Hoover H2510 User Manual CORDLESS POWER MOP Manuals And Guides L0804035
HOOVER Carpet/Floor Sweepers Manual L0804035 HOOVER Carpet/Floor Sweepers Owner's Manual, HOOVER Carpet/Floor Sweepers installation guides
User Manual: Hoover H2510 H2510 HOOVER CORDLESS POWER MOP - Manuals and Guides View the owners manual for your HOOVER CORDLESS POWER MOP #H2510. Home:Vacuums & Floor Care Parts:Hoover Parts:Hoover CORDLESS POWER MOP Manual
Open the PDF directly: View PDF
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
HOOVER Owner's Impulse" Cordless Power Mop Manual English -) pp. 1-12 EspaSol -_ pag 13-19 Frangais -_ p 20-26 This cleaner was inspected and packaged carefully before being shipped from the factory, If you should happen to need assistance during assembly or operation: Visit us online at hoover.corn to find the service outlet nearest you (click on the "Service" button) or Call 1-800-944-9200 for an automated referral of authorized service outlet locations (US only) or Call 1-330-499-9499 to speak with a representative Consumer Response Center PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE. _.. Review this manual operating hoover.com before cleaner. in our Whe! Fill in and retain The model and serial number are located on the back of the cleaner. For your personal records, please enter the COMPLETE mode/and serial number in the spaces provided and retain this information. Your cleaner is model and has serial number It is suggested that you attach your sales receipt to this owner's manual. Verification of date of purchase may be required for warranty service of your Hoover product. including the following: READ ALL INSTRUCTIONS • • • • • • • • • Unpacking ....................................... 3 Cleaner descriptions ...................... 4 How to use ................................... 4-8 Automatic shut-off ..................... 6 Clean solution tank ................. 5-6 • Important Safeguards .................... 2 Maintenance .............................. 8-10 Cleaning the brushes ................. 9 Cleaning the nozzle .................... 9 Warranty ........................................ 12 Parts & accessories mail order form ............................................... 27 • • • • • • • • • • • • • • • • • • © 2006 The Hoover Company hoover.corn Use indoors only. Use only on surfaces moistened by the cleaning process or small spills. Do not immerse product. For use on bare floors or sealed wood floors. Do not use on carpets. Always install float before any wet pick up operation. Close supervision is necessary when any appliance is used by or near children. Do not allow cleaner to be used as a toy or to run unattended at any time. Keep hair, loose clothing, fingers, feet and all parts of body away from openings and all moving parts. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes. Do not pick up or use flammable or combustible materials such as gasoline or fine wood sandings or use in areas where present. Avoid picking up hard, sharp objects with the cleaner. They may damage the cleaner. Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, or anything that may reduce air flow. Do not use charger with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a Hoover Sales & Service Center or Authorized Hoover Waranty Service Dealer. Do not clean over floor electrical outlets. Do not use without filter and tanks in place. Keep detergents and other cleaners out of children's reach. Do not pick up chlorine bleach, pine based cleaners, drain cleaner, or any other toxic material with this appliance. When using recommended chemicals with this machine, be certain area is well ventilated. Follow manufacturer's instructions for all chemicals used with this machine. Do not exceed recommended mixing ratios. Store in a dry place. Do not expose machine to freezing temperatures. Use cleaner only for its intended use as described in the instructions. Use only manufacturer's recommended attachments. Do not incinerate this appliance even if it is severely damaged. The battery can explode in a fire. Do not unplug by pulling on charger cord. To unplug, grasp the charger, not the cord. Never handle plug or charger with wet hands. Use only the charger supplied by the manufacturer to recharge this appliance. Charge indoors only. Turn appliance off before recharging. Use extra care when cleaning on stairs. Do not pull or carry by charger cord. Do not use charger cord as a handle, close door on charger cord, or pull charger cord around sharp edges or corners. Do not run appliance over charger cord. Keep charger cord away from heated surfaces. Unplug charger from outlet when not in use. Unplug appliance from charger before servicing. WARN | N G: Thisproduct conta,ns chem,ca,s known to the State of California WASH HANDS AFTER LISTED BEFORE USING THIS APPLIANCE To reduce the risk of fire, electric shock, or injury: Index Cleaning sealed wood floors .7-8 Picking up spills ......................... 8 If You Have a Problem ................. 11 Service ....................................... 11 parerdonSs,=_ WARNING: • Recovery tank ...................................6-7 Storage ...................................... 10 How to clean ................................ 7-9 To clean floor .............................. 7 usming_ngcrictalapgantce,SwPysffole_u Save to cause cancer HANDLING. these and reproductive toxicity. instructions! FOR HOUSEHOLD USE ONLY. Questions or Concerns? Hoover wants to quickly resolve any concerns about your cleaner or questions regarding its use, Look on the list provided with the product for your local Hoover Sales & Service Center or in the Yellow Pages under "Vacuum Cleaners - Household" for the nearest Authorized Hoover Warranty Service Dealer (Depot) or call: Visit us online at hoover.corn to find the service outlet nearest you (click on the "Service" button) OR Call 1-800-944-9200 for an automated referral of authorized service outlet locations (U,S, only) OR Call 1-330-499-9499 to speak with a representative in the Hoover Consumer Response Center, ma NOTE: Be sure to charge your Cordless Power Mop 16 hours before initial use. B The battery may lose charge during shipping, Make sure the switch is in the OFF position before charging, A This cleaner is intended for household use. Carton contents A. Cordless power mop B. Charger C. Floor-to-Floor TM hard floor cleaning detergent D. Storage tray ConHnued _ 3 1. Hand grip 2. Solution trigger 3. Mode selector switch - choose SCRUB, OFF or PICK UP 4. Mode indicator 5. Handle 6. Handle release button - use to fold handle for storage 7. Battery indicator light 8. Clean solution tank cap/ measuring cup 9. Clean solution tank release 10. Clean solution tank 11. Recovery tank lid and filter 12. Recovery tank release 13. Recovery tank - collects dirty cleaning solution 14. Nozzle release buttons - release nozzle for easy clean-up 15. Nozzle 16. Squeegee - located underneath nozzle 15 17. 18. 19. 20. 21. 19 Battery compartment Battery charger receptacle Soft tread wheels Battery charger Storage tray This cleaner is intended for household use. Charging I<51 Charge battery for 16 hours before initial use. If performance drops to an unacceptable level during cleaning, refer to "Troubleshooting" section, NOTE: • It is warm Never above With switch in OFF position, plug charger (A) into 110/120 volt electrical outlet, Firmly press charger end into cleaner receptacle (B), located on the back of the cleaner, Press firmly on cleaner to ensure that end of cord is fully connected. Your cleaner will begin charging, It is designed to be stored on charge and ready for use at all times, 4 Unfold handle C normal for the charger to feel when the battery is charging, charge battery in temperatures 100 ° F or below 32 ° F, • Charging light illuminates cleaner is charging, When at full charge, the charging illuminate green, • The cleaner can be on a red when battery is light will constant charge so it is always ready for use, Make sure it is in OFF position before charging. However, if the cleaner will not be used for several weeks at a time, unplugging it is recommended, Do not use an outlet which is controlled with a wall switch for charging your cleaner. Press on button (C) to raise handle (D) to upright position until it locks in place, How to fold handle Before you begin cleaning c Vacuum floor thoroughly. Do not use the Impulse TM Cordless Power Mop as a dry pick up vacuum cleaner. Your HOOVER Impulse TM Cordless Power Mop can be used to wet clean non-carpeted floor surfaces such as vinyl, tile and sealed wood, It is not intended for use on carpet or rugs. / Press handle release button (C) to fold handle to storage position, CAUTION: To prevent damage to wood floors, follow the flooring manufacturer's cleaning recommendations. If using cleaner on sealed wood floors, inspect floor surface for worn finish, bare wood or separated joints. Do not use Impulse TM power mop to wet clean sealed wood floors if any of these conditions exist. Mode selector switch MM z ( ;cRu_ OFF 'ICKU The switch has 3 positions, SCRUB - the agitator brushes are ON, Suction will be OFF, OFF - the power mop is turned OFF, PICK UP - the agitator brushes are OFF, The mop's suction will pick up the dirty solution, The tanks Clean solution (upper tank) tank The clean solution tank holds the cleaning solution that is to be dispersed onto the surface to be cleaned, How to fill / Place cleaner handle in upright, locked position, m To remove tank, press down on release button (A) and pivot tank forward, 1.0 oz.t30ml. 1.0 oz./30ml. Carry tank to a sink, Rotate tank cap counter-clockwise and lift up to remove cap, Check for worn spots or joint separations before using, as these conditions could lead to damaged flooring when using water to clean floor, HOOVER_ Floor-to-Floor TM Cleaner has been specifically formulated to resist excessive foaming and other undesirable effects when used in your Impulse TM cordless power mop, Turn cap upside down to serve as a measuring cup, When cleaning floor surfaces such as vinyl, ceramic and other tiles, and linoleum, use cap to measure 1 oz, of HOOVER,> Floor-to-Floor TM Cleaner, When cleaning laminate wood, polyurethane sealed wood or other wood floors that can normally be cleaned using water, use cap to measure 1 oz, of HOOVER,> Floor-toFloor TM Cleaner, DO NOT use cleaning concentrates that contain pine or solvent based ingredients. Conffnued _ 5 Pourcleaningconcentrate intotank, Filltanktofill line(1 pint)withwarm water, Replacecap,Rotatecapclockwise untilit locksin place,Capmustbe lockedin placefor properperformanceandto preventleaking, Positionbottomoftankintocleaner, Presslatchandsnaptankin place, Recovery Tank (lower tank) The recovery tank holds dirty cleaning solution that is picked up from the floor surface, Automatic Shut-Off An automatic suction shut-off is built into the recovery tank to prevent the tank from overflowing, When the recovery tank is full, the automatic shut-off activates, and the cleaner will not pick up dirty solution and the sound of the motor will change, How to Empty Turn cleaner off. To remove tank, press down on release button (A) and pivot tank forward, The filter screen may also be cleaned by rinsing it under running water, The tank lid contains a washable, reusable filter, Clean this filter when suction is low or reduced, Dry or loose debris will also collect on the filter screen (D) in the tank lid, Remove debris from screen, Press down on tank lid latch (B) and remove the tank lid (C), Empty tank, To clean Toreplacelid,aligntab (E)on lid withholeonfrontoftank(F). Snaplatchovertabs(G)on backof tank. Toreplacetank,insertbottomoftank intocleanerandpivottop portionuntil it is lockedinplace. filter Turn cleaner OFF. Remove recovery tank and lid (Fig. 312 & 3-13). Remove filter lid (A), then remove filter. Remove loose debris from filter by either brushing or tapping the filter. The filter may also be rinsed for additional cleaning. Allow filter to air dry between uses. To clean floor tile, linoleum, 1. Vacuum floor. Replace filter lid. Press down firmly to secure the seal. (vinyl, etc.) 2. Fill solution tank with HOOVER_ Floor-to-Floor TM Cleaner and water, according to instructions for Figs. 3-5 through 3-11, Do not use pine or solvent based cleaning concentrates in your cleaner. Do not use any type of wax in your cleaner. 3. Lower handle to operating position. 4. Set mode selector switch to SCRUB. This will turn the brushes ON. 6. After area is cleaned, move the mode selector switch to PICK UP. The agitator brushes are OFF and the mop's suction will pick up the dirty solution. Move cleaner over the area to pick up the dirty solution. 7. To continue cleaning another area, move mode selector switch to SCRUB. Repeat with steps 5 and 6. NOTE: To extend battery charge, it is recommended that a small area (2' x 3') be cleaned completely in SCRUB mode, then switch to PICKUP mode. Continue cleaning in 2' x 3' areas, scrubbing first, followed by pickup. Battery operating time will be approximately 25-33 minutes if this procedure is followed for cleaning floors. When switching between SCRUB and PICKUP, it is not necessary to turn the cleaner off. Simply move the mode selector switch back and forth 5. To release solution, squeeze trigger (A). Slowly move cleaner forward and backward over area (approx. 2' x 3' sections) to be cleaned. Squeeze trigger to release solution as needed. Overlap strokes by one inch to help prevent streaking. Cleaning floors sealed wood between the two settings. Your HOOVER Impulse TM cordless power mop may be used to clean wood floors that have been sealed 8. Empty recovery tank or clean the filter when the motor sound becomes with a polyurethane coating and can be cleaned with water, higher in pitch and there is a loss of suction (see "Automatic Shut-Off", page 6). CAUTION: To prevent damage to wood floors, follow the flooring manufacturer's cleaning recommendations. If using cleaner on sealed wood floors, inspect floor surface for worn finish, bare wood or separated joints. Do not use Impulse TM mop to wet clean sealed wood floors if any of these conditions exist. Continued _ 7 1. Inspect floor surface for worn finish. bare wood or separated joints. Do not use your Impulse TM power mop to wet clean the floor if any of these conditions exist. 5. Set mode selector switch to SCRUB, This will turn the brushes ON. 3. Fill solution tank with HOOVER,> Floor-to-Floor TM Cleaner and water. 6. To release solution, squeeze trigger. Slowly move cleaner forward and backward over area (approx. 2' x 3' sections) to be cleaned. Squeeze trigger to release solution as needed. according to instructions for Figs. 3-5 through 3-11. Overlap strokes by one inch to help prevent streaking. Do not use pine or solvent based detergents. Do not put any type of wax in your cleaner. 7. After area is cleaned, move the mode selector switch to PICK UP. The agitator brushes are OFF and the mop's suction will pick up the dirty solution. 2. Vacuum floor. 4. Lower handle to operating position. When switching between SCRUB and PICKUP. it is not necessary to turn the cleaner off. Simply move the mode selector switch back and forth between the two settings. 9. Empty recovery tank or clean the filter when the motor sound becomes higher in pitch and there is a loss of suction (see "Automatic Shut-Off". page 6). Picking Move cleaner over the area to pick up the dirty solution. 8. To continue cleaning another area. move mode selector switch to SCRUB. Repeat with steps 6 and 7. NOTE: To extend battery charge, it is recommended that a small area (2' x 3') be cleaned completely in SCRUB mode, then switch to PICKUP mode, Continue cleaning in 2' x 3' areas, scrubbing first, followed by pickup, Battery charge time will be between 25-33 minutes if this procedure is followed for cleaning floors, Up Spills Your cleaner may also be used to pick up small liquid spills (1 pint or less, never to exceed 1/4 inch in depth) on non-carpeted floors. Lower handle to operating position. Set mode selector switch to PICKUP. Slowly move the cleaner over the spill. The mop's suction will pick up the spill. Do not use the cleaner to pick up flammable or combustible liquids or chemicals. Do not use the cleaner to pick up detergents that contain pine or solvent based ingredients. Battery Battery charging indicator c Firmly press charger end into cleaner receptacle (C). located on the back of the cleaner. Press firmly on cleaner to ensure that end of cord is fully connected. Your cleaner will begin charging. It is designed to be stored on charge and ready for use at all times. light What do the different light colors mean? • The indicator light will be SOLID ORANGE when the unit is plugged into the charger and there is no charge left on the battery. • The indicator light will be SOLID GREEN when the battery is at full charge, and the cleaner is plugged into the charger. During cleaner use. when the battery is low and there is approximately two minutes of run time left. the indicator light will flash. • The indicator light will BLINK RED if the battery is low and the cleaner is 8 With switch in OFF position, plug charger (B) into 110/120 volt electrical outlet. not plugged into the charger. The cleaner can be on a constant charge so it is always ready for use. Make sure it is in OFF position before charging. However. if the cleaner will not be used for several weeks at a time. unplugging recommended. it is Charge battery for 16 hours before initial use. If performance drops to an unacceptable level during cleaning, refer to "Troubleshooting" section. NOTE: • It is warm Never above normal for the charger to feel when the battery is charging. charge battery in temperatures 100 ° F or below 32 ° F. • Charginglightilluminates orange whencleaneris charging,Whenbatteryis atfullcharge,thecharging lightwillilluminategreen, Cleaning the nozzle Turn cleaner OFF. Do not use an outlet which is controlled with a wall switch for charging your cleaner. Slide the two nozzle release latches (B) outward, The cleaner's nozzle (A) can be removed for easy cleaning, A Remove nozzle (A) by pulling straight out, Rinse nozzle under running water, Remove debris from squeegee (C) and wipe with a damp cloth, Cleaning the brushes Turn cleaner OFF. Remove tanks to prevent possible leaks, Set tanks aside, To replace nozzle, make sure latches are out, Cleaner should be in the While holding nozzle in place, slide latches inward to lock in place, upright position for easier assembly of the nozzle, Align middle section (D) of nozzle with opening on cleaner (E), WARNING: Agitator brush roll can start suddenly. Extra care must be taken when cleaning the agitator brushes. CAUTION: Any other servicing should be performed by an authorized Hoover Service Representative. The appliance has no user serviceable parts. Turn cleaner over so that the bottom is facing up, Carefully remove debris from the the agitator brush roll (A), ConHnued _ 9 Storage Turn cleaner OFF. If battery needs charging, refer to "Maintenance Battery Charging". • Empty and rinse solution and recovery tanks, Allow to air dry, • Allow filter in recovery tank lid to dry, • Make sure that nothing is pressing on the nozzle squeegee, • Do not store cleaner on a wood surface unless cleaner is completely dry, Storage Dispose of battery pack in accordance with your state's laws, Your um batteries, When these batteries no longer recharge, they must be removed from the cleaner and disposed of properly in accordance with state laws as described below, NOTE: Do not remove the batteries to recharge them, The batteries should only be removed if they no longer recharge and you plan to dispose of the cleaner, tray How pack r: _:] to remove A\ _ battery BA Using a Phillips screwdriver, remove screws (A) on battery door (B), Remove door, A \ / A convenient tray provides storage of your power mop and helps to protect the brushes and squeegee when not in use, Place the cordless mop in the tray with the wheels in the recessed areas to the back (A) and the nozzle to the front, 10 Battery pack replacement should be done only by an authorized Hoover Service Representative. Contact your local Hoover Sales and Service Center. Remove battery pack from unit, To disconnect battery pack from terminal, push down on tab (C) and pull connector (D) straight out, The EPA certified RBRC e>Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery indicates The Hoover Company is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada, The RBRC e_ program provides a convenient alternative to placing used Ni-Cad batteries into the trash or the municipal waste stream, which may be illegal in your area, Please call 1-800-8-BATTERY TM for information on Ni-Cd battery recycling and disposal bans/restrictions in your area, Hoover's involvement in this program is part of our commitment to preserving our environment and conserving our natural resources, Service If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the check list below, Possible cause Possible solution • Battery not charged • Recharge battery making sure cleaner is fully connected to end of cord • NO Voltage in wall plug • Check fuse or breaker • Blown fuse/tripped breaker • Replace fuse/reset breaker, Possible cause Possible solution •Automatic shut-off activated • Turn cleaner OFF and then ON again or • Empty recovery tank (see "Automarie shut-off" section) • Filter or filter lid missing or not positioned correctly • Ensure recovery tank filter and filter lid are properly positioned in the recovery tank lid (Figs, 3- 77 & 3- 78) • Recovery tank and/or solution tank not positioned properly • Ensure that both tanks are locked in place, • Filter is dirty • Clean f)lter • Nozzle not properly positioned • Ensure nozzle is replaced proper!y and locked (Figs, 4-5 & 4-6), Possible cause Possible solution • Excess cleaning concentrate foaming in tanks • Use HOOVERm_ Floor-to-Floor TM Cleaner, it is a low-foam formulation, If using cleaning concentrate other than HOOVERm_ Floor-to-FlooF _ Cleaner, remix cleaning solution using less concentrate, • Solution tank not properly installed • Ensure that tank is installed properly (Fig, 3-11) • Recovery tank is full • Empty tank Possible cause Possible solution • Cleaner not set for PICKUP • Set mode selector switch to PICKUP • Recovery tank not properly installed • Ensure that recovery tank is installed properly (Fig, 3- 76), • Recovery tank full/automatic shutoff engaged. • Remove and empty recovery tank, • Filter or filter lid missing or not properly positioned • Ensure recovery tank filter and filter lid are properly positioned in the recovery tank IM (Figs, 3-77 & 3-78), Possible cause Possible solution •Solution tank not firmly in place • Make sure tank is securely locked in position, • Solution tank empty • Refill solution tank, ',t'_ RP2JTi_I:]'D__; I'_;h'[_ Possible cause Possible solution • Mode selector switch set for PICKUP • Move mode selector switch to SCRUB position (Fig, 3-4), • Circuit breaker inside cleaner is tripped • To reset the breaker: (1) Slide the mode selector switch to OFF, (2) Wait one minute, (3) Turn the mode selector switch to SCRUB and continue cleaning, If the brushes continue to stall and the breaker trs_s again, clean the brushes to remove debris, (Fig, 4-7) To obtain approved HOOVER service and genuine HOOVER parts, locate the nearest Hoover Sales and Service Center or Authorized Hoover Warranty Service Dealer (Depot) by: •checking the Yellow Pages under "Vacuum Cleaners Household" OR • checking the list or Sales and Service Centers provided with this cleaner OR • checking the Service section or Hoover on-line at hoover.corn OR• calling 1-800-944-9200 for an auto= mated referral or authorized service outlet locations (U,S, only), Do not send your cleaner to Hoover in North Canton, Ohio [or service, this will only result in delay. I[ [urther assistance is needed, contact the Consumer Response Center, Phone: 1-330-499-9499. In Canada, contact Hoover Canada, Burlington, Ontario LTR 4A8, Phone: 1-800=263-6376. Always identi[y your cleaner by the complete model number when requesting information or ordering parts, (The model number appears on the back or the cleaner,) Possible cause Possible solution • Charger not firmly plugged in • Plug charger in firm!y Continued --_ 11 Full One Year Warranty (Domestic Use) Your HOOVER_m appliance is warranted in normal household use, in accordance with the Owner's Manual against original detects in material and workmanship [or a period or one rull year from date or purchase, This warranty provides, at no cost to you, all labor and parts to place this appliance in correct operating condition during the warranted period, This warranty applies when the appliance is purchased in the United States including its territories and possessions, or in Canada or from a U. S, Military Exchange. Appliances purchased elsewhere are covered by a limited one year warranty which covers the cost or parts only, This warranty does not apply ir the appliance is used in a commercial or rental application, This warranty only applies when the product is in use in the country or territory in which it is purchased. Warranty service can only be obtained by presenting the appliance to one or the following authorized warranty service outlets. Proor or purchase will be required before service is rendered. 1, Hoover Sales and Service Centers 2. Hoover Authorized Warranty Service Dealers (Depots). For an automated referral of authorized service outlets in the U.S.A., phone 1-800-944-9200 OR Visit Hoover on-line at hoover.corn This warranty does not cover pick up, delivery, or house calls; however, i[ you mail your appliance to a Hoover Sales and Service Center for warranty service, transportation will be paid one way. While this warranty gives you specific legal rights, you may also have other rights which vary [rom state to state. I[ [urther assistance is needed, or i[ there are questions concerning this warranty or the availability or warranty service outlets, phone the Consumer Response Center, Phone 1-330-499-9499, In Canada, contact Hoover Canada, Burlington, Ontario L7R 4A8, 1-800-263-6376, 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 12 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 4, 0, 0, 13 Create Date : Wed Apr 23 05:54:32 2008 Author : Title : Subject :EXIF Metadata provided by EXIF.tools