Honeywell Switches And Sensors Users Manual Indcat_part1.p65

Switches and Sensors to the manual 8c77c58a-cc10-4345-9b5d-d6435203f7be

: Honeywell Honeywell-Switches-And-Sensors-Users-Manual-261950 honeywell-switches-and-sensors-users-manual-261950 honeywell pdf

Open the PDF directly: View PDF .
Page Count: 148

Download
Open PDF In Browser	View PDF

Industrial

Switches
and Sensors
Global switches

Heavy duty switches

Compact switches

Product solutions on the Interactive Catalogue

Precision switches

Hazardous location switches

Safety switches

Relays

Position products

Ultrasonic distance sensors

Pressure sensors

July 2003

Inside front
cover

WARNING
!
PERSONAL INJURY
DO NOT USE these products* as safety or emergency stop
devices, or in any other application where failure of the
product could result in personal injury.

*Does not apply to 24CE/924CE Series (page 23), GSS Series
(page 80), GK Series (pages 78, 83, 85) or CPS Series (page 89)

Failure to comply with these instructions could result in
death or serious injury.

2

WARNING
!
MISUSE OF DOCUMENTATION
• The information presented in this product sheet (or
catalogue) is for reference only. DO NOT USE this
document as product installation information.
• Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.

www.honeywell.com/sensing

CONTENTS
Introduction - How to use this catalogue

Page 2

EVN2000 Series
Fast Install Limit Switches

Page

A recent addition to our range. Saves over 50 % in installation
time with a design that eliminates the need to gain access to the
inside of the housing in order to connect the switch.

SZL-VL Series
Limit Switches

HDLS Series
Heavy Duty Limit Switches
Suitable for special applications in corrosive environments. Housed
in a rugged die-cast zinc body and epoxy coated for protection,
they are available with a range of switching and head options.

Explosion Proof Switches
Page

Page

Page

A range of switches designed for use in hazardous applications
in potentially explosive atmospheres. Most are UL-CSA listed and
some meet the requirement of the new European Directive 94/9/EC
(commonly referred to as the ATEX Directive).

New, economic, compact, rugged, dependable limit switches.

Levers for Limit Switches
GL Series EN50041/47
Global Limit Switches

Page

A complete range of CENELEC approved products,
suitable for most industrial applications.

Safety Switches for machine guarding

SL1 Series

Page

Space saving size for machine miniaturization,
different contact and actuators available.

Page

Miniature, rugged, pre-wired switches, meeting the requirements
of the Low Voltage directive. They come with a range of head
styles and sealing options.

24/924CE Series
Miniature Enclosed Switches

Page

Safety interlock switches, limit switches and cable-pull limit
switches for industrial machine safety.

Relays

14/914CE Series
Miniature Enclosed Switches

Page

A range of levers for use with Honeywell’s Limit Switches.
Select the best one for your application.

Page

Designed for a wide range of applications including power as
well as logic control for factory machines and control panels.

Linear and Rotary Position

Page

A wide selection of Hall-effect, magnetoresistive, and
potentiometric devices for detecting the presence of a magnetic
field or linear and rotary position.

Page

Opto Sensors

Page

Ultrasonic Distance Sensors

Page

Miniature, rugged, direct opening action contacts. This switch
is available with a variety of actuators and is pre-wired.

LS Series
Compact Limit Switches

Page

A range of compact limit switches designed for accurate
repeatability under the most stringent conditions. Special oil
resistant and high temperature versions are available.

BF Series
Medium Duty Limit Switches

Pressure sensors
Page

Rugged plastic enclosure, with large internal cavity for ease of wiring.

BZE/DTE Series
Medium Duty Limit Switches

Ultrasonic position sensors for presence/absence sensing,
precision distance sensing or tracking for areas where other
sensing technologies have difficulty, such as clear or
shiny objects, foggy or particle laden air, or splashing liquids.

Page

Page

We offer stainless steel and silicon pressure sensors depending
on the application, as well as a variety of high purity pressure sensors.

Honeywell Sensing and Control products

Page

Index

Page

Side or flange mount, momentary or maintained contact, sealed
or unsealed actuators, removal of bottom enclosure for ease of wiring.

BAF/DTF Series
High Capacity Enclosed Switches

Page

Rugged cast aluminium housed switches, sealed for
wash-down applications. Momentary or maintained contacts,
right or left hand actuators, 3 hole mounting.

www.honeywell.com/sensing

1

INTRODUCTION
HONEYWELL INDUSTRIAL SWITCHES AND SENSORS
Honeywell Industrial Switches and Sensors provide a wide selection of products and technologies for applications in most industrial applications. This catalogue
contains our most popular listings. To view our complete range of products, visit our website at http://www.honeywell.com/sensing.
Honeywell is a worldwide leader in advanced switching and sensing technology. Our reputation for technology, quality and reliability is second to none. We have
more than 60 years of experience; and extensive knowledge of Industrial applications, an extensive customer service and support network. Honeywell
manufactures the original MICROSWITCH brand switch and we offer one of the most complete lines of global electro-mechanical heavy duty limit switches.
Sealed versions keep out moisture and other contaminates. Explosion proof types are designed for use in hazardous locations. Safety versions provide direct
opening action contacts for machine guarding and emergency stops.
We are a recognized technology leader in the development and manufacture of pressure and position-sensing transducers and controls. We use the latest in
manufacturing technology to produce hundreds of thousands of transducers a year. Millions of units are currently performing in a multitude of continuous-duty
applications around the world, where they typically outlast the systems they support. We have ISO 9001 certified facilities and Class 10 cleanroom capability, and
we manufacture a full line of high purity pressure sensing and control products; each individually tested, inspected and certified to be in full compliance with the
product specification.
A comprehensive and diverse line of speed and position sensors for the Industrial market place is also available. With the combined capabilities of three wellknown product brands - Data Instruments, Clarostat, Electro and New England Instruments - Honeywell continuously strives to solve customers’ application
problems. Whether you need custom designed sensors for proprietary OEM applications or off-the-shelf sensor solutions, our extensive in-house design,
manufacturing and environmental testing capabilities offer solutions and alternatives to meet your needs.

2

www.honeywell.com/sensing

INTRODUCTION

How to use this catalogue
For each referenced listing, key specification parameters, descriptions and
mounting drawing information are presented. These illustrate our capabilities
while the specifications include allow easy differentiation between similar
products.
There are, of course, many more product options available. Full product
specification may be accessed on our website (www.honeywell.com/sensing).
At the Home page enter the catalogue listing reference in the SEARCH box and
click GO! This will take you directly to the interactive catalogue/specification
search tables for this listing. Alternatively select and click the interactive
catalogue icon on the Home page and then choose a product category against
which to do a specification search.
Also on the website you can access installation instructions, application notes,
Frequently Asked Questions (FAQs), selection guides and additional technical
information.

Mounting dimensions
Mounting dimensions shown in each product section are for reference only.
For exact information, request an engineering drawing from you nearest
Honeywell sales office or visit our website and access it through the interactive
catalogue. Where dual dimensions are shown on mounting drawings, the first
or upper one is millimetres (mm) and the second or lower is inches (in).
Where single dimensions are shown, they are millimetres (mm), unless
otherwise stated.

To order these products
Simply contact your local Honeywell Sales Representative, your Honeywell
Distributor or your local Honeywell office.

If you need a product not listed in this catalogue
One of Honeywell’s strengths is in application-specific packaging of sensing
technology. Honeywell provides many variations of our basic switches and
sensors. For more information, either browse the full interactive catalogue
available on our website, or telephone the following numbers:
USA
1-800-537-6945/1-815-537-6945
UK
+44 (0)1698 481 481
Germany
France +33 1 60 19 80 40
Italy

+49 69 8064 444
+39 02 92146 450/456

More information on Honeywell Sensing & Control products and how to
contact us can be found on our website.

Select the right product – select the right supplier
Delivering excellence in system critical sensing
solutions
A system is critical if the quality, reliability, delivery and customer service
associated with a component part is essential to the performance of the
operation or end product. If a sensor or a switch is critical to the
performance, cost effectiveness, delivery or safety of a product or operation
then it’s systems critical. It is therefore a defining element in the performance
of the system under whatever conditions apply. Failure of the component - or
failure of delivery of the component - results in lost productivity, increased
costs or a catastrophic event such as a shutdown. Therefore selecting the
right product is essential. It can make the difference between success and
failure.

Honeywell Sensing and Control – delivering
excellence
To select the right product, first select the right supplier. To deliver the right
products for our customers’ applications we listen to them to understand their
needs. Using techniques such as “Voice of the Customer and “Concept
Engineering” we make sure that the products and solutions we deliver are the
right ones. As part of Honeywell we can use local knowledge and
understanding combined with global expertise and resources to achieve this.
We can deploy many key technologies to bring innovative solutions to
customers’ problems.
Our products are manufactured to work well and to last. We use Six Sigma
Plus productivity to ensure this is the case. We have award winning
manufacturing facilities around the world and recognised world class
business excellence in manufacturing and supply chain management to
deliver on time, anywhere in the world.
Our e-business approach offers instant access to product information,
technical support and application knowledge through out Internet site. Check
out our powerful new interactive catalogue that can search and find the right
products for customers’ needs and deliver a drawing ready for incorporation
in a CAD system direct to your desk.
And of course, we manage our whole business for the benefit of our
customers, using an acknowledged world-class business excellence approach
that incorporates Six Sigma principles.

Expanded Product Lines
As well as many new and innovative switches, this catalogue includes an
expanded range of Pressure and Position Sensors, previously known under
the Clarostat, NEI and Electrocorporation brand names.

www.honeywell.com/sensing

3

Blank page

4

www.honeywell.com/sensing

LIMIT SWITCHES

Industrial Electromechanical
Limit Switches
Honeywell offers an advanced line of heavy duty limit switches and a wide
selection of application-proven enclosed switches (precision snap-acting
switches sealed in rugged metal housing). Sealed versions keep out moisture
and other contaminants. Our products meet or exceed critical standards
allowing for global use. Our rugged switches are suitable for use in harshduty, wash-down environments. We offer a variety of circuitry, terminations
and actuators to ensure that can match your choice of switch to your
application.
Limit and enclosed switches are the cost effective switches of choice for
detecting objects which can be touched. When an object comes in contact
with an actuator, the switch operates. Rugged and dependable, these
switches are offered in a variety of sizes, with different seals, enclosures,
actuation, circuitries and electrical ratings. Enclosed switches are known for
high precision and low cost. Limit Switches are especially rugged and well
sealed. Explosion proof switches are designed for use in hazardous locations.
The Honeywell switches featured here are all proven in a broad range of
Industrial applications - machine tools, packaging machinery, lifting gear,
presses and construction machinery.
More information about our complete product range - and the depth of
product available within each product line - can be found on our interactive
catalogue at www.honeywell.com/sensing.

MICRO SWITCH Brand products
Honeywell has been at the forefront of switching technology since we were the
first to develop the precision snap-action switch more than 60 years ago.
Ever since we introduced the MICRO SWITCH Brand Products in 1937, we
have been recognized as the performance standard that all other switches are
measured against. We continue in that tradition by constantly improving the
technology, cost-effectiveness, and delivery of these hardworking, versatile
electromechanical switches.

www.honeywell.com/sensing

5

LIMIT SWITCHES
Proper application of limit switches
The following are guidelines for the correct application of Limit Switches.
Never use the Limit Switch as a physical end stop. Mechanical damage or
incorrect operation may occur if this is done. Always ensure that the
mechanical actuator is protected from excessive mechanical shock. Never
release the actuator suddenly - gradual actuation and release will ensure that
stress on the mechanics of the switch is kept to a minimum. This has the
added benefit that the switch life will be improved. The diagrams illustrate how
to actuate your limit switch for optimum performance.

Standards and Electrical rating
IEC/EN 60947-1 explains the general rules relating to Low Voltage switchgear
and controlgear. The purpose of this standard is to harmonize as much as
possible the product performance and test requirements for equipment where
the rated voltage does not exceed 1,000 Vac or 1,500 Vdc.

WRONG

WRONG

RIGHT

FIXED STOP
RIGHT

For limit switches with pushrod actuators, the actuating force should be applied as
nearly as possible in line with the pushrod axis.

IEC 60947-5-1 is part 5 of the general rules which relates to Control-circuit
devices and switching elements, where rated voltage does not exceed 1,000
Vac or 600 Vdc. There are special requirements for control switches with
positive opening operation. These switches are marked on the outside with
this symbol:

WRONG

WRONG

over-riding
cam

RIGHT

RIGHT
over-riding

The Contact Element form defines the configuration and number of contacts
within the switch.
Form Za – both contact elements have the same polarity

cam

Cam or dog arrangements should be such that the actuator is not suddently released
to snap back freely.

Form Zb – the two contact elements are electrically separated.

free position
interference

The Utilization Category defines the type of current carried – ac or dc – and
the typical application where the switch is used.
WRONG

The contact rating Designation relates to the Utilization Categories and defines
the conventional thermal current Ith (a) rated operational current Ie (A) at
rated operational voltages Ue and the VA rating.

free position
operated
position
end of
overtravel

Actuators

RIGHT

A range of actuators is available for limit switches. Illustrations of actuator
types available from this catalogue are shown at the beginning of each
product family. Other actuators may be available - for more information
please contact your local Honeywell office.
Roller lever

end of
overtravel

WRONG

Top roller
lever

Adjustable
roller lever

Top pin
plunger

RIGHT

Operating mechanisms for limit switches shoud be so designed that, under any
operating or emergency conditions, the limit switch is not operated beyond its
overtravel limit position. A limit switch should not be used as a mechanical stop.

Top pin
plunger,
boot seal

WRONG

Top roller
plunger

Top roller
plunger,
boot seal

Top roller
Top roller
plunger,
plunger,
perpendicular perpendicular,
boot seal

non-over-riding
Ball bearing
plunger

RIGHT
over-riding
Side
pin plunger

6

Side
roller plunger

Roller lever

Yoke lever

Rod lever

Wobble head

For limit switches with lever actuators, the actuating force should be applied as
nearly perpendicular to the lever as practical and perpendicular to the shaft axis
about which the lever rotates.

www.honeywell.com/sensing

LIMIT SWITCHES
A Note on Degrees of Protection
IP Classification

NEMA Classification (USA)

The IEC 529 standard describes a system for classifying the degree of
protection provided by the enclosures of electrical equipment. The level of
protection given by the enclosure is indicated by the IP code. This code
system uses the letters ‘‘IP’’ (International Protection) followed by up to four
digits. Normally only the first two digits are used.
IP 1st Digit

2nd Digit

3rd Digit

4th Digit

The first digit is numerical and indicates the level of protection within the
enclosure against the ingress of solid foreign objects and access to hazardous
parts by persons.
The second digit is also numerical and indicates the level of protection
against the ingress of WATER into the enclosure.
The third digit is a letter and indicates a higher level of protection for persons
against access to hazardous parts.
The fourth digit is also a letter and is used in exceptional cases for
supplementary information.
If the first or second digit is not required to be specified, then it is replaced by
the letter ‘‘X’’ (‘‘XX’’ if both digits are not required). While the tables below
serve as a guide to the level of protection, Honeywell recommends that
customers refer to the full official IEC specification for the exact definitions. If
in doubt about the degree of protection required for a particular application,
please consult your local Honeywell office.
Note:
The IEC 529 standard does not relate to protection against rust, corrosion,
icing or corrosive solvents (e.g. cutting fluids) and that product coded IP 67
may not necessarily meet IP 66 requirements.
First Digit Protection against ingress of solid objects

NEMA (National Electrical Manufacturer’s Association) prepares standards
which define a product, process or procedure with reference to one or more of
the following: nomenclature, composition, construction, dimensions,
tolerances, safety, operating characteristics, performance, quality, electrical
rating, testing and the service for which designed. This standard provides
degrees of protection for Enclosures for Electrical Equipment (1000 Volts
Maximum) similar to that of the IEC 529 standard. The reference standard
herein reflects the latest data in the NEMA Standards Publication when this
information went to print. Please check for the latest information.
Non-hazardous locations
Type 1 enclosures are intended for indoor use primarily to provide a degree of
protection against contact with the enclosed equipment.
Type 3 enclosures are intended for outdoor use primarily to provide a degree
of protection against windblown dust, rain, sleet, and external ice formation.
Type 4 enclosures are intended for indoor or outdoor use primarily to provide
a degree of protection against windblown dust and rain, splashing water, and
hose-directed water.
Type 4X enclosures are intended for indoor or outdoor use primarily to
provide a degree of protection against corrosion, windblown dust and rain,
splashing water, and hose-directed water.
Type 6 enclosures are intended for indoor or outdoor use primarily to provide
a degree of protection against the entry of water during occasional temporary
submersion at a limited depth.
Type 6P enclosures are intended for indoor or outdoor use primarily to
provide a degree of protection against the entry of water during prolonged
submersion at a limited depth.
Type 12 enclosures are intended for indoor use primarily to provide a degree
of protection against dust, falling dirt, and dripping noncorrosive liquids.

IP TEST
0 no protection
1 protected against solid objects with a diameter greater than 50 mm
2 protected against solid objects with a diameter greater than 12 mm
3 protected against solid objects with a diameter greater than 2.5 mm
4 protected against solid objects with a diameter greater than 1 mm
5 protected against dust-limited ingress (no harmful deposit)
6 totally protected against dust
Second Digit Protection against ingress of water
IP TEST
0 no protection
1 protected against vertically falling drops of water
2 protected against vertically falling drops of water when the enclosure is tilted
at an angle up to 15 degrees
3 protected against water sprayed at an angle of 60 degrees from the vertical
4 protected against splashing water from all directions – limited ingress (no
harmful effects)

Type 13 enclosures are intended for indoor use primarily to provide a degree
of protection against dust, spraying water, oil and noncorrosive coolant.
Note:
Enclosures are based, in general, on the broad definitions outlined in NEMA
Standards. Therefore, it will be necessary to ascertain that a particular
enclosure will be adequate when exposed to the specific conditions that might
exist in intended applications.
Except as might otherwise be noted, all references to products relative to
NEMA enclosure type are based on Honeywell evaluation and Underwriter’s
Laboratory (UL) tested. This NEMA Standards Publication does test for
environmental conditions such as corrosion, rust, icing, oil, and coolants. The
IEC 529 does not, and does not specify degree of protection against
mechanical damage of equipment. For this reason, and because the tests and
evaluations for other characteristics are not identical, the IEC Enclosure
Classification Designations cannot be exactly equated with NEMA Enclosure
Type Numbers.

5 protected against low pressure jets of water from all directions – limited
ingress permitted
6 protected against powerful jets of water from all directions – limited ingress
permitted
7 protected against the effects of temporary immersion in water
8 protected against the effects of continuous immersion in water

www.honeywell.com/sensing

7

GLOBAL LIMIT SWITCHES

EVN2000 Series
EN 50047
Global Limit
Switches

The EVN2000 series limit switch is an innovative product which has been developed to address a need
highlighted by Original Equipment Manufacturers (OEM), where “Ease of Wiring” is required. With the
new design there is no need for access to the inside of the housing and therefore the housing cover,
cover screws and gasket become obsolete. Furthermore, the integrated cable gland eliminates the need
for additional conduit or cable gland hardware. All Normally Closed (NC) contacts are Direct Opening.
Mechanical life:
Sealing:
Operating temperature:
Approvals:

Housing material:
Termination:
Switching options:

10 million
IP 66/67, NEMA 1, 12, 13
-25 °C to 85 °C (-13 °F to 185 °F)
IEC/EN 60947-5-1
EN 60529
EN81-1
AC15 A300
DC13 Q300
UL, CE
Plastic
Insulation Displacement Terminals (IDT)
Single Pole, Double Throw,
Snap action contacts (1NC/1NO)

SPDT

Zb

Actuators

Operating characteristics
Actuator
type
Side
rotary
A

Operating
Free Pretravel
Travel to
Overtravel Differential Operating
torque/force position
positive opening
travel
point
(OF)
(FP)
(PT)
(PO)
(OT)
(DT)
(OP)
0,120 N m
(1.10 lb in)

0°

25°

45°

45°

12°

25°

Top pin
plunger
B

16,0 N
(3.60 lb)

20,0 mm 2,0 mm
(0.79 in) (0.08 in)

3,5 mm
(0.14 in)

4,0 mm
(0.16 in)

1,0 mm
(0.04 in)

18,0 mm
(0.71 in)

Top roller
plunger,
parallel

16,0 N
(3.60 lb)

30,0 mm 2,0 mm
(1.18 in) (0.08 in)

3,5 mm
(0.14 in)

4,0 mm
(0.16 in)

1,0 mm
(0.04 in)

28,0 mm
(1.10 in)

16,0 N
(3.60 lb)

30,0 mm 2,0 mm
(1.18 in) (0.08 in)

3,5 mm
(0.14 in)

4,0 mm
(0.16 in)

1,0 mm
(0.04 in)

28,0 mm
(1.10 in)

C
Top roller
plunger,
perpendicular
D

OPTIONS

Top pin plunger

Top roller plunger, parallel

Side rotary plastic roller

REFERENCE
EVN2000B

Top roller plunger, perpendicular

REFERENCE
EVN2000A
REFERENCE
EVN2000C

REFERENCE
EVN2000D

8

www.honeywell.com/sensing

GLOBAL LIMIT SWITCHES
The new economical SZL-VL Series miniature type limit switches are specially
designed for applications of small mounting space. These miniature switches
are ideal for OEM machinery which requires a rugged and reliable limit switch
that is capable of being mounted in space restricted applications. A wide range
of actuators and optional neon lamp indicators add additional flexibility. A
special pre-molded flexible cable gland allows for fast and simple wiring
termination.

VL Series
General Purpose Compact
Limit Switches

Mechanical life:
Sealing:
Operating temperature:
Approvals:
Termination:
Contacts:
Electrical ratings:
Ampere rating:
Switching options:
SPDT

up to 10 million operations
IP 64
-20 °C to 60 °C (-4 °F to 140 °F)
UL, C-UL, CE
Cable gland
Gold plated silver
250 Vac 125 Vdc max.
5 A @ 250 Vac max./0.4 A @ 125 Vdc max.
Single Pole, Double Throw, Double break
(1NC/1NO)
VL

3

4

NO

NO
1

2
NC

NC

Actuators

Side rotary actuated switches
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):

20°
75°
10°

OPTIONS
Roller lever, adjustable

Roller lever
41.2±.08
18 dia.x7
nylon roller
20
PT

˚max

R3
0

M4 arm fixing nut

(Roller can be
rotated and locked
in any position
through 360˚)

+0.2
2-4.1
dia.
-0
mounting holes
+0.008
.161
dia.
-0
mounting holes
cover screw
M3x6

36.2±0.8

Adjustable length
of arm
(30-70)
0˚max
PT 2

1.425±.031
10.2
.402

M4 arm
fixing screw
(with hexagonal
holes)
12.5
.492

56±0.3
2.205±.012

47.7±0.8
1.878±.031

1.622±.031

2-M5 (P=0.8)
18.5 tapped
.728
7 .276 in depth
mounting holes
20.4±0.3
.803±.012

14
.551

15.1
.594

28
1.102

38.1
1.5

Operating torque max.:

+0.2
2-4.1 0 dia.
mounting holes

7.5±0.2
.295±.008
25
.984
(Standard type)

5,88 N (1.32 lb)

10.2
.402

Arm fastening plate
12.5
.492

18.5
.728

Mounting metal

M6 arm fastening
plate screw with
hexagonal holes
56±0.3
2.205±.012

64
2.520

2-M3x23
cover screw

21±0.2
.827±.008

(Roller can be rotated
and locked in any
position through 360˚)
M4 arm fastening
plate screw with
hexagonal holes

+0.008
.161 -0 dia.
mounting holes
2-M5 (P=0.8)
tapped
mounting holes

42.7±0.8
1.681±.031
33.5±0.8
1.319±.031
28.5±0.8
1.122±.031

18 dia.x7 nylon rooler

M3x6
cover screw

2-M5 (P=0.8) tapped
7 .276 in depth
mounting holes
64
2.520
2.0
.079

2-M3x23
cover screw

2-M5 (P=0.8) tapped
mounting holes
14
.551

21±0.2
.827±.008
28
1.102

Operating torque max.:

REFERENCE
SZL-VL-A

7.5±0.2
15.1 .295±.008
.594 20.4±0.3
25
.803±.012
.984
(Standard type)
(46.4) (1.827)

3,35 N to 7,84 N (0.75 lb to 1.76 lb)
REFERENCE
SZL-VL-B

www.honeywell.com/sensing

9

GLOBAL LIMIT SWITCHES

VL Series
Side rotary actuated switches (continued)

Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
Operating force max. (OF):

Adjustable rod
5.5
.217
0
PT 2

˚ max

2.6 .102 dia. rod
and locked in any
(Roller can be rotated
position through 360˚)

44.9
1.768
36.3±0.8
1.429±.031

18.5
.728

12.5 Rod mounting metal
.492
M6 mounting rod
fastening screw with
hexagonal holes

M3x6
cover screw

Top pin plunger
7. 276 dia.
stainless steel plunger

Rod fastening plate

+0.008
.161 -0 dia.
mounting holes

2-M5 (P=0.8) tapped
7 .276 in depth
mounting holes
64
2.520

56±0.3
2.205±.012

2-M5 (P=0.8) tapped
mounting holes
2-M3x23
cover screw
15.1
.594
25
.984
(44.9) (1.768)

Operating torque max.:

10.2
.402

3
.118

PT 1.5 max
+0.2 dia.
2-4.1
0
mounting holes

4
.157

26.5
1.043

+0.008
.161
-0
dia.
mounting holes
M3x6
cover screw

2-M5 (P=0.8) tapped
7 .276 in depth
mounting holes

20.4±0.3
.803±.012
56±0.3
2.205±.012

14
.551
21±0.2
.827±.008
28
1.102

1,5 mm (0.060 in)
4,0 mm (0.158 in)
0,7 mm (0.028 in)
8,83 N (2 lb)

10.2
.402

M4 rod fastening plate
screw with hexagonal holes

Adjustable lenght of rod
(30-118)
+0.2
2-4.1 0 dia.
mounting holes

Plunger actuated switches

64
2.520

7.5±0.2
.295±.008
20.4±0.3
.803±.012
(Standard type)

2-M5 (P=0.8) tapped
mounting holes
2-M3x23
cover screw

14
.551
21±0.2
.827±.008
28
1.102

2 N to 7,84 N
(0.45 lb to 1.76 lb)

7.5±0.2
15.1 .295±.008
.594
25
.984

(Standard type)

REFERENCE
SZL-VL-C
REFERENCE
SZL-VL-D

Top roller plunger
12.5 dia.x3.8
stainless steel roller

10.2
.402

PT 1.5 max
14.8
.583
+0.2
2-4.1 0 dia.
mounting holes

38
1.496

4
.157

+0.008
.161 -0 dia.
mounting holes
M3x6
cover screw

20.4±0.3
.803±.012
56±0.3
2.205±.012

2-M5 (P=0.8) tapped
7 .276 in depth
mounting holes
64
2.520
2-M5 (P=0.8) tapped
mounting holes

2-M3x23
cover screw

14
.551
21±0.2
.827±.008
28
1.102

15.1
.594
25
.984

REFERENCE
SZL-VL-H

10

www.honeywell.com/sensing

7.5±0.2
.295±.008
(Standard type)

GLOBAL LIMIT SWITCHES

Plunger actuated switches (continued)

Wobble actuated switches

Cross roller plunger

Pretravel max. (PT):
Overtravel min. (OT):
Operating force max. (OF):

12.5 dia.x3.8
stainless steel roller

10.2
.402

30 mm (1.18 in)
20 mm (0.788 in)
0,88 N (0.2 lb)

Plastic rod, coil spring

PT 1.5 max
14.8
.583
+0.2
2-4.1 0 dia.
mounting holes
+0.008
.161 -0 dia.
mounting holes

38
1.496

M3x6
cover screw

4
.157

3 dia.
.118
Nylon rod

5.8 dia.
.228

64
2.520
2-M5 (P=0.8) tapped
mounting holes

2-M3x23
cover screw

14
.551
21±0.2
.827±.008
28
1.102

15.1
.594
25
.984

REFERENCE
SZL-VL-E

7.5±0.2
.295±.008

10.2
.402

41.5
1.634

2-M5 (P=0.8) tapped
7 .276 in depth
mounting holes

20.4±0.3
.803±.012
56±0.3
2.205±.012

PT 50 max

100±1.5
3.937±.059
+0.2
2-4.1 0 dia.
mounting holes
+0.008
.161 -0 dia.
mounting holes

4
.157

(Standard type)

M3x6
cover screw

56±0.3
2.205±.012

2-M5 (P=0.8) tapped

20.4±0.3
.803±.012

7 .276 in depth
mounting holes

64
2.520

2-M5 (P=0.8) tapped
mounting holes

2-M3x23
cover screw
21±0.2
.827±.008
28
1.102

15.1
.594
25
.984

14
.551
7.5±0.2
.295±.008
(Standard type)

REFERENCE
SZL-VL-F

Coil spring

SZL-VL-G

10.2
.402

PT 30 max
1.2 dia.
.047 stainless
steel wire
51.5
2.028

100±1.5
3.937±.059

+0.2
2-4.1 0 dia.
mounting holes

4
.157

+0.008
.161
-0 dia.
mounting holes
M3x6
cover screw

56±0.3
2.205±.012

20.4±0.3
.803±.012

2-M5 (P=0.8) tapped
7 .276 in depth
mounting holes
64
2.520
2-M5 (P=0.8) tapped
mounting holes

2-M3x23
cover screw

14
.551
21±0.2
.827±.008
28
1.102

15.1
.594
25
.984

7.5±0.2
.295±.008
(Standard type)

REFERENCE
SZL-VL-G

www.honeywell.com/sensing

11

GLOBAL LIMIT SWITCHES
GLS Series switches offer a complete range of CENELEC approved products,
and are suitable for most industrial applications.

GLS Series
Global Limit
Switches

The standard product EN 50041 norm defines the switch mounting centres as
30 mm x 60 mm and also defines the switching characteristics of the side
rotary head with fixed lever, top pin plunger and top roller plunger. This means
that the switch can be interchanged in the application with other EN 50041
switches with mounting and switching characteristics maintained. Honeywell
offers many more head styles and switching options.
The miniature EN 50047 product range offers the user a choice of plastic,
metal and three conduit versions which are all mounting (20 mm x 22 mm)
compatible with each other. The EN 50047 standard defines how the switches
are mounted and the switching characteristics for fixed side rotary lever, top
pin plunger and top roller plunger.
Switching options:

Electrical ratings

SPDT

Single Pole, Double Throw, Snap action contacts (1NC/1NO)

IEC947-5-1/EN60947-5-1
Designation &

Rated operational current Ie (A)

Utilization Category

at rated operational voltage Ue
120V

240V

380V 480V 500V

14

13

VA
rating

600V

22
21

Make Break

AC15

A600

6

3

1.9

1.5

1.4

1.2

7200

720

AC15

A300

6

3

-

-

-

-

7200

720

AC15

B300

3

1.5

-

-

-

-

3600

360

AC14

D300

0.6

0.3

-

-

-

-

432

72

125V

250V

DC13

Q300

0.55

0.27

69

69

DC13

R300

0.22

0.1

28

28

DPDT

Double Pole, Double Throw Snap action contacts (2NC/2NO)
13
11
23
21

14
12
24
22

Actuators
Operating characteristics
Actuator
type

Body
size

Operating torque/force
(OF)
SPDT

Lever types
A,
A*A, A*B,
A4J

Top pin
plunger
B

Top roller
plunger
C

Top roller
lever
D

Wobble head
E7B, E7D,
K8B, K8C

12

EN50041
(GLA)

DPDT

Free position
(FP)
SPDT

DPDT

EN50041
(GLA)
EN50047
(GLC, GLD,
GLE)
EN50041
(GLA)
EN50047
(GLC, GLD,
GLE)
EN50041
(GLA)
EN50047
(GLC, GLD,
GLE)
EN50041
(GLA)

SPDT

DPDT

Travel to
positive opening
(PO)
SPDT

DPDT

0,330 N m
(2.90 lb in)
0,120 N m
(1.10 lb in)

16,0 N
(3.60 lb)

13,0 N
(2.90 lb)
GLE only

16,0 N
3.60 lb
16,0 N
(3.60 lb)

13,0 N
(2.90 lb)
GLE only

9,5 N
(2.10 lb)
11,0 N
(2.4 lb)

26˚

9,0 N
(1.9 lb)
GLE only

SPDT

DPDT

Differential travel
(DT)

Operating point
(OP)

SPDT

SPDT

DPDT

DPDT

12˚

55˚

0,165 N m
(1.50 lb in)
GLE only

16,0 N
(3.60 lb)

Overtravel
(OT)

59˚
0˚

EN50047
(GLC, GLD,
GLE)

Pretravel
(PT)

26˚
49˚

11.5˚

8˚

37,5 mm
(1.48 in)

2,5 mm
(0.10 in)

4,5 mm
(0.18 in)

4,5 mm
(0.18 in)

0,9 mm
(0.035 in)

35,0 mm
(1.38 in)

21,0 mm
(0.83 in)

3,0 mm
(0.12 in)

5,0 mm
(0.20 in)

3,0 mm
(0.12 in)

0,9 mm
0,6 mm
(0.035 in) (0.024 in)

18,0 mm
(0.71 in)

50,5 mm
(2.00 in)

2,5 mm
(0.10 in)

4,5 mm
(0.18 in)

4,5 mm
(0.18 in)

0,9 mm
(0.035 in)

48,0 mm
(1.89 in)

31,0 mm
(1.22 in)

3,0 mm
(0.12 in)

5,0 mm
(0.20 in)

3,0 mm
(0.12 in)

0,9 mm
0,6 mm
(0.035 in) (0.024 in)

28,0 mm
(1.10 in)

65,2 mm
(2.57 in)

4,2 mm
(0.165 in)

8,3 mm
(0.33 in)

9,0 mm
(0.35 in)

1,7 mm
(0.067 in

61,0 mm
(2.40 in)

39,25 mm
(1.55 in)

3,45 mm
(0.14 in)

5,2 mm
(0.205 in)

1,3 mm
(0.19 in)

35,8 mm
(1.41 in)

8˚

__

0,1 N
(0.90 in lb)

6,9 mm
(0.27 in)

18˚

__

__

16˚

__

__

0˚
EN50047
(GLC, GLD,
GLE)

1,3 N
(0.29 lb)

1,1 N
(0.25 lb)
GLE only

www.honeywell.com/sensing

10˚

7˚

__

GLOBAL LIMIT SWITCHES

GLA EN 50041
Standard metal body
Top pin plunger

Side rotary adjustable roller

FP

Mechanical life:
up to 15 million
Sealing:
IP 67, NEMA 1, 4, 12, 13
Operating temperature:
-25 °C to 85 °C
(-13 °F to 185 °F)
Approvals:
IEC/EN 60947-5-1
AC15 A300/A600
DC13 Q300
UL, CSA, CE
Switching options:
SPDT
Single Pole, Double Throw
Snap action contacts (1NC/1NO)
DPDT
Double Pole, Double Throw
Snap action contacts (2NC/2NO)

HEAD OPTIONS

Plastic roller
CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT

CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm

REFERENCE
GLAA01A2A
GLAA20A2A
GLAB01A2A
GLAB20A2A
GLAC01A2A

CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm
20 mm

REFERENCE
GLAA01A2B
GLAA20A2B
GLAB01A2B
GLAB20A2B
GLAC01A2B
GLAC20A2B

37,5
(1.48)

CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT

CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm
20 mm

REFERENCE
GLAA01B
GLAA20B
GLAB01B
GLAB20B
GLAC01B
GLAC20B

Top roller plunger

Metal roller
CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT

Side rotary
Side rotary adjustable metal rod

FP

CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT

CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm
20 mm

REFERENCE
GLAA01C
GLAA20C
GLAB01C
GLAB20C
GLAC01C
GLAC20C

41
(1.61)

34
(1.34)

4,5
(.17)
75˚

No lever

Top roller lever

¯ 3,2
(.13)

13,0
(.51)

32 - 134
75˚ (1.26 - 5,28)

Levers: Levers for side rotary types are ordered
separately (see pages 69-71 for details)
CONTACT
SPDT
DPDT
SPDT

CONDUIT
½ in NPT
½ in NPT
PG 13,5

REFERENCE
GLAA01A
GLAA20A
GLAB01A

Plastic roller
CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT

CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm
20 mm

REFERENCE
GLAA01A1A
GLAA20A1A
GLAB01A1A
GLAB20A1A
GLAC01A1A
GLAC20A1A

CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm
20 mm

REFERENCE
GLAA01A1B
GLAA20A1B
GLAB01A1B
GLAB20A1B
GLAC01A1B
GLAC20A1B

65,2

FP(2.51)
35
(1.38)

15
(.6)

CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT

CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm

REFERENCE
GLAA01A4J
GLAA20A4J
GLAB01A4J
GLAB20A4J
GLAC01A4J

CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT

CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm
20 mm

Ø 18,7
(.74)

REFERENCE
GLAA01D
GLAA20D
GLAB01D
GLAB20D
GLAC01D
GLAC20D

Metal roller
CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT

www.honeywell.com/sensing

13

GLOBAL LIMIT SWITCHES

GLC EN 50047
Standard metal body

GLA EN 50041
Standard metal body
(continued)
Wobble, coil actuator

Wobble, cat whisker

22
(.87)
20
(.78)

24,75
(0.97)
3
(.12)

R 2,15
(.08)

CONTACT
SPDT
SPDT
DPDT
SPDT
DPDT

CONDUIT
½ in NPT
PG 13,5
PG 13,5
20 mm
20 mm

30,5
(1.20)

30
(1.18)

REFERENCE
GLAA01E7B
GLAB01E7B
GLAB20E7B
GLAC01E7B
GLAC20E7B

55
(2.16)

3,5
(0.138)

14,5
(.57)
15,25
(.600)

Coil wobble head, stainless steel
spring actuator

conduit thread
PG 13,5

CONTACT
SPDT
SPDT

CONDUIT
½ in NPT
PG 13,5

REFERENCE
GLAA01K8B
GLAB01K8B

Wobble, cat whisker, coil actuator

Mechanical life:
up to 10 million
Sealing:
IP 66, NEMA 1, 4, 12, 13
Operating temperature:
-25 °C to 85 °C
-13 °F to 185 °F
Approvals:
IEC/EN 60947-5-1
AC15 A300
DC13 Q300
UL, CSA, CE
Switching options:
SPDT
Single Pole, Double Throw
Snap action contacts (1NC/1NO)

HEAD OPTIONS
Side rotary
°

CONTACT
SPDT

CONDUIT
½ in NPT

REFERENCE
GLAA01E7D

CONTACT
SPDT
DPDT
SPDT

CONDUIT
½ in NPT
½ in NPT
PG 13,5

REFERENCE
GLAA01K8C
GLAA20K8C
GLAB01K8C

Plastic roller
CONTACT
SPDT
SPDT

CONDUIT
½ in NPT
PG 13,5

REFERENCE
GLCA01A1A
GLCB01A1A

CONDUIT
½ in NPT
PG 13,5
20 mm

REFERENCE
GLCA01A1B
GLCB01A1B
GLCC01A1B

Metal roller
CONTACT
SPDT
SPDT
SPDT

14

www.honeywell.com/sensing

GLOBAL LIMIT SWITCHES

GLC EN 50047
Standard metal body
(continued)
Side rotary adjustable

Wobble, coil actuator

Top pin plunger
Ø 9.9
(.390)

DT
OP

18±0,5
(.709)

CONTACT
SPDT
SPDT
SPDT

CONDUIT
½ in NPT
PG 13,5
20 mm

➞

REFERENCE
GLCA01B
GLCB01B
GLCC01B

Plastic roller
CONTACT
SPDT
SPDT

CONDUIT
½ in NPT
PG 13,5

REFERENCE
GLCA01A2A
GLCB01A2A

Top roller plunger
Mechanical life:

Metal roller
CONTACT
SPDT
SPDT
SPDT

31,0 FP
1.22
CONDUIT
½ in NPT
PG 13,5
20 mm

CONTACT
SPDT
SPDT
SPDT

REFERENCE
GLCA01A2B
GLCB01A2B
GLCC01A2B

Side rotary adjustable, metal rod

CONTACT
SPDT
SPDT
SPDT

CONDUIT
½ in NPT
PG 13,5
20 mm

REFERENCE
GLCA01C
GLCB01C
GLCC01C

CONDUIT
½ in NPT
PG 13,5
20 mm

REFERENCE
GLCA01D
GLCB01D
GLCC01D

up to 5 million
CONDUIT
½ in NPT
PG 13.5
20 mm

REFERENCE
GLCA01E7B
GLCB01E7B
GLCC01E7B

Wobble, cat whisker

41
(1.61)

Top roller lever

34
(1.34)

4,5
(.17)
75˚

¯ 3,2
(.13)

Ø

FP 39,2

(1.54)

32 - 134
75˚ (1.26 - 5,28)

15
(.6)

CONTACT
SPDT
SPDT

CONDUIT
½ in NPT
PG 13,5

CONTACT
SPDT
SPDT
SPDT

REFERENCE
GLCA01A4J
GLCB01A4J

Mechanical life:
CONTACT
SPDT
SPDT

www.honeywell.com/sensing

5 million
CONDUIT
½ in NPT
PG 13,5

REFERENCE
GLCA01K8A
GLCB01K8A

15

GLOBAL LIMIT SWITCHES

GLD EN 50047
Double insulated
standard body

GLE EN 50047 Compatible
3 conduit
metal standard body
Side rotary adjustable
Plastic roller/metal lever

22
(.87)
20
(.78)

24,75
(0.97)
3
(.12)

CONTACT
SPDT
SPDT

R 2,15
(.08)

55
(2.16)

30,5
(1.20)

REFERENCE
GLDA01A2A
GLDB01A2A

Metal roller/metal lever
CONTACT
SPDT
SPDT
SPDT

30
(1.18)

CONDUIT
½ in NPT
PG 13.5

CONDUIT
½ in NPT
PG 13,5
20 mm

REFERENCE
GLDA01A2B
GLDB01A2B
GLDC01A2B

3,5
(0.138)

14,5
(.57)

Side rotary adjustable metal rod
15,25
(.600)

CONTACT
SPDT
SPDT

conduit thread
PG 13,5

CONDUIT
½ in NPT
PG 13,5

REFERENCE
GLDA01A4J
GLDB01A4J

CONDUIT
½ in NPT
PG 13,5
20 mm

REFERENCE
GLDA01B
GLDB01B
GLDC01B

Top pin plunger

Mechanical life:
Sealing:
Operating temperature:
Approvals:

See GLC section
IP 66, NEMA 1, 2, 13
-25 °C to 85 °C
-13 °F to 185 °F
IEC/EN 60947-5-1
AC15 A600
DC13 Q300
UL, CSA, CE

Switching options:
SPDT
Single Pole, Double Throw
Snap action contacts (1NC/1NO)

CONTACT
SPDT
SPDT
SPDT

Mechanical life:
up to 10 million
Sealing:
IP 66, NEMA 1, 4, 12, 13
Operating temperature:
-25 °C to 85 °C
-13 °F to 185 °F
Approvals:
IEC/EN 60947-5-1
AC15 A300
DC13 Q300
UL, CSA, CE
Switching options:
SPDT
Single Pole, Double Throw
Snap action contacts (1NC/1NO)
DPDT
Double Pole, Double Throw
Snap action contacts (2NC/2NO)

HEAD OPTIONS

Top roller plunger

Side rotary
CONTACT
SPDT
SPDT
SPDT

CONDUIT
½ in NPT
PG 13,5
20 mm

REFERENCE
GLDA01C
GLDB01C
GLDC01C

CONDUIT
½ in NPT
PG 13,5
20 mm

REFERENCE
GLDA01D
GLDB01D
GLDC01D

HEAD OPTIONS
See GLC section for dimension
illustrations
Side rotary
Plastic roller/lever
CONTACT
SPDT
SPDT

CONDUIT
½ in NPT
PG 13,5

REFERENCE
GLDA01A1A
GLDB01A1A

Metal roller/lever
CONTACT
SPDT
SPDT
SPDT

CONDUIT
½ in NPT
PG 13,5
20 mm

REFERENCE
GLDA01A1B
GLDB01A1B
GLDC01A1B

Top roller lever
CONTACT
SPDT
SPDT
SPDT

Plastic roller

Wobble, coil actuator
CONTACT
SPDT
SPDT
SPDT

CONDUIT
½ in NPT
PG 13,5
20 mm

REFERENCE
GLDA01E7B
GLDB01E7B
GLDC01E7B

CONTACT
SPDT
SPDT
DPDT

REFERENCE
GLEA01A1A
GLEB01A1A
GLEB24A1A

CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm

REFERENCE
GLEA01A1B
GLEA24A1B
GLEB01A1B
GLEB24A1B
GLEC01A1B

Metal roller
CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT

16

CONDUIT
½ in NPT
PG 13,5
PG 13,5

www.honeywell.com/sensing

GLOBAL LIMIT SWITCHES

GLE EN 50047 Compatible
3 conduit
metal standard body
(continued)
Side rotary adjustable metal rod

Offset side rotary roller

Top roller lever

41
(1.61)
FP 39,2

(1.54)

4,5
(.17)

34
(1.34)

75˚

¯ 3,2
(.13)
32 - 134
75˚ (1.26 - 5,28)

Plastic roller
CONTACT
SPDT
SPDT

CONDUIT
½ in NPT
PG 13,5

15
(.6)

REFERENCE
GLEA01A5A
GLEB01A5A
CONTACT
SPDT
DPDT

CONDUIT
PG 13,5
PG 13,5

REFERENCE
GLEB01A4J
GLEB24A4J

Side rotary adjustable

CONTACT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT

CONDUIT
½ in NPT
½ in NPT
PG 13,5
13,5
20 mm
20 mm

REFERENCE
GLEA01D
GLEA24D
GLEB01D
GLEB24D
GLEC01D
GLEC24D

Wobble, coil actuator

Top pin plunger
16˚ ±5˚
(2.37)

OP
DT
10˚

Þ

OT
35˚ (max)
100
(3.92)

18
(0.709)

Plastic roller
CONTACT
SPDT
DPDT
SPDT

CONDUIT
½ in NPT
½ in NPT
PG 13,5

REFERENCE
GLEA01A2A
GLEA24A2A
GLEB01A2A

CONTACT
SPDT
DPDT
SPDT
DPDT

CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5

REFERENCE
GLEA01B
GLEA24B
GLEB01B
GLEB24B

Mechanical life:

Metal roller
CONTACT
SPDT
SPDT
DPDT

CONDUIT
½ in NPT
PG 13,5
PG 13,5

REFERENCE
GLEA01A2B
GLEB01A2B
GLEB24A2B

CONTACT
SPDT
DPDT
SPDT
DPDT

Top roller plunger
Ø 12,4
(0.49)

31,0
FP
1.23

CONTACT
SPDT
DPDT
SPDT
DPDT
DPDT

CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm

up to 5 million
CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5

REFERENCE
GLEA01E7B
GLEA24E7B
GLEB01E7B
GLEB24E7B

REFERENCE
GLEA01C
GLEA24C
GLEB01C
GLEB24C
GLEC24C

www.honeywell.com/sensing

17

COMPACT LIMIT SWITCHES

SL1 Series
Compact Limit
Switches

The SL1 Series compact limit switches are sealed, sensitive and have a long life. The compact size makes them suitable
for the total miniaturization of machinery or equipment.
Mechanical life:
Sealing:
Operating temperature:
Approvals:
Termination:
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
Electrical rating/contact:

SL1-*
SL1-* K

10 million
IP 67, NEMA 3, 4, 13
-10 °C to 70 °C (14 °F to 160 °F)
UL, CSA, CE
Cable gland
11,76 N (2.64 lb)
1,5 mm (0.060 in)
3,0 mm (0.118 in)
0,10 mm (0.004 in)
5A - 125, 250 Vac
Silver
0.1 A - 125 Vac; 0.1 A - 30 Vdc
Gold clad cross point

Switching options:
SPDT

Single Pole, Double Throw,
Snap action contacts (1NC/1NO)

Actuators

OPTIONS
Top pin plunger

Top roller plunger, parallel, boot seal
11 D X 4W ROLLER
PT

25,4
(OP)

CONTACT
Silver
Gold clad cross point

REFERENCE
SL1-H
SL1-HK

Top roller plunger, parallel

18

REFERENCE
SL1-B
SL1-BK

Top roller plunger, long, parallel

41,4
(OP)

31,4
(OP)

CONTACT
Silver
Gold clad cross point

CONTACT
Silver
Gold clad cross point

REFERENCE
SL1-A
SL1-AK

CONTACT
Silver
Gold clad cross point

www.honeywell.com/sensing

REFERENCE
SL1-E
SL1-EK

COMPACT LIMIT SWITCHES
Top roller plunger, perpendicular

Top roller lever

31,4
(OP)

CONTACT
Silver
Gold clad cross point

REFERENCE
SL1-D
SL1-DK

Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
CONTACT
Silver
Gold clad cross point

3,92 N (0.88 lb)
2,0 mm (0.079 in)
4,0 mm (0.158 in)
0,3 mm (0.012 in)
REFERENCE
SL1-P
SL1-PK

Top roller plunger, long, perpendicular

41,4
(OP)

CONTACT
Silver
Gold clad cross point

REFERENCE
SL1-K
SL1-KK

www.honeywell.com/sensing

19

COMPACT LIMIT SWITCHES

14CE/914CE Series
Miniature Enclosed
Switches

The 14CE/914CE Series offers a miniature, rugged, compact, pre-wired switch which has proved itself
successful and gained wide market acceptance. The entire range of 14CE and 914CE switches has been
approved to meet the requirements of the Low Voltage directive and is therefore CE marked.
CE switches have different degrees of protection from IP66 to IP68 for the fully booted head styles. The
cable entry is fully potted using a special compound to ensure that ingress is virtually impossible.
Mechanical life:
Sealing:
Operating temperature:
Approvals:

Operating force (OF):
Pretravel (PT):
Overtravel (OT):
Differential travel (DT):
Contact/Rating:

Connection:

Actuators

Switching options:

10 million
IP66, IP67, IP68
NEMA 1, 2, 3, 3R, 4, 6, 6P, 12 (boot seal), 13
14CE
0 °C to 70 °C (32 °F to 158 °F)
914CE
0 °C to 105 °C (32 °F to 221 °F)
14CE
CE
914CE
CSA, UL, CE
AC14 D300
DC13 R300
11,8 N (2,65 lb) max.
1,8 mm (0.71 in) max.
3,0 mm (0.118 in) min.
0,1mm (0.004 in) max.
(9)14CE* -*
Silver
A
(9)14CE* -*G
Gold
B
(9)14CE* -Q, -AQ, -AQ1
Silver
C
Harmonised CENELEC 4 x 0,75 mm2 cable (14CE)
SJTO 4 x 0,75 mm2 (18 AWG) cable (914CE)
Connector (dc), 4 pin male, M12 thread (-Q)
Connector (ac), 4 pin male, ½ in x 20 thread (-Q1)
SPDT
Single Pole, Double Throw
Snap action contacts (1NC/1NO)
S.P.D.T
BROWN
2

14CE

914CE

GREEN/YELLOW
BLUE
1

3
BLACK

Electrical ratings:
A

UL/CSA:
B
UL:
C

UL/CSA:

Amps
Make
1.2
5
3
3

240 Vac, ind.
240 Vac, res.
28 Vdc, res.
28 Vdc, ind.
5 A, 1/10 Hp, 125 or 250 Vac
1 A res., 0.5 A ind., 30 Vdc
1 A, 125 Vac
3 A, 125 or 250 Vac

Operating
point (OP)

1,8 max PT

Free position
(FP)

Ø
14CE 7,4 (0.29)
914CE 8,65 (0.34)

20

Break
0.2
5
3
3

www.honeywell.com/sensing

3 min OT

,

,
,

Side exit cable
(Option 'A')

COMPACT LIMIT SWITCHES

Plunger actuated switches
OPTIONS
Top pin plunger
Ø 10,0
(0.39)

Ball bearing plunger

Top roller plunger, parallel
Ø 12,4
(0.49)

OP
15,7
(0.62)

OP
28,4
(1.12)

OP
24,4
(0.96)
NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
3 ft cable, side exit
3 ft cable, bottom exit, gold contacts
6 ft cable, bottom exit
6 ft cable, bottom exit, gold contacts
9 ft cable, bottom exit
Connector (dc), bottom exit
Connector (ac), bottom exit

REFERENCE
914CE1-3
914CE1-3A
914CE1-3G
914CE1-6
914CE1-6G
914CE1-9
914CE1-Q
914CE1-Q1

EUROPE
1 metre cable, bottom exit
1 metre cable, side exit
1 metre cable, bottom exit, gold contacts
2 metre cable, bottom exit
3 metre cable, bottom exit
3 metre cable, side exit
3 metre cable, bottom exit, gold contacts
Connector (dc), side exit
Connector (dc), bottom exit

REFERENCE
14CE1-1
14CE1-1A
14CE1-1G
14CE1-2
14CE1-3
14CE1-3A
14CE1-3G
14CE1-AQ
14CE1-Q

NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
6 ft cable, bottom exit

REFERENCE
914CE66-3
914CE66-6

EUROPE/
1 metre cable, bottom exit
2 metre cable, bottom exit

REFERENCE
14CE66-1
14CE66-2

Adjustable plunger

Top pin plunger, boot seal
Ø 7,0
(0.28)

OP

NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
3 ft cable, side exit
3 ft cable, bottom exit, gold contacts
6 ft cable, bottom exit
6 ft cable, side exit
9 ft cable, bottom exit
Connector (dc), side exit
Connector (dc), bottom exit
Connector (ac), bottom exit

REFERENCE
914CE2-3
914CE2-3A
914CE2-3G
914CE2-6
914CE2-6A
914CE2-9
914CE2-AQ
914CE2-Q
914CE2-Q1

EUROPE
1 metre cable, bottom exit
1 metre cable, side exit
1 metre cable, bottom exit, gold contacts
2 metre cable, bottom exit
2 metre cable, side exit
3 metre cable, bottom exit
3 metre cable, side exit
3 metre cable, bottom exit, gold contacts
Connector (dc), side exit
Connector (dc), bottom exit

REFERENCE
14CE2-1
14CE2-1A
14CE2-1G
14CE2-2
14CE2-2A
14CE2-3
14CE2-3A
14CE2-3G
14CE2-AQ
14CE2-Q

Top roller plunger, parallel, boot
seal

OP
24,6
(0.98)

Ø 12,4
(0.49)
OP
34,4
(1.35)

NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
3 ft cable, side exit
6 ft cable, bottom exit
9 ft cable, bottom exit
9 ft cable, side exit
Connector (ac), side exit
Connector (dc), bottom exit
Connector (ac), bottom exit

REFERENCE
914CE18-3
914CE18-3A
914CE18-6
914CE18-9
914CE18-9A
914CE18-AQ1
914CE18-Q
914CE18-Q1

EUROPE
1 metre cable, bottom exit
3 metre cable, bottom exit
Connector (dc), bottom exit

REFERENCE
14CE18-1
14CE18-3
14CE18-Q

NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
9 ft cable, bottom exit

REFERENCE
914CE19-3
914CE19-9

Manually operated
Operating force (OF):

OP
27,4
(1.08)

M10x1 Thread

NORTH AMERICA/GLOBAL
Connector (dc), bottom exit

REFERENCE
914CE31-3
914CE31-6

EUROPE
1 metre cable, bottom exit
3 metre cable, bottom exit

REFERENCE
14CE31-1
14CE31-3

Top roller plunger, parallel, panel
mounted

Top pin plunger, panel mounted
OP
29,2
(1.15)

17,5 N (3.82 lb)

NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
6 ft cable, bottom exit

Operating force (OF):
NORTH AMERICA/GLOBAL
6 ft cable, bottom exit

9,0 N (2.02 lb)
REFERENCE
914CE22-6

OP
42,5
(1.67)

REFERENCE
914CE27-Q
NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
6 ft cable, bottom exit
Connector (dc), bottom exit

www.honeywell.com/sensing

REFERENCE
914CE28-3
914CE28-6
914CE28-Q

21

COMPACT LIMIT SWITCHES

14CE/914CE Series
Plunger actuated switches
(continued)

Side rotary and wobble
actuated switches

Top roller plunger, perpendicular

OPTIONS

5,1
(0.20)

Rotary motion

Ø 12,4
(0.49)
OP
28,5
(1.12)

NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
6 ft cable, bottom exit
6 ft cable, side exit
9 ft cable, bottom exit
Connector (dc), bottom exit
Connector (ac), bottom exit

REFERENCE
914CE3-3
914CE3-6
914CE3-6A
914CE3-9
914CE3-Q
914CE3-Q1

EUROPE
1 metre cable, bottom exit
2 metre cable, bottom exit
3 metre cable, bottom exit

REFERENCE
14CE3-1
14CE3-2
14CE3-3

Top roller plunger, perpendicular,
boot seal

OP
34,4
(1.35)

(actuating lever not included - use any
LSZ51*, LSZ52*, LSZ54*, LSZ55* or LSZ61*
Series shown on page ??

Operating torque:
Pretravel (PT):
Overtravel (OT) mm:
Differential travel:

0,3 Nm (2.66 in lb)
30° max.
40° min.
3°

NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
3 ft cable, side exit
6 ft cable, bottom exit
9 ft cable, bottom exit
Connector (dc), bottom exit

REFERENCE
914CE16-3
914CE16-3A
914CE16-6
914CE16-9
914CE16-Q

EUROPE
1 metre cable, bottom exit
2 metre cable, bottom exit
3 metre cable, bottom exit

REFERENCE
14CE16-1
14CE16-2
14CE16-3

Wobble Spring wire

Operating force (OF):
NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
3 ft cable, side exit

17,5 N (3.82 lb)
REFERENCE
914CE55-3
914CE55-3A

Top roller plunger, perpendicular,
panel mounted

OP
42,5
(1.67)

Operating Force (OF):

NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
6 ft cable, bottom exit

22

REFERENCE
914CE29-3
914CE29-6

0,55 N (0.12 lb)

NORTH AMERICA/GLOBAL
3 ft cable, bottom exit
6 ft cable, bottom exit
9 ft cable, bottom exit
Connector (dc), bottom exit

REFERENCE
914CE20-3
914CE20-6
914CE20-9
914CE20-Q

EUROPE
1 metre cable, bottom exit
3 metre cable, bottom exit

REFERENCE
14CE20-1
14CE20-3

www.honeywell.com/sensing

COMPACT LIMIT SWITCHES

24CE/924CE Series
Miniature Safety
Electromechanical
Switches

Actuators

For position sensing and switching applications requiring direct acting, positive opening contacts the
24CE and 924CE ranges are ideal. They have been tested and approved to meet the requirements of the Low
Voltage directive and positive opening safety contacts per IEC/EN 60947-5-1-3. The devices are CE marked.
The red colour clearly differentiates this safety component in the application. The 924CE range also has UL
and CSA approval.
It is possible for the end user to enhance the safety level of these switches from Category 1 on their own to
Categories 2, 3 or 4 when the switches are used in conjunction with our wide range of FF-SR safety relays to
form a safety system.
Typical applications for these switches would use the roller plunger 24CE2- or 24CE3- style in conjunction
with cams on doors with hinges; or our fixed side rotary 24CE16- style for detection of sliding doors. Also
available are a range of panel mounting or top mounting versions to ensure that small space or difficult
mounting can be simply achieved.
Several contact arrangements are available.
Mechanical life:
10 million
Sealing:
standard type: IP66; with boot seal type: IP67
Operating temperature:
24CE
0 °C to 70 °C (32 °F to 158 °F)
Low temperature: -40 °C (-40 °F)
924CE
0 °C to 105 °C (32 °F to 221 °F)
Approvals:
24CE
CE
AC15 B300
DC13 R300
924CE
CSA, CE
per UL file #E41859, 10 A 250 Vac; 1/3 Hp 125-250 Vac
AC15 B300
DC13 R300
Connection:
Harmonised CENELEC 3 or 5 x 0,75 mm2 cable (24CE)
SJTO 3 or 5 x 18 AWG cable (924CE)
Contacts:
Silver
Switching options:
924CE
24CE
Slow action contacts (1NC)
black

blue

red

brown

green

green/yellow

Slow action contacts (1NC/1NO), Break Before Make (BBM)
black

red

blue

Zb
white

brown

green

green/yellow

Zb

white

black

black

Slow action contacts (1NC/1NO), Make Before Break (MBB)
black

blue

red
green

Zb
white

brown
green/yellow

Zb
black

white

Electrical ratings:
Designation & Utilization
Category
AC15

B300

DC13

R300

black

IEC 60947-5-1/EN 60947-5-1
Rated operational current le (A)
at rated operational voltage Ue
120 V 240 V 380 V 480 V 500 V 600 V
3
1.5
125 V 250 V
0,22
0,1

VA
rating
Make
Break
3600
360
28

28

40 / max.
1.58
16 / max.
0.63
25 /
0.98

Free position

2 Holes 5,1 dia
Counter Bored 10,2 dia x 6 deep
(both sides - option 'A' only)

49 / max.
1.93
8/
0.32

1NC: 8,4 /
.33
1NC/1NO: 9,5 /
.374

www.honeywell.com/sensing

Side exit cable
(Option 'A')

Note: connector versions also available

23

COMPACT LIMIT SWITCHES

24CE/924CE Series
OPTIONS
Top pin plunger, boot sealed

Side rotary

Top roller plunger, parallel

ø7,1
OT

PT

PT

DT

DT

ø12,4
OT

24,3 max.

North America/Global

North America/Global
CABLE LENGTH CONTACT
6 ft
1NC/1NO, BBM

North America/Global
CABLE LENGTH CONTACT
3 ft
1NC, BBM
9 ft
1NC, BBM
3 ft
1NC, MBB
3 ft
1NC
9 ft
1NC

REFERENCE
924CE16-S3
924CE16-S9
924CE16-T3
924CE16-Y3
924CE16-Y9

REFERENCE
924CE18-S6

Adjustable plunger

Europe
CABLE LENGTH CONTACT
1m
1NC/1NO, BBM
1m
1NC
6m
1NC

26,8
(1.05)

REFERENCE
24CE16-S1
24CE16-Y1
24CE16-Y6

CABLE LENGTH CONTACT
3 ft
1NC/1NO, BBM

ø10

OPTION
low temperature

REFERENCE
924CE19-S3L1

17,5 max.

North America/Global
CABLE LENGTH CONTACT
3 ft
1NC, BBM
6 ft
1NC, BBM
9 ft
1NC, BBM
25 ft
1NC, MBB
3 ft
1NC, MBB
3 ft
1NC, MBB
6 ft
1NC, MBB
9 ft
1NC, MBB
9 ft
1NC, MBB
3 ft
1NC
9 ft
1NC

OPTION

side exit
side exit
side exit
side exit

REFERENCE
924CE1-S3
924CE1-S6
924CE1-S9
924CE1-T25A
924CE1-T3
924CE1-T3A
924CE1-T6A
924CE1-T9
924CE1-T9A
924CE1-Y3
924CE1-Y9

Europe
CABLE LENGTH CONTACT
12 m
1NC/1NO, BBM
2m
1NC/1NO, BBM
2m
1NC/1NO, BBM
2m
1NC/1NO, BBM
3m
1NC/1NO, BBM
6m
1NC/1NO, BBM
1m
1NC
2m
1NC
3m
1NC

24

OPTION
low temperature
side exit
low temperature

side exit

CABLE LENGTH CONTACT
15 ft
1NC, BBM
21 ft
1NC, BBM
3 ft
1NC, BBM
6 ft
1NC, BBM
6 ft
1NC, BBM
9 ft
1NC, BBM
25 ft
1NC, MBB
25 ft
1NC, MBB
3 ft
1NC, MBB
6 ft
1NC, MBB
9 ft
1NC, MBB
3 ft
1NC
9 ft
1NC

OPTION

side exit

side exit

REFERENCE
924CE2-S15
924CE2-S21
924CE2-S3
924CE2-S6
924CE2-S6A
924CE2-S9
924CE2-T25
924CE2-T25A
924CE2-T3
924CE2-T6
924CE2-T9
924CE2-Y3
924CE2-Y9

Europe

North America/Global

Top pin plunger

30,3 max.

REFERENCE
24CE1-S12B
24CE1-S2
24CE1-S2A
24CE1-S2B
24CE1-S3
24CE1-S6
24CE1-Y1A
24CE1-Y2
24CE1-Y3

www.honeywell.com/sensing

CABLE LENGTH CONTACT
1m
1NC/1NO, BBM
2m
1NC/1NO, BBM
2m
1NC/1NO, BBM
2m
1NC/1NO, BBM
3m
1NC/1NO, BBM
6m
1NC/1NO, BBM
2m
1NC/1NO, MBB
1m
1NC
2m
1NC
2m
1NC
4m
1NC
6m
1NC

OPTION

side exit
low temperature

side exit
side exit

REFERENCE
24CE2-S1
24CE2-S2
24CE2-S2A
24CE2-S2B
24CE2-S3
24CE2-S6
24CE2-T2
24CE2-Y1
24CE2-Y2
24CE2-Y2A
24CE2-Y4
24CE2-Y6A

COMPACT LIMIT SWITCHES

Top roller plunger, perpendicular
Top roller plunger, parallel,
boot sealed

ø12,4

30,3 max.
ø12,4
36,1 max.

North America/Global
North America/Global
CABLE LENGTH CONTACT
3 ft
1NC, BBM
20 ft
1NC
Y20
3 ft
1NC
Y3L1

OPTION

REFERENCE
924CE31-S6
924CE31-

low temperature

924CE31-

Europe
CABLE LENGTH CONTACT
1m
1NC/1NO, BBM
2m
1NC/1NO, BBM
2m
1NC/1NO, BBM
5m
1NC/1NO, BBM
1m
1NC
2m
1NC
3m
1NC

OPTION

low temperature

REFERENCE
24CE31-S1
24CE31-S2
24CE31-S2B
24CE31-S5
24CE31-Y1
24CE31-Y2
24CE31-Y3

CABLE LENGTH
3 ft
6 ft
9 ft
9 ft

CONTACT
1NC, BBM
1NC, BBM
1NC, BBM
1NC, MBB

REFERENCE
924CE3-S3
924CE3-S6
924CE3-S9
924CE3-T9

CONTACT
1NC/1NO, BBM
1NC
1NC

REFERENCE
24CE3-S2
24CE3-Y1
24CE3-Y2

Europe
CABLE LENGTH
2m
1m
2m

Top roller plunger, perpendicular,
boot sealed
ø12,4

Top roller plunger, parallel, panel
mounted

27,7
(1.75)

36,1 max.

Europe
CABLE LENGTH
1m
2m
1m

CONTACT
1NC/1NO, BBM
1NC/1NO, BBM
1NC

REFERENCE
24CE55-S1
24CE55-S2
24CE55-Y1

North America/Global
CABLE LENGTH CONTACT
15 ft
1NC, BBM
S15

REFERENCE
924CE28-

Europe
CABLE LENGTH CONTACT
2m
1NC/1NO, BBM

REFERENCE
24CE28-S2

www.honeywell.com/sensing

25

COMPACT LIMIT SWITCHES

Blank page

26

www.honeywell.com/sensing

COMPACT LIMIT SWITCHES

LS Series
Compact Limit
Switches

LS Series compact limit switches are carefully designed for accurate repeatability under the most stringent conditions.
Compact size and field adjustable features greatly extend the flexibility of these switches. Heads may be positioned at
90° increments. Side rotary models can be adjusted for clockwise and/or counter-clockwise operation. Actuators can be
set and locked in any position through 360°.
The rugged housings and actuator heads are constructed from cast aluminium, capable of withstanding physical abuse.
Protection against oil, water and dust is achieved by O-ring seals on the actuator shaft; a ring seal between head and
body; and a seated compression seal between cover and case.
The LS fits in many places too small for any other fully adjustable limit switch.
Conduit:
Sealing:
Operating temperature:
Approvals:
Contacts:
Switching options:

½ in - 14 NPT
20 mm
NEMA 1, 3, 4, 6, 13
IP67
-29 °C to 71 °C (-20 °F to 160 °F)
-29 °C to 121 °C (-20 °F to 250 °F)
UL, CSA
Silver Cadmium Oxide (1)
Fine Silver
Single Pole, Double Throw
Snap action contacts (1NC/1NO)

½ in - 14 NPT conduit
20 mm conduit
Standard
High
LS-L
Electrical ratings A, B, C, D, E
Electrical ratings F, G
SPDT
4

3

1

2

Actuators

Electrical ratings:

A

10 A, 120, 240 or 480 Vac; 1/3 hp, 120 Vac; ¾ hp, 240
Vac;
0.8 A, 115 Vdc**; 0.4 A, 230 Vdc;** 0.1 A, 550 Vdc;**
Pilot Duty, 600 Vac max.

B

10 A, 120, 240 or 480 Vac; ¼ hp, 120 Vac; ½ hp, 240
Vac.
Pilot Duty, 600 Vac max.

C

10 A, 120 Vac; 1/3 hp, 120 Vac.

D

10 A, 120, 240, 480 Vac; ¼ hp, 120 Vac; ½ hp, 240 Vac;
0.8 A, 115 Vdc**; 0.4 A, 230 Vdc**; 0.1 A, 550 Vdc**;
Pilot Duty, 600 Vac max.

E

10 A, 120, 240 or 480 Vac; 1/3 hp, 120 Vac; ¾ hp, 240
Vac.
Pilot Duty, 600 Vac max.

F

UL Rating:
10 A, 125, 250, or 480 Vac; 1/3 hp, 125 Vac; ¾ hp, 250 Vac;
0.8 A, 125 Vdc**; 0.4 A, 250 Vdc**

G

UL Rating:
10 A, 125, 250 or 480 Vac; ¼ hp, 125 Vac; ½ hp, 250 Vac;
0.8 A, 125 Vdc**; 0.4 A, 250 Vdc**

**

Resistive rating

(1)

Designed for use with inductive loads such as relays, contactors, motors and solenoids. Honeywell does not
recommend the use of silver cadmium oxide switch contacts in non-arcing loads. Non-arcing loads are
generally loads less than 12 volts and/or 0.5 amp.

www.honeywell.com/sensing

27

COMPACT LIMIT SWITCHES

LS Series
Side rotary actuated switches
OPTIONS
Adjustable roller lever

Fixed length lever
Operating force max. (OF):
Pretravel max. (PT):

Standard
Low
Standard
Low

Overtravel min. (OT)
Differential travel max. (DT): Standard
Low
Switching options:
Lever:

13,3 N (3.0 lb)
5,0 N (18 oz)
20°
5°
30°
12°
4°
SPDT
Aluminium, steel roller

Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT)
Differential travel max. (DT):

20 mm

20 mm
Low PT/OF
Low PT
Low PT
20 mm
High temperature
High temperature 20 mm
Indicator light
Low OF

28

ELECTRICAL RATING
A
F
A
B
B
B
A
A
C
A

REFERENCE
1LS1
1LS1-L
1LS1-4C
1LS131
1LS19
1LS19-4C
1LS243
1LS243-4C
1LS501
1LS6

Standard
Low

Switching options:
Lever:

CONDUIT

CONDUIT

Standard
Low
Standard
Low

Low PT
Low OF/PT/DT

www.honeywell.com/sensing

ELECTRICAL RATING
A
F
A
B
B

13,3 N (3.0 lb)
5,0 N (18 oz)
20°
5°
30°
12°
4°
SPDT
Aluminium, nylon roller

REFERENCE
1LS3
1LS3-L
1LS3-4C
1LS58
1LS59

COMPACT LIMIT SWITCHES

No lever
Note: Levers are ordered separately (see pages 69-71
for details)

Adjustable rod
Operating force max. (OF):

Standard
Low
Standard
Low

Pretravel max. (PT):
Operating force max. (OF):
Standard
Low with standard PT
Low with low PT
Pretravel max. (PT):
Standard
Low
Maintained contact
Overtravel min. (OT)
Standard
Maintained contact
Differential travel max. (DT):
Standard
Low PT
Maintained contact
Switching options:

0,51 N m (4.5 in lb)
0,21 N m (30 in oz)
0,11 N m (1 in lb)
20°
5°
55°
30°
35°
12°
4°
20°
SPDT
Maintained contact

Overtravel min. (OT)
Differential travel max. (DT):

1,39 N (5 oz)
0,83 Nm (3 oz)
20°
5°
30°
12°
4°
SPDT
Aluminium rod

Standard
Low

Switching options:
Lever:

CONDUIT

20 mm
Low PT
Low PT/OF/DT

ELECTRICAL RATING
A
F
A
B
B

REFERENCE
1LS10
1LS10-L
1LS10-4C
1LS47
1LS53

SPDT contact
CONDUIT

20 mm
Low OF
Low OF/PT
Low PT

ELECTRICAL RATING
A
F
A
A
B
B

REFERENCE
1LS2
1LS2-L
1LS2-4C
1LS23
1LS56
1LS9

Maintained contact
CONDUIT

ELECTRICAL RATING
A
F

Side rotary, yoke lever, maintained contact
Operating force max. (OF):
Pretravel max. (PT):
Switching options:
Lever:

6LS1
6LS3

8,9 N (2.0 lb)
55°
Maintained
Steel rollers on opposite sides of arm
Nylon rollers on same side of arm

REFERENCE
6LS2
6LS2-L

CONDUIT
20 mm

www.honeywell.com/sensing

ELECTRICAL RATING
A
A
A

REFERENCE
6LS1
6LS1-4C
6LS3

29

COMPACT LIMIT SWITCHES

LS Series
Plunger actuated switches
OPTIONS
Top pin plunger

Side pin plunger

Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT)
Differential travel max. (DT):

Standard
Low
Standard
Low
Standard
Low

Switching options:

31,14 N (7 lb)
10 N (36 oz)
1,65 mm (0.065 in)
6,35 mm (0.25 in)
5,56 mm (0.219 in)
0,51 mm (0.020 in)
0,23 mm (0.009 in)
SPDT

Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT)
Differential travel max. (DT):
Switching options:

CONDUIT
20 mm
CONDUIT

20 mm
Low OF/OT/DT

ELECTRICAL RATING
A
F
A
E

REFERENCE
2LS1
2LS1-L
2LS1-4C
2LS111

Top roller plunger
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT)
Differential travel max. (DT):
Switching options:

31,14 N (7 lb)
1,65 mm (0.065 in)
5,56 mm (0.219 in)
0,51 mm (0.020 in)
SPDT

Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT)
Differential travel max. (DT):
Switching options:

20 mm

20 mm

30

ELECTRICAL RATING
A
F
A

REFERENCE
4LS1
4LS1-4C

Side roller plunger

CONDUIT

CONDUIT

ELECTRICAL RATING
A
A

40,03 N (9 lb)
2,8 mm (0.110 in)
6,35 mm (0.25 in)
1,02 mm (0.040 in)
SPDT

REFERENCE
5LS1
5LS1-L
5LS1-4C

www.honeywell.com/sensing

ELECTRICAL RATING
A
A

40,03 N (9 lb)
2,8 mm (0.110 in)
5,56 mm (0.219 in)
1,02 mm (0.040 in)
SPDT

REFERENCE
3LS1
3LS1-4C

COMPACT LIMIT SWITCHES

Wobble actuated switches
These switches will operate by moving actuator in any
direction except direct pull.
Operating force max. (OF):
Pretravel max. (PT):
Switching options:

1,39 N (5 oz)
28,6 mm (1,125 in)
SPDT

OPTIONS
Flexible cable

Coil spring
Ø 6,17 ±0.08
(0.264 ±0.003)

Ø 4,80 ±0.08
(0.189 ±0.003)

141,0 ±2,54
(5,550 ±0.10)

141,0 ±2,54
(5,550 ±0.10)

CONDUIT

20 mm

ELECTRICAL RATING
D
G
D

REFERENCE
8LS1
8LS1-L
8LS1-4C

CONDUIT
20 mm

ELECTRICAL RATING
D
D

REFERENCE
8LS152
8LS152-4C

Steel wire
Spring rod

Operating force max. (OF):
Pretravel max. (PT):

0,28 N (1 oz)
63,5 mm (2.5 in)

191,3
(7.53)

CONDUIT
20 mm

CONDUIT
20 mm

ELECTRICAL RATING
D
D

ELECTRICAL RATING
D
D

REFERENCE
8LS125
8LS125-4C

REFERENCE
8LS3
8LS3-4C

www.honeywell.com/sensing

31

PRECISION LIMIT SWITCHES

BF Series
Plastic
Enclosed Basic
Switches

BF Series Plastic Enclosed Basic Switches are available with a wide variety of actuators, and are designed for easy
mounting and wiring. BF switches are designed to allow mounting with the cover either towards or away from the
mounting surface.
Switches with lever type actuators are adjustable in two directions. The entire actuator can be rotated around its
mounting bushing, and the angle of the lever can also be changed.
Sealing:
Operating temperature:
Approvals:
Termination:
Contacts:
Electrical ratings:

NEMA 1, 3, 4, 13
-32 °C to 71 °C (-25 °F to 160 °F)
UL
½ in - 14NPT
Silver
11 A - 125 Vac, 250 Vac or 277 Vac
5 A - 125 Vac, 250 Vac or 277 Vac

A
B

Switching options:
SPDT

Single Pole, Double Throw,
Snap action contacts (1NC/1NO)

Actuators

Plunger actuated switches
OPTIONS
Top pin plunger
14,3
0.56

Top roller arm, adjustable
18,3
0.72

Ø 7,1 Max.
0.28
,9
39 7
1.5

17,5
0.69
65,28
2.57

23,1
0.91 Max.

44,5
1.75

15,5 35,1
0.61 1.38
17,5
0.69

4,9
9,5
0.19 0.38

58,7
2.31
73,5
2.89

Conduit thread

44,5
1.75

Operating force max. (OF):
Differential travel max. (DT):
ACTUATOR POSITION
Left
Right

73,6
2.90

12,23 N (44 oz)
0,64 mm (0.025 in)
ELECTRICAL RATING
B
B

4,9
9,5
0.19 0.38

REFERENCE
BFL1-BP1
BFR1-BP1

15,5 35,1
0.61 1.38

58,7
2.31
73,5
2.89

Operating force max. (OF):
Differential travel max. (DT):
ACTUATOR POSITION
Left
Right

32

www.honeywell.com/sensing

10,56 N (38 oz)
1,65 mm (0.065 in)
ELECTRICAL RATING
B
B

REFERENCE
BFL1-BL1
BFR1-BL1

PRECISION LIMIT SWITCHES

Plunger actuated switches
(continued)

Wobble actuated switches
Operating force max. (OF):

1,95 N (7 oz)

OPTIONS
Coil spring

Top roller arm, adjustable, one
way

Spring wire

14,3
0.56

14,3
0.56

Ø 7,1 Max.
0.28

Ø 1,02
0.05

39
1.5 ,6
6
19,05
0.75

18,3
0.72

32,26
1.27
180˚
169,9
6.69

17,5
0.69
35,1
1.38

Ø 15,5
0.61

168,8
6.65

73,6
2.90
44,5
1.75

17,5
0.69

14,73
0.58

58,7
2.31

9,5
0.38

4,9
0.19

Operating force max. (OF):
Left
Right
ELECTRICAL
RATING
B
B

15,5 35,1
0.61 1.38

44,5
1.75

35,1
1.38

44,5
1.75

73,5
2.89

ACTUATOR
POSITION
Left
Right

17,5
0.69

58,7
2.31
73,5
2.89

4,9
9,5
0.19 0.38

3,61 N (13 oz)
10,56 N (38 oz)
REFERENCE
BFL1-BL3
BFR1-BL3

ACTUATOR
POSITION
Left
Left
Right

4,9
9,5
0.19 0.38

ELECTRICAL
RATING
A
B
B

73,5
2.89

REFERENCE
BFL1-AW1
BFL1-BW1
BFR1-BW1

14,7 15,5
0.58 0.61

58,7
2.31

ACTUATOR
POSITION
Left
Right

ELECTRICAL
RATING
B
B

REFERENCE
BFL1-BW4
BFR1-BW4

Plastic

Low force rod

14,3
0.56

250˚

Ø 7,1
0.28

18,3
0.72

17,5
0.69

73,6
2.90
44,5
1.75

4,9
0.19

35,1
1.38

9,5
0.38

14,73
0.58

58,7
2.31

Ø 15,5
0.61
249,25
9.81

73,5
2.89

Operating force max. (OF):
Left
Right
ACTUATOR
POSITION
Left
Right

ELECTRICAL
RATING
B
B

10,56 N (38 oz)
3,61 N (13 oz)

17,5
0.69

REFERENCE
BFL1-BL2
BFR1-BL2

44,5
1.75

4,9
0.19

35,1
1.38

9,5
0.38

15,5
0.61

58,7
2.31

C

73,5
2.89

Type -BW3
ACTUATOR
POSITION
Left,
179,3 mm (7.06 in) length rod
Left,
249,25 mm (9.8 in) length rod

ELECTRICAL
RATING
A

REFERENCE

B

BFL1-BW3

BFL1-AW2

www.honeywell.com/sensing

33

PRECISION LIMIT SWITCHES

BZE/DTE Series
Compact Enclosed
Switches

The BZE/DTE Series general purpose enclosed limit switches offer precision operation and sturdy
actuation in a compact but rugged aluminium housing. The large wiring enclosure means that the user
can get access to wire the device simply. The switch incorporates high repeatability of the switch point
early in the travel of the switch. This is achieved through a very tolerant over-travel mechanism which
ensures that application drift will not affect long term accuracy of the switch.
Conduit:
Sealing:
Operating temperature:

E6
V6
Standard
Low

Approvals:
Contacts:

Electrical ratings A, B, C
Electrical rating D
Switching options:
SPDT

½ in - 14 NPT
NEMA 1
NEMA 1, 3
-32 °C to 71 °C (-25 °F to 160 °F)
-40 °C to 71°C (-40 °F to 160 °F)
UL, CSA, CE
Silver
Gold
Single Pole, Double Throw
Snap action contacts (1NC/1NO)

Actuators

DPDT

Double Pole, Double Throw
Snap action contacts (2NC/2NO)

Electrical ratings:
A
UL/CSA Rating:

34

15 A, 125, 250 or 480 Vac:
2 A, 600 Vac:
1
/8 Hp, 125 Vac: ¼ Hp, 250 Vac:
½ A, 125 Vdc: ¼ A, 250 Vdc

B

UL/CSA Rating:

10 A, 125 or 250 Vac:
0.3 A, 125 Vdc: 0.15 A, 250 Vdc

C

UL/CSA Rating:

15 A, 125, 250 or 480 Vac;
¼ Hp, 125 Vac; ½ Hp, 250 Vac;
½ A, 125 Vdc; ¼ A, 250 Vdc

D

UL/CSA Rating:

1 A - 125 Vac

www.honeywell.com/sensing

PRECISION LIMIT SWITCHES

E6/V6
E6 (side mount) and V6 (flange mount) switches are offered with or without actuator seal boots. Both have a combination insulator/ seal cemented inside the
bottom enclosure. Lead washers are used to seal the mounting holes on side mount switches. All side mount switches are installed with #6 screws, except the
BZE6-2RN7 (#8 screws). Removal of the bottom enclosure exposes the terminals for easy wiring.

Momentary contact
OPTIONS
Top pin plunger
2,0 REF
(0.08)

23,4
(0.92)

43,7 OP
(1.72)
19,0
(0.75)
25,4
(1.00)
25,4
(1.00)

Top roller plunger, parallel
10,6
(0.42)

Ø 8,4
(0.33)
1/2-14 NPT
Threads

63,5
OP
(2.50)

25,4
(1.00)

56,6 OP
(2,23)

77,2
(3.04)

41,4
(1.63)

25,4
(1.00)
54,1
(2.13)

Flange mount
without boot seal

Side mount
with boot seal

OP 49,61
(1.953)

1/2-14 NPT
Threads

With boot seal
Operating force max. (OF):SPDT Standard
2,50 N to 6,67 N (9 oz to 24 oz)
SPDT Low temperature 4,17 N to 10,84 N (15 oz to 39 oz)
DPDT 6,95 N to 16,4 N (25 oz to 59 oz)
Pretravel max. (PT):
SPDT
1,98 mm (0.078 in)
DPDT
2,8 mm (0.110 in)
Overtravel min. (OT):
SPDT
5,56 mm (0.219 in)
DPDT
3,18 mm (0.125 in)
Differential travel max. (DT):
SPDT
0.05 mm (0.002 in)
DPDT
1,52 mm (0.060 in)

25,4
(1.00)
25,4
(1.00)

25,4
(1.0)

22,6
(0.89)
77,2
(3.04)

Side mount
with boot seal

Side mount
without boot seal

With boot seal
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):

Low temperature/High OF
#8 screws
Gold contacts

SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT

ELECTRICAL RATING
A
B
A
A
D

REFERENCE
BZE6-2RN
DTE6-2RN
BZE6-2RN34
BZE6-2RN7
BZE6-2RN72

22,6
(0.89)
69,6
(2.740)

25,4
(1.00)

Side mount
CONTACT
SPDT
DPDT
SPDT
SPDT
SPDT

Ø
15,75
(0.62)

19,0
(0.75)

19,0
(0.75)

22,6
(0.89)

21,1
(0.83)

12,7 (0.50) Ø
X
4,6 (0.18)
Wide Roller

12,7 (0.50) Ø
X
4,6 (0.18) W
Roller

1/2-14 NPT
Threads
4,3 Ø (2)
(0.17)

44,4
(1.75)

22,6
(0.89)
77,2
(3.04)

23,4
(0.92)
Ø 8,4
(0.33)

2,50 N to 6,67 N (9 oz to 24 oz)
5,56 N to 13,34 N (20 oz to 48 oz)
1,98 mm (0.078 in)
2,8 mm (0.110 in)
5,56 mm (0.219 in)
3,18 mm (0.125 in)
0,01 mm to 0,05 mm
(0.0004 in to 0.0020 in)
1,52 mm (0.060 in)

Side mount
CONTACT
SPDT
DPDT

ELECTRICAL RATING
A
B

REFERENCE
BZE6-2RN80
DTE6-2RN80

ELECTRICAL RATING
A

REFERENCE
BZV6-2RN80

Flange mount
Flange mount
CONTACT
SPDT
DPDT

ELECTRICAL RATING
A
B

REFERENCE
BZV6-2RN
DTV6-2RN

CONTACT
SPDT

CONDUIT

Without boot seal
Operating force max. (OF):

Without boot seal
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):

SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT

2,50 N to 3,61 N (9 oz to 13 oz)
5,56 N to 11,12 N (20 oz to 40 oz)
0,38 mm (0.015 in)
3,81 mm (0.150 in)
5,56 mm (0.219 in)
2,24 mm (0.088 in)
0,05 mm (0.002 in)
1,52 mm (0.060 in)

Side mount
CONTACT
SPDT
DPDT

ELECTRICAL RATING
A
B

REFERENCE
BZE6-2RQ
DTE6-2RQ

Flange mount
CONTACT
SPDT

Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):

2,50 N to 3,61 N (9 oz to 13 oz)
6,67 N to 13,34 N (24oz to 48 oz)
0,38 mm (0.015 in)
3,58 mm (0.141 in)
3,55 mm (0.140 in)
3,18 mm (0.125 in)
0,05 mm (0.002 in)
1,52 mm (0.060 in)

Side mount
CONTACT
SPDT
Field adjustable roller SPDT
Field adjustable roller DPDT

CONDUIT

ELECTRICAL RATING
A
A
B

REFERENCE
BZE6-2RQ8
BZE6-2RQ9
DTE6-2RQ9

CONDUIT

ELECTRICAL RATING
A

REFERENCE
BZV6-2RQ8

Flange mount
CONTACT
SPDT

ELECTRICAL RATING
A

SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT

REFERENCE
BZV6-2RQ

www.honeywell.com/sensing

35

PRECISION LIMIT SWITCHES

BZE/DTE Series
E6/V6 Momentary contact (continued)
Top roller plunger, perpendicular

Roller arm, adjustable
12,7 (0.50) Ø
X
4,6 (0.18) W
Roller
56,6 OP
(2,23)
19,0
(0.75)
25,4
(1.00)
25,4
(1.00)

22,6
(0.89)
77,2
(3.04)

Side mount
with boot seal

Flange mount
without boot seal

With boot seal
Operating Force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):

2,60 N to 6,67 N (9 oz to 24 oz)
1,98 mm (0.078 in)
5,56 mm (0.219 in)
0,01 mm to 0,05 mm
(0.0004 in to 0.0020 in)

Side mount
CONTACT
SPDT

ELECTRICAL RATING
A

REFERENCE
BZE6-2RN81

Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):

SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT

2,50 N to 3,61 N (9 oz to 13 oz)
6,67 N to 13,34 N (24 oz to 48 oz)
0,38 mm (0.015 in)
3,58 mm (0.141 in)
3,55 mm (0.140 in)
3,18 mm (0.125 in)
0,05 mm (0.002 in)
1,52 mm (0.060 in)

Side mount
CONTACT
SPDT
DPDT

Flange mount
with boot seal

Operating temperature: Standard
Low
Roller:

-32 °C to 71 °C (-25 °F to 160 °F)
-40 °C to 71 °C (-40 °F to 160 °F)
Steel

With boot seal
Operating Force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):

SPDT
DPDT

2,78 N to 5,56 N (10 oz to 20 oz)
4,78 mm (0.188 in)
5,56 mm (0.219 in)
0,15 mm (0.006 in)
4,19 mm (0.165 in)

DPDT
DPDT

13,34 N (48 oz)
7,92 mm (0.312 in)

Side mount

Without boot seal
Operating Force max. (OF):

Side mount
without boot seal

ELECTRICAL RATING
A
B

REFERENCE
BZE6-2RQ81
DTE6-2RQ81

ELECTRICAL RATING
A

REFERENCE
BZV6-2RQ81

Operating Force max. (OF):
Pretravel max. (PT):
CONTACT
SPDT
DPDT
Low temperature SPDT

ELECTRICAL RATING
A
B
A

REFERENCE
BZE6-2RN2
DTE6-2RN2
BZE6-2RN234

Flange mount
Operating Force max. (OF):
Pretravel max. (PT):
CONTACT
SPDT
DPDT

DPDT
DPDT

2,78 N to 8,34 N (10 oz to 30 oz)
6,76 mm (0.266 in)
ELECTRICAL RATING
A
B

REFERENCE
BZV6-2RN2
DTV6-2RN2

Flange mount
CONTACT
SPDT

Without boot seal
Operating Force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
Side mount
Flange mount

36

CONTACT
SPDT
SPDT

www.honeywell.com/sensing

2,78 N to 5,00 N (10 oz to 20 oz)
4,78 mm (0.188 in)
5,56 mm (0.219 in)
0,15 mm (0.006 in)
ELECTRICAL RATING
A
A

REFERENCE
BZE6-2RQ2
BZV6-2RQ2

PRECISION LIMIT SWITCHES

One way roller lever

Manual palm button
36,6
1.44
18,3
0.72

38,1
1.50
31,8
1.25

1/2 - 14 NPSM
5 THREADS MIN
78,5
3.09

4,3
Ø (2)
0.17

44,4
1.75

22,6
0.89
77,2
3.04

Side mount
with boot seal

Side mount
with boot seal

With boot seal
Operating Force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
CONTACT
SPDT

Side mount

41,4
1.63

25,4
1.00
54,1
2.13

With boot seal
2,22 N to 5,56 N (8 oz to 20 oz)
5,94 mm (0.234 in)
5,56 mm (0.219 in)
0,15 mm (0.006 in)
ELECTRICAL RATING
A

REFERENCE
BZE6-2RN28

Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
Flange mount

Rod lever

CONTACT
SPDT

2,78 N to 5,56 N (10 oz to 20 oz)
4,78 mm (0.188 in)
5,56 mm (0.219 in)
0,15 mm (0.006 in)
ELECTRICAL RATING
A

REFERENCE
BZV6-2RN4

Wobble, coil spring

Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):

18,24 mm (0.718 in)
21,29 mm (0.838 in)
5,82 mm (0.229 in)

These switches will operate by moving actuator in any direction except direct
pull.

152,4
(6.0)
18,29
(0.72)
250˚

53,19
(2.09)
Ø 15,75
(0.62)

19,05
(0.75)
25,4
(1.00)

22,6
(0.89)
69,60
(2,74)
77,2
(3.04)

Flange mount
without boot seal

With boot seal

With boot seal
Operating force max. (OF):
Side mount
Flange mount

CONTACT
SPDT
SPDT

Flange mount
with boot seal

Side mount
with boot seal

0,83 N to 1,95 N (3 oz to 7 oz)
ELECTRICAL RATING
A
A

REFERENCE
BZE6-2RN62
BZV6-2RN62

Operating force max. (OF):
Pretravel max. (PT):
Side mount
Flange mount

CONTACT
SPDT
SPDT

1,95 N (7 oz)
15°
ELECTRICAL RATING
A
A

REFERENCE
BZE6-2RN18
BZV6-2RN18

Without boot seal
Operating force max. (OF):
Side mount
Flange mount

CONTACT
SPDT
SPDT

0,56 N to 1,39 N (2 oz to 5 oz)
ELECTRICAL RATING
A
A

REFERENCE
BZE6-2RQ62
BZV6-2RQ62

www.honeywell.com/sensing

37

PRECISION LIMIT SWITCHES

BZE/DTE Series
E6/V6 Maintained contact (reset) switches
The switches shown below provide maintained contact after the operating
force on either top or bottom plunger is released.
Note: The top plungers on these switches provide more accurate and uniform
operation than the “reset” plungers and should be used when closely held
operating characteristics are required.
Switching:
SPDT

Single Pole, Double Throw
(1NC/1NO) Maintained

OPTIONS
Top pin plunger

Roller arm, adjustable

Side mount
with boot seal

Flange mount
without boot seal

Side mount
Operating force max. (OF): With boot seal
Without boot seal
Pretravel max. (PT):
With boot seal
Without boot seal
Overtravel min. (OT):
CONTACT
With boot seal
SPDT Maintained
Without boot seal SPDT Maintained

1,67 N to 5,56 N (6 oz to 20 oz)
1,67 N to 2,64 N (6 oz to 9.5 oz)
1,98 mm (0.078 in)
0.30 mm (0.012 in)
4,75 mm (0.187 in)

ELECTRICAL RATING
C
C

REFERENCE
BZE6-RNX1
BZE6-RQX2

Flange mount
with boot seal

Side mount
Operating Force max. (OF): With boot seal
Without boot seal
Pretravel max. (PT):
Overtravel min. (OT):
CONTACT
With boot seal
Maintained
Without boot seal Maintained

Top roller plunger
Ø 12,7 (0.50) x 4,6 (0.18)
Wide roller

56,69
(2.232)

53,19
(2.094)
Reset
FP

19,0
(0.75)
Ø 15,75
(0.62)

25,4
(1.00)

22,6
(0.89)

Ø 25,4
(1.0)
14,22
(0.56)

Side mount
with boot seal

40,08
(1.58)

23,19
(0.913)

Side mount
without boot seal

69,59
(2.74)

Side mount
Operating force max. (OF): With boot seal 3,34 N to 15,57 N (12 oz to 56 oz)
Without boot seal 1,67 N to 2,64 N (6 oz to 9.5 oz)
Pretravel max. (PT):
With boot seal
1,98 mm (0.078 in)
Without boot seal
0,30 mm (0.012 in)
Overtravel min. (OT):
With boot seal
4,75 mm (0.187 in)
Without boot seal
3,55 mm (0.140 in)
CONTACT
With boot seal
SPDT
Without boot seal SPDT

38

CONDUIT

ELECTRICAL RATING
C
C

Side mount
without boot seal

REFERENCE
BZE6-RN80X2
BZE6-RQ8X2

www.honeywell.com/sensing

CONDUIT

ELECTRICAL RATING
C
C

4,45 N (16 oz)
3,34 N (12 oz)
4,78 mm (0.188 in)
5,56 mm (0.219 in)
REFERENCE
BZE6-RN2X1
BZE6-RQ2X2

PRECISION LIMIT SWITCHES

E7 Metal standard enclosed switch
Mechanical life:
Sealing:

10 million
IP50 Standard
IP65 Sealed
-30 °C to 70 °C (-22 °F to 158 °F)
IEC 60947-5-1
EN 60947-5-1

Without boot seal
With boot seal
Operating temperature:
Approvals:
Switching options:
SPDT

Actuators

Single Pole, Double Throw
Snap action contacts (1NC/1NO)

Top roller plunger, perpendicular, without boot seal
DPDT

Double Pole, Double Throw
Snap action contacts (2NC/2NO)

0,38
(0.015)
Pretravel

Ø 12,7 x 4,57 Wide roller
(0.50 x 0.18)

44,53
OP
(1.75)
13,97
(0.55)
25,4
(1.00)

Ø 14,73
(0.58)
5,84
(0.23)

4,06
(0.16)

CONTACT
SPDT

OPTIONS
Top pin plunger
With boot seal

CONDUIT
PG 13.5

12,7
(0.50)

76,40
(3,01)

ELECTRICAL RATING

REFERENCE
BZE7-2RQ81-PG

Top roller lever, boot seal

1,93
(0.076)
Pretravel

Ø 19,05 x 7,92 wide roller
(Ø 0.75 x 0.312)

39,88
(1.57)

Ø 8,38
(0.33)

18,29
(0.72)

24,38
(0.91)

225˚

38,58 OP
(1.519)
13,97
(0.55)

48,11
(1.894)

25,4
(1.00)

13,97
(0.55)

Ø 14,73
(0.58)
5,84
(0.23)

4,06
(0.16)

76,40
(3,01)

25,4
(1.00)

12,7
(0.50)

Ø 14,73
(0.58)
5,84
(0.23)

CONTACT
SPDT
SPDT
DPDT

CONDUIT
PG 13.5
20 mm
PG 13.5

ELECTRICAL RATING

CONDUIT
PG 13.5

ELECTRICAL RATING

REFERENCE
BZE7-2RN-PG
BZE7-2RN-C
DTE7-2RN-PG

CONTACT
SPDT
SPDT

4,06
(0.16)

CONDUIT
PG 13.5
20 mm

76,40
(3,01)

12,7
(0.50)

ELECTRICAL RATING

REFERENCE
BZE7-2RN2-PG
BZE7-2RN2-C

Without boot seal
CONTACT
SPDT

REFERENCE
BZE7-2RQ-PG

Top roller plunger, parallel, without boot seal
3,8
(0.15)
Pretravel

Wobble, coil spring, boot seal

151,13
(5.95)

Ø 12,7 x 4,5 wide roller
(Ø 0.50 x 0.18)

13,97
(0.55)

44,5
OP
(1.75)
13,97
(0.55)

25,4
(1.00)

25,4
(1.00)

Ø 14,73
(0.58)
5,84
(0.23)

CONTACT
SPDT

4,06
(0.16)

CONDUIT
PG 13.5

76,40
(3,01)

Ø 14,73
(0.58)
5,84
(0.23)

4,06
(0.16)

12,7
(0.50)

ELECTRICAL RATING

CONTACT
SPDT

CONDUIT
PG 13.5

76,40
(3,01)

12,7
(0.50)

ELECTRICAL RATING

REFERENCE
BZE7-2RN18-PG

REFERENCE
BZE7-2RQ8-PG

www.honeywell.com/sensing

39

PRECISION LIMIT SWITCHES
The BAF/DTF Series is available with or without boot seals. The elastomer
boot on sealed actuator versions protects the actuating mechanism and the
internal basic switch from contamination. They are therefore suitable for
wash-down applications. Both sealed and unsealed versions are available with
the actuators on the right or left hand side.

BAF/DTF
Series
High Capacity
Enclosed
Switches

The cover plate is removable to allow ease of wiring and switch replacement
without having to dismount the housing.
The BAF/DTF Series is suitable for use in packaging equipment, farm
machinery, conveyors, overhead cranes and hoists.

Actuators

Approvals:
Sealing:
Operating temperature:
Conduit:
Contacts:
Electrical ratings:
B

D

Switching options:
D
SPDT

UL, CSA
NEMA 1, 3, 4, 13
-2RQ9
NEMA 1
-32 °C to 71 °C (-25 °F to 160 °F)
½ in - 14 NPT
Silver
UL/CSA Rating:
10 A, 125 or 250 Vac;
0.3 A, 125 Vdc; 0.15 A,
250 Vdc.

Momentary contact
OPTIONS
Top pin plunger

UL/CSA Rating: 20 A, 125, 250 or 480 Vac;
1 Hp, 125 Vac; 2 Hp, 250 Vac;
½ A, 125 Vdc; ¼ A, 250 Vdc;
Lamp Load - 10 A, 125 Vac.
Single Pole, Double Throw
Snap action contacts (1NC/1NO)
Left-hand

Right-hand

*28,2
on DTF2 Types
1.11

With boot seal
B

DPDT

Double Pole, Double Throw
Snap action contacts (2NC/2NO)

Operating force max. (OF):
Pretravel max. (PT):

BAF/DTF
BAF
DTF
Overtravel min. (OT):
BAF
DTF
Differential travel max. (DT):
BAF
DTF
Operating position (OP):
BAF
DTF

ACTUATOR POSITION
Right
Left
Right
Left

40

www.honeywell.com/sensing

CONTACT
SPDT
SPDT
DPDT
DPDT

ELECTRICAL RATING
D
D
B
B

11,2 N (2.5 lb)
2,39 mm (0.094 in)
3,59 mm (0.141 in)
5,56 mm (0.219 in)
3,96 mm (0.156 in)
0,26 mm (0.010 in)
1,53 mm (0.060 in)
53,19 mm (2.094 in)
52,07 mm (2.050 in)
REFERENCE
BAF1-2RN-RH
BAF1-2RN-LH
DTF2-2RN-RH
DTF2-2RN-LH

PRECISION LIMIT SWITCHES

Momentary contact (continued)
Top roller plunger, parallel

Right-hand

Roller arm, adjustable

Left-hand

*28,2
on DTF2 Types
1.11

O-ring actuator seal
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):

BAF/DTF
BAF/DTF
BAF
DTF
Differential travel max. (DT):
BAF
DTF
Operating position (OP):
BAF
DTF
ACTUATOR POSITION
Right
Left
Right
Left

CONTACT
SPDT
SPDT
DPDT
DPDT

ELECTRICAL RATING
D
D
B
B

35,6 N (8.0 lb)
3,18 mm (0.125 in)
4,75 mm (0.187 in)
3,18 mm (0.125 in)
0,19 mm (0.0075 in)
1,53 mm (0.060 in)
64,69 mm (2.547 in)
63,88 mm (2.515 in)
REFERENCE
BAF1-2RQN8-RH
BAF1-2RQN8-LH
DTF2-2RQN8-RH
DTF2-2RQN8-LH

Adjustable 360° horizontally
BAF/DTF
BAF
DTF
Overtravel min. (OT):
BAF
DTF
Differential travel max. (DT):
BAF
DTF
Operating position (OP):
BAF
DTF
ACTUATOR POSITION
Right
Left
Right
Left

CONTACT
SPDT
SPDT
DPDT
DPDT

ELECTRICAL RATING
D
D
B
B

Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
ACTUATOR POSITION
Right
Left
Right
Right

Field adjustable roller plunger
Operating force max. (OF):
Pretravel max. (PT):

With boot seal

11,2 N (2.5 lb)
2,39 mm (0.094 in)
3,18 mm (0.125 in)
3,96 mm (0.156 in)
3,18 mm (0.125 in)
0,26 mm (0.010 in)
1,53 mm (0.060 in)
64,69 mm (2.547 in)
63,88 mm (2.515 in)

CONTACT
SPDT
SPDT
DPDT
DPDT

BAF
DTF
BAF
DTF
BAF
DTF
BAF
DTF
ELECTRICAL RATING
D
D
B
B

8,90 N (2.0 lb)
11,1 N (2.5 lb)
5,56 mm (0.219 in)
7,93 mm (0.312 in)
6,35 mm (0.25 in)
5,56 mm (0.219 in)
0,51 mm (0.020 in)
3,05 mm (0.120 in)
REFERENCE
BAF1-2RN2-RH
BAF1-2RN2-LH
DTF2-2RN2-RH
DTF2-2RN2-LH

One way roller lever

REFERENCE
BAF1-2RQ9-RH
BAF1-2RQ9-LH
DTF2-2RQ9-RH
DTF2-2RQ9-LH

With boot seal
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
ACTUATOR POSITION
Right
Left

www.honeywell.com/sensing

CONTACT
SPDT
SPDT

8,90 N (2.0 lb)
5,56 mm (0.219 in)
6,35 mm (0.25 in)
0,51 mm (0.020 in)
ELECTRICAL RATING
D
D

REFERENCE
BAF1-2RN28-RH
BAF1-2RN28-LH

41

PRECISION LIMIT SWITCHES

BAF/DTF Series
Momentary contact (continued)

Maintained contact (reset) switches

Manual palm button

Top pin plunger

Right-hand

Left-hand

*28,2
on DTF2 Types
1.11

With boot seal
With boot seal
Operating force max. (OF):
ACTUATOR POSITION
Right
Left

CONTACT
SPDT
SPDT

8,90 N (2.0 lb)
ELECTRICAL RATING
D
D

REFERENCE
BAF1-2RN4-RH
BAF1-2RN4-LH

Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
ACTUATOR POSITION
Right

Wobble, coil spring

CONTACT
Maintained SPDT

ELECTRICAL RATING
D

REFERENCE
BAF1-3RNX1

Roller arm, adjustable

Left-hand

Right-hand

With boot seal
Pretravel max. (PT):
ACTUATOR POSITION
Right
Left

7,79 N (1.75 lb)
2,39 mm (0.094 in)
5,56 mm (0.219 in)

82,6
(3.25)
101,6
(4.00)

15°
CONTACT
SPDT
SPDT

ELECTRICAL RATING
D
D

REFERENCE
BAF1-2RN18-RH
BAF1-2RN18-LH

With boot seals on roller arm and plunger
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Operating position (OP):
ACTUATOR POSITION
Right
Left

42

www.honeywell.com/sensing

CONTACT
Maintained SPDT
Maintained SPDT

6,67 N (1.5 lb)
5,56 mm (0.219 in)
6,35 mm (0.25 in)
60,71 mm (2.390 in)
ELECTRICAL RATING
D
D

REFERENCE
BAF1-3RN2X-RH
BAF1-3RN2X-LH

PRECISION LIMIT SWITCHES

Wobble, coil spring
32,5
(1.28)
Ø 7,1
(0.28)
158,5
(6.24)

1/2-14 NPT
Threads
Ø 6,9
(3)
(0.27)

27,4
(1.08)

20,6
(0.81)
41,4
(1.63)

27,4
(1.08)

82,6
(3.25)

101,6
(4.00)

With boot seals on wobble stick and plunger
Pretravel max. (PT):
ACTUATOR POSITION
Right

15°
CONTACT
Maintained SPDT

ELECTRICAL RATING
D

REFERENCE
BAF1-3CN18X1

www.honeywell.com/sensing

43

HEAVY DUTY LIMIT SWITCHES

HDLS Series
Heavy Duty Limit
Switches

The HDLS Series Heavy Duty Limit Switches offer a wide choice of mounting and actuator options.
Housed in a rugged, die-cast zinc body which is epoxy coated for protection, they are perfectly suited to
special applications in harsh duty environments where conventional limit switches may not be used.
Versatile and full featured, they are designed for long life.
Listings referenced in this section are mainly standard. Low temperature and fluorocarbon (FC, high
temperature) construction is available in all forms of HDLS limit switches. For temperature ranges see
table opposite. Also available are factory sealed, pre-wired switches.
Low temperature switches have fluorosilicone diaphragm, shaft seals and external boot seal (where
applicable) plus a low temperature lubricant. If prewired with cable, temperature limits are -10 °C (14 °F)
flex and -30 °C (22 °F) no flex.
To order a low temperature version insert the additional letters Y and B as in the following example:
LSA1A - standard side rotary plug-in switch
LSYAB1A - low temperature version.
Completely fluorocarbon (FC) sealed, high temperature, chemical resistance switches have a full FC
body gasket covering the switch cavity. Rotary types have an extra FC seal on the operating shaft, while
plunger versions have FC boot seals. They are for use in applications where the environment includes
fire-resistant synthetic fluids. The additional FC seals also promote longer operating life for rotary
actuacted HDLS switches in applications where the temperatures are normally -12 °C to 121 °C (10 °F to
250 °F). If prewired with cable, temperature limits are 105 °C (221 °F) dry and 60 °C (140 °F) wet.
To order a fluorocarbon (FC) sealed switch insert the additional letters Y and C as in the following
example:
LSA1A - standard side rotary plug-in switch
LSYAC1A - completely FC sealed version.

Actuators

Factory sealed, pre-wired limit switches have the entry area completely sealed and are available with 6 ft
(1,83 m), STOOW-A cable or 4, 5 or 9-pin connectors. NEMA ratings are, for cable version 1, 4, 6, 6P, 12,
for connector version 1, 4, 6, 6P, 12, 13.
To order a factory sealed switch add the appropriate letter:
Circuitry

Cable

½ in Connector (available with ½ in conduit tap only)

SPDT

C

A (4 pin mini)
B (5 pin mini)
DD (4 pin micro)

DPDT

Levers: Levers for side rotary
types are ordered separately (see
pages 69-71 for details)

M (¾ in only)

R (9 pin)

Example:
LSA1AC - LSA1A with 6 ft of 5 conductor STOOW-A cable
LSJ2BM-7N - LSJ2B-7N with 6 ft of 9 conductor STOOW-A cable
LSA1AB - LSA1A with 5 pin receptable
LSA1ADD - 4 pin micro-change connector

Electrical ratings
10 amps continuous carry. Circuits on any one pole must be the same polarity.
ac Volts
Pilot duty: 600 Vac, 720 VA

A
SPDT
NEMA
A600
B
DPDT
NEMA
B600
C
SPDT/DPDT

Amps at 0.35 Power Factor
Vac
Make
120
60
240
30
480
15
600
12
120
30
240
15
480
7.5
600
6
250 Vac or 60 Vdc, 0.050 amp max.

Break
6
3
1.5
1.2
3
1.5
0.75
0.60

dc Volts
Pilot duty: 240 Vdc, 30 watts

A
SPDT
B
DPDT
C
SPDT/DPDT

44

Make and Break Amps
Vdc
Inductive
120
0.25
240
0.15
120
0.25
240
0.15
250 Vac or 60 Vdc, 0.050 amp max.

www.honeywell.com/sensing

Resistive
0.8
0.4
0.8
0.4

HEAVY DUTY LIMIT SWITCHES
Operating temperatures

Environmental
seal
performance

www.honeywell.com/sensing

45

HEAVY DUTY LIMIT SWITCHES

HDLS Series Side rotary actuated switches
Levers: Levers for side rotary types are ordered separately (see pages
69-71 for details)
Approvals:
Operating force (Newton meters, N m/in lb):

Conduit:
Contacts:
Switching options:
SPDT

NEMA 1, 3, 4, 4X, 6, 6P, 12, 13
UL, CSA, CE
LSA, LSL, LSM, LSM, LSP, LSU
0,45 N m max.
4 in lb max.
LSH, LSR
0,19 N m max.
1.7 in lb max
½ in - 14 NPT
Electrical ratings A, B
Silver
Electrical rating C
Gold
Snap action contacts
DPDT

Side rotary, momentary action
The momentary action listings shown are factory
assembled with the head adjusted for both
clockwise (CW) and counterclockwise (CCW)
operation. The shaft of side rotary heads face the
front (label side of switch).
Actuation direction
A simple field adjustment converts switch to
accept actuation from one or both directions. For
ready reference, adjustment instructions are cast
into the internal lid of side rotary heads.

SPDT Double Break

DPDT Double Break

Head orientation
The head may be orientated and locked in any of
four 90° positions.

Momentary action switches can be factory
assembled for operation in one direction only and/
or with the shaft facing the rear or either side.
Contact Honeywell for more information.

46

www.honeywell.com/sensing

HEAVY DUTY LIMIT SWITCHES

OPTIONS
Low differential, low torque

Standard
Pretravel:
Differential travel:

SPDT
DPDT

Overtravel:

15° max.
5° max.
7° max.
60° min.

ELECTRICAL RATING REFERENCE
A
LSA1A
C
LSA1E
B
LSA2B
B
LSA6B
C
LSA6S
A
LS4A1A
B
LS4A2B

Non plug in
CONTACT CONDUIT
SPDT
DPDT
¾ in
SPDT
20 mm

Pretravel:
Differential travel:

SPDT
DPDT

Overtravel:

9° max.
3° max.
4° max.
66° min.

Plug in

Plug in
CONTACT CONDUIT
SPDT
SPDT
DPDT
¾ in
DPDT
DPDT
SPDT
20 mm
DPDT
20 mm

Side rotary, additional circuitry/
action

ELECTRICAL RATING REFERENCE
A
LSA3K
B
LSA4L
A
LS4A3K

CONTACT CONDUIT
SPDT
SPDT
DPDT
¾ in
DPDT
DPDT

ELECTRICAL RATING REFERENCE
A
LSH1A
C
LSH1E
B
LSH2B
B
LSH6B
C
LSH6S

Non plug in
CONTACT CONDUIT
SPDT
DPDT
¾ in

The following listings, sequential, centre neutral
and maintained switches, are assembled with the
operating shaft facing front. The user can position
and lock the head with the shaft to rear or either
side. They can also be factory assembled with the
shaft to rear or either side. Contact Honeywell for
more information.

OPTIONS
Sequential
One pole operates before the other in each
direction, with 10° lever travel between operations.
Pretravel:

ELECTRICAL RATING REFERENCE
A
LSH3K
B
LSH4L

Differential travel:
Overtravel:
Switching options:

1st pole 15° max.
2nd pole additional 10° max.
Each pole 5° max.
48° min.

5° Pretravel
Pretravel:
Differential travel:

Low differential travel
Pretravel:
Differential travel:

SPDT
DPDT

Overtravel:

9° max.
3° max.
4° max.
66° min.

Plug in
CONTACT
SPDT
SPDT
DPDT
DPDT
DPDT

ELECTRICAL RATING REFERENCE
A
LSP1A
C
LSP1E
B
LSP2B
B
LSP6B
C
LSP6S

5° max.
3° max.
4° max.
70° min.

Plug in
CONTACT CONDUIT
SPDT
SPDT
DPDT
¾ in
DPDT
DPDT

(2) SPDT Double Bread
with 10˚ between operation

ELECTRICAL RATING REFERENCE
A
LSU1A
C
LSU1E
B
LSU2B
B
LSU6B
C
LSU6S

Plug in
CONTACT CONDUIT
DPDT
¾ in
DPDT

ELECTRICAL RATING REFERENCE
B
LSL2C
B
LSL6C

Non plug in

Non plug in
CONTACT CONDUIT
SPDT
DPDT
¾ in

Non plug in
CONTACT CONDUIT
SPDT
DPDT
¾ in

Overtravel:

SPDT
DPDT

ELECTRICAL RATING REFERENCE
A
LSU3K
B
LSU4L

ELECTRICAL RATING REFERENCE
A
LSP3K
B
LSP4L

CONTACT CONDUIT
DPDT
¾ in
DPDT

ELECTRICAL RATING REFERENCE
B
LSL4M
B
LSL7M

Centre neutral
One pole operates on clockwise rotation, the other
on counterclockwise rotation.

Low torque
Pretravel:
Differential travel:
Overtravel:

SPDT
DPDT

Pretravel:
Differential travel:
Overtravel:
Switching options:

15° max.
5° max.
7° max.
60° min.

18° max.
10° max.
57° min.

Plug in
CONTACT CONDUIT
SPDT
SPDT
DPDT
¾ in
DPDT
DPDT

ELECTRICAL RATING REFERENCE
A
LSR1A
C
LSR1E
B
LSR2B
B
LSR6B
C
LSR6S

SPDT Double Break each direction

Plug in

Non plug in
CONTACT CONDUIT
SPDT
DPDT
¾ in

CONTACT CONDUIT
DPDT
¾ in
SPDT
20 mm
DPDT

ELECTRICAL RATING REFERENCE
A
LSR3K
B
LSR4L

ELECTRICAL RATING REFERENCE
B
LSM2D
B
LS4M2D
B
LSM6D

Non plug in
CONTACT CONDUIT
DPDT
¾ in
DPDT

www.honeywell.com/sensing

ELECTRICAL RATING REFERENCE
B
LSM4N
B
LSM7N

47

HEAVY DUTY LIMIT SWITCHES

HDLS Series
Side rotary actuated
switches (continued)

Plunger actuated switches

Maintained contact, 2 position
Operation is maintained on counterclockwise
rotation, reset on clockwise rotation and vice
versa.
Pretravel:
Differential travel:
Overtravel:
Switching options:
SPDT

65° max.
40° max.
20° min.
DPDT

HDLS plunger actuated switches are available with
either top or side facing plungers for application
flexibility. Switches with adjustable plungers
simplify installation. They have a hex setscrew
and locknut on the plunger, providing an
adjustment range of 0.25 in (6.35 mm).
Assembled conditions
The listing shown are factory assembled with side
plungers facing front (label side of switch); rollers
on side plungers are in horizontal position.
Rollers on top plunger switches are parallel to
mounting surface. Other options are available.
Contact Honeywell for more information.
Approvals:

SPDT Double Break
Maintained

DPDT Double Break
Maintained

NEMA 1, 3, 4, 4X, 6, 6P, 12, 13
UL, CSA, CE
½ in - 14 NPT

Conduit:
Contacts:
Electrical ratings A, B
Electrical rating C
Switching options:
SPDT

Silver
Gold
Snap action contacts
DPDT

Plug in
CONTACT
SPDT
DPDT

Operating point:

55,9 mm ± 1,02
2,20 in ± 0.040

Plug in
CONTACT
SPDT
SPDT
DPDT
DPDT

ELECTRICAL RATING REFERENCE
A
LSD1A
C
LSD1E
B
LSD6B
C
LSD6S

Non plug in
ELECTRICAL RATING REFERENCE
A
LSN1A
B
LSN6B

Non plug in
CONTACT
SPDT
DPDT

Top roller plunger

CONTACT
SPDT
DPDT

ELECTRICAL RATING REFERENCE
A
LSD3K
B
LSD7L

DPDT Double Break

SPDT Double Break

ELECTRICAL RATING REFERENCE
A
LSN3K
B
LSN7L

Adjustable plunger

Top plungers, momentary action
Pretravel:
Differential travel:
SPDT
DPDT
Overtravel:
Operating force:

1,78 mm (0.07 in) max.
0,38 mm (0.015 in) max.
0,51 mm (0.02 in) max.
4,83 mm (0.19 in) min.
17,8 N m (4 lb) max.

OPTIONS
Operating point:

Top pin plunger

53,0 mm to 59,3 mm
2.085 in to 2.335 in

Plug in
CONTACT
SPDT
SPDT
DPDT
DPDT

ELECTRICAL RATING REFERENCE
A
LSV1A
C
LSV1E
B
LSV6B
C
LSV6S

Non plug in
Operating point:

45,8 mm ± 0,76
1.805 in ± 0.030

Plug in
CONTACT
SPDT
SPDT
DPDT
DPDT

ELECTRICAL RATING REFERENCE
A
LSC1A
C
LSC1E
B
LSC6B
C
LSC6S

Non plug in
CONTACT
SPDT
DPDT

48

ELECTRICAL RATING REFERENCE
A
LSC3K
B
LSC7L

www.honeywell.com/sensing

CONTACT
SPDT
DPDT

ELECTRICAL RATING REFERENCE
A
LSV3K
B
LSV7L

HEAVY DUTY LIMIT SWITCHES

Side plungers, momentary action
Pretravel:
Differential travel:
SPDT
DPDT
Overtravel:
Operating force:

Adjustable side roller plunger

Side plunger, maintained circuitry

Operating point:

LSG contact transfer is maintained after either
plunger is operated. Operation of other plunger
resets switch.

2,54 mm (0.100 in) max.
0,64 mm (0.025 in) max.
0,89 mm (0.035 in) max.
4,83 mm (0.19 in) min.
26,7 N m (6 lb) max.

OPTIONS
Side pin plunger

41,0 mm to 47,4 mm
1.615 in to 1.865 in

Plug in
CONTACT
SPDT
SPDT
DPDT
DPDT

Operating point:

33 mm ± 0,76
1.300 in ± 0.030

Plug in
CONTACT
SPDT
SPDT
DPDT
DPDT

ELECTRICAL RATING REFERENCE
A
LSE1A
C
LSE1E
B
LSE6B
C
LSE6S

ELECTRICAL RATING REFERENCE
A
LSW1A
C
LSW1E
B
LSW6B
C
LSW6S

Non plug in
CONTACT
SPDT
DPDT

ELECTRICAL RATING REFERENCE
A
LSW3K
B
LSW7L

Pretravel:
Differential travel:
SPDT
DPDT
Overtravel:
Operating force:
Operating point:
Switching options:
SPDT

4,32 mm (0.170 in) max.
2,29 mm (0.090 in) max.
2,29 mm (0.090 in) max.
2,00 mm (0.0.80 in) max.
44,5 N m (10 lb) min.
37,6 ± 0,76 mm
1.48 ± 0.030 in
DPDT

Non plug in
CONTACT
SPDT
DPDT

ELECTRICAL RATING REFERENCE
A
LSE3K
B
LSE7L

Plug in
CONTACT
SPDT
SPDT
DPDT
DPDT

Side roller plunger

ELECTRICAL RATING REFERENCE
A
LSG1A
C
LSG1E
B
LSG6B
C
LSG6S

Non plug in
CONTACT
SPDT
DPDT

Operating point:

ELECTRICAL RATING REFERENCE
A
LSG3K
B
LSG7L

44,1 mm ± 1,02
1.735 in ± 0.040

Plug in
CONTACT
SPDT
SPDT
DPDT
DPDT

ELECTRICAL RATING REFERENCE
A
LSF1A
C
LSF1E
B
LSF6B
C
LSF6S

Non plug in
CONTACT
SPDT
DPDT

ELECTRICAL RATING REFERENCE
A
LSF3K
B
LSF7L

www.honeywell.com/sensing

49

HEAVY DUTY LIMIT SWITCHES

HDLS Series
Wobble actuated switches
Momentary action wobble actuated switches have
flexible levers which may be operated with any
movement, except direct pull.
Approvals:

Spring wire

Cat whisker

NEMA 1, 3, 4, 4X, 6, 6P, 12, 13
UL, CSA, CE
½ in - 14 NPT

Conduit:
Contacts:
Electrical ratings A, B
Switching options:
SPDT

Silver
Snap action contacts
DPDT

Pretravel (approx) (Radius):
Operating force:
SPDT Double Break

DPDT Double Break

Plastic rod

Pretravel (approx) (Radius):
51,0 mm (2.0 in)
Operating force:
1,39 N (5.0 oz) max.

Plug in
CONTACT
SPDT
DPDT

OPTIONS

102,0 mm (4.0 in)
1,39 g (5 oz) max.

ELECTRICAL RATING REFERENCE
A
LSJ1A-7M
B
LSJ6B-7M

CONTACT
SPDT
DPDT

Non plug in
CONTACT
SPDT
DPDT

Plug in

ELECTRICAL RATING REFERENCE
A
LSJ3K-7M
B
LSJ7L-7M

ELECTRICAL RATING
A
B

REFERENCE
LSK1A-8A
LSK6B-8A

ELECTRICAL RATING
A
B

REFERENCE
LSK3K-8A
LSK7L-8A

Non plug in
CONTACT
SPDT
DPDT

Cable
Coil spring

Pretravel (approx) (Radius):
25,4 mm (1.0 in)
Operating force:
2,78 g (10 oz) max.

Plug in
CONTACT
SPDT
DPDT

ELECTRICAL RATING REFERENCE
A
LSJ1A-7A
B
LSJ6B-7A

Pretravel (approx) (Radius):
38,0 mm (1.5 in)
Operating force:
1,95 N (7.0 oz) max.

Non plug in
CONTACT
SPDT
DPDT

ELECTRICAL RATING REFERENCE
A
LSJ3K-7A
B
LSJ7L-7A

Pretravel (approx) (Radius):
51,0 mm (2.0 in)
Operating force:
1,95 N (7.0 oz) max.

Plug in
CONTACT
SPDT
DPDT

ELECTRICAL RATING
A
B

REFERENCE
LSJ1A-7N
LSJ6B-7N

CONTACT
SPDT
DPDT

Non plug in
CONTACT
SPDT
DPDT

Plug in

ELECTRICAL RATING
A
B

REFERENCE
LSJ3K-7N
LSJ7L-7N

Non plug in
CONTACT
SPDT
DPDT

50

www.honeywell.com/sensing

ELECTRICAL RATING REFERENCE
A
LSK1A-8C
B
LSK6B-8C

ELECTRICAL RATING REFERENCE
A
LSK3K-8C
B
LSK7L-8C

HEAVY DUTY LIMIT SWITCHES

Fully potted HDLS
Fully potted HDLS are designed to meet the
demanding requirements of NEMA 1, 3, 4, 6, 6P
and 13 for wet applications where the integrity of
the conduit seal must be assured. These switches
are the same as the standard HDLS non plug in
limit switch except that the conduit entrance is
factory sealed to simplify installation and ensure
integrity of the conduit seal. They are epoxy filled
and supplied with six feet of 5 or 9 conductor 16
gauge STO cable. Fully potted HDLS are built with
all Fluorocarbon seals. Sealing exceeds Nema 6P.
Low temperature versions are available, see page
4 for temperature range and how to order.
41,1
1.62
14,7
0.58

Operating temperature:
Cable versions

-12 °C to 105 °C
10 °F to 221 °F
Connector versions
-12 °C to 121 °C
10 °F to 250 °F
Cable length:
3,658 m (12 ft)
Contacts:
Electrical ratings A, B
Silver
Switching options:
Snap action contacts
SPDT
DPDT

Side rotary actuated
switches
Levers: Levers for side rotary
types are ordered separately (see
pages 69-71 for details)

OPTIONS
Standard
Pretravel:
Differential travel:
Overtravel:
Operating force:

25,4
1.00 36,6
1.44

59,4
2.34

CONTACT
SPDT
DPDT
SPDT
DPDT

70,4
2.77

Wiring diagrams:

5,2
0.20 Ø Mtg holes
(2)

NEMA 1, 4, 6, 6P, 12, 13
NEMA 1, 4, 6, 6P, 12
UL, CSA, CE

39,6
1.56

19,0
0.75

106,7
4.20

Approvals:
Connector
Cable

29,4
1.16
10-32 UNF tapped
from rear only (2)

Single-Pole

ELECTRICAL RATING REFERENCE
A
LSYAC3KP-FP
B
LSYAC4LX-FP
A
LSYAC3KQ-FP
B
LSYAC7LR-FP

Numbers = Connectors
Colours = Cables
Double-Pole

Low differential travel
Pretravel:
Differential travel:

62,0
2.44

Overtravel:
Operating force:

Mtg pads

7,32
0.29

TERMINATION
Cable
Cable
5-pin Connector
9-pin Connector

15° max.
5° max.
7° max.
60° min.
0,45 N m (4 in lb) max.
SPDT
DPDT

Actuators
74,9
2.95

CONTACT
SPDT
DPDT
SPDT
DPDT

TERMINATION
Cable
Cable
5-pin Connector
9-pin Connector

9° max.
3° max.
4° max.
66° min.
0,45 N m (4 in lb) max.
SPDT
DPDT

ELECTRICAL RATING REFERENCE
A
LSYPC3KP-FP
B
LSYPC4LX-FP
A
LSYPC3KQ-FP
B
LSYPC7LR-FP

5° Pretravel

1/2-14 NPT
20,3
0.80

Pretravel:
Differential travel:
Overtravel:
Operating force:

39,0
1.54
44,4
1.75

5° max.
3° max.
70° min.
0,45 N m (4 in lb) max.
SPDT

CONTACT TERMINATION
ELECTRICAL RATING REFERENCE
SPDT
Cable
A
LSYUC3KP-FP
SPDT
5-pin Connector A
LSYUC3KQ-FP

For low temperature versions
substitute “Y_B” for “Y_C”

www.honeywell.com/sensing

51

HEAVY DUTY LIMIT SWITCHES

Fully potted HDLS
(continued)
Side rotary actuated
switches
Sequential
Pretravel:
Differential travel:
Overtravel:
Operating force:
Switching options:

1st pole 15° max.
2nd pole additional 10° max.
Each pole 5° max.
48° max.
0,45 N m (4 in lb) max.
DPDT

Plunger actuated switches
OPTIONS
Top plungers
Pretravel:
Differential travel:
SPDT
DPDT
Overtravel:
Operating force:

1,78 mm (0.07 in) max.
0,38 mm (0.015 in) max.
0,51 mm (0.02 in) max.
4,83 mm (0.19 in) min.
17,8 N m (4 lb) max.

Top pin plunger
CONTACT
SPDT
DPDT
SPDT
DPDT

TERMINATION
Cable
Cable
5-pin Connector
9-pin Connector

ELECTRICAL RATING REFERENCE
A
LSYCC3KP-FP
B
LSYCC4LX-FP
A
LSYCC3KQ-FP
B
LSYCC7LR-FP

(2) SPDT Double Break
with 10˚ between operation

CONTACT TERMINATION
ELECTRICAL RATING REFERENCE
DPDT
Cable
B
LSYLC4MX-FP
DPDT
9-pin Connector B
LSYLC7MR-FP

CONTACT
SPDT
DPDT
SPDT
DPDT

Centre neutral
Pretravel:
Differential travel:
Overtravel:
Operating force:
Switching options:

Top roller plunger

18° max.
10° max.
57° min.
0,45 N m (4 in lb) max.
DPDT

TERMINATION
Cable
Cable
5-pin Connector
9-pin Connector

ELECTRICAL RATING REFERENCE
A
LSYDC3KP-FP
B
LSYDC4LX-FP
A
LSYDC3KQ-FP
B
LSYDC7LR-FP

Side plungers
Pretravel:
Differential travel:
SPDT
DPDT
Overtravel:
Operating force:

2,54 mm (0.100 in) max.
0,38 mm (0.015 in) max.
0,51 mm (0.02 in) max.
4,83 mm (0.19 in) min.
26,7 N m (6 lb) max.

Side pin plunger
SPDT Double Break each direction
CONTACT TERMINATION
ELECTRICAL RATING REFERENCE
DPDT
Cable
B
LSYMC4NX-FP
DPDT
9-pin Connector B
LSYMC7NR-FP

CONTACT
SPDT
DPDT
SPDT
DPDT

TERMINATION
Cable
Cable
5-pin Connector
9-pin Connector

ELECTRICAL RATING REFERENCE
A
LSYEC3KP-FP
B
LSYEC4LX-FP
A
LSYEC3KQ-FP
B
LSYEC7LR-FP

For low temperature versions
substitute “Y_B” for “Y_C”

52

www.honeywell.com/sensing

Wobble actuated switches
Actuator codes **:
7A
7M
8A
7N
8C
CONTACT TERMINATION
SPDT
DPDT
SPDT
DPDT

Cable
Cable
5-pin Connector
9-pin Connector

Delrin rod
Spring wire
Cat whisker
Cable
Coil spring
ELECTRICAL
RATING
A
B
A
B

Head style*
J
J
K
J
K
REFERENCE
LSY*C3KP-**FP
LSY*C4LX-**FP
LSY*C3KQ-**FP
LSY*C7LR-**FP

HEAVY DUTY LIMIT SWITCHES

Stainless steel
HDLS

Side rotary actuated
switches

Plunger actuated switches
OPTIONS

HDLS stainless steel switches are designed for use
in highly corrosive environments such as petrochemical plants, food processing plants,
shipboard and dockside locations. The type 316
cast stainless steel body is designed to minimise
crevices where food particles could become
trapped. The actuator, operating head and screws
are also stainless steel. All seals are Fluorocarbon
to provide excellent chemical resistance and to
withstand operating temperatures up to 121 °C
(250 °F) and pressurised steam cleaning.

Top roller plunger

Approvals:

NEMA 1, 3, 3R, 4, 4X, 6, 6P, 12, 13
UL, CSA, CE
Operating temperature:
-12 °C to 121 °C
10 °F to 250 °F
Contacts:
Electrical ratings A, B
Silver

Pretravel:
Differential travel:
Overtravel:
Operating point:

Levers: Levers for side rotary
types are ordered separately (see
pages 69-71 for details)

CONTACT
SPDT
DPDT

Actuators

1,78 mm (0.07 in) max.
0,38 mm (0.015 in) max.
4,83 mm (019 in) min.
55,9 mm ± 1,02
2.20 in ± 0.04

ELECTRICAL RATING
A
B

REFERENCE
LS2D4K
LS2D4L

Side pin plunger
33,0
1.30
Operating
point

19,0
0.75

Standard
Pretravel:
Differential travel:

SPDT
DPDT

Overtravel:
CONTACT
SPDT
DPDT

9,4
0.37

Pretravel:
Differential travel:
Overtravel:
Operating point:

OPTIONS

ELECTRICAL RATING
A
B

15° max.
5° max.
7° max.
60° min

CONTACT
SPDT
DPDT

ELECTRICAL RATING
A
LS2E4K
B
LS2E4L

47,7
1.88
39,6
1.56

Overtravel:
CONTACT
SPDT
DPDT

ELECTRICAL RATING
A
B

9° max.
3° max.
4° max.
60° min.
REFERENCE
LS2H4K
LS2H4L

Pretravel:
Differential travel:
Overtravel:
CONTACT
DPDT

ELECTRICAL RATING
B

19,1
0.75

Pretravel:
Differential travel:
Overtravel:
Operating point:
CONTACT
SPDT
DPDT

Centre neutral
DPDT

REFERENCE

44,2
1.74
Operating
point

14,7
0.58

Low Torque
SPDT
DPDT

2,54 mm (1.00 in) max.
0,64 mm (0.025 in) max.
4,83 mm (0.19 in) min.
33 mm ± 0,76
1.3 in ± 0.03

Side roller plunger

REFERENCE
LS2A4K
LS2A4L
4,8
0.19

Pretravel:
Differential travel:

21,6
0.85

31,5
1.24

21,6
0.85

20,3
0.80

2,54 mm (1.00 in) max.
0,64 mm (0.025 in) max.
4,83 mm (0.19 in) min.
44,1 mm ± 1,02
1.73 in ± 0.04

ELECTRICAL RATING
A
B

REFERENCE
LS2F4K
LS2F4L

18° max
10° max.
57° min.
REFERENCE
LS2M4N

www.honeywell.com/sensing

53

Blank page

54

www.honeywell.com/sensing

EXPLOSION PROOF SWITCHES

Explosion proof switches
Honeywell explosion proof switches are designed specifically for use in
hazardous locations. To comply with explosion proof requirements, the flame
path within the housing is designed to contain and cool the escaping hot
gases that otherwise could cause an explosion outside the switch.
Switches are available with UL/CSA for North America. See information below
and product pages for details. In Europe, the usage is governed under the
European Directive on Equipment and Protective Systems Intended for Use in
Potentially Explosive Atmospheres (94/9/EC) commonly referred to as the
ATEX Directive.
The BX, CX and GXE product families comply to the following ATEX Directive:
EExd IIC T6 Category II 2 GD
The 14CE100 product family complies to the following ATEX Directive:
EExd IIC T6 Category II 2 G
NEMA TYPE 7, CLASS I FLAMMABLE GASES OR VAPORS
Type 7 enclosures are for use indoors in locations classified as Class I,
Groups B, C, or D by the National Electrical Code.
Group B — (only switches so noted in the order guides include this listing).
Atmospheres containing hydrogen or manufactured gas.
Group C — atmospheres containing diethyl ether, ethylene, or cyclopropane.
Group D — Atmospheres containing gasoline, hexane, butane, naptha,
propane, acetone, toluene or isoprene.
Division 1
Locations in which hazardous agents are present under normal operating
conditions.
Division 2
Locations in which hazardous agents may be present only in case of
accidental rupture or breakdown.
All Honeywell listings covered in Division 1 are also covered in the same
groups in Division 2.
NEMA TYPE 9, CLASS II COMBUSTIBLE DUSTS
Type 9 enclosures are for use in indoor locations classified as Class II,
Groups E, F or G, as defined in the National Electrical Code.
Group E — Atmospheres containing metal dust.
Group F — Atmospheres containing carbon black, coal dust or coke dust.
Group G — Atmospheres containing flour, starch or grain dust.
ATEX EExd
EExd
Flameproof
enclosure

II

c

T6

Category II 2

Places with potentially
explosive
atmospheres, other
than mines susceptible
to fire damp

Atmosphere may
contain gases
from groups A, B
or C from table in
EN50014, Annex A

Maximum
surface
temperature of
85 °C (185 °F)

Areas in which an explosion
proof atmosphere is likely to
occur

www.honeywell.com/sensing

G
Gas
could be
present

D
Dust
could be
present

55

EXPLOSION PROOF SWITCHES

14CE100 Series
Miniature Enclosed,
Explosion Proof
Switches

The 14CE100 Series has been designed for use in explosive environments. It is approved to meet the
requirements of the Low Voltage directive and is CE marked. The prewired construction allows for ease of
installation where space is at a premium and external operating conditions can be difficult.
Mechanical life:
Sealing:

10 million
IP65, NEMA 1, 3
IP67 , NEMA 1, 3, 4 12, 13
0 °C to 70 °C (32 °F to 158 °F)
CE, PTB 98 ATEX 1064 X EExd IIC T6 Category II 2 G
AC14 D300
DC13 R300
11,8 N max.
1,8 mm (0.71 in) max.
3,0 mm (0.118 in) min.
0,1mm (0.004 in) max.
Standard
Silver
-*G
Gold
Harmonised CENELEC 4 x 0,75 mm2 cable

Standard
Boot sealed

Operating temperature:
Approvals:

Operating force (OF):
Pretravel (PT):
Overtravel (OT):
Differential travel (DT):
Contacts:
Connection:
Switching options:
SPDT

Single Pole, Double Throw
Snap action contacts (1NC/1NO)

Actuators

S.P.D.T
BROWN
2

GREEN/YELLOW
BLUE
1

3
BLACK

Top pin plunger
40,0 Max.
1,57
25,0
1.00

M4 ground
screw

15,7 OP
0.62

Top roller plunger, parallel

16,0 Max.
0.63

1,8 PT
0.07

M4 ground
screw

Top roller plunger, perpendicular

40,0 Max.
1,57
25,0
1.00

M4 ground
screw

Ø 10,0 (0.39)
Stainless steel
plunger
(2) Ø 5,1 (0.20)
Mounting holes

49,0 Max.
1.93
31,4
1.24

1,8 PT
0.07

Ø 12,0 (0.47) x 5,0 (0.20)
Hardened steel roller

REFERENCE
14CE101-1
14CE101-2
14CE101-3
14CE101-4
14CE101-5
14CE101-6
14CE101-10

Boot sealed
1,80 Max.
(0.07) PT

72,0
2,83
31,4
1.24

49,0 Max.
1.93

CABLE LENGTH
1 m (3.3 ft)
3 m (9.9 ft)
3 m (9.9 ft)
Gold contacts
5 m (16.5 ft)
6 m (19.8 ft)
6 m (19.8 ft)
Gold contacts
8 m (26.4 ft)
12 m (39.6 ft)
15 m (49.5 ft)

31,4
1.24

49,0 Max.
1.93
7,6
0.30

"L"

REFERENCE
14CE102-1
14CE102-3
14CE102-3G
14CE102-5
14CE102-6
14CE102-6G
14CE102-8
14CE102-12
14CE102-15

Ø 7,1 (0.28)
Stainless steel
plunger
Neoprene boot seal

56

14,0
0.55

72,0
2,83

7,6
0.30

24,9
(0.98)
OP

CABLE LENGTH
1 m (3.3 ft)
6 m (19.8 ft)
10 m (33.0 ft)

(2) Ø 5,1 (0.20)
Mounting holes

28,5 OP
1.11

"L"

CABLE LENGTH
1 m (3.3 ft)
2 m (6.6 ft)
3 m (9.9 ft)
4 m (13.2 ft)
5 m (16.5 ft)
6 m (19.8 ft)
10 m (33.0 ft)

1,8 PT
0.07

(2) Ø 5,1 (0.20)
Mounting holes

7,6
0.30

"L"

16,0 Max.
0.63

16,0 Max.
0.63

28,5 OP
1.11

59,0
2.32

40,0 Max.
1,57
25,0
1.00

REFERENCE
14CE118-1
14CE118-6
14CE118-10

www.honeywell.com/sensing

CABLE LENGTH
1 m (3.3 ft)
3 m (9.9 ft)

REFERENCE
14CE103-1
14CE103-3

EXPLOSION PROOF SWITCHES

GXE Series
Explosion Proof
Limit Switches

The GXE Series explosion proof limit switches are designed specifically for use in hazardous applications.
The GXE enclosure is fully potted and has sealing protection of IP66/67 as per IEC/EN 60529. The entire
GXE Series complies with the European Directive on Equipment and Protective Systems Intended for Use
in Potentially Explosive Atmospheres (94/9/EC) commonly referred to as the ATEX Directive.
Mechanical life:
Sealing:
Operating temperature:
Approvals:

2 million
IP66/67, EN 60529
-20 °C to 75 °C (-4 °F to 167 °F)
CE, EN 50014, EN 50018, EN 50281-1-1
KEMA 00 ATEX 2103 X EExd IIC T6 Category II 2 GD
AC15
DC13
Silver
5 metre, HO5VV-F, 3 x 0,75 mm2 cable

Contacts:
Connection:
Switching options:
SPDT

Single Pole, Double Throw
Snap action contacts (1NC/1NO)
BLUE
BLACK
BROWN

Actuators

OPTIONS

GXE Series

Side rotary roller lever

Top roller plunger, parallel

Overtravel min. (OT):
6,0 mm (0.0.236 in)
Differential travel max. (DT): 0,5mm (0.020 in)
Operating position max. (PT): 2,0 mm (0.079 in)
Overtravel min. (OT):
6,0 mm (0.0.236 in)
Differential travel max. (DT):
8°
Operating position max. (PT):
26

REFERENCE
GXE51C

REFERENCE
GXE51A1B

Operating force max. (OF):

16 N (3.6 lb)

Top pin plunger

Overtravel min. (OT):
6,0 mm (0.0.236 in)
Differential travel max. (DT): 0,5mm (0.020 in)
Operating position max. (PT): 2,0 mm (0.079 in)
REFERENCE
GXE51B

www.honeywell.com/sensing

57

EXPLOSION PROOF SWITCHES
The EX Series features the smallest UL listed housings available for use in
hazardous locations. Flame paths within the housing cool exploding gases
below the kindling temperature before they reach the explosive gases
surrounding the housing.

EX Series
Standard
Explosion
Proof
Switches

Options available include single or double conduit connection.
These switches are not sealed against liquids and should not be used where
there will be liquid splash. If a weather sealed explosion proof switch is
required please select from the CX or LSX/BX series.

Actuators

Sealing:
Operating temperature:
Approvals:
Conduit:
Contacts:
Electrical ratings:
A

NEMA 1, 7 (Class I, Division I, Groups C, D)
9, (Class II, Division I, Groups E, F, G)
Standard
-40 °C to 71 °C (-40 °F to 160 °F)
High
100 hr @ 400 °F
UL, CSA
½ in - 14NPT
Silver

UL/CSA Rating:

15 A, 125, 250 or 480 Vac;
/8 Hp, 125 Vac; ¼ Hp, 250 Vac;
½ A, 125 Vdc; ¼ A, 250 Vdc.

1

B

UL/CSA Rating:

20 A, 125, 250 or 480 Vac;
10 A, 125 Vac “L”;
1 Hp, 125 Vac; 2 Hp, 250 Vac;
½ A, 125 Vdc; ¼ A, 250 Vdc.

C

UL/CSA Rating:

D

UL/CSA Rating:

10 A, 125 or 250 Vac;
0.3 A, 125 Vdc; 0.15 A, 250 Vdc
.
10 A, 125, 250 or 480 Vac;
½ A, 125 Vdc; ¼ A, 250 Vdc.

E

UL Rating:

Switching options:
SPDT
Single Pole, Double Throw
Snap action contacts (1NC/1NO)

1 A, 125 Vac.

DPDT
Double Pole, Double Throw
Snap action contacts (2NC/2NO)

Side rotary actuated switches
OPTIONS
No lever
Note: Levers are ordered separately (see pages 69-71
for details)

Operating force max. (OF):
Electrical rating A
Electrical rating B
Pretravel max. (PT):
Overtravel max. (OT):
Electrical rating A
Electrical rating B
Differential travel max. (DT):
Electrical rating A
Electrical rating B
ACTUATION
CW
CCW
CW

58

www.honeywell.com/sensing

CONTACT
SPDT
SPDT
SPDT

0,22 N m (31.25 in oz)
3,34 N to 8,90 N (0.75 lb to 2.0 lb)
5,56 mm (0.219 in) 8°
90°
25°
0,18 mm (0.007 in) 0.25°
0,3 mm (0.012 in) 4°
ELECTRICAL RATING
A
A
B

REFERENCE
EX-AR20
EX-AR230
EXA-AR20

EXPLOSION PROOF SWITCHES
Roller lever

DPDT, Preleaded with 0,91 m (3 ft) leadwire
Operating force max. (OF):
Clockwise (CW)
Counter clockwise (CCW)
Pretravel max. (PT):
Overtravel max. (OT):
Differential travel max. (DT):
Sealing:
ACTUATION
CW
CCW

Roller material:
Operating force max. (OF):
Electrical rating A
Clockwise (CW)
Counter clockwise (CCW)
Electrical rating B
Pretravel max. (PT):
Electrical rating A, B
Clockwise (CW)
Counter clockwise (CCW)
Overtravel max. (OT):
Electrical rating A
Clockwise (CW)
Counter clockwise (CCW)
Electrical rating B
Differential travel max. (DT):
Electrical rating A
Electrical rating B
ACTUATION
CW
CCW
CW/Class 1 Group B
CCW/Class 1 Group B
CW/High temperature
CW
CW/No mounting bracket
CW/Nylon roller
CW/No mounting bracket

CONTACT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT

CONTACT
DPDT
DPDT

2,22 N to 6,67 N (0.5 lb to 1.5 lb)
12,2 N (2.75 lb)
6,35 mm (0.250 in)
25°
2,77 mm (0.109 in) 4°
NEMA Class 1 Group B
ELECTRICAL RATING
C
C

REFERENCE
EXD-AR-3
EXD-AR30-3

Bronze

Hermetically sealed
2,22 N to 5,56 N (0.5 lb to 1.25 lb)
11,1 N (2.5 lb)
3,34 N to 8,90 N (0.75 lb to 2.0 lb)

5,56 mm (0.219 in) 8°
1,65 mm (0.065 in) 3.5°

90°
25°
25°

Operating force max. (OF):
Clockwise (CW)
Counter clockwise (CCW)
Pretravel max. (PT):
Clockwise (CW)
Counter clockwise (CCW)
Overtravel max. (OT):
Differential travel max. (DT):
Sealing:
ACTUATION
CW/3,2 m (10.5 ft) leadwire
CCW/0,91 m (3 ft) leadwire
CW/0,91 m (3 ft) leadwire

CONTACT
SPDT
SPDT
SPDT

2,22 N to 6,67 N (0.5 lb to 1.5 lb)
11,1 N (2.5 lb)
5,56 mm (0.219 in) 8°
1,65 N (0.065 in) 3.5°
25°
0,64 mm (0.025 in)
NEMA Class 1 Group B
ELECTRICAL RATING
E
E
E

REFERENCE
EXH-AR3
EXH-AR33
EXH-AR7

0,18 mm (0.007 in) 0.25°
0,3 mm (0.012 in) 4°
ELECTRICAL RATING
A
A
A
A
A
B
B
A
A

REFERENCE
EX-AR
EX-AR30
EX-AR800
EX-AR830
EX-AR400
EXA-AR
EXA-AR62
EX-AR182
EX-AR141

2 Conduit openings

CW or CCW actuation, no return spring, low operating
force
Operating force max. (OF):
ACTUATION
CW/CCW/No mounting bracket

CONTACT
SPDT

0,56 N (2 oz)
ELECTRICAL RATING
A

REFERENCE
EX-AR16

Maintained contact
Operating force max. (OF):
Pretravel max. (PT):
Overtravel max. (OT):
ACTUATION
CW

CONTACT
SPDT

3,34 N (0.75 lb)
5,56 mm (0.219 in) 8°
90°
ELECTRICAL RATING
A

REFERENCE
EX-XR3

Operating force max. (OF):
Electrical rating A
Electrical rating B
Electrical rating C
Pretravel max. (PT):
Electrical rating A, B
Electrical rating C
Overtravel max. (OT):
Electrical rating A
Electrical rating B, C
Differential travel max. (DT):
Electrical rating A
Electrical rating B
Electrical rating C
CONTACT
DPDT
SPDT
SPDT

www.honeywell.com/sensing

2,22 N to 5,56 N (0.5 lb to 1.25 lb)
3,61 N to 8,90 N (0.8 lb to 2 lb)
2,22 N to 6,67 N (0.5 lb to 1.5 lb)
5,56 mm (0.219 in) 8°
6,35 mm (0.250 in)
90°
25°
0,18 mm (0.007 in) 0.25°
0,3 mm (0.012 in) 0.5°
2,77 mm (0.109 in) 4°
ELECTRICAL RATING
C
B
A

REFERENCE
4EX1-3
2EX1
1EX1

59

EXPLOSION PROOF SWITCHES

EX Series
Side rotary actuated switches (continued)

Overtravel plunger actuated switches

Cross roller lever, rotated 90°

Top pin plunger

Operating force max. (OF):
Pretravel max. (PT):
Overtravel max. (OT
Differential travel max. (DT):
CW

CONTACT
SPDT

2,22 N to 5,56 N (0.5 lb to 1.25 lb)
5,56 mm (0.219 in) 8°
90°
0,18 mm (0.007 in) 0.25°
ELECTRICAL RATING
A

REFERENCE
EX-CR

Rod lever

OPTIONS

Operating force max. (OF):
Electrical rating A, C
Electrical rating B
Pretravel max. (PT):
Electrical rating A
Electrical rating B
Electrical rating C
Overtravel min. (OT):
Electrical rating A
Electrical rating B
Electrical rating C
Differential travel max. (DT):
Electrical rating A
Electrical rating B
Electrical rating C

No mounting bracket
High temperature
Low OF

Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
CW/No mounting bracket

60

CONTACT
SPDT

0,56 N (2 oz)
18°
40°
ELECTRICAL RATING
A

REFERENCE
EX-AR1613

13,34 N (3.0 lb)
8,90 N (2 lb)
1,98 mm (0.078 in)
1,27 mm (0.050 in)
3,96 mm (0.156 in)
4,78 mm (0.188 in)
3,18 mm (0.125 in)
3,48 mm (0.141 in)
0,10 mm (0.004 in)
0,23 mm (0.009 in)
1,52 mm (0.060 in)
CONTACT
SPDT
SPDT
SPDT
SPDT

ELECTRICAL RATING
A
A
A
B

REFERENCE
EX-Q
EX-Q62
EX-Q400
EXA-Q

Sealing NEMA Class 1 Group B
Preleaded with 0,91 m (3 ft) leadwire

www.honeywell.com/sensing

CONTACT
SPDT
DPDT

ELECTRICAL RATING
A
C

REFERENCE
EX-Q800
EXD-Q-3

EXPLOSION PROOF SWITCHES

Boot sealed

Operating force max. (OF):
Electrical rating D
Electrical rating B
Pretravel max. (PT):
Electrical rating D
Electrical rating B
Overtravel min. (OT):
Electrical rating D
Electrical rating B
Differential travel max. (DT):
Electrical rating D
Electrical rating B

Class 1 Group B

CONTACT
SPDT
SPDT

13,34 N (3.0 lb)
15,57 N (3.5 lb)
1,98 mm (0.078 in)
2,77 mm (0.109 in)
4,78 mm (0.188 in)
3,18 mm (0.125 in)
0,10 mm (0.004 in)
0,23 mm (0.009 in)
ELECTRICAL RATING
D
B

REFERENCE
EX-N15
EXA-N

ELECTRICAL RATING
A

REFERENCE
EX-AR50

Manually actuated

Operating force max. (OF):
CONTACT
SPDT

11,1 N (2.5 lb)

www.honeywell.com/sensing

61

EXPLOSION PROOF SWITCHES

CX Series
Weather Sealed
Explosion Proof
Switches

CX switches, as are the LSX/BX Series, are built especially for outdoor use in hazardous atmospheres.
These enclosures are constructed to withstand the pressure of an internal explosion.
O-ring seals make the enclosure weatherproof but are outside of required flame paths so explosion proof
requirements are maintained.
As factory assembled, all basic switches operate on clockwise and counterclockwise rotation. The
actuating mechanism can be field adjusted for CW or CCW operation only.
Analog output, 4 mA to 20 mA, is available.
Basic switches operate nearly simultaneously in multiple switch devices.
Shafts of devices without shaft restoring force can be rotated through 360°.
Sealing:
NEMA
UL listed

1, 3, 4, 4X, 6, 6P, 7, 9 and 13
Class I, Div. 1, Groups B (16CX, 24CX, 26CX, and 84CX only),
C and D; and Class II, Div. 1, Groups E, F and G
Class I, Div. 1, Groups B (16CX, 24CX, 26CX, and 84CX only),
C and D; and Class II, Groups E, F and G
–25 °C to 85 °C (–13 °F to 185 °F)
UL, CSA
CX-E only
ATEX EExd IIC T6 Category II 2 GD
Aluminium
80CX
Bronze
¾ in - 14NPT
A, C, D
Silver
F
Gold

CSA certified
Operating temperature:
Approvals:
Housing:
Conduit:
Contacts:

Actuators

Electrical Ratings:
A

UL/CSA Rating: L96

15 A, 120, 240 or 480 Vac, ind. and res
1
/8 Hp, 120 Vac; ¼ Hp, 240 Vac
0.5 A, 125 Vdc, 0.25 A, 250 Vdc, res

C

UL/CSA Rating: L59

10 A, 120 or 240 Vax, ind. and res
0.3 A, 125 Vdc, 0.15 A, 250 Vdc, res

D

UL/CSA Rating: L22

1 A, 120 Vax, ind. and res

F

UL/CSA Rating: L22

1 A, 125 Vac

G

Analog Current Output (4 mA to 20 mA)

12.5 Vdc to 40 Vdc

Switching options:
SPDT
Single Pole, Double Throw
Snap action contacts (1NC/1NO)

DPDT
Double Pole, Double Throw
Snap action contacts (2NC/2NO)

Analog position sensing specifications (Electrical rating “G”)
Current output:
Voltage compliance range:
Maximum load resistance:
Current signal output:
Span:
Null:

62

www.honeywell.com/sensing

4 mA to 20 mA
12.5 Vdc to 40 Vdc
RL, Max., –V Supply - 12.5
20 mA
4 mA to 20 mA
Adjustable from 15° to 90° of angular rotation
4 mA position may be set at any angular position

EXPLOSION PROOF SWITCHES
Operating characteristics
Basic Switch Type
BZ
BA
DT
Pretravel (max.)*
15°
15°
30°
Differential Travel (max.)
10°
10°
25°
Overtravel (min.)*
90°
90°
75°
Operating Torque (max.)
11.1 in lb/1,25 N m
* May be modified in field to suit application requirements.

HS
30°
20°
75°

Note: Levers are ordered separately (see pages 6971 for details)

Notes:
Add the letter “A” to listings with side mounting holes tapped 5/16 (8).
Example: 11CX2A
Add the letter “B” to listings with thru mounting holes tapped 3/8-24 (4).
Example: 11CX2B
Add the letter “C” to listings for low temperature (-40 °C/°F) applications.
Example: 11CX2C
Add “D01” to specify a “direct-couple” listing with 3/8 in. dia by 3/4 in. long
flatted shaft.
Example: 11CX2-D01
Add the letter “E” to listings for European Atex approvals.
Example: 11CX2E
For Replacement Basic Switch Assemblies, change the first number in the
listing to “9”.
Example: 11CX2 becomes 91CX2

Short housing

OPTIONS
HOUSING
SIZE
Short
Short
Short
Short
Short
Short
Standard
Standard

BASIC
SWITCHES
BZ (2)
BZ (2)
BZ (2)
BZ (2)
BZ (2)
BZ (2)
BZ (4)
BZ (4)

CONTACT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT

ELECTRICAL
RATING
A
A
A
A
F
F
A
A

SHAFT RESTORING
FORCE TO CENTRE
With
Without
With
Without
With
Without
With
Without

REFERENCE
11CX2
11CX12
11CX2E
11CX12E
1172CX2
1172CX12
21CX4
21CX14

UL listed for Class I, Group B (hydrogen atmospheres)
Standard housing

HOUSING
SIZE
Standard
Standard
Short
Short
Standard

BASIC
SWITCHES
DT (2)
DT (2)
HS (2)
HS (2)
HS (4)

CONTACT
DPDT
DPDT
SPDT
SPDT
SPDT

ELECTRICAL
RATING
C
C
D
D
D

SHAFT RESTORING
FORCE TO CENTRE
With
Without
With
Without
With

REFERENCE
24CX2
24CX12
16CX2
16CX12
26CX4

Analog output, 4 mA to 20 mA
HOUSING
SIZE
Short
Short
Short
Standard
Standard

BASIC
SWITCHES
None
None
None
BZ (2)
BZ (2)

CONTACT
N/A
N/A
N/A
SPDT
SPDT

ELECTRICAL
RATING
G
G
G
A, G
A, G

SHAFT RESTORING
FORCE TO CENTRE
With
Without
Without
With
Without

REFERENCE
18CX0
18CX10
18CX10E
281CX2
281CX12

Bronze housing for use in corrosive
environments
80CX switches have rugged bronze housings which are resistant to salt water
and other corrosive environments. They comply with the NEMA 4X
requirement for protection against corrosion, in addition to NEMA enclosure
standards met by other CX switches. O-ring seals make the enclosure weatherproof, but are outside of required flame paths, maintaining explosion-proof
requirements.
HOUSING
SIZE
Standard
Standard
Standard
Standard

BASIC
SWITCHES
BZ (2)
BZ (4)
BZ (4)
DT (2)

www.honeywell.com/sensing

CONTACT
SPDT
SPDT
SPDT
DPDT

ELECTRICAL
RATING
A
A
A
C

SHAFT RESTORING
FORCE TO CENTRE
With
With
Without
With

REFERENCE
81CX2
81CX4
81CX14
84CX2

63

EXPLOSION PROOF SWITCHES
LSX/BX Series weather sealed, explosion proof limit switches are for use either
indoor or outdoors in hazardous atmospheres. They are completely sealed
and designed for use in explosive gas/dust environments.

LSX/BX Series
Weather sealed
explosion proof
switches

LSX/BX products meet the sealing standards of NEMA 1, 3, 4, 6, 7, 9 and 13.
BX products are also sealed to IP67 standard and are ATEX approved (see
specifications below).
All heads are field adjustable at 90° increments. Heads with side rotary
actuators can be adjusted for clockwise and counter clockwise operation.

Actuators

Sealing:
LSX

NEMA 1, 3, 4, 6, 7 (Class 1, Division 1, Groups B, C, D),
9 (Class 2, Division 1, Groups E, F, G), 13
IP67, NEMA 1, 3, 4, 6, 13

Rotary actuated switches

BX
Approvals:
LSX/BX
UL, CSA*
BX only
EExd IIC T6 category II 2 GD, SIRA 00ATEX 1037X
Contacts:
Electrical ratings A, B
Silver
Electrical rating C
Gold
Switching options:
SPDT
DPDT
Single Pole, Double Throw
Double Pole, Double Throw
Snap action contacts (1NC/1NO)
Snap action contacts (2NC/2NO)

Operating torque max.:

Standard
Low
Standard
Low
Standard
Low

0,45 N m (4.0 in lb)
0,19 Nm (1.7 in lb)
15°
9°
60°
66°

Differential travel max. (DT):
Standard SPDT
Standard DPDT
Low SPDT
Low DPDT

5°
7°
3°
4°

Pretravel max. (PT):

SPDT Double Break

DPDT Double Break

Overtravel min. (OT):
* Applies only to listings with ½ in NPT or ¾ in NPT

Electrical ratings
10 amps continuous carry. Circuits on any one pole must be the same polarity.
ac Volts
Pilot duty: 600 Vac, 720 VA

A
SPDT
NEMA
A600
B
DPDT
NEMA
B600
C
SPDT/DPDT

Amps at 0.35 Power Factor
Vac
Make
Break
120
60
6
240
30
3
480
15
1.5
600
12
1.2
120
30
3
240
15
1.5
480
7.5
0.75
600
6
0.60
250 Vac or 60 Vdc, 0.050 amp max.

Note: Levers are ordered separately (see pages 6971 for details)

dc Volts
Pilot duty: 240 Vdc, 30 watts

A
SPDT
B
DPDT
C
SPDT/DPDT

64

Make and Break Amps
Vdc
Inductive
Resistive
120
0.25
0.8
240
0.15
0.4
120
0.25
0.8
240
0.15
0.4
250 Vac or 60 Vdc, 0.050 amp max.

www.honeywell.com/sensing

EXPLOSION PROOF SWITCHES
OPTIONS
Maintained contact

Side rotary

Operating torque max.:
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):

SPDT
DPDT

Operating temperature:

0,45 N m (4.0 in lb)
65°
20°
30°
35°
-1 °C to 121 °C (30 °F to 250 °F)

LSX
Operating temperature:

-12 °C to 121 °C (10 °F to 250 °F)

LSX

Low DT

CONTACT
SPDT
SPDT
SPDT
SPDT
DPDT
DPDT
DPDT
SPDT

CONDUIT
½ in - 14NPT
20 mm
¾ in - 14NPT
½ in - 14NPT
¾ in - 14NPT
20 mm
½ in - 14NPT
½ in - 14NPT

ELECTRICAL RATING
A
A
A
C
B
B
B
A

REFERENCE
LSXA3K
LSX4A3K
LSXA4K
LSXA3E
LSXA4L
LSX4A4L
LSXA7L
LSXP3K

Maintained
Maintained
Maintained

CONTACT
SPDT
DPDT
DPDT

CONDUIT
½ in - 14NPT
¾ in - 14NPT
½ in - 14NPT

ELECTRICAL RATING
A
B
B

REFERENCE
LSXN3K
LSXN4L
LSXN7L

CONTACT
SPDT
DPDT

CONDUIT
½ in - 14NPT
¾ in - 14NPT

ELECTRICAL RATING
A
B

REFERENCE
BXN3K
BXN4L

BX
Maintained
Maintained

Top rotary

BX
CONTACT
SPDT
SPDT
DPDT

CONDUIT
½ in - 14NPT
20 mm
¾ in - 14NPT

Operating temperature:

ELECTRICAL RATING
A
A
B

REFERENCE
BXA3K
BX4A3K
BXA4L

-1 °C to 121 °C (30 °F to 250 °F)

LSX
Low
Low
Low
Low

DT/Low torque
DT/Low torque
torque
torque

CONTACT
SPDT
DPDT
SPDT
DPDT

CONDUIT
½ in - 14NPT
¾ in - 14NPT
½ in - 14NPT
¾ in - 14NPT

ELECTRICAL RATING
A
B
A
B

REFERENCE
LSXH3K
LSXH4L
LSXR3K
LSXR4L

BX
Low torque
Low torque
Low torque

CONTACT
SPDT
SPDT
DPDT

CONDUIT
½ in - 14NPT
½ in - 14NPT
¾ in - 14NPT

ELECTRICAL RATING
A
C
C

REFERENCE
BXR3K
BXR3E
BXR4S

Operating torque max.:
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):

SPDT
DPDT

Operating temperature:
CONTACT
SPDT
DPDT

CONDUIT
½ in - 14NPT
¾ in - 14NPT

0,28 N m (2.5 in lb)
25°
100°
10°
12°
-1 °C to 121 °C (30 °F to 250 °F)
ELECTRICAL RATING
A
B

REFERENCE
LSXB3K
LSXB4L

Centre neutral
Operating torque max. :
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
Operating temperature:
CONTACT
DPDT
DPDT

CONDUIT
¾ in - 14NPT
20 mm

0,45 N m (4.0 in lb)
18°
57°
10°
-1 °C to 121 °C (30 °F to 250 °F)
ELECTRICAL RATING
B
B

REFERENCE
LSXM4N
LSX4M4N

www.honeywell.com/sensing

65

EXPLOSION PROOF SWITCHES

LSX/BX Series (continued)
Plunger actuated switches
Top plungers
Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
SPDT
DPDT
Operating temperature:

17,79 N (4 lb)
1,78 mm (0.07 in)
4,83 mm (0.19 in)
0,38 mm (0.015 in)
0,51 mm (0.02 in)
-12 °C to 93 °C (10 °F to 200 °F)

OPTIONS
Top roller plunger

Top pin plunger

Head can be set at 90° increments for cam or slide actuation

Operating point:

58,5 mm ± 0,76 mm
(2.305 in ± 0.03 in)

LSX
CONTACT
SPDT
SPDT
DPDT

CONDUIT
½ in - 14NPT
20 mm
¾ in - 14NPT

ELECTRICAL RATING
A
A
B

REFERENCE
LSXC3K
LSX4C3K
LSXC4L

CONDUIT
20 mm
¾ in - 14NPT
20 mm

ELECTRICAL RATING
A
B
B

REFERENCE
BX4C3K
BXC4L
BX4C4L

CONTACT
SPDT
SPDT
DPDT

CONDUIT
½ in - 14NPT
20 mm
¾ in - 14NPT

ELECTRICAL RATING
A
A
B

REFERENCE
LSXD3K
LSX4D3K
LSXD4L

CONDUIT
20 mm

ELECTRICAL RATING
A

REFERENCE
BX4D3K

BX
CONTACT
SPDT

Top pin plunger, adjustable
7,9
(0.31)

21,6
(0.85)

Min.
operating point
Max.
65,7
operating point (2,59)
72,0
(2,83)

Operating point:
CONTACT
SPDT

66

CONDUIT
½ in - 14NPT

65,66 mm to 72,01 mm
(2.585 in to 2.835 in)
ELECTRICAL RATING
A

68,6 mm ± 1.00 mm
(2.700 in ± 0.04 in)

LSX

BX
CONTACT
SPDT
DPDT
DPDT

Operating point:

REFERENCE
LSXV3K

www.honeywell.com/sensing

EXPLOSION PROOF SWITCHES

Wobble actuated switches
OPTIONS
Side plungers

Plastic rod

Operating force max. (OF):
Pretravel max. (PT):
Overtravel min. (OT):
Differential travel max. (DT):
Operating temperature:

26,69 N (6 lb)
2,54 mm (0.10 in)
4,83 mm (0.19 in)
1,14 mm (0.045)
-12 °C to 93 °C
(10 °F to 200 °F)

OPTIONS
Side pin plunger

Operating point:
CONTACT
SPDT
DPDT

CONDUIT
½ in - 14NPT
¾ in - 14NPT

33,0 mm (1.30 in)
ELECTRICAL RATING
A
B

REFERENCE
LSXE3K
LSXE4L

Operating force max. (OF):
Pretravel max. (PT):
Operating temperature:
CONTACT
SPDT
DPDT

Side roller plunger

CONDUIT
½ in - 14NPT
¾ in - 14NPT

ELECTRICAL RATING
A
B

2,78 N (10 oz)
25,4 mm (1.0 in)
-12 °C to 93 °C
(10 °F to 200 °F)
REFERENCE
LSXJ3K-7A
LSXJ4L-7A

Roller may be set in vertical or horizontal position for cam or slide actuation

Cat whisker

Operating point:

44,1 mm (1.735 in)

LSX
CONTACT
SPDT

CONDUIT
½ in - 14NPT

ELECTRICAL RATING
A

REFERENCE
LSXF3K

CONDUIT
½ in - 14NPT

ELECTRICAL RATING
A

REFERENCE
BXF3K

BX
CONTACT
SPDT

Operating force max. (OF):
Pretravel max. (PT):
Operating temperature:
CONTACT
SPDT

CONDUIT
½ in - 14NPT

www.honeywell.com/sensing

ELECTRICAL RATING
A

1,39 N (5 oz)
50,8 mm (2.0 in)
-12 °C to 93 °C
(10 °F to 200 °F)
REFERENCE
LSXK3K-8A

67

Blank page

68

www.honeywell.com/sensing

LEVERS

Levers

REFERENCE

Separate levers must be ordered with side rotary
types. The table provides a cross reference
between product families and the lever order/
reference numbers. The following pages describe
the levers. Illustrations are for reference only.
Exact mounting drawings and dimensions are
available from your local sales office or from the
website below.
Levers lock in any position, 360° around the shaft.
Rollers may be mounted on the front or back of the
lever.
All levers are supplied with cap screws.
Explosion proof switches
Because of explosion proof requirements, only
nylon rollers or other non sparking material should
be selected. BX/LSX, CX and EX plunger and cat
whisker types are of non sparking material. Do not
mix or substitute.

Specification (unless stated
otherwise)
Lever radius/length:
Roller Diameter:
Roller Width:
-EX

1.5 in (38,1 mm)
0.75 in (19,1 mm)
0.25 in (6,35 mm)
0.312 in (7,92 mm)

Note:
Not all levers are compatible with
all switches

6PA57
6PA63
6PA69
6PA80
6PA82
6PA102
6PA144
GLZ51A
GLZ51B
GLZ52A
GLZ52B
GLZ54J
GLZ55B
LSZ51
LSZ51A
LSZ51B
LSZ51C
LSZ51D
LSZ51W
LSZ51Y
LSZ52
LSZ52A
LSZ52B
LSZ52C
LSZ52D
LSZ52J
LSZ52K
LSZ52M
LSZ52N
LSZ52W
LSZ52Y
LSZ53A
LSZ53B
LSZ53D
LSZ53E
LSZ53P
LSZ53S
LSZ53U
LSZ54
LSZ54M
LSZ54N
LSZ54R
LSZ54V
LSZ55
LSZ55A
LSZ55B
LSZ55C
LSZ55D
LSZ55W
LSZ55Y
LSZ61
LSZ67AA
LSZ68
6PA5-EX
6PA127-EX
6PA130-EX
6PA131-EX
6PA136-EX
6PA138-EX
6PA142-EX
6PA204-EX

ROLLER
MATERIAL
Aluminium
Stainless steel
Spring rod
Steel
Steel
Nylon
Ball bearing
Nylon
Steel
Nylon
Steel
Aluminium
Steel
N/A
Nylon
Steel
Nylon
Steel
Rubber
Rubber
N/A
Nylon
Steel
Nylon
Steel
Nylon
Nylon
Nylon
Nylon
Rubber
Rubber
Nylon
Steel
Steel
Nylon
Steel
Nylon
Steel
N/A
Aluminium
Stainless steel
Spring wire
Cable
N/A
Nylon
Steel
Nylon
Steel
Rubber
Rubber
Nylatron
Rubber
Delrin
Bronze
Nylon
Bronze
Bronze
Aluminium
Nylon
Bronze
Nylon

GLA

LIMIT SWITCH SERIES
HDLS
LS2

LS

EXPLOSION PROOF SERIES
BX/LSX
CX
EX

!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!

!
!

!
!

!
!

!

!

!
!
!
!
!
!

!

!

!

!
!
!
!

!
!

!

!

!

!

!
!

!
!

!
!

!
!

!

!
!
!
!
!
!
!
!

Stainless steel
levers
LS2Z51A
LS2Z51B
LS2Z52A
LS2Z52B
LS2Z54N

Nylon
Steel
Nylon
Steel
Steel

!
!
!
!
!

www.honeywell.com/sensing

!
!
!
!
!

!
!

69

LEVERS
OPTIONS * denotes lever suitable for Explosion Proof Series switches
One way roller lever

Standard fixed lever

MOUNTED ON

REFERENCE
LSZ51*

Nylon roller
Metal roller

Front
Front

LSZ51A*
LSZ51B

Nylon roller
Metal roller

Back
Back

LSZ51C*
LSZ51D

Nylon roller
Metal roller

Front
Front

GLZ51A
GLZ51B

Bronze roller
Nylon roller

Front
Front

6PA5-EX*
6PA127-EX*

Ball bearing roller

Front

6PA144

Without roller

Adjustable rod

RADIUS/LENGTH
Hub only

Bronze roller, clockwise

RADIUS/LENGTH REFERENCE
1.56 in (39,6 mm) 6PA130-EX*

Bronze roller, counter clockwise 1.56 in (39,6 mm) 6PA142-EX*

Perpendicular (cross) roller lever

Offset fixed lever

REFERENCE
LSZ54*

Aluminium rod

5.5 in (139,7 mm) LSZ54M*

Stainless steel rod

13.0 in (330,2 mm) LSZ54N

Aluminium, spring only

12.0 in (305 mm)

LSZ54R

Aluminium, flexible cable

4.8 in (122 mm)

LSZ54V

Aluminium rod

7.9 in (200 mm)

GLZ54J

Stainless steel rod

13.0 in (330,2 mm) 6PA63

Aluminium rod

5.3 in (134,1 mm) 6PA136-EX*

Adjustable rod, nylon roller

MOUNTED ON

REFERENCE
LSZ55*

Nylon roller
Metal roller

Back
Back

LSZ55A*
LSZ55B

Nylon roller
Metal roller

Front
Front

LSZ55C*
LSZ55D

Metal roller

Front

GLZ55B

Without roller

RADIUS/LENGTH REFERENCE
1.81 in (46,0 mm) 6PA131-EX*

Bronze roller

Yoke lever
Aluminium rod, nylon roler

RADIUS/LENGTH REFERENCE
12.5 in (317,5 mm) 6PA204-EX*

Adjustable lever
Spring rod

Operating radius/length:
-EX

1.5 in to 3.5 in
(38,1 mm to 88,9 mm)
1.69 in to 3.0 in
(42,9 mm to 76,2 mm)

Adjustable lever, without roller

MOUNTED ON REFERENCE
LSZ52

Nylon roller
Metal roller

Back
Back

LSZ52A*
LSZ52B

Nylon roller
Metal roller
Nylon roller,
Ø 1.0 in (25,4) x 0.5 in (12,7 mm)
Nylon roller, Ø 1.5 in (38,1)
Nylon roller, Ø 2.0 in (50,8)
Nylon roller, 0.5 in wide (12,7 mm)

Front
Front

LSZ52C*
LSZ52D

Front
Front
Front
Front

LSZ52J*
LSZ52K*
LSZ52M*
LSZ52N*

Nylon roller
Metal roller

Back
Back

GLZ52A
GLZ52B

Nylon roller,
Ø 1.0 in (25,4) x 0.5 in (12,7 mm) Front

Nylon roller
Metal roller

MOUNTED ON
Front/Back
Front/Back

REFERENCE
LSZ53A
LSZ53B

Metal roller

Front/Front

LSZ53D

Nylon roller

Back/Front

LSZ53E*

Metal roller
Nylon roller

Back/Back
Back/Back

LSZ53P
LSZ53S*

Metal roller

Back/Front

LSZ53U

Metal roller
Metal roller
Nylon roller

Front/Back
Front/Front
Front/Front

6PA80
6PA82
6PA102

RADIUS/LENGTH
12.0 in (305 mm)

REFERENCE
LSZ68

Ø 0.17 in (4,32 mm)

7.4 in (188 mm)

6PA69

6PA138-EX*

Note:

70

Ø 0.25 in (6,35 mm)

Not all levers are compatible with all switches

www.honeywell.com/sensing

LEVERS
* denotes lever suitable for Explosion Proof Series switches

Stainless steel levers

**Large rubber roller, adjustable
lever

Flexible loop

Roller Diameter:
Roller Width:

0.75 in (19,1 mm)
0.25 in (6,35 mm)

OPTIONS
Standard fixed lever
Flexible loop

RADIUS/LENGTH
6.0 in (152 mm)

REFERENCE
LSZ61

REFERENCE
LSZ52W

Ø 1.6 in X 0.50 in wide roller
(40,6 mm X 12,7 mm)

Hand operated button

Ø 2 in X 0.50 in wide roller
(50,8 mm X 12,7 mm)

LSZ52Y

Operating radius/length:

1.5 in (38,1 mm)

Nylon roller

MOUNTED ON
Front

REFERENCE
LS2Z51A*

Stainless steel roller

Front

LS2Z51B

**Conveyor roller arm
Adjustable lever
Ø 1.5 in (38,1 mm)

REFERENCE
6PA57

**Large rubber roller, fixed lever

Operating radius/length:
Plastic roller, 1.5 in Ø X 3.8 in long
(38,1 mm X 96,5 mm)

6.78 in (172,2 mm)
REFERENCE
LSZ67AA

NOTICE **
Ø 1.6 in X 0.50 in wide roller
(40,6 mm X 12,7 mm)
Ø 2 in X 0.50 in wide roller
(50,8 mm X 12,7 mm)

REFERENCE
LSZ51W

LSZ51Y

Large rubber rollers and conveyor roller arm
Because of the lever’s mass, the limit switch should be
mounted with the lever facing down. This will enable
gravity to help restore the switch to the free position.

Operating radius/length:

1.5 in to 3.5 in
(38,1 mm to 88,9 mm)

Nylon roller

MOUNTED ON
Back

REFERENCE
LS2Z52A*

Stainless steel roller

Back

LS2Z52B

Adjustable rod
**Large rubber roller, fixed offset
lever

Operating radius/length:

Ø 1.6 in X 0.50 in wide roller
(40,6 mm X 12,7 mm)
Ø 2 in X 0.50 in wide roller
(50,8 mm X 12,7 mm)

13 in (330,2 mm)
REFERENCE
LS2Z54N

REFERENCE
LSZ55W

LSZ55Y

Note:

Not all levers are compatible with all switches

www.honeywell.com/sensing

71

POWER RELAYS
Solder/Plug-In Terminal, DPDT
2,6
[0.10]

SZR-MY
Series Power
Relay

8 - O 1,2 [0.05] x 3 Holes

Current rating (SZR-MY2):
Current rating (SZR-MY4):
Contact resistance:
Contact material:
Agency approvals:
Operate time:
Release time:
Ambient temperature:
Ambient humidity:
Switching options:

5A
3A
50 mOhm max.
Fine silver
UL, CE, CSA
20 ms max.
20 ms max.
-25 °C to 75 °C (-13 °F to 167 °F)
45% RH to 85% RH
DPDT, 4PDT

6,3
[0.25]

SZR-MY Series relays have a small package design for multiple application
needs. Relays are available in two configurations: DPDT with a 5 A load and
4PDT with a 3 A load. One standard and three options are available: LED
indicator, internal surge protection diode, and LED indicator/diode protection.

0,5
[0.02]
Max. 36,0 [1.42]

Max. 28,0 [1.10]

0,5
[0.02]

SZR-MY Series general-purpose power relays are designed for a wide range
of applications including power, as well as logic control, for factory machines
and control panels.

Max. 21,5
[0.85]
6,0
[0.24]

Standard
COIL INPUT VOLTAGE
110/120 Vac
220 Vac
12 Vdc
24 Vdc

MAX. CONTACT RATING
250 Vac/5 amp
250 Vac/5 amp
125 Vdc/1 amp
125 Vdc/1 amp

REFERENCE
SZR-MY2-1-AC110-120V
SZR-MY2-1-AC220V
SZR-MY2-1-DC12V
SZR-MY2-1-DC24V

MAX. CONTACT RATING
250 Vac/5 amp
250 Vac/5 amp
125 Vdc/1 amp
125 Vdc/1 amp

REFERENCE
SZR-MY2-N1-AC110-120V
SZR-MY2-N1-AC220V
SZR-MY2-N1-DC12V
SZR-MY2-N1-DC24V

MAX. CONTACT RATING
125 Vdc/1 amp

REFERENCE
SZR-MY2-D1-DC24V

LED Indicator
COIL INPUT VOLTAGE
110/120 Vac
220 Vac
12 Vdc
24 Vdc

Diode Protection

MY2 Series

COIL INPUT VOLTAGE
24 Vdc

OPTIONS

LED Indicator/Diode Protection
COIL INPUT VOLTAGE
24 Vdc

3,3
[0.13]

1,0
[0.04]

Standard, PCB Terminal, DPDT

6,3
[0.25]
0,5
[0.02]
Max. 36,0 [1.42]

COIL INPUT VOLTAGE
110/120 Vac
220/240 Vac
24 Vdc

72

Max. 28,0
[1.10]

0,5
[0.02]

3,5
[0.14]

Max. 21,5
[0.85]
6,0
[0.24]

MAX. CONTACT RATING
250 Vac/5 amp
250 Vac/5 amp
125 Vdc/1 amp

REFERENCE
SZR-MY2-1P-AC110-120V
SZR-MY2-1P-AC220V-240V
SZR-MY2-1P-DC24V

www.honeywell.com/sensing

MAX. CONTACT RATING
125 Vdc/1 amp

REFERENCE
SZR-MY2-X1-DC24V

POWER RELAYS
Solder/Plug-In Terminal, 4PDT

MY4 Series

2,6
[0.10]

OPTIONS

14 - O 1.2 [0.05] x 3 Holes

Max. 28,0
[1.10]

6,3
[0.25]

0,5
[0.02]

6,3
[0.25]

3,5
[0.14]

0,5
[0.02]
Max. 36,0 [1.42]

COIL INPUT VOLTAGE
110/120 Vac
220/240 Vac
24 Vdc

Max. 21,5
[0.85]

6,0
[0.24]

Standard

5,0
[0.20]

MAX. CONTACT RATING
250 Vac/3 amp
250 Vac/3 amp
125 Vdc/0.6 amp

Max. 21,5
[0.85]

0,5
[0.02]
Max. 36,0 [1.42]

Max. 28,0
[1.10]

0,5
[0.02]

3,3
[0.13]

1,0
[0.04]

Standard, PCB Terminal, 4PDT

REFERENCE
SZR-MY4-1P-AC110-120V
SZR-MY4-1P-AC220V-240V
SZR-MY4-1P-DC24V

COIL INPUT VOLTAGE
110/120 Vac
220 Vac
12 Vdc
24 Vdc

MAX. CONTACT RATING
250 Vac/3 amp
250 Vac/3 amp
125 Vdc/0.6 amp
125 Vdc/0.6 amp

REFERENCE
SZR-MY4-1-AC110-120V
SZR-MY4-1-AC220V
SZR-MY4-1-DC12V
SZR-MY4-1-DC24V

MAX. CONTACT RATING
250 Vac/3 amp
250 Vac/3 amp
125 Vdc/0.6 amp
125 Vdc/0.6 amp

REFERENCE
SZR-MY4-N1-AC110-120V
SZR-MY4-N1-AC220V
SZR-MY4-N1-DC12V
SZR-MY4-N1-DC24V

MAX. CONTACT RATING
125 Vdc/0.6 amp

REFERENCE
SZR-MY4-D1-DC24V

LED Indicator
COIL INPUT VOLTAGE
110/120 Vac
220 Vac
12 Vdc
24 Vdc

Diode Protection
COIL INPUT VOLTAGE
24 Vdc

LED Indicator/Diode Protection
COIL INPUT VOLTAGE
24 Vdc

www.honeywell.com/sensing

MAX. CONTACT RATING
125 Vdc/0.6 amp

REFERENCE
SZR-MY4-X1-DC24V

73

POWER RELAYS

SZR-LY Series Power Relay

LY2 Series
OPTIONS

Operate time:
Release time:
Ambient temperature:
Ambient humidity:
Switching options:

10 A
50 mOhm max.
Silver cadium oxide
UL, CE, CSA
18,000 operations/hour (mechanical)
1,800 operations/hour (electrical)
25 ms max.
25 ms max.
-25 °C to 70 °C (-13 °F to 158 °F)
45% RH to 85% RH
DPDT, 4PDT

Max. 28,0 [1.10]

REFERENCE
SZR-LY2-1P-AC110-120V
SZR-LY2-1P-DC24V

Solder/Plug-In Terminal, DPDT
14 - O 3,0 [0.12]

3,0 [0.12]
Max. 36,0 [1.42]

6,4 [0.26]

Max. 21,5
[0.85]

Standard
COIL INPUT VOLTAGE
110/120 Vac
220 Vac
12 Vdc
24 Vdc

MAX. CONTACT RATING
250 Vac/10 amp
250 Vac/10 amp
125 Vdc/2 amp
125 Vdc/2 amp

REFERENCE
SZR-LY2-1-AC110-120V
SZR-LY2-1-AC220V
SZR-LY2-1-DC12V
SZR-LY2-1-DC24V

MAX. CONTACT RATING
250 Vac/10 amp
250 Vac/10 amp
125 Vdc/2 amp
125 Vdc/2 amp

REFERENCE
SZR-LY2-N1-AC110-120V
SZR-LY2-N1-AC220V
SZR-LY2-N1-DC12V
SZR-LY2-N1-DC24V

MAX. CONTACT RATING
125 Vdc/2 amp

REFERENCE
SZR-LY2-D1-DC24V

LED Indicator
COIL INPUT VOLTAGE
110/120 Vac
220 Vac
12 Vdc
24 Vdc

Diode Protection
COIL INPUT VOLTAGE
24 Vdc

LED Indicator/Diode Protection
COIL INPUT VOLTAGE
24 Vdc

74

www.honeywell.com/sensing

MAX. CONTACT RATING
125 Vdc/ 2 amp

REFERENCE
SZR-LY2-X1-DC24V

Max. 28,0 [1.10]

Current rating:
Contact resistance:
Contact material:
Agency approvals:
Operating frequency:

MAX. CONTACT RATING
250 Vac/10 amp
125 Vdc/2 amp

5,75
[0.23]

One standard and three options are available: LED indicator, internal surge
protection diode, and LED indicator/diode protection.

COIL INPUT VOLTAGE
110/120 Vac
24 Vdc

Max. 21,5 [0.85]

4,5
[0.18]

5,0
[0.20]

SZR-LY Series relays break 10 A loads are ideal for control panels that require
stable and reliable relays.

1,0
[0.04]
Max. 36,0 [1.42]

0,5
[0.02]

SZR-LY Series general-purpose power relays are designed for a wide range of
applications including power, as well as logic control, for factory machines
and control panels.

5,75
[0.23]

2,0
[0.08]

0,5
[0.02]

Standard, PCB Terminal, DPDT

POWER RELAYS

LY4 Series
OPTIONS
Solder/Plug-In Terminal, 4PDT

Max. 41,5 [1.63]

4,5
[0.18]

Max. 28,0 [1.10]

14 - O 3.0 Holes
5,0
[0.20]

Max. 28,0 [1.10]

2,0
[0.08]
1,0
[0.04]
Max. 36,0 [1.42]

0,5
[0.02]

0,5
[0.02]

Standard, PCB Terminal, 4PDT

Max. 36,0 [1.42]

3,0
[0.12]
6,4 [0.25]

Max. 41,5 [1.63]

Standard
COIL INPUT VOLTAGE
110/120 Vac
220/240 Vac
24 Vdc

MAX. CONTACT RATING
250 Vac/10 amp
250 Vac/10 amp
125 Vdc/2 amp

REFERENCE
SZR-LY4-1P-AC110-120V
SZR-LY4-1P-AC220V-240V
SZR-LY4-1P-DC24V

COIL INPUT VOLTAGE
110/120 Vac
220 Vac
12 Vdc
24 Vdc

MAX. CONTACT RATING
250 Vac/10 amp
250 Vac/10 amp
125 Vdc/2 amp
125 Vdc/2 amp

REFERENCE
SZR-LY4-1-AC110-120V
SZR-LY4-1-AC220V
SZR-LY4-1-DC12V
SZR-LY4-1-DC24V

MAX. CONTACT RATING
250 Vac/10 amp
250 Vac/10 amp
125 Vdc/2 amp
125 Vdc/2 amp

REFERENCE
SZR-LY4-N1-AC110-120V
SZR-LY4-N1-AC220V
SZR-LY4-N1-DC12V
SZR-LY4-N1-DC24V

MAX. CONTACT RATING
125 Vdc/2 amp

REFERENCE
SZR-LY4-D1-DC24V

LED Indicator
COIL INPUT VOLTAGE
110/120 Vac
220 Vac
12 Vdc
24 Vdc

Diode Protection
COIL INPUT VOLTAGE
24 Vdc

LED Indicator/Diode Protection
COIL INPUT VOLTAGE
24 Vdc

www.honeywell.com/sensing

MAX. CONTACT RATING
125 Vdc/2 amp

REFERENCE
SZR-LY4-X1-DC24V

75

POWER RELAYS

MY2 Series Socket

LY2 Series Socket
22,0 [0.87]

30,0 [1.18]

25,0 [0.99]

47,0
[1.85]

2 - M4
2 - O 4,5 [0.18] Holes

2,5
[0.10]

18,0
[0.70]

26,0
[1.02]

14,5
[0.57]

30,0 [1.18]

25,0 [0.99]

Max. 61,0 [2.40]

Max. 61,0 [2.40]

POLES
2

REFERENCE
SZX-SMF-08N

2 - O 4,5 [0.18] Holes

14-M3.5x8

18,0
[0.70]

26,0 [1.02]

2-M4

36,0 ± 0,2
[1.42 ± 0.008]

8,0
[0.31]

Max. 45,5
[1.79]

25,0 [0.99]

30,0 [1.18]

3,4 [0.13]

68,0 [2.68]

62,0 ± 0,1 [2.44 ± .004]

2-M3 or 2-M4

2 - O 6,0 [0.24] 7,0
[0.28]

69,0 ± 0,3
[2.72 ± 0.01]

4,5
[0.18]

26,0
[1.02]

35,2 [1.39]
15,6
[0.61]

45,0 [1.77]

3,9
[0.15]

4,2
[0.17]

REFERENCE
SZX-SLF-08N

LY4 Series Socket

6,0
[0.24]

62,0 [2.44]

POLES
2

35,5 [1.40]

MY4 Series Socket

TYPE
Rail socket

Max. 78,5 [3.09]

TYPE
Rail socket

3,0
[0.12]

25,0 ± 0,2
[0.99 ± .008]

4,2
[0.17]

62,0 ± 0,1
[2.44 ± .004]

45,0
[1.77]
15,6
[0.61]

3,0
[0.12]

2-M3 or 2-M4
2 - O 4,5 [0.18] Holes

26,0 [1.02]

19,0
[0.75]

8,0
[0.31]

26,0
[1.02]

35,2
[1.39]

62,0 [2.44]

4,2
[0.17]

3,9
[0.15]

67,0 [2.64]

6,0
[0.24]

Max. 61,0 [2.40]

Max. 66,0 [2.60]

Max. 30,0 [1.18]

TYPE
Rail socket

76

POLES
4

REFERENCE
SZX-SMF-14N

TYPE
Rail socket

www.honeywell.com/sensing

POLES
4

REFERENCE
SZX-SLF-14

SAFETY SWITCHES

Electromechanical Safety
Switches
Honeywell is a worldwide leader in advanced switching and sensing
technology - especially in the area of industrial safety. We offer both
electromechanical safety switches and electronic safety sensors as well as
safety control modules for safety applications in all categories of risk.
Customers can count on our diverse product line to meet all of their machine
safety applications.
Honeywell products meet or exceed European machine safety standards and
have been approved (CE, BG, INRS) for use in Europe for more than 25 years.
As North America moves toward harmonizing with global standards, machine
builders and users can confidently turn to Honeywell for compliant machine
safety solutions. Our products are designed to meet all applicable OSHA and
ANSI standards.
Refer to pages 6 and 7 for more information about degrees of protection and
electrical ratings.

Protective Guarding

Cable Pull Switches

Protective guarding around a dangerous machine can be achieved with
tamper-resistant safety switches. Safety switches incorporate positive opening
operation such that even a welded contact will be mechanically broken and a
stop signaled. These switches monitor the position of moveable guards and
doors, which are used to safeguard access to equipment and provide
protection from ejected pieces, chips, projectiles or oil. These safeguards
require a relatively low investment and provide reliable protection if they are
regularly checked and maintained.

Cable-pull limit switches serve as a readily accessible means of emergency
stop for applications. These cable-pull devices are visible, accessible and easy
to use and they immediately open the emergency stop circuit when activated.

www.honeywell.com/sensing

77

SAFETY SWITCHES

GKM Series
Global Miniature
Safety Key
Operated Switch

Used alone as Category 1 safety components or, in conjunction with other safety switches and our complete
range of safety relays, it is possible to construct comprehensive protection schemes with Category 2, 3 or 4
compliance.
The preleaded versions allow rapid fit, easy cable routing and function testing which cut costs dramatically
in OEM applications. Simple upgrade guarding solution for End User applications.
Low energy basic switches are rated as follows:
Operating Voltage Ue
1 Vdc to 60 Vdc or 1 Vac to 125 Vac
1 mA to 50 mA
Operating Current Ie
Example of catalog listing using a low energy basic switch - GKMA19
Mechanical life:
> 1 million
Sealing:
IP66/67, EN 60529, NEMA 1, 12, 13
Operating temperature:
-25 °C to 85 °C (-13 °F to 185 °F)
Approvals:
CE, UL, CSA
AC15 B300
DC13 Q300
Contacts:
Silver
Low energy
Gold plated
Switching options:
Slow action contacts
1 Normally Closed/1 Normally Open, Break Before Make
1NC/1NO, BBM - GKMF
1NC/1NO, BBM, low energy - GKMA, B, C, D

3
4

1 Brown

Blue 3

2
1

White 2
3

2

4

4 Black

1

2 Normally Closed
2NC - GKMF

2NC, low energy - GKMA, B, C, D

3
2

4
3 2

1 Brown

Blue 3

1

White 2

4 Black

1 4

Electrical ratings:

Designation & Utilization
Category
AC15
AC15
AC15
AC14

A600
A300
B300
D300

DC13
DC13

Q300
R300

IEC 60947-5-1/EN 60947-5-1
Rated operational current le (A)
at rated operational voltage Ue
120 V 240 V 380 V 480 V 500 V 600 V
6
3
1,9
1,5
1,4
1,2
6
3
3
1.5
0,6
0,3
125 V 250 V
0,55
0,27
0,22
0,1

Of key slot
90˚ - Key shown in optional
actuating positions

16 max. /
0.63

Body style 'B'

17,2 /
0.67

1,6 /
0.058
12,8 /
0.504

Key
slot

22,0 /
0.866
10 max. /
0.30
2 X mounting holes
for M4 or #8 screws.
Counter bored both sides
08,3 X 4,5 deep.
0.366 0.177

78

32 max. /
1.26
37,4 /
1.47

2,3 /
0.69
34 max. /
0.34

www.honeywell.com/sensing

VA
rating
Make
Break
7200
720
7200
720
3600
360
432
72
69
28

69
28

SAFETY SWITCHES
KEY STYLE

OPTIONS
Side exit cable

Side exit M12 dc micro-change
connector

Straight key

45 /
1.77
2 + max. /
0.945
3,5 /
0.138

12,8 /
0.504
2,5 /
0.093

CABLE LENGTH
1m
1m
2m
2m
2m
2m
3m
3m
3m
3m

CONTACT
2NC, low energy
1NC/1NO, BBM, low energy
1NC/1NO, BBM
2NC
2NC, low energy
1NC/1NO, BBM, low energy
1NC/1NO, BBM
2NC
2NC, low energy
1NC/1NO, BBM, low energy

REFERENCE
GKMA17
GKMA19
GKMA23
GKMA26
GKMA27
GKMA29
GKMA33
GKMA36
GKMA37
GKMA39

Face 'A'

21,3 /
0.638

CONTACT
1NC/1NO, BBM
2NC
2NC, low energy
1NC/1NO, BBM, low energy

REFERENCE
GKMC03
GKMC06
GKMC07
GKMC09

15 /
0.59

6,4 min. /
0.252

22 /
0.866

2 holes for M4
or #8 screws

REFERENCE
GKZ51M

Stainless steel

Bottom exit M12 dc micro-change
connector
90° key

Bottom exit cable

2 holes for M4
or #8 screws with
45˚ C' SK X 2,1 deep
0.083
14 max. /
0.55

Face 'A'

CONTACT
1NC/1NO, BBM
2NC, low energy
1NC/1NO, BBM, low energy
CABLE LENGTH
1m
1m
1m
1m
2m
2m
2m
2m
3m
3m
3m
3m

CONTACT
1NC/1NO, BBM
2NC
2NC, low energy
1NC/1NO, BBM, low energy
1NC/1NO, BBM
2NC
2NC, low energy
1NC/1NO, BBM, low energy
1NC/1NO, BBM
2NC
2NC, low energy
1NC/1NO, BBM, low energy

REFERENCE
GKMB13
GKMB16
GKMB17
GKMB19
GKMB23
GKMB26
GKMB27
GKMB29
GKMB33
GKMB36
GKMB37
GKMB39

REFERENCE
GKMD03
GKMD07
GKMD09

22 /
0.866
6,4 min. /
0.252

Dual exit M12 dc micro-change
connector

24 max. /
0.945

Stainless steel

CONTACT
1NC/1NO, BBM
2NC
2NC, low energy
1NC/1NO, BBM, low energy

12,8 /
0.504

32 max. /
1.25

REFERENCE
GKZ52M

REFERENCE
GKMF03
GKMF06
GKMF07
GKMF09

www.honeywell.com/sensing

79

SAFETY SWITCHES

GSS Series
Hinge Mount Safety
Limit Switch

The Hinge Mount Safety Limit Switch is designed for use on machine access doors as an alternative solution
to key operated interlocks and safety limit switches. When the access door is opened, a follower pin (not
supplied) slides down the slot in the actuator lever, forcing the actuator lever to rotate and positively open the
NC safety circuit to shut off the machine. Closing the access door rotates the actuator lever to the reset
position, closing the NC safety contacts.
The Hinge Mount Safety Limit Switch minimizes alignment problems because it may be offset-mounted from
the hinge point of the door. The tamper-resistant design and the positive opening contacts provide a higher
level of safety than the conventional spring-driven limit switches often used to monitor door position.
Low Energy Switching
In today’s demanding age of low energy controls, electromechanical switches are frequently used to interface
directly with safety relays, PLCs and other low energy devices. To accommodate this requirement GSS offers
a new gold plated contact version of the standard basic switch. This improves reliability of switching at low
currents and voltages by protecting the contact surfaces from contamination during operation or storage
prior to use.
Standard silver contacts have a disadvantage in that the contact surface may tarnish under certain
environmental conditions, e.g. in the presence of moisture.
Low energy basic switches are rated as follows:
Operating Voltage Ue
1 Vdc to 60 Vdc or 1 Vac to 125 Vac
1 mA to 50 mA
Operating Current Ie
Example of catalog listing using a low energy basic switch - GSCB33S2.
Switching options:
GSC/D
Snap action contacts (1NC/1NO)

13

14

21

22 Zb

Slow action contacts (1NC/1NO) BBM

GSE
Slow action contacts (4NC)
12

21

22

31

32 4Y

41

42

Slow action contacts (2NC/2NO) BBM

11

12

21

22

22

21

11

2Y, 2X

Zb
13

14

Slow action contacts (2NC)

11

34
44

Slow action contacts (3NC/1NO) BBM

12

2Y
21

33
43

11

12

21

22

31

32

43

44

3Y, 1X

22

Electrical ratings:

Designation & Utilization
Category

80

AC15
AC15
AC15
AC14

A600
A300
B300
D300

DC13
DC13

Q300
R300

IEC 60947-5-1/EN 60947-5-1
Rated operational current le (A)
at rated operational voltage Ue
120 V 240 V 380 V 480 V 500 V 600 V
6
3
1,9
1,5
1,4
1,2
6
3
3
1.5
0,6
0,3
125 V 250 V
0,55
0,27
0,22
0,1

www.honeywell.com/sensing

VA
rating
Make
Break
7200
720
7200
720
3600
360
432
72
69
28

69
28

SAFETY SWITCHES
ACTUATED SWITCHES

GSC Metal body
GSD Plastic body
EN 50047
Safety Standard

Rotated 90° to the left
from center

22 /
0.87
20 /
0.78

24,75 /
0.97

Rotated 90° to the right
from center

104 /
4.09
70 /
2.76
45 /
1.77

3/
0.12

180

MIN

R 2,15 /
0.08
55 /
2.16

GSC - Metal body
GSC - Metal body

30,5 /
1.20

14,5 /
0.57

3,5 /
0.138

30 /
1.18

CONTACT
1NC/1NO
1NC/1NO, BBM
2NC
2NC, low energy

CONDUIT
½ in NPT
½ in NPT
½ in NPT
20 mm

REFERENCE
GSCA01S1
GSCA03S1
GSCA06S1
GSCC36S1

GSD - Plastic body
conduit
thread

19,8 /
0.78
ø 23 /
ø 0.9

Mechanical life:
up to 1 million
Sealing:
IP 66, NEMA 1, 4 (GSC), 12, 13
Operating temperature:
-25 °C to 85 °C
(-13 °F to 185 °F)
Approvals:
IEC/EN 60947-5-1
AC15 A300
DC13 Q300
UL, CSA, BG

CONTACT
1NC/1NO, BBM
2NC
1NC/1NO, BBM
2NC
1NC/1NO

CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm

REFERENCE
GSDA03S1
GSDA06S1
GSDB03S1
GSDB06S1
GSDC01S1

CONTACT
1NC/1NO
1NC/1NO, BBM
2NC
2NC, low energy

CONDUIT
½ in NPT
½ in NPT
½ in NPT
PG 13,5

REFERENCE
GSCA01S3
GSCA03S3
GSCA06S3
GSCB36S3

GSD - Plastic body
CONTACT
1NC/1NO, BBM
2NC
1NC/1NO, BBM
2NC
1NC/1NO

CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm

REFERENCE
GSDA03S3
GSDA06S3
GSDB03S3
GSDB06S3
GSDC01S3

Rotated 90° either direction from
center
5,1 /
0.20

11,5 /
0.45

2/
0.08

45 /
1.77
70 /
2.76
90 min.

90 min.
12,5 /
0.49
28 /

24,8 /
0.97

GSC - Metal body
CONTACT
1NC/1NO
1NC/1NO, BBM
2NC
2NC, low energy

CONDUIT
½ in NPT
½ in NPT
½ in NPT
PG 13,5

REFERENCE
GSCA01S2
GSCA03S2
GSCA06S2
GSCB36S2

GSD - Plastic body
CONTACT
1NC/1NO, BBM
2NC
1NC/1NO, BBM
2NC
1NC/1NO

CONDUIT
½ in NPT
½ in NPT
PG 13,5
PG 13,5
20 mm

REFERENCE
GSDA03S2
GSDA06S2
GSDB03S2
GSDB06S2
GSDC01S2

www.honeywell.com/sensing

81

SAFETY SWITCHES

GSE EN 50047 Compatible
Safety 3 Conduit Metal
Standard

12,5 /
0.49

ACTUATED SWITCHES
Rotated 90° to the left
from center

42 /
1.65
40 /
1.57
22 /
0.87
20 /
0.79

24,75 /
0.97

104 /
4.09
70 /
2.76
45 /
1.77

3/
0.12

R 2,15 /
0.08

60 /
2.37

13,75 /
0.54
12 /
0.47

30 /
1.18

2,5 /
0.1

52 /
2.05
57 /
2.24

4/
0.16

CONTACT
2NC/2NO, BBM
3NC/1NO, BBM
4NC, low energy

65 /
2.56
conduit
thread

CONDUIT
½ in NPT
½ in NPT
20 mm

REFERENCE
GSEA44S1
GSEA46S1
GSEC41S1

23,8 /
0.94

ø 23 /
ø 0.9

Mechanical life:
up to 1 million
Sealing:
IP 66, NEMA/UL 1, 4, 12, 13
Operating temperature:
-25 °C to 85 °C
(-13 °F to 185 °F)
Approvals:
IEC/EN 60947-5-1
AC15 A300
DC13 Q300
UL, CSA, BG

Rotated 90° either direction from
center
5,1 /
0.20

11,5 /
0.45

2/
0.08

45 /
1.77
70 /
2.76
90 min.

90 min.
12,5 /
0.49
28 /

CONTACT
2NC/2NO, BBM

CONDUIT
½ in NPT

24,8 /
0.97

REFERENCE
GSEA44S2

Rotated 90° to the right
from center

180

CONTACT
2NC/2NO, BBM

82

MIN

CONDUIT
½ in NPT

REFERENCE
GSEA44S3

www.honeywell.com/sensing

SAFETY SWITCHES

GK Series
Dual Entry Key
Operated Safety
Interlock Switch

The GK Series is designed specifically for use on machines where key removal brings the machine to an
immediate safe condition. It provides enhanced operator safety when added to hinged or sliding guard
doors, screens and protective covers on enclosures. The GK Series is especially well suited for large door
applications, typically in the automotive plant floor environment. Its heavy duty construction withstands
harsh industrial environments where rugged, long-term durability is required.
Nearly 1000 options are available in a simple to understand part number tree.
A safety lockout device is also available for use with the GK Series. The lockout device (GKZL2) is specifically
designed to prevent a key from being inserted either manually, or by the access door being closed while
maintenance personnel are working on the machine. When inserted, the lockout device can accommodate
up to four padlocks to prevent unauthorised removal of the device.
Mechanical life:
up to 15 million
Sealing:
IP 67, NEMA/UL type 1, 4, 12,13
Operating temperature:
-25 °C to 85 °C (-13 °F to 185 °F)
Approvals:
CE, CSA, UL
AC15 A300/A600
DC13 Q300
Contacts:
Silver
Low energy
Gold
Switching options:
Snap action contacts (1NC/1NO)
Snap action contacts (2NC/2NO)

13

Zb
21

13

14

11

12

23

24

21

22

14

22

Slow action contacts (1NC/1NO), BBM
22

21

Slow action contacts (2NC)
21

22

11

12

2Y

Zb
13

14

Slow action contacts (2NC/2NO), BBM

Slow action contacts (3NC/1NO)

11

12

11

12

21

22

21

22

31

32

2y,2x
13

14

23

24

3y,1x
43

44

Slow action contacts (4NC)
11

12

21

22

31

32

41

42

4y

Electrical ratings:

Designation & Utilization
Category
AC15
AC15
AC15
AC14

A600
A300
B300
D300

DC13
DC13

Q300
R300

IEC 60947-5-1/EN 60947-5-1
Rated operational current le (A)
at rated operational voltage Ue
120 V 240 V 380 V 480 V 500 V 600 V
6
3
1,9
1,5
1,4
1,2
6
3
3
1.5
0,6
0,3
125 V 250 V
0,55
0,27
0,22
0,1

www.honeywell.com/sensing

VA
rating
Make
Break
7200
720
7200
720
3600
360
432
72
69
28

69
28

83

SAFETY SWITCHES

GK Series (continued)

Head orientation
OPTIONS
Opening to front and top

42 /
1.65

32 /
1.26

8/
0.32

9/
0.35

31 /
1.22
45,7
1.80

121,6 /
4.79

Opening to right and top

35 /
1.38

60 /
2.36
82 /
3.23

75,9 /
2.99

42,6 /
1.68

ø 5,3 /
0.21

7,3 /
0.29

30 /
1.18

5,3 /
0.21

Standard
CONDUIT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
PG 13,5
PG 13,5
PG 13,5
20 mm
20 mm
20 mm
20 mm
20 mm
20 mm
20 mm
20 mm

CONTACT
1NC/1NO
1NC/1NO
1NC/1NO
4NC
2NC/2NO, BBM
2NC/2NO, BBM
3NC/1NO, BBM
3NC/1NO, BBM
2NC/NO
4NC, low energy
3NC/1NO, BBM, low energy
1NC/1NO, BBM
1NC/1NO, BBM
2NC
2NC/2NO, BBM
1NC/1NO, BBM
2NC
2NC/2NO, BBM
1NC/1NO
1NC/1NO
1NC/1NO
2NC/NO
4NC, low energy
3NC/1NO, BBM, low energy
2NC

Single LED indicator
KEY
90°
Up-down
None
90°
Straight
90°
Straight
90°
Straight
None
None
Straight
90°
None
Straight
90°
90°
90°
Straight
90°
None
None
None
None
None

REFERENCE
GKBA1L7
GKBA1L8-F11*
GKBA1LX
GKBA10L7
GKBA14L6
GKBA14L7
GKBA16L6
GKBA16L7
GKBA2L6
GKBA30LX
GKBA36LX
GKBA3L6
GKBA3L7
GKBA6LX
GKBB14L6
GKBB3L7
GKBB6L7
GKBC14L7
GKBC1L6
GKBC1L7
GKBC1LX
GKBC2LX
GKBC30LX
GKBC36LX
GKBC6LX

Single LED indicator

CONDUIT CONTACT
1/2 NPT 2NC/2NO, BBM
1/2 NPT 1NC/1NO
KEY
Straight
90°
None
None
Straight
Straight
90°
Side-side
None
None
None
None
None
None

REFERENCE
GKCA1L6
GKCA1L7
GKCA1LX
GKCA6LX
GKCA10L6
GKCA14L6
GKCA14L7
GKCA14L9
GKCA30LX
GKCA36LX
GKCC1LX
GKCC6LX
GKCC30LX
GKCC36LX

KEY
90°

REFERENCE
GKDA14L7

Double LED indicator
CONDUIT CONTACT
1/2 NPT 2NC/2NO, BBM

www.honeywell.com/sensing

REFERENCE
GKCA14M6

22 /
0.87

Single LED indicator

CONTACT
1NC/1NO
1NC/1NO
1NC/1NO
2NC
4NC
2NC/2NO, BBM
2NC/2NO, BBM
2NC/2NO, BBM
4NC, low energy
3NC/1NO, BBM, low energy
1NC/1NO
2NC
4NC, low energy
3NC/1NO, BBM, low energy

KEY
straight

Opening to left and top

* fluorocarbon seal

CONDUIT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
20 mm
20 mm
20 mm
20 mm

84

CONDUIT CONTACT
1/2 NPT 2NC/2NO, BBM

KEY
Straight
90°

REFERENCE
GKCA14P6
GKCA1P7

Double LED indicator
CONDUIT CONTACT
1/2 NPT 2NC/2NO, BBM

KEY
90°

REFERENCE
GKDA14P7

SAFETY SWITCHES

GKL/GKR Series
Dual Entry Solenoid
Key Operated Safety
Interlock Switch

The GKR (head to the right) and GKL (head to the left) products offer the user an unrivalled range of standard
options.
The GKR/GKL product is a key actuated device incorporating a key trapping mechanism. The switch is used
on machinery where instant stop and access to the machinery is either impossible (due to the momentum of
the machine) or impractical (due to tool or machine damage or scrapped product if the current machine
cycle is interrupted).
The switch incorporates an optional manual override feature which allows removal of the key for emergency
access.
Over 1000 options are available in a simple to understand part number tree.
A safety lockout device is also available for use with the GKR/GKL Series. The lockout device (GKZL2) is
specifically designed to prevent a key from being inserted either manually, or by the access door being
closed while maintenance personnel are working on the machine. When inserted, the lockout device can
accommodate up to four padlocks to prevent unauthorised removal of the device.
Mechanical life:
up to 1 million
Sealing:
IP 68, NEMA/UL type 1, 4, 6P, 12,13
Operating temperature:
-25 °C to 40 °C (-13 °F to 104 °F)
Approvals:
CE, CSA, UL
AC15 A300/A600
DC13 Q300
Contacts:
Silver
Low energy
Gold-plated
Switching options:
Snap Action
Type 11NC/1NO Direct Opening
13

14

21

22 Zb

Slow Acting
Type 3
1NC/1NO, Break before make (BBM)

21

Type 14/15
2NC/2NO, Break before make (BBM)
11

12

21

22

22
2Y, 2X

Zb
13

14

33

34

43

44

2 Slow Acting
Type 36
3NC/1NO, Break before make (BBM),low energy

Type 40
4NC

11

12

21

22

21

22

31

32

31

32 4Y

41

42

43

44

11

3Y, 1X

Type 44
2NC/2NO, Break before make (BBM)
11

12

21

22

2Y,2X
33

34

43

44

12

Type 46
3NC/1NO, Break before make (BBM)

11

12

21

22

31

32

43

44

3Y,1X

www.honeywell.com/sensing

85

SAFETY SWITCHES

GKL/GKR Series (continued)
Key:

Type 6
Type 9
Type X

Straight
Side - side, spring loaded
No key

Latching mechanism:

Type A

Mechanical (solenoid unlock with
screwdriver)
Mechanical (without override)
Electrical (solenoid unlock with
screwdriver)

Type B
Type S

OPTIONS
Opening to front and top
9/
0.35

Solenoid voltage:
Type 2
Type 4

24 Vdc
120 Vac

Electrical ratings:

Designation & Utilization
Category
AC15
AC15
AC15
AC14

A600
A300
B300
D300

DC13
DC13

Q300
R300

IEC 60947-5-1/EN 60947-5-1
Rated operational current le (A)
at rated operational voltage Ue
120 V 240 V 380 V 480 V 500 V 600 V
6
3
1,9
1,5
1,4
1,2
6
3
3
1.5
0,6
0,3
125 V 250 V
0,55
0,27
0,22
0,1

VA
rating
Make
Break
7200
720
7200
720
3600
360
432
72
69
28

69
28

Left
1/2 in - NPT buna-n seals
CONTACT
TYPE
3 (1NC/1NO, BBM)
40 (4NC)
46 (3NC, BBM)

KEY
None
None
None

LATCHING
TYPE
A
A
A

SOLENOID
VOLTAGE
24 Vdc
24 Vdc
24 Vdc

REFERENCE

SOLENOID
VOLTAGE
24 Vdc
24 Vdc

REFERENCE

GKLE3LXA2
GKLE40LXA2
GKLE46LXA2

Right
1/2 in - NPT buna-n seals
32,5 /
1.28

19 /
0.75

33 /
1.30

CONTACT
TYPE
40 (4NC)
46 (3NC, BBM)

31 /
1.22

43,7 / 2 x 7,3 /
1.72
0.29

2 x ø 5,3 /
0.21

75 /
2.95

2 x 5,3 /
0.21

100 /
3.94

105,3 /
4.13

110 /
4.33

20 /
0.79

86

43 /
1.69
48,8 /
1.92

65 /
2.56 100 /
3.94

110 /
4.33

www.honeywell.com/sensing

KEY
None
None

LATCHING
TYPE
A
A

GKRE40LXA2
GKRE46LXA2

SAFETY SWITCHES

Opening to left and top

Opening to right and top

26 /
1.02

12 /
0.47

Left
1/2 in - NPT buna-n seals

Right
1/2 in - NPT buna-n seals
CONTACT
TYPE
3 (1NC/1NO, BBM)
3 (1NC/1NO, BBM)
3 (1NC/1NO, BBM)
3 (1NC/1NO, BBM)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)

KEY
None
None
None
None
None
None
None

LATCHING
TYPE
A
A
S
S
A
A
S

SOLENOID
VOLTAGE
24 Vdc
120 Vac
24 Vdc
120 Vac
24 Vdc
120 Vac
24 Vdc

LATCHING
TYPE
A
A
S
S
A
A
A
S
S

SOLENOID
VOLTAGE
24 Vdc
120 Vac
24 Vdc
120 Vac
24 Vdc
24 Vdc
120 Vac
24 Vdc
120 Vac

REFERENCE
GKRE3MXA2
GKRE3MXA4
GKRE3MXS2
GKRE3MXS4
GKRE36MXA2
GKRE36MXA4
GKRE36MXS2

20 mm - buna-n seals
CONTACT
TYPE
1 (1NC/1NO)
1 (1NC/1NO)
1 (1NC/1NO)
1 (1NC/1NO)
3 (1NC/1NO, BBM)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)

KEY
None
None
None
None
None
None
None
None
None

CONTACT
TYPE
3 (1NC/1NO, BBM)
3 (1NC/1NO, BBM)
3 (1NC/1NO, BBM)
3 (1NC/1NO, BBM)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)

KEY
None
None
None
None
None
None
None
None

LATCHING
TYPE
A
A
S
S
A
A
S
S

SOLENOID
VOLTAGE
24 Vdc
120 Vac
24 Vdc
120 Vac
24 Vdc
120 Vac
24 Vdc
120 Vac

LATCHING
TYPE
A
A
S
S
S
A
A
S
S
B

SOLENOID
VOLTAGE
24 Vdc
120 Vac
24 Vdc
120 Vac
24 Vdc
24 Vdc
120 Vac
24 Vdc
120 Vac
24 Vdc

REFERENCE
GKLE3PXA2
GKLE3PXA4
GKLE3PXS2
GKLE3PXS4
GKLE36PXA2
GKLE36PXA4
GKLE36PXS2
GKLE36PXS4

20 mm - buna-n seals
REFERENCE
GKRG1MXA2
GKRG1MXA4
GKRG1MXS2
GKRG1MXS4
GKRG3MXA2
GKRG36MXA2
GKRG36MXA4
GKRG36MXS2
GKRG36MXS4

CONTACT
TYPE
1 (1NC/1NO)
1 (1NC/1NO)
1 (1NC/1NO)
1 (1NC/1NO)
3 (1NC/1NO, BBM)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)
36 (3NC/1NO, BBM, low energy)
44 (2NC/2NO, BBM)

www.honeywell.com/sensing

KEY
Non
None
None
None
None
None
None
None
None
None

REFERENCE
GKLG1PXA2
GKLG1PXA4
GKLG1PXS2
GKLG1PXS4
GKLG3PXS2
GKLG36PXA2
GKLG36PXA4
GKLG36PXS2
GKLG36PXS4
GKLG44PXB2

87

SAFETY SWITCHES

Keys for GK and
GKL/GKR switches
Straight key
49,8 /
1.96

8,5 /
0.33

Locking slider bolt
with actuating key

77 /
3.03

20 /
0.79

2x ø 5,3 /
0.21

14 /
0.55

15 /
0.59

3x HOLE PROVIDED
FOR LOCKOUT
19,0 /
.75

3/
0.12

REFERENCE
GKZ56

90° key
8,5 /
0.33

14 /
0.55

49,8 /
1.96

2 x ø 5,3 /
0.21

40 /
1.57
52 /
2.05
7,0 ±,7 /
.28 ±.03

REFERENCE
GKZ57

4x ø 5,1 /
.20

4,93 /
.194

26,97 / 36,8 /
1.062 1.45

14,0 /
.55

41,81 ±,76 /
1.646 ±.030

Spring-loaded key: up/down

115,87 /
4.562

140,0 ±,7 /
5.51 ±.03

12,04 /
.474

13,5 /
0.53

18,5 /
0.73

17,8 /
0.70

37,10 ±1,52 /
1.460 ±.060 26,77 ±1,52 /
1.054 ±.060

8,5 /
0.33

0°key rotation

REFERENCE
GKZ71

180° key rotation

REFERENCE
GKZ73

90° key rotation

REFERENCE
GKZ72

270° key rotation

REFERENCE
GKZ74

2 X ø 5,3 /

0.21

84,9 /
3.34

40 /
30 /
1.57
1.18
14 /
0.55

REFERENCE
GKZ58

Spring-loaded key: left/right
8,5 /
0.33

84,9 /
3.34

2 X ø 5,3 /

14 /
0.55

0.21
20,5 /
0.81

18,5 /
0.73

13,5 /
0.53

30 /
1.18
40 /
1.57

REFERENCE
GKZ59

88

www.honeywell.com/sensing

SAFETY SWITCHES

CPS Series
Cable Pull Safety
Switch

CPS Series Cable Pull Safety Switches provide a readily accessible emergency stop signal. This is a costeffective means compared to using multiple emergency stop push-buttons. (Cable Pull Safety Switches are
not, however, to be used as a means of personnel safeguarding. They may be used to prevent further injury
or damage to equipment when used for emergency stop signaling.)
The CPS Series Cable Pull Safety switch is designed to provide emergency stop protection for exposed
conveyor and assembly lines. The internal mechanism latches on both slackened cable (push) and pulled
cable. This capability also enhances productivity by eliminating nuisance stops due to variations in temperature,
stretch of cable over time, and other application variables.
The 1CPS is intended for use in applications where the cable span is 76 m (250 ft) or shorter. It is an
economical solution for shorter runs or zone protection typical to automated systems. The 2CPS series is
intended for use in very long cable runs of 152 m (500 ft) or shorter, such as long conveyor lines found in
warehouses.
The CPS complies with: Low Voltage Directive 73/23/EEC, as amended by directive 93/68/EEC; Machinery
Directive 98/37/EEC only as the directives relate to the components being used in a safety function; IEC/EN
60947-1; IEC/EN 60947-5-1; IEC/EN 60947-5-5.
Mechanical life:
1 000 000
Sealing:
IP67, NEMA 1, 4, 12,13
Operating temperature:
1CPS
-25 °C to 80 °C (-13 °F to 176 °F)
2CPS
-40 °C to 80 °C (-40 °F to 176 °F)
Approvals:
AC15 A300
DC13 Q300
1CPS
UL, CSA
2CPS
UL, CSA, BG
Contacts:
1CPS
Silver
1CPS, Low energy
Gold plated
2CPS
Gold plate over silver
Switching options:

1CPS

2CPS

1NC/1NO
21

22

13

14

N/A
2NC/2NO
21

22

21

22

21

22

21

22

13

14

13

14

13

14

13

14

21

22

11

12

21

22

11

12

13

14

21

22

13

14

21

22

11

12

11

12

11

12

11

12

21

22

21

22

21

22

21

22

3NC/1NO

4NC

2CPS contact block mounting:

1
2

1

To housing
Removable with heavy duty terminals

2
I

I

1CPS indicator Light Code:

2CPS indicator Light Code:

No letter
A
B
No letter
A
B

www.honeywell.com/sensing

No indicator provided
24 Vdc red LED
120 Vac red LED
No indicator provided
24 Vdc red multi-cluster LED
120 Vac red multi-cluster LED

89

SAFETY SWITCHES

CPS Series (continued)
1CPS
6,35
[0.25]

B

152,4
[6.0]
81,28
[3.2]

1CPS
Cable Pull
Switch

SLACK

88,9
[3.5]

TENSIONED

33,02
[1.3]

RUN

RESET
OFF

99,06
[3.9]

172,72
[6.8]

76,2
[3.0]

4X Ø 7,11
Ø 0.28

50,8
[2.1]

12,7
[0.5]

117,42
[4.623]

A
65,20
[2.567]

56,79
[2.236] 50,83
[2.001]
3X 25,4
[1.0]
2X 26,67
[1.050]

A
B
C
D

25,4
[1.00]

C

25,4
[1.00]

D

Fully extended
Optional indicator
Conduit thread (3 total)
Mounting pad (4 total)

OPTIONS
Cable maintained
1/2 in NPT
CONTACT
1NC/1NO
1NC/1NO
1NC/1NO
2NC/2NO
2NC/2NO
2NC/2NO
3NC/1NO
3NC/1NO
3NC/1NO
4NC
1NC/1NO, low energy
2NC/2NO, low energy
2NC/2NO, low energy
2NC/2NO, low energy
3NC/1NO, low energy
4NC, low energy

90

20 mm
INDICATOR
None
24 V
120 V
None
24 V
120 V
None
24 V
120 V
None
None
None
24 V
120 V
None
None

REFERENCE
1CPSA1
1CPSA1A
1CPSA1B
1CPSA2
1CPSA2A
1CPSA2B
1CPSA3
1CPSA3A
1CPSA3B
1CPSA4
1CPSA5
1CPSA6
1CPSA6A
1CPSA6B
1CPSA7
1CPSA8

CONTACT
1NC/1NO
1NC/1NO
2NC/2NO
2NC/2NO
2NC/2NO
3NC/1NO
3NC/1NO
4NC
1NC/1NO, low energy
2NC/2NO, low energy
2NC/2NO, low energy
3NC/1NO, low energy
4NC, low energy

www.honeywell.com/sensing

INDICATOR
None
24 V
None
24 V
120 V
None
24 V
None
None
None
24 V
None
None

REFERENCE
1CPSC1
1CPSC1A
1CPSC2
1CPSC2A
1CPSC2B
1CPSC3
1CPSC3A
1CPSC4
1CPSC5
1CPSC6
1CPSC6A
1CPSC7
1CPSC8

SAFETY SWITCHES

2CPS

40,4
(1.60)
67,8
(2.63)

79,8
(3.14)
92,9
(3.66)

325,9 A
(12.75)

152,4
(6.00)
52,1
(2.05)
12,7
(0.50)

18,3
(0.72)

SLACK

RUN
OFF

TENSIONED

34,9
(1.38)

SLACK

TENSIONED

21,1
(0.75)

152,4
(6.00)

2X D
2X

2X

8,9
(0.35)

81,3
(3.20)

40,5
(1.60)

6,9
(0.27)

104,8
(4.13)

2X C
B

6,4
(0.25)

2X 31,75
(1.25)

57,2
(2.25)

12,7
(0.50)

2X D

C

2X 6,9
(0.27)
3X 21,5
(0.85)

139,7
(5.50)

OFF

Cable maintained both sides
1/2 in NPT
CONTACT
2NC/2NO
2NC/2NO
2NC/2NO
3NC/1NO
3NC/1NO
3NC/1NO
2NC/2NO
2NC/2NO
2NC/2NO
3NC/1NO
3NC/1NO
3NC/1NO

CONTACT BLOCK
MOUNTING
1
1
1
1
1
1
2
2
2
2
2
2

INDICATOR

REFERENCE

CONTACT

None
24 Vdc
120 Vac
None
24 Vdc
120 Vac
None
24 Vdc
120 Vac
None
24 Vdc
120 Vac

2CPSA1A1
2CPSA1A1A
2CPSA1A1B
2CPSA1B1
2CPSA1B1A
2CPSA1B1B
2CPSA2A1
2CPSA2A1A
2CPSA2A1B
2CPSA2B1
2CPSA2B1A
2CPSA2B1B

2NC/2NO
2NC/2NO
2NC/2NO
3NC/1NO
3NC/1NO
3NC/1NO
2NC/2NO
2NC/2NO
2NC/2NO

2NC/2NO
2NC/2NO
4NC

Fully extended
Optional indicator

C

Conduit thread (3 total)

D

Mounting pad (4 total)

INDICATOR

REFERENCE

None
24 Vdc
24 Vdc

2CPSC1A1
2CPSC1A1A
2CPSC1D1A

CONTACT BLOCK
MOUNTING
1
1
1
1
1
1
2
2
2

INDICATOR

REFERENCE

None
24 Vdc
120 Vac
None
24 Vdc
120 Vac
None
24 Vdc
120 Vac

2CPSA1A2
2CPSA1A2A
2CPSA1A2B
2CPSA1B2
2CPSA1B2A
2CPSA1B2B
2CPSA2A2
2CPSA2A2A
2CPSA2A2B

INDICATOR

REFERENCE

None
24 Vdc

2CPSC1A2
2CPSC1A2A

20 mm
CONTACT

CONTACT BLOCK
MOUNTING
1
1
1

A
B

No actuation right side, cable maintained left side
1/2 in NPT

20 mm
CONTACT

SLACK

RUN

TENSIONED

SLACK

TENSIONED

244,6 A
(9.63)

2NC/2NO
2NC/2NO

CONTACT BLOCK
MOUNTING
1
1

No actuation left side, cable maintained right side
1/2 in NPT
CONTACT
2NC/2NO
2NC/2NO
2NC/2NO
3NC/1NO
3NC/1NO
3NC/1NO
2NC/2NO
2NC/2NO
2NC/2NO

CONTACT BLOCK
MOUNTING
1
1
1
1
1
1
2
2
2

INDICATOR

REFERENCE

None
24 Vdc
120 Vac
None
24 Vdc
120 Vac
None
24 Vdc
120 Vac

2CPSA1A3
2CPSA1A3A
2CPSA1A3B
2CPSA1B3
2CPSA1B3A
2CPSA1B3B
2CPSA2A3
2CPSA2A3A
2CPSA2A3B

INDICATOR

REFERENCE

None
24 Vdc

2CPSC1A3
2CPSC1A3A

20 mm
CONTACT
2NC/2NO
2NC/2NO

CONTACT BLOCK
MOUNTING
1
1

www.honeywell.com/sensing

91

Blank page

92

www.honeywell.com/sensing

LINEAR AND ROTARY POSITION

Linear and Rotary Position
Position sensors respond to the movement or location of a target, such as a
molding press slide or a pulley shaft, by producing either a digital or an
analogue output correlated to its location. Honeywell position sensors include
digital and analogue Hall-effect position sensors, magnetoresistive digital
sensors and potentiometric rotary and linear sensors. Sensors are directly
compatible with other electronic circuits for application flexibility.
With the combined capabilities of three well-known brand names - Data
Instruments, Clarostat, Electro and New England Instruments - Honeywell the
group continuously strives to remain at the forefront of position sensing
technology. In this catalogue we present our range of Linear and Rotary
Position transducers and Torque Watch gauges, all suitable for use in
industrial environments.

www.honeywell.com/sensing

93

LINEAR AND ROTARY POSITION

Linear and
Rotary
Position
Transducers

Honeywell Sensing and Control manufactures a variety of potentiometric position sensors. The sensors use a tried and
true potentiometric technology originally developed for military applications and more recently applied to industrial
markets. MystR® conductive plastic potentiometric sensors are long-life units designed for rugged industrial
applications. The proprietary MystR® conductive plastic has an extensive temperature range, infinite resolution and
provides absolute position measurement on power-up. Intermediate signal conditioning is not required for normal
ratio-metric position sensing. Very small stroke units (5 mm [0.2 in]) and units required to withstand exposure to
harsh chemicals or work immersed in many different oils are available. If there is heavy hose down or spray from oil or
water, a water resistant or waterproof potentiometer such as the AQ series should be used.
Linear products have CE approval, Intrinsically Safe For Class I, II, III, Division 1, Groups A, B, C, D, E, F, G With Entity.
Vmax: 30 Vdc, Imax: 100 mA, Ci: 0.0 micro F, Li: 0.0 mH, T4A @ 105 °C Ambient.
Mechanical life:
Approvals:
Housing:
Element:
Shaft:
Wiper current:
Resolution:

LFII Series
Longfellow II linear position transducer

1 billion dither operations
CE, NEMA 4 - water resistant
Anodized aluminium
MystR® conductive plastic film
Stainless steel
< 1 uA
Infinite
1/4" - 28 NF-2A Thread
7/16" across flats, typ.

A

A

1.36
(34,5)

1.88
(47,8)

"Y"
"X"

0.75 ±0.01
(19,00 ±0,20)

'X' = Electrical travel + 3.19 in (81,0 mm)
'Y' = Electrical travel - 1.0 in (25,4 mm)
0.50
(12,70)

1.25
(31,80)

0.25
(6,40)

0.62
(15,90)
1.25
(31,80) 0.62
(15,90)

The new Longfellow II incorporates design innovations to increase transducer
life and provide greater resistance to vibration, while providing a smooth highquality signal for demanding factory control applications. It has a solid
stainless steel shaft, longer front-end bearings, a vibration-free damped
element, a spring-loaded ball joint and a high precision precious metal wiper.
Carrier guides are extruded the full length of the housing to ensure smooth
operation even under severe side load conditions.

0.125
(3,175)

-65 °C to 105 °C (-85 °F to 221 °F)
30 Vdc
± 0.1 %

0.84
(21,30)

1.00
(25,40)
2.00
(50,80)

0.156 x 0.312 Slot, typ.
(3,962 x 7,925)

Mounting Feet (2)

VIEW A-A
3

Mounting feet show above are for
standard LFII models only. Mounting
feet are not included with water
resistant LFII models. Water resistant
LFII models are shipped with brackets.

Shaft
extended

2

The newly designed internal components provide improvements based on
worldwide testing and field experience.
Operating temperature:
Supply voltage (max.):
Linearity:
Starting force (max.):
Standard
Water resistant
Backlash (max.):
Total Resistance:
Shaft Ø:
Termination:
Housing length:
Mechanical travel:

1.68
(42,70)

1
SCHEMATIC

OPTIONS
Standard
Mating connector, 3718401, sold separately

0,45 kg (1.0 lb)
2,27 kg (5.0 lb)
0,025 mm (0.001 in)
5000 Ohm
1/4 in
Connector, Binder Series 681
= Electrical travel + 3.19 in (81,02 mm)
= Electrical travel + 0.09 in (2,29 mm)

ELECTRICAL TRAVEL (IN (MM))
6.0 (152,4)
9.0 (228,6)
12.0 (304,8)
14.0 (355,6)
18.0 (457,2)
24.0 (609,6)
30.0 (762,0)
36.0 (914,4)
48.0 (1219,2)

REFERENCE
LF2S06N5KB6A
LF2S09N5KB6A
LF2S12N5KB6A
LF2S14N5KB6A
LF2S18N5KB6A
LF2S24N5KB6A
LF2S30N5KB6A
LF2S36N5KB6A
LF2S48N5KB6A

Water resistant
Mating connector, E02903021, sold separately
ELECTRICAL TRAVEL (IN (MM))
6.0 (152,4)
9.0 (228,6)
12.0 (304,8)
14.0 (355,6)
18.0 (457,2)
24.0 (609,6)
30.0 (762,0)
36.0 (914,4)
48.0 (1219,2)

94

www.honeywell.com/sensing

REFERENCE
LF2W06N5KB6A
LF2W09N5KB6A
LF2W12N5KB6A
LF2W14N5KB6A
LF2W18N5KB6A
LF2W24N5KB6A
LF2W30N5KB6A
LF2W36N5KB6A
LF2W48N5KB6A

LINEAR AND ROTARY POSITION

LFII Metric Series
Longfellow II linear position transducer
Operating temperature:
Supply voltage (max.):
Linearity:
Starting force (max.):
Standard
Water resistant
Backlash (max.):
Total Resistance:
Shaft Ø:
Termination:

Housing length:
Mechanical travel:

Dimensions in mm (inches)
19,00
(0.25)

-65 °C to 105 °C (-85 °F to 221 °F)
30 Vdc
± 0.1 %
0,45 kg (1.0 lb)
2,27 kg (5.0 lb)
0,025 mm (0.001 in)
5000 Ohm
1/4 in
Connector
A = Binder Series 681
G = DIN 43650
= Electrical travel + 91,0 mm (3.6 in)
= Electrical travel + 2,2 mm (0.09 in)

OPTIONS

M6X1
34,5
(1.36)

Standard - Binder
Mating connector, 3718401, sold separately

11,11 (0.48)
Across flats

50,8 (2.0)
42,7 (1.68)
47,8
(1.88)

21,3
(0.84)

'Y'

4,1
(0.16)

12,7
(0.50)

6,4
(0.25)
3,962 x 7,925 Slot
(0.156 x 0.312)

Mounting Feet (2)
Mounting feet show above are for
standard LFII models only. Mounting
feet are not included with water
resistant LFII models. Water resistant
LFII models are shipped with brackets.

'X'

'X' = Electrical travel + 91 mm (3.6 in)
'Y' = Electrical travel - 25 mm (1.0 in)
(EXCEPT for LFII 229:
'Y' = Electrical travel - 29 mm (1.14 in)

Shaft
3 extended

2

3
1

REFERENCE
LF2S0152M5KB8A
LF2S0229M5KB8A
LF2S0305M5KB8A
LF2S0355M5KB8A
LF2S0457M5KB8A
LF2S0610M5KB8A
LF2S0762M5KB8A
LF2S0914M5KB8A
LF2S1219M5KB8A

Standard - DIN 43650
Mating connector included
ELECTRICAL TRAVEL (MM (IN))
152,4 (6.0)
228,6 (9.0)
304,8 (12.0)
355,6 (14.0)
457,2 (18.0)
609,6 (24.0)
762,0 (30.0)
914,4 (36.0)
1219,2 (48.0)

REFERENCE
LF2S0152M5KB8G
LF2S0229M5KB8G
LF2S0305M5KB8G
LF2S0355M5KB8G
LF2S0457M5KB8G
LF2S0610M5KB8G
LF2S0762M5KB8G
LF2S0914M5KB8G
LF2S1219M5KB8G

Water resistant - Binder
Mating connector, E02903021, sold separately

31,8
(1.25)
0,62
(0.02)

50,8
(2.00)

ELECTRICAL TRAVEL (MM (IN))
152,4 (6.0)
228,6 (9.0)
304,8 (12.0)
355,6 (14.0)
457,2 (18.0)
609,6 (24.0)
762,0 (30.0)
914,4 (36.0)
1219,2 (48.0)

25,4
(1.00)

3,18
(0.125)

31,8
(1.25)

0,62
(0.02)

2
1 Connector
end

ELECTRICAL TRAVEL (MM (IN))
152,4 (6.0)
228,6 (9.0)
304,8 (12.0)
355,6 (14.0)
457,2 (18.0)
609,6 (24.0)
762,0 (30.0)
914,4 (36.0)
1219,2 (48.0)

REFERENCE
LF2W0152M5KB8A
LF2W0229M5KB8A
LF2W0305M5KB8A
LF2W0355M5KB8A
LF2W0457M5KB8A
LF2W0610M5KB8A
LF2W0762M5KB8A
LF2W0914M5KB8A
LF2W1219M5KB8A

Water resistant - DIN 43650
Mating connector included
ELECTRICAL TRAVEL (MM (IN))
152,4 (6.0)
228,6 (9.0)
304,8 (12.0)
355,6 (14.0)
457,2 (18.0)
609,6 (24.0)
762,0 (30.0)
914,4 (36.0)
1219,2 (48.0)

www.honeywell.com/sensing

REFERENCE
LF2W0152M5KB8G
LF2W0229M5KB8G
LF2W0305M5KB8G
LF2W0355M5KB8G
LF2W0457M5KB8G
LF2W0610M5KB8G
LF2W0762M5KB8G
LF2W0914M5KB8G
LF2W1219M5KB8G

95

LINEAR AND ROTARY POSITION

DR Series
Durastar rodless linear position transducer

2
3

.65 1.30
[16] [33]

1

The DuraStar rodless linear position transducer is the longest lasting factoryrugged potentiometer. It allows large misalignment of shaft and housing, while
providing whisper-quiet operation and smooth, clean signal output. MystR®
provides the DuraStar excellent durability, especially in dither operation which
is so often the determining factor in a potentiometer’s life. It is an excellent
replacement unit to reduce maintenance operations.
The rodless side-sealed DuraStar can also be used to replace a rodded
potentiometer in contaminated applications to improve performance while
providing long life.
Operating temperature:
Supply voltage (max.):
Linearity:
Starting force (max.):
Backlash (max.):
Shaft:
Termination:
Mechanical travel:

-65 °C to 105 °C (-85 °F to 221 °F)
75 Vdc
± 0.1 %
0,45 kg (1.0 lb)
0,025 mm (0.001 in)
M5x0.8 metric thread
Connector, DIN 43560
= Electrical travel + 5,0 mm (0.2 in)

0.39 [10]
1.025
[26]

.60
[15]

M5 x 20
Thread
"L"

3.56
[90,4]

Mating connector included
ELECTRICAL TRAVEL
(MM (IN))
101,6 (4.0)
127,0 (5.0)
152,4 (6.0)
203,2 (8.0)
228,6 (9.0)
304,8 (12.0)
355,6 (14.0)
406,4 (16.0)
457,2 (19.0)
508,0 (20.0)
609,6 (24.0)
762,0 (30.0)
914,4 (36.0)
1016,0 (40.0)
1270,0 (50.0)

TOTAL RESISTANCE
(OHM)
2000
2000
5000
5000
5000
5000
5000
5000
5000
5000
10000
10000
10000
10000
10000

HOUSING LENGTH
(MM (IN))
250,0 (9.84 )
280,0 (11.02)
300,0 (11.81)
352,0 (13.86)
375,9 (14.80)
452,1 (17.80)
514,1 (20.24)
553,9 (21.8)
605,0 (23.8)
656,0 (25.83)
757,9 (29.84)
910,0 (35.83)
1062,5 (41.83)
1164,0 (45.83)
1418,0 (55.83)

REFERENCE
DR04N02KB7G
DR05N02KB7G
DR06N05KB7G
DR08N05KB7G
DR09N05KB7G
DR12N05KB7G
DR14N05KB7G
DR16N05KB7G
DR18N05KB7G
DR20N05KB7G
DR24N10KB7G
DR30N10KB7G
DR36N10KB7G
DR40N10KB7G
DR50N10KB7G

.87
[22]

0.44 [11,2]

1.30
[33]

1.50
[38]

2.68 1.97
[68] [50]
.75
[19]

1.46 [37,0]
2.05 [52,07]
2.33 [59,27]

96

www.honeywell.com/sensing

M5 X 0.8
Thread

3
1
2
SCHEMATIC DIAGRAM
Pin 1 is at the connector end

LINEAR AND ROTARY POSITION

SLF Series
Short Longfellow linear position transducer
Operating temperature:
Supply voltage (max.):
Starting force (max.):
Standard
Water resistant
Backlash (max.):
Shaft Ø:
Termination:
Housing length:
Mechanical travel:
The Short Longfellow is frequently used for measuring linear position or
displacement up to 6 inches (152,4 mm) on a wide variety of manufacturing
and process equipment. The mechanical design of the unit’s front bearing,
anodized extruded aluminum housing, stainless steel shaft and precious metal
wipers are suitable for a factory’s harsh environment.
Based on the proprietary MystR® conductive plastic film, it provides a high
resolution, absolute position measurement without external signal
conditioners.

SLF01 or SLW01
SLF02 or SLW02
SLF03 or SLW03
SLF04 or SLW04
SLF06 or SLW06

-65 °C to 105 °C (-85 °F to 221 °F)
40 Vdc
0,45 kg (1.0 lb)
2,27 kg (5.0 lb)
0,025 mm (0.001 in)
1/4 in
Connector, Binder Series 681
= Electrical travel + 3.05 in (77,5 mm)
= Electrical travel + 0.2 in (5,1 mm)
Electrical Travel
(in (mm))
1.0 (25,4)
2.0 (50,8)
3.0 (76,2)
4.0 (101,6)
6.0 (152,4)

Total Resistance
(Ohm)
1500
3000
4500
6000
9000

OPTIONS
1
5

0.45
(11.4)

0.90
(22.9)

Standard
Mating connector, 3718401, sold separately

± 0.1 % Linearity
0.06
(1.5)
0.45
(11.4)

0.154 (3.91)
(2 holes per bracket)

0.90
(22.8)
1.75
(44.5)

0.88
(22.4)

Movable
mounting
brackets

0.19
(4.8)

ELECTRICAL TRAVEL
1.0 (25,4)
2.0 (50,8)
3.0 (76,2)
4.0 (101,6)
6.0 (152,4)

REFERENCE
SLF01N1500B6A
SLF02N3000B6A
SLF03N4500B6A
SLF04N6000B6A
SLF06N9000B6A

± 1.0 % Linearity
ELECTRICAL TRAVEL
1.0 (25,4)
2.0 (50,8)
3.0 (76,2)
4.0 (101,6)
6.0 (152,4)

0.38
(9.6)
0.68
(17.2)

REFERENCE
SLF01N1500F6A
SLF02N3000F6A
SLF03N4500F6A
SLF04N6000F6A
SLF06N9000F6A

X

1.35
(34.4)

Water resistant

MOUNTING BRACKETS

Mating connector, E02903021, sold separately
7/16 in.
(6.6)
across
flats

1/4 in.
(6.3)
across
flats

± 0.1 % Linearity

3 Shaft
Extended
1

1.36
(34.5)

ELECTRICAL TRAVEL
1.0 (25,4)
2.0 (50,8)
3.0 (76,2)
4.0 (101,6)
6.0 (152,4)

REFERENCE
SLW01N1500B6A
SLW02N3000B6A
SLW03N4500B6A
SLW04N6000B6A
SLW06N9000B6A

2
2000 ohm
current limiting resistor
1/4-28 NF-2A thread

0.45
(11.4)

± 1.0 % Linearity
ELECTRICAL TRAVEL
1.0 (25,4)
2.0 (50,8)
3.0 (76,2)
4.0 (101,6)
6.0 (152,4)

www.honeywell.com/sensing

REFERENCE
SLW01N1500F6A
SLW02N3000F6A
SLW03N4500F6A
SLW04N6000F6A
SLW06N9000F6A

97

LINEAR AND ROTARY POSITION

SLF Metric Series
Short Longfellow linear position transducer
Operating temperature:
Supply voltage (max.):
Starting force (max.):
Standard
Water resistant
Backlash (max.):
Shaft Ø:
Termination:
Housing length:
Mechanical travel:

1
5

11.4
22.9

1.5
11.4

3 Shaft
Extended
1

3.91
(2 holes
per bracket)

0,45 kg (1.0 lb)
2,27 kg (5.0 lb)
0,025 mm (0.001 in)
M6x1 metric thread
Connector, Binder Series 681
= Electrical travel + 77,5 mm (3.05 in)
= Electrical travel + 5,1 mm (0.2 in)
Electrical Travel
(in (mm))
25,4 (1.0)
50,8 (2.0)
76,2 (3.0)
101,6 (4.0)
152,4 (6.0)

Total Resistance
(Ohm)
1500
3000
4500
6000
9000

OPTIONS
Standard

22.9

Mating connector, 3718401, sold separately

± 0.1 % Linearity

2
2000 ohm
current limiting resistor

SLF025R4 or SLW025R4
SLF050R8 or SLW050R8
SLF076R2 or SLW076R2
SLF101R6 or SLW101R6
SLF152R4 or SLW152R4

-65 °C to 105 °C (-85 °F to 221 °F)
40 Vdc

ELECTRICAL TRAVEL
25,4 (1.0)
50,8 (2.0)
76,2 (3.0)
101,6 (4.0)
152,4 (6.0)

Movable
mounting
brackets

REFERENCE
SLF025R4M1500B8A
SLF050R8M3000B8A
SLF076R2M4500B8A
SLF101R6M6000B8A
SLF152R4M9000B8A

44.5

± 1.0 % Linearity

22.2
4.8 9.7

X

6.6
6.3
across across
flats
flats

17.1

ELECTRICAL TRAVEL
25,4 (1.0)
50,8 (2.0)
76,2 (3.0)
101,6 (4.0)
152,4 (6.0)

REFERENCE
SLF025R4M1500F8A
SLF050R8M3000F8A
SLF076R2M4500F8A
SLF101R6M6000F8A
SLF152R4M9000F8A

Water resistant

34.3

Mating connector, E02903021, sold separately

± 0.1 % Linearity

MOUNTING BRACKETS
34.5
M6 x 1
metric
thread

ELECTRICAL TRAVEL
25,4 (1.0)
50,8 (2.0)
76,2 (3.0)
101,6 (4.0)
152,4 (6.0)

REFERENCE
SLW025R4M1500B8A
SLW050R8M3000B8A
SLW076R2M4500B8A
SLW101R6M6000B8A
SLW152R4M9000B8A

11.4

± 1.0 % Linearity
ELECTRICAL TRAVEL
25,4 (1.0)
50,8 (2.0)
76,2 (3.0)
101,6 (4.0)
152,4 (6.0)

98

www.honeywell.com/sensing

REFERENCE
SLW025R4M1500F8A
SLW050R8M3000F8A
SLW076R2M4500F8A
SLW101R6M6000F8A
SLW152R4M9000F8A

LINEAR AND ROTARY POSITION

LT Series
Linear position transducer, 1/2 in diameter
OPTIONS
Standard
± 0.1 % Linearity

The LT Series are ½ inch diameter, linear position transducers rugged enough
to withstand the hostile environment of the factory. The LT can be provided
with shaft seals for spray or hose down environments.
Operating temperature:
Supply voltage (max.):
Starting force (max.):
Standard
Water resistant
Backlash (max.):
Shaft Ø:
Termination:
Housing length:
Mechanical travel:

LTS01 or LTW01
LTS02 or LTW02
LTS03 or LTW03
LTS04 or LTW04
LTS05 or LTW05
LTS06 or LTW06
LTS07 or LTW07
LTS08 or LTW08
LTS09 or LTW09
LTS10 or LTW10
# 28 Jacketed cable
6.0 (152,4) long min.

-40 °C to 80 °C (-40 °F to 176 °F)
30 Vdc
28,35 g (1.0 oz)
340,19 g (12.0 oz)
0,00508 mm (0.0002 in)
1/8 in
Cable
= Electrical travel + 1.50 in (38,10 mm)
= Electrical travel + 0.05 in (1,27 mm)
Electrical Travel
(in (mm))
1.0 (25,4)
2.0 (50,8)
3.0 (76,2)
4.0 (101,6)
5.0 (127,0)
6.0 (152,4)
7.0 (177,8)
8.0 (203,2)
9.0 (228,6)
10.0 (254,0)

Total Resistance
(Ohm)
1000
2000
3000
4000
5000
6000
7000
8000
9000
10000

Housing length 'X'
(Electrical Travel +1.50 (38,1))

1" [25,4]
(Retracted)
1/8"

[3.17]

1/2"
[12.7]

ELECTRICAL TRAVEL
1.0 (25,4)
2.0 (50,8)
3.0 (76,2)
4.0 (101,6)
5.0 (127,0)
6.0 (152,4)
7.0 (177,8)
8.0 (203,2)
9.0 (228,6)
10.0 (254,0)

REFERENCE
LTS01N01KB5C
LTS02N02KB5C
LTS03N03KB5C
LTS04N04KB5C
LTS05N05KB5C
LTS06N06KB5C
LTS07N07KB5C
LTS08N08KB5C
LTS09N09KB5C
LTS10N10KB5C

± 1.0 % Linearity
ELECTRICAL TRAVEL
1.0 (25,4)
2.0 (50,8)
3.0 (76,2)
4.0 (101,6)
5.0 (127,0)
6.0 (152,4)
7.0 (177,8)
8.0 (203,2)
9.0 (228,6)
10.0 (254,0)

REFERENCE
LTS01N01KF5C
LTS02N02KF5C
LTS03N03KF5C
LTS04N04KF5C
LTS05N05KF5C
LTS06N06KF5C
LTS07N07KF5C
LTS08N08KF5C
LTS09N09KF5C
LTS10N10KF5C

Water resistant
± 0.1 % Linearity
ELECTRICAL TRAVEL
1.0 (25,4)
2.0 (50,8)
3.0 (76,2)
4.0 (101,6)
5.0 (127,0)
6.0 (152,4)
7.0 (177,8)
8.0 (203,2)
9.0 (228,6)
10.0 (254,0)

REFERENCE
LTW01N01KB5C
LTW02N02KB5C
LTW03N03KB5C
LTW04N04KB5C
LTW05N05KB5C
LTW06N06KB5C
LTW07N07KB5C
LTW08N08KB5C
LTW09N09KB5C
LTW10N10KB5C

± 1.0 % Linearity
#4-40UNC-2A
Thd x .50 (12.7) Long

(Black)
Ground

(Red)
V-in
Shaft
Extended

(Brown)
V-out

Connect to High Impedance Circuit

ELECTRICAL TRAVEL
1.0 (25,4)
2.0 (50,8)
3.0 (76,2)
4.0 (101,6)
5.0 (127,0)
6.0 (152,4)
7.0 (177,8)
8.0 (203,2)
9.0 (228,6)
10.0 (254,0)

www.honeywell.com/sensing

REFERENCE
LTW01N01KF5C
LTW02N02KF5C
LTW03N03KF5C
LTW04N04KF5C
LTW05N05KF5C
LTW06N06KF5C
LTW07N07KF5C
LTW08N08KF5C
LTW09N09KF5C
LTW10N10KF5C

99

LINEAR AND ROTARY POSITION

MLT Series
Linear position transducer, 3/8 in Diameter
Housing length 'X'
(Electrical Travel +1.2 [30,48])

3/4"
[19,05]
(Retracted)
#4-40 UNC-2A
Thdx .50 [12,7] long

3/8"
[9,53]

The MLT Series is 3/8 in diameter linear position transducer that is rugged
enough to withstand hostile factory environments. Using a proprietary dual
wiper, internal ball joint and the MystR® conductive plastic film the MLT
provides a usable output at high vibration levels over long periods of time.
MLT transducers use precious metal wipers to further enhance reliability.
The MLT’s 3/8 inch diameter is among the smallest available and can used to
replace LVDT’s in many applications.
Operating temperature:
Supply voltage (max.):
Starting force (max.):
Backlash (max.):
Shaft Ø:
Termination:
Housing length:
Mechanical travel:

MLT0R5
MLT001
MLT002
MLT003
MLT004
MLT005
MLT006

-40 °C to 80 °C (-40 °F to 176 °F)
30 Vdc
28,35 g (1.0 oz)
0,0127 mm (0.0005 in)
1/8 in
Cable
= Electrical travel + 1.20 in (30,48 mm)
= Electrical travel + 0.05 in (1,27 mm)
Electrical Travel
(in (mm))
0.5 (12,7)
1.0 (25,4)
2.0 (50,8)
3.0 (76,2)
4.0 (101,6)
5.0 (127,0)
6.0 (152,4)

Total Resistance
(Ohm)
750
1500
3000
4500
6000
7500
9000

(Orange)
V-out

(Red)
V-in
Shaft
Extended

Connect to High Impedance Circuit

OPTIONS
± 0.1 % Linearity
ELECTRICAL TRAVEL
2.0 (50,8)
3.0 (76,2)
4.0 (101,6)
5.0 (127,0)
6.0 (152,4)

REFERENCE
MLT002N3000B5C
MLT003N4500B5C
MLT004N6000B5C
MLT005N7500B5C
MLT006N9000B5C

± 0.25 % Linearity
ELECTRICAL TRAVEL
1.0 (25,4)

REFERENCE
MLT001N1500D5C

± 1.0 % Linearity
ELECTRICAL TRAVEL
0.5 (12,7)
1.0 (25,4)
2.0 (50,8)
3.0 (76,2)
4.0 (101,6)
5.0 (127,0)
6.0 (152,4)

100

1/8"
[3,18]

3/16 x .063

3 - conductor cable
[4,75 x 1,6]
#26 AWG [65/44] 12.0 [306] long min.
(color coded per schematic)
(Black)
Ground

www.honeywell.com/sensing

REFERENCE
MLT0R5N0750F5C
MLT001N1500F5C
MLT002N3000F5C
MLT003N4500F5C
MLT004N6000F5C
MLT005N7500F5C
MLT006N9000F5C

LINEAR AND ROTARY POSITION

AQLT/AQMLT Series
Shaftless, waterproof linear position
transducer
The AQLT and AQMLT are shaftless waterproof linear potentiometers designed
to operate in wet/washdown and in-tank environments.
The AQ series features an external actuator magnetically coupled to a position
feedback element. The magnetic actuator replaces the shaft, found in
traditional linear transducers, and eliminates the need for additional stroke
length mounting space.
Precious metal dual wipers, MystR® proprietary conductive plastic, and
anodized aluminum housings provide long life and reliable operation in
numerous applications.
Operating temperature:
Supply voltage (max.):
Linearity:
Starting force (max.):

-40 °C to 80 °C (-40 °F to 176 °F)
30 Vdc
± 1.0 %
AQMT
56,7 g (2.0 oz)
AQMLT 28,35 g (1.0 oz)
IP68
Cable

Sealing:
Termination:

AQLT Series

AQMLT Series

Housing length:
Mechanical travel:

= Electrical travel + 54,87 mm (2.16 in)
= Electrical travel + 2,54 mm (0.1 in)

Housing length:
Mechanical travel:

= Electrical travel + 38,1 mm (1.5 in)
= Electrical travel + 2,54 mm (0.1 in)

Dimensions are in inches (mm)
AREA AVAILABLE FOR CLAMPING
WITHOUT RESTRICTING ELECTRICAL OR
MECHANICAL TRAVEL
0.20
0.52
(5,1)
(13,2)

AREA AVAILABLE FOR CLAMPING
WITHOUT RESTRICTING ELECTRICAL TRAVEL

0.76
(19,30)

0.20
(5,08)

Ø 0.375
(9,5)
Ø 0.50
(12,7)

ELECTRICAL TRAVEL PLUS 1.5 (38,1) MAX
3 WIRE JACKETED CABLE, Ø 0.14 (3,57)
#28 AWG CONDUCTOR
10 FEET LONG (3,05 M)
COLOR CODED PER SCHEMATIC

ELECTRICAL TRAVEL
PLUS 2.16" (54,86)
3 WIRE JACKETED CABLE (9/64 Ø)
#28 AWG CONDUCTOR
10 FEET LONG
COLOR CODED PER SCHEMATIC

Cable End
Black

RED

BLACK

Red

Wiper
Brown
Schematic

CABLE END

BROWN

Ø 1.125
(28,58)
Ø 0.516
(13,11)

Ø 0.156
(3,96)

0.25
(6,35)

Dimensions in inches (mm)
Ø 1.25
(31,75)

Ø 0.156
(3,96)

0.024 (0,61)
OFF CENTER

Ø 0.388
(9,78)

0.250
(6,35)

0.125
(3,18)
0.024
(0,60)
OFF CENTER

0.50
(12,70)

1.000
(25,40)

1.125 ±0.010
(28,575 ±0,25)

120˚

120˚

120˚

120˚

Ø 0.813
(20,65)
BOLT CIRCLE

1.00 ±0.010
(25,4 ±0,25)

0.500
(12,70)

Ø 0.690
(17,53)
BOLT CIRCLE

#4-40 UNC THD
4 PLACES

#4-40 UNC THD
6 PLACES

ELECTRICAL TRAVEL
(MM (IN))
152,4 (6.0)
304,8 (12.0)
457,2 (18.0)
609,6 (24.0)
762,0 (30.0)
965,2 (38.0)

TOTAL RESISTANCE
(OHM)
6000
12000
18000
24000
30000
38000

REFERENCE
AQLT06N06KFC
AQLT12N12KFC
AQLT18N18KFC
AQLT24N24KFC
AQLT30N30KFC
AQLT38N38KFC

ELECTRICAL TRAVEL
(MM (IN))
12,7 (0.5)
25,4 (1.0)
76,2 (3.0)
152,4 (6.0)
228,6 (9.0)
304,8 (12.0)

www.honeywell.com/sensing

TOTAL RESISTANCE
(OHM)
750
1500
3000
9000
13500
18000

REFERENCE
AQMLTR5N00750FC
AQMLT01N01500FC
AQMLT03N04500FC
AQMLT06N09000FC
AQMLT09N13500FC
AQMLT12N18000FC

101

LINEAR AND ROTARY POSITION

M22 Series
Rotary position transducer

3/8-32 UNEF-2A

0.06
(1.57)

(

0.09
2.36)

0.125/.124
( 3.175/3.150)

60
30

1

R 0.19
(R 4.93)

3

0.406 / 0.401
( 10.312 / 10.185)

2

0.31
(7.92)

0.06
( 1.57)

0.06
(1.57)

0.15
(3.81)
0.38
(9.70)

0.38
(9.70)

0.88
( 22.40)

0.87 ±.03
(22.00 ±0.8)

The M22 rotary potentiometer, available in servo and bushing mount, utilizes
wear-resistant MystR® conductive plastic film combined with precious metal
wipers to produce a quiet operating, low-noise, stable signal. Gold plated
terminals eliminate soldering problems due to tarnish. The high-quality
components are packaged in a cost-effective housing designed with an
anodized aluminum face plate or nickel-plated brass bushing to handle
assembly and operating loads. The integral internal terminations eliminate the
need for internal wires which may break under vibration and thermal stress.
The M22 series rotary potentiometers are used in position-sensing
applications which demand high reliability at low cost.

M22B

0.06
(1.5)

0.03
(0.8)

0.38
(9.5)

0.03
(0.8)

slot

flat

0.062
(1.57)
0.062
(1.57)
0.057 min.
(1.44)

(

0.09
2.36)

60
30

1

0.750/.749
( 19.05/19.025)

3

0.125/.124
( 3.175/3.150)

Operating temperature:
Supply voltage (max.):
Starting force (max.):
Total resistance:
Backlash (max.):
Shaft Ø:
Termination:
Housing size:
Bearing type:
Mechanical travel:
Electrical travel:

M22B
M22S

M22B
M22S
M22B
M22S

-40 °C to 85 °C (-40 °F to 185 °F)
30 Vdc
0.3 oz in (torque)
1.0 oz in (torque)
2000 Ohm
0.1°
3,175 mm (0.125 in)
Gold plated solder terminals
22,0 mm (0.87 in)
Sleeve
330°
Continuous rotation
320°
340°

2

0.75 max.
( 19.05)
0.50 ±0.03
(12.70 ±0.8)

OPTIONS
Threaded bushing mount
LINEARITY
± 0.5 %
± 1.0 %

REFERENCE
M22B2KE1S
M22B2KF1S

Servo mount
LINEARITY
± 0.25 %
± 0.5 %
± 1.0 %

102

REFERENCE
M22S2KD1S
M22S2KE1S
M22S2KF1S

www.honeywell.com/sensing

0.50
(12.60)

0.15
(3.81)

0.88
( 22.40)

M22S

R 0.19
(R 4.93)

LINEAR AND ROTARY POSITION

WPM Series
Rotary position transducer, servo mount

0.500 ±0.032
(12.70 ±0.81)

0.625
(15.88)
0.260
(6.60)

0.68 Rad.
max.

30˚ Ty
p.

2
1

0.7500 / 0.7495
Dia.
(19.05/19.04)

3

WPM 18-09
0.875 Dia.
(22.22)

0.1249 / 0.1246
Dia.
(3.172/3.165)

MA

DE IN U . S. A

.

0.062
(1.57)
0.062
(1.57)
0.500 ±0.032
(12.70±.81)

The MystR® film provides exceptionally long rotational and dither life without
sacrificing microlinearity or resolution. The shielded ball bearings ensure long
life even with side load conditions.
Operating temperature:
Supply voltage (max.):
Total resistance:
Backlash (max.):
Shaft Ø:
Termination:
Bearing type:
Mechanical travel:
Approvals:

30˚

30˚

0.275
(6.98)

Available in servo mount styles, the WPM Series rotary transducer provides
long life by utilizing the proprietary MystR® conductive plastic film, precious
metal wipers and shielded ball bearings on the stainless steel shaft.

0.064 / 0.057
(1.63 / 1.45)

0.78 Rad.
max.

0.609
(16.29)

2

0.9688 / 0.9683
Dia.
(24.608 / 24.595)

1

0.970
Dia.
(24.64)

3

WPM 25-11
0.1249 / 0.1246
Dia.
(3.172 / 3.165)

1.062
Dia.
(26.97)

MA

DE IN U . S. A

.

0.062
(1.57)

-55 °C to 125 °C (-67 °F to 257 °F)
60 Vdc
5000 Ohm
0.01 %
WPM5KA4* 3,175 mm (0.125 in)
WPM5KB1*
6,35 mm (0.25 in)
Gold plated solder terminals
Ball bearings
Continuous rotation
MIL-PRF-39023 qulaified

0.062
(1.57)

0.064/0.057
(1.63/1.45)

0.98
Rad. max.
(24.9)

0.774
(19.66)

0.500 ±0.032
(12.70 ±0.81)
0.093
(2.36)

40˚

20˚

0.335
(8.51)

1

1.3125 / 1.3120
Dia.
(33.34 / 33.32)

WPM 45-13
MA

ELECTRICAL TRAVEL
350°
353°

0.062
(1.57)

LINEARITY

REFERENCE
WPM5KA4S4513
WPM5KA4S6520

.

30˚

0.333
(8.46)

± 0.075 %
± 0.075 %

DE IN U.S.A

0.078
(1.98)

1.25
Rad. max.
(31.7)

0.800
(20.32)

0.500 ±0.032
(12.70 ±0.81)

STARTING FORCE
(MAX.)
0.8 oz in (torque)
1.0 oz in (torque)

3

0.2497 / 0.2494
Dia. shaft
(6.342 / 6.334)

OPTIONS
A4

2

1.437
Dia.
(36.50)

15˚

0.093
(2.36)

1

2

3

2.000
Dia.
(50.80)

1.875 / 1.874
Dia.
(47.62 / 47.60)

WPM 65-20
0.2497 / 0.2494
Dia. shaft
(6.342 / 6.334)

B1
ELECTRICAL TRAVEL
340°
345°

MA

STARTING FORCE
(MAX.)
0.4 oz in (torque)
0.4 oz in (torque)

LINEARITY

REFERENCE

± 0.1 %
± 0.1 %

WPM5KB1S1809
WPM5KB1S2511

DE IN U.S.A

.

.062
(1.57)
.078
(1.98)

www.honeywell.com/sensing

103

LINEAR AND ROTARY POSITION

Torque Watch
Guages

The Torque Watch, an industry mainstay when an accurate indication of rotary force is necessary, is
simple to use, requiring no special tools or setups. Available in three models they cover ranges from
0.003 to 200 inch-ounces. Attach the gauge to the device being measured, and simply rotate it, for a
direct reading dial.
Protection against over-torque is provided by a stainless steel internal rotation stop. The low range
366 Series will prevent damage from over-torque up to three times the normal range, whilst the mid range
641 Series and the high range 940 Series will prevent damage up to twice the normal range.
Models are available in standard (ounce inch), metric (gram centimeter) and System International
(Newton meter) measuring options.

366 Series
Low range
0.003 - 0.60 oz in

651 Series
Mid range
0.05 - 40.0 oz in

940 Series
High range
15.0 - 200.0 oz in

The Series 366 Torque Watch accurately measures
very low torque. Three miniature adapter chucks
allow simple coupling to the device being
measured.

The Series 651 Torque Watch provides accurate
measurement of low static torque. A 1/4 inch
keyed chuck provides a simple means of coupling
to the device under measurement.

The Series 940 Torque Watch accurately measures
torque in values that range form 15.0 to 200 oz/in.
A 3/8 inch keyed chuck and 3/8 inch square socket
driver adapter provide a simple means of coupling
to the device under measurement.

OPTIONS

OPTIONS

Standard

Standard

OUNCE INCHES
0.06 to 0.6
0.01 to 0.1
0.003 to 0.03

REFERENCE
366-0
366-2
366-3

OUNCE INCHES
0.05 to 1.2
1 to 20
2 to 40
0.1 to 2.4
0.25 to 5
0.5 to 10

OPTIONS
REFERENCE
651C-1
651C-2
651C-3
651X-2
651X-3
651X-4

Metric
GRAM CENTIMETER
6 to 42
1 to 7.5
0.2 to 2

OUNCE INCHES
30 to 200
15 to 100

REFERENCE
940-1
940-2

Metric
REFERENCE
366-0M
366-2M
366-3M

GRAM CENTIMETER
2.5 K to 14.3 K
1 K to 7.1 K

Metric
GRAM CENTIMETER
2.5 to 80
50 to 1.2 K
150 to 2.8 K
5 to 150
10 to 300
25 to 600

REFERENCE
651C-1M
651C-2M
651C-3M
651X-2M
651X-3M
651X-4M

System International
NEWTON METER
0.5 to 9
10 to 140
15 to 285
1 to 18
2 to 36
5 to 70

104

Standard

REFERENCE
651C-1SI
651C-2SI
651C-3SI
651X-2SI
651X-3SI
651X-4SI

www.honeywell.com/sensing

REFERENCE
940-1M
940-2M

System International
NEWTON METER
0.25 to 1.4
0.1 to 0.7

REFERENCE
940-1SI
940-2SI

INDEX

LINEAR AND ROTARY POSITION

Clarostat Rotary Position Transducers
TH100 Series

HRS100 Series, Hall-effect

The TH-100 Series puts Honeywell’s proven variable-resistor technology to
work in angle-management applications such as control-lever sensing and
equipment position feedback. High performance and low cost make it
attractive for a wide range of applications. Special electrical and mechanical
configurations, including dual tracks, D-shape rotor holes, etc. are available on
special order.

The HRS100 provides angular position information for a variety of sensing
and control applications in the automotive, marine, truck, off-road, industrial
implementation, aerospace, and rail industries. The use of magnetically
coupled information in place of a mechanical wiper assembly provides a long
life, cost-effective solution for harsh environments that include temperature,
vibration, dither, moisture and dirt.

The device provides for angle measurements, has 152,4 mm (6.0 in) wire
leads, a 6,35 mm (0.25 in) slotted thru hole and is sealed.

This position sensor incorporates Hall-effect to provide a sensing device that
will last for more than 50 million operations. The device is packaged in a metal
housing with a 9,5 mm (0.375 in) diameter bushing and a
6,35 mm (0.25 in) diameter slotted shaft and solder lug terminals.

Power rating:
0.5 W max.
Element type:
Conductive plastic
Terminal type:
three 20 AWG
Shaft:
6,35 mm (0.25 in) thru hole with .105 w x .090 d slot
Body:
38,1 mm (1.5 in) x 45,72 mm (1.8 in)
Electrical taper:
Linear
Storage & operating temperature:
-40 °C to 120 °C (-40 °F to 248 °F)
Working voltage (max):
350 Vdc
Linearity:
± 5% standard; to ± 1% special
Total resistance:
10 K
Total resistance tolerance:
± 15%
Rotational cycles:
> 1 million

Terminal type:
Bushing:
Shaft:
Body:
Electrical taper:
Operating temperature:
Supply voltage (max):
Linearity:
Rotational cycles:
Mechanical operating angle:

Straight solder lug
9,52 mm (.375 in) FMS, includes C-ring
Slotted 6,32 mm ± 0,03 (0.249 in ± 0.001)
27,79 mm (1.094 in) Ø
Linear
-40 °C to 85 °C (-40 °F to 185 °F)
5 Vdc
± 2%
10 million
90°

Mounting Surface
27,69 [1.09]
13,2 [0.52]

20,32 [0.08]
9,53 [0.375]

22,23 [0.875]

GRD VDD 2,84 [0.12]
Output

OPTIONS

OPTIONS

180° Rotation

90° Rotation

TAPER
Linear

CABLE CONNECTOR
No

REFERENCE
640CS103A06NAAY

CABLE CONNECTOR
No

REFERENCE
640ES103A06NAAY

SHAFT
Slotted

LUG
Straight Solder

3.3 [0.13]
19,05 [0.75]

REFERENCE
HRS100SSAB090

90° Rotation
TAPER
Linear

www.honeywell.com/sensing

105

LINEAR AND ROTARY POSITION

Clarostat Rotary Potentiometers and Position Transducers
578 Series, Precision potentiometer

574 Series, Commercial potentiometer

The 578 Series conductive plastic precision potentiometer puts Honeywell’s
proven variable resistor technology to work in a high performance, costeffective device. With its compact size, rugged construction and advanced
versatility, the 578 provides superior control for applications such as joy-stick
controllers and position-sensing devices.

The 574 Series conductive plastic potentiometer offers low mounting profile,
smooth feel, and robust construction with a thermoplastic housing, bushing,
and shaft. Terminals are PC style with a bracket for vertical mounting. No
hardware is included.

The model 578 features a 9,5 mm x 9,5 mm (0.375 in x 0.375 in) bushing,
6,35 mm x 19,05 mm (0.25 in x 0.75 in) slotted shaft, linear taper, and type A
pc pins (please consult with the factory for custom OEM configurations).

Power rating:
Element type:
Terminal type:
Bushing:
Shaft:
Body:
Electrical taper:
Operating temperature:
Working voltage:
Linearity:
Total resistance tolerance:
Rotational cycles:
Mechanical rotation:

Power rating:
Element type:
Terminal type:
Bushing:
Shaft:
Body:
Electrical taper:
Operating temperature:
Working voltage:
Linearity:
Total resistance tolerance:
Revolutions:
Mechanical rotation:

0.5 W @ 70 °C (158 °F)
Conductive plastic
PC pin type A
9,52 mm (0.375 in) D x 9,52 mm (0.375 in) L
6,35 mm x 19,05 mm (0.25 in x 0.75 in) Slotted
22,86 mm (0.900 in) Ø
Linear
-40 °C to 100 °C (-40 °F to 212 °F)
400 Vdc
1%
± 10%
5 million
320° ± 5°

0.25 W @ 70 °C (158 °F)
Conductive plastic
PC terminals type C with C mounting bracket
M9 x 6,35 mm (0.25 in) L
6,35 (0.25 in) Ø x 19,05 (0.75 in) L
21,08 mm (0.830 in) square
Linear
-40 °C to 120 °C (-40 °F to 248 °F)
350 Vac
± 5%
± 20%
50,000
300° ± 5°

8,13 [0.32]

21,09 ± 0,13
[0.83 ± 0.005]

11,08 [0.46]

PC Terminals
Type C-30
10,54 [0.415]
3,96 [0.156]
8,71 [0.343]

Ø22,96 [Ø 0.90 ]
.010

Ø 6,35
[Ø 0.25]

3,96 [0.156]

9,22[0.363]

Type “C” Mtg.
With Bracket

CL
12,16 ± 0,25 [0.48 ± 0.01]

14,49 ± 0,25 [0.57 ±.010]

3/8-32 UNEF

T

OPTIONS

CW W CCW

5,84

15,24 ± 0,25 [0.60 ±.01] 3,3 ± 0,25 [0.13 ±.01]
1,02 ± 0,25 [0.04 ±.01]
5,08 ± 0,25 [0.20 ±.010] (2X)

ANTI-ROTATIONAL PIN
Ø 1,52 ± 0,13 [Ø 0.06 ±.005]

Flatted Shaft

30°
CL

19,05 ± 0,25 [0.075 ±.010] (2X)

TYPE "A" MOUNTING

OPTIONS

RESISTANCE
1 kOhm
10 kOhm
100 kOhm
50 kOhm

TAPER
Linear
Linear
Linear
Linear

REFERENCE
574SX1M48F102SD
574SX1M48F103SD
574SX1M48F104SD
574SX1M48F503SD

TAPER
Linear
Linear
Linear
Linear

REFERENCE
574SX1M48S102SD
574SX1M48S103SD
574SX1M48S104SD
574SX1M48S503SD

1 kOhm Resistance
SHAFT
Slotted stainless steel

RESISTANCE TAPER
Linear

REFERENCE
578X1G48S102SA

RESISTANCE
1 kOhm
10 kOhm
100 kOhm
50 kOhm

5 kOhm Resistance
SHAFT
Slotted stainless steel

Slotted Shaft

RESISTANCE TAPER
Linear

REFERENCE
578X1G48S502SA

RESISTANCE TAPER
Linear

REFERENCE
578X1G48S103SA

10 kOhm Resistance
SHAFT
Slotted stainless steel

106

www.honeywell.com/sensing

LINEAR AND ROTARY POSITION

575 Series, Commercial potentiometer

590 Series, Commercial potentiometer

The 575 Series conductive plastic potentiometer offers a smooth feel and
robust construction, with a thermoplastic housing, bushing, and shaft.
Terminals are solder-hook style for panel mounting. No hardware is included.

The 590 Series conductive plastic modular potentiometer features low
electrical noise, smooth feel, robust construction, and brass bushing and
shaft. Terminals are PC style. Hardware included. Multiple sections(up to
three) are available on special order.

Power rating:
Element type:
Terminal type:
Bushing:
Shaft:
Body:
Electrical taper:
Operating temperature:
Working voltage:
Linearity:
Total resisteance tolerance:
Rotational cycles:
Mechanical rotation:

0.5 W @ 70 °C (158 °F)
Conductive plastic
Solder hook-200 grid
9,52 mm (.375 in) D x 6,35 mm (0.25 in) L
6,35 mm (0.25 in) Ø x 19,05 mm (0.75 in) L
21,08 mm (0.830 in) square
Linear
-40 °C to 120 °C (-40 °F to 248 °F)
350 Vac
± 5%
± 20%
50,000
300° ± 5°

Power rating:
0.5 W @ 70 °C (158 °F)
Element type:
Conductive plastic
Terminal type:
PC, 6,35 mm (0.25 in) long
Bushing:
6,35 mm (0.25 in) Ø x 6,35 mm (0.25 in) L
Shaft:
Slotted, 3,17 mm (0.125 in) Ø x 22,23 mm (0.875 in) L
Body:
12,7 mm (0.50 in) Ø
Electrical taper:
Linear
Operating temperature:
-40 °C to 120 °C (-40 °F to 248 °F)
Linearity:
± 5%
Total resistance tolerance:
± 10% (up to 500 kOhms)
± 20 % (1 MOhm and over)
Rotational cycles:
50,000
Mechanical rotation:
295° ± 5°

OPTIONS
Flatted Shaft
RESISTANCE
1 kOhm
10 kOhm
50 kOhm

TAPER
Linear
Linear
Linear

REFERENCE
575SX1A48F102SS
575SX1A48F103SS
575SX1A48F503SS

Slotted Shaft
RESISTANCE
1 kOhm
10 kOhm
50 kOhm

TAPER
Linear
Linear
Linear

REFERENCE
575SX1A48S102SS
574SX1A48S103SS
574SX1A48S503SS

OPTIONS
Slotted Shaft
RESISTANCE
100 Ohm
500 Ohm
1 kOhm
5 kOhm
10 kOhm
100 kOhm
500 kOhm
1 MOhm

www.honeywell.com/sensing

TAPER
Linear
Linear
Linear
Linear
Linear
Linear
Linear
Linear

REFERENCE
590SX1N56S101SP
590SX1N56S501SP
590SX1N56S102SP
590SX1N56S502SP
590SX1N56S103SP
590SX1N56S104SP
590SX1N56S504SP
590SX1N56S105SP

107

LINEAR AND ROTARY POSITION

Clarostat Rotary Potentiometers and Position Transducers (continued)
380 Series, Industrial potentiometer

The 380 Series “Quiet One” is a 2-watt conductive plastic potentiometer
offering superior dynamic noise and a long rotational life. It meets MIL-R-94
specifications where applicable.
Approvals:
Power rating:
Element type:
Terminal type:
Shaft:
Body:
Electrical taper:
Operating temperature:
Working voltage:
Linearity:
Total resistance tolerance:

MIL-R-94
2.0 W max.
Conductive plastic
Solder lug
Slotted
27,79 mm (1.094 in) Ø
Linear
-55 °C to 120 °C (-67 °F to 248 °F)
500 Vdc
± 5%
± 10% (up to 500 kOhms)
± 20 % (1 MOhm and over)
100,000
312° ± 3°

Rotational cycles:
Mechanical rotation:

OPTIONS
C1: 2.0 in (50,8 mm) Round Shaft;
0.375 in (9,5 mm) L bushing

27,78

[ 1.09 ]
14,27

[ 0.56 ]
C2

15,87

[ 0.625 ]

RESISTANCE
250 Ohm
1 kOhm
5 kOhm
10 kOhm
25 kOhm
50 kOhm
100 kOhm
250 kOhm
1 MOhm

REFERENCE
380C2250
380C21000
380C25000
380C210K
380C225K
380C250K
380C2100K
380C2250K
380C21MEG

C3: 0.875 in (22,23 mm) shaft;
0.375 in (9,5 mm) L bushing

50,8

[ 2.0 ]

C2: 0.625 in (15,88 mm) screwdriver slotted shaft;
0.5 in (12,7 mm) L locking bushing

6,35
[ .025 ]

27,78

[ 1.09 ]
14,27

C1
RESISTANCE
100 Ohm
250 Ohm
500 Ohm
1 kOhm
1.5 kOhm
2 kOhm
2.5 kOhm
5 kOhm
10 kOhm
15 kOhm
20 kOhm
25 kOhm
50 kOhm
100 kOhm
200 kOhm
250 kOhm
500 kOhm
1 MOhm

108

27,78

[ 0.56 ]

[ 1.09 ]

22,23

[ 0.875 ]
REFERENCE
380C1100
380C1250
380C1500
380C11000
380C11500
380C12000
380C12500
380C15000
380C110K
380C115K
380C120K
380C125K
380C150K
380C1100K
380C1200K
380C1250K
380C1500K
380C11MEG

14,27

C3
RESISTANCE
100 Ohm
250 Ohm
500 Ohm
1 kOhm
2 kOhm
2.5 kOhm
5 kOhm
10 kOhm
25 kOhm
50 kOhm
100 kOhm
150 kOhm
200 kOhm
250 kOhm
500 kOhm
1 MOhm
5 MOhm

www.honeywell.com/sensing

[0.56 ]
REFERENCE
380C3100
380C3250
380C3500
380C31000
380C32000
380C32500
380C35000
380C3310K
380C325K
380C350K
380C3100K
380C3150K
380C3200K
380C3250K
380C3500K
380C31MEG
380C35MEG

LINEAR AND ROTARY POSITION

RV4 MIL Series potentiometer

The RV4 is a dual-marked potentiometer with all the fine features of the
380 Series in a more economical package. It is built in strict accordance with
MIL-R-94.
Approvals:
Power rating:
Element type:
Terminal type:
Shaft:
Body:
Electrical taper:
Operating temperature:
Working voltage:
Linearity:
Rotational cycles:
Mechanical rotation:

MIL-R-94
2.0 W max.
Conductive plastic
Solder lug
Slotted
27,79 mm (1.094 in) Ø
Linear
-55 °C to 120 °C (-67 °F to 248 °F)
500 Vdc
± 5%
25,000
312° ± 3°

OPTIONS
Locking Bushing

Standard Bushing,
0.875 in (22,23 mm) shaft length

RESISTANCE
100 Ohm
250 Ohm
500 Ohm
1 kOhm
2.5 kOhm
5 kOhm
10 kOhm
25 kOhm
50 kOhm
100 kOhm
250 kOhm
500 kOhm
750 Kohm
1 MOhm
5 MOhm

TOLERANCE
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 20%

REFERENCE
RV4NAYSD101A
RV4NAYSD251A
RV4NAYSD501A
RV4NAYSD102A
RV4NAYSD252A
RV4NAYSD502A
RV4NAYSD103A
RV4NAYSD253A
RV4NAYSD503A
RV4NAYSD104A
RV4NAYSD254A
RV4NAYSD504A
RV4NAYSD754A
RV4NAYSD105A
RV4NAYSD505B

RESISTANCE
100 Ohm
250 Ohm
500 Ohm
1 kOhm
2.5 kOhm
5 kOhm
10 kOhm
25 kOhm
50 kOhm
100 kOhm
250 kOhm
500 kOhm
750 kOhm
1 MOhm
5 MOhm

www.honeywell.com/sensing

TOLERANCE
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 20%

REFERENCE
RV4LAYSA101A
RV4LAYSA251A
RV4LAYSA501A
RV4LAYSA102A
RV4LAYSA252A
RV4LAYSA502A
RV4LAYSA103A
RV4LAYSA253A
RV4LAYSA503A
RV4LAYSA104A
RV4LAYSA254A
RV4LAYSA504A
RV4LAYSA754A
RV4LAYSA105A
RV4LAYSA505B

109

LINEAR AND ROTARY POSITION

Clarostat Rotary Potentiometers and Position Transducers (continued)
RV6/392M MIL Series potentiometer

RV6/392M Series are economical potentiometers designed to meet wave
soldering applications for mounting PC boards. They meet flow solderability
and washability test requirements, and MIL-R-94 standard apply.
Approvals:
Power rating:
Element type:
Terminal type:
Shaft:
Body:
Electrical taper:
Operating temperature:
Working voltage:
Linearity:
Total resistance tolerance:
Rotational cycles:
Mechanical rotation:

MIL-R-94
0.5 W max.
Conductive plastic
Solder hook
Slotted
12,7 mm (0.5 in) Ø
Linear
-40 °C to 120 °C (-40 °F to 248 °F)
350 Vdc
± 5%
± 10% (up to 500 kOhms)
± 20 % (1 MOhm and over)
50,000
295° ± 5°

3,18
[0.125] Dia.

12,7 [0.5]
Dia.

Locking Bushing Type
Type
RV6

110

Bushing Shaft
Length Length
6,35
22,23
0.25
0.875

Standard Bushing, 6,35 mm (0.25 in) L;
0.875 in (22,23 mm) shaft length
RESISTANCE
100 Ohm
250 Ohm
500 Ohm
1 kOhm
2.5 kOhm
5 kOhm
10 kOhm
25 kOhm
50 kOhm
100 kOhm
250 kOhm
500 kOhm
1 MOhm

REFERENCE
RV6NAYSD101A
RV6NAYSD251A
RV6NAYSD501A
RV6NAYSD102A
RV6NAYSD252A
RV6NAYSD502A
RV6NAYSD103A
RV6NAYSD253A
RV6NAYSD503A
RV6NAYSD104A
RV6NAYSD254A
RV6NAYSD504A
RV6NAYSD105A

Locking Bushing, 12,7 mm (0.50 in) L;
0.625 in (15,88 mm) shaft length

15,88 ± 0,76
[0.625 ± 0.03]
12,7 ± 0,5
[0.5 ± 0.02]

OPTIONS

RV6/392M

RESISTANCE
100 Ohm
250 Ohm
500 Ohm
1 kOhm
2.5 kOhm
5 kOhm
10 kOhm
25 kOhm
50 kOhm
100 kOhm
250 kOhm
500 kOhm
1 MOhm

www.honeywell.com/sensing

REFERENCE
RV6LAYSA101A
RV6LAYSA251A
RV6LAYSA501A
RV6LAYSA102A
RV6LAYSA252A
RV6LAYSA502A
RV6LAYSA103A
RV6LAYSA253A
RV6LAYSA503A
RV6LAYSA104A
RV6LAYSA254A
RV6LAYSA504A
RV6LAYSA105A

LINEAR AND ROTARY POSITION

53 Series potentiometer

585 Series, Commercial potentiometer

The 53 Series has all the fine features of the Series 380 in a more economical
package. It is available with a 50,8 mm [2.0 in] long shaft.

Our Series 585 offers a robust construction in a low-cost commercial
package, using carbon composition elements and a metal shaft and bushing.

Power rating:
Element type:
Terminal type:
Shaft:
Body:
Electrical taper:
Operating temperature:
Working voltage:
Linearity:
Rotational cycles:
Mechanical rotation:

Power rating:
0.05 W max. @ 40 °C
Element type:
Carbon composition
Terminal type:
3 in-line
Bushing:
M 7 x 0.75 thread, 7 mm L
Shaft:
6,0 mm (0.24 in) Ø by 25,0 mm (0.98 in) L
Flatted shaft: 12,0 mm (0.47 in) long by 4,5 mm (0.18 in) D standard; round
end available
Body:
9,5 mm (0.37 in) square
Operating temperature:
-55 °C to 120 °C (-67 °F to 248 °F)
Resistance tolerance:
± 20%
Rotational cycles:
10,000
Mechanical rotation:
300°

2.0 W max.
Conductive plastic
Solder lug
Slotted, 50,8 mm (2.0 in) L
27,79 mm (1.094 in) Ø
Linear
-55 °C to 120 °C (-67 °F to 248 °F)
500 Vdc
± 5%
25,000
312° ± 3°

OPTIONS
Standard Bushing, 2.0 in (50,8 mm) shaft length
RESISTANCE
100 Ohm
250 Ohm
500 Ohm
1 kOhm
2.5 kOhm
5 kOhm
10 kOhm
25 kOhm
50 kOhm
100 kOhm
150 kOhm
250 kOhm
500 kOhm
750 kOhm
1 MOhm
2.5 MOhm
5 MOhm

TOLERANCE
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 20%
± 20%
± 20%

REFERENCE
53C1100
53C1250
53C1500
53C11K
53C12500
53C15K
53C110K
53C125K
53C150K
53C1100K
53C1150K
53C1250K
53C1500K
53C1750K
53C11MEG
53C12.5MEG
53C15MEG

OPTIONS
Linear taper
RESISTANCE
1 kOhm
5 kOhm
10 kOhm
1 kOhm
5 kOhm
10 kOhm

SECTION
Single
Single
Single
Double
Double
Double

REFERENCE
585SX4Q25F102SP
585SX4Q25F502SP
585SX4Q25F103SP
585DX4Q25F102SP
585DX4Q25F502SP
585DX4Q25F103SP

SECTION
Single
Single
Single

REFERENCE
585SX4Q25F102ZP
585SX4Q25F502ZP
585SX4Q25F103ZP

Audio taper
RESISTANCE
1 kOhm
5 kOhm
10 kOhm

www.honeywell.com/sensing

111

LINEAR AND ROTARY POSITION

Encoders
510 Series , Mechanical

600 Series, Optical

The 510 Series controls are manually operated, rotary, mechanical encoders
that provide a two-bit gray code for relative reference applications and a fourbit gray code for absolute electrical reference applications. The “L” channel
leads the “R” channel by 90° electrically in the CW position. It features
continuous electrical travel and has a rotational life of more than 100,000
shaft revolutions with a positive detent feel.

The 600 Series controls are manually operated, rotary, optical encoders that
output two square waves in quadrature at a rate of 128 pulse per channel per
revolution as a standard with other resolutions down to 60 pulses available.
The outputs are TTL compatible. PC terminals or cable leads are available.

This series is small-sized, 21,08 mm2 by 8,71 mm deep (0.83 in2 x 0.343 in)
long and commonly used in limited-space, panel-mounted applications where
the need for costly, front-panel displays can be completely eliminated. Digital
gray-code outputs eliminate the need for
A/D converters.

Pulses per revolution:
128
Supply voltage:
5.0 V
Body:
34,93 mm (1.375 in) Ø
Shaft:
6.35 mm [0.25 in] dia by 22.23 mm [0.875] long
Bushing:
9,52 mm [0.375 in] dia by 9,52 mm [0.375 in] long
Operating temperature:
-40 °C to 65 °C (-40 °F to 149 °F)
Revolutions:
10 million

Bushing:
9,52 mm (0.375 in) Ø x 6,35 mm (0.25 in) L
Shaft:
Flatted, 6,35 mm (0.25 in) Ø x 19,05 mm (0.75 in) L
Body:
21,08 mm (0.830 in) square
Operating temperature:
-40 °C to 105 °C (-40 °F to 221 °F)
Rotational cycles:
100,000

1,91 [0.075]

17,5 [0.69]
0,64 x 3,05
12,2 [0.48]

“A”

12 34

[0.025 x 0.012]

1,27 typ.
[0.05 Typ.]

OPTIONS
Series 600
TERMINATION
177,8 mm (7.0 in) long cable
PC terminals exiting side
PC terminals exiting rear
177,8 mm (7.0 in) long cable with connector

OPTIONS
Vertical Mount, PC Terminals/bent back
GREY CODE OPTIONS
2 bit/4 cycles
2 bit/6 cycles
2 bit/9 cycles
4 bit/16 cycles

REFERENCE
510E1A48F204PC
510E1A48F206PC
510E1A48F209PC
510E1A48F416PC

Horizontal Mount, PC Terminals/straight
GREY CODE OPTIONS
2 bit/4 cycles
2 bit/6 cycles
2 bit/9 cycles
4 bit/16 cycles

REFERENCE
510E1A48F204PB
510E1A48F206PB
510E1A48F209PB
510E1A48F416PB

Brackets
MOUNTING DIRECTION
Vertical
Horizontal

112

REFERENCE
510VBKT
510HBKT

www.honeywell.com/sensing

REFERENCE
600EN-128-CBL
600EN-128-B66
600EN-128-C24
600EN-128-CN1

LINEAR AND ROTARY
OPTO POSITION
SENSORS

Slotted Optical Switches
S-180 Series

S-510 Series

The S-180 Series consists of a gallum arsenide IRED and silicon
phototransistor mounted in a rigid one-piece polycarbonate housing. All
electrical options are available with either PCB mount or 457,0 mm
(18.0 in) minimum length wire termination (26 AWG type UL 1429)

The S-510 Series consists of a gallum arsenide IRED and silicon
phototransitor mounted in a small injection-molded housing. An IR-opaque
housing is offered for applications where high levels of ambient infrared
radiation may be present and an IR-transparent housing for applications
requiring protection from dust and dirt in the apertures. This series is also
available with 305,0 mm (12.0 in) minimum length flexible wire leads.

Operating temperature:
IRED continuous forward current:
IRED peak forward current:
IRED reverse voltage:
IRED power dissipation:
Sensor collector-emitter voltage:
Sensor emitter-collector voltage:
Sensor power dissipation:

-40 °C to 85 °C (-40 °F to 185 °F)
50 mA
3A
3V
100 mW
30 V
5V
100 mW

Operating temperature:
IRED continuous forward current:
IRED peak forward current:
IRED reverse voltage:
IRED power dissipation:
Sensor collector-emitter voltage:
Sensor emitter-collector voltage:
Sensor power dissipation:

-40 °C to 85 °C (-40 °F to 185 °F)
50 mA
3A
3V
100 mW
30 V
5V
100 mW

OPTIONS
PCB Mount
VCE(sat)
0.4 V max @ IF = 20 mA, IC = 0.4 mA
0.4 V max @ IF = 10 mA, IC = 0.8 mA
0.4 V max @ IF = 20 mA, IC = 2.0 mA

IL
0.5 mA min @ IF = 20 mA and VCE = 5 V
1.0 mA min @ IF = 10 mA and VCE = 5 V
2.0 mA min @ IF = 20 mA and VCE = 5 V

REFERENCE
S-180-A55
S-180-B55
S-180-C55

IR-opaque housing
TERMINATION
PC Board mount
Wire
PC Board mount
Wire

Wire Leads
VCE(sat)
0.4 V max @ IF = 20 mA, IC = 0.4 mA
0.4 V max @ IF = 10 mA, IC = 0.8 mA
0.4 V max @ IF = 20 mA, IC = 2.0 mA

OPTIONS

IL
0.5 mA min @ IF = 20 mA and VCE = 5 V
1.0 mA min @ IF = 10 mA and VCE = 5 V
2.0 mA min @ IF = 20 mA and VCE = 5 V

REFERENCE
S-180-A55W
S-180-B55W
S-180-C55W

ELECTRICAL SELECTION
A
A
B
B

REFERENCE
S-510-A
S-510-AW
S-510-B
S-510-BW

IR-transparent housing
TERMINATION
PC Board mount
Wire
PC Board mount
Wire

ELECTRICAL SELECTION
A
A
B
B

REFERENCE
S-511-A
S-511-AW
S-511-B
S-511-BW

PARAMETER
A

IL
0.5 mA @ IF = 20 mA and VCE = 5 V
1.0 mA @ IF = 35 mA and VCE = 5V

VCE(sat)
0.4 V max @ IF = 20 mA and IC = 0.25 mA
0.4 V max @ IF = 35 mA and IC = 0.50 mA

B

1.0 mA @ IF = 20 mA and VCE = 5 V
2.0 mA @ IF = 35 mA and VCE = 5V

0.4 V max @ IF = 20 mA and IC = 0.50 mA
0.4 V max @ IF = 35 mA and IC = 1.0 mA

www.honeywell.com/sensing

113

LINEARSENSORS
AND ROTARY POSITION
OPTO

Slotted Optical Switches (continued)
OPTIONS

S-860/870 Series

IR Transparent; 5,59 mm (0.220 in) Lead spacing;
IRED aperture, 1,27 mm (0.05 in)

The S-860/870 family of optical switches offers the designer the most flexible
semi-custom specification available in commercial optoelectronics. Electrical,
optical and mechanical parameters may be specified allowing the use of this
standard product in many applications that would otherwise have to be
custom designed.
Operating temperature:
IRED continuous forward current:
IRED peak forward current:
IRED reverse voltage:
IRED power dissipation:
Sensor collector-emitter voltage:
Sensor emitter-collector voltage:
Sensor power dissipation:

-25 °C to 85 °C (-13 °F to 185 °F)
50 mA
3A
3V
100 mW
30 V
5V
100 mW

ELECTRICAL PARAMETER
A
B
C
A
B
C
A
B
C
A
B
C

MOUNTING/SENSOR
No Tabs/0,25 mm (0.01 in)
No Tabs/0,25 mm (0.01 in)
No Tabs/0,25 mm (0.01 in)
No Tabs/1,27 mm (0.05 in)
No Tabs/1,27 mm (0.05 in)
No Tabs/1,27 mm (0.05 in)
2 Tabs/0,25 mm (0.01 in)
2 Tabs/0,25 mm (0.01 in)
2 Tabs/0,25 mm (0.01 in)
2 Tabs/1,27 mm (0.05 in)
2 Tabs/1,27 mm (0.05 in)
2 Tabs/1,27 mm (0.05 in)

REFERENCE
S-865-N51
S-866-N51
S-867-N51
S-865-N55
S-866-N55
S-867-N55
S-865-T51
S-866-T51
S-867-T51
S-865-T55
S-866-T55
S-867-T55

IR Transparent; 8,13 mm (0.320 in) Lead spacing;
IRED aperture, 1,27 mm (0.05 in)
ELECTRICAL PARAMETER
A
B
C
A
B
C
A
B
C
A
B
C

MOUNTING/SENSOR
No Tabs/0,25 mm (0.01 in)
No Tabs/0,25 mm (0.01 in)
No Tabs/0,25 mm (0.01 in)
No Tabs/1,27 mm (0.05 in)
No Tabs/1,27 mm (0.05 in)
No Tabs/1,27 mm (0.05 in)
2 Tabs/0,25 mm (0.01 in)
2 Tabs/0,25 mm (0.01 in)
2 Tabs/0,25 mm (0.01 in)
2 Tabs/1,27 mm (0.05 in)
2 Tabs/1,27 mm (0.05 in)
2 Tabs/1,27 mm (0.05 in)

REFERENCE
S-860-N51
S-861-N51
S-862-N51
S-860-N55
S-861-N55
S-862-N55
S-860-T51
S-861-T51
S-862-T51
S-860-T55
S-861-T55
S-862-T55

IR Opaque; 5,59 mm (0.220 in) Lead spacing;
IRED aperture, 1,27 mm (0.05 in)
ELECTRICAL PARAMETER
A
B
C
A
B
C
A
B
C
A
B
C

MOUNTING/SENSOR
No Tabs/0,25 mm (0.01 in)
No Tabs/0,25 mm (0.01 in)
No Tabs/0,25 mm (0.01 in)
No Tabs/1,27 mm (0.05 in)
No Tabs/1,27 mm (0.05 in)
No Tabs/1,27 mm (0.05 in)
2 Tabs/0,25 mm (0.01 in)
2 Tabs/0,25 mm (0.01 in)
2 Tabs/0,25 mm (0.01 in)
2 Tabs/1,27 mm (0.05 in)
2 Tabs/1,27 mm (0.05 in)
2 Tabs/1,27 mm (0.05 in)

REFERENCE
S-875-N51
S-876-N51
S-877-N51
S-875-N55
S-876-N55
S-877-N55
S-875-T51
S-876-T51
S-877-T51
S-875-T55
S-876-T55
S-877-T55

IR Opaque; 8,13 mm (0.320 in) Lead spacing; IRED
aperture, 1,27 mm (0.05 in)

PARAMETER
A

IL
0.5 mA @ IF = 20 mA and VCE = 5 V

VCE(sat)
0.4 V max @ IF = 20 mA and IC = 0.4 mA

B

1.0 mA @ IF = 10 mA and VCE = 5 V

0.4 V max @ IF = 10 mA and IC = 0.8 mA

C

2.0 mA @ IF = 20 mA and VCE = 0.4 V

0.4 V max @ IF = 20 mA and IC = 2.0 mA

114

ELECTRICAL PARAMETER
A
B
C
A
B
C
A
B
C
A
B
C

www.honeywell.com/sensing

MOUNTING/SENSOR
No Tabs/0,25 mm (0.01 in)
No Tabs/0,25 mm (0.01 in)
No Tabs/0,25 mm (0.01 in)
No Tabs/1,27 mm (0.05 in)
No Tabs/1,27 mm (0.05 in)
No Tabs/1,27 mm (0.05 in)
2 Tabs/0,25 mm (0.01 in)
2 Tabs/0,25 mm (0.01 in)
2 Tabs/0,25 mm (0.01 in)
2 Tabs/1,27 mm (0.05 in)
2 Tabs/1,27 mm (0.05 in)
2 Tabs/1,27 mm (0.05 in)

REFERENCE
S-870-N51
S-871-N51
S-872-N51
S-870-N55
S-871-N55
S-872-N55
S-870-T51
S-871-T51
S-872-T51
S-870-T55
S-871-T55
S-872-T55

LINEAR AND ROTARY
OPTO POSITION
SENSORS

S-800W Series, Wide gap

The S-800W Series of wide gap slotted switches consists of a gallium arsenide
IRED and silicon phototransistor in an injection-molded housing. The output
current range options allow the design engineer the flexibility to choose from
three current minimums to best solve application requirements.
Operating temperature:
IRED continuous forward current:
IRED peak forward current:
IRED reverse voltage:
IRED power dissipation:
Sensor collector-emitter voltage:
Sensor emitter-collector voltage:
Sensor power dissipation:

-40 °C to 80 °C (-40 °F to 176 °F)
50 mA
3A
3V
100 mW
30 V
5V
100 mW

OPTIONS
IL
500 uA min @ VCE = 10 V & IF = 20 mA
1.0 mA min @ VCE = 5 V & IF = 10 mA
1.8 mA min @ VCE = 0.6 V & IF = 20 mA

VCE(sat)
0.4 V max @ IC = 250 uA & IF = 20 mA
0.4 V max @ IC = 500 uA & IF = 20 mA
0.4 V max @ IC = 1.8 mA & IF = 20 mA

REFERENCE
S-800W
S-801W
S-802W

www.honeywell.com/sensing

115

LINEAR AND ROTARY POSITION

Blank page

116

www.honeywell.com/sensing

ULTRASONIC DISTANCE SENSORS

Ultrasonic Distance Sensors
Ultrasonic sensing systems offer no-touch distance measurements to an
accuracy of 1 mm through dust, smoke and vapour, in areas of high noise
level, and with all types of target materials, shapes and colours, with sensing
ranges from 100 mm up to 6000 mm.

High performance no-touch position sensing
Increased reliability, no contamination. Honeywell ultrasonic sensors operate
by exciting an acoustic transducer with voltage pulses, causing the transducer
to vibrate ultrasonically. These oscillations are directed at a target and by
measuring the time for the echo to return to the transducer, the distance may
be calculated. This measurement technique in no way interferes with the
object - it does not contaminate the target, nor does it affect the position. And
being no-touch, there are no mechanical linkages to wear out.

Ultrasonic
Factory noise does not affect operation because the operating frequency is
well above the frequency of ambient sound. And because sound is used, air
pressure, humidity and airborne contamination have little effect on accuracy;
target shape, material and colour are also not critical.

Working method
The sensors work with an ultrasonic transducer used for both transmitting
and receiving. In each cycle, ultrasonic pulses will be transmitted. The pulses
are then reflected back from the target, and received by the sensor. By means
of the temperature compensated measurement of the elapsed time of the
acoustic signal, the target distance is determined, with a high degree of
accuracy. The resulting measurement can be output either as an analogue or a
digital signal.

Reflective properties
Target object distance

Time
0

T/2

T

Almost all materials and targets reflect sound, and can therefore be detected.
Only sound-absorbing materials such as cotton wool, or foam rubber are
either difficult or impossible to detect. Certain materials, such as textiles,
weaken the ultrasonic signals, as a result of which the maximum sensing
distance is less than half of the nominal value.

Target shape and surface
Time

Voltage
Figure 1 shows the elapsed time of the acoustic pulse. The diagram shows how the pulse
travels from the transducer to the target, is reflected at time T/2, and reaches the
transducer at time T. Below is a diagram of the voltage at the ultrasonic transducer.
Elapsed time T is directly proportional to object distance a. a = cT/2, where c is the
velocity of sound.

Application criteria
The maximum sensing range depends on a number of factors such as target
shape, surface, inclination to the beam axis, surface composition and
environmental influences. The range values included in this catalogue are
based on a target made of flat, sound-reflecting material at 25°C and still air,
placed vertical to the beam axis.

All object shapes and surfaces can be measured using ultrasonic sensors, up
to the maximum distance at which a sufficient echo reaches the sensor.
Cylindrical, conical and small objects reduce the measuring range.

Inclination to beam angle
If a smooth, flat target is inclined at more than half of the nominal beam angle
to the normal beam axis (e.g. 5°), the echo is deflected so far that, under
certain conditions, no signal is received by the sensor (see Figure 2 overleaf).
At shorter target distances, the target can be inclined up to the beam (e.g.
10°) from the beam axis. In the case of targets with a rough surface, the
acoustic beam is reflected diffusely. The angle of inclination to the beam may,
under certain circumstances, be up to 50°, but the maximum sensing
distance is reduced.

www.honeywell.com/sensing

117

ULTRASONIC DISTANCE SENSORS

10 cm
< 5°
< 5°
10 cm

Sn

Target

(cm) 5
3
1
-1
-3
-5
0

200

400

Output

1400 (mm)

Switching point in
backwards direction

10 cm

Sn

800 1000 1200
Repeatability
Switching point in
forwards direction

10 cm

< 5°
< 5°

600

Hysteresis

Figure 2: Effect of target inclination on the measurement

Figure 4: Repeatability and hysteresis

Environmental influences

Mutual interference

The velocity of sound in air is temperature-dependent, and increases at a rate
of 0.18 %/°C. Honeywell ultrasonic distance sensors have their own
temperature transducer, which adjusts both the clock frequency of the elapsed
time counter and the carrier frequency. Major temperature fluctuations within
the measuring path can, however, lead to sound dispersion and refraction,
which disturb the measuring result and limit the stability of the measurement
(Figure 3). Air streams, turbulence and air layers of different densities can, in
certain conditions, attenuate or deflect the echo to such an extent that the
sensor cannot detect it. On the other hand, air humidity and normal
atmospheric air pressure fluctuations have virtually no influence on the
measurements.

Despite pulse coding, if several sensors are used simultaneously in a single
application, mutual interference can occur. This phenomenon will, however,
only arise if, as a result of the inclination of the object, or the positioning of
two sensors opposite one another, false echo signals can be received. By
using the inhibitor input, maintaining minimum distances or restricting the
beam angle with a focusing reflector, the problem can be almost entirely
avoided.

cold
10 cm

Synchronisation
The majority of Honeywell ultrasonic distance sensors can be very easily
synchronised by interconnecting the appropriate inputs or connecting them
with an external synchronisation unit. The transmission of the acoustic pulses
then occurs simultaneously. This makes it possible to use the sensors for
applications in which the ultrasonic transducers are facing each other, while
still avoiding mutual interference.

Protective measures
10 cm

Sn
warm

10 cm

Sn

10 cm

Figure 3: Effect of warm air turbulence on the measurement

All sensors are protected against water and dust, according to the DIN
standard IP 65. The transducer is coated with silicone rubber or epoxy, but it
can be attacked by aggressive acid or caustic atmospheres. It is also
necessary to ensure that the transducer face remains clear of liquid or solid
deposits, which could limit the performance of the sensor. Drops of water may
be deposited on the transducer surface, as a result of condensation. These
could severely reduce the sensor range. Also because of the risk of icing up,
and because sensors detect raindrops, the suitability of these sensors for
outdoor use, despite the protective measures, is limited.

Electrical interference
Repeatability
All information concerning repeatability and hysteresis in this data sheet is
valid for axial target movements (Figure 4). If a target approaches the sensor
from a distance, the output switches at the set value ± the given repeatability.
If the target moves further away from the sensor, the output switches back
into its original condition, at a distance which is equal to the sum of the
setpoint and the given hysteresis ± the repeatability. If a target moves laterally
into the acoustic beam, the echo energy increases. If the measurement
threshold of the sensor is reached, the output becomes active. This threshold
depends on the target properties and its distance from the sensor. The
position can only be determined experimentally.

All Honeywell ultrasonic sensors are protected against reverse polarity, short
circuits, overloads and voltage spikes. Special protective circuitry makes the
sensor almost entirely immune to electromagnetic and radio frequency
interference. However, unstable measurements may arise if the sensor is
placed in the vicinity of strong electrical fields. In such cases, the
interconnection cables should be screened as far as possible, or separated
from power cables. The use of regulated power supplies with mains filters,
and limiting the maximum cable length to 50 metres can also offer possible
solutions. All sensors are CE marked.

Alignment aid
The majority of Honeywell ultrasonic distance sensors have an LED, the
output intensity of which is proportional to the ultrasonic echo received. The
brighter the LED, the better aligned the sensor.
Please contact your nearest Honeywell office for details of other models
available.

118

www.honeywell.com/sensing

ULTRASONIC DISTANCE SENSORS

940/947 Series
Compact,
microprocessor
controlled with
internal temperature
compensation

The new 940/947 Series is microprocessor controlled, can be set up quickly and are fitted with epoxy
transducers. All the housings are sealed to IP67. The retroreflective versions allow detection of any kind
of target without any dead zone. They work with a reflector target.

OPTIONS
1 adjustable switching output
PNP NO

Analogue voltage output, 0-10 V

Retroreflective, PNP NO

Max. sensing distance:
600 mm
Min. sensing distance:
100 mm
Beam angle:
8°
Repeatability:
0,2 % or ±2 mm
Response time:
50 ms
Supply voltage:
18 to 30 V
Sealing:
IP67
Housing:
M18 x 1 mm plastic (PBTB)
Termination:
Preleaded 2 m

Max. sensing distance:
600 mm
Min. sensing distance:
0 mm
Min. reflector distance:
300 mm
Beam angle:
8°
Switching frequency:
25 Hz
Supply voltage:
18 to 30 V
Sealing:
IP67
Housing:
M18 x 1 mm plastic (PBTB)
Termination:
Preleaded 2 m

REFERENCE
947-F4Y-2D-1C0-300E

REFERENCE
947-FSY-2D-001-300E

Max. sensing distance:
1500 mm
Min. sensing distance:
200 mm
Beam angle:
8°
Repeatability:
0,3 % or ±1 mm
Switching frequency:
8 Hz
Supply voltage:
18 to 30 V
Sealing:
IP67
Housing:
M18 x 1 mm plastic (PBTB)

Max. sensing distance:
1500 mm
Min. sensing distance:
200 mm
Beam angle:
8°
Repeatability:
0,2 % or ±2 mm
Response time:
100 ms
Supply voltage:
18 to 30 V
Sealing:
IP67
Housing:
M18 x 1 mm plastic (PBTB)
Termination:
Preleaded 2 m

Max. sensing distance:
1500 mm
Min. sensing distance:
0 mm
Min. reflector distance:
400 mm
Beam angle:
8°
Switching frequency:
8 Hz
Supply voltage:
18 to 30 V
Sealing:
IP67
Housing:
M18 x 1 mm plastic (PBTB)
Termination:
Preleaded 2 m

REFERENCE
940-F4Y-2D-001-180E

REFERENCE
947-F4Y-2D-1C0-180E

REFERENCE
947-FSY-2D-001-180E

Max. sensing distance:
3000 mm
Min. sensing distance:
300 mm
Beam angle:
8°
Repeatability:
0,3% or ±1 mm
Switching frequency:
1 Hz
Supply voltage:
18 to 30 V
Sealing:
IP67
Housing:
M30 x 1,5 mm plastic (PBTB)
Termination:
Preleaded 2 m

Max. sensing distance:
2500 mm
Min. sensing distance:
300 mm
Beam angle:
8°
Repeatability:
0,2 % or ±2 mm
Response time:
90 ms
Supply voltage:
18 to 30 V
Sealing:
IP67
Housing:
M30 x 1,5 mm plastic (PBTB)
Termination:
Preleaded 2 m

Max. sensing distance:
2500 mm
Min. sensing distance:
0 mm
Min. reflector distance:
600 mm
Beam angle:
8°
Switching frequency:
1 Hz
Supply voltage:
18 to 30 V
Sealing:
IP67
Housing:
M30 x 1,5 mm plastic (PBTB)
Termination:
Preleaded 2 m

REFERENCE
940-F4Y-2D-001-300E

125 ±0,5

125 ±0,5

REFERENCE
947-T4Y-2D-001-130E

3,5

90 ±0,5

M30 x 1,5

90 ±0,5

M30 x 1,5

3,5

REFERENCE
947-T4Y-2D-1C0-130E

www.honeywell.com/sensing

125 ±0,5
3,5

90 ±0,5

M30 x 1,5

Max. sensing distance:
600 mm
Min. sensing distance:
100 mm
Beam angle:
8°
Repeatability:
0,3 % or ±1 mm
Switching frequency:
25 Hz
Supply voltage:
18 to 30 V
Sealing:
IP67
Housing:
M18 x 1 mm plastic (PBTB)

REFERENCE
947-TSY-2D-001-130E

119

ULTRASONIC DISTANCE SENSORS

944 Series
Teach in,
Analogue and
2 switching outputs

948 Series
Thru scan, 2 part

The new 944 series are microprocessor controlled and fully programmable by teach-in, with the simple
pressing of a button. They offer analogue and two switching outputs through a standard M-12, 5-pin
connector. All the models are IP67 with chemical-resistant body and epoxy face. Parameters are stored in
non-volatile memory.

OPTIONS
2 switching outputs PNP NO
Analogue output 0-10 volts

2 switching outputs PNP NO
Analogue output 4-20 mA

Beam angle:
Repeatability :
Supply voltage:
Sealing:
Housing:

Beam angle:
Repeatability :
Supply voltage:
Sealing:
Housing:

8°
0,4 % or ±2 mm
19 to 30 V
IP67
M30 x 1,5 mm plastic (PBTB)

Max. sensing distance:
Min. sensing distance:
Switching frequency:

3500 mm
350 mm
0,8 Hz

2000 mm
250 mm
1 Hz

REFERENCE

Max. sensing distance:
Min. sensing distance:
Switching frequency:
REFERENCE

Max. sensing distance:
Min. sensing distance:
Switching frequency:

3500 mm
350 mm
0,8 Hz

Max. sensing distance:
Beam angle:
Supply voltage:
Sealing:
Housing:

Max. sensing distance:
Min. sensing distance:
Switching frequency:

1500 mm
150 mm
1 Hz
944-T4V-2D-1C1-200E

350 mm
60 mm
8 Hz

Max. sensing distance:
Min. sensing distance:
Switching frequency:

2000 mm
250 mm
1 Hz

2,0
(0.08)

1500 mm
150 mm
1 Hz

12,0
(0.47)

2000
(78.74)

20,0
(0.79)

6,5
(0.04)
17,0
(0.67)

5,5
(0.22)

10,0
(0.39)

3,2
(0.13)

REFERENCE
944-T4V-2D-1D1-200E

Max. sensing distance:
Min. sensing distance:
Switching frequency:

350 mm
60 mm
8 Hz

944-T4V-2D-1C1-300E

30,0
(1.18)

2,0
(0.08)

10,0
(0.39)

SWITCHING
PNP/NO
NPN/NO
PNP/NC
NPN/NC

www.honeywell.com/sensing

12,0
(0.47)

2000
(78.74)

20,0
(0.79)

REFERENCE
944-T4V-2D-1D1-300E

120

300 mm
8°
18 to 30 V
IP67
Plastic rectangular

30,0
(1.18)

REFERENCE
944-T4V-2D-1D1-180E

REFERENCE
944-T4V-2D-1C1-180E

Max. sensing distance:
Min. sensing distance:
Switching frequency:

11,2

1 switching output
NO/NC; NPN/PNP

REFERENCE
944-T4V-2D-1D1-130E

REFERENCE
944-T4V-2D-1C1-130E

Max. sensing distance:
Min. sensing distance:
Switching frequency:

3,5

M30 x 1,5

11,2

M30 x 1,5

3,5

8°
0,4 % or ±2 mm
19 to 30 V
IP67
M30 x 1,5 mm plastic (PBTB)

The 948 series perform presence measurement by
using an ultrasonic beam. The 948 series is one of
the smallest ultrasonic scan through devices in the
world. It is especially suited for food and beverage
applications, in particular bottle counting. Easy to
install, the 948 series is suitable when space is at a
premium.

6,5
(0.04)
17,0
(0.67)

5,5
(0.22)

3,2
(0.13)

REFERENCE
948-HSY-2D-001-300E
948-HSY-2D-002-300E
948-HSY-2D-003-300E
948-HSY-2D-004-300E

ULTRASONIC DISTANCE SENSORS

942-T Series
with Digital Link,
Analogue and 2
switching outputs

942 Series
Compact
programmable
30 mm diameter
sensor

The new, plastic housing (PBTB), programmable 942-T series provides flexibility to customers through
independent analogue and 2 switching outputs to suit most of the applications. The programming is easy
to do using Window™ based software.

OPTIONS
2 switching outputs PNP 2NO/NC
Analogue output 0-10 volts

2 switching outputs PNP 2NO/NC
Analogue output 4-20 mA

Voltage output, 0-10 V
2 switching outputs PNP

Beam angle:
Repeatability :
Supply voltage:
Sealing:

8°
0,4 % or ±2 mm
19 to 30 Vdc
Connector
IP65
Front face
IP67
Housing:
M30 x 1,5 mm plastic (PBTB)
Switching frequency:
5 to 30 Hz

Beam angle:
Repeatability :
Supply voltage:
Sealing:

Max. sensing distance:
1500 mm
Min. sensing distance:
150 mm
Beam angle:
10°
Repeatability:
0,4 % or ±2 mm
Switching frequency:
5 to 30 Hz
Response time:
100 ms
Supply voltage:
19 to 30 V
Sealing:
IP65
Housing:
M30 x 1,5 mm stainless steel

Max. sensing distance:
Min. sensing distance:

Max. sensing distance:
Min. sensing distance:

3500 mm
350 mm

2000 mm
250 mm

REFERENCE
942-T4N-2D-1C1-200E

Max. sensing distance:
Min. sensing distance:

2000 mm
250 mm

REFERENCE
942-T4N-2D-1D1-180E

REFERENCE
942-T4N-2D-1C1-180E

Max. sensing distance:
Min. sensing distance:

3500 mm
350 mm

REFERENCE
942-A4N-2D-1C1-220S

REFERENCE
942-T4N-2D-1D1-130E

REFERENCE
942-T4N-2D-1C1-130E

Max. sensing distance:
Min. sensing distance:

8°
0,4 % or ±2 mm
19 to 30 Vdc
Connector
IP65
Front face
IP67
Housing:
M30 x 1,5 mm plastic (PBTB)
Switching frequency:
5 to 30 Hz

1500 mm
150 mm

Max. sensing distance:
Min. sensing distance:

1500 mm
150 mm

REFERENCE
942-T4N-2D-1D1-200E

Max. sensing distance:
3000 mm
Min. sensing distance:
300 mm
Beam angle:
8°
Repeatability:
0,4 % or ±2 mm
Switching frequency:
5 to 30 Hz
Response time:
100 ms
Supply voltage:
19 to 30 V
Sealing:
IP65
Housing:
M30 x 1,5 mm stainless steel

REFERENCE
942-A4N-2D-1C1-130E

www.honeywell.com/sensing

121

ULTRASONIC DISTANCE SENSORS

942 Series
2 Piece
30 mm diameter sensor with
RS232 Interface

941 Series
Limit switch style

Voltage and current output
2 switching RS232 interface

Max. sensing distance:
1500 mm
Min. sensing distance (adjustable):
200 mm
Beam angle:
10°
Repeatability:
±1 mm
Supply voltage:
18 to 50 V
Sealing:
IP65
Housing:
Zinc die-cast, sea water resistant paint finish

Max. sensing distance:
Min. sensing distance:
Beam angle:
Repeatability:
Switching frequency:
Response time:
Supply voltage:
Sealing:
Housing:

1500 mm
150 mm
10°
0,2 % or ±1 mm
5 to 8 Hz
120 ms
19 to 30 V
IP65
M30 stainless steel

OPTIONS
Analogue voltage output, 0-10 V
REFERENCE
Complete sensor: 942-M3A-2D-1G1-220S

Response time:

150 ms

REFERENCE
941-C2V-2E-1C0

Switching
2 adjustable switching outputs PNP NO
Switching frequency:
REFERENCE
941-C2V-2E-001

122

www.honeywell.com/sensing

10 Hz

ULTRASONIC DISTANCE SENSORS

946 Series
Teach In
30 mm diameter
precision output

OPTIONS
Analogue voltage (0-10 V) and
current (4-20 mA) output

2 adjustable switching outputs
PNP NO

Beam angle:
Repeatability:
Supply voltage:
Sealing:
Housing:
Termination:

Beam angle:
Repeatability:
Supply voltage:
Sealing:
Housing:
Termination:

5°
< 0,1 %
10 to 30 V
IP65
M30 x 1,5 mm stainless steel
M12 connector

Max. sensing distance:
Min. sensing distance:
Response time:

500 mm
60 mm
35 ms

REFERENCE
946-A4V-2D-2C0-380E

Max. sensing distance:
Min. sensing distance:
Response time:

2000 mm
200 mm
100 ms

300 mm
60 mm
15 Hz

Max. sensing distance:
Min. sensing distance:
Switching frequency:

2000 mm
200 mm
5 Hz

REFERENCE
946-A4V-2D-001-175E

4000 mm
500 mm
300 ms

Max. sensing distance:
Min. sensing distance:
Switching frequency:

6000 mm
800 mm
1 Hz

REFERENCE
946-A4V-2D-001-65E

REFERENCE
946-A4V-2D-2C0-85E

Max. sensing distance:
Min. sensing distance:
Response time:

Max. sensing distance:
Min. sensing distance:
Switching frequency:
REFERENCE
946-A4V-2D-001-400E

REFERENCE
946-A4V-2D-2C0-175E

Max. sensing distance:
Min. sensing distance:
Response time:

5°
<1%
10 to 30 V
IP65
M30 x 1,5 mm stainless steel
M12 connector

6000 mm
800 mm
500 ms

REFERENCE
946-A4V-2D-2C0-65E

www.honeywell.com/sensing

123

ULTRASONIC DISTANCE SENSORS

Accessories

Due to regional agency approval requirements, some products may not be available in your area. Please
contact your regional Honeywell office regarding your choice of product.

Power supply

Beam Deflectors

24 Vdc regulated power supply
with output relay

Beam deflectors deflect the ultrasonic beam by 90° with virtually no
signal loss. They are extremely useful in applications where space is
limited; they allow the space required for the dead zone to be
accommodated when setting up the sensor. The focusing beam
deflector concentrates the ultrasonic beam, preventing unwanted
reflection. It reduces the beam angle by approximately half.
The 43192871 series is made of stainless steel and may be used
to fix the sensor. The 66195116-001, made of plastic, is available
for M30 sensors only and cannot be used to fix the sensor.

OPTIONS
M18

Compact - M30
The FF-MADB24RB is a small and versatile power
supply usually used with the ultrasonic distance
sensors, but may be used for any purpose. The
power supply accepts 115 or 230 Vac input, is
regulated to 24 Vdc. An internal SPDT relay may
be triggered by NPN or PNP sensor output.

Use with Series:
Housing:

942, 944, 946, 947
Plastic

Use with Series:
Housing:

Use with Series:
940, 941, 942, 944, 946, 947
Supply voltage:
110 Vac or 220 to 240 Vac
Circuit protection:
Short circuit
Load current:
150 mA max.
LED indication:
Output relay
Output type: Relay SPDT 4 A/250 Vac, 3 A/60 Vdc
Termination:
Screw
Housing:
Plastic
Housing type: DIN rail mount, 2 holes Ø4,5 mm
REFERENCE
66195116-001

37,5
1.48

50,0
1.97

35,0
1.38
4,8
0.19

M30
940, 942, 944, 946, 947
Stainless steel

60,0
2,36
62,5
2.46

75,0
2.95

6,0
0.24

110,0
4.33

REFERENCE
FF-MADB24RB
Focusing

124

Focusing

Use with Series:
Housing:

REFERENCE
43192871-001
43192871-002

www.honeywell.com/sensing

REFERENCE
43192871-003
43192871-004

940, 942, 944, 946, 947
Stainless steel

ULTRASONIC DISTANCE SENSORS

Mounting Clamps

M12 Connectors
OPTIONS
WITHOUT CABLES

WITH CABLES

M12 female, 5 pin, 5 screw terminals

M12 female, 5 pin, 2 metre cable
(supplied with 946 Series)

The 66195044-001 is used for the 940, 941, 944,
947 series but may be used for any industrial
sensor with standard M12 4 pin or 5 pin
connector. The 66195044-001 connector is
usually included with every sensor of the above
series for connectorised models.
Use with Series:
Housing:
Termination:
Number of pins:

940, 941, 944, 947
Plastic
Female M12
5

The 43178389 are plastic mounting clamps
usually used with the ultrasonic distance sensors,
but may be used with any M18 or M30 industrial
sensors. The 43178389 feature 2-part plastic
clamps with 2 M5x60 mm screws and nuts.
The 55002 is a 5 pin, M12 female, metal, cable
connector with 2 metres of cable attached. It is
used with the 946 series but may be used for any
industrial sensor with standard M12 4 pin or 5 pin
connector. The 55002 cable connector is included
with every sensor of the 946 series.
Use with Series:
Termination:
Number of pins:

REFERENCE
66195044-001

M12 female, 7 pin (942 Series)

OPTIONS
M18
Use with Series:
Housing:

940
Plastic

940, 941, 944, 946, 947
Female M12
5

REFERENCE
55002

Female, 8 pin, 2 metre cable (942
Series Compact)
The 66195074-001 is used for the ultrasonic
distance sensor heads 942-A4M. It needs to be
wired and soldered at the setup of the sensor. The
66195074-001 is included in every package of the
942 separate series (942 M3A...) but not in the
spare ultrasonic heads (942-A4M..).
Use with Series:
Housing:
Termination:
Number of pins:
REFERENCE
66195074-001

942
Stainless Steel
Female Binder
7

The 55195126-001 is an 8 pin, female, metal,
cable connector with 2 metres of cable attached.
It used with the 942-A4N compact series. This
device is useful but not necessary to setup the
sensor, as every ultrasonic distance sensor 942A4N is provided with a female connector without
cable, with pins to solder.
Use with Series:
Housing:
Termination:
Number of pins:

REFERENCE
43178389-018

M30
Use with Series:
Housing:

942, 944, 946, 947
Plastic

942
Stainless steel
Female Binder
8

REFERENCE
55195126-001

REFERENCE
43178389-030

www.honeywell.com/sensing

125

ULTRASONIC DISTANCE SENSORS

Accessories (continued)
Programming
OPTIONS
Software
The software package 55195101-101 contains
software for programming 942 series separate
and 55195101-102 for the 942 series compact .
The software runs under Microsoft Windows™
versions 95™ and later.
Both packages contain an RS-232 cable (crossed)
with 2 Sub-D 9 pin connectors, to connect to a PC.
For 55195101-101 (942 Series separate), the
other end of the cable connects to the control box
942-M0A.... by screw terminals. For 55195101102 (942 Series compact), the other end of the
cable connects to programming module
55000005-002.

Programming adaptor for 946
Series

Use with Series:
Sealing:
Number of pins:

942 Series Compact programming
module

946
IP65
4

REFERENCE
40779

For sensor series 942T... the programming cable
gives easy access to the RS232 interface. The
RS232 interface of the connector is directly
connected to the Sub-D 9 pin connector, which
allows easy connection to a PC. The Windows™
based software is easy to use and is supplied on a
floppy disc with the programming cable.
942-A Series Separate
942-N Series Compact
942-T Series
(includes programming cable)

The 55000005-002 is a programming module for
the 942-A4N series. Although this device is not
necessary to setup the sensor, it is very useful as
it provides quick connections for the RS-232 data
link and the ‘hold’ switch.
It features 1 connector din Sub-D 9 pin,
compatible with the cable included in the software
package 55195101-102, 1 microswitch to put the
sensor in ‘hold’ mode (necessary for the RS-232
link), 1 female and 1 male connector to be inserted
between the customer’s interface and the 942-A4N
sensor.

REFERENCE
55195101-101
55195101-102
55000018-001

The 55000005-002 may be used to programme
any number of sensors and is not necessary in the
usual run of the application. It is not compatible
with 942 separate series.
REFERENCE
55000005-002

126

www.honeywell.com/sensing

PRESSURE SENSORS

Pressure Sensors
Honeywell has over 40 years of experience in the pressure transducer
industry. We offer three pressure sensor measurement types - absolute,
differential and gage - including vacuum gage and bidirectional types. A wide
variety of pressure ranges, along with both amplified and unamplified
versions, are available. Silicon-based versions in stainless steel and brass
housings allow for use in harsh environmental conditions. A wide choice of
mounting, package, and port configurations allows customers to choose from
standard off-the-shelf designs.
Pressure sensors contain sensing elements that consist of four piezoresistors
buried in the face of a thin, chemically-etched silicon diaphragm. A pressure
change causes the diaphragm to flex, inducing a stress or strain in the
diaphragm and the buried resistors. The resistor values change in proportion
to the stress applied and produce an electrical output.
All Honeywell pressure sensors feature excellent repeatability, high accuracy
and reliability under varying environmental conditions. In addition, they
feature highly consistent operating characteristics from one sensor to the next
and interchangeability without recalibration.

Stainless Steel versions

High Purity versions

Honeywell also offers stainless steel pressure transducers that use bonded
strain gauge technology with stainless steel media isolation, which eliminates
the need for internal seals. Our stainless steel pressure transducers utilize
bonded semiconductor strain gauge technology and are designed for
demanding environments involving corrosive media. They are manufactured
in a variety of packages that are widely used in medical equipment,
compressors, hydraulic controls, transportation, agriculture, and refrigeration
applications. Laser trimmed and tested, they are fully calibrated and
temperature compensated to assure long-term reliability and performance.
Stainless steel pressure transducers are fully compensated to eliminate known
sources of errors.

High purity pressure sensors are focused on high-purity applications in the
wafer-processing segment of the semiconductor industry. With ISO 9001
certified facilities and Class 10 cleanroom capability, Honeywell manufactures
a full line of high purity pressure sensing and control products; each
individually tested, inspected and certified to be in full compliance with the
product specification.
The long life of the high-purity pressure sensors, coupled with long-term
stability, greatly reduces or eliminates the need for zero and span adjustments.

Most of our transducers utilize the ‘bonded strain gage’ technology and are
fully stainless steel media isolated, eliminating the need for internal elastomer
seals. Our strain gage design is very resistant to the effects of shock,
vibration and hostile environments. All of our transducers are fully
compensated and tested against the appropriate specifications before
shipment.

www.honeywell.com/sensing

127

PRESSURE SENSORS

AB/HP Series

BL Series

The AB-High Performance pressure transducer is extremely accurate down to
0.25% span over a wide compensated temperature range. Both zero and fullscale temperature compensation are held to extremely narrow limits.

The BL pressure transmitter has a conventional 4 mA to 20 mA output and is
available with accuracies to 0.25%. It has Factory Mutual approval as an
intrinsically safe device for use in hazardous areas. Class I, Division I, Groups
A through G (when used within approved barriers).

The transducer’s body is made in a configuration permitting its use as a ‘flushmounted’ device in situations where ease of cleaning or low-fluid volumes are
major requirements. It may also be mounted in an adaptor for more
conventional installations. Made from 316L or 15-5PH stainless steel, the AB/
HP offer premium performance and flexibility at OEM prices.
Approvals:
Supply voltage:
Signal conditioning:
Compensated temperature range:
Port style:
Output type:

CE
5.0 Vdc, 6.0 Vdc max.
Unamplified compensation
-1 °C to 71 °C (30 °F to 160 °F)
Flush Diaphragm
0 mV to 100 mV

Approvals:
Supply voltage:
Signal conditioning:
Operating temperature range:
Compensated temperature range:
Port style:
Output type:
Termination type:

CE, FM
12.0 Vdc to 30.0 Vdc
Amplified compensated
-40 °C to 82 °C (-40 °F to 180 °F)
-1 °C to 54 °C (-30 °F to 130 °F)
Flush Diaphragm
4 mA to 20 mA
Bendix Connector
79,0 max.
(3.125)

A
23,75 max.
(0.875)

4 conductor
color coded
shielded cable
0.91 m long
(3 ft. )

6,4
(0.25)

+ Excitation: Red
+ Signal: Grn
– Excitation: Blk
– Signal: Wht

B

23,8
max. dia.
(0.935)

29,2
max.
(1.15)

20,6
(0.75)

19,05 max.
(0.75)

PRESSURE
SENSITIVE
DIAPHRAGM

+ EXCITATION
RETURN
ZERO BALANCE
CASE GROUND

CONNECTOR
PTIH-10-6P

A
B
C&D
E

PRESSURE RANGE (PSI)
Pressure Range (PSI)

Dim. A MAX

Dim. B

0-5

.271

(6.9)

.25

(6.4)

1-15 to 0-50

.232

(5.9)

.25

(6.4)

0-100 to 0-200

.238

(6.1)

.25

(6.4)

OPTIONS

0-500 to 0-1000

.238

(6.1)

.19

(4.8)

0-2000 to 0-5000

.273

(6.9)

.19

(4.8)

0,91 m (3 ft) 4-Conductor Shielded Cable
-54 °C to 93 °C (-65 °F to 200 °F)

0-10000 to 0-15000

.287

(7.3)

.19

(4.8)

0-20000

.285

(7.5)

.19

(4.8)

PRESSURE RANGE
0 psia to 15 psia
0 psia to 50 psia
0 psig to 6 psig
0 psig to 25 psig
0 psig to 15 psig
0 psis to 100 psis
0 psis to 200 psis
0 psis to 500 psis
0 psis to 1,000 psis
0 psis to 2,000 psis
0 psis to 3,000 psis

REFERENCE
ABH015PAC1B
ABH050PAC1B
ABH006PGC1B
ABH025PGC1B
ABH015PGC1B
ABH100PSC1B
ABH200PSC1B
ABH500PSC1B
ABH01KPSC1B
ABH02KPSC1B
ABH03KPSC1B

OPTIONS
MEASUREMENT TYPE
Gauge
Gauge
Sealed Gauge
Sealed Gauge
Sealed Gauge
Sealed Gauge
Sealed Gauge
Sealed Gauge

Bendix High Temperature Connector
-54 °C to 149 °C (-65 °F to 300 °F)

128

C

19,0 max. dia.
(0.749)

Pressure sensitive surface
(diaphragm)

MEASUREMENT TYPE
Absolute
Sealed Gauge
Sealed Gauge

A
B

D

A

Shield
(drain)

MEASUREMENT TYPE
Absolute
Absolute
Gauge
Gauge
Gauge
Sealed Gauge
Sealed Gauge
Sealed Gauge
Sealed Gauge
Sealed Gauge
Sealed Gauge

F
E

PRESSURE RANGE
0 psia to 25 psia
0 psis to 3,000 psis
0 psis to 10,000 psis

REFERENCE
ABH025PABB
ABH03KPSBB
ABH10KPSBB

www.honeywell.com/sensing

PRESSURE RANGE
0 psig to 15 psig
0 psig to 15 psig
0 psis to 100 psis
0 psis to 100 psis
0 psis to 200 psis
0 psis to 500 psis
0 psis to 5,000 psis
0 psis to 10,000 psis

REFERENCE
BLH015PGBG
BL015PGBG
BL100PSBG
BLH100PSBG
BL200PSBG
BL500PSBG
BL05KPSBG
BLH10KPSBG

PRESSURE SENSORS

BX Series

Datamate Series

The BX pressure sensor is intended for OEMs who need a small, high
performance pressure sensor. The unique sensor module design eliminates
the need for oil-filled capsules and corrugated diaphragms providing a true,
robust sensing surface for long life and superior performance.

The DATAMATE is a two-wire pressure transmitter which is compatible with
data loggers and instrumentation used in processing environments. Its 4 mA
to 20 mA output is ideal for remote monitoring of both primary and secondary
process variables.

Supply voltage:
Signal conditioning:
Operating temperature range:
Compensated temperature range:
Port style:
Output type:
Termination type:

- SIGNAL d
- EXCITATION

c

5.0 Vdc
Unamplified compensated
-40 °C to 100 °C (-40 °F to 212 °F)
0 °C to 80 °C (32 °F to 130 °F)
Flush diaphragm
0 mV to 50 mV
4 - 22 AWG tinned Cu wires

22 AWG 0,6 (0.025) DIA.
TINNED Cu WIRES
APPROX. 9,6 (0.38) LONG
4 PLCS

8,6
(0.375)
5,8 max.
(0.23)

19,0
(0.75)
13,0
(0.5)

The DATAMATE is made of series 300 stainless steel. It is suitable for use with
a variety of media that would otherwise require insulators. It is also
intrinsically safe (when used within approved barriers) for use in Class I,
Division I, Groups A through G hazardous areas.
Approval:
FM
Supply voltage:
12.0 Vdc to 40.0 Vdc
Signal conditioning:
Amplified compensated
Operating temperature range:
-40 °C to 100 °C (-40 °F to 212 °F)
Compensated temperature range:
-1 °C to 54 °C (30 °F to 130 °F)
Port style:
1/8 - 27 NPT
Output type:
4 mA to 20 mA
Termination type:
3-wire, 24 AWG, 1/2 in. NPT internal conduit

+ SIGNAL b
+ EXCITATION a
PRESSURE
SENSITIVE
DIAPHRAGM

1/8-27 NPT, 12,7 (0.5) HEX
12,7 (0.5) NPT
INTERNAL

OPTIONS
MEASUREMENT TYPE
Gauge

+ EXCITATION
- EXCITATION
CASE GROUND

Ø 38,1
(Ø1.5)

PRESSURE RANGE
0 psig to 15 psig

REFERENCE
BX015PGTA

RED
BLK
GRN

19,0
(0.75)
71,4
(2.81 )

431,8
(17.0)

OPTIONS
MEASUREMENT TYPE
Gauge
Gauge
Sealed Gauge
Sealed Gauge
Sealed Gauge
Sealed Gauge

www.honeywell.com/sensing

PRESSURE RANGE
0 psig to 15 psig
0 psig to 50 psig
0 psis to 100 psis
0 psis to 200 psis
0 psis to 500 psis
0 psis to 5,000 psis

REFERENCE
DM015PG1WG
DM050PG1WG
DM100PS1WG
DM200PS1WG
DM500PS1WG
DM05KPS1WG

129

PRESSURE SENSORS

Eclipse Series

EA Series

The EA Series is designed for OEM users requiring high output and corrosionresistance. It has operated through millions of pressure cycles without
damage and is well suited for the cycling regimes found in automatic
equipment, robots, and hydraulic systems.
Approval:
Supply voltage:
Signal conditioning:
Compensated temperature range:
Port style:
Termination type:
Measurement type:

UL
85.0 Vdc
Amplified compensated
1 °C to 85 °C (30 °F to 185 °F)
1/8 in - 27 NPT
Quick disconnect
Gauge

41,91
(1.65)

The Eclipse (EC) Series pressure transducers are designed for OEMS who
require a reliable pressure transducer for industrial or heavy-duty applications.
The model EC features our proven all-wetted stainless steel design, rugged
packaging, internal signal amplification, and price which makes it an ideal
sensor for a variety of applications. The model EC offers a broad selection of
pressure ranges, output ranges, process connections, and electrical
termination to meet the demanding requirements of customers worldwide.
Approvals:
Supply voltage:
Signal conditioning:
Operating temperature range:
Compensated temperature range:

UL, CE
5.0 Vdc
Amplified compensated
-40 °C to 105 °C (-40 °F to 221 °F)
-40 °C to 105 °C (-40 °F to 221 °F)

20,83
(0.82)
5,11
(Ø.201)
2 PLCS

15,75
(0.625)
41,91
(1.65)

34,29
(1.375)

1/4 OD STRAIGHT SS PORT (0-6 to 0-50 PSI)
1/8-27 NPT, 13,0 (0.5) HEX (FOR EA/100 THROUGH 5000)
3/8-24 UNF, 14,0 (0.5625) HEX (OPTIONAL ON 5000)

54,61
(2.15)

76,0 (3.0) max.
38,0 (1.5) max.
2
Output

38,10
(1.50)
20,32
(0.75)

PINS
3,56 X 0,38
(.140 X .015)

d

2

3

4

1

4
Excitation

a
c

3
Ground

b

25,0 (1.0)
max.

25,0
(1.0)

PSI: 1/8-27 NPT, 15,9 (0.625) Hex
BAR: G 16,0 (0.25) Hex

OPTIONS

OPTIONS

Output 1 Vdc to 6 Vdc
-55 °C to 100 °C (-67 °F to 212 °F)

The Model Eclipse is available with a mini DIN style electrical connector. This
connection is a popular choice throughout the world and offers quick
disconnection, but can be rigidly attached with the center screw fastener. The
cable exit may be adjusted to any 90° direction.

MEASUREMENT TYPE
Gauge
Gauge
Gauge
Gauge
Gauge
Gauge
Gauge
Gauge
Gauge

PRESSURE RANGE
0 psig to 6 psig
0 psig to 15 psig
0 psig to 25 psig
0 psig to 100 psig
0 psig to 200 psig
0 psig to 300 psig
0 psig to 500 psig
0 psig to 1,000 psig
0 psig to 5,000 psig

REFERENCE
EA006PG1QD
EA015PG1QD
EA025PG1QD
EA100PG1QD
EA200PG1QD
EA300PG1QD
EA500PG1QD
EA01KPG1QD
EA05KPG1QD

Hirschmann - 0.5 Vdc to 4.5 Vdc Output
1/8 in - 27 NPT Connector
MEASUREMENT TYPE
Sealed Gauge
Sealed Gauge

Output 1 kHz to 6 kHz
-40 °C to 85 °C (-40 °F to 185 °F)
MEASUREMENT TYPE
Gauge
Gauge

130

PRESSURE RANGE
0 psig to 300 psig
0 psig to 500 psig

REFERENCE
EA300PG1QF
EA500PG1QF

www.honeywell.com/sensing

PRESSURE RANGE
0 psis to 200 psis
0 psis to 500 psis

REFERENCE
EC200PS1HC
EC500PS1HC

PRESSURE SENSORS

Eclipse Series (continued)

C
Ground

A
Excitation

23,0
(0.875)

38,0
(1.5)

48,0 max.
(1.875)

10,0 in. (0.375) max.

25,0 max
(1.0)

25,0
(1.0) max.

3 Conductor, 24 AWG,
Color Coded, Shielded
Cable, 0,91 m (3 ft.)

25,0
(1.0)
B
Output

25,0
(1.0) max
10,0 (0.375) max.

PSI: 1/8-27 NPT, 15,9 (0.625) Hex
BAR: G 16,0 (0.25) Hex

PSI: 1/8-27 NPT, 16,0 (0.625) Hex
7/16 UNF, 14,0 (05625) Hex
BAR: G1/4, 19,0 (0.75) Hex

OPTIONS

OPTIONS

To meet the requirements of automotive applications, the Model Eclipse is
offered with the Packard Metri-PackTM electrical connector. This connector
has been specified for the extreme environments found in engine and
hydraulic applications. The connector has a locking lug to maintain the
connection with the mating plug.

The Model Eclipse can be provided with an all stainless steel case and an
integral cable for electrical connection. The advantage of this arrangement is
that the environment rating is increased to IP66 and would be recommended
for extreme outdoor or industrial environments.

Packard - 0.5 Vdc to 4.5 Vdc Output
1/8 in - 27 NPT Connector
MEASUREMENT TYPE
Sealed Gauge
Sealed Gauge
Sealed Gauge
Sealed Gauge
Sealed Gauge

PRESSURE RANGE
0 psis to 200 psis
0 psis to 300 psis
0 psis to 500 psis
0 psis to 2,000 psis
0 psis to 3,000 psis

Model Cable
MEASUREMENT TYPE
Sealed Gauge
Sealed Gauge

PRESSURE RANGE
0 psis to 100 psis
0 psis to 5,000 psis

REFERENCE
EC100PS1CG
EC05KPS1CG

REFERENCE
EC200PS1PC
EC300PS1PC
EC500PS1PC
EC02KPS1PC
EC03KPS1PC

G1/4 in - 19 BSP Connector
MEASUREMENT TYPE
Sealed Gauge

PRESSURE RANGE
0 bar to 350 bar

REFERENCE
EC350BS6PC

4 mA to 20 mA Output
G1/4 in - 19 BSP Connector
MEASUREMENT TYPE
Gauge

PRESSURE RANGE
0 bar to 1 bar

REFERENCE
EC001BG6PG

www.honeywell.com/sensing

131

PRESSURE SENSORS

MediaMate Series

The MEDIAMATE pressure transducer provides the user with the corrosion
resistance of stainless steel at low OEM pricing. It is fully compensated and
completely interchangeable without further calibration. The MEDIAMATE’s
wetted parts and outer case are made from 300 series stainless steel. It is now
being used with a wide variety of corrosive medial such as Freon®, ammonia,
water, and hydraulic fluids.
Approvals:
Supply voltage:
Signal conditioning:
Operating temperature range:
Compensated temperature range:
Output type:
Measurement type:

CE
5.0 Vdc, 6.0 Vdc max.
Unamplified compensated
-40 °C to 100 °C (-40 °F to 212 °F)
-1 °C to 82 °C (30 °F to 180 °F)
0 mV to 50 mV
Gauge

MEDIAMATE WITH HIRSCHMANN
54,61
[(2.15)
40,64
(1.60)
19,14
(0.75)

16,0
SQUARE
(0.63)
2

3

4

1

MEDIAMATE WITH HOLLINGSWORTH

1/8-27 NPT

46,48
(1.83)
40,64
(1.60)
25,4
Ø (1.0)
4

PIN CODES ARE FOR OPTIONAL HIRSCHMANN
AND HOLLINGSWORTH CONNECTORS

19,14
(0.75)

Hollisworth
Pin Code

1

3

12,7 HEX
(0.5)

VENT HOLE

2

1/8-27 NPT

Hirshmann
Pin Code

Function

1

1

+ Signal

2

2

+ Excitation

3

3

- Signal

4

4

- Excitation

12,7 HEX
(0.5)

OPTIONS

OPTIONS

Hollingsworth - 1/8 in - 27 NPT Connector

Hirschmann - G-1/8 in BSP Connector

MEASUREMENT TYPE
Gauge
Gauge
Gauge
Gauge
Gauge
Gauge

PRESSURE RANGE
0 psig to 15 psig
0 psig to 100 psig
0 psig to 200 psig
0 psig to 500 psig
0 psig to 1,000 psig
0 psig to 5,000 psig

REFERENCE
MM015PG1QA
MM100PG1QA
MM200PG1QA
MM500PG1QA
MM01KPG1QA
MM05KPG1QA

MEASUREMENT TYPE
Gauge
Gauge
Gauge
Gauge

PRESSURE RANGE
0 psig to 25 psig
0 psig to 200 psig
0 psig to 5,000 psig
0 psig to 7,000 psig

REFERENCE
MM025PG10HA
MM200PG10HA
MM05KPG10HA
MM07KPG10HA

Hirschmann - 1/8 in - 27 NPT Connector
Hollingsworth - 3/8 in UNF Connector
MEASUREMENT TYPE
Gauge

PRESSURE RANGE
0 psig to 5,000 psig

REFERENCE
MM05KPG3QA

MEASUREMENT TYPE
Gauge
Gauge

PRESSURE RANGE
0 psig to 50 psig
0 psig to 100 psig

REFERENCE
MM050PG1HA
MM100PG1HA

Hirschmann - G-1/4 in BSP Connector
MEASUREMENT TYPE
Gauge

132

www.honeywell.com/sensing

PRESSURE RANGE
0 psig to 5,000 psig

REFERENCE
MM05KPG6HA

PRESSURE SENSORS

SA Series

SR Series

The harsh duty SA pressure transducer has a water resistant, stainless steel
case for complete protection from harsh environments. Internal hermetic
sealing is used to provide measurement from absolute pressures (psia) or
pressures referenced to a sealed chamber (psis). Underwriters Laboratories
has approved the SA as a component in float and pressure-operated motor
controllers (File #E93356).

The Model SR is intended for OEMs requiring a small pressure sensor with
high pressure capability and superior corrosion resistance. Constructed of
brazen assembly of 300 series stainless steels, the SR can tolerate a wide
variety of corrosive medial without risk of leaking. The SR’s design provide
high working pressures and high overload and burst pressures at no extra
cost.

Approvals:

Supply voltage:
Signal conditioning:
Operating temperature range:
Compensated temperature range:
Port style:
Output type:
Termination type:

Supply voltage:
Signal conditioning:
Operating temperature range:
Compensated temperature range:
Port style:
Output type:
Termination type:

UL (*C1D products)
CE (*C1DE products)
9.0 Vdc to 24.0 Vdc
Amplified compensated
-55 °C to 105 °C (-48 °F to 221 °F)
-1 °C to 85 °C (30 °F to 185 °F)
1/8-27 NPT
1 Vdc to 6 Vdc
0,91 m (3 ft) 3-conductor shielded cable

5.0 Vdc
Unamplified compensated
-40 °C to 100 °C (-40 °F to 212 °F)
0 °C to 75 °C (32 °F to 167 °F)
Capsule
0 mV to 100 mV
4 - 22 AWG tinned Cu wires

15,0 max.
(0.625)
7,6 max.
(0.30)

SA WITH CABLE
1/8-27 NPT
3/8-24 UNF (optional ≥100 PSI)

3 conductor
color coded
shielded cable
0,91 m long (3 ft)
Excitation: Red

4, 22 AWG
TINNED Cu SOLID WIRES
14,0 (0.55) LONG
a
+ Excitation
c
19,5 max. - Excitation
(0.766)

4,3 max.
(0.17)
19,0 / 18,95 18,5
(0.748 / 0.746) (0.75)

40,0
(1.56)

A

b
+ Signal

d
- Signal

O-RING GROOVE

Signal: Wht
Common: Blk
Bare
(case shield)

PRESSURE RANGE (PSI)

19,0
(0.75)

10,0
(0.38)

*A

Pressure
Range
(PSI)

48,0
(1.88)

Bore Dia.

1/2 Hex for 1/8-27 NPT port
9/16 Hex for 3/8-24 UNF port

O-Ring

Sealing
Depth**

Cavity
Depth

15-500

.500
(12.70)

2-012

.21 (5.33)

.22 (5.58)

1000-1500

.375 (9.52)

2-010

.21 (5.33)

.22 (5.58)

2000

.375 (9.52)

2-010

.21 (5.33)

.22 (5.58)

CAUTION: Contact with sensing surface at bottom of cavity will affect
accuracy and may cause damage. The O-ring groove on 2000 psi unit is
wider to accommodate a backup ring behind the O-ring.
All dimensions in inches (mm).

OPTIONS
UL Approval
MEASUREMENT TYPE
Absolute
Absolute
Absolute
Absolute
Gauge
Sealed Gauge
Sealed Gauge
Sealed Gauge
Sealed Gauge

PRESSURE RANGE
0 psia to 15 psia
0 psia to 25 psia
0 psia to 50 psia
0 psia to 100 psia
0 psig to 15 psig
0 psis to 100 psis
0 psis to 200 psis
0 psis to 500 psis
0 psis to 3,000 psis

REFERENCE
SA015PA1C1D
SA025PA1C1D
SA050PA1C1D
SA100PA1C1D
SA015PG1C1D
SA100PS1C1D
SA200PS1C1D
SA500PS1C1D
SA03KPS1C1D

PRESSURE RANGE
0 psia to 25 psia
0 psia to 50 psia

REFERENCE
SA025PA1C1DE
SA050PA1C1DE

CE Approval
MEASUREMENT TYPE
Absolute
Absolute

OPTIONS
MEASUREMENT TYPE
Gauge
Gauge
Gauge
Gauge
Gauge
Gauge
Gauge
Gauge
Gauge

www.honeywell.com/sensing

PRESSURE RANGE
0 psig to 15 psig
0 psig to 25 psig
0 psig to 50 psig
0 psig to 100 psig
0 psig to 200 psig
0 psig to 300 psig
0 psig to 500 psig
0 psig to 1,000 psig
0 psig to 2,000 psig

REFERENCE
SR015PGTB
SR025PGTB
SR050PGTB
SR100PGTB
SR200PGTB
SR300PGTB
SR500PGTB
SR01KPGTB
SR02KPGTB

133

PRESSURE SENSORS

ML Series

ST Series

The Model ML pressure transducers combines the latest in ASIC technology
with our proven stainless steel design. This digitally compensated transducer
offers an unparalleled value and performance combination making it the ideal
pressure sensing solution for demanding automotive and industrial
applications. Fully temperature compensated, calibrated, and amplified, the
ML is available in 100 to 5,000 psis pressure ranges.

The Model ST pressure transducer combines Honeywell’s proven silicon
pressure sensing with the latest in ASIC technology in a rugged, industrial
package. High value, coupled with outstanding performance, make this an
ideal transducer for industrial control applications such as air compressors
and pneumatic equipment.

Approval:
Supply voltage:
Signal conditioning:
Operating temperature range:
Compensated temperature range:
Termination type:
Measurement type:

UL
5.0 Vdc
Amplified compensated
-40 °C to 105 °C (-40 °F to 221 °F)
-40 °C to 105 °C ( -40 °F to 221 °F)
Packard Metri-Pack™ Connector
Sealed Gauge
40,0 *
(1.58)

19,0
(0.73)

Not Intended for
Customer use

Signal conditioning:
Operating temperature range:
Compensated temperature range:
Termination type:
Measurement type:

15,0 **
(0.60)

40,0 (1.58)

Not Intended for
Customer use

22,0
(0.85)

Amplified compensated
-40 °C to 100 °C (-40 °F to 212 °F)
-40 °C to 100 °C (-40 °F to 212 °F)
Packard Metri-Pack™ Connector
Gauge

19,0
(0.73)

15,0 (0.60)

22,0
(0.85)

c
27,0
(1.06)

c
27,0
(1.06)

b

b

a

27,0 (1.06) HEX

a

* 1/4-18 NPT and G1/4-18 BSP configurations are both optional.
Contact the factory to discuss other pressure port options.

27,0 (0.063) HEX

* Maximum
** 19,0 (0.75) for 1/4-18 NPT

1/8-27 NPT or 1/4-18 NPT

OPTIONS

OPTIONS

0.5 Vdc to 4.5 Vdc Output
1/8 in - 27 NPT Connector

4.0 mA to 20 mA Output
1/8 in - 27 NPT Connector

SUPPLY VOLTAGE
5.0 Vdc
5.0 Vdc

PRESSURE RANGE
0 psis to 1,000 psis
0 psis to 100 psis

REFERENCE
ML01KPS1PC
ML100PS1PC

1/4 in - 18 NPT Connector
SUPPLY VOLTAGE
5.0 Vdc

PRESSURE RANGE
0 bar to 10 bar

PRESSURE RANGE
0 psis to 100 psis

REFERENCE
ML100PS1PG

134

PRESSURE RANGE
0 psis to 100 psis
0 psis to 300 psis
0 bar to 60 bar

SUPPLY VOLTAGE
9.5 Vdc to 35 Vdc
9.5 Vdc to 35 Vdc
9.5 Vdc to 35 Vdc

PRESSURE RANGE
0 bar to 10 bar
0 psig to 200 psig

REFERENCE
ST010BG1SPGF
ST200PG1SPGF

PRESSURE RANGE
0 bar to 10 bar
0 bar to 2.5 bar
0 bar to 6.0 bar

REFERENCE
ST010BG2SPGF
ST2R5BG2SPGF
ST006BG2SPGF

0.5 Vdc to 4.5 Vdc Ratiometric Output
1/4 in - 18 NPT Connector
SUPPLY VOLTAGE
5.0 Vdc

1/4 in - 18 NPT Connector
SUPPLY VOLTAGE
9.5 Vdc to 35.0 Vdc
9.5 Vdc to 35.0 Vdc
9.5 Vdc to 35.0 Vdc

SUPPLY VOLTAGE
9.5 Vdc to 35 Vdc
9.5 Vdc to 35 Vdc

1/4 in - 18 NPT Connector
REFERENCE
ML010BS2PC

4 mA to 20 mA Output
1/8 in - 27 NPT Connector
SUPPLY VOLTAGE
9.5 Vdc to 35.0 Vdc

1/8-27 NPT*

REFERENCE
ML100PS2PG
ML300PS2PG
ML060BS2PG

www.honeywell.com/sensing

PRESSURE RANGE
0 psig to 50 psig

REFERENCE
ST050PG2SPCF

PRESSURE SENSORS

RIBBON CABLE

.000

50,0 (2.0) NOMEX INSULATED

VENT HOLE
(GAUGE UNITS ONLY)

14,61 (0.575)
10,67 (0.42)
8,26 (0.325)

Cell with Body Ring, 10 Vdc Excitation

19mm Series

Ø 15,09 (0.594)

W/ 2,54 (0.10) PIN SPACING

RING I.D.

(24 AWG EQUIV.)

-OUT
+OUT

Ø 18,69 (0.736)
Ø 16,51 (0.650)

Ø 18,95
(0.746)

A

-IN

O-RING GROOVE

1

+IN
4X 3,2 (0.125)
Ø 16,98 (0.668)
CKT CAVITY

CERAMIC SHOWN
(COMP. UNITS ONLY)

The ICT stainless steel 19C and 19 Vacuum Gauge Series devices are designed
for pressure applications that involve measurement of hostile media in harsh
environments compatible with 316 stainless steel. The special Vacuum Gauge
Series devices are specifically designed for applications that can be exposed
to a vacuum.

MEASUREMENT
Gauge
Gauge

TIG WELD
LOCATION
GROOVE FOR
AS568-016 O-RING

PRESSURE RANGE
0 psig to 15 psig
0 psig to 5.0 psig

REFERENCE
19C015PG1K
19C005PG1K

50,0 (2.0) NOMEX INSULATED

RIBBON CABLE

VENT HOLE
(GAUGE UNITS ONLY)

.000

1.5 mA or 10.0 Vdc
Unamplified compensated
-40 °C to 125 °C (-40 °F to 257 °F)
0 °C to 82 °C (32 °F to 179 °F)
98 mV to 102 mV
50,0 mm (2.0 in) Nomex ribbon cable

14,61 (0.575)
10,67 (0.42)
8,26 (0.325)

Cell with Body Ring, 1.5 mA Excitation
Supply voltage:
Signal conditioning:
Operating temperature range:
Compensated temperature range:
Output type:
Termination type:

Ø 15,09 (0.594)

W/ 2,54 (0.10) PIN SPACING

RING I.D.

(24 AWG EQUIV.)

-OUT
+OUT

Ø 18,69 (0.736)
Ø 16,51 (0.650)

Ø 18,95
(0.746)

A

-IN

O-RING GROOVE

1

+IN

OPTIONS

4X 3,2 (0.125)
Ø 16,98 (0.668)
CKT CAVITY

CERAMIC SHOWN
(COMP. UNITS ONLY)

TIG WELD
LOCATION
GROOVE FOR
AS568-016 O-RING

(0.870)

MEASUREMENT
Gauge
Gauge
Gauge
Gauge

.000

50,0 (2.0) NOMEX INSULATED
RIBBON CABLE
W/.2,54 (0.10) PIN SPACING
(24 AWG EQUIV.)

Ø.22,1

9,27 (0.365)

VENT HOLE
(GAUGE UNITS ONLY)

7,37 (0.290)
5,59 (0.220)
3,18 (0.125)

19 Vacuum Gauge Series - Flush Mount with Flange
PRESSURE RANGE
0 psig to 100 psig
0 psig to 300 psig
0 psig to 3.0 psig
0 psig to 5.0 psig

REFERENCE
19C100PG1L
19C300PG1L
19C003PG1L
19C005PG1L

-OUT

Ø.18,69(0.736)
WELD RELIEF
Ø.16,51 (0.650)
O-RING GROOVE

1

Flush Mount with Flange

4X 3,2 (0.125)

CERAMIC SHOWN
(COMP. UNITS ONLY)

EXPOSED
DIAPHRAGM

Ø.16,98 (0.668)
CKT CAVITY

GROOVE FOR
AS568-016 O-RING

VENT HOLE
(GAUGE UNITS ONLY)

9,27 (0.365)

+IN
50,0 (2.0) NOMEX INSULATED
RIBBON CABLE
W/.2,54 (0.10) PIN SPACING
(24 AWG EQUIV.)

Ø.22,1
(0.870)

.000

Ø.18,95
(0.746)

A

-IN

7,37 (0.290)
5,59 (0.220)
3,18 (0.125)

+OUT

-OUT
+OUT

1

+IN
4X 3,2 (0.125)

CERAMIC SHOWN
(COMP. UNITS ONLY)

CKT CAVITY

19,0 (0.75)

HEX

GROOVE FOR
AS568-016 O-RING

PRESSURE RANGE
0 psig to 5.0 psig

1/8 in - 27 NPT

-OUT
+OUT
-IN

Ø 18,95
(0.746)

A

50,0 (2.0) NOMEX INSULATED

Ø 13,72
(0.54)

1

+IN
CERAMIC SHOWN
(COMP. UNITS ONLY)

4X 3,2 (0.125)
Ø 16,98 (0.668)

1/4-18 NPT
TIG WELD
LOCATION

CKT CAVITY

STRIP CABLE
W/ 2,54 (0.10) PIN SPACING
(24 AWG EQUIV.)

VENT HOLE
(GAUGE UNITS ONLY)

REFERENCE
19C005PG3K

.000

.000

18,8 (0.74)

12,45 (0.49)
11,2 (0.44)

31,8 (1.23)

50,0 (2.0) NOMEX INSULATED
STRIP CABLE
W/ 2,54 (0.10) PIN SPACING
(24 AWG EQUIV.)

VENT HOLE
(GAUGE UNITS ONLY)

EXPOSED
DIAPHRAGM

Ø.16,98 (0.668)

MEASUREMENT
Gauge

1/4 in - 18 NPT

Ø.18,69(0.736)
WELD RELIEF
Ø.16,51 (0.650)
O-RING GROOVE

Ø.18,95
(0.746)

A

-IN

11,43 (0.45)
9,9 (0.39)

REFERENCE
19C015PV3K

17,78 (0.70)

PRESSURE RANGE
0 psig to 15 psig

30,0 (1.22)

MEASUREMENT
Vacuum Gauge

19,0 (0.75)

HEX

-OUT

Ø 4,34 (0.171)

+OUT
-IN

Ø 18,95
(0.746)

A

1

+IN

MEASUREMENT
Vacuum Gauge
Vacuum Gauge

PRESSURE RANGE
0 psig to 100 psig
0 psig to 15 psig

REFERENCE
19C100PV5L
19C015PV5L

CERAMIC SHOWN
(COMP. UNITS ONLY)

4X 3,2 (0.125)
Ø 16,98 (0.668)

MEASUREMENT
Gauge
Gauge

www.honeywell.com/sensing

1/8-27 NPT
TIG WELD
LOCATION

CKT CAVITY

PRESSURE RANGE
0 psig to 15 psig
0 psig to 300 psig

Ø 4,34 (0.17)

REFERENCE
19C015PG4K
19C300PG4K

135

PRESSURE SENSORS
These ICT 13 mm stainless steel devices are designed for high pressure
applications that involve measurement of hostile media in harsh
environments. This series uses ICT’s proven piezoresistive semiconductor
sensor chip in an oil-isolated housing with or without an integral ceramic for
temperature compensation and calibration. This design has proven to be
highly reliable, stable, and accurate.

13mm Series

Supply voltage:
Signal conditioning:
Operating temperature range:
Compensated temperature range:

1.5 mA or 10 Vdc
Unamplified
-40 °C to 125 °C (-40 °F to 257 °F)
0 °C to 82 °C (32 °F to 179 °F)

OPTIONS

-OUT (A)

RING I.D.
-OUT (A)

.000

10,16 (0.40)

26,9 (1.06)

50,0 (2.0) NOMEX INSULATED
STRIP CABLE
W/ 2,54 (0.10) PIN SPACING
(24 AWG EQUIV)
-OUT
IDENTIFIER

Ø 8,56 (Ø 0.337

.000

9,8 (0.39)

-OUT
IDENTIFIER

5,84 (0.23)

STRIP CABLE
W/ 2,54 (.010) PIN SPACING
(24 AWG EQUIV)

8,25 (0.325)

15,3 (0.60)

50,0 (2.0) NOMEX INSULATED

16,51 (0.65)

1/8 in - 27 NPT
50,0 mm (2.0 in) Nomex ribbon cable

Compensated Series - Ring with Back Support
50,0 mm (2.0 in) Nomex ribbon

19,1 (0.75) HEX

+OUT (B)

+OUT (B)

A

A

Ø 12,62 (0.497)
Ø 19,0 (0.748)

Ø 10,59 (0.417)

O-RING GROOVE
-IN (C)

-IN (C)

+IN (D)

TIG WELD
LOCATION

MEASUREMENT TYPE
Sealed Gauge
Sealed Gauge
Sealed Gauge

PRESSURE RANGE
0 psi to 5,000 psi
0 psi to 3,000 psi
0 psi to 1,000 psi

CKT CAVITY

OUTPUT TYPE
148 mV to 152 mV
98 mV to 102 mV
98 mV to 102 mV

REFERENCE
13C5000PS1L
13C3000PS1L
13C1000PS1L

-OUT (A)

MEASUREMENT TYPE
Absolute

PRESSURE RANGE
0 psi to 5,000 psi

PIN NUMBERS
REF. ONLY

.000

11,94 (0.47)

18,29 (0.72)

29,2 (1.15)

STRIP CABLE
W/ 2,54 (0.10) PIN SPACING
(24 AWG EQUIV)
-OUT
IDENTIFIER

1/8-27 NPT

Ø 4,34 (Ø0.171)

TIG WELD
LOCATION

OUTPUT TYPE
148 mV to 152 mV

REFERENCE
13C5000PA4K

Uncompensated Series
Pin Connector

1/4 in - 18 NPT
50,0 mm (2.0 in) Nomex ribbon cable
50.0 (2.0) NOMEX INSULATED

4X 3,2 (0.13)

Ø 11,91 (Ø0.469)

Ø 15,67 (Ø0.617)

O-RING GROOVE
(10mm X 1.5mm O-RING
NOT PROVIDED)

19,1 (0.75) HEX

6
5
4

+OUT (B)
A

6X Ø0,51 (0.63) ON
Ø 7,62 (0.30) PIN CIRCLE

Ø19,0 (0.748)

BALL WELD AREA
-IN (C)

.000

BACK SUPPORT

8,25 (0.325)
5,84 (0.23)

4X 3,2 (0.375)

10,16 (0.40)

+IN (D)

20,3 (0.80)

ecabl

Ø 8,56 (Ø0.337)

RING I.D.

1
2

Ø 10,59 (0.417)

Ø 12,62 (0.497)

3

O-RING GROOVE
(10mm X 1.5mm O-RING
NOT PROVIDED)

TIG WELD
LOCATION

+IN (D)
Ø 11,91 (Ø0.469)

CKT CAVITY

MEASUREMENT TYPE
Sealed Gauge
Sealed Gauge
Sealed Gauge

136

4X 3,2 (0.13)

1/4-18 NPT

Ø 4,34 (Ø0.171)

TIG WELD
LOCATION

PRESSURE RANGE
0 psi to 1,000 psi
0 psi to 5,000 psi
0 psi to 3,000 psi

OUTPUT TYPE
98 mV to 102 mV
148 mV to 152 mV
98 mV to 102 mV

MEASUREMENT TYPE
Absolute
Absolute

REFERENCE
13C1000PS5L
13C5000PS5L
13C3000PS5L

www.honeywell.com/sensing

PRESSURE RANGE
0 psi to 1,000 psi
0 psi to 5,000 psi

OUTPUT TYPE
175 mV to 300 mV
290 mV to 500 mV

REFERENCE
13U1000PA0K
13U5000PA0K

PRESSURE SENSORS

SPT Series

Signal conditioning:
Compensated temperature range:
Operating temperature range:
Measurement type:

Amplified and unamplified compensated
-10 °C to 85 °C (14 °F to 185 °F)
-40 °C to 125 °C (-40 °F to 257 °F)
Absolute, Sealed, and Gauge

22,2 (0.875)

HEX

Ø20,7 (0.815)

Ø13,72

.000

HEX

Ø 10,29
(0.405)

VENT TUBE
(GAUGE UNITS ONLY)

SUPPLY VOLTAGE
12.0 Vdc to 30.0 Vdc

.000

11,0 (0.44)

12,45 (0.49)

18,8 (0.74)

72,8 (2.87)

4-CONDUCTOR CABLE
24 AWG CONDUCTORS
SHIELDED, IN PAIRS,
WITH DRAIN WIRE
CUSTOMER SPECIFIED
LENGTH (IN FEET)

22,2 (0.875)

Ø 20,7 (0.815)

1/8-27 NPT

TIG WELD
LOCATION

19,0 (0.70)

TIG WELD
LOCATION

OPTIONS
4mA to 20 mA Output
0,609 m (2 ft) 4-Conductor shielded pairs

10,0 (0.39)

4-CONDUCTOR CABLE
24 AWG CONDUCTORS
SHIELDED, IN PAIRS,
WITH DRAIN WIRE
CUSTOMER SPECIFIED
LENGTH (IN FEET)

11,42 (0.45)

17,77 (0.70)

1/8 in - 27 NPT
0,609 m (2 ft) 4-Conductor shielded pairs
1.0 Vdc to 5.0 Vdc Output
71,7 (2.82)

The SPT stainless steel devices are designed for pressure applications that
involve measurement of hostile media in harsh environments and will
accommodate any media that will not adversely attack 304 or 316 stainless
steel wetted parts. The SPT stainless steel devices are rugged and reliable
transducers for use in a wide variety of pressure sensing applications where
corrosive liquids or gases are monitored.

PRESSURE RANGE
0 psi to 15 psi

Ø 4,34 (Ø0.171)

REFERENCE
SPT4V0015PG4W02

1/4 in - 18 NPT
0,304 m (1 ft) 4-Conductor shielded pairs
1.0 Vdc to 5.0 Vdc Output

PRESSURE RANGE
0 psi to 100 psi
0 psig to 5.0 psig

REFERENCE
STPMA0100PG5W02
SPTMA0005PG5W02

22,2 (0.875)

HEX

PIN D

PIN B

Ø 20,7 (0.815)

Ø 13,72
(0.54)

C

PIN C
4 -PIN SHELL SIZE
8 BAYONET
LOCK CONNECTOR
RECEPTACLE

SUPPLY VOLTAGE
10.0 Vdc

TIG WELD
LOCATION

13,2
(0.52)

Ø 4,34 (Ø0.171)

.000

PRESSURE RANGE
0 psig to 10 psig

Ø 4,34 (Ø0.171)

REFERENCE
SPT4V0010PG5W01

1/4 in - 18 NPT
0,609 m (2 ft) 4-Conductor shielded pairs
1.0 Vdc to 5.0 Vdc Output
SUPPLY VOLTAGE
12.0 Vdc to 30.0 Vdc

PRESSURE RANGE
0 psi to 100 psi

REFERENCE
STP4V0100PG5W02

REFERENCE
STPMA0100PG5B

7/16 in UNF
1.0 Vdc to 5.0 Vdc Output
.000

10,0 (0.39)

11,42 (0.45)

17,77 (0.70)

1/8 in - 27 NPT - 0 mV to 100 mV Output
0,609 m (2 ft) 4-Conductor shielded pairs
71,7 (2.82)

TIG WELD
LOCATION

1/4-18 NPT
TIG WELD
LOCATION

PRESSURE RANGE
0 psig to 100 psig

4-CONDUCTOR CABLE
24 AWG CONDUCTORS
SHIELDED, IN PAIRS,
WITH DRAIN WIRE
CUSTOMER SPECIFIED
LENGTH (IN FEET)

1/4-18 NPT

TIG WELD
LOCATION

4-CONDUCTOR CABLE
24 AWG CONDUCTORS
SHIELDED, IN PAIRS,
WITH DRAIN WIRE
CUSTOMER SPECIFIED
LENGTH (IN FEET)

22,2 (0.875)

HEX

7,0 (0.28)
.000

B

19,0 (0.70)

8,89 (0.35)

A D

11,0 (0.44)

(0.54)

15,24 (0.60)

PIN A

HEX

Ø13,72

SUPPLY VOLTAGE
12.0 Vdc to 30.0 Vdc
.000

11,0 (0.44)

12,45 (0.49)

18,8 (0.74)

72,8 (2.87)

VENT HOLE
(GAUGE UNITS ONLY)

22,2 (0.875)

Ø20,7 (0.815)

VENT TUBE
(GAUGE UNITS ONLY)

1/4 in - 18 NPT - 0 mV to 100 mV Output
Bayonet Connector

18,8 (0.74)

Ø 4,34 (Ø0.171)

72,8 (2.87)

TIG WELD
LOCATION

69,2 (2.73)

SUPPLY VOLTAGE
12.5 Vdc to 30.0 Vdc
12.5 Vdc to 30.0 Vdc

4-CONDUCTOR CABLE
24 AWG CONDUCTORS
SHIELDED, IN PAIRS,
WITH DRAIN WIRE
CUSTOMER SPECIFIED
LENGTH (IN FEET)

1/4-18 NPT

TIG WELD
LOCATION

19,0 (0.70)

12,45 (0.49)

(0.54)

VENT TUBE
(GAUGE UNITS ONLY)

22,2 (0.875)

HEX

Ø20,7 (0.815)
Ø 20,7 (0.815)
Ø 10,29

(0.405)

VENT TUBE
(GAUGE UNITS ONLY)

SUPPLY VOLTAGE
10.0 Vdc

19,0 (0.70)

TIG WELD
LOCATION

PRESSURE RANGE
0 psi to 100 psi

1/8-27 NPT
TIG WELD
LOCATION

VENT TUBE
(GAUGE UNITS ONLY)

19,0 (0.70)

TIG WELD
LOCATION

Ø 4,34 (Ø0.171)

REFERENCE
SPTMV0100PG4W02

7/16-20 UNF-2A
GLAND PER
MS33656 Ø4,34 (Ø0.171)
TIG WELD
LOCATION

SUPPLY VOLTAGE
12.0 Vdc to 30.0 Vdc

www.honeywell.com/sensing

PRESSURE RANGE
0 psi to 200 psi

REFERENCE
SPT4V0200PG6W02

137

PRESSURE SENSORS
4.0 mA to 20.0 mA Output
1/2 in Male Face Seal Connector
1,83 m (6 ft) 2-Conductor Cable

F1 Series

MEASUREMENT TYPE
Compound

PRESSURE RANGE
-14.7 psig to 250 psig

REFERENCE
F14WMV250CP

1/4 in Male Face Seal
Bendix Male Connector
All F1 pressure transducers are manufactured in our Class 10 clean room
environment. Our flow-through pressure transducers are specifically
designed for the semiconductor industry. Their long life, coupled with longterm stability, can greatly reduce or eliminate the need for zero and span
adjustments. All Honeywell transducers are CE certified with EMI/RFI
protection and are manufactured to an electropolished wetted surface finish of
5 micro inch Ra maximum.
Approvals:
Supply voltage:
Signal conditioning:
Operating temperature range:
Compensated temperature range:

CE, FM
12 Vdc to 36.0 Vdc
Amplified compensated
-40 °C to 85 °C (-40 °F to 185 °F)
0 °C to 70 °F (32 °F to 158 °F)

OPTIONS

PRESSURE RANGE
0 psi to 1,000 psi
-14.7 psig to 100 psig

PRESSURE RANGE
-14.7 psig to 100 psig
-14.7 psig to 250 psig

REFERENCE
F14VMV100CB
F14VMV250CB

1/4 in Male Face Seal
1,83 m (6 ft) 2-Conductor Cable
MEASUREMENT TYPE
Gauge
Compound
Compound

PRESSURE RANGE
-14.7 psig to 250 psig
-14.7 psig to 250 psig
0 psi to 3,000 psi

REFERENCE
F14VM0250GP
F14VMV250CP
F14VMV3000CP

1/4 in Male Fixed by Female Face Seal
Bendix Male Connector
MEASUREMENT TYPE
Compound

0 Vdc to 5.0 Vdc Output
1/4 in Male Face Seal Connector
Bendix Male Connector
MEASUREMENT TYPE
Absolute
Compound

MEASUREMENT TYPE
Compound
Compound

PRESSURE RANGE
-14.7 psig to 7.0 psig

REFERENCE
F14VPV7BCB

1/4 in Male Fixed by Female Face Seal
1,83 m (6 ft) 2-Conductor Cable
REFERENCE
F15VM0100AB
F15VMV100CB

MEASUREMENT TYPE
Compound

PRESSURE RANGE
-14.7 psig to 100 psig

REFERENCE
F14VPV100CP

1/4 in OD 0.035 wall, 1/4 in long tube stub
Bendix Male Connector
MEASUREMENT TYPE
Compound

PRESSURE RANGE
-14.7 psig to 100 psig

REFERENCE
F14TV4V100CB

OPTIONAL

1/4" fittings
23,5
(0.93)

Tube stub ends
21,5
(0.74) typ.

24,1

24,1
(0.96)
82,0
(3.23)

(0.96) typ.
56,0
(2.24)

77,0 max.
(3.20)

77,0 max.
(3.20)

52,0
(2.43)

1/4 female face seal

1/4 male face seal

6,3
(0.25)

11,0
(0.44)

0.035 typ.
24,1
(0.96)
typ.
47,0
(1.86)

1/4 tube stub

24,1
(0.96)
82,0
(3.23)

1/4 male face seal swivel

138

21,0
(0.83)

11,0
(0.43) typ.

www.honeywell.com/sensing

12,0
(0.50)

11,0
(0.44)
24,1
(0.96)
typ.
47,0
(1.86)

1/2 tube stub

.05 typ.

9,3
(0.37)

11,0
(0.44)
24,1
(0.96)
typ.
47,0
(1.86)

3/8 tube stub

0.035 typ.

PRESSURE SENSORS
OPTIONS

S1 Series

VF 1/4 in Female Face Seal
Bendix Male Connector
MEASUREMENT TYPE
Compound

PRESSURE RANGE
-14.7 psig to 100 psig

REFERENCE
S14VFV100CB

VM 1/4 in Male Face Seal
Bendix Male Connector
All S1 pressure transducers are manufactured in our Class 10
clean room environment. Our single port pressure
transducers are specifically designed for the semiconductor industry. Their
long life, coupled with long-term stability, can greatly reduce or eliminate the
need for zero and span adjustments. All Honeywell transducers are CE
certified with EMI/RFI protection and are manufactured to an electropolished
wetted surface finish of 5 micro in Ra maximum.
Approvals:
Supply voltage:
Signal conditioning:
Operating temperature range:
Compensated temperature range:
Output type:

CE, FM
12.0 Vdc to 36.0 Vdc
Amplified compensated
-40 °C to 85 °C (-40 °F to 185 °F)
0 °C to 70 °C (32 °F to 158 °F)
4 mA to 20 mA

MEASUREMENT TYPE
Compound
Compound

PRESSURE RANGE
-14.7 psig to 100 psig
-14.7 psig to 250 psig

REFERENCE
S14VMV100CB
S14VMV250CB

VM 1/4 in Male Face Seal
1,83 m (6 ft) 2-Conductor Cable
MEASUREMENT TYPE
Gauge
Compound

PRESSURE RANGE
0 psi to 3,000 psi
0 psi to 3,000 psi

REFERENCE
S14VM3000GP
S14VMV3000CP

VS 1/4 in Male Face Seal, Swivel
Bendix Male Connector
20,3
(0.80)

20,3
(0.80)

MEASUREMENT TYPE
Compound
Compound
Compound
Compound
Compound
Compound

PRESSURE RANGE
-14.7 psig to 100 psig
-14.7 psig to 250 psig
-14.7 psig to 100 psig
-14.7 psig to 100 psig
-14.7 psig to 100 psig
-14.7 psig to 100 psig

REFERENCE
S14VSV100CB
S14VSV250CB
S14VSV1755BCB
S14VSV210BCB
S14VSV70BCB
S14VSV7BCB

67,5 typ.
(2.74)
116,9 max.
(4.60)

VS 1/4 in Male Face Seal, Swivel
1,83 m (6 ft) 2-Conductor Cable

106,7 max.
(4.20)

MEASUREMENT TYPE
Compound
Compound

.30 typ
30,4
(1.20)

.80 across flats typ.

PRESSURE RANGE
-14.7 psig to 100 psig
-14.7 psig to 100 psig

REFERENCE
S14VSV210BCP
S14VSV70BCP

30,4
(1.20)
23,6
(0.93)

23,6
(0.93)

1/4" male swivel
with pigtail

1/4" male swivel
with Bendix

Fitting Options

10,9
(0.43)

30,4
(1.20)

15,4
(0.61)

0.035 typ.

23,6
(0.93)
1/4" female face seal

23,6
(0.93)
1/4" tube stub

23,6

(0.93)
1/4" male face seal

www.honeywell.com/sensing

139

PRESSURE SENSORS

TLD Series

With space at a premium in semiconductor gas distribution systems, the Series TLD pressure transducer with local
display offers an integrated solution that reduces the overall height of the transducer/display assembly to as little as 3.5
in [88,9 mm]. To accomplish this, the transducer’s signal amplifier is mounted within the display, with the added benefit
of zero and span adjustments conveniently located on the LED display face.
Supply voltage:
Signal conditioning:
Operating temperature range:
Compensated temperature range:
Termination type:

12.0 Vdc to 30.0 Vdc
Amplified compensated
-40 °C to 85 °C (-40 °F to 185 °F)
0 °C to 70 °C (32 °F to 158 °F)
1,83 m (6 ft) 2-conductor cable

OPTIONS
Flow-through/Output Signal 4 mA to 20 mA
MEASUREMENT TYPE
Compound
Compound
Compound

PRESSURE RANGE
-14.7 psig to 100 psig
-14.7 psig to 100 psig
-14.7 psig to 100 psig

CONNECTIONS
1/4 in. OD 0.035 in. wall, 1/4 in long tube stub
1/4 in. female face seal, swivel
1/4 in. female face seal, swivel

REFERENCE
TLDF4CVT4V100CP
TLDF4CVVFV100CP
TLDF4BSVFV100CP

Flow-through/Output Signal 0 Vdc to 5.0 Vdc
MEASUREMENT TYPE
Compound

PRESSURE RANGE
-14.7 psig to 100 psig

CONNECTIONS
1/4 in. OD 0.035 in. wall, 1/4 in long tube stub

REFERENCE
TLDF5CVT4V100CP

Single Port/Output Signal 4 mA to 20 mA
MEASUREMENT TYPE
Compound

PRESSURE RANGE
-14.7 psig to 100 psig

REFERENCE
TLDS4BNVFV100CP

1/4 in. female face seal, swivel

Flow-through display orientation and transducer location
35,9
1.42

38,1
1.50

26,1
1.03

38,1
1.50

z

38,1
1.50

z

s
82,5
3.25

s

38,1
1.50

CABLE
2 COND
1,8 m (6
CVft)-

72,4
2.85

Transducer at center back,
vertical display orientation
38,1
1.50

BS - Transducer at bottom, side display orientation
38,1
1.50
z

CH - Transducer at center back,
horizontal display orientation

35,9
1.42
38,1
1.50

26,1
1.03

38,1
1.50
82,5
3.25

72,4
2.85

z

s

CABLE
2 COND
1,8 m (6 ft)

BF - Transducer at bottom, front display orientation

140

s

www.honeywell.com/sensing

42,7
1.68
77,0
3.03

CABLE
2 COND
1,8 m (6 ft)

PRESSURE SENSORS

TLD Series (continued)
Single port display orientation and transducer location

38,1
1.50
z

35,9
1.42

s
38,1
1.50

42,7
1.68

47,0
1.85

38,1
1.50

26,1
1.03

z

4,57
0.18

11,2
0.44

38,1
1.50

CABLE
2 COND
1,8 m (6 ft)

100,9
3.97

Flow-through connection options

s

CABLE
2 COND
1,8 m (6 ft)

6,4
0.25

24,1
0.95

T4 - 1/4 in tube stub

BN - Transducer at bottom

CN - Transducer at center back

75,2
2.96

VF - 1/4 in female face seal

Single port connection options

56,9
2.24
11,2
0.44

32,9
1.29

VM - 1/4 in
male face seal

24,1
0.95

32,3
1.27

VM - 1/4 in male face seal

VF - 1/4 in
female face seal
81,5
3.21

10,9
0.43

32,3
1.27

VS - 1/4 in
male face seal,
swivel

VS - 1/4 in male face seal, swivel

6,4
0.25

T4 - 1/4 in
tube seal

4,57
0.18

www.honeywell.com/sensing

141

PRESSURE SENSORS
The Bonded Element general-purpose industrial pressure transducers were
developed for a variety of pressure applications and industries, providing
excellent media compatibility with all stainless steel wetted parts. It is the ideal
choice for applications where both media compatibility and high cycle life are
essential

Bonded Element Series

Supply voltage:
Signal conditioning:
Operating temperature range:
Compensated temperature range:
Output type:
Termination type:

4.75 Vdc to 5.25 Vdc
Amplified
-40 °C to 125 °C (-40 °F to 257 °F)
-20 °C to 85 °C (-4 °F to 185 °F)
0.5 V to 4.5 V Ratio-metric
GT 150 Series - 3 pin

OPTIONS
SS Housing - 1/4 in NPT

SS Housing - 1/8 in NPT

V out
COMMON

GT 150
SERIES - 3 PIN

MEASUREMENT TYPE
Gauge

STAINLESS STEEL
HOUSING

1,37 [0.05]

0,60 [0.02]

PRESSURE RANGE
0 psig to 125 psig

+V

0,95 [0.04]

0,95 [0.04]
GT 150
SERIES - 3 PIN

PLATED CRS
HOUSING

V out
COMMON

+V

1,37 [0.05]

0,42 [0.016]

1/4-18NPT

REFERENCE
BE-4R125PG5DS

1/8-27 NPT

MEASUREMENT TYPE
Gauge

PRESSURE RANGE
0 psig to 500 psig

REFERENCE
BE-4R500PG4DS

SS Housing - 7/16 in - 20 UNF

CRS Housing - 1/4 in NPT

V out

V out
COMMON

COMMON

+V

+V

0,95 [0.04]

0,95 [0.04]

GT 150
SERIES - 3 PIN

GT 150
SERIES - 3 PIN

PLATED CRS
HOUSING

STAINLESS STEEL OR
PLATED CRS HOUSING

0.43 [0.015]

0,60 [0.02]

MEASUREMENT TYPE
Gauge

PRESSURE RANGE
0 psig to 125 psig

1,37 [0.05]

1,37 [0.05]

1/4-18NPT

REFERENCE
BE-4R125PG5DC

GLAND PER MS33656
(3-904 O-RING SEAL
NOT PROVIDED)
7/16-20UNF

MEASUREMENT TYPE
Gauge

PRESSURE RANGE
0 psig to 5,000 psig

CRS Housing - 7/16 in - 20 UNF
COMMON

REFERENCE
BE-4R5000PG6DS

V out
+V

0,95 [0.04]
GT 150
SERIES - 3 PIN
STAINLESS STEEL OR
PLATED CRS HOUSING

0.43 [0.015]

1,37 [0.05]

GLAND PER MS33656
(3-904 O-RING SEAL
NOT PROVIDED)
7/16-20UNF

MEASUREMENT TYPE
Gauge

142

www.honeywell.com/sensing

PRESSURE RANGE
0 psig to 5,000 psig

REFERENCE
BE-4R5000PG6DC

SENSING AND CONTROL PRODUCTS
HONEYWELL SENSING AND CONTROL PRODUCTS
Selecting the right sensor or switch for your application has never been easier. Honeywell Sensing and Control has one of the broadest product ranges of any
supplier in the world, and the depth of our technology and product lines ensure that we are able to supply you with the right product for most applications.
We also have the outstanding technical support staff and responsive service to back this up, so you can always find what you need, when you need it. We aim to
supply on time, every time, anywhere in the world.

Honeywell - Taking the risk and high costs out of system critical sensing and control.
You can find out more about Honeywell’s extensive product range by visiting our website at

www.honeywell.com/sensing
There you can browse our interactive catalogue and discover our full range of products for use in Industrial, Automotive, Aviation, Transportation, Motion Control,
Medical applications and more. Some of our more popular product families include:

Accelerometers

Infrared Sensors

Utilizing Quartz Flexure and Resonating Beam technologies for inertial, control,
and industrial applications.

Optoelectronic standard infrared emitting diodes (IREDs), sensors and
assemblies for object presence, limit, and motion sensing, position encoding,
and movement counting.

Automotive Sensors
Speed and position sensors for engine management, wheel speed sensors,
and position sensors for comfort, convenience, and motor control
applications.

Limit and Enclosed Switches

Basic Switches

Liquid Level Sensors

Standard size, miniature, subminiature, hermetically sealed, and high
temperature snap-action switches for applications requiring compactness,
light weight, accurate repeatability and long life.

Basic and industrial (designed for harsh industrial environments) liquid level
sensors used to indicate the presence or absence of liquid.

Heavy duty limit switches, enclosed switches (precision snap-acting switches
sealed in rugged metal housing) and sealed and explosion-proof switches.

Mass Airflow Sensors
Current Sensors
Adjustable linear, null balance, digital, and linear output current sensors for
monitoring ac or dc current.

Amplified and unamplified microbridge mass airflow sensors provide a
sensitive and fast response to the flow of air or other gas over the chip.

Off-Highway Vehicular Lighting
Electronic and Electromechanical Safety products for
Machine Safeguarding
Safety light curtains, laser scanners, mats, door interrupt devices and single
and multi-beam optoelectronic devices for industrial machine safety. Safety
interlock switches, limit switches and cable-pull limit switches for industrial
machine safety. Safety control modules for industrial machine safety.

Environment Sealed Switches and Sensors
Designed for use in the harsh environments encountered in aerospace,
transportation, ordnance and marine applications.

Fibre Optic Sensors
Active optoelectronic components and sub-assemblies (LEDs/transmitters,
fiber-DIPs, receivers and modules) for the datacom market.

Force Sensors
Precise reliable performance in compact commercial grade packaging.

Hour Meters
Honeywell’s Hobbs brand products are designed for elapsed time
measurement for testing, leasing, maintenance and warranty programs. The
meter family includes LCD, Counter, Battery Controller, AC Electro-Mechanical
and DC Electro-Mechanical.

Humidity Sensors

Honeywell’s Hobbs brand halogen sealed beams, composites, custom
designer lights, specialty lighting and indicator modules for vehicular and
non-vehicular applications.

Position Sensors
Hall-effect, magnetoresistive, and potentiometric devices for detecting the
presence of a magnetic field or linear and rotary position.

Pressure Sensors
Stainless steel and silicon pressure sensors depending on the application, as
well as a variety of high purity pressure sensors.

Proximity Sensors
Severe environment proximity sensors designed for use in applications with
particularly demanding requirements on temperature, vibration, shock, and
EMI/lightning resistance.

Pushbuttons, Keyswitches and Indicators
MICRO SWITCH brand pushbuttons, keyswitches, and indicators for use
anywhere manual operation is desired.

Railway Sensors and Control Systems
Railwheel proximity sensors, interface modules, train departure control
systems, solid state sensors, pressure sensors and electromechanical
switches for on-board and off-board rail industry applications.

Relative humidity/temperature and relative humidity sensors in chemically
resistant packages to accommodate harsh environments.

www.honeywell.com/sensing

1

INTRODUCTION

SENSING AND CONTROL PRODUCTS
Relays

Turbidity Sensors

General-purpose power relays and relay sockets designed for a wide range of
applications that require stability and reliability.

Wash process turbidity sensors to improve product quality, minimize
ingredient consumption, and reduce wastewater discharge in commercial and
industrial bath applications.

Resolvers
Absolute position sensors which provides high angular accuracy, high
resolution and repeatability under severe environmental conditions.

Ultrasonic Sensors

Temperature Sensors

Ultrasonic position sensors for presence/absence sensing, precision distance
sensing or tracking for areas where other sensing technologies have difficulty,
such as clear or shiny objects, foggy or particle laden air, or splashing liquids.

Platinum- and silicon-based thin film resistance temperature devices (RTDs)
for applications that require small package size, accuracy, and linear outputs.

VCSEL Products

Thermal Products

Vertical Cavity Surface Emitting Laser sensors for high speed data
communication applications and a wide variety of sensor applications.

Bimetal thermostats, Discrete and Packaged Thermistors, Precision Hi-Rel
Negative Temperature Coefficient (NTC) Thermistors., Thermal cut offs and
Flexible Heaters

Thermocouples, Non-contact probes and RTDs
Megopak thermocouples, thermocouples with protecting tubes, Radiamatic/
Rayotube Sensors, and the platinum RTD 100 Ohm.

Toggle and Rocker Switches
MICRO SWITCH brand toggles, rockers and paddle switches for use anywhere
manual operation is desired. Military grade and environment sealed options
are available.

VRS Speed and Timing Sensors
Completely self-powered, VRS (magnetic) sensors are simple, rugged devices
that do not require an external voltage source for operation. They are generally
used to provide speed, timing or synchronization data to a display (or control
circuitry) in the form of a pulse train.

This list of our products is not exhasustive,
so check out our full range at
www.honeywell.com/sensing

HONEYWELL’S SENSOTEC RANGE OF SPECIALIST TEST AND MEASUREMENT PRODUCTS
The Honeywell Sensotec product range of industrial pressure transducers,
load cells and electronic sensor instrumentation is one of the broadest in the
world. We have a comprehensive range of strain gauge based, piezoelectric
and coil wound transducers. We offer pressure ranges to 170,000 psi and
load ranges to 3 million pounds with complete instrumentation and signal
conditioning. We achieve accuracies of 0.05 in pressure sensing, and our
calibration load cells have accuracies of 0.002 %.
Our unique expertise is in the packaging of our sensor technology, but we can
provide you with reliable engineered solutions whether they are standard offthe-shelf transducers developed for general applications or sensors developed
to meet unique requirements. The Sensotec range of transducers can be
designed to withstand the harshest environments such as temperatures as
low as –325 °F or as high as +425 °F, or ambient conditions up to 10,000 ft of
seawater.
For more information about these products visit

www.honeywell.com/sensotec

2

www.honeywell.com/sensing

Sales and Service
Honeywell serves its customers through a worldwide network of sales offices,
representatives and distributors. For application assistance, current
specifications, pricing or name of the nearest Authorised Distributor or Sales
Representative, contact your local sales office or:
INTERNET: www.honeywell.com/sensing
E-mail: info.sc@honeywell.com

ASIA PACIFIC

EUROPE

Control Products
Asia Pacific Headquarters
Phone: +(65) 6355-2828
Fax: +(65) 6445-3033

South Korea
Honeywell Korea Co Ltd
Phone: +(822) 799-6167
Fax: +(822) 792-9013

Australia
Honeywell Limited
Phone: +(61) 2-9370-4500
FAX: +(61) 2-9370-4525
Toll Free 1300-36-39-36
Toll Free Fax: 1300-36-04-70

Malaysia
Honeywell Engineering Sdn
Bhd
Phone: +(60-3) 7958-4988
Fax: +(60-3) 7958-8922

China – PRC - Beijing
Honeywell China Inc.
Phone: +(86-10) 8458-3280
Fax: +(86-10) 8458-3102
China – PRC - Shanghai
Honeywell China Inc.
Phone: (86-21) 6237-0237
Fax: (86-21) 6237-1237
China - Hong Kong S.A.R.
Honeywell Ltd.
Phone: +(852) 2953-6412
Fax: +(852) 2953-6767
Indonesia
Honeywell Indonesia Pte Ltd.
Phone: +(62) 21-535-8833
FAX: +(62) 21-5367 1008
India
TATA Honeywell Ltd.
Phone: +(91) 20 6870 445/
446
Fax: +(91) 20 681 2243/ 687
5992
Japan
Honeywell Inc
Phone: +(81) 3 5440 1425
Fax: +(81) 3 5440 1368

New Zealand
Honeywell Limited
Phone: +(64-9) 623-5050
Fax: +(64-9) 623-5060
Toll Free (0800) 202-088
Philippines
Honeywell Systems
(Philippines) Inc.
Phone: +(63-2) 636-1661 /
1662
Fax: +(63-2) 638-4013
Singapore
Honeywell South East Asia
Phone: +(65) 6355-2828
Fax: +(65) 6445-3033
Thailand
Honeywell Systems (Thailand)
Ltd.
Phone: +(662) 693-3099
FAX: +(662) 693-3085
Taiwan R.O.C.
Honeywell Taiwan Ltd.
Phone: +(886-2) 2245-1000
FAX: +(886-2) 2245-3242

Austria
Honeywell Austria GmbH
Phone: +(43) 1 727 80 366/
246
FAX: +(43) 1 727 80 337
Belgium
Honeywell SA/NV
Phone: +(32) 2 728 2522
FAX: +(32) 2 728 2502

NORTH AMERICA

LATIN AMERICA

Portugal
Honeywell Portugal Lda
Phone: +(351 21) 424 50 00
FAX: +(351 21) 424 50 99

Canada
Honeywell LTD
Phone: 1-800-737-3360
FAX: 1-800-565-4130

Argentina
Honeywell S.A.I.C.
Phone: +(54-11) 4383-3637
FAX: +(54-11) 4325-6470

Romania
Honeywell Bucharest
Phone: +(40) 1 2110076
FAX: +(40) 1 2103375

USA
Honeywell
Control Products,
International Headquarters
Phone: 1-800-537-6945
1-815-235-6847
FAX: 1-815-235-6545
E-mail:
info.sc@honeywell.com

Brazil
Honeywell do Brasil & Cia
Phone: +(55-11) 7266-1900
FAX: +(55-11) 7266-1905

Bulgaria
Honeywell EOOD
Phone: +(359) 2 979 00 23
FAX: +(359) 2 979 00 24

Commonwealth of
Independent States (CIS)
Z.A.O. Honeywell
Phone: +(7 095) 796 98 36
FAX: +(7 095) 797 99 06

Czech Republic
Honeywell spol. s.r.o.
Phone: +(420) 261 123 457
FAX: +(420) 261 123 461

Slovak Republic
Honeywell s.r.o.
Phone: +(421 2) 58 247 403
FAX: +(421 2) 58 247 415

Denmark
Honeywell A/S
Phone: +(45) 39 55 55 55
FAX: +(45) 39 55 55 58

South Africa (Republic of)
Honeywell Southern Africa
Honeywell S.A. Pty. Ltd
Phone: +(27) 11 695 8000
FAX +(27) 11 805 1504

Finland
Honeywell OY
Phone: +(358) 9 3480101
FAX: +(358) 9 34801375
France
Honeywell SA
Phone: +(33) 1 60 19 80 40
FAX: +(33) 1 60 19 81 73
Germany
Honeywell AG
Phone: +(49) 69 8064 444
FAX: +(49) 69 8064 442
Hungary
Honeywell Kft.
Phone: +(361) 451 43 00
FAX: +(361) 451 43 43
Italy
Honeywell S.p.A.
Phone: +(39) 02 92146 450/
456
FAX: +(39) 02 92146 490
The Netherlands
Honeywell B.V.
Phone: +(31) 20 565 69 11
FAX: +(31) 20 565 66 00
Norway
Honeywell A/S
Phone: +(47) 66 76 20 00
FAX: +(47) 66 76 20 90
Poland
Honeywell Sp. zo.o
Phone: +(48) 606 09 64
FAX: +(48) 606 09 01

Spain
Honeywell S.A.
Phone: +(34) 91 313 6100
FAX: +(34) 91 313 6129
Sweden
Honeywell AB
Phone: +(46) 8 775 55 00
FAX: +(46) 8 775 56 00
Switzerland
Honeywell AG
Phone: +(41) 1 855 24 40
FAX: +(41) 1 855 24 45

Chile
Honeywell Chile, S.A.
Phone: +(56-2) 233-0688
FAX: +(56-2) 231-6679
Columbia
Honeywell Columbia, S.A.
Phone: +(57-1) 623-3239/
3051
FAX: +(57-1) 623-3395
Ecuador
Honeywell S.A.
Phone: +(593-2) 981-560/1
FAX: +(593-2) 981-562
Mexico
Honeywell S.A. de C.V.
Phone: +(52) 55 5259-1966
FAX: +(52) 55 5570-2985
Puerto Rico
Honeywell Inc.
Phone: +(809) 792-7075
FAX: +(809) 792-0053
Venezuela
Honeywell CA
Phone: +(58-2) 238-0211
FAX: +(58-2) 238-3391

Turkey
Honeywell Turkey A.S.
Phone: +(90) 216 5756620
FAX: +(90) 216 5756637
Ukraine
Honeywell
Phone: +(380) 44 201 44 74
FAX: +(380) 44 201 44 75
United Kingdom
Honeywell Control Systems
Ltd
Phone: +(44) 1698 481481
FAX: +(44) 1698 481276
Mediterranean & African
Distributors
Honeywell SpA
Phone: +(39) 2 921 46 232
FAX: +(39) 2 921 46 233
Middle East Headquarters
Honeywell Middle East Ltd.
Phone: +(9712) 443 2119
FAX +(9712) 443 2536

Inside back cover
www.honeywell.com/sensing

3

Warranty/Remedy
Honeywell warrants goods of its manufacture as being free of defective
material and faulty workmanship. Contact your local sales office for warranty
information. If warranted goods are returned to Honeywell during that period
of coverage, Honeywell will repair or replace without charge those items it
finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all
other warranties, expressed or implied, including those of merchantability
and fitness for a particular purpose.
While we provide application assistance, personally, through our literature
and the Honeywell web site, it is up to the customer to determine the suitability
of the product in the application.
Specifications may change at any time without notice. The information
we supply is believed to be accurate and reliable as of this printing. However,
we assume no responsibility for its use.

YOUR HONEYWELL CONTACT:

1-800-537-6945
1-815-235-6847
info.sc@honeywell.com
www.honeywell.com/sensing

This publication does not constitute a contract between Honeywell and its customers. The contents may be changed at any time without notice. It is the
customer’s responsibility to ensure safe installation and operation of the products. Detailed mounting drawings of all products illustrated are available on
request.
© 2003 Honeywell International Inc.

Sensing and Control
Honeywell Inc
11 West Spring Street
Freeport, Illinois 61032
USA

Honeywell Control Systems Ltd
Newhouse Industrial Estate
Motherwell ML1 5SB
Scotland, UK
www.honeywell.com/sensing

100456-EN Issue 1

07/03

UK07

GLO

Printed on environmentally friendly paper



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 148
Page Mode                       : UseThumbs
Page Layout                     : TwoColumnRight
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:2ec01838-9a0a-4a82-8ae5-5a4757051f0f
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Create Date                     : 2003:08:01 12:03:00Z
Modify Date                     : 2005:01:24 11:19:20+01:00
Metadata Date                   : 2005:01:24 11:19:20+01:00
Creator Tool                    : PageMaker 6.5
Document ID                     : uuid:2fb83211-ea55-4e30-929e-2bc309b4a1fe
Format                          : application/pdf
Creator                         : cmccallu
Title                           : Indcat_part1.p65
Author                          : cmccallu

EXIF Metadata provided by EXIF.tools