Hp E5000 Messaging System For Microsoft Exchange Administrators Guide Administrator

2015-03-28

• E5000 Messaging System for Microsoft Exchange Administrator Guide
• 1 HP E5000 Messaging Systems for Microsoft Exchange
• 2 Preparing to install the messaging system
  • Exchange Server 2010 network requirements
  • E5000 EMU network connections
  • Planning the E5300 Messaging System network configuration
    • Typical E5300 Messaging System network configuration
    • E5300 Messaging System connection options
  • Planning the E5500/E5700 Messaging System network configuration
    • Typical E5500/E5700 Messaging System network configuration
    • E5500/E5700 Messaging System EMU connection options
• 3 Installing the messaging system
  • Check the kit contents
  • Locate and record the product number, serial number, and SAID number
  • Unpack and rack the messaging system hardware
  • Install E5000 expansion nodes
    • Install the hardware and cabling
  • Power on the messaging system
  • Configure the EMU and iLO management processors
  • Accessing the messaging system
  • Adding expansion nodes to an installed messaging system
  • Adding hard drives to an installed E5300 system
• 4 Configuring the messaging system software
  • Configuring server software
  • Deploying Microsoft Exchange Server 2010
  • Using Microsoft Exchange Jetstress and Load Generator
• 5 Monitoring and troubleshooting the messaging system
  • Using notification alerts
  • Configuring Event Notifier for proactive email (SMTP) event notification
  • Using the E5000 System Manager
    • System Summary
    • Hardware Status
    • Exchange Status
    • Firmware
    • Reports
  • HP System Management Homepage
    • Starting the System Management Homepage application
    • System Management Homepage main page
      • Overall System Health Status
      • Component Status summary
      • Storage
      • Enclosure
      • Network
      • System
      • Version Control
      • Software
  • Component LEDs
  • EMU CLI SHOW commands
  • HP Support websites
  • HP Insight Remote Support software
  • Microsoft Systems Center Operations Manager
  • Obtaining the Service Agreement ID (SAID)
  • Locating the messaging system warranty entitlement labels
• 6 Updating system software and firmware
  • Powering off the messaging system
  • Determining the current messaging system software version
  • Updating the messaging system software
  • Upgrading a component's firmware version
• 7 Removing and replacing hardware components
  • Customer self repair
  • Best practices for replacing components
    • During replacement of the failed component
    • Accessing component replacement videos
    • Identifying the spare part
  • Replaceable parts
  • Hot, warm, and cold swap components
  • Preventing electrostatic discharge
  • Verifying component failure
  • Verifying proper operation
  • Wait times for hard disks
  • Removing and replacing the server interposer board
  • Removing and replacing the midplane board
  • Removing and replacing a SAS cable
  • Removing and replacing the SAS I/O module
  • Removing and replacing the drive fan module
  • Removing and replacing the server fan module
  • Removing and replacing the power UID button assembly
  • Removing and replacing the power supply
  • Removing and replacing the HP StorageWorks Ethernet I/O module
  • Removing and replacing the Mezzanine NIC
  • Removing and replacing the PCIe module (with card)
  • Removing and replacing the Enclosure Manager Unit
  • Removing and replacing the server blade backplane
  • Removing and replacing the server airflow baffle
  • Removing and replacing the front bezel (standard)
  • Removing and replacing the front bezel (full)
  • Removing and replacing the front LED display board in the rack (standard)
  • Removing and replacing the front LED display board (full)
  • Removing and replacing a drive drawer
  • Removing and replacing the drive drawer hard drive
  • Removing and replacing the drive drawer rails (side or bottom)
  • Removing and replacing the enclosure rails
  • Removing and replacing the rack rails
  • Removing and replacing server blade(s)
  • Removing and replacing the server blade hard drive
  • Removing and replacing the controller and controller server blade components
    • Removing and replacing the P1210m cache module
    • Removing and replacing the capacitor pack
• 8 Messaging System recovery
  • The E5000 System Recovery DVD
  • Restoring the factory image with a DVD or USB flash device
  • Using a USB flash drive for messaging system recovery
  • Managing disks after a system restoration
    • Restoration in non-production environments
    • Restoration in production environments
• 9 Support and other resources
  • Contacting HP
    • HP technical support
    • Subscription service
  • Related information
    • HP websites
    • Microsoft websites
  • Typographic conventions
  • Rack stability
• A EMU reference
  • CLI reference
    • Command line conventions
    • Operational groups
    • Authentication
      • ADD USER
      • CLEAR SSHKEY
      • DOWNLOAD SSHKEY
      • ENABLE USER
      • REMOVE USER
      • SET PASSWORD
      • SET USER PASSWORD
      • SHOW USER
      • SHOW SSHFINGERPRINT
      • SHOW SSHKEY
      • ADD SSHKEY
      • SHOW PASSWORD SETTINGS
    • Time functions
      • SET DATE
      • SET TIMEZONE
      • ENABLE NTP
      • DISABLE NTP
      • CLEAR NTP
      • SET NTP POLL
      • SET NTP PRIMARY
      • SET NTP SECONDARY
    • Inventory and status
      • SET DISPLAY EVENTS
      • SHOW ALL
      • SHOW CONFIG
      • SHOW DATE
      • SHOW DEVICE SERIAL_NUMBER BLADE
      • SHOW DISPLAY EVENTS
      • SHOW EM
      • SHOW ENCLOSURE FAN
      • SHOW ENCLOSURE INFO
      • SHOW ENCLOSURE POWERSUPPLY
      • SHOW ENCLOSURE STATUS
      • SHOW ENCLOSURE TEMP
      • SHOW FRU
      • SHOW IOMODULES
      • SHOW RACK
      • SHOW SERVER TEMP
    • Internet control
      • ADD EBIPA
      • REMOVE EPIBA
      • SET EBIPA
      • SET EM GATEWAY
      • PING
      • SET IPCONFIG
      • SET IPCONFIG STATIC
      • SHOW NETWORK
      • SHOW EBIPA
    • Server management
      • POWEROFF SERVER
      • POWERON SERVER
      • REBOOT SERVER
      • RESET SERVER
      • SET SERVER UID
      • SET SERVER BOOT
      • SHOW SERVER NAMES
      • SHOW SERVER BOOT
      • SHOW SERVER INFO
      • SHOW SERVER LIST
      • SHOW SERVER STATUS
    • Enclosure control
      • DOWNLOAD CONFIG
      • RESTART EM
      • POWEROFF ENCLOSURE
      • POWERON ENCLOSURE
      • UPLOAD CONFIG
      • SET EM NAME
      • SET ENCLOSURE ASSET
      • SET ENCLOSURE ID
      • SET ENCLOSURE NAME
      • SET ENCLOSURE UID
      • SET FACTORY
      • SET RACK NAME
      • UPDATE IMAGE
    • Forensic
      • CLEAR SYSLOG
      • SHOW SYSLOG SERVER
      • SHOW SYSLOG EM
      • SHOW SYSLOG SETTINGS
      • TEST SYSLOG
      • SET REMOTE SYSLOG SERVER
      • SET REMOTE SYSLOG PORT
      • ENABLE SYSLOG REMOTE
      • DISABLE SYSLOG REMOTE
    • Session
      • CLEAR SCREEN
      • CONNECT SERVER
      • EXIT
      • HELP
      • SET SCRIPT
      • SHOW SESSION TIMEOUT
      • SET SESSION TIMEOUT
      • SLEEP
      • HISTORY
  • Manual button functions
    • Activate Button Menu
    • Reboot EM (bE)
    • Restore Factory Defaults (Fd)
    • Recover Lost Password (Fp)
    • Set DHCP IP Address (dH)
    • Set Link Local IP Address (LL)
    • Display Current IP Address (IP)
    • Exit Button Menu
• B Regulatory compliance notices
  • Regulatory compliance identification numbers
  • Federal Communications Commission notice
    • FCC rating label
      • Class A equipment
      • Class B equipment
    • Declaration of Conformity for products marked with the FCC logo, United States only
    • Modification
    • Cables
  • Canadian notice (Avis Canadien)
    • Class A equipment
    • Class B equipment
  • European Union notice
  • Japanese notices
    • Japanese VCCI-A notice
    • Japanese VCCI-B notice
    • Japanese VCCI marking
    • Japanese power cord statement
  • Korean notices
    • Class A equipment
    • Class B equipment
  • Taiwanese notices
    • BSMI Class A notice
    • Taiwan battery recycle statement
    • Vietnamese notice
  • Laser compliance notices
    • English laser notice
    • Dutch laser notice
    • French laser notice
    • German laser notice
    • Italian laser notice
    • Japanese laser notice
    • Spanish laser notice
  • Recycling notices
    • English recycling notice
    • Bulgarian recycling notice
    • Czech recycling notice
    • Danish recycling notice
    • Dutch recycling notice
    • Estonian recycling notice
    • Finnish recycling notice
    • French recycling notice
    • German recycling notice
    • Greek recycling notice
    • Hungarian recycling notice
    • Italian recycling notice
    • Latvian recycling notice
    • Lithuanian recycling notice
    • Polish recycling notice
    • Portuguese recycling notice
    • Romanian recycling notice
    • Slovak recycling notice
    • Spanish recycling notice
    • Swedish recycling notice
    • Turkish recycling notice
  • Battery replacement notices
    • Dutch battery notice
    • French battery notice
    • German battery notice
    • Italian battery notice
    • Japanese battery notice
    • Spanish battery notice
• Glossary
• Index