Honeywell Scanner Ms9520 Users Manual MetroSelect Single Line Configuration Guide

2015-01-23

• MetroSelect Configuration Guide
  • Disclaimer / Trademarks
  • Table of Contents
    • Introduction
      • Bar Code Configuration Methods
        • Single-Code Method
        • Multi-Code Method
      • Need To Start Over?
    • Code Types and Decode Rules
      • UPC/EAN
      • Code 128
      • Code 39
      • 2 of 5 Codes
      • Codabar
      • Code 93
      • Code 11
      • Telepen
      • Plessey Codes
      • Additional Decode Features
      • Configurable Code Lengths
    • Supplements
    • GS1 DataBar
      • GS1 DataBar Limited
      • GS1 DataBar Expanded
    • ISBT Code 128 Implementation
      • Configuration Mode
      • Concatenation Configuration Mode
      • Pre-Defined Concatenation Configuration Mode
      • User-Defined Concatenation Configuration Mode
    • Communications
    • Scanner Operation
      • Configuration Mode Options
      • Scan Buffers
      • Redundant Scans
      • Miscellaneous Decode Features
      • Same Symbol Time Outs
      • LED Options
      • Beeper Options
      • Data Transmission Delays
      • Communication Time Out Options
      • Host Scanner Commands
      • Test Modes
    • Prefixes/Suffixes
      • User Configurable Prefixes, All Data
      • User Configurable ID Characters, Code Specific
      • Standard Prefix Characters
      • Standard Suffix Characters
      • Longitudinal Redundancy Check
      • Block Check Character
      • Character Replacements
      • User Configurable Suffixes, All Data
      • Special Formats
    • Code Formatting
      • UPC/EAN Formatting
      • Codabar Formatting
      • Code 39 Formatting
      • Code 11 Formatting
      • Telepen
      • Plessey
      • 2 of 5 Code Formatting
    • RS232
      • Parity Features
      • Baud Rate
      • Data/Stop Bits
      • Hardware Handshaking
      • Software Handshaking
      • Miscellaneous
    • Keyboard
      • Enable Keyboard Emulation
      • Country/Scan Code Table Selects
      • Keyboard/System Type
      • ‘Dumb’ Terminal Selections
      • Special Keyboard Features
      • InterScan Code Delays
      • Control Sets
    • OCIA
    • Light Pen Parameters
      • Set Narrow Element Width
    • RS485 Configuration
      • IBM Port
      • IBM Reserved Codes
    • USB
    • Code Bytes Usage
      • Code Bytes 0–9
      • Reserved Codes
      • Code Type Table
      • ASCII Reference Table
      • Extended Key Code Reference Table
    • MS9520 Voyager® and MS9540 VoyagerCG® Series
      • Activation Range
      • Stand Scan Modes
      • CodeGate Status
      • Laser/Scan Modes
      • Same Symbol Time Outs
      • MS9520-00 and MS9540-00 Laser Emulation Mode
    • MS9524 and MS9544 VoyagerPDF® Series
      • PDF CodeGate Status
      • MicroPDF and Composite Code Handling
    • MS9535 VoyagerBT®
    • MS9535-5M VoyagerBT
      • Inventory Quantity Bar Codes
    • IS4125 and IS4225 Scan Engines
    • IS4823 and IS4825 Scan Engines
      • Operating Modes
    • Miscellaneous Features
      • Custom Defaults
      • Serial Program Mode
    • Customer Support
      • Technical Assistance
      • Product Service and Repair