Hp Integrity Nonstop Release And Migration Installation Upgrade Guide G06.24 Software
2015-03-28
: Hp Hp-Integrity-Nonstop-Release-And-Migration-Installation-And-Upgrade-Guide-669457 hp-integrity-nonstop-release-and-migration-installation-and-upgrade-guide-669457 hp pdf
Open the PDF directly: View PDF
Page Count: 320 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- G06.24 Software Installation and Upgrade Guide
- What’s New in This Manual
- About This Manual
- 1 Overview of Installing G06.24
- Disk Space Requirements
- System Console Requirements
- HP NonStop Server Software Requirements
- DSM/SCM and the G06.24 RVU
- Managing Microcode and Firmware
- Investigating a New RVU
- Installing a New RVU
- Falling Back to the Previous RVU
- Resecuring and Licensing Requirements
- G06.24 Installation and Fallback Alerts for Products
- 4619 Disk Drives
- 6780 ServerNet Switch (G06.21)
- Backup and Restore 2 (BR2) (G06.24)
- C++ (G06.20)
- DP2 (G06.16, G06.23, G06.24)
- Gigabit Ethernet ServerNet Adapter (G06.16)
- Minimum Memory Requirements (G06.16)
- NonStop Kernel (NSK) Utilities (T9070AAK) (G06.22, 23, 24)
- OSM Configuration and Fallback (G06.08 to G06.24)
- OSS (G06.12 through G06.24)
- NonStop SQL/MP
- NonStop SQL/MX Release 2.0 (G06.23 and G06.24)
- NonStop Processor Multifunction (PMF) CRUs (G06.08 through G06.24)
- Spooler (G06.00 through G06.19)
- SCF Storage Subsystem (Online Disk Remirroring) (G06.21)
- SWID (T9298D40^AAK) (G06.20)
- Tandem Failure Data System (TFDS)
- TNS/R CRE Heap Manager (G06.15)
- TSM Client and Server Software (G06.22, G06.23, G06.24)
- Service Processor (SP) Firmware (G06.08 through G06.24)
- SCF for Data Alignment (G06.17)
- System Configuration Database
- NonStop TCP/IPv6 (G06.20, G06.22, G06.23, G06.24)
- TMF (G06.23 and G06.24)
- TNOS Server and TNOS Utility (G06.17 through G06.24)
- Visual Inspect (G06.20)
- WAN Wizard Pro (G06.21, G06.22, G06.23, G06.24)
- X25AM
- 2 G06.24 Upgrade Checklists
- 3 Installing SPRs Before Upgrading to the G06.24 RVU
- 4 Preparing to Upgrade the Server Software
- Save the Current Configuration File (CONFxxyy)
- Upgrade the System Console Software
- Verify System Operations
- Check Processor Status (Using either TSM or OSM)
- Check System Enclosure Components (Using TSM)
- Check Critical System Processes
- Check the Status of the ServerNet Addressable Controllers (SACs)
- Check Disk Subsystem Status
- Check the Swap File Configuration
- Check the Status of the Spooler Collector
- Check the Tape Drive Status
- Record the Current SYSnn
- Back Up Important Files
- 5 Installing the G06.24 RVU
- 6 Replacing the Disk Bootstrap Microcode (Pre-G06.06)
- 7 Updating Service Processor (SP) Firmware
- Alerts
- Before You Begin
- Update SP Firmware Using the TSM Service Application
- Determining If a Problem Has Occurred
- Recovery for Problems Updating SP Firmware (Using TSM)
- Updating SP Firmware Using the OSM Service Connection
- Notes for Using OSM to Update SP Firmware
- Firmware Update for Fabric Side-Y (Using OSM)
- Firmware Update for Fabric Side-X (Using OSM)
- Verifying the SP Firmware Update (Using OSM)
- Correcting a Failed SP Firmware Update (Using the OSM Service Connection)
- Using OSM and Downloading the SP Firmware File to the System Console (Optional)
- Updating Firmware Using the OSM Low-Level Link Application (Optional)
- 8 Updating Processor Boot Code
- 9 Updating SCSI Boot Code (Pre-G06.08 RVU)
- 10 Running ZPHIRNM
- 11 Loading the G06.24 RVU
- 12 Resuming Normal Operations
- 13 Preparing to Fall Back
- 14 Backing Out the DSM/SCM Revision
- 15 Returning Firmware to Previous Versions
- Alerts
- Returning Processor Boot Code to the Previous Version (Using TSM)
- Returning SP Firmware to the Previous Version (Using TSM)
- Returning SCSI Boot Code to the Previous Version (Using TSM)
- Returning SP Firmware to the Previous Version (Using OSM)
- Returning Bootcode Firmware to the Previous Version (Using OSM)
- 16 Running ZPHIRNM to Reactivate the Previous Software Revision
- 17 Loading the Previous RVU and Resuming Normal Operations
- A Using DSM/SCM to Install SPRs
- B Installing the Latest DSM/SCM SPRs and Client Software
- Before You Begin Installing DSM/SCM and Client SPRs
- Before You Begin Installing the Software Identification (SWID) SPR
- Alerts
- Copy (RESTORE) the D46 DSM/SCM Product Version and SWID (Optional) to Disk
- Receive the D46 SPRs for DSM/SCM
- Create a New Software Revision for DSM/SCM D46 SPR and SWID
- Build and Apply the DSM/SCM D46 Software Revision
- Rename the Applied DSM/SCM D46 Files
- If Running INSTALL^TEMPLATES Is Required
- Restart Applications
- Recovery for Problems While Installing the D46 Version of DSM/SCM
- Install the DSM/SCM Client From ZDSMSCM
- C Updating SWAN Concentrator CLIP Firmware
- Using the SWAN Fast Firmware Update Guided Procedure (Recommended if Using TSM)
- Using the TSM Firmware Update Dialog Box to Update SWAN Firmware
- Alert
- Before Updating SWAN CLIP Firmware
- Summary of SWAN Concentrator CLIP Firmware Update Steps (Using TSM)
- Required for Upgrading From T7953AAG and Later Firmware Versions
- Step 1: Stop the SWAN Concentrator and CLIPs
- Step 2: Point SWAN Concentrators to the New Firmware Object Code File
- Step 3: Initiate the Firmware Update Using TSM
- Step 4: Start the SWAN Concentrator and CLIPs
- Step 5: Verify That the SWAN CLIPs Are Running the Latest Firmware
- Step 6: Start Stopped Lines (If Necessary)
- Using the OSM Multi-Resource Actions Dialog Box to Update SWAN and SWAN 2 Firmware
- Summary of Steps for Upgrading From T7953AAG and Later SWAN Firmware Versions (Using OSM)
- Step 1: Stop the SWAN Concentrator and CLIPs
- Step 2: Check the Location and Version of the SWAN Firmware
- Step 3: Initiate the Firmware Update
- Step 4: Start the SWAN Concentrator and CLIPs
- If a CLIP Fails to Update (Using OSM)
- Glossary
- Index