Hp Integrity Server Rx4640 Users Manual A6961 96013

2015-02-09

• HP Integrity rx4640 Server User Service Guide
• Table of Contents
• List of Tables
• List of Figures
• About This Document
  • Intended Audience
  • New and Changed Information in This Edition
  • Publishing History
  • Document Organization
  • Typographic Conventions
  • HP-UX Release Name and Release Identifier
  • Related Documents
  • HP Encourages Your Comments
• 1 Introduction
  • Server Overview
  • Server Dimensions and Weight
  • Server Components
    • Processors
    • Memory
    • PCI Riser
    • Internal Core I/O
    • External Core I/O
    • Power Supply Unit
    • Motherboard Manageability
    • Enhanced Server Manageability Using Management Processor
    • Hard Disk Drives
  • Supported Operating Systems
• 2 Controls, Ports, and LEDs
  • Front Panel Controls, Ports, and LEDs
    • Hard Disk Drive LED Indicators
    • DVD/DVD-R/DVD-RW Drives
  • Rear Panel Controls, Ports, and LEDs
    • Power Supply Status LEDs
    • Management Processor LAN LEDs
    • Locator LED and Button
    • Gigabit Ethernet Card LAN Ports (Core I/O)
  • Internal Controls, Ports, and LEDs
    • QuickFind Diagnostic Panel
    • I/O Baseboard LED Indicators
• 3 Powering Off and Powering On the Server
  • power:states
  • Powering Off the Server
    • Powering Off the Server Using the iLO MP
    • Powering Off the Server Manually
  • Powering On the Server
    • Powering On the Server Using the iLO MP
    • Powering On the Server Manually
• 4 Removing and Replacing Components
  • Safety Information
  • Service Tools Required
  • Accessing a Rack Mounted Server
    • Extending the Server from the Rack
    • Inserting the Server into the Rack
  • Accessing a Pedestal Mounted Server
  • Removing and Replacing the Front Bezel
    • Removing the Front Bezel
    • Replacing the Front Bezel
  • Removing and Replacing the Front and Top Covers
    • Removing the Front Cover
    • Replacing the Front Cover
    • Removing the Top Cover
    • Replacing the Top Cover
  • Removing and Replacing the Memory Extender Board
    • Removing the Memory Extender Board
    • Replacing the Memory Extender Board
  • Removing and Replacing Server Memory DIMMs
    • Removing Server Memory DIMMs
    • Installing Memory DIMMs
    • 16 DIMM Memory Extender Board Layout
    • 32 DIMM Memory Extender Board Layout
  • Removing and Replacing the Processor Extender Board
    • Removing the Processor Extender Board
    • Replacing the Processor Extender Board
  • Removing and Replacing a Processor
    • Processor Load Order
    • Removing a Processor
    • Replacing a Processor
  • Removing and Replacing Hot-Swap Chassis Fans
    • Removing a Hot-Swap Chassis Fan Unit
    • Replacing a Hot-Swap Chassis Fan Unit
  • Removing and Replacing the I/O Baseboard
    • Removing the I/O Baseboard
    • Replacing the I/O Baseboard
  • Removing and Replacing Hot-Plug PCI-X Cards
    • PCI-X Specifications
    • Operating System Support for Hot-Plug PCI-X Operations
    • PCI-X Hardware and Software Interfaces
    • PCI-X Slot Locations and Configurations
    • Hot-Plug Operation Procedures
  • Removing and Replacing OLX Dividers
    • Removing an OLX Divider
    • Replacing an OLX Divider
  • Removing and Replacing Core I/O Cards
    • PCI Slot Locations and Configurations
    • Removing and Replacing the SCSI Core I/O Card
    • Removing and Replacing the LAN Core I/O Card
  • Removing and Replacing the Server Battery
  • Removing and Replacing Hard Disk Drives
    • Removing a Hard Disk Drive
    • Replacing a Hard Disk Drive
  • Removing and Replacing the SCSI Backplane Board
    • Removing the SCSI Backplane Board
    • Replacing the SCSI Backplane Board
  • Removing and Replacing the Midplane Riser Board
    • Removing the Midplane Riser Board
    • Replacing the Midplane Riser Board
  • Removing and Replacing the Power Supplies
    • Power Supply Load Order
    • Removing a Hot-Swap Power Supply
    • Replacing a Hot-Swap Power Supply
  • Removing and Replacing the Power Distribution Board
    • Removing the Power Distribution Board
    • Replacing the Power Distribution Board
  • Removing and Replacing the DVD Drive
    • Removing the DVD Drive
    • Replacing the DVD Drive
  • Removing and Replacing the DVD I/O Board
    • Removing the DVD I/O Board
    • Replacing the DVD I/O Board
  • Removing and Replacing the Display Board
    • Removing the Display Board
    • Replacing the Display Board
  • Removing and Replacing the QuickFind Diagnostic Board
    • Removing the QuickFind Diagnostic Board
    • Replacing the QuickFind Diagnostic Board
• 5 Troubleshooting
  • Troubleshooting Tips
    • Troubleshooting Methodology
  • Possible Problems
    • The Server Does Not Power On
    • The Server Does Not Boot
    • The Server Has Intermittent Failures
    • The Server LED or Diagnostic LEDs Are Not On and No Error Messages Appear
    • Power Shuts Off and Does Not Come Back On
  • Troubleshooting Using LED Indicators
    • Front Control Panel LED Indicators
    • Hard Disk Drive LED Indicators
    • DVD/DVD-R/DVD-RW Drive LED Indicators
    • QuickFind Diagnostic Panel LED Indicators
    • I/O Baseboard LED Indicators
    • Power Supply Status LED Indicators
    • iLO MP LAN Port Link/Activity LED Display
    • Locator LED and Button
    • PCI-X LEDs and Hardware Errors
  • Diagnostics
    • Online Diagnostics/Exercisers
    • Offline Support Tool Availability
    • Offline Support Tools List
    • General Diagnostic Tools
    • Fault Management Overview
    • HP-UX Fault Management
  • Recommended Cleaning Procedures
  • Where to Get Help
    • Information to Collect Before you Contact Support
    • Online Support
    • Phone Support
• A Parts Information
  • Field Replaceable Parts List
• B Booting the Operating System
  • Operating Systems Supported on HP Integrity Servers
  • Configuring System Boot Options
  • Booting and Shutting Down HP-UX
    • Adding HP-UX to the Boot Options List
    • Standard HP-UX Booting
    • Single-User Mode HP-UX Booting
    • LVM Maintenance Mode HP-UX Booting
    • Shutting Down HP-UX
  • Booting and Shutting Down HP OpenVMS
    • Adding HP OpenVMS to the Boot Options List
    • Booting HP OpenVMS
    • Shutting Down HP OpenVMS
  • Booting and Shutting Down Microsoft Windows
    • Adding Microsoft Windows to the Boot Options List
    • Booting the Microsoft Windows Operating System
    • Shutting Down Microsoft Windows
  • Booting and Shutting Down Linux
    • Adding Linux to the Boot Options List
    • Booting the Red Hat Enterprise Linux Operating System
    • Booting the SuSE Linux Enterprise Server Operating System
    • Shutting Down Linux
• C Utilities
  • Extensible Firmware Interface Boot Manager
    • EFI Commands
  • EFI/POSSE Commands
    • help
    • baud
    • boottest
    • cpuconfig
    • ioconfig
    • default
    • errdump
    • info
    • lanaddress
    • monarch
    • pdt
    • sysmode
  • Specifying SCSI Parameters
    • Using the SCSI Setup Utility
  • Using the Boot Configuration Menu
    • Boot From File
    • Add Boot Entry
    • Edit Boot Entry
    • Remove Boot Entry
    • BootNext Configuration
    • AutoBoot Configuration
    • Driver Configuration
    • Driver Configuration
    • Console Configuration
    • System Reset
    • Using the System Configuration Menu
    • Using the Security Configuration Menu
• Index