Honeywell ZIG100ND Zigbee Module ZIG100ND User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1012755
Application ID	U58Icqkahe0xgATq7Ofxcg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.74kB (34296 bits)
Date Submitted	2008-10-08 00:00:00
Date Available	2008-10-08 00:00:00
Creation Date	2008-09-12 04:40:34
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2008-09-14 23:10:39
Document Title	User manual

METROLOGIC INSTRUMENTS, INC.
Zigbee Module with Mesh Network
Model No.: ZIG100ND
FCC ID:LW5ZIG100ND
IC:3114A-ZIG100ND
Communication User Guide
Feb 29, 2008.
Copyright@ 2008 Metrologic Instruments, Inc.
All rights reserved.
1. Introduction
This document describes how to communicate with Metrologic ZigBee kits
which have been designed to provide a low cost, low power IEEE802.15.4
wireless mesh networking solution.
2. Command conventions
To simplify the communication with Metrologic ZigBee kit, a Reg-style set is
used.
Each command with 80 bytes size must be preceded by the  prefix, then
CMD_TY and Form Data, the end by  suffix. Any command not following
this pattern is either not accepted by the module or will cause a timeout in
response.
3. Register Map
Registers List and Default Values
RO = read-only; R/W = programmable; - = undefined
Address
Description
Data Access
Default
(hex)
Firmware Version Major
RO
0x00
Firmware Version Minor
RO
0x00
Hardware Version Major
RO
0x00
Hardware Version Minor
RO
0x00
Power Level
0x00 – Low
0x01 – Middle
0x00
Class ID Major
RW
0x00
Class ID Minor
RW
0x00
Operating Mode
0x00 – Short Sleep Mode
0x01 – Long Sleep Mode
RW
0x00
Property
Bit 0:Background
0 – Black
1 – Gray
Bit1~3:Color Bit Count
000 – 1 bit
001 – 8 bits
010 – 16 bits
100 – 24 bits
9 ~ 40
41~63
64 ~ 255
0x00
0x00
Reserved
0x00
0x00
Integrators Responsibility
1) The Zigbee Module has a limited module approval and should not be changed
without recertification.
2) The MPE calculations need to be checked based on the location of the unit with
reference to the user. See applicable FCC/IC guidelines governing MPE and SAR
testing.
3) The end product needs to included “ This product contains FCC ID
LW5ZIG100ND/ IC:3114A-ZIG100ND
4) All applicable FCC/IC warnings need to be in the end users manual.
FCC & IC RF Radiation Exposure Statement for both module and OEM integrator:
1. This Transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
2. This equipment complies with FCC & IC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.
IC statements:
Operation is subject to the following two conditions: (1) this devicemay not cause
interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2008:09:12 04:40:34Z
Modify Date                     : 2008:09:14 23:10:39-03:00
Page Count                      : 5
Creation Date                   : 2008:09:12 04:40:34Z
Mod Date                        : 2008:09:14 23:10:39-03:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Metadata Date                   : 2008:09:14 23:10:39-03:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools