Hp E Commerce Server Accelerator Sa7120 Users Manual

2015-01-05

• hp e-commerce server accelerator sa7100/sa7120
• Table of Contents
• Introduction
  • About this User Guide
  • Who Should Use this Book
  • Before You Begin
  • How to Use this Book
• Installation and Initial Configuration
  • Before You Begin
  • Installing the SA7100/SA7120 Free-Standing or in a Rack
    • Rack Installation
    • Free-Standing Installation
    • Network Connections
    • Status Check
      • Network and Server LEDs
      • Inline LED
    • Admin Terminal Connection
    • HyperTerminal* Paste Operations
  • Troubleshooting
    • Server and Network LEDs
    • Continuing Configuration
• Theory of Operation
  • Security
  • Single Server Acceleration
  • Multiple Servers
  • Working with Internet Traffic Management (ITM) Devices
    • Positioning SA7100/ SA7120 between ITM Device and Client Network
    • Positioning SA7100/ SA7120 between ITM Device and Server
  • Multiple SA7100/SA7120s and Cascading Processing
    • Scalability and Cascading
    • Spilling and Throttling
    • Availability
  • Keys and Certificates
    • Cutting and Pasting with HyperTerminal*
    • Obtaining a Certificate from VeriSign* or Other Certificate Authority
      • Procedure
    • Exporting a Key/Certificate from a Server
      • Apache* Interface to Open SSL* (mod_ssl)
      • Apache SSL*
      • Stronghold*
      • Importing into the SA7100/SA7120
    • Creating a new Key/Certificate on the SA7100/ SA7120
      • Procedure
    • Global Site Certificates
      • Overview
      • Global Site Certificate Paste Procedure
  • Redirection: Clients and Unsupported Ciphers
  • Client Authentication
    • Creating a Client CA Certificate using OpenSSL*
  • SSL Processing
    • Server Assignment (“Mapping”)
      • Automapping
      • Automapping with user-specified key and certificate
      • Automapping with multiple port combinations
      • Deleting automapping entries
      • Manual mapping
      • Combining automapping and manual mapping
    • Blocking
      • Specific IP, Specific Port
      • Subnet, Specific Port
      • All IPs, Specific Port
      • Delete a Block
  • Failure Conditions, Fail-safe, and Fail-through
• Scenarios
  • Scenario 1—Single Server
    • Procedure for Scenario 1
      • Automapping
      • Manual Configuration
  • Scenario 2—Multiple Servers
    • Procedure for Scenario 2
  • Scenario 3—Multiple SA7100/SA7120s, Cascaded
    • Initial Configuration
    • Procedure for Scenario 3
  • Scenario 4—Different Ingress and Egress Routers
    • Procedure for Scenario 4
  • Scenario 5—Configuring a Firewall
    • Server Configuration
      • SA7120 Configuration
• Command Reference
  • Online Help
  • Command Line Interface
    • User Authentication
    • Command Line Prompt
    • Syntax
    • Abbreviation to Uniqueness
    • Moving the Insertion Point
    • Command History
    • Cutting Text
  • Command Summary
  • Command Reference
    • Help Commands
    • Status Command
    • SSL Commands
    • Port Mapping Commands
    • Operational Commands
    • Remote Management Commands
    • Alarms and Monitoring Commands
    • Configuration Commands
    • Administration Commands Logging Commands
• Remote Management
  • Overview
    • Limitations
    • Remote Management CLI Commands
  • Remote Telnet Sessions
    • Local Serial Console
    • Remote Console, Telnet
    • Changing the Telnet Port
    • Disabling Telnet
  • Remote SSH Sessions
    • Local Serial Console
    • Remote Console, SSH
    • Changing the SSH Port
    • Disabling SSH
  • SNMP
    • Standards Compliance
    • HP MIB Tree
      • Supported MIBs
      • Where to find MIB Files
    • Enterprise Private MIB Summary
    • Trap Summary
      • Standard SNMP Traps
      • Private Traps in the HP private MIB (hpssl-appliance-mib.my)
    • Enabling SNMP
      • Specifying SNMP Information
      • Community String
      • Trap Community String
• Alarms and Monitoring
  • Overview
  • Alarm Types
    • ESC: Encryption Status Change Alarm
      • Alarm Modifiers and Messages:
    • RSC: Refused SSL Connections
      • Alarm Modifiers and Messages
      • Extended Data
      • RSC Alarm CLI Commands
    • UTL: Utilization Threshold Alarm
      • Alarm Modifiers and Messages
      • Extended Data
      • UTL Alarm CLI commands
    • OVL: Overload Alarm
      • Alarm Modifiers and Messages
      • Extended Data
      • OVL Alarm CLI Commands
    • NLS: Network Link Status Alarm
      • Alarm Modifiers and Messages
      • Extended Data
  • Alarm Logging
    • Example: list logs command:
    • Example: status command
    • Example: status alarms command
  • Monitoring
    • Monitoring Reports
    • Report Configuration
      • Monitoring Reports CLI Commands
• Software Updates
  • Before Upgrading
    • Monitoring output data can interfere with import/ export operations
    • IP blocks may not persist across software upgrade
  • Using Windows* HyperTerminal*
• Troubleshooting
• Front Panel
  • Buttons and Switches
  • Front Panel LEDs
  • Connectors
• Failure/Bypass Modes
  • Bypass Button
  • Fail-through Switch (Security Level)
• Supported Ciphers
  • Cipher Strength
  • SSL Version Level
• Regulatory Information
  • Taiwan Class A EMI Statement
  • VCCI Statement
  • FCC Part 15 Compliance Statement
  • Canada Compliance Statement (Industry Canada)
  • CE Compliance Statement
  • CISPR 22 Statement
  • VCCI Class A (Japan)
  • Australia
    • WARNING
  • AVERTISSEMENT
  • WARNUNG
  • AVVERTENZA
  • ADVERTENCIAS
  • Wichtige Sicherheitshinweise
• Software License Agreement
  • Mozilla* and expat* License Information
    • MOZILLA PUBLIC LICENSE, Version 1.1
• Support Services
  • Support for your SA7100/SA7120
    • U.S. and Canada
    • Europe
    • Asia
    • Latin America
    • Other Countries
• Glossary
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • K
  • L
  • M
  • N
  • O
  • P
  • R
  • S
  • T
  • U