190 Changeover valve 0 (O/B terminal) 1 0200 Auxiliary heat 0 1 Electric backup heat Fossil fuel backup heat 0210 External fossil fuel kit 1 External fossil fuel kit controls backup heat Thermostat controls backup heat (outdoor sensor required) First stage compressor cycle rate 3 Second stage compressor cycle rate 3 0 Table 1. Installer Setup Setup functions 1 heat / 1 cool Conv. 1 heat / 1 cool heat pump (no Aux. heat) Heat only (2 wire) Heat only with fan Hot water Series 20 Cool only 2 heat / 1 cool heat pump (with Aux. heat) 2 heat / 2 cool multistage 2 heat / 1 cool multistage 1 heat / 2 cool multistage 2 heat / 2 cool heat pump (no Aux. heat) 3 heat / 2 cool heat pump (with Aux. heat) 0220 0230 Table 1. Installer Setup Setup functions 0240 First stage heat cycle rate Recommended [Other options: 1–6] 5 1 3 9 0250 Second stage heat cycle rate 5 1 3 9 0260 Third stage heat cycle rate Controls valve in cooling Controls valve in heating Recommended [Other options: 1–6] Setting & Options (factory default in bold) 9 1 3 5 0270 Emergency heat cycle rate 9 1 3 5 Gas or oil furnaces of less than 90% efficiency Steam or gravity Hot water systems or furnaces of 90%+ efficiency Electric furnaces [Other options: 1–12] Gas or oil furnaces of less than 90% efficiency Steam or gravity Hot water systems or furnaces of 90%+ efficiency Electric furnaces [Other options: 1–12] Electric auxiliary heat or electric furnaces Steam or gravity Hot water systems or furnaces of 90%+ efficiency Gas or oil furnaces of less than 90% efficiency [Other options: 1–12] Electric auxiliary heat or electric furnaces Steam or gravity Hot water systems or furnaces of 90%+ efficiency Gas or oil furnaces of less than 90% efficiency [Other options: 1–12] 0280 Backlight 0 1 Backlight on keypress Continuous backlight (requires 24VAC connection) 0300 Manual/auto changeover 0 Manual changeover (Heat/Cool/Off) Automatic changeover (Heat/Cool/Auto/Off) 1 7-day programming Non-programmable Table 1. Installer Setup Setup functions Setting & Options (factory default in bold) 0310 Auto changeover deadband 3 Heat/cool temperature 3°F apart (1.5°C) [Other options: 2-9 (2°F9°F/1°C-5°C)] 0320 Temperature display 0 1 Fahrenheit Celsius 0330 Daylight savings 1 Auto-change to daylight savings time (through 2006) Auto-change to daylight savings time (2007 and beyond) Daylight savings time is turned off 2 0 0340 Remote sensor 0 1 2 3 0350 Heat pump compressor lockout 0 Off [Other options: 15, 20, 25, 30, 35, 40°F (-9.5°C to 7°C)] 0360 Heat pump auxiliary lockout 0 Off [Other options: 40, 45, 50, 55, 60°F (4.5°C to 15.5°C)] 0380 Dehumidification Control 0 1 Off A/C runs to help dehumidify 0500 Furnace filter change reminder 0 1 Off 10-day run time (about 1 month) 30-day run time (about 3 months) 60-day run time (about 6 months) 90-day run time (about 9 months) 120-day run time (about 1 year) 365-day run time (about 3 years) 2 3 4 5 6 0510 2 3 4 No remote sensor Outdoor sensor (display only) Outdoor sensor for control (select heat pumps) Indoor sensor Humidifier pad change reminder 0 1 2 3 5 Off 90 calendar days 180 calendar days 365 calendar days Printed in U.S.A. on recycled paper containing at least 10% post-consumer paper fibers. Automation and Control Solutions Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 Honeywell Limited-Honeywell Limitée 35 Dynamic Drive Toronto, Ontario M1V 4Z9 http://yourhome.honeywell.com ® U.S. Registered Trademark © 2006 Honeywell International Inc. US Patent No. 6595430, D509151; other Patents Pending. All Rights Reserved 69-1871-1 M.S. Rev. 09-06
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Extract, Assemble, Print high-res Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Instance ID : uuid:1293162e-895f-4dbd-9e27-a532cea021a0 Document ID : adobe:docid:indd:a26df262-419f-11db-acc5-b815ea90a6f6 Rendition Class : proof:pdf Derived From Instance ID : e32165b6-4d38-11da-acb2-dec9ed1274b4 Derived From Document ID : adobe:docid:indd:f9efe3b8-3c08-11da-8645-f0e5d10a0cab Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:F11BFE7C2B3CDA119A97B35F3E5CC92A, uuid:92279A82B144DB119D26E38CCAA9571F, uuid:72329D1E2344DB11A8E4911D6978BB69, uuid:94279A82B144DB119D26E38CCAA9571F, uuid:93279A82B144DB119D26E38CCAA9571F, uuid:F11BFE7C2B3CDA119A97B35F3E5CC92A, uuid:2284E468D61FDA11A85980F80C0AA5D7, uuid:91279A82B144DB119D26E38CCAA9571F, uuid:F4242B515B42DB1182CFE6ABDB5680FF Manifest Reference Document ID : uuid:039BA90F113CDA11A04DCF547A1312D6, uuid:E1AC91FFB841DB119E0792E654047C9F, uuid:5168D413183BDA118948D97640965E4F, uuid:039BA90F113CDA11A04DCF547A1312D6, uuid:2184E468D61FDA11A85980F80C0AA5D7, uuid:5868D413183BDA118948D97640965E4F Create Date : 2006:09:15 07:10:13-05:00 Modify Date : 2007:05:07 15:57:24-05:00 Metadata Date : 2007:05:07 15:57:24-05:00 Creator Tool : Adobe InDesign CS2 (4.0.4) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 6377 bytes, use -b option to extract) Format : application/pdf Title : 69-1871-1 - VisionPRO 8000 Thermostats Description : Pocket Guide Creator : Honeywell Producer : Adobe PDF Library 7.0 Trapped : False Page Count : 2 Subject : Pocket Guide Author : HoneywellEXIF Metadata provided by EXIF.tools