Hp Virtual Connect Firmware Users Manual Manager Command Line Interface For C Class BladeSystem Version 4.30/4.31 User Guide
2015-01-05
: Hp Hp-Virtual-Connect-Firmware-Users-Manual-201594 hp-virtual-connect-firmware-users-manual-201594 hp pdf
Open the PDF directly: View PDF
Page Count: 211 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 4.30/4.31 User Guide
- Abstract
- Notice
- Contents
- Introduction
- Command line
- Subcommands
- Managed elements
- activity
- all
- auto-deployment
- banner
- cli
- config
- configbackup
- connection-map
- devicebay
- domain
- enclosure
- enet-connection
- enet-vlan
- external-manager
- fabric
- fc-connection
- fcoe-connection
- firmware
- igmp-group
- igmp
- interconnect-mac-table
- interconnect
- iscsi-boot-param
- iscsi-connection
- lacp-timer
- ldap-certificate
- ldap-group
- ldap
- link-dist-interval
- lldp
- local-users
- log-target
- loop-protect
- mac-cache
- mcast-filter-rule
- mcast-filter-set
- mcast-filter
- mfs-filter
- nag-network
- name-server
- network-access-group
- network-range
- network
- port-monitor
- port-protect
- profile
- qos-class
- qos-classifier
- qos-map
- qos
- radius-group
- radius
- role
- server-port-map-range
- server-port-map
- server-port
- server
- serverid
- session
- sflow
- sflow-module
- sflow-ports
- sflow-receiver
- snmp
- snmp-access
- snmp-trap
- snmp-user
- ssh
- ssl-certificate
- ssl-csr
- ssl
- stackinglink
- statistics
- statistics-throughput
- status
- storage-management
- supportinfo
- systemlog
- tacacs
- uplinkport
- uplinkset
- user-security
- user-security
- user
- vcm
- version
- User roles
- Help subsystem
- Output format
- Statistics descriptions
- Configuring the Virtual Connect domain using the CLI
- Basic configuration
- Logging in to the CLI
- Domain setup
- Importing an enclosure
- Setting the domain name
- Configuring LDAP authentication support for users
- Configuring RADIUS authentication support for users
- Configuring TACACS+ authentication support for users
- Configuring role-based authentication settings
- Configuring local users
- Configuring local users
- Configuring the LACP Timer
- Obtaining and using a new signed certificate
- Network setup
- Configuring MAC address ranges
- Creating a network access group
- Creating an Ethernet network
- Adding Ethernet networks to a network access group
- Creating an Ethernet network that uses network access groups
- Adding uplink ports to an Ethernet network
- Creating a shared uplink set
- Adding uplink ports to a shared uplink set
- Creating a network that uses a shared uplink set
- Creating multiple networks that use a shared uplink set
- Server VLAN Tagging Support
- Fibre Channel setup
- Serial number settings
- Server profile setup
- Creating server profiles
- Adding Ethernet network connections to a profile
- Adding iSCSI connections to a profile
- Adding FC fabric connections to a server profile
- Adding FCoE connections to a profile
- Adding a network access group to a profile
- Assigning a server profile to a device bay
- Configuring IGMP settings
- Configuring MAC cache failover settings
- Configuring network loop protection settings
- Configuring pause flood protection settings
- Hiding unused FlexNICs in a profile
- Server blade power on and power off guidelines
- General requirements for adding FC or FCoE connections
- Logging out of the CLI
- Common management operations
- Port status conditions
- Resetting the Virtual Connect Manager
- Basic configuration
- Support and other resources
- Acronyms and abbreviations
- Documentation feedback
- Index