Honeywell Voyager 1250G Users Manual Single Line Laser Scanner User's Guide

2015-01-23

• VoyagerTM 1250g User's Guide
  • Table of Contents
    • Getting Started
      • About This Manual
      • Unpacking Your Device
      • Connecting the Device
        • Connecting with USB
        • Connecting with Keyboard Wedge
        • Connecting with RS232 Serial Port
        • Connecting with RS485
      • Reading Techniques
      • Menu Bar Code Security Settings
      • Setting Custom Defaults
      • Resetting the Custom Defaults
      • Resetting the Factory Defaults
    • Programming the Interface
      • Introduction
      • Programming the Interface - Plug and Play
        • Keyboard Wedge
        • IBM PS2 Keyboard
        • RS232 Serial Port
        • RS485
        • OPOS Mode
        • USB IBM SurePos
        • IBM Secondary Interface
        • USB PC or Macintosh Keyboard
        • USB HID
        • HID Fallback Mode
      • USB Serial Commands
        • USB Serial Emulation
        • CTS/RTS Emulation
        • ACK/NAK Mode
        • Communication Timeout
        • NAK Retries
        • Support BEL/CAN in ACK/NAK
      • Verifone® Ruby Terminal Default Settings
      • Gilbarco® Terminal Default Settings
      • Honeywell Bioptic Aux Port Configuration
      • Datalogic™ Magellan© Bioptic Aux Port Configuration
      • NCR Bioptic Aux Port Configuration
      • Wincor Nixdorf Terminal Default Settings
      • Wincor Nixdorf Beetle™ Terminal Default Settings
      • Keyboard Country Layout
      • Keyboard Wedge Modifiers
        • ALT Mode
        • Keyboard Style
        • Keyboard Conversion
        • Keyboard Modifiers
        • Inter-Scan Code Delay
        • <F0> Break Character
        • Keyboard Wedge Defaults
      • RS232 Modifiers
        • RS232 Baud Rate
        • RS232 Word Length: Data Bits, Stop Bits, and Parity
        • RS232 Handshaking
        • RS232 Timeout
        • XON/XOFF
        • ACK/NAK
        • Communication Timeout
        • NAK Retries
        • Support BEL/CAN in ACK/NAK
        • RS232 Defaults
      • NCR Modifiers
        • NCR ACK/NAK
        • Block Check Character
        • NCR Prefix
        • NCR Suffix
        • NCR Prefix/Suffix
        • NCR NOF (Not-on-File) Error
      • Scanner to Bioptic Communication
        • Scanner-Bioptic Packet Mode
        • ACK/NAK
        • Communication Timeout
    • Input/Output Settings
      • Power Up Beeper
      • Beep on BEL Character
      • Good Read and Error Indicators
        • Beeper – Good Read
        • Beeper Volume – Good Read
        • Beeper Pitch – Good Read
        • Beeper - Transmit Order
        • Beeper Pitch – Error
        • Beeper Duration – Good Read
        • Number of Beeps – Good Read
        • Number of Beeps – Error
      • LED Indicators
        • LED Settings
        • LED Brightness
      • In-Stand and Out-Of-Stand Settings
        • In-Stand and Out-of-Stand Defaults
        • Presentation Modes
        • Manual Activation Mode
        • End Manual Activation After Good Read
        • Manual Activation Laser Timeout - Button Settings
        • CodeGate®
        • Object Detection Mode
        • End Object Detection After Good Read
        • Object Detection Laser Timeout
        • Object Detection Distance
      • Character Activation Mode
        • Activation Character
        • End Character Activation After Good Read
        • Character Activation Laser Timeout
      • Character Deactivation Mode
        • Deactivation Character
      • Reread Delay
      • User-Specified Reread Delay
      • Output Sequence Overview
        • Require Output Sequence
        • Output Sequence Editor
        • To Add an Output Sequence
        • Other Programming Selections
        • Output Sequence Editor
        • Sequence Timeout
        • Sequence Match Beeper
        • Partial Sequence
        • Require Output Sequence
      • No Read
    • Data Editing
      • Prefix/Suffix Overview
        • To Add a Prefix or Suffix:
        • To Clear One or All Prefixes or Suffixes
        • To Add a Carriage Return Suffix to All Symbologies
      • Prefix Selections
      • Suffix Selections
      • Transmit Alternate Extended ASCII Characters
      • Function Code Transmit
      • Communication Check Character
      • Intercharacter, Interfunction, and Intermessage Delays
        • Intercharacter Delay
        • User Specified Intercharacter Delay
        • Interfunction Delay
        • Intermessage Delay
    • Data Formatting
      • Data Format Editor Introduction
      • To Add a Data Format
        • Other Programming Selections
      • Terminal ID Table
      • Data Format Editor Commands
        • Move Commands
        • Search Commands
        • Miscellaneous Commands
      • Data Formatter
        • Data Format Non-Match Error Tone
      • Primary/Alternate Data Formats
        • Single Scan Data Format Change
    • Symbologies
      • All Symbologies
      • Message Length Description
      • Codabar
        • Codabar Concatenation
      • Code 39
        • Code 32 Pharmaceutical (PARAF)
        • Full ASCII
      • Interleaved 2 of 5
      • NEC 2 of 5
      • Code 93
      • Straight 2 of 5 Industrial (three-bar start/stop)
      • Straight 2 of 5 IATA (two-bar start/stop)
      • Matrix 2 of 5
      • Code 11
      • Code 128
      • ISBT 128
      • GS1-128
      • Telepen
      • UPC-A
      • UPC-A/EAN-13 with Extended Coupon Code
        • UPC-A Number System 4 Addenda Required
        • UPC-A Number System 5 Addenda Required
      • UPC-E0
      • EAN/JAN-13
        • EAN-13 Beginning with 2 Addenda Required
        • EAN-13 Beginning with 290 Addenda Required
        • EAN-13 Beginning with 378/379 Addenda Required
        • EAN-13 Beginning with 414/419 Addenda Required
        • EAN-13 Beginning with 434/439 Addenda Required
        • EAN-13 Beginning with 977 Addenda Required
        • EAN-13 Beginning with 978 Addenda Required
        • EAN-13 Beginning with 979 Addenda Required
        • ISBN Translate
        • ISSN Translate
      • EAN/JAN-8
      • MSI
      • Plessey Code
      • GS1 DataBar Omnidirectional
      • GS1 DataBar Limited
      • GS1 DataBar Expanded
      • Trioptic Code
      • GS1 Emulation
      • Postal Codes
        • China Post (Hong Kong 2 of 5)
    • Interface Keys
      • Keyboard Function Relationships
      • Supported Interface Keys
    • Utilities
      • To Add a Test Code I.D. Prefix to All Symbologies
      • Show Software Revision
      • Show Data Format
      • Test Menu
      • EZConfig-Scanning Introduction
        • Installing EZConfig-Scanning from the Web
    • Serial Programming Commands
      • Conventions
      • Menu Command Syntax
      • Query Commands
        • Responses
      • Serial Trigger Commands
        • Read Time-Out
      • Resetting the Standard Product Defaults
      • Menu Commands
    • Product Specifications
      • Voyager 1250g Scanner Product Specifications
      • Standard Cable Pinouts
        • Keyboard Wedge
        • Serial Output
        • RS485 Output
        • USB
    • Maintenance
      • Repairs
      • Maintenance
        • Cleaning the Device:
        • Inspecting Cords and Connectors
      • Replacing Cables
        • Replacing an Interface Cable
      • Troubleshooting a Voyager Scanner
    • Customer Support
    • Reference Charts
      • Symbology Chart
      • ASCII Conversion Chart (Code Page 1252)
      • Code Page Mapping of Printed Barcodes
    • Sample Symbols
    • Programming Chart