Hp Hsr6600 Router Series Installation Manual

2015-01-05

• Title Page
• Contents
• Preparing for installation
  • Safety recommendations
    • Safety symbols
    • General safety recommendations
    • Electricity
    • Laser safety
    • Router moving
  • Examining the installation site
    • Weight support
    • Temperature and humidity
    • Altitude
    • Cleanness
    • Cooling system
    • ESD prevention
    • EMI
    • Lightning protection
    • Space
    • Power supply
  • Accessories
• Installing the router
  • Installation flow
  • Check before installation
  • Unpacking the router
  • Installing the router in a 19-inch rack
  • Grounding the router
    • Installing the ring terminal
    • Connecting the grounding cable
  • Installing a power module
  • Installing a FIP module
  • Installing a HIM/MIM
  • Installing a CF card
  • Connecting the power cord
    • Connecting an AC power cord
    • Connecting a DC power cord
• Connecting the router to the network
  • Connecting the AUX cable
    • Overview
    • Connecting the AUX cable
  • Connecting an Ethernet cable
    • Overview
    • Making an Ethernet cable
    • Connecting an Ethernet cable
  • Connecting a fiber cable
    • Transceiver module overview
    • Fiber cable overview
    • Connecting a fiber cable
  • Connecting an E1/T1 cable
    • E1/T1 cable overview
      • E1 cable
      • T1 cable
    • Connecting an E1/T1 cable
      • Connecting an E1 cable (D15/D68 <----> BNC)
      • Connecting a T1 cable
  • Connecting a CE3/CT3 cable
    • CE3/CT3 cable overview
    • Connecting a CE3/CT3 cable
  • Connecting a serial port cable
    • Overview
    • Connecting a serial port cable
• Logging in to the router and configuring basic settings
  • Login methods
  • Logging in through the console port
    • Preparation
    • Setting up a configuration environment
    • Setting terminal parameters
    • Verification before power-on
    • Powering on the router
  • Logging in to the router through Telnet/SSH
  • Logging in to the router through the AUX port
  • Displaying the initial configuration
  • Configuring basic settings
• Replacement procedures
  • Safety recommendations
  • Replacing a power module
  • Replacing a FIP module
  • Replacing a HIM/MIM
  • Replacing a CF card
  • Replacing a transceiver module
  • Replacing a fan tray
  • Replacing a memory module
    • Memory module structure
    • When to replace a memory module
    • Replacing a memory module
      • Opening the chassis cover
      • Replacing a memory module
• Hardware management and maintenance
  • Displaying hardware information of the router
    • Displaying the software and hardware version information of the router
    • Displaying the operational statistics of the router
    • Displaying the detailed information about a module
    • Displaying the electrical label information of a module
    • Displaying the CPU usage of a module
    • Displaying the memory usage of a module
    • Displaying the CF card information
    • Displaying the operational status of the built-in fan
    • Displaying the operational status of power modules
  • Displaying the alarming thresholds of a module
  • Configuring a combo interface
    • Combo interface overview
    • Configuration prerequisites
    • Configuring a combo interface
  • Displaying transceiver module information and alarming information
    • Introduction to transceiver modules
    • Displaying transceiver module information
    • Displaying the alarming information or fault detection parameters for a transceiver module
  • Solving system faults
    • Solving system faults
    • Viewing the system fault solving method
  • Saving the current configuration of the router
  • Rebooting the router
• Troubleshooting
  • Router failures
    • Power status LEDs are off
    • RUN LED is off
    • RUN LED fast flashes
    • ALM LED is steady on or flashes
  • FIP module failure
  • Power module failures
  • Fan failures
    • Fan tray is absent
    • ALM LED is red
  • HIM/MIM failures
  • Configuration system problems
    • No terminal display
    • Garbled terminal display
    • No response from the serial port
  • Dealing with password loss
    • Examining the state of password recovery capability
    • Dealing with console login password loss when password recovery capability is enabled
    • Dealing with user privilege level password loss when password recovery capability is enabled
    • Dealing with password loss when password recovery capability is disabled
  • Cooling system failure
  • Interface module, cable, and connection failure
  • Software upgrade failures
    • No response from the serial port
    • TFTP upgrade failure
    • FTP upgrade failure
  • Application file missing errors
• Appendix A Chassis views and Technical specifications
  • Chassis views
  • Dimensions and weights
  • Storage media
  • Power consumption
  • Power module
    • AC power module
    • DC power module
  • Fan tray
  • Port specifications
    • Ports and slots
    • Console port
    • AUX port
    • Management Ethernet port
    • Combo interface
      • Copper Ethernet port
      • Fiber Ethernet port
    • 10 Gbps Ethernet port
  • Flexible interface platform modules
    • FIP-10
    • FIP-20
  • Interface modules
• Appendix B LEDs
  • Panel LEDs
    • HSR6602-G/HSR6602-G TAA panel LEDs
    • HSR6602-XG/HSR6602-XG TAA panel LEDs
  • FIP LEDs
  • HIM/MIM LEDs
  • Power module LEDs
• Appendix C Cable management
  • General cabling requirements
    • Minimum curvature radius of cables
    • Minimum curvature radius of fibers
  • Labeling cables
  • Cable management guidelines
  • Cable routing example
• Appendix D Arranging slots and numbering interfaces
  • Slot arrangement
  • Slot arrangement for FIPs
  • Numbering interfaces
  • Examples
    • Example 1
    • Example 2
• Support and other resources
  • Contacting HP
    • Subscription service
  • Related information
    • Documents
    • Websites
  • Conventions
    • Command conventions
    • GUI conventions
    • Symbols
    • Network topology icons
    • Port numbering in examples
• Index