Hua Xin Information Technology 20180700500 Robotic Vacuum Cleaner User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4023840
Application ID	6kgs97hWtq3jNbQWUlpROQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	58.26kB (728234 bits)
Date Submitted	2018-09-29 00:00:00
Date Available	2018-09-29 00:00:00
Creation Date	2018-09-26 17:47:17
Producing Software	Adobe Acrobat Pro 11.0.16 Paper Capture Plug-in
Document Lastmod	2018-09-26 18:12:11
Document Title	User manual

TESVDR
www.tesvor.com
Make Life Smarter and Easier
(1(:d1)
•••••
~·
.t}
'~--~'
111 '
111111
.,,,
ll&ill ll&ill
Importer: Tesvor, Shenzhen Tian You Intelligence Co., Ltd.
Address: 2/F Liangji Business Building, Donghuan lST Road,
Fukang Community, Longhua District, Shenzhen, China
Company Website: http://www.tesvor.com
Customer Contact: service@tesvor.com
Manufacturer: Shenzhen Hua Xin Information Technology Co., Ltd.
Address: Section A, 10/F, Block 1, No.7 Industrial Park, Yulu Community,
Yutang, Guangming New District, Shenzhen, China
( User Manual)
Make Life Smarter and Easier
1. Welcome 2. Safety Instructions
3. Product Components
Greetings from Tesvor!
Thank you for purchasing Tesvor smart cleaning
robot.
We hope that our product will bring you a smarter
and more convenient lifestyle!
If you encounter any problem not mentioned
herein, please contact: service@tesvor.com
O·
•••••
·I~
I·
'~--~'
1111
For more details, please visit our official website:
http://www.tesvor.com
111111
1111
!&ill !&ill
TESVDR
X500 Smart Robot Vacuum
The image above is for illustration purposes only; the actual product may differ.
Our company reserves the right to upgrade products without notice.
FCC warning:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Modification: Any changes or modifications not expressly approved by the grantee of this device could
void the user’s authority to operate the device.
RF radiation exposure statement
The Robotic Vacuum Cleaner complies with FCC RF radiation exposure limits set forth for an
uncontrolled
environment. Caution: To maintain the compliance with the FCC’s
RF exposure guideline, install the Robotic Vacuum Cleaner at least 7.9” (20 cm) from ALL persons. The
transmitter of this device must not be co-located or operating in conjunction with any other
antenna or transmitter.
1. Welcome 2. Safety Instructions
3. Product Components
Before using this product, please read the safety instructions
below and follow all the routine safety precautions.
Please read the Instructions carefully and keep them for future reference.
Any operation that does not conform to the Instructions may cause damage
to the product.
( Safety Considerations of Main Body and Accessories )
4.lnstructions for Use 5.Product Maintenance 6. Common Faults
6. Common Faults
Faults
Possible Reasons
Solutions
The
robot
cannot
be
charged.
1.The electrodes between the main
body and the charging base are not
contacted properly.
2.The charging base is switched off
while the robot is switched on,
which leads to the loss of power.
1.Make sure that the electrodes
between the main body and the
charging base are properly
contacted.
2.Keep charging the robot when it
is not working to better prepare
for next cleaning assignment.
The robot is
stuck during
work.
The robot may be stuck by wires/cables on the ground, hanging
curtains or obstacles around the
carpets.
The robot will try to get itself out
automatically. However, please
help it manually if it fails.
The robot
goes back to
recharge
without
finishing the
cleaning
work.
1.The robot detects that the power
may not be enough and automatically goes back to recharge.
2.The robot works at different
speeds on different floor types. For
example, it works longer on wood
floors than on carpets.
1.Charge the robot.
2.The length of working time
varies because of the complexities
of room environments, the
amount of garbage and different
cleaning modes.
The robot
does not
perform
cleaning
work
automatically
as scheduled.
1.The robot is not switched on and
the robot cannot perform cleaning
work as scheduled when it is
powered off.
2.The power level of the robot is too
low to work.
3.The robot is stuck or twined by
obstacles.
1.Turn on the robot.
2.Keep charging the robot when it
is not working to better prepare
for next cleaning assignment.
3.Turn off the robot and clean the
dust box. Then turn over the robot
to clean its components, such as
wheels and side brushes.
Remote
control
malfunctions.
(effective
range: 16.3
ft).
1.The remote control is short of or
out of power.
2.The robot is short of or out of
power.
3.The infrared ray is blocked
because the infrared emitter on the
remote control or the infrared
receiver on the robot is contaminated.
4.lnterference emitted by other
devices that exist nearby.
1.Change the batteries and install
the batteries correctly.
2.Make sure that the robot is
switched on with enough power
for operation.
3.Wipe the infrared emitter on the
remote control or the infrared
receiver on the robot with a clean
cotton cloth.
4.Avoid using the remote control
near other infrared devices.
& Warning
01.Do not disassemble, repair or refit the product without authorization;
otherwise it may damage the product or pose a hazard.
02.Do not use the product in an environment with risk of fire or explosion.
03.This product can only use the original power adapter; otherwise the product may be damaged or catch on fire.
04.Do not stand or sit on this product; doing so could damage the product or
cause it to fall over.
OS.When the metal part of the power plug is dusty, please wipe it with a dry
cloth.
06.The power adapter is applied to a 100-240V AC voltage. Please plug into
the socket properly and keep away from children.
07.Do not wash or soak the main body and electronic accessories in water;
otherwise the product may be damaged by a short circuit.
08.Do not damage, load weight on, heat, pull, or bend it.
09.During cleaning, please pay attention to the safety of toddlers and elders
at home to avoid tripping, and please do not touch the wheel and side
brush to avoid injury. (Please pay special attention to toddlers).
10.This product is for home use. Please do not use it outdoors.
11.Do not allow metal and conductive materials to come in contact with the
battery; doing so may cause a short circuit.
CD Attention
01.Do not touch the product with wet hands; doing so may cause an electric
shock.
02.Please do not place the product in places where it could easily fall, such as
tables, chairs, high platforms in room, etc.
03.The product has a sophisticated design and should be protected from
CD
Note: If the above methods cannot solve the problem, please reboot the robot.
If the problem cannot be solved by reboot, please contact service@tesvor.com
1. Welcome 2. Safety Instructions
3. Product Components
5 .5 Replaceable Modules
c____
=~-------- Glass Panel
~:::::~*'>------- Shell
Left Side Wheel Component
------({)II
•Q,__- - - - -Side Brush
Assembly
~Right Side Wheel
Component
ai.dJ---- Fan Components
------. -" 'rPI-" " ...+..,.
Left Side Brush
Right Side Brush
-----0
~~-- Universal Wheel
Components
Dust Box Components ~
~---- Rolling Brush
Components
~>----------- Battery
Battery Cover
Range of application:
The product is suitable for cleaning houses, hotel rooms, and small
offices and provides good cleaning for various carpets (with carpet
wool length less than 0.6 inch), wooden floors, hard floors, floor tiles,
etc.
4.lnstructions for Use 5.Product Maintenance 6. Common Faults
long-term exposure to sunlight.
04.Please do not use the product in humid environments, such as bathrooms.
OS.Please do not place the product near cigarette butts, lighters or other
open fires.
06.Please clean the product after the end of charging.
07.Please turn off the power switch on the side of the robot when the product is out of service for a long time.
08.Please check carefully to see if the power adapter is connected to the
socket prior to use, to avoid damage to the robot.
09.Before using the product, please remove all vulnerable items on the floor,
such as glass, lamps, and items such as wires and curtains that may entangle with the side brush and suction passages.
10.When the dust box is full, please empty the garbage before using again.
11.Please do not use the robot to clean construction waste.
12.The operating temperature of the product ranges from 0 degrees Celsius
to 40 degrees Celsius; please do not use it in a high temperature environment.
13.Before the product is scrapped, please remove the battery from the robot.
When you remove the battery, please ensure that the product is not
connected to a power supply. Please recycle the battery safely for
environmental protection.
( Safety Considerations for Rechargeable Battery)
Danger
01.Always use a dedicated battery adapter to avoid leakage, heating or
rupture.
02.Do not short-circuit the battery or remove the battery; doing so may cause
leakage, heating or rupture.
03.Do not transport or preserve with necklaces, hairpins and other metal
objects; doing so may lead to short circuit, resulting in leakage, heating or
rupture.
04.Do not burn or heat the battery; doing so may cause leakage, heating or
rupture.
1. Welcome 2. Safety Instructions
CD
3. Product Components
Attention
01.lf abnormal overheating is discovered during charging, stop using it immediately to avoid leakage, heating or rupture.
02.To prolong the service life of the battery, please remove the battery and
place it in a cool, dry environment if it is out of service for a long time; this
will avoid leakage, heating or rupture.
03.Do not soak it in water or let it come into contact with any liquid; otherwise it may cause leakage, heating or rupture.
04.Be sure to stop using it immediately in case of any exception (e.g. discoloration or deformation), to avoid leakage, heating or rupture.
OS.Always use tape to insulate the battery's electrode when recycling or
disposing of it.
& Warning
01.When skin or clothing is exposed to the battery electrolyte, immediately
wash with clean water to avoid inflammation of skin, etc.
02.Do not use the rechargeable battery on other devices. This battery is only
suitable for Tesvor smart sweeping robots.
03.lf the battery's outer box is found to be deformed and expanded, or
leakage of electrolytes is found, do not charge or continue to use to avoid
danger.
04.Do not throw or inflict a strong impact on the battery; doing so may cause
leakage, heating or rupture.
OS.Do not disassemble the battery pack; doing so may cause battery rupture
and electrolyte outflow, leading to fire, explosion and other dangers.
06.This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved.
07.Children shall not play with the appliance.
OS.Cleaning and user maintenance shall not be made by children without
supervision.
09.This appliance contains batteries that are only replaceable by skilled
persons.
4.lnstructions for Use 5.Product Maintenance 6. Common Faults
5 .4 Maintenance of Other Components
l l ] u \ \ - - - - sensor
@11~~1~®
Use the cleaning tools or a dry soft cloth to periodically clean the
charging plate of robot chassis and the sensor window.
Use a cleaning tool or soft cloth to clean the charging base terminal.
1. Welcome 2. Safety Instructions
3. Product Components
5. 3 Maintenance of Rolling Brush Components
4.lnstructions for Use 5.Product Maintenance 6. Common Faults
10.WARNING: For the purposes of recharging the battery, only use the
detachable supply unit provided with this appliance.
11.The power supply must be removed from the socket-outlet before cleaning or maintaining the appliance.
12.The battery must be removed from the appliance before it is scrapped.
13.The appliance must be disconnected from the supply mains when removing the battery.
14.The battery should be safely disposed off.
15.How to remove the battery:
(,~~~~~~-O_p_e_n_t_he~ro_l_lin_g~b-ru_s_h_c_o_m_p_o_n_e_n_ts_.~~~~~~)
CD Take out two screws on the battery cover with a screw driver.
@Take out the battery cover.
®Take out the battery and unplug the electric wires to remove the battery.
In addition, you can get our instructions by emailing to
service@tesvor.com.
Remove the rolling brush shaft and clean off any debris and hair.
1. Welcome 2. Safety Instructions
3. Product Components
4.lnstructions for Use 5.Product Maintenance 6. Common Faults
3 .1 Names of Parts
Main Body
Charging Base
Cover the dust box and attach it to the main body.
Remote Control
(2 *AAA Batteries REQUIRED
but NOT INCLUDED)
Power Adapter
Cleaning Tool
Side Brushes
High-effective Filter/Sponge
While the accessories provided for some models are slightly different,
they are subject to the actual product.
1. Welcome 2. Safety Instructions
4.lnstructions for Use 5.Product Maintenance 6. Common Faults
3. Product Components
CD
Dry the dust box and filter components. Keep them dry to
ensure a longer service life.
@After the pre-filter is used for 15-30 days, it should be washed
once.
CID The maximum service life of the high-efficient filter is 3 months.
Main Body)
(~~~~~-1_._B_u_m_p_e_r~~~~-2_._C_o_n_tr_ol_b_u_tt_o_n~~~~---)
2~~~~~~~~~-1
~----------3
~ +-"""------4
<-++-+- - - -
q~~~~::-+---6
- -+---.,__- - - - 7
CD Reinstall the pre-filter and high-efficient filter in the dust box.
@Before installing the filter, make sure that the high-efficient filter
and the pre-filter are dry.
CID Do not expose the high-efficient filter and the pre-filter to
sunlight.
Main Body)
!.Universal wheel 2.Charging shrapnel 3.Side brush 4.Battery cover
5.Cincture
6. Rolling brush components
7. Dust box
1. Welcome 2. Safety Instructions
3. Product Components
4.lnstructions for Use 5.Product Maintenance 6.Common Faults
(Main Body)
1. DC power jack
2. Power switch
3. Dust box release button
f--- - - - - - 3
Open the high-efficient net cover, and remove the high-efficient
filter and filter sponge. It is not recommended to wash the
high-efficient filter with water. Please pat off the debris carefully.
~~:i-------4
~H-~P-F-------5
(Dust Box)
1. Pre-filter
2. High-effective filter
3.Filter sponge
4.Dust box
( 5. Dust box cover)
3 ------ht-------'i~--1-----i
c-~~~~~~w_a_s_h_t_h_e_d_u_st_b_o_x_a_n_d_p_re_-_fi_lte_r_.~~~~~--)
( Charging base)
1.Charging indicator
2.DC power jack
3. Charging terminal
1. Welcome 2. Safety Instructions
3. Product Components
4.lnstructions for Use 5.Product Maintenance 6.Common Faults
3. 2 Product Specifications
(Structure Type)
Diameter of main body
330mm
Thickness of main body
Net weight of main body
75mm
3.0 kg
( Electronic Type)
Dump all debris from the dust box into the garbage.
Voltage
Battery capacity
Main body button type
14.4 v
2500 mAh
LED button
( Accessory Type )
Dust box capacity
Cleaning modes
600ml
Plan Cleaning I Edge Cleaning
( Process Parameters )
Charging Type
(,~~~~~~~~R_e_m_o_v_e_th_e~p_re_-f_il_te_~~~~~~~~~--)
Operating duration
Charging duration
Manual/Automatic
<= 100 min
240-360 min
The ambient temperature range for storage of the product is 0-40 degrees Celsius
1. Welcome 2. Safety Instructions
3. Product Components
3.3 Product Characteristics
Humanized Design
It is simple to operate. You can control the robot only by pressing the Control
button! Follow the prompt tone to operate the robot!
4.lnstructions for Use 5.Product Maintenance 6.Common Faults
5 .1 Side Brush Cleaning and Replacement
Check the side brush's condition frequently to see if it has been
damaged or entangled with other objects. Clean the side brush
with a cleaning tool or cloth. When the side brush is damaged and
cannot be used, please replace it as soon as possible. Land R
correspond to each other.
5. 2 Cleaning of Dust Box and Filter
Dust box can be washed with water
The dust box and the pre-filter can be directly flushed with water without too much
labor, which can avoid secondary pollution caused by dust flying!
Press the release button on the dust box to remove it.
1. Welcome 2. Safety Instructions
3. Product Components
•
4.lnstructions for Use S.Product Maintenance 6.Common Faults
4.1 Remote Control lnltnlcttons
( Cleaning Modes )
ee:ee ~I--
lJU1
· + - - - -Return for Auto
Charging
Plan Cleanlng
The robotwlll perform the smart Plan Oeanlng
according to the room environment.
Eda• Cleaning
Th~ nibot will dean alons the lonse,rt edge of
Display Screen
M - + - - - - Direction
L.:!,cf----t----<;:IOCIC Settings
Preset
-------t--
YI----
Edge Cleaning
When the robot Is In the llkfnlty of me charglns base and the 111rwal pl'OU!Ctlon
wall, It may not be able to distinguish the lnstructSons Issued by the remote control.
If you do not use the remote control for a lon,g time, please remDVe the battery.
the room.
llM Plan Cleaning button
At any cleaning mode, press this button to enter the Plan Oeanlng mode.
lay1lashes Icon~.
N. the ~set mode, press this buttrln ID save the data and exit the preset mode,
and the dlsplil'( will atways dlsplay the lconlt'!I.
#.the ~set mode, press the preset button for 3S to i:anCl!I the preset function,
and the dlsplil'(ed lcion lf!l wlll dlsippear.
Edge Cleaning button
P~ this button to enterthe £dp aeanlng mode.
'91B81l
Dlsplay preset1fme
<911181
Display dock llme
-ti: At Ille p..-t daanl"'11 mode, Qlf 01u1n11lont wtll be prnmpci!ld to aintrnn.
©Press the Preset button so that the robot enters the Preset mode
and set the preset time on the remote control.
®Aftar setting le completed, press the Power on/otr button or Preset
button to complelB the setting of Preset Duling the setting, you
need to faoe the robot.
(J)H you need to cancel the presellfng, you can pras1> the Preset
button for 3 seconds.
1. Welcome 2. Safety Instructions
3. Product Components
•
4.lnstructions for Use 5.Product Maintenance 6. Common Faults
®
,.,
4. 2 Operating Instructions
Placement of the Charging Base )
ff, ••• lli1 ,,,
Charging Instructions
iii
m•
._,.,.,.
01.The battery should be repaired and replaced by the aftersales department.
02.For the very first operation, please let the robot run out of power.
03.When the robot is charged, the Control button will flash a green lamp in
a circular manner.
04.lf the robot is out of service for a long time, please turn off the power
switch.
OS.Please charge the robot as soon as possible after the battery is used up.
06.The product can only use the power adapter and charger provided by the
factory.
07.Please charge the robot for 12 hours for the first time of operation.
When the charge is done, the Control button light turns off.
Place the seat flat against the wall. Do not place any objects within
3.3 ft to the left I right and 6.6 ft to the front, and do not place any
mirrors or other reflective objects within this distance.
( Preset cleaning )
You can set the robot by pressing the Time Settings button on the
remote control to the current U.S. time, and press OK button.
Switch on the robot, which makes the Control button green, and
enter the Select mode.
If the robot is not active within 3 minutes, the robot will enter Sleep
mode.
1. Welcome 2. Safety Instructions
3. Product Components
(Charging Modes)
4.lnstructions for Use 5.Product Maintenance 6. Common Faults
(Switching Modes)
At any mode, select the Return for Auto Charging button on the
remote control to make the robot return for charging.
Startup
(Auto Charging)
01.Make sure the power switch on the side of the robot is turned on.
02.Press the Control button or the Cleaning mode on the remote control to start
the robot.
Pause
The pause function is to switch the robot from the operating mode to the selected mode, and the robot can be paused by the following operations:
01.Press the Control button on the robot to pause the robot.
02.Press the power on/off button on the remote control to pause the robot.
Sleep
When cleaning is completed or the battery is too low, the robot will
automatically start finding the charging base to charge itself.
Please keep the charging base energized, otherwise the machine
will not be able to find the charging base.
Sleep mode means that the robot is stopped and the indicator light is off.
If the robot is not active within 3 minutes, the robot will enter Sleep mode
automatically.
Note: If the robot is out of service for a long time, please turn off the power
switch.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2018:09:26 17:47:17+08:00
Modify Date                     : 2018:09:26 18:12:11+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2018:09:26 18:12:11+08:00
Format                          : application/pdf
Document ID                     : uuid:8848b73c-55d5-4a76-98ba-6b60588c4385
Instance ID                     : uuid:c5059fe9-250d-4469-ab69-7b836241250f
Producer                        : Adobe Acrobat Pro 11.0.16 Paper Capture Plug-in
Page Count                      : 16

EXIF Metadata provided by EXIF.tools