Hp Cluster Software Installation Guide 3PAR Extension
2015-03-28
: Hp Hp-Cluster-Software-Installation-Guide-669615 hp-cluster-software-installation-guide-669615 hp pdf
Open the PDF directly: View PDF
Page Count: 29
- HP 3PAR Cluster Extension Software Installation Guide
- Contents
- 1 Preparing to install HP 3PAR Cluster Extension
- 2 Installing HP 3PAR Cluster Extension Software
- Prerequisites
- Pre-installation procedures
- Checking the IP network setup and SAN configuration
- Installing the multipath software
- Installing and configuring the JRE
- Installing HP 3PAR Command Line Interface (CLI)
- Configuring the HP 3PAR storage system
- Creating hosts and setting host persona
- Creating virtual volumes and adding a LUN presentation
- Creating Remote Copy volume groups
- LUN presentation to the secondary virtual volume(s)
- Installing Microsoft Failover Cluster (MSFC) on all nodes
- Installing HP 3PAR Cluster Extension Software
- HP 3PAR Cluster Extension maintenance
- Troubleshooting installation and maintenance problems
- Registering the resource type and resource extension DLL manually
- Unregistering the resource type and resource extension DLL manually
- Registering the CLX PowerShell Cmdlet DLL manually [Windows Server 2012 only]
- Unregistering the CLX PowerShell Cmdlet DLL manually [Windows Server 2012 only]
- Upgrading from HP 3PAR Cluster Extension 1.00.00 and 2.00.00 (Windows Server 2008/2008 R2)
- 3 Licensing
- 4 Support and other resources
- Glossary
- Index