Hopwell Electronics JSD Car Entertainment System User Manual 15 JSD 520 UserMan

Hopwell Electronics Car Entertainment System 15 JSD 520 UserMan

15_JSD-520 UserMan

SPECIFICATIONSFrequency RangeSensitivityI.F. FrequencyFrequency ResponseStereo SeparationS/N RatioFM TUNER87.5~108.0MHz12dB µV10.7MHz40Hz~15KHz(±3dB)＞28dB＞50dBGENERALPower Supply VoltageMax Current ConsumptionMax Output Power12V DC, Negative Ground15A4x60WNote: specifications and the design are subject to possible modification without notice due to improvement.WIRING DIAGRAMMO DE B AN DAM S 2/INT 3/RPT4/RDM5/-10 6/+101/60WX4 JSD-520CL KEQ/LOUDMICDIR- DIR+RESBT /A PE /WAV /W MA /M P3 /F MOperating Voltage:12V DCFrequency Range: FM 87.5~108.0MHz Blue: Power AntennaFront Left SpeakerRear Left SpeakerBlack: Ground (B-)Yellow: Memory Backup(B+)Red: Ignition Switch(ACC)Front Right SpeakerRear Right SpeakerFuseWIRING PLUGWhiteWhite/blackGreenGreen/blackGreyGrey/blackPurplePurple/blackAntenna Input ConnectorWhite: Left Front Audio OutRed: Right RearAudio OutRed: Right Front Audio OutWhite: Left Rear Audio OutWIRING SOCKET
Bluetooth: Search for Bluetooth devices on your phone. Pair to device using the password "0000". Some phone automatically connect to the search.LOCATION OF CONTROLOPERATION MANUAL1.POWER ON/OFF Short press turn on, long press three seconds turn off. 2.MODE--FUNCTION SELECTOR Push this button repeatedly and the lcd will display the following sequence: RADIO →USB →SD . 3.AUTO SEEK SEARCH TUNING (AMS) , short press for the browser, long press to automatically save the station. In playback , the function is to choose the song.4.BAND BUTTON In radio mode, each band is toggled cyclically by pressing the key FM1-FM2-FM3. 5./6. / BUTTON Track skip in MP3 player mode (usb/sd/mmc) / radio search; Press the button during playback to go to the desired track; Press to search to the desired radio station.7. 1/ BUTTON Memory station 1-6 for radio control the playback of your music coming through the usb or sd/mmc external device by pressing once to start playback. During "play" repress the button to pause playback. Press the button once more to resume play.→AUX-IN→BTIn bluetooth mode, short press to end call.In radio modemode In bluetooth mode, short press to answer call.8. 2/INT BUTTON When this button is pressed, 'INT' indication is displayed and the first several seconds of each track is played. Press again to stop intro and listen to track.9. 3/RPT BUTTON When this button is pressed, 'RPT' indication is displayed and the selected track will be continually repeated until the track repeat mode is cancelled by pressing the 'RPT' button again.10. 4/RDM BUTTON When this button is pressed, 'RDM' indication is displayed and the tracks are played in random instead of normal progression. To cancel random mode, press the 'RDM' button again.11. 5/-10 BUTTON In playback mode, short press to -10, long press to choose a folder.12. 6/+10 button In playback mode, short press to +10, long press to choose a folder.13.SD CARD SLOT Insert the SD/MMC card in the slot by pushing it gently inward. Select SD with the mode selector. The music starts to play automatically. * Support music file format: MP3,WMA .14.AUX IN JACK Insert your portable player into the jack, in any playing mode, audio will come through the car speaker.15.USB PORT Use a usb cable (not included) if necessary, to connect your portable mp3 player.16.LCD DISPLAY The LCD display show the actual reception and function.17.VOLUME / SELECT CONTROL Rotate the volume knob to control the volume. To select other function, Press the select button shortly until the desired function is shown on the display. * volume (rotate knob) →select (push down) →bass→treble balance→fader→loud→ EQ (flat-pop-classic-rock)18.RESET BUTTON Restore factory defaults.19.EQ & LOUD BUTTON EQ (flat-pop-classic-rock); Loudness ON/OFF20.CLK BUTTON Electronic clock button.OPERATING INSTRUCTIONS1. Power ON/OFF2. Function Selector ( ) 3. Auto Seek Search Tuning (AMS)4. Band Button (FM1-2-3) 5./6. Track Skip/ Search Forward/ Backward , Manual Auto Search Radio7. Memory Station 1~6 for Radio and Play/pause Function for MP3/WMA8. Intro Function for MP3/WMA9. Repeat Function for 10. Random Function for 11. -10 Function for 12. +10 Function for 13. SD Card Slot14. Aux In Jack15. USB Port16. LCD Display17. Volume / Select Control18. Reset Button19. EQ Button20. CLK Buttonradio/usb/sd/aux-in/bt& End callFMFM& Answer callMP3/WMAMP3/WMAMP3/WMAMP3/WMA
FCC Warning: FCC ID: 2ABQZ-JSD Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter

Navigation menu