Hospira 20677 PlumA + with MedNet Wireless Enabled Infuser User Manual

Hospira, Inc. PlumA + with MedNet Wireless Enabled Infuser 735 95537 002 Insert Module Installation

a href="https://usermanual.wiki/Hospira" itemprop="url"> Hospira >

Contents

Installation Manual

Hospira, Inc. Lake Forest, IL, U.S.A Copyright 2005 735-95537-002 (Rev. 05/05)Note: The recommended tool for this procedure is a No. 2 Phillips screwdriver.CAUTION: Use proper ESD grounding techniques when handling components. Wear an antistatic wrist strap and use an ESD-protected workstation. Store the PWA in an antistatic bag before placing it on any surface.DTo replace the module, proceed as follows:1. Press [ON/OFF] to power the infuser OFF. 2. Disconnect the infuser from AC power.CAUTION: Infuser must be powered off for at least 2 minutes prior to removing the module.3. Carefully place the infuser face down.4. Using a No. 2 Phillips screwdriver, remove the two screws from the module (one in the upper left corner and one in the lower left corner). Refer to Figure 1.5. Carefully pull the module away from the infuser. Note: When removing the module, note the placement guides the peripheral PWA rests between.6. Install the replacement module in the exact reverse order of removal using the screws and lock washers included with the replacement module. Refer to Figure 2.Note: Verify the module is placed properly between the guides and fits correctly into the CPU PWA. 7. Connect the infuser to AC power. 8. To verify successful module replacement, power ON the infuser and let the system perform its self-tests. The screen will display an E453 Malfunction. 9. Power the infuser OFF, and then ON again. 10. If upgrading from version 12.x, The infuser is ready for operation.11. If upgrading from version 10.x or 11.x:a) Enter the serial number. a) Power the infuser OFF, and then ON again. The infuser is ready for operation.Figure 1. Remove ScrewsFigure 2. Insert ModuleInstalling the Hospira MedNet™ Plug ‘n Play Module List 20677 For use with Hospira Plum A+ Infusers with software version 10.3 and higher
Download: Hospira 20677 PlumA + with MedNet Wireless Enabled Infuser User Manual
Mirror Download [FCC.gov]Hospira 20677 PlumA + with MedNet Wireless Enabled Infuser User Manual
Document ID545432
Application ID2bzNWhkWyVLoiqr0RjLmpQ==
Document DescriptionInstallation Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize6.33kB (79106 bits)
Date Submitted2005-05-25 00:00:00
Date Available2005-05-25 00:00:00
Creation Date2005-05-19 15:37:31
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2005-05-19 16:52:10
Document Title735-95537-002_Insert Module Installation.fm
Document CreatorPscript.dll Version 5.0
Document Author: 10127364
FCC ID Filing: STJ-20677

Navigation menu