Hosiden RM1017 Wireless Low Energy Module User Manual Operational description

Hosiden Corporation Wireless Low Energy Module Operational description

User Manual.pdf

User manual of HRM1017  Product: Wireless low energy module Model: HRM1017  For OEM integration only – device cannot be sold to general public.   Therefore we will not supply the User’s manual, the installation manual is the official for OEM.  FCC ID: VIYRM1017   ■Operational Information This module has been tested and found to comply with the limits for a Class B digital device pursuant to Part15 of FCC rules. This module complies with Part15 subpart C of the FCC rules. Customers should check Part15 subpart B compliance with their own final products and conduct certification if needed.   ■Caution Any  changes  or  modifications  are  not  expressly  approved  by  Hosiden  responsible  for compliance could void the user’s authority to operate the equipment.   ■Requirement of Labeling  Please describe the following item on the final product including this module:                                                   or       *If the device is too small to show the statement above, it can be placed on the user’s manual or on a container.   Contains Transmitter Module FCC ID: VIYRM1017 Contains FCC ID: VIYRM1017 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
■Requirement of User’s Manual Statement “This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.”   FCC NOTICE [Intended for Mobile equipment] This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).       [Intended for Portable equipment] This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).
Federal Communication Commission Interference Statement  This  device  complies  with  Part  15  of  the  FCC  Rules.  Operation  is  subject  to  the following two conditions: (1) This device may not cause harmful interference, and (2) this  device  must  accept  any  interference  received,  including  interference  that  may cause undesired operation.  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.    These limits are designed to provide reasonable  protection  against  harmful  interference  in  a  residential  installation.  This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.    However, there is no guarantee that interference will not occur in a particular installation.    If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.  FCC  Caution:  Any  changes  or  modifications  not  expressly  approved  by  the  party responsible for compliance could void the user's authority to operate this equipment.  This  transmitter  must  not  be  co-located  or  operating  in  conjunction  with  any  other antenna or transmitter.  Radiation Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
This device is intended only for OEM integrators under the following conditions:  1) The transmitter module may not be co-located with any other transmitter or antenna.   2) Module approval valid only when the module is installed by the OEM integrator.  As  long  as  2  conditions above  are  met,  further transmitter  test will  not  be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed  IMPORTANT NOTE: In the event that these conditions can not be met (for example certain  laptop  configurations  or  co-location  with  another  transmitter),  then  the  FCC authorization is no longer considered valid and the FCC ID can not be used on the final product.  In  these  circumstances,  the  OEM  integrator  will  be  responsible  for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.  End Product Labeling The final end product must be labeled  in a  visible area with the following:  “Contains       FCC  ID:  VIYRM1017”.  The  grantee's  FCC  ID  can  be  used  only  when  all  FCC compliance requirements are met.  Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.

Navigation menu