Hp Proliant Dl160 Users Manual Generation 5

DL160 to the manual dade5d02-8d30-4834-a30d-de6458dc0158

: Hp Hp-Proliant-Dl160-Users-Manual-545765 hp-proliant-dl160-users-manual-545765 hp pdf

Open the PDF directly: View PDF .
Page Count: 39

Download
Open PDF In Browser	View PDF

QuickSpecs

HP ProLiant DL160 Generation 5

Overview
Hot Plug SAS/SATA and Non-Hot Plug SATA Models

Front View:
1.
Access panel
2.
Quad-Core Intel® Xeon® 5400 series processors
(supports up to two)
3.
Eight PC2-5300 (DDR2-667) or PC2-6400 (DDR2-800)
fully buffered DIMM memory slots
4.
Power supply (650 Watts)
5.
6.
7.
8.

System fans
Optional CD-RW or DVD-ROM drive
Two USB ports
Power on/off & system LEDs

9.

Optional 3rd and 4th 3.5” Non-Hot plug SATA or hot plug
SAS/SATA hard drive bays
Standard 1st and 2nd 3.5” Non-Hot plug SATA or hot
plug SAS/SATA hard drive bays
Expansion Slots:
Non-Hot Plug Models – Two available x16 PCI-Express
Gen2 slots
Hot Plug Models – One available x16 PCI-Express slot
Gen2 slot

10.
11.

Rear View:
1.
Power Supply Cable Socket
2.
PS/2 Mouse Port
3.
PS/2 Keyboard Port
4.
Two GbE LAN ports for NIC 1 and NIC 2 (RJ-45)
5.
Rear USB ports
6.
LO100i 10/100 Mbps LAN port for IPMI management
(RJ-45)
7.
Video Port
8.
Serial Port
9.
Low-Profile PCI Express x8/PCI-X riser board slot cover
10. Standard height/full-height PCI Express x16/PCI-X riser
board

What's New
Support for up 400GB 3G 10K 3.5" DP SAS Enterprise Hard Drive

At A Glance
The HP ProLiant DL160 G5 server is an affordable 1U, dual processor capable server equipped with essential performance
features that provide customers with a platform to design a fully optimized solution. It is ideal for general purpose and high
performance computing.
Processors:
Supports up to two Intel® Quad-Core 5400 or Dual-Core 5200 sequence processors

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 1

QuickSpecs

HP ProLiant DL160 Generation 5

Overview
Quad-Core Intel® Xeon® processors 5400 sequence with 12 MB Level 2 cache
Dual-Core Intel® Xeon® processors 5200 sequence with 6 MB Level 2 cache
Intel® 5400 Chipset
Memory:
Supports up to 64 GB of PC2-5300 (DDR2-667) and up to 32 GB of PC2-6400 (DDR2-800) fully buffered DIMMs
(DDR2-667) with Advanced ECC
Internal Drive Support:
Support for up to four 3.5" Non-Hot plug serial ATA (SATA) hard drives or;
Support for up to four 3.5" Hot plug Serial Attached SCSI (SAS) or SATA hard drives.
NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard
Drives for Hot Plug models only.
Internal storage capacity of up to 1.0TB (4 x 1TB Hot Plug 3.5" SATA), 3.0TB (4 x 750 Non-Hot Plug SATA) or
4.0TB (4 x 1TB Hot Plug 3.5" SAS)
Network Controller:
Two embedded NC105i PCIe Gigabit Server Adapters
Storage Controllers:
Non-Hot Plug SATA Models: HP Embedded SATA RAID Controller
NOTE: Transfer rate: 1.5 Gb/s SATA
Hot Plug SAS/SATA Models: HP SC40Ge 4-Port Internal SAS HBA with RAID 0, 1
NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required.
NOTE: Transfer rate: 1.5 Gb/s SATA, 3Gb/s SAS
Expansion Slots:
Non-Hot Plug Models: Two available PCI Express 2.0 slots:
Slot 1: full-length/full-height PCI-Express 2.0 x16
Slot 2: low-profile/half-height PCI-Express 2.0 x16
Hot Plug Models: One available PCI-Express slot:
Slot 1: full-length/full-height PCI-Express 2.0 x16
Slot 2: low-profile/half-height PCI-X slot populated by the SAS/SATA storage controller
Management:
HP Lights Out 100i Advanced Remote Management with new licensed key activated upgrades for Virtual KVM
and virtual media support. LO100i management support for the DL160 G5 includes:
IPMI 2.0 & SMASH CLP support
ROM Setup Utility
Improvements to virtual media with the addition of USB 2.0 drives and protocol support for much faster transfer
speeds and DVD-ROM support plus simplified virtual media (floppy and CD with no FTTP server requirements)
Enhanced browser interface and embedded KVM over IP provides OS-independent remote graphical console
New Licenses that have EULAs with one-time, optional, license activation key to allow for easy, future upgrades
which will be chargeable when they become available.
USB Ports:
Five USB ports (two front, one internal, two rear)
Optical Drive:
Support for one (optional): DVD-ROM, DVD/CD RW
Power Supply:
650W Power Supply (Non-Hot Plug, Autoswitching)
Optional high-efficiency model
NOTE: Optional high-efficiency model requires the purchase of HP Power Supply Backplane (453652B21)
Additional Features:
Support for:
NVIDIA Quadro FX3700 512MB PCIe x 16 graphics card
NVIDIA Quadro FX1700 512MB PCIe x 16 graphics card
Form Factor:
Rack (1U)
Fixed mounting rails included with all models

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 2

QuickSpecs

HP ProLiant DL160 Generation 5

Overview
Deployment/Serviceability:
Tool-less access to all system components for easy in rack serviceability
Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow
for greater flexibility in performing defective parts replacement
Warranty:
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of
HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of
purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to
warranty services are available through HP Care Pack services or customized service agreements. SATA hard
drives have a one year warranty. SAS Midline drives have a one-year warranty. SAS Enterprise drives have a
three-year warranty.
NOTE: Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support with next business day
response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These
parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor
charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also
designed for easy replacement but may involve added complexity. Customers may choose to have HP replace
Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical
support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 3

QuickSpecs

HP ProLiant DL160 Generation 5

Standard Features
NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and
specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA1-6954ENW.pdf
NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information Factory Integrated Models" section.
Processor
Quad-Core Intel® Xeon® processor X5482 (3.20 GHz, 120W, 1600MHz FSB)
One of the following
NOTE: Available through Configure To Order only. See Factory Integration Models section for
depending on Model
more details.
Quad-Core Intel® Xeon® processor X5472 (3.00 GHz, 120W, 1600MHz FSB)
Quad-Core Intel® Xeon® processor X5470 (3.33 GHz, 120W, 1333MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for
more details.
Quad-Core Intel® Xeon® processor X5460 (3.16 GHz, 120W, 1333MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for
more details.
Quad-Core Intel® Xeon® processor L5430 (2.60 GHz, 50W, 1333MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for
more details.
Quad-Core Intel® Xeon® processor L5420 (2.50 GHz, 50W, 1333MHz FSB)
Quad-Core Intel® Xeon® processor L5410 (2.33 GHz, 50W, 1333MHz FSB)
Quad-Core Intel® Xeon® processor E5472 (3.00 GHz, 80W, 1600MHz FSB)
Quad-Core Intel® Xeon® processor E5462 (2.80 GHz, 80W, 1600MHz FSB)
Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 80W, 1333MHz FSB)
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80W, 1333MHz FSB)
Dual-Core Processors
Dual-Core Intel® Xeon® processor X5272 (3.40 GHz, 80W, 1600MHz FSB)
Dual-Core Intel® Xeon® processor L5240 (3.00 GHz, 40W, TDP, 1333MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for
more details.

Upgradeability

Upgradeable to two processors

Chipset

Intel® 5400 Chipset

Cache Memory

12 MB (2 x 6 MB) Level 2 cache (5400 sequence)
6 MB (1 x 6 MB) Level 2 cache (5200 sequence)

Memory Protection

Advanced ECC capabilities

Memory

Type
Standard
Maximum

PC2-5300 (DDR2-667) and PC2-6400 (DDR2-800)
1 GB
(2 x 512 MB)
32 GB
(8 x 4 GB) PC2-6400
64 GB
(8 x 8 GB)

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 4

QuickSpecs

HP ProLiant DL160 Generation 5

Standard Features
Network Controller

Expansion Slots #
1
1
2
2

Two embedded NC105i PCIe Gigabit Server Adapters

Technology Bus Width
PCI-Express
2.0
PCI-X***

x16

Connector
Width*
x16

Bus
Number*
1

64-bit

N/A

5

Device No.** Form Factor
0
1

Full length,
full height
Full length,
full height
Low Profile

Notes
3.3 volts
3.3 volts

PCI-Express
x16
x16
6
3
3.3 volts
2.0
PCI-X***
64-bit
N/A
5
1
Low Profile
3.3 volts
NOTE: All slots can accept universal keyed PCI cards
* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment
number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest
Device ID by bus (starting with the lowest bus).
*** PCI-X bus speed will be 133MHz when only one PCI-X card is installed. It will be 100MHz
when both slots have PCI-X cards installed.

Storage Controller

Non-Hot Plug SATA
Models

Storage

Optical Drives:
DVD-ROM
DVD/CD RW
Diskette Drives
Drive Bays:
Non-Hot Plug SATA
Hot Plug SATA/SAS

Maximum Internal
Storage

HP Embedded SATA RAID Controller (integrated into the south-bridge)
supporting SW RAID 0,1
NOTE: Transfer rate: 1.5 Gb/s SATA
Hot Plug SATA/SAS
HP SC40Ge HBA with RAID 0, 1
Models
NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA
Hard Drives are required.
NOTE: Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS
NOTE: A diskette drive, USB floppy drive key or virtual FDD using LO100 Advanced Pack is
needed to install storage controller drivers during a Windows operating system installation from a
CD.

Non-Hot Plug SATA
Hot Plug SATA
Hot Plug SAS

8x IDE (ATAPI) DVD-ROM drive, slim (optional)
24x IDE (ATAPI) CD-ROM drive (optional)
Via USB only
Up to 4 Non-hot plug SATA 3.5" drives
Up to 4 Hot plug SAS/SATA 3.5" drives

3.0TB
4.0TB
4.0TB

4 x 750GB
4 x 1TB
4 x 1TB

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 5

QuickSpecs

HP ProLiant DL160 Generation 5

Standard Features
Interfaces

Parallel
None
Network RJ-45(Ethernet) 2 10/100/1000 NIC ports (plus 1 dedicated for the HP ProLiant Lights
Out 100i Remote Management)
Serial
1
Pointing Device (Mouse) 1
Graphics
1
Keyboard
1
USB
5 (two front, one internal, two rear)
NOTE: Please see the following URL for additional information
regarding USB support:
http://h18004.www1.hp.com/products/servers/platforms/usbsupport.html.

Graphics

32MB shared supporting 1600x1200x16M resolution

Form Factor

Rack (1U), (1.75 in/4.45 cm)

Server Management Lights-Out 100i
Stand Alone Software
Product and ProLiant
Essentials

HP Lights-Out 100i Remote Management delivers affordable, entry level
remote management capabilities for HP ProLiant 100 Series servers
with embedded LO100i. It allows customers or their service providers to
remotely manage ProLiant 100 Series servers remotely over a LAN or
the Internet and consists of the following:
LO100i Standard is embedded remote management and provides
basic remote control via telnet, browser, and IPMI 2.0 and
SMASH
LO100i Advanced Pack License are upgrades for essential,
secure, remote control, serial console, virtual media, and Virtual
KVM (graphical hardware-based, remote console)

NOTE: Flexible and volume quantity (AKA) license kits are available for
the Lights-Out 100i Lights-Out 100 Advanced Pack licenses as well as
Electronic License To Use (E-LTU). AKA Tracking licenses require a
100 unit minimum forecast at initial contract signing. For these additional
part numbers, please refer to each software products' QuickSpecs at
this link for more information:
http://h18004.www1.hp.com/products/servers/management/
remotemgmt.html.
ProLiant Essentials
Rapid Deployment Pack (RDP) extends HP Systems Insight Manager
Rapid Deployment Pack with a complete deployment solution for HP ProLiant servers. RDP
provides a central location to configure server hardware, deploy
Windows, Linux and VMware ESX operating environments and install
using images and scripted profiles. For more information, visit:
http://www.hp.com/go/rdp.
NOTE: Flexible and volume quantity license kits are available for
ProLiant Essentials Value Packs. Refer to:
http://www.hp.com/servers/proliantessentials or the various ProLiant
Essentials Value Pack product QuickSpecs for more information.

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 6

QuickSpecs

HP ProLiant DL160 Generation 5

Standard Features

Core Infrastructure
Management

HP Systems Insight
Manager

HP Systems Insight Manager (HP SIM) provides a unified, secure and
extensible standards-based environment to centrally manage servers,
storage and other infrastructure devices, (both HP and non-HP) across
multiple operating system platforms.

Subscriber's Choice

Subscriber's Choice Driver and Support Alerts/Notifications is a webbased email subscription service that provides software and driver
change notifications for ProLiant products. Sign up at:
http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become
available, on a weekly or monthly basis.
The latest software, drivers, and firmware fully optimized and tested for
your ProLiant server and options, available through software and drivers
download pages website at: http://www.hp.com/go/support.

ROMPaq, software and
latest drivers

HP Serviceguard for
Linux (SG/LX)

HP Serviceguard for Linux is a high availability clustering solution designed to protect applications
and services from a wide variety of software and hardware failures, monitoring the health of each
server (node) and quickly responding to failures such as those that affect system processes,
system memory, LAN media and adapters, and application processes.
The following is a quick summary of HP Serviceguard for Linux features and support. For the most
recent list of Linux distributions & kernels, servers and storage supported with Serviceguard for
Linux, see the Serviceguard for Linux Datasheet, available at: http://www.hp.com/go/sglx/info.
Supported Linux Distributions:
Red Hat EL 4
Red Hat EL 5
SUSE SLES10
Supported Server Platforms
HP Integrity BladeSystem to Superdome
HP ProLiant BladeSystem p-Class & c-Class
HP ProLiant DL
HP ProLiant ML
IBM System x
Dell PowerEdge
Sun x64
Fujitsu Siemens PRIMERGY
Supported Virtual Machines
SG/LX in HP Integrity Virtual Machines guests
SG/LX in VMware ESX guests
SG/LX in Red Hat and SUSE Xen hosts (DOM0)
Application Integration Toolkits
HP Serviceguard for Linux Oracle Database Toolkit
HP Serviceguard Extension for SAP on Linux (SGeSAP/LX)
Free Application Integration Toolkits:
Apache
MySQL
NFS
PostgreSQL
Samba
Tomcat
Sendmail

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 7

QuickSpecs

HP ProLiant DL160 Generation 5

Standard Features
Disaster Tolerant Solutions
HP Serviceguard for Linux Extended Distance Cluster (XDC) extends cluster
distances up to 100 km, utilizes software RAID mirroring for data replication and is
storage array independent
HP StorageWorks XP/EVA Cluster Extension Software for Linux (CLX) works
seamlessly with HP Serviceguard for Linux, HP StorageWorks Continuous Access,
and HP Disk Arrays to automate failover and failback between sites
Software updates are distributed by HP Services to customers with support contracts
NOTE: For additional information on HP Serviceguard for Linux, visit: http://www.hp.com/go/sglx
or see the HP Serviceguard for Linux QuickSpecs.
NOTE: HP Serviceguard for Linux products for HP ProLiant and select 3rd party x86 class servers
include one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid
access to HP support staff and proactive delivery of software updates. For more information about
this service, please visit: http://www.hp.com/services/swsupport.

Industry Standard
Compliance

ACPI V2.0 Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
IPMI 2.0, SMASH CLP compliant

Manageability

HP Lights-Out 100i Standard provides the following OS-independent remote control capabilities:
Virtual power
System event log access
System health
Remote serial console (serial redirection)
Browser, Telnet access
SMASH-CLP compliant
IPMI 2.0 compliant
HP Lights-Out 100i Advanced Pack provides license key activated upgrades to the following:
Virtual KVM (KVM over IP functionality embedded on the system board)

Security

Power-on password
Setup password

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 8

QuickSpecs

HP ProLiant DL160 Generation 5

Standard Features
Server Power Cords

One 6' Highline (IEC-IEC) power cord ships standard
NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002)
that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are
primarily connected to PDU's in data center racks so they now ship standard with only a PDU
power cord (416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle
(NEMA-15), the NEMA power cord (227099-001) must be ordered separately.
If customers require a local power cord, they can check the power cord matrix for the appropriate
cord. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix.

UPS and PDU Power
Cord Matrix

Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and
specifications for UPS and PDU units:
http://h18004.www1.hp.com/products/servers/proliantstorage/power-protection/index.html.

Power Supply

650 Watts, auto-switching, PFC (Power Factor Correcting)
NOTE: Factory upgradeable to high-efficiency (HE) power supply for lower TCO

System Fans

6 system fans ship standard; Non-hot plug, Non-redundant

OS Support

Microsoft Windows Server 2003 R2
Microsoft Windows Server 2008
Microsoft Windows Small Business Server 2008
Microsoft Windows Essential Server 2008
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
Sun Solaris for x64/x86-based Systems
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, please visit
our Support Matrix at: http://www.hp.com/go/supportos and our driver download page
http://www.hp.com/support/DL160G5.

Rack Airflow
Requirements

Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for
maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow
5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate
airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must
be a minimum of 7 cm (2.75 inches)
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack.
This arrangement ensures proper airflow. Using a rack without blanking panels results in improper
cooling that can lead to thermal damage.

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 9

QuickSpecs

HP ProLiant DL160 Generation 5

Standard Features
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation
CD provided with the server, or to the server documentation located in the Support section at the
following URL: www.hp.com/servers/dl160.

Rack Support

The DL Fixed Rail System supports installation in racks with square or round mounting holes
(including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 24" - 36".
Installation into Telco 2 post, and 4 post, or threaded holes racks requires a 3rd party option kit.
For additional information, please visit: www.racksolutions.com.

Factory Express
Portfolio for Servers
and Storage

HP Factory Express offers configuration, customization, integration and deployment services for
HP servers and storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading,
asset tagging, and custom packaging. HP products supported through Factory Express include a
wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP
BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries
and configurable network switches.
For more information on Factory Express services for your specific server model please contact
your sales representative or go to: http://www.hp.com/go/factory-express.

HP Enterprise
Configurator

The HP eConfigure Enterprise Configurator now provides factory default racking for our HP
hardware portfolio. This approach is aligned with our strategic direction to meet the needs and
expectations of our valued customers. If you require "custom" rack configuration, please contact
HP's Customer Business Center or an Authorized Partner for assistance.

Service and Support

HP Care Pack Services provide total care and support expertise with committed response
designed to meet your IT and business needs.
HP Care Pack Services provide total care and support expertise with committed response
designed to meet your IT and business needs.
HP Care Pack services include coverage for the HP branded hardware options qualified for the
server that are purchased at the same time or afterward and internal to the enclosure. It also
includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items
will be covered at the same service level and for the same coverage period as the server.
Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For
servers or storage systems installed within a rack, service also covers all HP qualified rack
options installed within the same rack.
To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who
thoroughly understands your server technology and systems environment. HP Services, an
industry leader in provision of multi vender support solutions provides a range of support services
designed to meet the varying needs of business. Whether an SMB or large global corporation HP
has a ProLiant server support offer to help you speedily deploy and maximize system uptime.
Recommended Service – Simplify ProLiant solution implementation, maintenance and
management.

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 10

QuickSpecs

HP ProLiant DL160 Generation 5

Standard Features
Support Service – 3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
Deployment Service – Hardware Installation only
Enhanced Service – Optimize service level to increase IT performance and availability
Support Service – 3 Year 13x5 Same Business Day, 4-Hour response coverage
Deployment Service – Installation and Start-up only
Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer
Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP
holidays.
For a complete listing of service offerings and information visit:
http://www.hp.com/services/proliantservices
http://www.hp.com/go/proliant/carepack

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 11

QuickSpecs

HP ProLiant DL160 Generation 5

HPC Interconnects
NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL160 G5 under the Cluster
Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure
to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the
following URL to configure HPC Clusters with InfiniBand, Gigabit Ethernet or Myrinet Interconnects:
http://www.hp.com/techservers/clusters/ucp/index.html

HPC Interconnects

InfiniBand
Gigabit Ethernet
Myrinet XP

PCI-X and PCI-Express adapters
Use embedded ports
PCI-X Rev D, Rev E and Rev F adapters

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 12

QuickSpecs

HP ProLiant DL160 Generation 5

Models

Non-Hot Plug Serial ATA (SATA) Models
NOTE: Non-Hot Plug models are not upgradeable to Hot Plug. Non-Hot Plug models require the addition of the HP HBA
SAS-SATA 4x1LN Cable Kit (P/N: 452130-B21) in order to connect a hardware RAID controller.
HP DL160 G5 X5472
Processor(s)
(1) Quad-Core Intel® Xeon® processor X5472 (3.00 GHz, 120W, 1600
Non-Hot Plug SATA,
One of the following
MHz FSB)
2GB, (1P)
depending on model
(1) Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 80W,
445198-xx1
1333MHz FSB)
(1) Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80W,
HP DL160 G5 E5430
1333MHz FSB)
Non-Hot Plug SATA,
Cache Memory
12MB (2 x 6MB) Level 2 cache
1GB, (1P)
Memory
2GB (2 x 1GB) PC2-5300 DDR2 fully buffered DIMMs (667MHz) with
445197-xx1
One of the following
Advanced ECC (X5472 models)
depending
on
model
1GB (2 x 512MB) PC2-5300 DDR2 fully buffered DIMMs (667MHz) with
HP DL160 G5 E5405
Advanced ECC (E5430, E5405 models)
Non-Hot Plug SATA,
1GB, (1P)
Network Controller
Two embedded NC105i PCIe Gigabit Server Adapters
445196-xx1
Storage Controller
HP Embedded SATA RAID Controller
Hard Drive
160GB NHP SATA HDD
Internal Storage
3.0TB maximum (4 x 750GB Non-Hot plug 3.5" SATA hard drives)
Optical Drive
Optional CD/DVD-ROM, DVD/CD RW
Form Factor
Rack (1U)

Hot Plug Serial ATA (SATA)/ Serial Attached SCSI (SAS) Models
HP DL160 G5 X5472
Hot Plug SAS/SATA,
2GB, (1P)
445204-xx1
HP DL160 G5 E5430
Hot Plug SAS/SATA,
1GB, (1P)
445203-xx1
HP DL160 G5 E5405
Hot Plug SAS/SATA
1GB, (1P)
445202-xx1

Processor(s)
One of the following
depending on model

Cache Memory
Memory
One of the following
depending on model
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Form Factor

(1) Quad-Core Intel® Xeon® processor X5472 (3.00 GHz, 120W, 1600
MHz FSB)
(1) Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 80W,
1333MHz FSB)
(1) Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80W,
1333MHz FSB)
12 MB (2 x 6 MB) Level 2 cache
2 GB (2 x 1 GB) PC2-5300 DDR2 fully buffered DIMMs (667MHz) with
Advanced ECC (X5472 models)
1 GB (2 x 512 MB) PC2-5300 DDR2 fully buffered DIMMs (667MHz)
with Advanced ECC (E5430, E5405 models)
Two embedded NC105i PCIe Gigabit Server Adapters
HP SC40Ge SAS HBA with RAID
None ship standard (up to 4 Hot Plug SATA or SAS drives supported)
4.0TB max. (4 x 1TB Hot Plug 3.5" SAS/SATA hard drives)
Optional CD/DVD-ROM, DVD/CD RW
Rack (1U)

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 13

QuickSpecs

HP ProLiant DL160 Generation 5

Models
Country Code Key

xx = 00
xx = 20
xx = 29
xx = 37
xx = 42
xx = AA

U.S.
Brazil (P/N 445202-201 only)
Japan
APD
Euro
PRC

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 14

QuickSpecs

HP ProLiant DL160 Generation 5

Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for additional information.
NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must
start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option is a Factory Installable Option.

Step 1: Base Configuration (choose one of the following configurable models)
Non-Hot Plug SATA Model
NOTE: Non-Hot Plug models are not upgradeable to Hot Plug. Non-Hot Plug
models require the addition of the HP HBA SAS-SATA 4x1LN Cable Kit (P/N:
452130-B21) in order to connect a hardware RAID controller.
HP ProLiant DL160 G5 Non-Hot Plug SATA Rack CTO Chassis
Factory Integrated Model ships with:

445192-B21

Two embedded NC105i PCIe Gigabit Server Adapters (WOL & PXE-capable)
Two available PCI-Express 2 slots:
Slot 1: full-length/full-height
Slot 2: low-profile/half-height
650 Watt Power Supply
One Highline IEC Power Cord
6 Non-Hot Plug Fans
Rack (1U), (1.75 in / 4.45 cm)
Fixed Rails
Hot Plug Model
HP ProLiant DL160 G5 Hot Plug SAS/SATA Rack CTO Chassis
Factory Integrated Model ships with:
Two embedded NC105i PCIe Gigabit Server Adapters (WOL & PXE-capable)
Two available PCI-Express 2 slots:

445193-B21

Slot 1: full-length/full-height
Slot 2: low-profile/half-height
650 Watt Power Supply
One Highline IEC Power Cord
6 Non-Hot Plug Fans
Rack (1U), (1.75 in / 4.45 cm)
Fixed Rails

Step 2: Choose Required Options (only one of the following from each list unless
otherwise noted)
Processors

Quad-Core Processors
Quad-Core Intel® Xeon® processor X5482 (3.20 GHz, 120W, 1600MHz FSB),
FIO
NOTE: If 2 processors are desired, select one 495614-L21 and one 495614B21.

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

495614-L21

Page 15

QuickSpecs

HP ProLiant DL160 Generation 5

Configuration Information - Factory Integrated Models
Quad-Core Intel® Xeon® processor X5472 (3.00 GHz, 120W, 1600MHz FSB),
FIO
NOTE: If 2 processors are desired, select one 462465-L21 and one 462465B21.
Quad-Core Intel® Xeon® processor X5470 (3.33 GHz, 120W, 1333MHz FSB),
FIO
NOTE: If 2 processors are desired, select one 495612-L21 and one 495612B21.
Quad-Core Intel® Xeon® processor X5460 (3.16 GHz, 120W, 1333MHz FSB),
FIO
NOTE: If 2 processors are desired, select one 446085-L21 and one 446085B21.
Quad-Core Intel® Xeon® processor L5430 (2.60 GHz, 50W, 1333MHz FSB),
FIO
NOTE: If 2 processors are desired, select one 495616-L21 and one 495616B21.
Quad-Core Intel® Xeon® processor L5420 (2.50 GHz, 50W, 1333MHz FSB),
FIO
NOTE: If 2 processors are desired, select one 495479-L21 and one 495479B21.
Quad-Core Intel® Xeon® processor L5410 (2.33 GHz, 50W, 1333MHz FSB),
FIO
NOTE: If 2 processors are desired, select one 448369-L21 and one 448369B21.
Quad-Core Intel® Xeon® processor E5472 (3.00 GHz, 80W, 1600MHz FSB),
FIO
NOTE: If 2 processors are desired, select one 448365-L21 and one 448365B21.
Quad-Core Intel® Xeon® processor E5462 (2.80 GHz, 80W, 1600MHz FSB),
FIO
NOTE: If 2 processors are desired, select one 463076-L21 and one 463076B21.
Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 80 W, 1333 MHz FSB),
FIO
NOTE: If 2 processors are desired, select one 446079-L21 and one 446079B21.
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80W, 1333MHz FSB),
FIO
NOTE: If 2 processors are desired, select one 446077-L21 and one 446077B21.
Dual-Core Processors
Dual-Core Intel® Xeon® processor X5272 (3.40 GHz, 80W, 1600MHz FSB)
NOTE: If 2 processors are desired, select one 448371-L21 and one 448371B21.
Dual-Core Intel® Xeon® processor L5240 (3.00 GHz, 40W, 1333MHz FSB), FIO
NOTE: If 2 processors are desired, select one 448373-L21 and one 448373B21.

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

462465-L21

495612-L21

446085-L21

495616-L21

495479-L21

448369-L21

448365-L21

463076-L21

446079-L21

446077-L21

448371-L21

448373-L21

Page 16

QuickSpecs

HP ProLiant DL160 Generation 5

Configuration Information - Factory Integrated Models
Memory

Hard Drive

Storage Controllers

1 GB FBD PC2-5300 2 X 512 MB Kit
2 GB FBD PC2-5300 2 X 1 GB Kit
4 GB FBD PC2-5300 2 X 2 GB Kit
8 GB FBD PC2-5300 2 X 4 GB Kit
Dual Rank
4 GB FBD PC2-6400 800MHz 2 x 2 GB Dual Rank Kit
8 GB FBD PC2-6400 2 x 4 GB Dual Rank Kit
16 GB FBD PC2-5300 2 x 8 GB Dual Rank Kit
64 GB FBD PC2-5300 8 x 8 GB Dual Rank Kit
Low Power
2 GB FBD PC2-5300 2 X 1 GB Low Power Kit
4 GB FBD PC2-5300 2 x 2 GB Low Power Kit
8 GB FBD PC2-5300 2 x 4 GB Low Power Kit

NOTE: Transfer rates of drives are dependent on the maximum transfer rate
supported by the HBA or Controller. Refer to the HBA or Controller technical
specifications for details.
SATA Non-Hot Plug Midline (MDL) Drive
NOTE: A minimum of one hard drive is required when purchasing Non-Hot Plug
CTO Chassis Model (P/N 445192-B21).
NOTE: SATA Non-Hot Plug Hard Drives ONLY required when purchasing NonHot Plug CTO Chassis Models (445192-B21) in Step 1.
HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD
HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD
HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD
SATA Non-Hot Plug Entry (ETY) Drives
HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD

NOTE: A minimum of one SAS Controller is required when purchasing Hot Plug
CTO Chassis Model (P/N 445193-B21).
NOTE: The below storage controllers are intended for use with internal drives
ONLY in the Hot Plug CTO Chassis Model (P/N 445193-B21).
HP SC44Ge Host Bus Adapter
NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard
Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
HP SC40Ge 4 Internal PCIe SAS RAID Half Height HBA, FIO
NOTE: Recommended HBA when purchasing Hot Plug CTO Chassis Model
(P/N 445193-B21).
NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard
Drives are required. Transfer rate 1.5 Gb/s SATA, 3 Gb/s SAS.
HP Smart Array E500/256MB Controller with Battery, FIO
NOTE: Customers can only order one Smart Array E500/256MB Controller and
one Battery-backed write cache upgrade (P/N 383280-B21) for the HP ProLiant
DL160 G5 server based on battery space.
HP Smart Array E200/128 BBWC Controller
HP HBA SAS-SATA 4x1LN Cable Kit

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

397409-B21
397411-B21
397413-B21
397415-B21
484060-B21
484062-B21
413015-B21
495604-B21
461826-B21
461828-B21
466440-B21

462595-B21
458941-B21
458939-B21
458947-B21

416096-B21

449363-B21

462105-B21

411508-B21
452130-B21

Page 17

QuickSpecs

HP ProLiant DL160 Generation 5

Configuration Information - Factory Integrated Models
NOTE: This option is required for any internal port HBA or controller that has a
standard 4 port SAS/SATA connector.

Step 3: Choose Additional Factory Integratable Options (only one of the following
from each list unless otherwise noted)
Power Supply

HP High Efficiency Power Supply Kit, FIO
NOTE: Selection of the HE Power Supply Unit will remove the 650 Watt
standard power supply and requires the purchase of Power Supply Backplane
(p/n 453652-B21).
HP Power Supply Backplane, FIO
NOTE: This backplane must be ordered with the High Efficiency Power Supply
(P/N 453650-B2).

453650-B21

453652-B21

Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Options" section below. Some options may not be available for factory
integration. Please contact an HP sales representative for additional information.

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 18

QuickSpecs

HP ProLiant DL160 Generation 5

Options
Server Management
Stand Alone Software
Product and ProLiant
Essentials

NOTE: Electronic licensing options are available for Insight Control suites and
select ProLiant Essentials software products. Please see the appropriate Insight
Control and ProLiant Essentials QuickSpecs for additional information.
Control
Lights-Out 100i Advanced Pack
HP Lights Out 100i Advanced Pack, No Media, 1-Server License
NOTE: Supports HP ProLiant DL 160 G5, DL165 G5 and DL185 G5 servers.
NOTE: Flexible and volume quantity (AKA) license kits are available for the
Lights-Out 100i Advanced Pack licenses as well as Electronic License To Use
(E-LTU). AKA Tracking licenses require a 100 unit minimum forecast at initial
contract signing. For these additional part numbers, please refer to each
software products' QuickSpecs at this link for more information:
http://h18004.www1.hp.com/products/servers/management/remotemgmt.html.
DEPLOY
Rapid Deployment Pack
ProLiant Essentials Rapid Deployment Pack No Media 1-Server License
including 1 year of 24x7 Technical Support and Updates
NOTE: This license allows 1 server to be deployed and managed via RDP.
Customer will receive a printed license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online or via fax
in order to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support and Update Service.
NOTE: For additional License Kits please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11053_div/11053_div.html
NOTE: Flexible and volume quantity license kits are available for ProLiant
Essentials Value Packs. Refer to: http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information.

Processor

Quad-Core Processors
Quad-Core Intel® Xeon® processor X5482 (3.20 GHz, 120W, 1600MHz FSB)
Quad-Core Intel® Xeon® processor X5472 (3.00 GHz, 120W, 1600MHz FSB)
Quad-Core Intel® Xeon® processor X5470 (3.33 GHz, 120W, 1333MHz FSB)
Quad-Core Intel® Xeon® processor X5460 (3.16 GHz, 120W, 1333MHz FSB)
Quad-Core Intel® Xeon® processor L5430 (2.60 GHz, 50W, 1333MHz FSB)
Quad-Core Intel® Xeon® processor L5420 (2.50 GHz, 50W, 1333MHz FSB)
Quad-Core Intel® Xeon® processor L5410 (2.33 GHz, 50W, 1333MHz FSB)
Quad-Core Intel® Xeon® processor E5472 (3.00 GHz, 80W, 1600MHz FSB)
Quad-Core Intel® Xeon® processor E5462 (2.80 GHz, 80W, 1600MHz FSB)
Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 80W, 1333MHz FSB)
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80W, 1333MHz FSB)
Dual-Core Processors
Dual-Core Intel® Xeon® processor X5272 (3.40 GHz, 80W, 1600MHz FSB)
Dual-Core Intel® Xeon® processor L5240 (3.00 GHz, 40W, 1333MHz FSB)

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

455342-B21

452151-B21

495614-B21
462465-B21
495612-B21
446085-B21
495616-B21
495479-B21
448369-B21
448365-B21
463076-B21
446079-B21
446077-B21
448371-B21
448373-B21

Page 19

QuickSpecs

HP ProLiant DL160 Generation 5

Options
Memory

Hard Drives

1 GB FBD PC2-5300 2 X 512 MB Kit
2 GB FBD PC2-5300 2 X 1 GB Kit
4 GB FBD PC2-5300 2 X 2 GB Kit
8 GB FBD PC2-5300 2 X 4 GB Kit
Dual Rank
4 GB FBD PC2-6400 2 X 2 GB Dual Rank Kit
8 GB FBD PC2-6400 2 x 4 GB Dual Rank Kit
16 GB FBD PC2-5300 2 x 8 GB Dual Rank Kit
64 GB FBD PC2-5300 8 x 8 GB Dual Rank Kit
Low Power
2 GB FBD PC2-5300 2 X 1 GB Low Power Kit
4 GB FBD PC2-5300 2 x 2 GB Low Power Kit
8 GB FBD PC2-5300 2 x 4 GB Low Power Kit

NOTE: Transfer rates of drives are dependent on the maximum transfer rate
supported by the HBA or Controller. Refer to the HBA or Controller technical
specifications for details.
SATA Non-Hot Plug Midline (MDL) Drives (Non-Hot Plug Models Only)
HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD
HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD
HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD
SATA Non-Hot Plug Entry (ETY) Drives
HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD
NOTE: When purchasing systems with the 500GB Non-Hot Plug SATA drives,
please reference the Configuration Information Section of this QuickSpecs to
order via Configuration to Order.
SATA Hot Plug Midline (MDL) Drives (SAS/SATA Hot Plug Models Only)
NOTE: A SAS HBA or Array Controller is required.
HP 1TB 3G SATA 7.2K 3.5" MDL HDD
HP 750GB 3G SATA 7.2K 3.5" MDL HDD
HP 500GB 3G SATA 7.2K 3.5" MDL HDD
HP 250GB 3G SATA 7.2K 3.5" MDL HDD
NOTE: Server BIOS update is required to support 3G SATA drives when
configured with embedded SATA controller. Please see communication for
details: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?
objectID=
c01511475
SATA SFF Hot Plug Entry (ETY) Drives
HP 160GB 3G SATA 7.2K 3.5" ETY HDD
NOTE: Server BIOS update is required to support 3G SATA drives when
configured with embedded SATA controller. Please see communication for
details: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?
objectID=
c01511475

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

397409-B21
397411-B21
397413-B21
397415-B21
484060-B21
484062-B21
413015-B21
495604-B21
461826-B21
461828-B21
466440-B21

462595-B21
458941-B21
458939-B21
458947-B21

454146-B21
458930-B21
458928-B21
458926-B21

458945-B21

Page 20

QuickSpecs

HP ProLiant DL160 Generation 5

Options
NOTE: SATA hard drives have a 1-year warranty. Please see QuickSpecs for
Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/11940_div/11940_div.html
(Worldwide)
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
(Worldwide)
SAS Hot Plug 3.5" Midline (MDL) Drives
HP 1TB 7.2K 3.5" DP SAS MDL HDD
HP 750GB 7.2K 3.5" DP SAS MDL HDD
SAS Hot Plug 3.5" Enterprise (ENT) Drives
HP 400GB 3G 10K 3.5" DP SAS HDD
HP 450GB 3G 15K 3.5" DP SAS ENT HDD
HP 300GB 3G SAS 15K 3.5" SP HDD
HP 300GB 3G SAS 15K 3.5" DP HDD

461137-B21
461135-B21
459508-B21
454232-B21
431944-B21
416127-B21

HP 146GB 3G SAS 15K 3.5" SP HDD
HP 146GB 3G SAS 15K 3.5" DP HDD
HP 72GB 3G SAS 15K 3.5" SP HDD
HP 72GB 3G SAS 15K 3.5" DP HDD
NOTE: The purchase of SAS HBA or array controller is required.
NOTE: SAS Enterprise drives have a 3-year warranty Please see the
QuickSpecs for Technical Specifications and additional information:
hhttp://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html
(Worldwide)

375872-B21
384854-B21
375870-B21
384852-B21

Hot Plug HDD
Backplane Option

Hot Plug HDD Backplane 1U 2S Kit
NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is
required if ordering third or fourth Hard Drives for Hot Plug models only.

445985-B21

Graphic Cards

HP Nvidia Quadro FX1700 512 MB PCI-E 16x Kit
HP Nvidia FX3700 512 MB PCI-E 16x Kit

490646-B21
490062-B21

Optical Drives

DVD-ROM Drive (optional)
DVD/CD RW Drive (optional)

447889-B21
447891-B21

Storage Controllers

NOTE: The addition of storage controllers for internal hard drive use is intended
for use ONLY with the Hot Plug SATA/SAS Model Chassis (P/N 445148-B21).
SAS HBA
HP 8 Internal Port SAS HBA with RAID
NOTE: For use with Hot Plug SAS/SATA models.
NOTE: The selection HP 8 Internal Port SAS HBA with RAID requires the
purchase of the LowProfile PCI-X Riser Option kit (P/N 452698-B21)
NOTE: Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS

347786-B21

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 21

QuickSpecs

HP ProLiant DL160 Generation 5

Options
HP SC44Ge Host Bus Adapter
NOTE: PCI-Express SAS HBA.
NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard
Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18004.www1.hp.com/products/quickspecs/12332_div/12332_div.html
(8 Internal Port SAS HBA)
http://h18004.www1.hp.com/products/quickspecs/12617_div/12617_div.html
(SC44Ge HBA)
SCSI HBA
HP SC11Xe Host Bus Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12566_div/12566_div.html
(SC11Xe HBA)
SAS Controllers
Smart Array E200 Controller
HP Smart Array E200/128 BBWC Controller
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12460_div/12460_div.html
(Smart Array E200 Controller)
Smart Array E500 Controller
HP Smart Array E500/256MB Controller
NOTE: Standard RAID 0,1, 1+0.
NOTE: Customers can only order one Smart Array E500/256MB Controller and
one Battery-backed write cache upgrade (P/N 383280-B21) for the HP ProLiant
DL160 G5 server based on battery space.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12700_div/12700_div.html
(Smart Array E500 Controller)
Smart Array P400 Controller
HP Smart Array P400/256 Controller
NOTE: Customers can only order one Smart Array P400/256MB Controller and
one Battery-backed write cache upgrade (P/N 383280-B21) for the HP ProLiant
DL160 G5 server based on battery space.
HP Smart Array P400/512 Controller with BBWC
NOTE: Customers can only order one Smart Array P400/512MB BBWC
Controllers for the HP ProLiant DL160 G5 server based on battery space.
512MB Battery-backed write cache upgrade
NOTE: Contains batter and memory module. For Smart Array P400 Controller.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12400_div/12400_div.html
(Smart Array P400 Controller)
Smart Array P800 Controller
HP Smart Array P800/512 BBWC Controller

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

416096-B21

412911-B21

411508-B21

435129-B21

405132-B21

411064-B21

405148-B21

381513-B21

Page 22

QuickSpecs

HP ProLiant DL160 Generation 5

Options

Communications

HPC Specific Options

NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12616_div/12616_div.html
(Smart Array P800 Controller)
Riser Board Kits
HP PCI-X Riser Board Kit
NOTE: Replaces the standard Full Height PCI Express slot with a Full Height
PCI-X slot.
HP PCI-X L/P Riser Kit
NOTE: Replaces the standard Half Height (LP) PCI Express slot with a Half
Height (LowProfile) PCI-X slot.

445986-B21

HP NC110T PCI Express Gigabit Server Adapter
HP NC360T PCI Express Dual Port Gigabit Server Adapter

434905-B21
412648-B21

HP NC364T PCI Express Quad Port Gigabit Server Adapter
HP NC373F PCI Express Multifunction Gigabit Server Adapter
HP NC373T PCI Express Multifunction Gigabit Server Adapter
HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter
HP NC510C PCIe 10 Gigabit Server Adapter
NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each
NC510C adapter.
HP NC510F PCIe 10 Gigabit Server Adapter
NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each
NC510F adapter.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: www.hp.com/go/ProLiantNICs

435508-B21
394793-B21
394791-B21
458492-B21
414129-B21

HP IB 4X DDR PCI-e Dual Port 0 Memory HCA
HP IB 4X DDR Conn-X PCI-e G2 Dual Port HCA
HP IB 4X DDR PCI-e Dual Port HCA
HP IB 4X DDR PCI-e DUAL PORT HCA
NOTE: For HPC interconnect adapters please see the HPC Interconnect section
of this QuickSpecs.

483513-B21
483514-B21
409376-B21
448397-B21

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

452698-B21

414126-B21

Page 23

QuickSpecs

HP ProLiant DL160 Generation 5

Options
Tape Drives

NOTE: For the complete listing of Tape Drive offerings, please see:
http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
USB Rack-Mount Tape Drives
HP StorageWorks 1U USB Rack-Mount Kit with one DAT 160 USB Tape Drive
NOTE: Pre-configured with one DAT 160 USB tape drive.
SAS Rack-Mount Tape Drives
NOTE: HP recommends purchasing the HP SC44Ge HBA (416096-B21) for a
dedicated SAS HBA for tape.
HP StorageWorks 1U SAS Rack-Mount Kit with one LTO-4 Ultrium 1760
NOTE: Pre-configured with one LTO-4 Ultrium 1760 SAS tape drive.
HP StorageWorks 1U SAS Rack-Mount Kit
NOTE: Supports up to (2) half-height SAS tape drives.
HP StorageWorks DAT 160 SAS Internal Tape Drive
NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A)
HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive
NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A)
HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive
NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A)
SCSI Rack-Mount Tape Solutions
NOTE: SCSI Controller required. HP recommends purchasing the HP SC11Xe
HBA (412911-B21) for a dedicated SCSI HBA for tape.
HP StorageWorks 1U SCSI Rack-mount kit with one LTO-2 Ultrium 448 SCSI
Tape Drive (Carbonite)
NOTE: Pre-configured with one LTO-2 Ultrium 448 SCSI tape drive.
HP StorageWorks 1U SCSI Rack-mount kit with one LTO-3 Ultrium 920
NOTE: Pre-configured with one LTO-3 Ultrium 920 SCSI tape drive.
HP StorageWorks 3U SCSI Rack-Mount with 1 LTO-4 Ultrium 1840 Tape Drive
NOTE: Pre-configured with one LTO-4 Ultrium 1840 SCSI tape drive.
For an up-to-date listing of the latest O/S and software support details for HP
Ultrium tape drives, please visit: http://www.hp.com/go/connect

Disk-Based Backup

RDX Removable Disk Backup
HP StorageWorks RDX160 External Removable Disk Backup System
NOTE: 160GB of Disk Storage
HP StorageWorks RDX320 External Removable Disk Backup System
NOTE: 320GB of Disk Storage
HP StorageWorks RDX500 External Removable Disk Backup System
NOTE: 500GB of Disk Storage
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13036_div/13036_div.html
D2D Backup
HP StorageWorks D2D120 Backup System with Data Protector Express
Software Kit
NOTE: 2TB of Disk Storage
HP StorageWorks D2D130 Backup System with LTO-3 Ultrium 920 SAS Tape
Drive
NOTE: 3TB of Disk Storage.

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

AG703A

EH946A
AE459A
Q1587A
DW085A
EH847A

DW028B

EH903A
EH926A

AJ766A
AJ768A
AJ935A

EH924A

EH952A

Page 24

QuickSpecs

HP ProLiant DL160 Generation 5

Options
HP StorageWorks D2D2503i Backup System
NOTE: 3TB of Disk Storage.
HP StorageWorks D2D4004i Backup System
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12651_div/12651_div.html
(Worldwide)

Tape Autoloaders

HP StorageWorks DAT Autoloader
HP StorageWorks DAT 72x10 tape autoloader
HP StorageWorks 1/8 G2 Tape Autoloader
HP StorageWorks 1/8 G2 LTO-4 Ultrium 1760 SAS Tape Autoloader
HP StorageWorks 1/8 G2 LTO-3 Ultrium 920 SAS Autoloader
HP StorageWorks 1/8 G2 LTO-2 Ultrium 448 Tape Autoloader
HP StorageWorks 1/8 G2 Tape Autoloader Rack Kit
NOTE: Required to install the 1/8 G2 Autoloaders in a standard 19-inch rack;
includes rails and rackmount instructions.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: http://www.hp.com/go/automation needed to create a complete
solution; reference current compatibility information at:
http://www.hp.com/go/ebs.

Tape Libraries

HP StorageWorks MSL2024 Tape Library
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1840 SCSI Drive Library
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1760 SAS Drive Library
HP StorageWorks MSL2024 1 LTO-3 Ultrium 960 SCSI Drive Library
HP StorageWorks MSL2024 1 LTO-3 Ultrium 920 SAS Drive Library
HP StorageWorks MSL2024 1 LTO-2 Ultrium 448 SCSI Drive Library
HP StorageWorks MSL4048 Tape Library
HP StorageWorks MSL4048 1 Ultrium 920 SAS Drive Library
HP StorageWorks MSL4048 1 Ultrium 960 SCSI Drive Library
HP StorageWorks MSL4048 2 LTO-4 Ultrium 1760 SAS Drive Library
HP StorageWorks MSL4048 1 LTO-4 Ultrium 1840 SCSI Drive Library
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: http://www.hp.com/go/automation needed to create a complete
solution; reference current compatibility information at:
http://www.hp.com/go/ebs.

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

EH945A
EH938A

AE313B
AK377A
AH558A
AH164A
AH166A

AJ033A
AK378A
AG115A
AH559A
AG116A
AH560A
AG322A
AK380A
AJ035A

Page 25

QuickSpecs

HP ProLiant DL160 Generation 5

Options
HP StorageWorks 50
Modular Smart Array

HP StorageWorks 50 Modular Smart Array
NOTE: Rack-mountable 10 SFF drive enclosure with single I/O module,
redundant hot plug power supplies and hot plug fans.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12245_div/12245_div.html
(Worldwide)

364430-B21

HP StorageWorks 60
Modular Smart Array

HP StorageWorks 60 Modular Smart Array
NOTE: Rack-mountable 12-drive (3.5" 3G SAS/1.5G SATA) 2U enclosure with
3Gb/s SAS host connectivity and redundant power supplies.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12627_div/12627_div.html
(Worldwide)

418408-B21

HP StorageWorks 70
Modular Smart Array

HP StorageWorks 70 Modular Smart Array
NOTE: Rack-mountable 25-drive (2.5" 3G SAS/1.5G SATA) 2U enclosure with
3Gb/s SAS host connectivity and redundant power supplies.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12652_div/12652_div.html
(Worldwide)

418800-B21

High Availability
Cluster Options

HP Serviceguard for Linux
HP Serviceguard Linux for HP ProLiant/x86 Servers
Licensed per physical server
Includes media and One Year 24x7 Software Support & Updates
HP Serviceguard Linux Oracle Database Toolkit for HP ProLiant/x86 Servers
Licensed per cluster
Includes media and One Year 24x7 Software Support & Updates
HP Serviceguard Extension for SAP on Linux for HP ProLiant/x86 Servers
Licensed per physical server
Includes media and One Year 24x7 Software Support & Updates
HP Serviceguard Linux Extended Distance Cluster (XDC) for HP ProLiant/x86
Servers
Licensed per physical server
Includes media and One Year 24x7 Software Support & Updates
NOTE: The above is not a complete list of all HP Serviceguard for Linux product
numbers For a detailed list of supported configuration/certification options for HP
Serviceguard for Linux please refer to the HP Serviceguard for Linux
Configuration & Ordering Guide available at: http://www.hp.com/go/sglx/info.
NOTE: HP Serviceguard for Linux products running on x86 platforms now
include one year of 24 x 7 Software Technical Support and Updates. Please see
the Support Information section of the HP Serviceguard for Linux QuickSpecs for
details.
NOTE: For additional information including a complete list of Product Numbers
for HP Serviceguard for Linux, please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11518_div/11518_div.html

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

463831-B21

463833-B21

463834-B21

463835-B21

Page 26

QuickSpecs

HP ProLiant DL160 Generation 5

Options
(Worldwide)

StorageWorks Options StorageWorks Fibre Channel HBA
NOTE: The following is a list of all Fibre Channel Host Bus Adapters for
Windows and Linux. For detailed compatibility information please see:
http://h18006.www1.hp.com/storage/saninfrastructure/hba.html
HP StorageWorks FC2142SR 4Gb PCI-e HBA
HP StorageWorks FC2242SR Dual Channel 4 Gb PCI-e HBA
HP StorageWorks FC1142SR 4Gb PCI-e HBA
HP StorageWorks FC1242SR Dual Channel 4 Gb PCI-e HBA
HP StorageWorks FC2143 4Gb PCI-X 2.0 - to Fibre Channel HBA
HP StorageWorks FC2243 Dual Channel 4Gb PCI-X 2.0 HBA
HP StorageWorks 81E 8Gb SP PCI-e FC HBA
HP 82E 8Gb Dual-port PCI-e FC HBA
HP 82Q 8Gb Dual Port PCI-e FC HBA
StorageWorks SCSI HBA
HP U320e SCSI Host Bus Adapter
NOTE: Recommended Dual Channel Ultra320 SCSI Controller for connecting
multi-drive MSL tape libraries to ProLiant servers
HP StorageWorks FC2243 4Gb PCI-X 2.0 DC HBA

Uninterruptible Power HP UPS R1500 G2 UPS
Systems - Rack
HP, R1.5k VA UPS, 1U,NA
HP, R1.5kVA UPS, 1U, INTL
HP, R1.5kVA UPS, 1U, JPN/TW
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13130_div/13130_div.html
(Worldwide)
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13129_div/13129_div.html
(Worlwide)

USB Options

HP 1GB USB 2.0 Floppy Drive Key
USB 1.44-MB External Diskette Drive
USB Floppy Drive
HP USB-P/S2 Mouse
HP Keyboard (USB) standard 2004
HP USB Internal Cable Kit

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

A8002A
A8003A
AE311A
AE312A
AD167A
AD168A
AJ762A
AJ763A
AJ764A
AH627A

AD168A

AF419A
AF418A
AF421A

442085-B21
DC141B
DC361B
DC369A
DT528A#xxx
451363-B21

Page 27

QuickSpecs

HP ProLiant DL160 Generation 5

Options
HP Rack 10000 G2
Series
(Carbon/Graphite
Metallic)

10642 G2 (42U) Rack Cabinet 1200mm Deep - Shock Pallet
10642 G2 (42U) Rack Cabinet 1200mm Deep - Pallet
10647 G2 (47U) Rack Cabinet 1200mm Deep - Shock Pallet
10647 G2 (47U) Rack Cabinet 1200mm Deep - Pallet
NOTE: It is mandatory to use a shock pallet when shipping racks with equipment
installed.
NOTE: Please see the Rack 10000 G2 QuickSpecs for Technical Specifications
such as height, width, depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html
(Worldwide)
NOTE: For additional information regarding Rack Cabinets, please see the
following URL: http://www.hp.com/go/rackandpower.

AF034A
AF038A
AF044A
AF045A

HP KVM Switch
Options

2x1x16 IP Console Switch with Virtual Media

AF601A

4x1x16 IP Console Switch with Virtual Media
2x16 Server Console Switch with Virtual Media
PS/2 Virtual Media Interface Adapter, 1 pack
NOTE: Requires PS/2 and one USB port on server.
HP Server Console Switch (KVM), 0 x 1 x 8 port
HP Server Console Switch (KVM), 0 x 2 x 16 port
PS/2 Interface Adapter, 1 pack
PS/2 Interface Adapter, 8 pack
HP 1x4 Console Switch
HP PS2 Server Console Cable, 6 foot, 2-Pack
HP USB Server Console Cable, 6 foot, 2-Pack
NOTE: required for supporting USB peripherals.
NOTE: Cat5e cables are required to connect Interface Adapters to Console
Switches. Cat5e cables can be found at the following URL:
http://www.hp.com/go/kvm

AF602A
AF600A
AF604A

HP Serial Console
Server Options

HP 16 Port Serial Console Server (worldwide)
HP 48 Port Serial Console Server (worldwide)
Serial Adapter, RJ45-D89 DCE Female, 1-pack
Serial Adapter, RJ45-D89 DCE Female, 8-pack
NOTE: For additional information regarding KVM switches, Serial Console
servers, rack mount monitors, keyboards and all related options please see the
following URL: http://www.hp.com/go/kvm

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

336044-B21
336045-B21
262588-B21
262587-B21
AF611A
AF612A
AF613A

AF101A
AF102A
AF103A
AF110A

Page 28

QuickSpecs

HP ProLiant DL160 Generation 5

Options
Service and Support Hardware Services 4-Hour On-site Service
Offerings
13-Hour x 5-Day Coverage, 3 Years, Electronic
(HP Care Pack Services)
24-Hour x 7 Day Coverage, 3 Years, Electronic
Hardware Services Next Business Day On-Site Service
9-Hour x 5-Day Coverage, 3 Years, Electronic
Hardware Services 6-Hour Call to Repair On-Site Service
Hardware Installation, Electronic
NOTE: For more information, customer/resellers can contact:
http://www.hp.com/services/carepack

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

U9509E
U9510E
U9508E
U9520E

Page 29

QuickSpecs

HP ProLiant DL160 Generation 5

Memory
HP ProLiant DL160 G5 (all models)
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Standard Memory
1GB (2x512MB) or 2GB (2 x 1GB) depending on model, PC2-5300 Fully Buffered DIMM memory, with Advanced ECC.
Maximum Memory
Up to 32GB memory is available with the optional installation of PC2-5300 Fully Buffered DIMM memory kits.
NOTE: Memory should be installed in pairs and matched for optimum performance.
NOTE: Chart does not represent all possible memory configurations.
Memory
Slot
1
2
3
4
5
6
7
Standard (1 GB)
512 MB
Empty
512 MB
Empty
Empty
Empty
Empty
Standard (2 GB)
1 GB
Empty
1 GB
Empty
Empty
Empty
Empty
Maximum (64GB)
8 GB
8 GB
8 GB
8 GB
8 GB
8 GB
8 GB
Following are memory options available from HP:
1 GB FBD PC2-5300 2 X 512 MB Kit
2 GB FBD PC2-5300 2 X 1 GB Kit
4 GB FBD PC2-5300 2 X 2 GB Kit
8 GB FBD PC2-5300 2 X 4 GB Kit
Dual Rank
4 GB FBD PC2-6400 2 X 2 GB Dual Rank Kit
8 GB FBD PC2-6400 2 x 4 GB Dual Rank Kit
16 GB FBD PC2-5300 2 x 8 GB Dual Rank Kit
64 GB FBD PC2-5300 8 x 8 GB Dual Rank Kit
Low Power
2 GB FBD PC2-5300 2 X 1 GB Low Power Kit
4 GB FBD PC2-5300 2 x 2 GB Low Power Kit
8 GB FBD PC2-5300 2 x 4 GB Low Power Kit

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

8
Empty
Empty
8 GB

397409-B21
397411-B21
397413-B21
397415-B21
484060-B21
484062-B21
413015-B21
495604-B21
461826-B21
461828-B21
466440-B21

Page 30

QuickSpecs

HP ProLiant DL160 Generation 5

Storage
1-4
A

Four Non-hot plug SATA or four 3.5" Hot-plug
SAS/SATA hard drive bays
Optional DVD-ROM, or DVD/CD RW

Drive Support
Removable Media

DVD-ROM
DVD/CD RW

Quantity
Supported
Up to 1
Up to 1

Position
Supported
A
A

Controller
Integrated IDE (ATAPI) (optional)
Integrated IDE (ATAPI) (optional)

Hard Drives
NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported by the HBA or Controller. Refer to
the HBA or Controller technical specifications for details.
SATA Non-Hot Plug Midline (MDL) Drives 3.5"
Quantity
Position
Supported
Supported Controller
250GB 1.5G SATA 7.2K
Up to 4
1-4
HP Embedded SATA RAID Controller
500GB 1.5G SATA 7.2K
NOTE: Transfer rate: 1.5 Gb/s SATA
750GB 1.5G SATA 7.2K
SATA Non-Hot Plug Entry (ETY) Drives 3.5"
Quantity
Position
Supported
Supported Controller
160GB 1.5G SATA 7.2K
Up to 4
1-4
HP Embedded SATA RAID Controller
NOTE: Transfer rate: 1.5 Gb/s SATA

SATA Hot Plug Midline (MDL) Drives 3.5"
NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for
Hot Plug models only.
Quantity
Position
Supported
Supported Controller
160GB SATA 7.2K
Up to 4
1-4
HP SC40Ge 4-Port Internal SAS HBA with RAID 0, 1
250GB SATA 7.2K
NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G
500GB SATA 7.2K
SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA,
750GB SATA 7.2K
3 Gb/s SAS
1TB SATA 7.2K
HP Smart Array P400 Controller
HP Smart Array P800 Controller
SATA Non-Hot Plug Enterprise (ENT) Drives 3.5"
Quantity
Position
Supported
Supported Controller
160GB 1.5G SATA 7.2K
Up to 4
1-4
HP Embedded SATA RAID Controller
NOTE: Transfer rate: 1.5 Gb/s SATA
SAS Hot Plug 3.5"Midline (MDL) Drives
NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for
Hot Plug models only.

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 31

QuickSpecs

HP ProLiant DL160 Generation 5

Storage

1TB 3G 7.2K
750 3G 7.2K

Quantity
Supported
Up to 4

Position
Supported
1-4

Controller
Embedded SATA with integrated SATA RAID 0,1
HP Smart Array E200/128 BBWC Controller
HP Smart Array P400 Controller
HP Smart Array E500/256MB Controller
HP Smart Array P800 Controller

SAS Hot Plug 3.5" Enterprise (ENT) Drives
NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for
Hot Plug models only.
Quantity
Position
Supported
Supported Controller
72GB 3G 15K
Up to 4
1-4
HP SC40Ge 4-Port Internal SAS HBA with RAID 0, 1
146GB 3G 15K
NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G
300GB 3G 15K
SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA,
450GB 3G 15K
3 Gb/s SAS
400GB 3G 10K
HP Smart Array P400 Controller
HP Smart Array P800 Controller

External Storage

20 Modular Smart Array

50 Modular Smart Array

60 HP StorageWorks
Modular Smart Array
70 HP StorageWorks
Modular Smart Array

Quantity
Supported
Up to 2 per SA6402
Up to 4 per SA6404
Up to 2

Position
Supported
External

Up to 8

External

Smart Array 6402/128 Controller
Smart Array 6404/256 Controller
Smart Array 642 Controller
HP Smart Array P800/512 BBWC Controller

Up to 8

External

HP Smart Array P800/512 BBWC Controller

External

Controller
Smart Array 6402/128 Controller
Smart Array 6404/256 Controller
Smart Array 642 Controller

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 32

QuickSpecs

HP ProLiant DL160 Generation 5

Storage
Tape and Disk-Based Backup
NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the
following:
http://h18000.www1.hp.com/products/quickspecs/division/10233.html (Worldwide)
NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Autoloaders and Tape Libraries listed
below, please see the following:
http://h18000.www1.hp.com/products/quickspecs/division/10809.html (Worldwide)
NOTE: For complete listing of tape drive offerings see:
http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
NOTE: SAS Tape Drives: Connecting hard drive cage and SAS tape to the same SAS Controller using split cable (supplied
with tape drive) deactivates 1 of the hard drive bays. Actual hard drive bay deactivated depends on where split cable plugs
into SAS drive connector. Example: 3x SAS cable connector plugged into SAS drive connector (5-8) on the back of the hard
drive cage would mean drive bay 8 is deactivated.

HP StorageWorks SCSI
Tape Drives, External
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO4 Ultrium 1760
LTO-4 Ultrium 1840
DAT 40
DAT 72
DAT 160
1U Rack-Mount Kit
3U Rack-Mount Kit

Position
Supported
External

Controller
HP SC11Xe Host Bus Adapter

Controller/HBA
Option Kit Part
Number
412911-B21

HP StorageWorks USB
Tape Drives, External
DAT 40 USB
DAT 72 USB
DAT 160 USB
1U USB Rack-Mount Kit

External

USB 2.0 Port

HP StorageWorks SAS
Tape Drives, External
DAT 160 SAS
LTO-2 Ultrium 448 SAS
LTO-3 Ultrium 920 SAS
LTO-4 Ultrium 1760 SAS
LTO-4 Ultrium 1840 SAS
1U Rack-Mount Kit
3U Rack-Mount Kit

External

HP SC44Ge Host Bus Adapter

416096-B21

HP StorageWorks SCSI
Tape Automation,

External

HP SC11Xe Host Bus Adapter

412911-B21

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

N/A

Page 33

QuickSpecs

HP ProLiant DL160 Generation 5

Storage
HP U320e SCSI Host Bus Adapter
NOTE: Recommended for MSL tape libraries.

External
DAT 72x10 Autoloader
1/8 G2 Autoloader
MSL2024
MSL4048

HP SC44Ge Host Bus Adapter

AH627A

HP StorageWorks SAS
Tape Automation,
External
1/8 G2 Autoloader
MSL2024
MSL4048

External

416096-B21

HP StorageWorks Fibre
Tape Automation,
External
MSL2024
MSL4048
MSL8096
MSL6000

External

Please consult the EBS connectivity matrix at:
http://www.hp.com/go/ebs for detailed connectivity information.

N/A

HP StorageWorks RDX
Removable Disk
Backup System,
External
RDX160
RDX320
RDX500

External

USB 2.0 port

N/A

HP StorageWorks D2D
Backup Systems
D2D120
D2D130
D2D2503i
D2D4004i

External

Embedded Network Controller

N/A

NOTE: Please visit: http://www.hp.com/go/connect for details
about minimum SAS controller firmware version and SAS
cabling requirements.

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 34

QuickSpecs

HP ProLiant DL160 Generation 5

Power Specifications
Operational Input
90Vac to 264Vac full range
Voltage Range (Vrms)
Frequency Range
47 Hz to 63 Hz
(Nominal) (Hz)
Nominal Input Voltage
(Vrms)
Max Rated Output
Wattage Rating
Nominal Input Current
(A rms)
Max Rated Input
Wattage Rating (Watts)
Max. Rated VA
(Volt-Amp)
Efficiency (%)
Power Factor
Leakage Current (mA)
Maximum Inrush
Current (A peak)
Maximum Inrush
Current Duration (mS)

100

115

200

220

230

240

653.10

653.19

653.08

652.96

653.08

652.96

8.55

7.31

4.12

3.77

3.6

3.46

855

840.72

824.12

827.5

806.3

805.71

990

990

990

990

990

990

76.39
0.998
<3.5mA
60A

77.69
0.997
<3.5mA
60A

79.25
0.983
<3.5mA
60A

78.91
0.976
<3.5mA
60A

81
0.973
<3.5mA
60A

81.04
0.969
<3.5mA
60A

1mS

1mS

1mS

1mS

1mS

1mS

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 35

QuickSpecs

HP ProLiant DL160 Generation 5

System Specifications
Power
ProLiant DL160 G5 Fully Configured
115V/60Hz
220V/50Hz
Fully Loaded System Input Wattage (W)
651
638
Fully Loaded System Input Current (A rms)
5.7
3.0
Fully Loaded System Thermal (BTU- Hr)
2218
2174
Fully Loaded System VA (Volt-Amp)
657
657
System Leakage with all power supplies
1.58
3.03
loaded (mA)
System Inrush Current with all power
19
37
supplies loaded (A)
Power cord requirements
Nema 5-15P to IEC320-C13
IEC320-C13 to IEC320-C14
NOTE: Power shown is for a fully configured system consisting of (2) CPU, (8) double-sided DIMMs, (2) HDDs, (1) CDROM, and (2) PCI cards.
Power Cord
Server Power Cords

AF556A
One 6' Highline (IEC-IEC) power cord ships standard
NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002)
that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are
primarily connected to PDU's in data center racks so they now ship standard with only a PDU
power cord (416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle
(NEMA-15), the NEMA power cord (227099-001) must be ordered separately.
If customers require a local power cord, they can check the power cord matrix for the appropriate
cord. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix.

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 36

QuickSpecs

HP ProLiant DL160 Generation 5

Technical Specifications
System Unit

Dimensions (H x W x D) 1.70 x 17.64 x 26.85 in (4.32 x 44.80 x 68.20 cm)
(with bezel)
Weight
Maximum
37.00 lb (16.78 kg)
(approximate)
(all hard drives, power
supplies, and processors
installed)
Minimum
30.00 lb (13.69 kg)
(one hard drive, power
supply, and processor
installed)
Input Requirements
Rated Line Voltage
90 to 140 VAC
(per power supply)
180 to 264 VAC
Rated Input Current
7.31A at 115VAC
3.6A at 230VAC
Rated Input Frequency
Rated Input Power
Power Specifications

Power Supply Output
(per power supply)
System Inlet
Temperature

Relative Humidity
(non-condensing)

Altitude

47 to 63 Hz
855W (at 100 VAC),
840.72W (at 200 VAC)
To review typical system power ratings use the Power Calculator which
is available via the online tool located at URL:
http://h30099.www3.hp.com/configurator/calc/Power%
20Calculator%20Catalog.xls
- Click on the system of interest. Example: DL160 G5
- Follow the instructions of the next screens.
Rated Steady-State
653.10W (at 100 VAC),
Power
653.08W (at 200 VAC)
Operating
50° to 95° F (10° to 35° C) at sea level with an
altitude derating of 1.8°F per every 1000 ft
(1.0°C per every 305 m) above sea level to a
maximum of 10,000 ft (3050 m), no direct
sustained sunlight. Maximum rate of change
is 18°F/hr (10°C/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if
operating with a fan fault or above 86°F
(30°C).
Non-operating
40° to 140° F (-40° to 60° C)
Maximum rate of change is 36°F/hr (20°C/hr).
Operating
10% to 85% relative humidity (Rh), 82.4°F
(28°C) maximum wet bulb temperature, noncondensing.
Non-operating
10% to 95% relative humidity (Rh), 101.7°F
(38.7°C) maximum wet bulb temperature,
non-condensing.
Operating
10,000 ft (3050 m). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
1500 ft/min (457 m/min).

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 37

QuickSpecs

HP ProLiant DL160 Generation 5

Technical Specifications
Non-operating

Acoustic Noise

Non-Hot Plug SATA
Hard Drives

30,000 ft (9144 m). Maximum allowable
altitude change rate is 1500 ft/min (457
m/min).
Listed are the declared A-Weighted sound power levels (LWAd) and
declared average bystander position A-Weighted sound pressure levels
(LpAm) when the product is operating in a 23°C ambient environment.
Noise emissions were measured in accordance with ISO 7779 (ECMA
74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
LWAd
6.86
LpAm
52.36dBA
Operating
LWAd
6.89
LpAm
52.60dBA

Emissions
Classification (EMC)

FCC Rating
Normative Standards

Class A
CISPR 22; EN55022; EN55024; FCC CFR 47,
Pt 15; ICES-003; CNS13438; GB9254;
K22;K24; EN 61000-3-2; EN 61000-3-3; EN
60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family
of products is eligible to bear the appropriate compliance logos and
statements.

160-GB 7.2K
458947-B21

Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
(Maximum)
Seek Time (typical
reads, including settling)

160,041 MB
1.028 in (2.61 cm)
4.0 in (10.16 cm)
5.787 in (147.0 mm)
SATA ATA
1.5Gb/s

Single Track
0.9 ms
Average
9.0 ms
Full-Stroke
17.8 ms
Rotational Speed
7,200 rpm
Physical Configuration Bytes/Sector
512
Logical Blocks
312,581,808
Operating Temperature41° to 131° F (5° to 55° C)

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 38

QuickSpecs

HP ProLiant DL160 Generation 5

Technical Specifications
Embedded NC105i PCIe Network Interface
Gigabit Server Adapter

Integrated 10/100/1000BASE-T Transceiver
Combines a triple-speed IEEE 802.3TM - Compliant Media Access
Controller (MAC) with a triple-speed Ethernet transceiver.
Data Transfer Method Compliant to x1 PCIe Specification
Network Transfer Rate 10Base-T (Half-Duplex) 10 Mb/s
10Base-T (Full-Duplex) 20 Mb/s
100Base-TX (Half100 Mb/s
Duplex)
100Base-TX (Full200 Mb/s
Duplex)
1000Base-TX (Half and 2000Mb/s
Full-Duplex)
Connector
RJ-45 connector
Cable Support
Performs all the physical layer functions for 10BASE-T, 100BASE-T,
and 1000BASE-T Ethemet on standard Category 5 UTP

Environment-friendly
Products and
Approach

End-of-life
Management and
Recycling

Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to: http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: http://www.hp.com/go/green. These
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.

© Copyright 2009 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon
Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.

DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 39



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 39
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Creator                         : llPDFLib program
Create Date                     : 2009:03:10 23:21:30
Producer                        : llPDFLib 3.x
Author                          : © 2007 Hewlett-Packard Development Company, L.P.
Title                           : HP ProLiant DL160 Generation 5
Subject                         : QuickSpec
Keywords                        : HP, Product, Bulletin

EXIF Metadata provided by EXIF.tools