Hp Psc 2410 Photosmart All In One Printer Setup Poster Banzaihionelangwin
HP PSC 2400 Photosmart series All-in-One - (English) Setup Poster bpu70226
2015-01-05
: Hp Hp-Psc-2410-Photosmart-All-In-One-Printer-Setup-Poster-140991 hp-psc-2410-photosmart-all-in-one-printer-setup-poster-140991 hp pdf
Open the PDF directly: View PDF .
Page Count: 2
Download | |
Open PDF In Browser | View PDF |
2 Windows Users START HERE Q3083 - 90188 *Q3083-90188* *Q3083-90188* 1 This side of the poster is for Windows users. Make sure you are using the CD and side of the poster that matches your operating system. 4 3 Turn your computer on Begin software installation a Turn on your computer and wait for the Windows desktop to appear. a Insert the HP PSC Windows CD. b Close any open programs. b Follow the onscreen instructions. 5 Attach front panel cover Load paper If the software does not appear on your computer screen after inserting the CD, see the Troubleshooting Information chapter in the Reference Guide. c Do not connect the USB cable yet. When you see the Setup your Device Now dialog box, continue to step 4. 6 Use plain white paper to prepare for print alignment. Connect power cords a Remove any packaging material. b Place the front panel cover over the buttons. Firmly press on all sides to snap the cover in place. Make sure all the buttons are visible. c a a c Lift the display. b c d b 8 Connect supplied phone cord a You must connect the supplied phone cord to the phone jack on the left (1-LINE). Make sure that you see the screen in step 3 before plugging in your USB cable. Do not connect the USB cable to a keyboard. 1-LINE b To connect an answering machine or use your own phone cord, see the Fax Setup chapter in the Reference Guide. 10 Make sure the power is on. Lift the print carriage door up until it catches. Lift the blue and gray latches. b Remove the bright pink tape from both print cartridges. Do not touch the gold-colored contacts or retape the cartridges. Turn HP PSC on a Turn power on. b Wait for the print cartridge message to appear, and then continue to the next step. 11 Insert and align print cartridges Tri-Color a 9 Connect USB cable c Hold the black print cartridge with the HP label on top. Slide the cartridge underneath the metal bar into the right (gray latch) side of the print carriage. d Press down on the gray latch until it locks into place. Insert the color cartridge on the left side, and lock into place. e Finish software installation a Hardware setup is complete. Return to your computer. On the dialog box with the green checkmark, click Next. Depending on your system, it may take 20 minutes or more to finish installing the software. b After you restart your computer, the Fax Setup Wizard appears. Follow the onscreen instructions. When you see the Congratulations! dialog box, you are ready to use your HP PSC. If you encounter any problems during setup, see the Reference Guide. Black Make sure both latches are locked into position. Close the door. f Press OK on the front panel to begin alignment. After a page prints, alignment is complete. Discard or recycle this page. www.hp.com/support Copyright Hewlett-Packard Company 2003 Printed in US. hp psc 2400 photosmart series all-in-one Windows setup poster 7 1 2 Macintosh Users START HERE 3 Attach front panel cover Load paper Use blank white paper to prepare for print alignment. a Remove any packaging material. b Place the front panel cover over the buttons. Firmly press on all sides to snap the cover in place. Make sure all the buttons are visible. This side of the poster is for Macintosh users. Make sure you are using the correct side of the poster and CD for your operating system. 4 c 5 Connect phone cord a You must connect the supplied phone cord to the phone jack on the left (1-LINE). hp psc 2400 photosmart series all-in-one Macintosh setup poster Connect power cords 6 c b 7 Connect USB cable Do not connect the USB cable into a keyboard. 1-LINE b To connect an answering machine or use your own phone cord, see the Fax Setup chapter in the Reference Guide. 8 a Lift the display. c a d Turn HP PSC on a Turn power on. b Wait for the print cartridge message to appear, and then continue to the next step. b 9 Insert print cartridges Align print cartridges Press OK on the front panel to begin alignment. After a page prints, alignment is complete. Discard or recycle this page. Tri-Color a 10 Make sure the power is on. Lift the print carriage door up until it catches. Lift the blue and gray latches. b Remove the bright pink tape from both print cartridges. Do not touch the gold-colored contacts or retape the cartridges. c Hold the black print cartridge with the HP logo on top. Slide the cartridge underneath the metal bar into the right (gray latch) side of the print carriage. d Press down on the gray latch until it locks into place. Insert the color cartridge on the left side, and lock into place. Make sure both latches are locked into position. Close the door. 11 Install software a Turn on your Macintosh and wait for the desktop to appear. Insert the HP PSC Macintosh CD. e Black b Double-click the HP AllIn-One Installer icon in your folder. c Follow the onscreen instruction. Make sure you complete the Setup Assistant. Congratulations! You are ready to begin using your HP device. See the Reference Guide to get started. Have fun!
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2003:06:27 19:27:02 Producer : Acrobat Distiller 4.0 for Windows Author : stestout Creator : PScript5.dll Version 5.2 Title : Banzaihionelangwin.ai Modify Date : 2003:06:27 19:26:38-07:00 Page Count : 2EXIF Metadata provided by EXIF.tools