Honeywell Equip Hd3Mdih Users Manual HD3MDIH/X Series Indoor High Resolution True Day/Night IP Dome Camera User Guide

2015-01-23

• Contents
• Figures
• Tables
• About This Document
  • Overview of Contents
  • Cautions and Warnings
  • FCC Compliance Statement
  • Manufacturer’s Declaration of Conformance
    • North America
    • Europe
  • Warranty and Service
• Introduction 1
  • Features
• Installation and Setup 2
  • Before You Begin
    • Unpack Everything
    • Equipment Required
  • Overview of Installation Procedure
  • Camera Components and Functions
  • Camera Installation
    • Preparing the Camera
    • Preparing the Mounting Surface
    • Connecting the Wires
      • Connecting Audio and Alarms
      • Connecting Power
      • Connecting to a Video Monitor
      • Connecting to a Network via an RJ-45 Ethernet Connector
    • Mounting the Camera
      • Surface Mount
      • Flush Mount (with or without 4S box)
    • Restore Factory Defaults
  • Adjusting the Camera FOV (Field of View)
    • Angle view
    • Adjusting the Lens Focus
  • Securing the Enclosure Cover
• Installing the Honeywell IP Utility and Web-Client Software 3
  • About the Honeywell IP Utility and Web-Client
    • About the Honeywell IP Utility
    • About the Web-Client
    • User Profiles: Honeywell IP Utility and Web-Client
  • Step 1: Confirm Your System Requirements
  • Step 2: Install the Honeywell IP Utility Software
    • Downloading the EQUIP Series Installation Guides
  • Step 3: Log Onto the IP Utility and Discover Network Devices
  • Step 4: Connect to a Device and Configure Network Settings
    • Connecting to or Disconnecting From Devices
      • Connecting to a Device
      • Disconnecting from a Device
    • Configuring the IP Network Settings Automatically or Manually
      • Updating IP Network Settings Automatically
      • Updating IP Network Settings Manually
    • Interfacing with the EQUIP Device Via a Network Video Recorder
  • Step 5: Launch the Web-Client to View Live Video
  • Uninstalling IP Utility, Bonjour or the ActiveX Plug-in Software
    • Uninstalling IP Utility Using the Start Menu
    • Uninstalling IP Utility or IP ActiveX Using the Control Panel
• IP Camera Web-Client 4
  • Overview
    • User Profiles
  • Logging On and Off the IP Web-Client
    • Launching the Web-Client from IP Utility
    • Logging Onto the Web-Client from Internet Explorer
    • Logging Out of the Web-Client
  • Navigating the Web-Client User Interface
  • Live View
    • Taking a SnapShot
  • Device Settings
    • Configuring IP and Firmware Settings
    • Resetting the Device
  • Compression Settings
    • Video Codec Settings Tab
      • Configuring the Compression Settings
    • Statistics: Received Bit Rate and Frame Rate
  • Camera Setup
    • Auto Exposure
    • White Balance
  • Video Analytics
    • Sabotage Detection
      • Configuring Video Blur Detection
      • Configuring Camera Blinding Detection
      • Configuring Camera Field of View Change Detection
    • Configuring Video Motion Detection
  • Alarm and Audio
    • Alarm Settings
    • Audio Settings
• Surface Mounting Template A
• Troubleshooting B
  • Technical Support
  • Problem: Lens Out of Optical Focus
  • Problem: Live View Does Not Display the Expected Video
  • Problem: Cannot Connect to a Device
• Specifications C
• Glossary D
• Index