Honeywell LXE4830P 802.11g Compact Flash Module User Manual E EQ HX1OGWW A

Download:
Mirror Download [FCC.gov]
Document ID	696036
Application ID	fYfLiLPiu9aUoBRzWfUOdg==
Document Description	Manual HX1 rev3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	104.21kB (1302577 bits)
Date Submitted	2006-08-22 00:00:00
Date Available	2006-08-22 00:00:00
Creation Date	2006-08-17 13:42:15
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2006-08-17 13:44:53
Document Title	E-EQ-HX1OGWW-A
Document Creator	Acrobat PDFMaker 7.0.7 for Word
Document Author:	mrs3837

FOR REVIEW ONLY – DO NOT PUBLISH OR DISTRIBUTE
DRAFT 09
For ENG/CERT Review - Do Not Distribute - Draft 09
HX1 User’s Guide
Copyright © August 2006 by LXE Inc.
All Rights Reserved
E-EQ-HX1OGWW-A
LANGUAGE: ENGLISH
Notices
For ENG/CERT Review - Do Not Distribute - Draft 09
Notice:
LXE Inc. reserves the right to make improvements or changes in the products described in this manual at any time
without notice. While reasonable efforts have been made in the preparation of this document to assure its
accuracy, LXE assumes no liability resulting from any errors or omissions in this document, or from the use of the
information contained herein. Further, LXE Incorporated, reserves the right to revise this publication and to make
changes to it from time to time without any obligation to notify any person or organization of such revision or
changes.
Copyright Notice:
This manual is copyrighted. All rights are reserved. This document may not, in whole or in part, be copied,
photocopied, reproduced, translated or reduced to any electronic medium or machine-readable form without prior
consent, in writing, from LXE Inc.
Copyright © 2006 by LXE Inc. An EMS Technologies Company.
125 Technology Parkway, Norcross, GA 30092 U.S.A. (770) 447-4224
Trademarks:
LXE® is a registered trademark of LXE Inc.
Voxware, VoxBrowser and VoxManager are registered trademarks of Voxware, Inc. 185 Alewife Brook Parkway,
Cambridge, MA.
Microsoft, Windows and the Windows logo are registered trademarks of Microsoft Corporation in the United
States and/or other countries.
All other brand or product names are trademarks or registered trademarks of their respective companies or
organizations. When this manual is in PDF format: “Acrobat ® Reader Copyright © 1987-2006 Adobe Systems
Incorporated. All rights reserved. Adobe, the Adobe logo, Acrobat, and the Acrobat logo are trademarks of Adobe
Systems Incorporated.” applies.
The user is strongly cautioned to read Appendix B, “Regulatory Notices and Safety
Information”. Important safety cautions, warnings and regulatory information is
contained in Appendix A.
Important: This symbol is placed on the product to remind users to dispose of Waste Electrical
and Electronic Equipment (WEEE) appropriately, per Directive 2002-96-EC. In most areas, this
product can be recycled, reclaimed and re-used when properly discarded. Do not discard labeled
units with trash. For information about proper disposal, contact LXE through your local sales
representative, or visit www.lxe.com.
Table of Contents
For ENG/CERT Review - Do Not Distribute - Draft 09
THE HX1 HANDS FREE COMPUTER
Overview .................................................................................................................... 1
Document Conventions ............................................................................................................2
Environmental Specifications...................................................................................................3
Quick Start................................................................................................................. 4
Components .............................................................................................................. 5
Top View ..................................................................................................................................5
End View ..................................................................................................................................5
About Lithium-Ion Batteries..................................................................................... 6
Install Battery ...........................................................................................................................6
Changing the Battery ................................................................................................................8
Battery Care Procedures ...........................................................................................................8
The HX1 Multi-Charger ...........................................................................................................9
Attach Headset........................................................................................................ 10
Adjust Microphone and Secure Cable ....................................................................................11
Belt Carrying Case .................................................................................................. 12
Powering On the HX1 ............................................................................................. 14
Suspend /Resume Button........................................................................................................14
Power LED ...........................................................................................................................14
Resetting the HX1...................................................................................................................15
Entering Data........................................................................................................... 16
Getting Help............................................................................................................. 16
Manuals and Accessories ...................................................................................... 16
Manuals...................................................................................................................................16
Accessories .............................................................................................................................16
APPENDIX A REGULATORY NOTICES AND SAFETY INFORMATION
21
Approvals ................................................................................................................ 22
APPENDIX B END USER LICENSE AGREEMENTS (EULAS)
29
Voxware VoxBrowser and VoxManager End-User License Agreement ............. 29
LXE Equipment Software License Agreement ..................................................... 33
E-EQ-HX1OGWW-A
HX1 User’s Guide
ii
Table of Contents
INDEX
35
For ENG/CERT Review - Do Not Distribute - Draft 09
Illustrations
Figure 1 The HX1 Hands-Free Computer............................................................................................................1
Figure 2 HX1 Components ..................................................................................................................................5
Figure 3 HX1 Connectors ....................................................................................................................................5
Figure 4 The HX1 Battery ...................................................................................................................................6
Figure 5 Inserting the Battery Pack......................................................................................................................6
Figure 6 Snap the Battery Pack into the HX1 ......................................................................................................7
Figure 7 Removing the Battery Pack ...................................................................................................................7
Figure 8 The HX1 Multi-Charger ........................................................................................................................9
Figure 9 Lower Audio Cable .............................................................................................................................10
Figure 10 Headset ..............................................................................................................................................10
Figure 11 The Belt Carrying Case .....................................................................................................................12
Figure 12 HX1 and Antenna in Case .................................................................................................................13
Figure 13 Adjusting the Belt..............................................................................................................................13
HX1 User’s Guide
E-EQ-HX1OGWW-A
The HX1 Hands Free Computer
Overview
For ENG/CERT Review - Do Not Distribute - Draft 09
The HX1 “Hands Free”/voice device is a rugged, wearable computer equipped with a Microsoft®
Windows® CE .NET operating system. The HX1 is a customized computer designed to gather
voice data and transmit the data via a wireless PCMCIA radio (spread spectrum 2.4GHz) to a
voice server.
The HX1 is designed for heads up, hands free operation. The HX1 includes a headset. The
headset’s speaker relays voice instructions to the user and the user speaks the responses into the
headset’s microphone. A keyboard, display and touchscreen are not necessary for operation and
are not included in the HX1.
The HX1 provides power and functionality in a small package, using a 400 MHz Intel® X-Scale
PXA255 Processor.
Figure 1 The HX1 Hands-Free Computer
E-EQ-HX1OGWW-A
HX1 User’s Guide
2
Overview
Document Conventions
This reference guide uses the following document conventions:
ALL CAPS
Menu|Choice
For ENG/CERT Review - Do Not Distribute - Draft 09
"Quotes"
All caps are used to represent disk directories, file names, and application
names.
Rather than use the phrase "choose the Save command from the File menu",
this manual uses the convention "choose File|Save".
Indicates the title of a book, chapter or a section within a chapter (for
example, "Document Conventions").
Indicates a key on the keyboard (for example,  ).
Indicates a reference to other documentation.
Differences in operation or commands due to radio type.
ATTENTION
Keyword that indicates vital or pivotal information to follow.
Attention symbol that indicates vital or pivotal information to follow. Also,
when marked on product, means to refer to the manual or user’s guide.
International fuse replacement symbol. When marked on the product, the
label includes fuse ratings in volts (v) and amperes (a) for the product.
Note:
Caution
WARNING
DANGER
HX1 User’s Guide
Keyword that indicates immediately relevant information.
Keyword that indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury.
Keyword that indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
Keyword that indicates an imminent hazardous situation, which, if not
avoided, will result in death or serious injury.
E-EQ-HX1OGWW-A
Overview
Environmental Specifications
Specification
Operating Temperature
-13°F to 158°F (-25°C to 70°C) [non-condensing]
Storage Temperature
-40°F to 185°F (-40°C to 85°C) [non-condensing]
Water, Sand Dust
IP 64 per IEC529, section 13.4 and 12.4
Operating Humidity
5 to 95% non-condensing
ESD
+/-4 kV contact, +/-8 kV air
For ENG/CERT Review - Do Not Distribute - Draft 09
Feature
E-EQ-HX1OGWW-A
HX1 User’s Guide
4
Quick Start
Quick Start
This section’s instructions are based on the assumption that your new HX1 is pre-configured and
requires only accessory installation and a battery.
Use this guide as you would any other source book -- reading portions to learn about the HX1,
and then referring to it when you need more information about a particular subject. This guide
takes you through installation and operation of the LXE HX1.
For ENG/CERT Review - Do Not Distribute - Draft 09
In general, the sequence of events is:
HX1 User’s Guide
1.
Install a fully charged battery in the HX1.
2.
Insert HX1 in a belt carry case.
3.
Attach cables (antenna and RS-232) to the HX1 and close case.
4.
Turn the HX1 on.
E-EQ-HX1OGWW-A
Components
Components
Top View
1. Suspend/Resume
Button with Power
LED
For ENG/CERT Review - Do Not Distribute - Draft 09
2. Reset Button
3. Battery Release
Button
4. Battery Pack
Figure 2 HX1 Components
End View
1. Antenna Connector
2. RS-232 Connector, 9 pin
3. RS-232 Connector, 25
pin
Figure 3 HX1 Connectors
E-EQ-HX1OGWW-A
HX1 User’s Guide
6
About Lithium-Ion Batteries
About Lithium-Ion Batteries
For ENG/CERT Review - Do Not Distribute - Draft 09
Li-Ion batteries (like all batteries) gradually lose their capacity over time (in a linear fashion) and
never just stop working. This is important to remember – this mobile device is always ‘on’ even
when in the Suspend state and draws battery power at all times. Always replace the used main
battery with a fully charged main battery.
Figure 4 The HX1 Battery
Install Battery
The battery snaps into place on the RX1. Press the battery into place until a small click is heard as
the battery lip.
Slide the battery toward the battery release button.
Figure 5 Inserting the Battery Pack
HX1 User’s Guide
E-EQ-HX1OGWW-A
About Lithium-Ion Batteries
For ENG/CERT Review - Do Not Distribute - Draft 09
The battery snaps into place when it is properly seated. It may be necessary to press on the end of
the battery to make sure it snaps into place.
Figure 6 Snap the Battery Pack into the HX1
To remove the battery, press the release button and lift the battery from the HX1.
Figure 7 Removing the Battery Pack
E-EQ-HX1OGWW-A
HX1 User’s Guide
8
About Lithium-Ion Batteries
Changing the Battery
Note:
Low battery warnings (if any) are provided by the application running on your HX1.
Please contact your System Administrator with any questions concerning low battery
warnings.
For ENG/CERT Review - Do Not Distribute - Draft 09
To change the HX1 battery:
Note:
1.
Press and release the Suspend/Resume button.
2.
Wait for the Power LED to go out. This occurs in about 1.5 seconds and indicates
the HX1 is in Suspend mode.
3.
Press the battery release button and lift the depleted battery pack from the HX1, as
illustrated in the previous section.
4.
Place the fresh battery in the HX1 and press down firmly until you hear a click, as
illustrated in the previous section.
5.
The HX1 automatically powers On when the battery is inserted.
The HX1 remains in Suspend mode for approximately seven minutes with the battery
pack removed. If a fresh battery pack is not inserted within this time period, the HX1
resets when the battery pack is inserted. If the HX1 resets, you may need to contact your
System Administrator for setup instructions.
Battery Care Procedures
When the HX1 is not in use, do not allow the battery to discharge. Units should be stored with a
fully charged battery. Once a fresh battery is installed, place the HX1 in Suspend mode before
placing it in storage.
During extended storage, it is a good idea to replace the battery in a stored HX1 with a fresh
battery at least once per month.
When changing users on the HX1 it is a good practice to also change the battery pack, even if the
battery pack appears to have plenty of charge remaining.
Lithium battery capacity is directly related to temperature at which the battery is stored and
operated. When possible, keep batteries cool and avoid high temperature areas.
The HX1 battery should be recalibrated once a month in the HX1 Multi-Charger. Please refer to
the “HX1 Multi-Charger User’s Guide” for more information on battery recalibration.
HX1 User’s Guide
E-EQ-HX1OGWW-A
About Lithium-Ion Batteries
The HX1 Multi-Charger
For ENG/CERT Review - Do Not Distribute - Draft 09
The HX1 Multi-Charger had four charger bays. Each charger bay can be used to:
•
Charge an HX1 Battery Pack in less than 3 hours.
•
Recalibrate an HX1 Battery Pack (c1 cycle) an HX1 Battery Pack in about 8 hours
•
Perform a Learn Cycle (c2 cycle) on an HX1 Battery Pack in about 16 hours.
Figure 8 The HX1 Multi-Charger
For information on the HX1 Multi-Charger, please refer to the HX1 MultiCharger User’s guide.
E-EQ-HX1OGWW-A
HX1 User’s Guide
10
Attach Headset
Attach Headset
For ENG/CERT Review - Do Not Distribute - Draft 09
The headset consists of an earpiece, a microphone and an attached cable. The headset attaches to
the lower audio cable which attaches to the HX1.
1.
Quick Disconnect
Connector
2.
25 Pin RS-232
Connector
Figure 9 Lower Audio Cable
Align the 25 pin RS-232 end of the adapter cable with the 25 pin RS-232 port on the HX1. Seat
the connector firmly over the pins and turn the thumbscrews in a clockwise direction. Do not over
tighten.
Note:
If using the HX1 in the belt carrying case, be sure to properly route the cable through the
opening in the end of the carrying case. Please see “Belt Carrying Case” later in this
section for more information.
Figure 10 Headset
The headset assembly has a quick connect end to attach to the quick connect end of the adapter
cable. Align the connectors and push the cable ends together until they lock in place.
Note:
HX1 User’s Guide
The HX1 offers a choice of headsets. The single ear headset with microphone is shown.
E-EQ-HX1OGWW-A
Attach Headset
11
Adjust Microphone and Secure Cable
Do not twist the microphone boom when adjusting the microphone.
The microphone should be adjusted to be about two finger widths from your mouth.
Make sure the microphone is pointed at your mouth (the TALK label is oriented toward your
mouth).
The microphone cable can be routed over or under clothing.
For ENG/CERT Review - Do Not Distribute - Draft 09
Under Clothing
•
Leave the cable exposed only at the top of the collar.
•
Be sure to leave a small loop of cable to allow movement of your head
Over Clothing
E-EQ-HX1OGWW-A
•
Use clothing clips to hold the cable close to your body.
•
Tuck the cable under the belt, but leave a small loop where it goes under the belt.
•
Do not wear the cable on the front of your body. It may get in your way or get
caught on protruding objects.
HX1 User’s Guide
12
Belt Carrying Case
Belt Carrying Case
The HX1 mounts in a belt carrying case. The case consists of two zippered compartments. The
smaller zippered compartment holds the battery end of the HX1.
For ENG/CERT Review - Do Not Distribute - Draft 09
The larger zippered compartment houses the body of the HX1. Extra room is provided for cable
connectors on the end of the HX1 and a slot is provided on the end of the case to allow the cables
to exit the case. Elastic straps are provided to hold the antenna in place.
Figure 11 The Belt Carrying Case
The case also has an adjustable belt, allowing the HX1 to be mounted around the user’s waist.
Installing the HX1 in the case:
HX1 User’s Guide
1.
Place the HX1 in the belt carrying case.
2.
Place the antenna element into the elastic straps provided on the lid portion of the
larger pouch.
3.
Connect all cables to the HX1. Cables attached to the RS-232 ports are routed out of
the case through a cable slot in the end of the carrying case.
4.
Close the compartments. A zipper is provided for each compartment to secure the
HX1.
5.
When the HX1 is installed in the belt carrying case, the battery can be accessed by
unzipping only the small compartment.
E-EQ-HX1OGWW-A
For ENG/CERT Review - Do Not Distribute - Draft 09
Belt Carrying Case
13
Figure 12 HX1 and Antenna in Case
6.
Adjust the straps to fit the user’s waist.
Figure 13 Adjusting the Belt
E-EQ-HX1OGWW-A
HX1 User’s Guide
14
Powering On the HX1
Powering On the HX1
The HX1 automatically powers On when a new battery pack is inserted.
For ENG/CERT Review - Do Not Distribute - Draft 09
The HX1 has three power modes:
•
On – The HX1 is on and all functions are available. The On state is indicated by the
Power LED being lit. The HX1 enters the On state when a battery pack is inserted
or when the Suspend/Resume button is pressed to wake the HX1 from Suspend
mode. When the HX1 enters the On state, the user may hear voice prompts
indicating the device is ready for use.
•
Suspend – The HX1 is using minimum power to maintain system settings. User
input is not accepted in this state. The HX1 is automatically placed into Suspend
when the battery level drops to 5%. A user can place the HX1 in Suspend mode by
pressing and releasing the Suspend/Resume button when the HX1 is On. To exit
Suspend mode, install a fresh battery (if the battery charge is below 5%) or press and
release the Suspend/Resume button (if the battery charge is greater than 5%). The
user does not receive any voice instructions from the HX1 in Suspend.
•
Off – The HX1 enters the Off state when there is no battery power available. When
a fresh battery is installed, the HX1 transitions to the On state. However, the HX1
has reset and it may be necessary to contact your System Administrator for setup
assistance.
Suspend /Resume Button
The Suspend /Resume button can be used to suspend or resume the HX1. It can also be used to
reset the HX1.
Note:
•
When the HX1 is on, pressing and releasing the Suspend / Resume button places the
HX1 in Suspend mode. In approximately 1.5 seconds, the Power LED goes out
indicating the HX1 is in Suspend mode.
•
When the HX1 is in Suspend mode, pressing and releasing the Suspend / Resume
button resumes the HX1.
•
Pressing and holding the Suspend / Resume button for more than eight seconds
resets the HX1.
The HX1 automatically enters the Suspend state when the battery level reaches 5%
power remaining. The HX1 remains in Suspend state until the user installs a fresh
battery pack. If a user does not install a fresh battery pack before the battery pack is
depleted, the HX1 resets when the fresh battery pack is installed.
Power LED
The Power LED is built into the Suspend / Resume switch. The color and behavior of the
POWER LED indicated the status of the HX1:
HX1 User’s Guide
•
Green light, blinking once every three seconds – Indicates the HX1 is receiving a
software upgrade.
•
Green light, blinking once per second – Indicates the HX1 has started the browser.
•
Green light, on solid – The green light remains on solid for approximately 30
seconds after the HX1 has booted. Once the browser has loaded the light blinks
once per second.
E-EQ-HX1OGWW-A
Powering On the HX1
15
•
Red light, blinking rapidly – Indicates an error has occurred during the system
install.
•
No lights – Indicates the HX1 is either in Suspend mode or has no battery power.
•
Alternate Red and Green blinking lights – Indicates the HX1 is out of range.
Resetting the HX1
Consult your System Administrator before resetting the HX1. It may be
necessary for the System Administrator to assist you with setup after resetting the
HX1.
For ENG/CERT Review - Do Not Distribute - Draft 09
Method 1
1.
Remove the battery from the HX1 while it is powered On.
2.
Wait for the power light to go out.
3.
Put the battery back in the HX1. The HX1 automatically resets when the battery is
inserted.
Method 2
1.
Press and hold the Suspend/Resume button for more than eight seconds.
2.
When the Power LED stops flashing and lights solid green, the HX1 has been reset.
Method 3
1.
Press and release the Suspend /Resume button to place the HX1 in Suspend mode.
2.
Wait for the power LED to go out.
3.
Press the Reset button. A cold hardware reset of the unit is performed.
Note:
E-EQ-HX1OGWW-A
Pressing the Reset button while the HX1 is On (not in Suspend mode) can
result in loss of data.
HX1 User’s Guide
16
Entering Data
Entering Data
All data is entered into the HX1 by speaking into the headset’s microphone when prompted. The
HX1 transmits data the voice data to the server automatically.
Please contact your System Administrator if assistance is needed with the voice software installed
on your HX1.
For ENG/CERT Review - Do Not Distribute - Draft 09
If your system is using LXE’s TalkManager software, additional information can be found in the
“TalkManager Reference Guide”.
Getting Help
All LXE manuals are now available on one CD and they can also be viewed/downloaded
from the LXE website. Contact your LXE representative to obtain the LXE Manuals CD.
You can also get help from LXE by calling the telephone numbers listed on the LXE Manuals
CD, in the file titled “Contacting LXE”. This information is also available on the LXE website
www.lxe.com.
Explanations of terms and acronyms used in this guide are located in the file titled “Glossary” on
the LXE Manuals CD.
Manuals and Accessories
Manuals
The following manuals are available on the LXE Manuals CD:
•
TalkManager Reference Guide
•
HX1 Multi-Charger User’s Guide
•
HX1 Reference Guide
•
Contacting LXE
•
LXE Technical Glossary
Accessories
Case and Belt
HX1A401BELTCASE
Case with Belt
HX1 User’s Guide
E-EQ-HX1OGWW-A
Manuals and Accessories
17
HX1A402BELT
Replacement Belt, without Case
Battery and Charger
HX1A377BATTERY
For ENG/CERT Review - Do Not Distribute - Draft 09
Battery, Lithium Ion, HX1
HX1A376CHGR
Charger, 4 bay, HX1
HX1A378CHGRWW
Charger, 4 bay, HX1, No power cord
Cables, Configuration and Training Devices
HX1A051AUDIOCBL
Cable, Lower Audio (HX1 to Headset),
Requires headset
E-EQ-HX1OGWW-A
HX1 User’s Guide
18
Manuals and Accessories
HX1A052CONFIGCBL
For ENG/CERT Review - Do Not Distribute - Draft 09
Cable, Configuration
HX1A053YCABLE
Cable, Splitter for Walkie Talkie, Mono
HX1A054YMICCABLE
Cable, Splitter for Walkie Talkie w/Microphone
HX1A276WKYTKYKIT
Radio, Walkie Talkie Kit
HX1 User’s Guide
E-EQ-HX1OGWW-A
Manuals and Accessories
19
Headsets
HX1A501SNGBHEADSET
For ENG/CERT Review - Do Not Distribute - Draft 09
Single ear, single headband headset with noise
canceling microphone and 5 replacement
windscreens
HX1A502DUALBHEADSET
Single ear, dual headband headset with noise
cancelling microphone and 5 replacement
windscreens
HX1A503BTHHEADSET
Dual ear, behind the head headset with noise
canceling microphone and 5 replacement
windscreens
E-EQ-HX1OGWW-A
HX1 User’s Guide
20
Manuals and Accessories
Headset Parts and Foam
HX1A504AHSBLOCKFOAM
Replacement foam block for dual band headset
For ENG/CERT Review - Do Not Distribute - Draft 09
HX1A505DUALYOKE
Replacement head yoke for dual band headsets
HAX1A506SINGLEYOKE
Replacement head yoke for single band headset
HX1A508WINDSCREEN10
Replacement windscreen for all headset
microphones, 10 pack
HX1A509WINDSCREEN50
Replacement windscreen for all headset
microphones, 50 pack
HX1A510FOAMEAR10
Replacement foam ear piece cover for single and
dual band headsets, 10 pack
HX1A511FOAMEAR50
Replacement foam ear piece cover for single and
dual band headsets, 50 pack
HX1 User’s Guide
E-EQ-HX1OGWW-A
For ENG/CERT Review - Do Not Distribute - Draft 09
Appendix A Regulatory Notices and Safety Information
FCC Information:
This device complies with FCC Rules, part 15. Operation is subject to the following two conditions:
1.
This device may not cause harmful interference
and
2.
This device must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
Warning: Changes or modifications to this device not expressly approved by LXE, Inc., could void the user’s
authority to operate this equipment.
EMC Directive Requirements:
This is a Class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
Industry Canada:
This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment
Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouiller du
Canada. Le present appareil numérique n’emet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numeriques de le Classe A préscrites dans le Reglement sur le brouillage radioélectrique édits par le
ministere des Communications du Canada.
Notice:
The long term characteristics or the possible physiological effects of radio frequency electromagnetic fields have
not been investigated by UL.
This device contains transmitter Module FCC ID: KDZLXE4830P
RF Safety Notice:
Caution:
This portable device with its antenna complies with FCC’s and IC’s RF exposure limits set for an
uncontrolled environment. This equipment has show compliance with FCC’s and IC’s Specific
Absorption Rate (SAR) limits. Highest reported SAR for HX1 is .228W/kg on body. Any
accessories not provided by LXE should not be used with this device. This device must not be colocated or operating in conjunction with any other antenna or transmitter.
E-EQ-HX1OGWW-A
HX1 User’s Guide
22
Regulatory Notices
R&TTE Directive Requirements (Applies only to Equipment operated within the EU/EFTA)
For ENG/CERT Review - Do Not Distribute - Draft 09
Information to User
A label on the exterior of the device should resemble one of the labels shown below (the label contains
the LXE part number of the installed radio card). The labels shown below and affixed to the device,
identify where the device may be used and where its use is restricted. Use of a device is prohibited in
countries not listed below or otherwise identified by the label. (May or may not include the 0560 Notified
Body No.)
Permitted for use in: Austria, Belgium, Denmark, Finland,
Germany, Greece, Iceland, Italy, Ireland, Liechtenstein,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,
Switzerland, and the United Kingdom
Permitted for use in France.
Approvals
Product
HX1
EMI / EMC Standards
EMI / EMC Standards:
FCC Part 15 Subpart B, Class A
EN 55022 : 1998 Class A
EN 55024 : 1998
Safety Standards
EN 60950:2000 3rd Ed.
UL 60950:2000 3rd Ed.
CSA C22.2 No. 60950
IEC60950:1999 3rd Ed.
Transceiver
RF Standards
Notes
6726 (LXE Model No.)
FCC Part 15, Subpart C
Unlicensed Operation
LXE 6700 System 2.4GHz Type II
PCMCIA Card
EN 300 328
Unlicensed Operation
IC-RSS 210
Requires License for Outdoor Use
Transceiver
RF (2.4 GHz) Standards
RF Safety Standards
HX1 with 802.11b/g
FCC Part 15, Subpart C
Industry Canada RSS 201
ETSI 300 328
FCC O.E.T. Bulletin 65
Industry Canada RSS 102
This symbol is placed on the product to remind users to dispose of Waste Electrical and
Electronic Equipment (WEEE) appropriately, per Directive 2002-96-EC. In most areas, this
product can be recycled, reclaimed and re-used when properly discarded. Do not discard labeled
units with trash. For information about proper disposal, contact LXE through your local sales
representative, or visit www.lxe.com.
HX1 User’s Guide
E-EQ-HX1OGWW-A
Regulatory Notices
23
LXE 802.11b/g Transceiver Declaration of Conformity
DECLARATION OF CONFORMITY
according to
the R&TTE Directive;
For ENG/CERT Review - Do Not Distribute - Draft 09
The EMC Directive;
99/5/EEC
89/336/EEC
The Low Voltage Directive;
73/23/EEC
and the Marking Directive;
93/68/EEC
Type of Equipment:
Brand Name or Trademark:
Type Designation:
Manufacturer:
Address:
DSSS 2.4GHz WLAN Radio
LXE
HX1 with 802.11b/g radio
LXE Inc.
125 Technology Parkway
Norcross, GA 30092 USA
The following harmonized European Norms have been applied:
EMC Standards:
EN 301 489-1: 07-2000
EN 301 489-17:07-2000
EN 55022: 1998
Radio Standards:
EN 300 328-1 and -2: 2000-7
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 17: Specific conditions for Wideband data and HIPERLAN equipment
Limits and methods of measurement of radio disturbance characteristics of
information technology equipment
Radio Equipment and Systems (RES);
Wideband transmission systems;
Technical characteristics and test conditions for data transmission equipment
operating in the 2.4 GHz ISM band and using spread spectrum modulation
techniques
The product carries the CE Mark:
We, LXE Inc., declare that the equipment specified above complies with all Essential Health
and Safety Requirements of the above Directives and Standards, as amended.
Date of issue: July 30, 2006
Cyril A. Binnom Jr.
Approvals Engineer
E-EQ-HX1OGWW-A
HX1 User’s Guide
24
Regulatory Notices
LXE Transceiver LXE 6726 Declaration of Conformity
DECLARATION OF CONFORMITY
according to Directives:
1999/5/EC
Radio Equipment and Telecommunications Terminal Equipment
and the mutual recognition of their conformity
93/68/EEC
CE Marking Directive
For ENG/CERT Review - Do Not Distribute - Draft 09
Type of Equipment:
Brand Name or Trademark:
Type Designation:
Manufacturer:
Address:
Year of Manufacturer:
Direct Sequence 2.4 GHz Wireless LAN Card
LXE
LXE 6726
LXE Inc.
125 Technology Parkway
Norcross, GA 30092-2993 USA
2001
The following harmonized European Standards, technical specifications, or other normative
documents have been applied:
EMC:
EN 301 489-1: 07-2000
Electromagnetic compatibility and Radio spectrum Matters
(ERM); ElectroMagnetic Compatibility (EMC) standard for radio
equipment and services; Part 1: Common technical
requirements
EN 301 489-17 07-2000
Electromagnetic compatibility and Radio spectrum Matters
(ERM); ElectroMagnetic Compatibility (EMC) standard for radio
equipment and services; Part 17: Specific conditions for
Wideband data and HIPERLAN equipment
Radio:
EN 300 328-1 and -2: 2000-7
Radio Equipment and Systems (RES);
Wideband transmission systems;
Technical characteristics and test conditions for data
transmission equipment operating in the 2,4 GHz ISM band
and using spread spectrum modulation techniques
Safety:
EN 60950-2: 1992 + A1..A4
Safety of information technology equipment, including electrical
business equipment
We, LXE Inc., declare that the equipment specified above complies with all Essential Health and
Safety Requirements of the above Directives and Standards, as amended.
Place
LXE Inc., Norcross GA USA
Date of issue
24 June 2004
C. Binnom Jr.
RF Approvals Engineer
LXE Inc. 125 Technology Parkway Norcross, GA 30092-2993 USA
ph. 770/447-4224 fax 770/447-6928
HX1 User’s Guide
E-EQ-HX1OGWW-A
Regulatory Notices
25
Annex to DoC for LXE 6726
With regard to the use of external antennas
The LXE 6726 can be equipped with external antennas. The antennas listed have been evaluated with the LXE 6726 pursuant to
ETSI EN 300 328, and therefore meet the definition of ‘dedicated antenna’ per ERC/REC 70-03 Appendix 1 Table 3; thus the
requirement set forth in ERC/REC 70-03 , Annex 3 are met by the LXE model 6726 transceiver.
For ENG/CERT Review - Do Not Distribute - Draft 09
Dedicated Antennas for use with LXE 6726
LXE P/N
Antenna Gain
Radio Power Level
Antenna Description
153180-0001
155522-0001
155814-0001
157368-0001
157399-0001
99004-0027
DAC2450CT1
(Toko P/N)
0 dBi
0 dBi
0 dBi
0 dBi
0 dBi
0 dBi
2.15 dBi
17 dBm
17 dBm
17 dBm
17 dBm
17 dBm
17 dBm
17 dBm
Omni, for LXE VX-series computers
Omni, for LXE MX1-series computers
Patch, for LXE MX1-series computers
Patch, for LXE MX3-series computers
Omni, for LXE MX5-series computers
3 dB Omni, for LXE model 2325 computer
Omni, for LXE MX2-series computers
153179-0001
153325-0001
480424-0400
153599-0001
153600-0001
480424-3404
155846-0001
0 dBi
0 dBi
0 dBi
3 dBi
3 dBi
3 dBi
3 dBi
17 dBm
17 dBm
17 dBm
17 dBm
17 dBm
17 dBm
17 dBm
Omni, Access Point Antenna
Omni, Access Point Antenna
Omni, Access Point Antenna
Omni, Access Point Antenna
Omni, Access Point Antenna
Omni, Access Point Antenna
Spire® Access Point Antenna
155845-0001
155311-0001
480424-3411
480424-3402
481246-2400
480424-1702
6 dBi
6 dBi
6 dBi
6 dBi
6 dBi
6 dBi
13 dBm
13 dBm
13 dBm
13 dBm
13 dBm
13 dBm
Spire® Access Point Antenna
Patch, Access Point Antenna
Patch, Access Point Antenna
Patch, Access Point Antenna
Patch, Access Point Antenna
180° Directional, Access Point Antenna
480424-0411
480429-2703
480429-0411
9 dBi
12 dBi
12 dBi
7 dBm
7 dBm
7 dBm
Omni, Access Point Antenna
90° Directional, Access Point Antenna
Omni, Access Point Antenna
460601-3020
460602-3020
480429-0415
15 dBi
15 dBi
15 dBi
3 dBm
3 dBm
3 dBm
YAGI, Access Point Antenna
YAGI, Access Point Antenna
Omni, Access Point Antenna
C. Binnom Jr.
RF Approvals Engineer
24 June 2004
LXE Inc. 125 Technology Parkway Norcross, GA 30092-2993 USA
ph. 770/447-4224 fax 770/447-6928
E-EQ-HX1OGWW-A
HX1 User’s Guide
26
Regulatory Notices
Lithium Battery Safety Statement
Caution:
Lithium battery inside. Danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent
type recommended by battery manufacturer. (US)
For ENG/CERT Review - Do Not Distribute - Draft 09
Attention:
Contient une pile de lithium. Risque d’explosion dans le cas où la pile ne serait pas correctement remplacée.
Remplacer uniquement avec une pile semblable ou equivalente au type de pile recommandé par le fabricant. (FR)
Forsigtig:
Indeholder lithiumbattterier. Risiko for eksplosion, hvis batteriet udskiftes forkert. Må kun udskiftes med samme
eller tilsvarende type, som anbefalet af fabikanten. (DK)
Varoitus:
Tämä tuote käyttää laservaloa. Skannerissa on jokin seuraavista tarroista. Lue Huomio-kohta. (FI)
Vorsicht:
Enthält Lithium-Batterie. Bei unsachgemäßem Ersatz besteht Explosionsgefahr. Nur durch gleichen oder vom
Hersteller empfohlenen Typ ersetzen. (DE)
Attenzione:
Batteria al litio. Pericolo di esplosione qualora la batteria venga sostituita in maniera scorretta. Sostituire solo con lo
stesso tipo o equivalente consigliato per il fabbricante. (IT)
Atenção:
Contém pilha de lítio. Há perigo de explosão no caso de uma substituição incorreta. Substitua somente pelo mesmo
tipo, ou equivalente, recomendado pelo fabricante. (PT)
Varning:
Innehåller litiumbatteri. Fara för explosion om batteriet är felaktigt placerat eller av fel typ. Använd endast samma
eller motsvarande typ batterier rekommenderade av tillverkaren. (SE)
Advarsel:
Innmontert Lithium batteri. Eksplosjonsfare ved feil montering av batteri. Benytt kun batteri anbefalt av produsent.
(NO)
Cuidado:
Pila de litio adentro. Peligro de explosión si la pila se reemplaza incorrectamente. Reemplace solamente con el
mismo tipo o equivalente recomendado por el fabricante. (ES)
Oppassen:
Bevat Lithium-batterij. Incorrrecte plaatsing van batterij kan leiden tot explosiegevaar. Alleen vervangen door
hetzelfde of door fabrikant aanbevolen gelijkwaardig type. (NL)
HX1 User’s Guide
E-EQ-HX1OGWW-A
Regulatory Notices
Lithium Battery Safety Statement
For ENG/CERT Review - Do Not Distribute - Draft 09
27
(KR)
(GR)
(CN)
(JP)
Dikkat:
(TR)
Legend:
Chinese
Danish
Dutch
English
Finnish
French
German
Greek
E-EQ-HX1OGWW-A
CN
DK
NL
US
FI
FR
DE
GR
Italian
Japanese
Korean
Norwegian
Portuguese
Spanish
Swedish
Turkish
IT
JP
KR
NO
PT
ES
SE
TR
HX1 User’s Guide
Regulatory Notices
For ENG/CERT Review - Do Not Distribute - Draft 09
28
HX1 User’s Guide
E-EQ-HX1OGWW-A
Appendix B End User License Agreements (EULAs)
Voxware VoxBrowser and VoxManager End-User License Agreement
For ENG/CERT Review - Do Not Distribute - Draft 09
By signing below, clicking on an “I Agree” button, or using the Voxware Software, you agree to the following terms:
This End User License Agreement (“EULA” or “Agreement”) is between Voxware, Inc. (“Voxware”), and the company listed
below (“End User”).
Definitions.
For the purposes of this Agreement, the following terms shall have the below agreed upon meanings:
1.
1.1
Documentation. All standard written user information, whether in electronic, print or other format delivered to End
User by Voxware with respect to the Voxware Software, now or in the future, including but not limited to instructions, online
help messages, manuals, training materials, and other publications of Voxware or any licensor of Voxware that contain, describe,
explain or otherwise relate to the Voxware Software.
1.2 Licensed Site(s). Those site(s) at which End User is authorized to utilize the Voxware Software, as set forth in a Partner
Agreement and Schedule A executed between Voxware and Voxware’s Partner.
1.3
Partner Agreement. Partner Agreement means an agreement executed between Voxware and Voxware’s Partner to
promote, market and support Voxware products and services.
1.4
Voxware Software. "Voxware Software" shall mean all computer programs and software components supporting the
development, delivery, and execution of voice recognition solutions, which are provided to End User in object code format under
the terms of this Agreement. None of the Voxware Software is provided in source code formats.
2.
License
2.1 Subject to the provisions of this EULA as well as the payment of all applicable fees for the Voxware products and services
associated with this agreement, Voxware hereby grants to End User, a restricted, personal, non-exclusive, non-transferable, and
non-assignable license to use the Voxware Software (in object code form) and Documentation acquired from Voxware for End
User’s internal use only.
2.2
In no event may the Voxware Software be used other than at the Licensed Site as set forth in a fully executed written
document between Voxware and End User. End User’s use of the Voxware Software is restricted to the number of users for
whose use End User has paid. Any upgrades and releases which may be provided by Voxware under a support agreement or
otherwise will be considered part of the Voxware Software and will be governed by the terms and conditions of this EULA.
2.3 Voxware and its licensors and/or suppliers, as applicable, shall retain all right, title and interest to the Voxware Software,
including all patents, copyrights, trademarks, trade secrets, and other proprietary rights thereto. End User may not make copies
of the Voxware Software, except for one (1) additional copy for archival or backup purposes as long as all copyright and other
notices are reproduced and included on the backup copy. All copies of the Voxware Software are subject to the terms and
conditions of this EULA. End User acknowledges Voxware’s right to use license keys to control access to the Voxware
Software. These keys may be used by Voxware to restrict usage of the Voxware Software if the End User is not in compliance
with this EULA.
2.4
End User will not, nor will End User allow any of its affiliates or any third party to, (i) modify, reverse compile,
decompile, reverse engineer, port, translate, localize, or create derivative works of all or any part of the Voxware Software; (ii)
distribute, sell, lend, rent, transfer, convey, modify, decompile, disassemble, reverse engineer or attempt to reconstruct, identify,
update or discover any source code, underlying user interface techniques or algorithms of the Voxware Software by any means
whatsoever, for any purpose whatsoever, (iii) grant any sublicense, leases or other rights in the Voxware Software to any third
party; or (iv) take any action that would cause the Voxware Software to be placed in the public domain. The copyright legends
and other proprietary legends shall not be removed from the Voxware Software.
2.5
Neither this EULA, nor any right, license or obligation hereunder, may be transferred, assigned, delegated,
sublicensed, relocated or moved to another place, in whole or in part without the prior written consent of Voxware.
2.6
Voxware Software is protected by trade secret and/or copyright law and is proprietary to Voxware. The placement of a
copyright notice on any portion of the Voxware Software does not mean that such portion has been published and will not
derogate any claim of trade secret protection for the same. Title to all complete or partial copies, together with all applicable
E-EQ-HX1OGWW-A
HX1 User’s Guide
30
End User License Agreements
rights to copyrights, patents, trade secrets and other rights in Voxware Software, are and shall remain the property of Voxware.
2.7
End User shall be provided with one (1) copy of user Documentation describing the use and operation of the Voxware
Software. The Documentation shall be supplied in magnetic form and may be reproduced by the End User solely for End User’s
employees pursuant to the terms of this EULA and solely for the purposes authorized herein.
For ENG/CERT Review - Do Not Distribute - Draft 09
2.8 End User agrees that all output of End User’s use of the Voxware Software, including, but not limited to graphic files and
computer files will be used solely in connection with End User’s use of the Voxware Software. Voxware grants End User a
license to modify such Voxware Software subject to the following: (i) all modifications and enhancements to the Voxware
Software (“Modified Software”) shall be owned by Voxware and shall be considered part of the Voxware Software and subject
to the restrictions for Voxware Software set forth hereunder; and (ii) End User’s right to use the Modified Software shall be
limited by the license for the unmodified Voxware Software acquired by End User, e.g., a site license for a particular site or a
license limited to a certain number of terminals. End User hereby assigns all of its rights, if any, in the Modified Software to
Voxware, and will sign all forms Voxware deems appropriate.
Term and Termination
3.1
This EULA shall continue for as long as End User uses the Voxware Software or until terminated. If End User fails to
comply with any of the terms of this EULA, Voxware may immediately terminate this Agreement. Upon any termination, End
User will destroy all copies of the Voxware Software and Documentation or, if requested by Voxware, return all copies of the
Voxware Software and Documentation to Voxware and have an authorized representative provide written certification verifying
the return or destruction of the Voxware Software.
3.
3.2
Any unauthorized use, copying, disclosure, distribution, or sub-licensing of Voxware Software or Documentation will
be deemed an incurable, material breach of this EULA and cause for termination.
3.3
All provisions of this EULA relating to disclaimers of warranties, limitation of liability, remedies, damages and either
party’s Confidential Information or proprietary rights shall survive the cancellation, expiration, or termination of this EULA.
3.4
End User agrees that any breach of the provisions regarding licensing, ownership or Confidential Information in this
Agreement shall cause Voxware irreparable harm and Voxware may obtain injunctive relief without the requirements to post a
bond as well as seek all other remedies available to Voxware in law and in equity in the event of breach or threatened breach of
such provisions.
Products, Services and Support
4.1
Voxware shall provide services and support as mutually agreed upon by Voxware and End User and as more
specifically set forth in the applicable Schedules. End User agrees to pay Voxware the fees for all products, support and services
ordered at the prices set forth in the above subject contract document(s).
4.
5.
5.1
Confidential Information
All of the Voxware Software, Documentation and other materials are Voxware’s Confidential Information.
5.2
In the event that the parties have signed a Mutual Non-Disclosure Agreement, then the terms of that agreement are
incorporated by reference as if fully set forth herein. Otherwise, the remaining provisions of this Section 5 shall control.
5.3
“Confidential Information” includes any information disclosed by either party (“disclosing party”) to the other party
(“recipient”), either directly or indirectly, in writing, orally or by inspection, including without limitation the Voxware Software,
processes, documents, prototypes, samples, software, schematics, flowcharts, graphical layouts and descriptions, plant and
equipment. Confidential Information may also include information disclosed to a disclosing party by third parties. Confidential
Information shall not, however, include any information which (i) was publicly known and made generally available to the
general public or in the public domain prior to the time of disclosure by the disclosing party; (ii) becomes publicly known and
made generally available after disclosure by the disclosing party to the receiving party through no action or inaction of the
receiving party; (iii) is already in the possession of the receiving party at the time of disclosure by the disclosing party as shown
by the receiving party’s files and records immediately prior to the time of disclosure; (iv) is obtained by the receiving party from
a third party without a breach of such third party’s obligations of confidentiality; or (v) is independently developed by the
receiving party without use of or reference to the disclosing party’s Confidential Information, as shown by documents and other
competent evidence in the receiving party’s possession.
5.4
Should any such Confidential Information of a disclosing party in the possession of a recipient be required by law to be
disclosed, the receiving party shall give the disclosing party prompt written notice of such requirement prior to such disclosure
and assistance in obtaining an order protecting the information from public disclosure or limiting the effect of the disclosure.
5.5
With respect to the Confidential Information, and except as expressly authorized herein, End User hereby agrees that it
shall not use, commercialize or disclose the Confidential Information to any person or entity, except to its own employees having
a "need to know”. Such employees of the End User are to be advised by the End User of the confidential and proprietary nature
of the Voxware Software, Documentation, and all materials and information related thereto, and agree to be bound by such
restrictions.
HX1 User’s Guide
E-EQ-HX1OGWW-A
End User License Agreements
31
5.6
In the event that the End User retains or engages contractors, consultants, or other third parties unrelated to End User
(“Third Parties”), and the End User wishes to disclose Confidential Information to those Third Parties, then the End User agrees
that such Third Parties shall execute appropriate confidentiality agreements and that any such confidentiality agreement between
the End User and such Third Party shall contain language that requires the Third Party to observe the End User's policies
regarding confidentiality and nondisclosure of proprietary information, which policies shall be no less restrictive than the terms
contained herein.
For ENG/CERT Review - Do Not Distribute - Draft 09
5.7
End User and its personnel shall use at least the same degree of care in safeguarding the Confidential Information as
the End User uses in safeguarding its own Confidential Information, but in any event no less than a reasonable standard of care.
Upon termination of this EULA, the End User shall return or destroy all Confidential Information in its possession or control and
cease all further use thereof.
5.8
End User agrees that any breach of the provisions regarding ownership or Confidential Information contained in this
agreement shall cause Voxware irreparable harm and Voxware may obtain injunctive relief without the requirements to post a
bond as well as seek all other remedies available to Voxware in law and in equity in the event of breach or threatened breach of
such provisions.
Disclaimer of Warranties and Limitation of Liability
6.1
EXCEPT AS SPECIFICALLY SET FORTH IN THIS EULA, VOXWARE HEREBY DISCLAIMS ALL EXPRESS
AND IMPLIED WARRANTIES, RELATING TO THE VOXWARE SOFTWARE, AND ALL MODIFICATIONS OR
UPGRADES THERETO, REGARDLESS OF FORM, AND RELATED DOCUMENTATION, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY, TITLE, NON-INFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE,
FITNESS OF RESULTING WORK PRODUCT, OR THAT PRODUCTS OR SERVICES, INCLUDING ANY VOXWARE
SOFTWARE WILL GENERATE CERTAIN RESULTS, OR THOSE ARISING BY LAW, STATUTE, USAGE OF TRADE,
OR COURSE OF DEALING.
6.
6.1
VOXWARE SHALL NOT BE LIABLE TO END USER OR TO ANY OTHER ENTITY OR PERSON, IN
CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, FOR ANY FINES, LOSS OF REVENUE OR
PROFITS, COMMERCIAL OR ECONOMIC LOSS, OR ANY OTHER SPECIAL, EXEMPLARY, INDIRECT, INCIDENTAL
OR CONSEQUENTIAL DAMAGES, FOR CLAIMS, LOSSES OR DAMAGES ARISING OUT OF THIS EULA, VOXWARE
SOFTWARE, THIRD PARTY SOFTWARE, DOCUMENTATION, EQUIPMENT, TECHNICAL INFORMATION,
SUPPORT, SERVICES OR OTHER ITEMS PROVIDED TO OR AS A RESULT OF THE USE OR INABILITY TO USE
ANY OF THE ABOVEMENTIONED EVEN IF VOXWARE OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OR INABILITY TO USE
THE VOXWARE SOFTWARE OR DOCUMENTATION (OR ANY HARDWARE FURNISHED WITH THE VOXWARE
SOFTWARE). IN NO EVENT WILL THE TOTAL LIABILITY OF VOXWARE FOR ANY CLAIM UNDER THIS EULA
EXCEED THE FEE(S) OR PRICE(S) PAID IN THE LAST 12 MONTHS BY END USER FOR THE APPLICABLE
VOXWARE SOFTWARE OR OTHER ITEM OR SERVICE ON WHICH THE CLAIM IS BASED REGARDLESS OF
WHETHER ANY REMEDY SET FORTH HEREIN FAILS OF ITS ESSENTIAL PURPOSE OR OTHERWISE.
Infringement
7.1
Voxware shall indemnify, defend and hold End User harmless from and against any claim that the Voxware Software
as delivered by Voxware to End User, when used as documented by Voxware, infringes the U.S. copyright, patent, trademark or
trade secret rights of any third party provided that End User provides prompt written notice of such claim, provides reasonable
assistance to Voxware in the defense of such claim, and grants Voxware the sole control over the defense or settlement of such
claim.
7.
7.2
If any Voxware Software becomes or, in Voxware’s opinion is likely to become the subject of an infringement claim or
action, Voxware may, at its option: (a) modify the allegedly infringing Voxware Software to avoid the infringement, (b)
substitute other equally suitable Voxware Software, (c) procure, at no cost to End User, the right for End User to continue to use
the Voxware Software free of the restrictions allegedly caused by the infringement, or (d) terminate the license rights for such
Voxware Software and refund to End User the license fee paid on a prorated basis for such Voxware Software for which
Voxware has terminated the license rights but only to the extent such termination occurs within five (5) years from the date the
Voxware Software was licensed by End User.
7.3
The foregoing Section 7 states Voxware’s sole obligation and End User’s exclusive remedy in the event of any such
claim or action. In case of doubt, this infringement warranty does not apply to custom programs or to technical information.
8.
Export Controls
8.1
End User undertakes not to export the Voxware Software or technical data, which it receives from Voxware, or any
product directly resulting from such technical data, unless this is permitted under all applicable laws and provisions, in particular
of the United States, and all necessary approvals (both United States and foreign government approval) have been duly obtained.
E-EQ-HX1OGWW-A
HX1 User’s Guide
32
9.
End User License Agreements
Choice of Law
9.1
This EULA and its performance shall be governed by, construed, and interpreted by the laws of the State
of New Jersey without regard to conflicts of law principles of any jurisdiction. The U.N. Convention on Contracts
for the International Sale of Goods shall not apply to this Agreement.
10. General
10.1
Severability. If any provision of this EULA shall be determined to be void, invalid, unenforceable or illegal for any
reason, the validity and enforceability of all of the remaining provisions shall be enforced to the maximum extent possible to
effectuate the original express intent of the parties.
For ENG/CERT Review - Do Not Distribute - Draft 09
10.2 Limitation on Actions. End User may bring no action arising out of this Agreement, regardless of form, more than one (1)
year after the cause of action has arisen.
10.3
Authorization. The person executing this EULA on behalf of End User represents that he/she is authorized to sign this
EULA on behalf of End User and warrants that he/she has the full power to enter into this Agreement on behalf of End User.
10.4
No waiver of breach of failure to exercise any option, right or privilege under the terms of this EULA by either party
on any occasion shall be construed to be a waiver of the same or any other option, right or privilege on any other occasion.
10.5
If pricing to End User is based upon a metric such as licenses per End User or applications used by End User, End User
agrees to maintain (and to allow Voxware to audit and inspect) records of the number and location of the licenses to the Voxware
Software that have been reported and fully paid for by End User. This right to audit requires one week prior notice to End User.
Voxware and its accountants or auditors shall have full access to the system records of End User pertaining to activities under
this EULA and shall have the right to make copies therefrom at Voxware's expense. Voxware, its accountants or auditors shall
have such access at all reasonable times and from time to time during normal business hours during the term of this EULA and
for a period of three (3) years after its expiration or termination, as the case may be. If the audit turns up more than a 5%
discrepancy in favor of Voxware, the End User shall pay all of Voxware’s reasonable costs for such audit along with past due
fees for the licenses and interest.
11. Entire Agreement
11.1 This EULA, and all Schedules and exhibits thereto, constitutes the complete and entire agreement between the parties with
respect to the subject matter contained herein, superseding all previous agreements pertaining to such subject matter, and may be
modified only by an amendment executed in writing by the authorized representatives of both parties hereto. The terms and
conditions of this EULA shall prevail notwithstanding any variance with the terms and conditions of any purchase order or other
documentation submitted by End User with respect to the Voxware Software, support, or any related products or services
provided. In the event that the terms of this EULA conflict with those of any other agreement or document, then the terms of this
EULA shall control.
11.2
Both parties hereto represent that they have read this Agreement, understand it, and agree to be bound by all its terms.
Whereof, Voxware and End User have executed this EULA by their duly authorized representatives as of the Effective Date.
Effective Date
End User
Voxware
Type
Type
Signature
Signature
Name
Name
Voxware, Inc.
Delaware corporation
Title
Title
Address
Address
168 Franklin Corner Road, Building 1,
Suite 3
City
City
Lawrenceville
State/Prov.
State/Prov.
New Jersey
Zip/Postal
Zip/Postal
08648
Country
Country
U.S.A.
HX1 User’s Guide
E-EQ-HX1OGWW-A
End User License Agreements
33
LXE Equipment Software License Agreement
Your rights as Licensee to use the Licensed Software are described in and limited by this LXE Equipment Software License
Agreement between LXE and Licensee (the "License").
For ENG/CERT Review - Do Not Distribute - Draft 09
1. The License. LXE hereby grants to Licensee, and Licensee hereby accepts, a non-exclusive license to use the Licensed Software
up to the number of users identified on the applicable LXE sales order acknowledgment, subject to all the terms and conditions of
this License.
2. Term: Termination. The License shall become effective upon delivery of the Licensed Software to Licensee and shall continue
for as long as the Licensee continues to use the Licensed Software unless the License is sooner terminated as provided herein.
Except where the License has been assigned to a third party fully in accordance with the provisions of Section 3 of this License, if
Licensee ceases to use the Licensed Software, or if Licensee breaches any of the material provisions of this License, LXE shall have
the right to terminate the License by giving notice of termination to Licensee, in which case the License shall terminate immediately
upon LXE giving such notice to Licensee. Upon termination of the License, all rights granted to Licensee under this License will
terminate and revert to LXE, and Licensee shall return to LXE the Licensed Software, all copies of the Licensed Software (whether
modified or unmodified), or destroy such copies and materials, in each case to the extent possible without damaging the Equipment.
3. Restrictions. Firmware and Controlware may be used only on or as part of the Equipment, and Licensee shall not be authorized
to use Firmware or Controlware on or as part of any other equipment. Licensee shall not assign, sublicense, transfer, pledge, lease,
rent or share Licensee's rights granted under this License without the express prior written consent of LXE, which consent may be
withheld for any reason; provided, however, if the Licensed Software is imbedded in Firmware in any Equipment intended to be
resold by Licensee to a third party, such Licensed Software may be assigned or transferred upon the assignment or transfer of such
Equipment if, and only if, the third party agrees in writing acceptable to LXE to assume and comply with any and all of the terms and
conditions of this License. Except as authorized under this Section, no copies of the Licensed Software or portions thereof may be
made by Licensee or any person under Licensee's authority or control. Licensee may make one copy of the Licensed Software for
backup purposes. Any such copies of Licensed Software shall include LXE's copyright and other proprietary notices. Licensee may
not modify the Licensed Software, or any copy, adaptation, transcription, or merged portion thereof, except as expressly authorized
by LXE. Licensee may not use the Licensed Software in any country where applicable law requires the Licensed Software or this
License to be in a language other than English. Licensee may not modify, translate, reverse engineer, decompile, disassemble
(except to the extent applicable laws specifically prohibit such restriction), or create derivative works based on the Licensed
Software.
4. Ownership. Licensee acknowledges and agrees that the Firmware, Controlware and Programs consist of proprietary, unpublished
works of LXE or its licensors, protected under U.S. copyright law and trade secret laws of general applicability. Licensee further
acknowledges and agrees that all rights, title, and interest in and to the Licensed Software are and shall remain with LXE. This
License does not convey to Licensee any interest in or to the Licensed Software, but only a limited right of use that shall terminate as
provided in Section 2 of this License. Licensee shall keep the Licensed Software free and clear of all claims, liens and
encumbrances.
5. Warranties. LXE warrants for a period commencing upon the Warranty Start Date and continuing for one year thereafter (the
“Warranty Period”) that, except as indicated on a LXE sales order acknowledgment form as warranted by the original manufacturer,
the media upon which all Licensed Software resides shall be free from defects in materials and workmanship and further that the
Licensed Software shall perform substantially in accordance with the LXE provided specifications in the applicable documentation.
LXE’s obligation to perform pursuant to the warranties provided in this Section is limited to undertaking reasonable efforts to
identify and correct any such defects and nonconformities with the specifications in any warranted Licensed Software returned to
LXE’s designated service location within the Warranty Period. In the event LXE is unable to cure or correct such nonconformity,
Licensee’s sole remedy shall be, as applicable, (i) to receive a refund of the purchase price paid for the Equipment using the
nonconforming Firmware or Controlware or (ii) to receive a refund of the license fee paid for the nonconforming Program. However,
LXE shall not be obligated to correct, cure or otherwise remedy any nonconformity if Licensee has made any changes whatsoever to
the non-conforming Licensed Software, or if such Licensed Software has been misused or damaged in any respect, or if Licensee has
not reported to LXE the existence and nature of such nonconformity promptly upon discovery thereof.
For Licensed Software identified on an LXE sales order acknowledgment form as warranted by the Original Manufacturer, such
original manufacturer’s warranty applies solely.
LXE has no obligation under the warranties provided in this Section to correct any Licensed Software programming error(s)
which do not significantly affect the use of the Licensed Software, however, such programming error corrections shall be made
available from time to time to those Licensees electing applicable LXE’s RF Care Maintenance Services. EXCEPT FOR THE
LIMITED WARRANTY SET FORTH IN THIS SECTION, LXE DISCLAIMS ANY AND ALL OTHER PROMISES,
REPRESENTATIONS, AND WARRANTIES WITH RESPECT TO THE LICENSED SOFTWARE, WHETHER EXPRESS
OR IMPLIED, INCLUDING WITHOUT LIMITATION, IMPLIED WARANTIES OF MERCHANTABILITY AND FITNESS
E-EQ-HX1OGWW-A
HX1 User’s Guide
34
End User License Agreements
FOR A PARTICULAR PURPOSE.
For ENG/CERT Review - Do Not Distribute - Draft 09
6. Remedies. Licensee acknowledges and agrees that, in the event of Licensee’s breach of any of the provisions of this
License, LXE will suffer irreparable injury and will not have an adequate remedy in money damages. LXE shall therefore be
entitled to obtain an injunction against such breach from any court or tribunal of competent jurisdiction immediately upon
request. LXE’s right to obtain injunctive relief shall not limit its right to seek further remedies under Section 3, any other
provisions of this License, or otherwise.
IN NO EVENT SHALL LXE BE LIABLE FOR ANY LOSS OF PROFITS, ANY INCIDENTAL, SPECIAL, EXEMPLARY,
PUNITIVE OR CONSEQENTIAL DAMAGES EVEN IF LXE HAS BEEN ADVISED OF THE POSSIBIILITY OF SUCH
DAMAGES. IN NO EVENT SHALL LXE’S LIABILITY FOR ANY REASON AND UPON ANY CAUSE OF ACTION
WHATSOEVER EXCEED THE LICENSE FEE OR THE PURCHASE PRICE FOR THE LXE EQUIPMENT USING THE
LICENSED SOFTWARE, AS APPLICABLE. This limitation upon damages and claims is intended to apply without regard to
which provisions of this License have been breached or have proven ineffective.
7. U.S. Government Restricted Rights. Licensed Software which is the subject matter of this License are commercial
computer software programs developed at private expense. It is understood and agreed that if LXE permits Licensee to
sublicense the Licensed Software to the U.S. Government (the “Government”), then the use, duplication or disclosure by the
Government is subject to restrictions set forth in FAR Sections 52.227-14, 52-227-19 and 52.227-7013, as applicable, and any
amendment or supplement thereto. Any documentation provided with the Licensed Software shall be provided to the
Government by Licensee.
8. Miscellaneous. This License shall be governed by and construed in accordance with the laws of Georgia without regard to
conflicts of law. The sole jurisdiction and venue for any litigation arising out of this Licensee shall be an appropriate federal or
state court located in Georgia. The waiver or failure of either party to exercise any right in any respect provided for herein shall
not be deemed a waiver of any further right hereunder. No modification of this License shall be binding unless it is in writing
and is signed by an authorized representative of the party against whom enforcement of the modification is sought. Any notices
required or permitted under this License shall be in writing and delivered in person or sent by registered or certified mail, return
receipt requested, with proper postage affixed. Neither party shall be liable to the other for any delay or failure to perform for
causes beyond its reasonable control. Performance time shall be considered extended for a period of time equivalent to the time
lost because of any such delay. In the event any of the terms of this License are held to be invalid or void by any court or
tribunal of competent jurisdiction, such term or terms shall be enforced to the maximum extent possible so as to give effect to the
intent of the parties and all the remaining terms of this License shall remain in full force and effect.
HX1 User’s Guide
E-EQ-HX1OGWW-A
For ENG/CERT Review - Do Not Distribute - Draft 09
Index
25 pin RS-232 connector ...........................................5
Getting Started...........................................................4
9 pin RS-232 connector .............................................5
Headset, Install ........................................................10
Antenna
Connector..............................................................5
Audio Cable
Install ..................................................................10
IEC IP 64 ...................................................................3
Battery Pack...............................................................6
Care.......................................................................8
Change ..................................................................8
Charger..................................................................9
Install ....................................................................6
Recalibrate ............................................................8
Belt Carrying Case ..................................................12
Install ..................................................................12
Components...............................................................5
Connector
25 pin RS-232 .......................................................5
9 pin RS-232 .........................................................5
Antenna.................................................................5
CPU ...........................................................................1
LED, Power ...............................................................5
Li-Ion battery life ......................................................6
Manuals ...................................................................16
Microphone adjustment ...........................................11
Multi-Charger ............................................................9
Operating Temperature..............................................3
Power LED ................................................................5
Power Modes ...........................................................14
Power On.................................................................14
Quick Start Instructions.............................................4
Document Conventions .............................................2
Environmental Specifications....................................3
E-EQ-HX1OGWW-A
Reset ........................................................................15
Reset Button ..............................................................5
HX1 User’s Guide
36
Index
Environmental.......................................................3
Suspend Resume Button..........................................14
Suspend/Resume button ............................................5
For ENG/CERT Review - Do Not Distribute - Draft 09
Specifications
HX1 User’s Guide
E-EQ-HX1OGWW-A

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2006:08:17 13:42:15-04:00
Creator Tool                    : Acrobat PDFMaker 7.0.7 for Word
Modify Date                     : 2006:08:17 13:44:53-04:00
Metadata Date                   : 2006:08:17 13:44:53-04:00
Format                          : application/pdf
Title                           : E-EQ-HX1OGWW-A
Creator                         : mrs3837
Description                     : HX1 User's Guide
Document ID                     : uuid:71e8ca55-56a7-4817-b46b-26f1fbe75bb7
Instance ID                     : uuid:6e867537-6492-4268-a791-03f84832feb2
Company                         : EMS Technologies, Inc.
Has XFA                         : No
Page Count                      : 40
Page Layout                     : OneColumn
Subject                         : HX1 User's Guide
Author                          : mrs3837

EXIF Metadata provided by EXIF.tools