Honeywell LXE-VM1 Wireless Vehicle Mount Terminal User Manual Draft CE
Honeywell International, Inc. Wireless Vehicle Mount Terminal Draft CE
Contents
- 1. User Manual
- 2. User Guide
User Guide
User’s Manual CV41C With Microsoft® Windows® Embedded CE Operating System 1 Using the Vehicle Mount Computer This chapter introduces the CV41C Vehicle Mount Computer with Windows® CE operating system. Use this chapter to learn about the basic features and available accessories. Chapter 1 — Using the Vehicle Mount Computer About the CV41C Vehicle Mount Computer The rugged CV41C Vehicle Mount Computer is designed for real-time data collection applications in warehousing, distribution, work-in-process, time and attendance, and stationary applications. The CV41C is highly configured and runs on the Microsoft Windows CE operating system. Additionally, the CV41C supports the use of terminal emulation applications, browser-based applications, or custom applications. Overview of the CV41C Features The CV41C includes these standard features: • • • • • • 8” color display with a resolution of 800 x 480. Two USB ports, two COM ports, a CANBUS port, an Ethernet port, a headphone jack, and a microphone jack 1 GB of RAM expandable to 2 GB of RAM Customer-accessible SD slot for memory cards up to 32 GB 802.11a/b/g, Bluetooth®, GPS, and WWAN radios Intel Atom 1.6 GHz processor The CV41C Vehicle Mount Computer has an IEEE 802.11a/b/g radio installed and Wi-Fi® certified for interoperability with other 802.11a/b/g wireless LAN devices. CV41C Vehicle Mount Computer User Guide Chapter 1 — Using the Vehicle Mount Computer CV41C Front View Callout Description Power button Speakers Ambient light sensor Microphone CV41C Vehicle Mount Computer User Guide Chapter 1 — Using the Vehicle Mount Computer CV41C Back View with Quick Mount Smart Dock Callout Description Antenna connectors SIM card access panel COM 1 COM 2 USB connector CAN/audio connector Quick release handle Provision for padlock Provision for laptop security cable 10 Power switch 11 Power connector 12 Fuse 13 SD card access panel 14 Strain relief clamp 15 RAM ball CV41C Vehicle Mount Computer User Guide Chapter 1 — Using the Vehicle Mount Computer About the LEDs The LEDs on the CV41C tell the state of the computer. Use this section to learn about the connection and system LEDs. Connection LEDs Connection LED Status Descriptions Callout LED State Description WWAN Solid green The CV41C is connected to WWAN. Off The CV41C is not connected to WWAN. Solid amber The CV41C is connected to Wi-Fi. Off The CV41C is not connected to Wi-Fi. Wi-Fi Bluetooth Blinking slowly Bluetooth is paired but not connected to a device. Blinking medium Bluetooth is paired and connected to a device. Blinking fast Bluetooth is discovering a device. Off Bluetooth hardware has been turned off. CV41C Vehicle Mount Computer User Guide Chapter 1 — Using the Vehicle Mount Computer System LEDs Connection LED Status Descriptions Callout LED State Solid green System Description The CV41C is on, or the CV41C is on but the backlight or display may be off. Blinking green The CV41C is in suspend mode, or external power every 4.5 seconds is not present. Blinking green The CPU temperature is less than -20°C (-4°F), the every 1.5 seconds heater is warming the CPU for 30 seconds, or the CV41C needs to be moved to a warmer environment. UPS SSD Off The CV41C is off, external power is not present, or it is in suspend mode. Solid green (External power present) The UPS battery is charging. (External power not present) The CV41C is off or the UPS battery is not present. Solid amber (External power present) There is no UPS battery present, the CV41C is out of charging temperature range, a charge timeout has occurred, or there is a charging fault. (External not present) UPS battery is supplying power and is discharging. Off The UPS battery is fully charged, or it is not charging. Read or write activity is occurring. Flashing green CV41C Vehicle Mount Computer User Guide Chapter 1 — Using the Vehicle Mount Computer Callout LED State Description Off There is no read or write activity. CV41C Accessories The CV41C does not ship with any accessories. All accessories are sold and ordered separately. For help, contact your local Intermec sales representative. CV41C Accessories Accessory Description Quick Mount Smart Dock The smart dock provides a mount for the CV41C, and supplies conditioned power to the CV41C. For more information, see the CV41C Mounting Kit Reference Guide. RAM Mounting Kit Use this mounting kit to attach the CV41C to a variety of surfaces, including a vehicle or to your desktop. For more information, see the CV41C Mounting Kit Reference Guide. U-Bracket Mounting Kit Use this mounting kit to attach the CV41C to a vehicle such as a forklift. For more information, see the CV41C Mounting Kit Reference Guide. 10-60 VDC Power Connection Kit Use this kit to supply 10-60 VDC power to the CV41C. 72-144 VDC Power Connection Kit Use this kit to supply 72-144 VDC power to the CV41C. AC Power Supply Use the AC power supply to power to the CV41C. The power supply can be connected to a 120V or to a 230 V supply. If you are outside of the United States, you must supply your own power cord. Mounting the CV41C To properly mount the CV41C to a desktop or vehicle, you must purchase the smart dock and one of the following mounting kits: • RAM Mounting Kit CV41C Vehicle Mount Computer User Guide Chapter 1 — Using the Vehicle Mount Computer • U-Bracket Mounting Kit For more information on installing the smart dock and mounting kits, see the CV41C Mounting Kit Reference Guide. Connecting the CV41C to Power For the CV41C to operate, you must attach it to the smart dock and provide power to the CV41C through a DC/DC power supply or an AC/DC power supply. There are three power options for the CV41C. You must order one of these power options separately: • 10-60 VDC Power Connection Kit • 72-144 VDC Power Connection Kit • AC Power Supply For more information on installing the DC power options, see the CV41C Vehicle Mounting Kit Reference Guide. Once you have connected the smart dock to power and attached the CV41C to the smart dock, press the Power switch on the back of the smart dock to supply power to the CV41C. About the Internal UPS Battery The CV41C contains an internal UPS battery that is automatically charged when the CV41C is placed in a powered smart dock. The UPS battery can power the CV41C for a minimum of 30 minutes at -20°C (-4°F) or higher. The UPS battery allows you to continue using the CV41C when not mounted in a dock or when the vehicle battery is being changed. If the UPS battery becomes critically low on power, the CV41C performs a controlled shutdown. You can recharge it by placing the CV41C back into the smart dock. You can fully charge a discharged UPS battery in approximately 4 hours. Maximizing the Internal UPS Battery Usage You can maximize the internal UPS battery usage by changing the battery power scheme. CV41C Vehicle Mount Computer User Guide Chapter 1 — Using the Vehicle Mount Computer To set the battery power scheme: 1 Tap Start > Settings > Control Panel. The Control Panel Screen appears. 2 Tap Power. The Power Properties screen appears. 3 Tap the Schemes tab. 4 In the Power Scheme drop-down menu, select Battery Power. 5 Adjust the User Idle, System Idle, and Suspend times by selecting the desired times in the drop-down menus. 6 Tap OK when you are finished to save your changes and exit the Power Properties screen. About the Backup Battery The CV41C has a permanent Lithium-Ion battery installed to maintain the time, date, and CMOS setup information for a minimum of 90 days. The Lithium-Ion battery is not user-replaceable and should last five years before it needs replacement. The backup battery must only be changed by authorized service personnel. For more information, contact your local Intermec service representative. Installing an SD Card You can use an SD card to increase file storage and install software. The computer supports an optional 32 GB maximum capacity SD card. To install an SD card on the CV41C: 1 Remove the CV41C from the smart dock. 2 Press the Power button to place the CV41C in Suspend mode. 3 Using a small Phillips screwdriver, remove the two screws that secure the SD card access panel. CV41C Vehicle Mount Computer User Guide Chapter 1 — Using the Vehicle Mount Computer SD card access panel 4 Insert the SD card into the SD card slot. SD card slot 5 Reattach the SD Card Access Panel and torque the screws to 4-5 in/lbs. 6 Attach the CV41C back into the smart dock. 7 Press the Power button to resume the CV41C from Suspend mode. About the Phone The CV41C supports UMTS cellular technology. The phone features include a speaker and a microphone. You can also use a Bluetooth headset or hands-free kit. 10 CV41C Vehicle Mount Computer User Guide Chapter 1 — Using the Vehicle Mount Computer Activating the UMTS Phone You can use a SIM card to activate the UMTS phone on your computer. You can purchase the SIM card from your network provider. To install the SIM card and activate the UMTS radio: 1 Remove the CV41C from the smart dock. 2 Press the Power button to place the CV41C in Suspend mode. 3 Using a small Phillips screwdriver, remove the SIM Card Access Panel. SIM card access panel 4 Insert a SIM card into the SIM Card Slot. 5 Reattach the SIM Card Access Panel and torque the screws to 4-5 in/lbs. CV41C Vehicle Mount Computer User Guide 11 Chapter 1 — Using the Vehicle Mount Computer 6 Attach the CV41C back into the smart dock. 7 Press the Power button to resume the CV41C from Suspend mode. Adjusting the Volume You can change the CV41C volume, for sounds you hear when you tap the screen or scan bar codes with a scanner, to adjust to your needs and the environment. To adjust the volume: 1 On the keypad, tap the ALT key to enable the secondary keys. F9 key F10 key ALT key 2 Tap F9 to increase volume or F10 to decrease the volume. 3 Repeat Steps 1 and 2 to increase or decrease volume. About the Touch Screen 8” color touch screen display with a resolution of 800 x 640 pixels. The display also comes with a heater to reduce condensation on the external surface of the display when moving between sub-freezing temperatures and normal temperatures. 12 CV41C Vehicle Mount Computer User Guide Chapter 1 — Using the Vehicle Mount Computer If you are going to use the CV41C in extreme cold conditions for an extended period of time, you should turn on the power at room temperature for at least 15 minutes prior to using it. This process of “warming up” helps preserve the lighting on the display. The default screen appears on the display when you turn on the CV41C. This screen appears unless you are running ITE. If you have installed ITE, it launches after the initial booting process. Windows CE Default Screen on the CV41C Windows CE tasbar Enabling the Defroster If your CV41C contains an optional defroster, you can use it to help reduce condensation on an external surface when you are moving between sub-freezing and normal temperatures. To enable the defroster: 1 Tap Start > Settings > Control Panel. The Control Panel screen appears. 2 Double-tap Peripherals. The Peripherals screen appears. 3 Verify that a defroster is installed. If it is installed, enable it by selecting Enabled. 4 Set the Defroster trip point in degrees Celsius. When the temperature reaches the defroster trip point, the defroster automatically turns on. 5 Tap OK to save and exit the Peripherals screen. CV41C Vehicle Mount Computer User Guide 13 Chapter 1 — Using the Vehicle Mount Computer Navigating the Touch Screen Use a stylus or your fingers to navigate the touch screen on the CV41C. Touch Screen Navigation Action Description Tap Touch the screen once with the stylus or finger to select options, open or close applications, or launch menus. Double tap Double tap the screen with the stylus or your finger to launch applications. Drag Hold the stylus or your finger on the screen and drag across the screen to select text and images. Tap and hold Tap and hold the stylus or your finger on an item to see a menu of actions available for that item. On the pop-up menu that appears, tap the action you want to perform. Adjusting the Screen Brightness By default, the CV41C has a built-in ambient light sensor that adjusts the screen brightness automatically depending on the current lighting conditions. You can adjust the brightness of the screen manually if you do not want to use this feature. To adjust the screen brightness manually: 1 On the keypad, tap the ALT key to enable the secondary keys. 14 CV41C Vehicle Mount Computer User Guide Chapter 1 — Using the Vehicle Mount Computer F7 key F8 key ALT key 2 Tap F7 to increase brightness or F8 to decrease the brightness. 3 Repeat Steps 1 and 2 to increase or decrease volume. Installing an External Antenna You can purchase an a WI-FI or GPS antenna to mount on a wall, forklift, or other flat surface using either screws or small patches of adhesive-backed hook and loop fastener material. Since system performance and antenna polarization are site-dependent, a permanent mounting location may require some experimentation. In most fixed installations, you should mount the antenna initially in a vertically-polarized position, with the cable from the antenna parallel to the floor and ceiling. For information on purchasing an antenna, contact your local Intermec sales representative. To connect an external antenna: 1 Secure the antenna to one of the antenna plugs on the CV41C. CV41C Vehicle Mount Computer User Guide 15 Chapter 1 — Using the Vehicle Mount Computer Wi-Fi antenna plug Wi-Fi (aux) antenna plug GPS antenna plug WWAN plug 2 Using your own hardware, secure the external antenna to a wall, forklift, or other flat surface. About the Keypad The CV41C comes with one standard keypad overlay. The computer has a keypad backlight for low light conditions. By default, the keypad is enabled. You can disable the keypad backlight to conserve power. 16 CV41C Vehicle Mount Computer User Guide Chapter 1 — Using the Vehicle Mount Computer CV41C Keypad Overlay Enabling or Disabling the Keypad Backlight You can enable or disable the keypad backlight to conserve power. To enable or disable the keypad backlight: 1 Tap Start > Control Panel. The Control Panel screen appears. 2 Double-tap Power. The Power menu appears. 3 Select the Schemes tab. 4 Select the check box to enable the keypad backlight. Clear the check box to disable the backlight. 5 Tap OK to save your changes and exit the Options screen. Setting the Keypad Backlight Timer The keypad backlight and the display backlight share the same timer. When the display is on, the keypad backlight is also on. Use this section to learn how to set the keypad backlight timer. To set the keypad backlight timer: 1 Tap Start > Control Panel. The Control Panel screen appears. CV41C Vehicle Mount Computer User Guide 17 Chapter 1 — Using the Vehicle Mount Computer 2 Double-tap Power. The Power Properties screen appears. 3 Adjust the User Idle, System Idle, and Suspend times by selecting the desired times in the drop-down menus. 4 Tap OK when you are finished to save your changes and exit the Power Properties screen. Entering Characters on the Keypad You need to use the orange modifier key and the ALT key to access all characters and functions on the keypad. To type a character: • Press a key for that character. To type a character or access a function on the overlay: Press the Orange or ALT key and then press the key for the character or function. To type an uppercase letter: • • Press the Up Arrow on the keypad and then press the key to type an uppercase character. Rebooting the Computer If you are experiencing problems with the CV41C, you can perform a warm boot or restart. Warm Booting the CV41C When you perform a warm boot, the CV41C reboots without erasing any registry data, configuration settings, data in RAM storage, and cab files that were installed. Networking sessions are lost, and any data in applications that were running may be lost if they were not saved. To perform a warm boot: 1 Tap Start > Settings > Control Panel. The Control Panel screen appears. 2 Double-tap Registry. The Registry screen appears. 3 Tap Warm Boot to warm boot the CV41C. 18 CV41C Vehicle Mount Computer User Guide Chapter 1 — Using the Vehicle Mount Computer Restarting the CV41C When you perform a restart, the CV41C reboots without erasing any registry data and configuration settings. The data in RAM storage is lost, networking sessions are lost, cab files are reloaded, and any data in applications that were running may be lost if they were not saved reloaded. To perform a restart: 1 Tap Start > Settings > Control Panel. The Control Panel screen appears. 2 Double-tap Registry. The Registry screen appears. 3 Tap Restart to restart the CV41C. Physical and Environmental Specifications Physical Dimensions Dimensions 26.8 x 21.4 x 1.7 cm (10.6 x 8.4 x 6.6 in) Weight 2.1 kg (5.6 lbs) Environmental Specifications Standard Operating temperature Non-condensing: -20°C to 50°C (-4°F to 122°F) Extreme operating temperature Condensing: -30°C to 50°C (-22°F to 122°F) Storage temperature Non-condensing: -30°C to 60°C (-22°F to 148°F) Relative humidity Up to 90% non- condensing at 40°C (104°F) with extended temperatures up to 100% Water and dust IP66 ESD 15 kV Vibration MIL-STD-810F, composite wheeled vehicles Crash SAE-J 1455 CV41C Vehicle Mount Computer User Guide 19 Chapter 1 — Using the Vehicle Mount Computer Power and Electrical Specifications Input power DC input voltage: 10-60 VDC Input current: 4.6 Amps Input fuse: 10 A time delay External power supply AC adapter: 120-240 VAC to 12 VDC Backup battery (CMOS) Internal lithium-ion battery Operating System Microsoft Windows CE 6.0 Hardware Processor Intel Atom CPU at 1.6 GHz Memory 1 GB expandable to 2 GB SDRAM Removable storage Compact Flash or Secure Digital Touch Screen Specifications 8” color WVGA display with a resolution of 800 x 480 pixels, with optional heated display. Standard Communications • • • • 802.11a/b/g Bluetooth USB Serial Wireless LAN Data rates Supports all 802.11a/b/g data rates. Security WPA, WPA2, 802.1x (EAP-TLS, TTLS, LEAP, PEAP, EAP-FAST), WEP 20 CV41C Vehicle Mount Computer User Guide Regulatory Notices and Safety Information Regulatory Notices and Safety Information Waste Electrical and Electronic Equipment (WEEE) Important: This symbol is placed on the product to remind users to dispose of Waste Electrical and Electronic Equipment (WEEE) appropriately, per Directive 2002-96-EC. In most areas, this product can be recycled, reclaimed and re-used when properly discarded. Do not discard labeled units with trash. For information about proper disposal, contact your supplier. Class B Digital Device NOTICE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. 2. This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTICE Changes or modifications made to this equipment not expressly approved by Intermec may void the FCC authorization to operate this equipment. EMC Directive Requirements This is a Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Canada, Industry Canada (IC) Notices This Class B digital apparatus complies with Canadian RSS-GEN issue 3:2010 and RSS-210 issue 8:2010. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Radio Frequency (RF) Exposure Information The radiated output power of the CV41C is below the Industry Canada (IC) radio frequency exposure limits. The CV41C should be used in such a manner such that the potential for human contact during normal operation is minimized. CV41C Vehicle Mount Computer User Guide 21 Regulatory Notices and Safety Information This device has been certified for use in Canada. Status of the listing in the Industry Canada’s REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng Additional Canadian information on RF exposure also can be found at the following web address: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html Canada, avis d'Industry Canada (IC) Cet appareil numérique de classe B est conforme aux normes canadiennes RSS-GEN numéro 3:2010 et RSS-210 numéro 8:2010. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son fonctionnement. Informations concernant l'exposition aux fréquences radio (RF) La puissance de sortie émise par de le CV41C est inférieure à la limite d'exposition aux fréquences radio d'Industry Canada (IC). Utilisez le CV41C de façon à minimiser les contacts humains lors du fonctionnement normal. Ce périphérique est homologué pour l'utilisation au Canada. Pour consulter l'entrée correspondant à l’appareil dans la liste d'équipement radio (REL - Radio Equipment List) d'Industry Canada rendez-vous sur: http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng Pour des informations supplémentaires concernant l'exposition aux RF au Canada rendez-vous sur : http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html ANATEL (Brazil) Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não causar interferência a sistema operando em caráter primário. Li-Ion Battery When disposing of the CV41C main battery, the following precautions should be observed: The battery should be disposed of properly. The battery should not be disassembled or crushed. The battery should not be heated above 212°F (100°C) or incinerated. R&TTE Directive Requirements (Applies only to equipment operated within the EU/EFTA) Information to User A label on the exterior of the device should resemble one of the labels shown below (the label contains the part number of the installed radio card). The labels shown below and affixed to the device, identify where the device may be used and where its use is restricted. Use of a device is prohibited in countries not listed below or otherwise identified by the label. (May or may not include the 0560 Notified Body Number. Substitute 4 digit Notified Body Number may also be applied.) RF Safety Notice This device is intended to transmit RF energy. For protection against RF exposure to humans and in accordance with FCC rules and Industry Canada rules, this transmitter should be installed such that a minimum separation distance of at least 20 cm (7.8 in.) is maintained between the antenna and the general population. This device can only be co-located with FCC ID:TWG-SDCMSD30G. 22 CV41C Vehicle Mount Computer User Guide
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Author : kvu Create Date : 2006:08:31 18:38:42Z Modify Date : 2012:01:12 06:54:45-05:00 Has XFA : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : FrameMaker 8.0 Metadata Date : 2012:01:12 06:54:45-05:00 Producer : Acrobat Distiller 9.0.0 (Windows) Format : application/pdf Title : Draft_CE.fm Creator : kvu Document ID : uuid:921634a9-a363-4062-8006-2d3d6ff5a3b4 Instance ID : uuid:b2870b0a-ca13-45b9-80df-3fce744d33d1 Page Layout : SinglePage Page Mode : UseOutlines Page Count : 24EXIF Metadata provided by EXIF.tools