Hp Elitedesk 800 G1 Ultra Slim Pc Reference Guide Camelot800 USDT IPSM

: Hp Hp-Elitedesk-800-G1-Ultra-Slim-Pc-Reference-Guide-147842 hp-elitedesk-800-g1-ultra-slim-pc-reference-guide-147842 hp pdf

Open the PDF directly: View PDF .
Page Count: 4

HP EliteDesk 800 G1, USDT Chassis 723287-001 page 1

Illustrated Parts & Service Map

HP EliteDesk 800 G1 - Ultra Slim Desktop

© 2013 Hewlett-Packard Development Company, L.P. The information con-

tained herein is subject to change without notice. HP shall not be liable for

technical or editorial errors or omissions contained herein.

Document Number 723287-001. 1st Edition July 2013.

Key Specifications

Spare Parts

Processor Type Intel® Core i7, i5

RAM Type

Non-ECC DDR3 PC3-12800 (1600 MHz) SODIMM

Maximum RAM 16 GB

Expansion Slots • (2) PCIe-x16

•(1) PCIe-x1

•(1) PCI accessory (optional)

Chipset Intel Q87

Graphics Adapter Integrated Intel HD graphics

Bays and Slots • (1) Slimline optical drive bay

• (1) internal 2.5-inch drive bay

• (1) internal mSATA connector

• (2) internal PCIe mini-card connector

• (1) internal MXM graphics connector

I/O Interfaces Front: (2) USB 3.0 ports, (2) USB 2.0 ports, headphone jack,

microphone jack

Rear: (2) USB 3.0 ports, (4) USB 2.0 ports, (2) DisplayPort,

VGA, PS/2 mouse and keyboard, RJ-45 network connector,

3.5mm audio in/out jacks

Preinstalled Operating

Systems

•Windows 8

•Windows 7

• Novell SUSE Linux Enterprise Desktop 11

• FreeDOS 2.0

System Unit

1 Access panel 732763-001

2 Stand 612496-001

3 Front bezel 732764-001

* AC adapter, 180W, standard 613766-001

* AC adapter, 135W, standard 648964-001

* Bezel blank 732771-001

*Not shown

Cable and accessories

1 Optical drive cable/connector 605163-001

* Adapter, DisplayPort to VGA 632484-001

* Adapter, DisplayPort to DVI 662723-001

* Adapter, DisplayPort to HDMI 617450-001

* DisplayPort cable 487562-001

* Not shown

Keyboards (not illustrated)

PS/2

USB

Wireless

Smart card

Wireless (keyboard, mouse, dongle)

724718-xx1

724720-xx1

724722-xx1

701427-xx1

730323-xx1

Arabic -17x LA Spanish -16x

Belgian -18x Norwegian -09x

Brazilian Portuguese -20x People’s Republic of China

-AAx

Bulgaria -26x Portuguese -13x

Czech -22x Romanian -27x

Danish -08x Russian -25x

Finnish -35x Saudi Arabia -DEx

French -05x Slovakian -23x

French Canadian -12x South Korea -KDx

German -04x Spanish -07x

Greek -15x Swedish -10x

Hebrew -BBx Swiss -11x

Hungarian -21x Taiwanese -ABx

International -37x Thai -28x

International English -L3x Turkish -14x

Italian -06x U.S. -00x

Japanese -29x U.K. -03x

Standard and Optional Boards

System board (includes replacement thermal material)

* System board for use in models without Windows 8 696970-001

* System board for use in models with Windows 8 Standard 696970-501

* System board for use in models with Windows 8 Professional 696970-601

* System board for use in models with NetClone 727721-001

Optional boards

* AMD Radeon HD 7650A 2GB MXM Graphics 708866-001

* HP WLAN 802.11 a/b/g/n 2x2 PCIe NIC 695915-001

Memory modules (PC3-12800, CL11, SODIMM)

*8 GB 689374-001

*4 GB 689373-001

*2 GB 689372-001

Intel Core i7 processors (include thermal material)

* 4770s, 3.1 GHz, 8-MB L3 cache 732507-001

Intel Core i5 processors (include thermal material)

* 4670s, 3.1 GHz, 6-MB L3 cache 732506-001

* 4570s, 2.9 GHz, 6-MB L3 cache 732505-001

* Not shown

HP EliteDesk 800 G1, USDT Chassis 723287-001 page 2

Password Security

Establishing a Setup or Power-On password:

1. Turn on or restart the computer.

2. As soon as the computer turns on, press the Esc key while “Press the ESC key for Startup

Menu” message is displayed at the bottom of the screen.

3. Press the F10 key to enter Computer Setup.

4. To establish Setup password, select Security > Setup Password and follow the instructions.

- or -

To establish a Power-On password, select Security > Power-On Password and follow the

instructions on the screen

5. Before exiting, click File > Save Changes and Exit.

Changing a Setup or Power-On password:

1. Turn on or restart the computer.

To change the Setup password, go to step 2.

To change the Power-on password, go to step 3.

2. To change the Setup password, as soon as the computer turns on:

- Press the Esc key while “Press the ESC key for Startup Menu” message is displayed.

- Press the F10 key to enter Computer Setup.

3. When the key icon appears, type your current password, a slash (/) or alternate delimiter

character, your new password, another slash (/) or alternate delimiter character, and your

new password again as shown:

current password/new password/new password.

NOTE: Type the new password carefully since the characters do not appear on the screen.

4. Press Enter.

The new password will take effect the next time the computer is restarted.

Deleting a Power-On or Setup password

1. Turn on or restart the computer.

To delete the Setup password, go to step 2.

To delete the Power-On password, go to step 3.

2. To change the Setup password, as soon as the computer turns on:

- Press the Esc key while “Press the ESC key for Startup Menu” message is displayed.

- Press the F10 key to enter Computer Setup.

3. When the key icon appears, type your current password followed by a slash (/) or alternate

delimiter character as shown. Example: currentpassword/

4. Press Enter.

Clearing CMOS

1. Turn off the computer and disconnect the power cord from the power outlet.

2. Remove the access panel.

3. On the system board, press and hold the CMOS button for 5 seconds.

4. Replace the chassis access panel and reconnect the power cord.

5. Turn on the computer and allow it to start.

Miscellaneous Parts

1 Heat sink for use with the processor (includes thermal material) 587456-001

* Heat sink for use on models with discrete graphics cards (includes ther-

mal material)

689369-001

2 Power switch assembly 732767-001

3 Internal speaker 689384-001

4 Rear port cover 588981-001

5 Chassis fan, rear 732766-001

6 Front I/O panel 732762-001

7 Chassis fan, front 732765-001

* Solenoid lock 732772-001

* HP Ultraslim Keyed Cable Lock 703372-001

* Optical drive rail (green plastic piece on drive) 732761-001

* Hood sensor 638816-001

* USB powered speakers 636917-001

* Mouse, PS2, optical 674315-001

* Mouse, USB, HP Elite 674318-001

* Mouse, washable 724795-001

* Mouse, wireless, HP Elite 674317-001

* Mouse, USB, optical 674316-001

*Not shown

Mass Storage Devices (not illustrated)

DVD-ROM drive 608394-001

DVD±RW drive 657958-001

Blu-ray BD-RW SuperMulti XL Drive 719157-001

750 GB, 7200 rpm hard drive, hybrid SSD 719105-001

500 GB, hard drive, hybrid SSD 724938-001

500 GB, 10000 rpm hard drive 683923-001

500 GB, 7200 rpm, self-encrypting (SED) hard drive 696442-001

500 GB, 7200 rpm, Advanced Format hard drive 686217-001

500 GB, 7200 rpm hard drive 613208-001

320 GB, 7200 rpm hard drive 639135-001

256 GB Solid State Drive (SSD), self-encrypting (SED) 680020-001

128 GB Solid State Drive (SSD) 665961-001

32 GB mSATA drive 719566-001

Common POST Error Messages

Screen Message Probable Cause Recommended Action

101-Option ROM Error 1. System ROM checksum

error.

2. Expansion board option

ROM checksum

1. Verify ROM, reflash if required

2. Remove suspected card,

reboot

3. Clear CMOS memory, reboot

4. Replace system board

103-System Board

Failure

DMA, timers 1. Clear CMOS memory.

2. Remove expansion boards.

3. Replace system board.

164-Memory Size Error

and

201-Memory Error

Incorrect memory configu-

ration

1. Run Setup (F10).

2. Check DIMMs for proper

seating, type, and HP

compatibility.

3. Remove DIMMs singularly and

reboot to isolate faulty DIMM.

4. Replace system board.

214-DIMM Configuration

Warning

Populated DIMM configura-

tion is not optimized

Rearrange the DIMMs so that

each channel has the same

amount of memory.

301-, 304-Keyboard

error

Keyboard failure. Check keyboard connection or

keys. Check connector for bent of

missing pins. Replace keyboard. If

304, possible system board prob-

lem.

501-Display Adapter Fail-

ure

Graphics display controller. 1. Reseat graphics card.

2. Clear CMOS.

3. Check monitor connection.

4. Replace graphics card.

1720-SMART Hard Drive

Detects Imminent Failure

Hard drive is about to fail.

1. Determine if hard drive is giving

correct error message. Enter

Computer Setup and run the

Drive Protection System test

under

Storage > DPS Self-test

.

2. Apply hard drive firmware

patch if applicable.

3. Back up contents and replace

hard drive.

HP EliteDesk 800 G1, USDT Chassis 723287-001 page 3

System Setup and Boot

Access the Setup Utility during computer boot by pressing the F10 key. If you do not press F10

at the appropriate time, you must restart the computer and again press F10 when the monitor

light turns green. NOTE: Not all settings are available for all models.

Computer Setup Menu

Heading Option/Description

File System Information - Lists the following main system specifications:

• Product name

• SKU number (some models)

• Processor type/speed/stepping

•Cache size (L1/L2/L3)

• Installed memory size/speed/ch

• Integrated MAC Address

•System BIOS

• Chassis serial number

• Asset tracking number

•ME firmware version

• ME management mode

About - Displays copyright notice.

Set Time and Date - Allows you to set system time and date.

Replicated Setup - Allows you to save or restore system configuration to/from

a USB flash drive.

Default Setup - Allows you to save current settings as default or restore fac-

tory settings as default.

Apply Defaults and Exit - Applies the selected default settings and clears any

established passwords.

Ignore Changes and Exit - Exits Computer setup without saving changes.

Save Changes and Exit - Saves changes to system configuration or default set-

tings and exits Computer Setup.

Storage Device Configuration - Lists all installed BIOS-controlled storage devices. The

following options are available:

•CD-ROM

•Hard Disk

• Default Values

• Translation Mode

•SSD Life Used

•SMART (ATA disks only)

•Diskette

•SATA Defaults

Storage Options - Allows you to set:

• eSATA Port - Set SATA port as eSATA port for use with external drive.

• SATA Emulation - Choose how the SATA controller and devices are accessed

by the OS. SATA Emulation choices are AHCI, RAID, or IDE.

• Removable Media Boot - Enables/disables ability to boot the system from

removable media.

• Max eSATA Speed - Allows you to choose 1.5 Gbps or 3.0 Gpbs as the max-

imum eSATA speed. By default, the speed is limited to 1.5 Gbps for maxi-

mum reliability.

DPS Self-Test - Execute self-tests on ATA hard drives capable of performing

the Drive Protection System (DPS) self-tests.

Boot Order - Specify boot order for UEFI and legacy boot sources. Also specify

hard drive boot order.

• Shortcut to Temporarily Override Boot Order

Security

Setup Password - Set and enable the setup (Admin) password.

Power-On Password - Set and enable power-on password.

Password Options - Allows to you enable/disable:

•Lock Legacy Resources

• Setup Browse Mode

• Password prompt on F9 & F12

• Network Server Mode

Smart Cover - Allows you to lock/unlock the smart cover and set the cover

removal sensor to disable/notify user/setup password.

Device Security - Set Device Available/Device Hidden for: embedded security device,

system audio, network controller, USB controller, serial/parallel ports, and SATA

ports.

USB Security - Set Device Available/Device Hidden for front USB ports, rear USB

ports, internal USB ports, accessory USB ports.

Slot Security - Disable the PCI, PCIe, and Mini Card slots.

Network Boot - Enables/disables boot from OS (NIC models only).

System IDs - Allows you to update asset tag, ownership tag, UUID, keyboard

locale setting.

Master Boot Record Security - enables/disables MBR.

System Security - Allows you to set:

• Data Execution Prevention (enable/disable)

• SVM CPU Virtualization (enable/disable).

• Virtualization Technology (VTx) (enable/disable)

• Virtualization Technology/Directed IO (VTd) (enable/disable)

• Trusted Execution Technology (enable/disable)

• Embedded Security Device (enable/disable)

• Reset to Factory Settings (Do not reset/Reset)

• Measure boot variables/devices to PCR1 (enable/disable)

• OS management of Embedded Security Device (enable/disable)

• Reset of Embedded Security Device through OS (enable/disable)

• No PPI provisioning (Windows 8 only; enable/disable)

• Allow PPI policy to be changed by OS (enable/disable)

DriveLock Security - Allows you to assign or modify a master or user password

for hard drives.

Secure Boot Configuration (Windows 8 only)

• Legacy Support (enable/disable)

• Secure Boot (enable/disable).

• Key Management (enable/disable)

• Fast Boot (enable/disable)

Power OS Power Management - Allows you to enable/disable Runtime Power Man-

agement, Idle Power Savings, Unique Sleep State Blink Rates.

Hardware Power Management - Enable/disable SATA power management, S5 maxi-

mum power savings., PCI slots, network controller, USB 3.0 controller

Thermal - Control minimum fan speed.

Advanced Power-On Options - Allows you to set:

• POST mode (QuickBoot, Clear Memory, FullBoot, or FullBoot Every x Days)

• POST messages (enable/disable)

• Press the ESC key for Startup Menu (enable/disable)

• Option ROM Prompt (enable/disable)

• After Power Loss (off/on/previous state)

• POST Delay (none, 5, 10, 15, 20, or 60 seconds)

• Remote Wakeup Boot Source (remote server/local hard drive)

• Factory Recovery Boot Support (enable/disable)

• Bypass F1 Prompt on Configuration Changes (enable/disable)

BIOS Power-On - Set the computer to turn on at a preset time.

Advanced

(

continued

)

Bus Options - Allows you to enable/disable PCI SERR# Generation and PCI VGA

palette snooping.

Onboard Devices - Allows you to set resources for or disable on-board system

devices.

Device Options - Allows you to set:

• Printer mode (Bi-Directional, EPP + ECP, Output Only)

• Num Lock State at Power-on (off/on)

• Integrated Video (enable/disable)

• Integrated Graphics (Auto/Disable/Force)

• Internal Speaker (enable/disable)

• NIC PXE Option ROM Download (enable/disable)

• SATA RAID Option ROM Download (enable/disable)

• Multi-Processor (enable/disable)

• Hyper-threading (enable/disable)

• Turbo Mode (enable/disable)

VGA Configuration - Allows you to specify which VGA controller is the “boot”/

primary. Displayed only if add-in video card installed.

AMT Configuration - Allows you to set:

• AMT (enable/disable)

• Unconfigure AMT/ME (enable/disable)

• Hide Unconfigure ME Confirmation Prompt (enable/disable)

• Watchdog Timer (enable/disable)

Diagnostic LEDs

LED Color LED Activity State/Message

Power White On Computer on

Power White 1 blink every 2 seconds Normal Suspend Mode

Power Red 1 blink every second followed

by a 2 second pause

CPU thermal shutdown

Power Red 3 blinks, 1 blink every second

followed by a 2 second pause

Processor not installed

Power Red 4 blinks, 1 blink every second

followed by a 2 second pause

Power failure (power supply overload)

Power Red 5 blinks, 1 blink every second

followed by a 2 second pause

Pre-video memory error

Power Red 6 blinks, 1 blink every second

followed by a 2 second pause

Pre-video graphics error

Power Red 7 blinks, 1 blink every second

followed by a 2 second pause

System board failure (ROM

Power Red 8 blinks, 1 blink every second

followed by a 2 second pause

Invalid ROM based on Checksum

Power Red 9 blinks, 1 blink every second

followed by a 2 second pause

System powers on but is unable to

boot

Power Red 10 blinks, 1 blink every second

followed by a 2 second pause

Bad option card

Power Red 11 blinks, 1 blink every second

followed by a 2 second pause

Current processor does not support a

feature previously enabled.

none none System does not power on and

LEDs are not flashing

System unable to power on

HP EliteDesk 800 G1, USDT Chassis 723287-001 page 4

System Board

System Board Connectors and Jumpers (component location may vary)

PWR DC power connector MIC

Microphone connector

VGA Video connector USB3

USB 3.0 ports

PS2

PS/2 mouse/kybd connectors

USB2

USB 2.0 ports

DISPLAYPORT DisplayPort connector SATA0

Hard drive connector

USB

USB connectors (4)

PB/LED

Power button connector

RJ45/USB

Ntwrk connector/USB ports

SPKR Speaker connector

IN/OUT Headphone/microphone CHFAN Front fan connector

CHFAN2 Fan connector mSATA Mini-SATA

BAT RTC battery socket

XU1

Processor socket

SATA PWR1 Optical drive power connector CMOS CMOS button

MXM Graphics card connector DIMM3 SODIMM 3

HSENSE

Hood sensor connector

DIMM1 SODIMM 1

MEDIA 3.0 SD Media Card Reader PSWD Password header

X1PCIEXP1 Mini PCI Express x1 SATA3 Optical drive

HDDLED Hard drive activity LED HLOCK

Hood lock connector

HDPH

Headphone connector