Honeywell Universal Remote Udc3200 Users Manual Operator

2015-01-23

• Contacts
• Symbol Definitions
• Contents
• 1 Introduction
  • 1.1 Operator Interface
  • 1.2 Function of Displays and Keys
  • 1.3 CE Conformity (Europe)
• 2 Installation
  • 2.1 Pre-installation Information
  • 2.2 Model Number Interpretation
  • 2.3 Control and Alarm Relay Contact Information
  • 2.4 Mounting
  • 2.5 Wiring
    • 2.5.1 Electrical Considerations
  • 2.6 Wiring Diagrams
• 3 Configuration
  • 3.1 Configuration Prompt Hierarchy
  • 3.2 Configuration Procedure
  • 3.3 Tuning Set Up Group
  • 3.4 SP Ramp Set Up Group
  • 3.5 Accutune Set Up Group
  • 3.6 Algorithm Set Up Group
  • 3.7 Output Set Up Group
  • 3.8 Input 1 Set Up Group
  • 3.9 Input 2 Set Up Group
  • 3.10 Control Set Up Group
  • 3.11 Options Group
  • 3.12 Communications Group
  • 3.13 Alarms Set Up Group
  • 3.14 Display Set Up Group
• 4 Monitoring and Operating the Controller
  • 4.1 Operator Interface
  • 4.2 Entering a Security Code
  • 4.3 Individual key lockout
  • 4.4 Monitoring Your Controller
    • 4.4.1 Annunciators
    • 4.4.2 Viewing the operating parameters
    • 4.4.3 Diagnostic Messages
  • 4.5 Accutune III
    • 4.5.1 Tune for Simplex Outputs
    • 4.5.2 Tune for Duplex (Heat/Cool)
    • 4.5.3 Using AUTOMATIC TUNE at start-up for Duplex (Heat/Cool)
    • 4.5.4 Using BLENDED TUNE at start-up for Duplex (Heat/Cool)
    • 4.5.5 Using MANUAL TUNE at start-up for Duplex (Heat/Cool)
    • 4.5.6 Error Codes
  • 4.6 Fuzzy Overshoot Suppression
• 5 Troubleshooting/Service
  • 5.1 Background Tests
  • 5.2 Controller Failure Symptoms
• 6 Sales and Service