Honeywell Smoke Alarm Ms 9600Ls Users Manual 52646

2015-01-23

• Table of Contents
• Section 1: Product Description
  • 1.1 Inventory
  • 1.2 Features and Options
  • 1.3 Specifications
    • 1.3.1 Current Availability
  • 1.4 Controls and Indicators
  • 1.5 Circuits
  • 1.6 Components
    • 1.6.1 Intelligent Addressable Detectors: Newer Series
    • 1.6.2 Intelligent Addressable Modules: Newer Series
    • 1.6.3 300 Series Intelligent Addressable Devices
    • 1.6.4 Addressable Device Accessories
  • 1.7 Optional Modules
  • 1.8 Accessories
    • 1.8.1 PS-Tools Programming Utility
    • 1.8.2 Dress Panel: DP-9692
    • 1.8.3 TR-CE Trim Ring
    • 1.8.4 Battery Box
    • 1.8.5 Battery Charger
      • CHG-75 Battery Charger
      • CHG-120 Battery Charger
    • 1.8.6 New ANN-BUS Annunciators/Devices
      • ANN-BUS Wiring
      • ANN-BUS Device Addressing
      • ANN-80 Remote Fire Annunciator
      • ANN-S/PG Serial/Parallel Interface Installation
      • ANN-I/O LED Driver Module*
      • ANN-LED Annunciator Module*
      • ANN-RLY Annunciator Module
      • ANN-BUS Audio Panel Control
    • 1.8.7 Legacy ACS Annunciators
  • 1.9 Getting Started
• Section 2: Installation
  • 2.1 Mounting
  • 2.2 Power
    • 2.2.1 AC Power and Earth Ground Connection
    • 2.2.2 Battery Power
    • 2.2.3 Special Application DC Power Output Connection
  • 2.3 Relays
  • 2.4 Notification Appliance Circuits
    • 2.4.1 Configuring NACs
    • 2.4.2 Style Y (Class B) NAC Wiring
    • 2.4.3 Style Z (Class A) NAC Wiring
  • 2.5 Power-limited Wiring Requirements
  • 2.6 Optional Modules and Devices
    • 2.6.1 DACT-UD2 Installation
    • 2.6.2 4XTMF Transmitter Module Installation
    • 2.6.3 Auxiliary Trouble Input (J16 & J17)
    • 2.6.4 SLC-2LS Expander Module
    • 2.6.5 Printer/PC
    • 2.6.6 Annunciators
      • Legacy ACM-8RF Relay Control Module
      • Legacy ACM Series Annunciators
• Section 3: Programming
  • 3.1 Programming Data Entry
  • 3.2 User Programming
  • 3.3 Initial Power-up
  • 3.4 Programming Screens Description
  • 3.5 Programming and Passwords
  • 3.6 Master Programming Level
    • 3.6.1 Autoprogram
    • 3.6.2 Point Program
      • Detector Programming
      • Module Programming
    • 3.6.3 Zone Setup
      • Enable
      • Disable
      • Zone 97, 98 and 99
      • Zones Installed
      • Zones Enabled
      • Zones Disabled
      • Zone Type
      • Zones Available
    • 3.6.4 Loop Setup
      • Loop Selection
      • Loop Protocol
    • 3.6.5 System Setup
      • Trouble Reminder
      • Banner
      • Time-Date
      • Timers
      • NAC (Notification Appliance Circuit)
      • Relays
      • Canadian Option
      • Waterflow Silenceable
    • 3.6.6 Verify Loops
    • 3.6.7 History
      • View Events
      • Erase History
    • 3.6.8 Walktest
    • 3.6.9 Option Modules
      • Annunciators/UDACT
      • On Board DACT
      • Printer/PC
    • 3.6.10 Password Change
    • 3.6.11 Clear Program
    • 3.6.12 Program Check
  • 3.7 Maintenance Programming Level
    • 3.7.1 Disable Point
    • 3.7.2 History
    • 3.7.3 Program Check
    • 3.7.4 Walktest
    • 3.7.5 System
    • 3.7.6 Zone Setup
      • Zones Installed
      • Zones Enabled
      • Zones Disabled
      • Zone Type
      • Zones Available
      • Zone Message
• Section 4: Operating Instructions
  • 4.1 Panel Control Buttons
    • 4.1.1 Acknowledge/Step
    • 4.1.2 Alarm Silence
    • 4.1.3 Drill/Hold 2 Sec
    • 4.1.4 Reset
  • 4.2 LED Indicators
  • 4.3 Normal Operation
  • 4.4 Trouble Operation
  • 4.5 Alarm Operation
  • 4.6 Supervisory Operation
  • 4.7 Process Monitor Operation
  • 4.8 Hazard Condition Operation
  • 4.9 Medical Alert Condition Operation
  • 4.10 Programmed Zone Operation
  • 4.11 Disable/Enable Operation
  • 4.12 Waterflow Circuits Operation
  • 4.13 Detector Functions
  • 4.14 Time Functions: Real-Time Clock
  • 4.15 NAC Operation
  • 4.16 Synchronized NAC Operation
  • 4.17 Coded Operation
  • 4.18 Presignal
  • 4.19 Positive Alarm Sequence
  • 4.20 Special System Timers
    • 4.20.1 Silence Inhibit Timer
    • 4.20.2 Autosilence Timer
    • 4.20.3 Trouble Reminder
    • 4.20.4 Waterflow Retard Timer
    • 4.20.5 Alarm Verification
  • 4.21 Walktest
  • 4.22 Read Status
    • 4.22.1 System Point
    • 4.22.2 Zones
    • 4.22.3 Power
    • 4.22.4 Trouble Reminder
    • 4.22.5 Timers
    • 4.22.6 NAC
    • 4.22.7 Relays
    • 4.22.8 Program Check
    • 4.22.9 History
    • 4.22.10 Annunciators
    • 4.22.11 Phone Line
    • 4.22.12 Central Station
    • 4.22.13 Service Terminal
    • 4.22.14 Printer/PC
    • 4.22.15 Print
    • 4.22.16 Time-Date
• Section 5: Power Supply Calculations
  • 5.1 Overview
  • 5.2 Calculating the AC Branch Circuit
  • 5.3 Calculating the System Current Draw
    • 5.3.1 Overview
    • 5.3.2 How to Use Table 5.3 on page 176 to Calculate System Current Draw
  • 5.4 Calculating the Battery Size
    • 5.4.1 NFPA Battery Requirements
    • 5.4.2 Selecting and Locating Batteries
• Appendix A: Software Zones
  • A.1 Correlations
• Appendix B: Default Programming
• Appendix C: NFPA Standard-Specific Requirements
  • C.1 Central Station/Remote Station Transmitter: Connection to FACP Dry Contacts
  • C.2 MBT-1 Municipal Box Trip - Silenceable
• Appendix D: FACP with Keltron
• Appendix E: Wire Requirements
  • E.1 NAC Wiring
• Appendix F: HVAC Control
  • F.1 Control Module Operation
    • F.1.1 HVAC SHUTDN
  • F.2 Monitor Module Operation
    • F.2.1 HVAC RESTART
    • F.2.2 HVAC OVRRIDE
• Appendix G: Canadian Application
• Index