Hp 1105 All In One Desktop Pc Reference Guide Elwood2 AIO IPSM

: Hp Hp-1105-All-In-One-Desktop-Pc-Reference-Guide-141192 hp-1105-all-in-one-desktop-pc-reference-guide-141192 hp pdf

Open the PDF directly: View PDF .
Page Count: 3

Download
Open PDF In Browser	View PDF

Illustrated Parts & Service Map
HP Pro 1105 Series All-in-One Business PC
© 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. HP shall not be liable for
technical or editorial errors or omissions contained herein. Intel, Pentium,
Intel Inside, and the Intel logo are trademarks or registered trademarks of the
Intel Corporation and its subsidiaries in the U.S. and other countries.

Document Number 713370-003.

3rd Edition

March 2013.

Miscellaneous Parts
1

Fan (blower)

2

Speaker kit, includes left and right speakers

669981-001
678227-001

3

Rubber grommet for use in the hard drive cage

669991-001

*

Mouse, USB, optical

596410-001

*

HP Business Digital Headset

642738-001

*Not shown

Key Specifications
Processor Type

AMD Dual Core E1-1200 (1.40 GHz, 1 MB L2 cache)

RAM Type

PC3-10600 DDR3, 1333 MHz, non-ECC SDRAM

Maximum RAM Supported

8 GB (2 SODIMM slots)

Display

18.5-inch, HD, anti-glare, non-touch

Expansion Slots

(1) Mini PCIe x1, half-height

Graphics Adapter

Integrated ATI Radeon HD 7310
Microsoft® DirectX® 11 capable

Chipset

AMD A68 FCH

Drive Support

(1) 5.25-inch Slimline, (1) 3.5-inch hard drive

I/O Interfaces

Side: (2) USB 3.0, (1) microphone in, (1) headphone
out, (1) 6-in-1 card reader
Rear: (4) USB 2.0, (1) Power connector, (1) RJ-45
Ethernet, (1) Stereo audio line out

Operating Systems

Windows 8 Professional 64-bit
Windows 8 64-bit
FreeDOS

Cables

Spare Parts

1

LVDS cable

669996-001

2

Optical drive cable

669998-002

3

Hard drive cable

669997-001

4

Webcam cable

669995-001

*

Antenna

669974-001

*

Backlight cable for use with AUO and CMI display panels

710536-001

*

Backlight cable for use with LG display panels

710537-001

Mass Storage Devices (not illustrated)
HP SuperMulti DVD Writer Drive (includes bezel)

657958-001

1 TB hard drive

621418-001

750 GB hard drive

632938-001

500 GB hard drive

621421-001

320 GB hard drive

621420-001

250 GB hard drive

621419-001

Keyboards (not illustrated)
Jade, wired, USB
Wireless, OTP (-201 only)
Wireless (-161 only)

System Unit
1

Front bezel

710542-001

Display panel, 18.5-inch, CCFL, non-ZBD, 200 nits
2

AUO

*

CMO

710539-001

*

LG

710540-001

3

Rear cover (does not include stand)

669985-001

4

Foot assembly

669986-001

5

Side I/O cover assembly, USB 3.0

710543-001

6

Stand

669988-001

*

Mylar, for use on stand hinge

669994-001

655571-xx1
678360-xx1
708630-xx1

Brazilian Portuguese

-201

Latin America Spanish

-161

U.S.

-001

710538-001

* Not shown

HP Pro 1105 Series All-in-One Business PC

713370-003

page 1

System Setup and Boot
Access the Setup Utility during computer boot by pressing the F10 key. If you do not
press F10 at the appropriate time, you must restart the computer and again press F10
when the monitor light turns green. NOTE: Not all settings are available for all models.
Computer Setup Menu
Heading

Option/Description

File

System Information - Lists the following main system specifications:
•
•
•
•
•
•

Product name
SKU number (some models)
Processor type/speed/stepping
Cache size (L1/L2/L3)
Installed memory size/speed/ch
Integrated MAC Address

•
•
•
•
•

System BIOS
Chassis serial number
Asset tracking number
ME firmware version
ME management mode

About - Displays copyright notice.
Set Time and Date - Allows you to set system time and date.
Replicated Setup - Allows you to save or restore system configuration to/
from a USB flash drive.

Boards. memory processors
1

System board with AMD E1-1200 processor, USB 3.0 (includes
heat sink, gasket, processor, replacement thermal material)

703642-001

Default Setup - Allows you to save current settings as default or restore
factory settings as default.

2

Backlight controller

710541-001

Apply Defaults and Exit - Applies the selected default settings and clears
any established passwords.

3

Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo
Adapter (WLAN module)

701399-001

Ignore Changes and Exit - Exits Computer setup without saving changes.

*

Ralink RT5390R 802.11bgn 1x1 Wi-Fi Adapter (WLAN module)

701396-001

Save Changes and Exit - Saves changes to system configuration or
default settings and exits Computer Setup.

4

Webcam module, 720p HD

710544-001

5

4-GB memory module (PC3-12800, SODIMM)

689373-001

*

2-GB memory module (PC3-12800, SODIMM)

689372-001

*

1-GB memory module (PC3-10600, SODIMM)

646808-001

Storage

Device Configuration - Lists all installed BIOS-controlled storage
devices. The following options are available:
•
•
•
•

*not illustrated

CD-ROM
Hard Disk
Default Values
Translation Mode

•
•
•
•

SSD Life Used
SMART (ATA disks only)
Diskette
SATA Defaults

Storage Options - Allows you to set:
• eSATA Port - Set SATA port as eSATA port for use with external drive.
• SATA Emulation - Choose how the SATA controller and devices are
accessed by the OS. SATA Emulation choices are AHCI, RAID, or IDE.
• Removable Media Boot - Enables/disables ability to boot the system
from removable media.
• Max eSATA Speed - Allows you to choose 1.5 Gbps or 3.0 Gpbs as
the maximum eSATA speed. By default, the speed is limited to 1.5
Gbps for maximum reliability.

System Board

DPS Self-Test - Execute self-tests on ATA hard drives capable of performing the Drive Protection System (DPS) self-tests.
Boot Order - Specify boot order for UEFI and legacy boot sources. Also
specify hard drive boot order.
• Shortcut to Temporarily Override Boot Order
Security

Setup Password - Set and enable the setup (Admin) password.
Power-On Password - Set and enable power-on password.
Password Options - Allows to you enable/disable:
• Lock Legacy Resources
• Setup Browse Mode
• Password prompt on F9 & F12
• Network Server Mode
Smart Cover - Allows you to lock/unlock the smart cover and set the
cover removal sensor to disable/notify user/setup password.
Device Security - Set Device Available/Device Hidden for: embedded security
device, system audio, network controller, USB controller, serial/parallel ports,
and SATA ports.
USB Security - Set Device Available/Device Hidden for front USB ports,
rear USB ports, internal USB ports, accessory USB ports.
Slot Security - Disable the PCI, PCIe, and Mini Card slots.
Network Boot - Enables/disables boot from OS (NIC models only).
System IDs - Allows you to update asset tag, ownership tag, UUID, keyboard locale setting.

System Board Components

Master Boot Record Security - enables/disables MBR.

INVERTER

Inverter board connector

JSPKL1

Left speaker connector

LVDS

Display connector

JSPKR1

Right speaker connector

WEBCAM

Webcam connector

LAN1

RJ-45 network connector

JDDR2

Memory slot, channel B

USB

USB port

JDDR1

Memory slot, channel A

DC INPUT

AC power connector

WLAN

Mini PCIe slot

HDD POWER Hard drive power connector

CARD
READER

Card reader

SATA HDD

Hard drive data connector

BATTERY

RTC battery slot

SATA ODD

Optical drive data connector

USB

USB ports

ODD PWR

Optical drive power connector

JMIC1

Microphone (line in)
connector

SYSTEM FAN

Fan connector

HEADPHONE

Headphone (line out)
connector

CLR_
PASSWORD

Password jumper

LINE OUT

Line out connector

CLR_CMOS

CMOS jumper

System Security - Allows you to set:
• Data Execution Prevention (enable/disable)
• SVM CPU Virtualization (enable/disable).
• Virtualization Technology (VTx) (enable/disable)
• Virtualization Technology/Directed IO (VTd) (enable/disable)
• Trusted Execution Technology (enable/disable)
• Embedded Security Device (enable/disable)
• Reset to Factory Settings (Do not reset/Reset)
• Measure boot variables/devices to PCR1 (enable/disable)
• OS management of Embedded Security Device (enable/disable)
• Reset of Embedded Security Device through OS (enable/disable)
• No PPI provisioning (Windows 8 only; enable/disable)
• Allow PPI policy to be changed by OS (enable/disable)
DriveLock Security - Allows you to assign or modify a master or user
password for hard drives.
Secure Boot Configuration (Windows 8 only)
• Legacy Support (enable/disable)
• Secure Boot (enable/disable).
• Key Management (enable/disable)
• Fast Boot (enable/disable)
Power

OS Power Management - Allows you to enable/disable Runtime Power
Management, Idle Power Savings, Unique Sleep State Blink Rates.
Hardware Power Management - Enable/disable SATA power management,
S5 maximum power savings., PCI slots, network controller, USB 3.0 controller
Thermal - Control minimum fan speed.

Advanced

Power-On Options - Allows you to set:
• POST mode (QuickBoot, Clear Memory, FullBoot, or FullBoot Every x Days)
• POST messages (enable/disable)
• Press the ESC key for Startup Menu (enable/disable)
• Option ROM Prompt (enable/disable)
• After Power Loss (off/on/previous state)
• POST Delay (none, 5, 10, 15, 20, or 60 seconds)
• Remote Wakeup Boot Source (remote server/local hard drive)
• Factory Recovery Boot Support (enable/disable)
• Bypass F1 Prompt on Configuration Changes (enable/disable)
BIOS Power-On - Set the computer to turn on at a preset time.

HP Pro 1105 Series All-in-One Business PC

713370-003

page 2

Advanced Bus Options - Allows you to enable/disable PCI SERR# Generation and
(continued) PCI VGA palette snooping.

Password Security and CMOS

Onboard Devices - Allows you to set resources for or disable on-board
system devices.

Establishing a Setup or Power-On password

Device Options - Allows you to set:
• Printer mode (Bi-Directional, EPP + ECP, Output Only)
• Num Lock State at Power-on (off/on)
• Integrated Video (enable/disable)
• Integrated Graphics (Auto/Disable/Force)
• Internal Speaker (enable/disable)
• NIC PXE Option ROM Download (enable/disable)
• SATA RAID Option ROM Download (enable/disable)
• Multi-Processor (enable/disable)
• Hyper-threading (enable/disable)
• Turbo Mode (enable/disable)

2. As soon as the computer turns on, press the Esc key while “Press the ESC key for
Startup Menu” message is displayed at the bottom of the screen.

1. Turn on or restart the computer.

3. Press the F10 key to enter Computer Setup.
4. To establish Setup password, select Security > Setup Password and follow the
instructions.
- or To establish a Power-On password, select Security > Power-On Password and
follow the instructions on the screen
5. Before exiting, click File > Save Changes and Exit.

VGA Configuration - Allows you to specify which VGA controller is the
“boot”/primary. Displayed only if add-in video card installed.

Resetting a Setup or Power-On password

AMT Configuration - Allows you to set:
• AMT (enable/disable)
• Unconfigure AMT/ME (enable/disable)
• Hide Unconfigure ME Confirmation Prompt (enable/disable)
• Watchdog Timer (enable/disable)

1. Turn off the computer and disconnect the power cord from the power outlet.
2. Remove the access panel.
3. On the system board, locate the header labeled CLR PASSWORD.
4. Remove the jumper and place it on pins 1 and 2.
5. Wait for three seconds, and then replace the jumper to its original position (pins 2
and 3).

Common POST Error Messages
Screen
Message
101-Option ROM
Error

6. Replace the access panel and reconnect the power cord.
Probable Cause

Recommended Action

7. Turn on the computer and allow it to start.

System ROM or expansion
board option ROM checksum.

1. Verify ROM, reflash if required
2. Remove recently added cards to see if
problem remains.
3. Clear CMOS. If message disappears, may
be card problem.
4. Replace system board

Resetting CMOS
1. Turn off the computer and disconnect the power cord from the power outlet.
2. Remove the access panel.

103-System Board
Failure

DMA or timers

1. Clear CMOS memory.
2. Remove expansion boards.
3. Replace system board.

3. On the system board, locate the header labeled CLR CMOS.

163-Time & Date
Not Set

Invalid time or date in configuration memory.
RTC battery may need to be
replaced.

Reset the date and time under Control Panel
(Computer Setup can also be used). If the
problem persists, replace the RTC battery.

5. Wait for three seconds, and then replace the jumper to its original position (pins 1
and 2).

164-Memory Size
Error

Memory amount has
changed since the last boot
(memory added/removed).

Press the F1 key to save the memory changes.

7. Turn on the computer and allow it to start.

164-Memory Size
Error

Incorrect memory configuration

1. Run Setup (F10).
2. Make sure memory module(s) installed
properly.
3. If third-party memory added, test using HPonly memory.
1. Verify proper module type.

201-Memory Size
Error

RSM failure

1. Ensure memory modules are correctly
installed.
2. Verify proper module type.
3. Remove and replace faulty module(s).
4. If error persists after replacing modules,
replace system board.

214-DIMM Configuration Warning

Populated DIMM configuration is not optimized

Rearrange DIMMs so that each channel has
the same amount of memory.

219-ECC Memory
Module Detected
ECC Modules not
supported on this
Platform

Recently added memory
module(s) support ECC
memory error correction.

1. If additional memory was recently added,
remove it to see if the problem remains.
2. Check product documentation for memory
support information.

301-, 304-Keyboard error

Keyboard failure.

1.
2.
3.
4.
5.

511-CPU Fan not
Detected

CPU Fan not Detected.

1. Reseat CPU fan.
2. Reseat fan cable.
3. Replace CPU fan.

1805-Ambient
Temperature Previously Over Limit

This system was placed in a
low power state to prevent
damage due to excessive
environmental temperature.

Make sure the system meets the HP enclosure
guidelines as listed in the Quick Specs, including the following:
1. Clean the air vents on the front, back, or any
other vented side of the computer.
2. Ensure that there is a 10.2 cm (4 in)
clearance on all vented sides of the
computer to permit the required airflow.
3. Ensure that computers are not so near each
other that they are subject to each other's
re-circulated or preheated air.

2200-PMM Allocation Error during
MEBx Download

(2200) Memory error during
POST execution of the Management Engine (ME) BIOS
Extensions option ROM.

1. Reboot the computer.
2. Unplug the power cord, re-seat the memory
modules, and reboot the computer.
3. If the memory configuration was recently
changed, unplug the computer, restore the
original memory configuration, and reboot
the computer.
4. If the error persists, replace the system
board.

2201-MEBx Module did not checksum correctly
2202-PMM Deallocation Error during
MEBx cleanup

(2201) Memory error during
POST execution of the Management Engine (ME) BIOS
Extensions option ROM.

4. Remove the jumper and place it on pins 2 and 3.

6. Replace the access panel and reconnect the power cord.

Reconnect keyboard with system turned off.
Check kybd connection or keys.
Check connector for bent or missing pins.
Replace keyboard.
If 304, possible sys bd problem.

(2202) Memory error during
POST execution of the Management Engine (ME) BIOS
Extensions option ROM.

2230-General
error during MEBx
execution

(2230) Error occurred during
MEBx execution which fails
into the “General” grouping.
Status information displayed
2231-ME error dur- along with the error provides
ing MEBx execufurther clarity into the failure.
tion
MEBx handles transference
of information between the
2232-AMT error
system BIOS and ME firmduring MEBx exeware.
cution
(2231) Error occurred during
2233-HECI error
MEBx execution which fails
during MEBx exeinto “ME” grouping.
cution
(2232) Error occurred during
MEBx execution which fails
into “AMT” grouping.

1. Reboot the computer.
2. If the error persists, update to the latest
BIOS version and ME firmware version.
3. If the error still persists, replace the system
board.

(2233) Error occurred during
MEBx execution which fails
into “MEI or HECI” grouping.

HP Pro 1105 Series All-in-One Business PC

713370-003

page 3



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Win7
Create Date                     : 2003:01:30 15:31:54Z
Modify Date                     : 2013:03:06 17:20:49-06:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Title                           : Elwood2 AIO IPSM.fm
Creator                         : Win7
Creator Tool                    : FrameMaker 10.0.2
Metadata Date                   : 2013:03:06 17:20:49-06:00
Producer                        : Acrobat Distiller 10.1.5 (Windows)
Document ID                     : uuid:a86675e9-d2ca-4b32-ba46-a6ab9b7dcc71
Instance ID                     : uuid:3af84614-2cc8-48cb-94fe-1ac3e52b9c43
Page Mode                       : UseNone
Page Count                      : 3

EXIF Metadata provided by EXIF.tools