Hosiden RM1017 Wireless Low Energy Module User Manual Operational description

Download:
Mirror Download [FCC.gov]
Document ID	1965874
Application ID	0U4JbbT3/63yfoYNc/tF5Q==
Document Description	User Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.15kB (114412 bits)
Date Submitted	2013-05-16 00:00:00
Date Available	2013-11-12 00:00:00
Creation Date	2013-05-16 16:23:01
Producing Software	Microsoft® Word 2010
Document Lastmod	2013-05-16 16:12:49
Document Title	Operational description
Document Creator	Microsoft® Word 2010
Document Author:	F.Jyobe

User manual of HRM1017
Product: Wireless low energy module
Model: HRM1017
For OEM integration only – device cannot be sold to general public.
Therefore we will not supply the User’s manual, the installation manual is the official for OEM.
FCC ID: VIYRM1017
■Operational Information
This module has been tested and found to comply with the limits for a Class B digital device
pursuant to Part15 of FCC rules. This module complies with Part15 subpart C of the FCC
rules. Customers should check Part15 subpart B compliance with their own final products
and conduct certification if needed.
■Caution
Any changes or modifications are not expressly approved by Hosiden responsible for
compliance could void the user’s authority to operate the equipment.
■Requirement of Labeling
Please describe the following item on the final product including this module:
Contains Transmitter Module FCC ID: VIYRM1017
or
Contains FCC ID: VIYRM1017
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
*If the device is too small to show the statement above, it can be placed on the user’s manual or on a container.
■Requirement of User’s Manual Statement
“This transmitter must not be co-located or operated in conjunction with any other antenna
or transmitter.”
FCC NOTICE
[Intended for Mobile equipment]
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement
C to OET65. This equipment has very low levels of RF energy that it deemed to comply
without maximum permissive exposure evaluation (MPE). But it is desirable that it should be
installed and operated keeping the radiator at least 20cm or more away from person’s body
(excluding extremities: hands, wrists, feet and ankles).
[Intended for Portable equipment]
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement
C to OET65. This equipment has very low levels of RF energy that are deemed to comply
without testing of specific absorption ratio (SAR).
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in this
manual. The further RF exposure reduction can be achieved if the product can be kept
as far as possible from the user body or set the device to lower output power if such
function is available.
This device is intended only for OEM integrators under the following
conditions:
1) The transmitter module may not be co-located with any other transmitter or antenna.
2) Module approval valid only when the module is installed by the OEM integrator.
As long as 2 conditions above are met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end-product for any
additional compliance requirements required with this module installed
IMPORTANT NOTE: In the event that these conditions can not be met (for example
certain laptop configurations or co-location with another transmitter), then the FCC
authorization is no longer considered valid and the FCC ID can not be used on the final
product. In these circumstances, the OEM integrator will be responsible for
re-evaluating the end product (including the transmitter) and obtaining a separate FCC
authorization.
End Product Labeling
The final end product must be labeled in a visible area with the following: “Contains
FCC ID: VIYRM1017”. The grantee's FCC ID can be used only when all FCC
compliance requirements are met.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the user’s manual of the end
product which integrates this module.
The end user manual shall include all required regulatory information/warning as show
in this manual.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Annotate, Fill forms
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2013:05:16 16:23:01+09:00
Creator Tool                    : Microsoft® Word 2010
Modify Date                     : 2013:05:16 16:12:49+08:00
Metadata Date                   : 2013:05:16 16:12:49+08:00
Format                          : application/pdf
Creator                         : F.Jyobe
Title                           : Operational description
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:27c982e3-1a4c-4b0b-82ff-77e8bf3219d8
Instance ID                     : uuid:d2203fb3-feb6-4871-9308-bccd1f7f9834
Page Count                      : 4
Language                        : ja-JP
Author                          : F.Jyobe

EXIF Metadata provided by EXIF.tools