Huawei Technologies AP5010DNAGN Wireless LAN Access Point User Manual Product Description

Huawei Technologies Co.,Ltd Wireless LAN Access Point Product Description

20. User manual 3_AP5010DNAGN

AP5010DN-AGN Wireless LAN Access PointV200R002C00Product DescriptionIssue 01Date 2012-10-31HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without prior writtenconsent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.All other trademarks and trade names mentioned in this document are the property of their respective holders. NoticeThe purchased products, services and features are stipulated by the contract made between Huawei and thecustomer. All or part of the products, services and features described in this document may not be within thepurchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,and recommendations in this document are provided "AS IS" without warranties, guarantees or representationsof any kind, either express or implied.The information in this document is subject to change without notice. Every effort has been made in thepreparation of this document to ensure accuracy of the contents, but all statements, information, andrecommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd.Address: Huawei Industrial BaseBantian, LonggangShenzhen 518129People's Republic of ChinaWebsite: http://enterprise.huawei.comIssue 01 (2012-10-31) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.i
Contents1 Product Orientation and Characteristics...................................................................................12 Product Structure...........................................................................................................................53 Functions and Features.................................................................................................................74 Technical Specifications.............................................................................................................10AP5010DN-AGN Wireless LAN Access PointProduct Description ContentsIssue 01 (2012-10-31) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.ii
1 Product Orientation and CharacteristicsProduct OrientationThe AP5010DN-AGN is a standard indoor dual-band 2x2 MIMO access point (AP) that supports2.4 GHz and 5 GHz frequency bands. It complies with IEEE 802.11a/b/g/nsupports 2.4 GHzand 5 GHz frequency bands, and has enhanced coverage performance and protection capabilities.It supports wireless bridging, complies with IEEE 802.11a/b/g/n,connects a large number ofusers, and works as a Fit AP. The AP5010DN-AGN has the following advantages:lHigh reliabilitylHigh securitylSimple network deploymentlAutomatic AC discovery and configurationlReal-time management and maintenanceThe AP5010DN-AGN is recommended for use in buildings with a simple structure, small area,a high density of users, and require a high capacity, for example, small-scale meeting rooms,bars, and entertainment places. The AP5010DN-AGN APs can be flexibly deployed in theseplaces and work in both Fit AP and bridge mode.The AP5010DN-AGN is for use in Fit AP and bridge networking scenarios.AP5010DN-AGN Wireless LAN Access PointProduct Description 1 Product Orientation and CharacteristicsIssue 01 (2012-10-31) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.1
Figure 1-1 Fit AP networkingAP nAP1 ……NMSACAuthentication systemSwitchManagement channel between NMS and ACManagement channel between the AC and the AP and data channel Where data flows are encapsulated with CAPWAPChannel where data flows are not encapsulated with CAPWAPBusiness usersResidential usersWLAN teminalIn this networking, the AP5010DN-AGN functions as a Fit AP that provides only dataforwarding functions. The AC is responsible for user access, authentication, AP management,and configurations of security protocols, routing, and QoS.Figure 1-2 WDS networking (point-to-point)AP 1 AP 2LAN Segment 1LAN Segment 2AP5010DN-AGN Wireless LAN Access PointProduct Description 1 Product Orientation and CharacteristicsIssue 01 (2012-10-31) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.2
Figure 1-3 WDS networking (point-to-multipoint)AP 2 AP 1 AP 3AP 4LAN Segment 1LAN Segment 2LAN Segment 3LAN Segment 4In this networking, the AP5010DN-AGN connects two or more independent wired or wirelessLANs through wireless links to realize communication between the LANs. In a WirelessDistribution System (WDS), the AP5010DN-AGN supports point-to-point, point-to-multipointnetworking modes. The AP implements wireless bridging and access functions using 5 GHz and2.4 GHz frequency bands.Product CharacteristicsThe AP5010DN-AGN has the following characteristics on the WLAN.ProductCharacteristicsDescriptionHighly reliablewireless accesslComplies with IEEE 802.11 b/g/n.lSupports2x2 MIMO, and provides a maximum rate of 300 Mbit/sfor each spatial stream.lUses Wi-Fi Multimedia (WMM) to implement priority schedulingbased on the service type (voice, video, or data), and supportspriority mapping on the air interface and wired interface.lSupports wired link integrity check.lSupports load balancing.lSupports roaming without service interruptions.lSupports AC Dual-Link Backup.lSupports the beamforming technique.lUses the latest 802.11n chip to provide higher performance andwider coverage.lHas a strong coverage capability.Comprehensiveuser accesscontrol capabilitylSupports access control lists (ACLs) and user access controls basedon user group policies.lProvides per-user bandwidth management.lSupports user isolation policies.lSupports AC authentication.AP5010DN-AGN Wireless LAN Access PointProduct Description 1 Product Orientation and CharacteristicsIssue 01 (2012-10-31) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.3
ProductCharacteristicsDescriptionHigh security The AP5010DN-AGN supports multiple authentication and encryptionmodes and provides various measures to enhance system security:lWired Equivalent Privacy (WEP)lWi-Fi Protected Access (WPA)/WPA2lWLAN Authentication and Privacy Infrastructure (WAPI)l802.1XlDetection of unauthorized APsFlexiblenetworking andenvironmentadaptabilitylFor use in Fit AP and WDS networking scenarios.lAutomatically selects the transmission rate, channel, and transmitpower to adapt to multiple radio environments and limit interferencein real time.lAdjusts bandwidth allocation based on the number of users and radioenvironment.Simple devicemanagement andmaintenancelAutomatically discovers ACs and loads the AC (plug-and-play)configuration.lSupports batch upgrade.lMonitored by the NMS in real time. You can remotely configureAPs and locate faults on APs using the NMS.lSupports the Link Layer Discovery Protocol (LLDP) to implementautomatic link discovery and obtain the network topology.AP5010DN-AGN Wireless LAN Access PointProduct Description 1 Product Orientation and CharacteristicsIssue 01 (2012-10-31) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.4
2 Product StructureAppearanceFigure 2-1 shows the appearance of the AP5010DN-AGN.NOTEThe actual device appearance may differ from the figure, but the appearance does not affect deviceFigure 2-1 Appearance of the AP5010DN-AGNPortsFigure 2-2 shows ports on the AP5010DN-AGN.Figure 2-2 Ports of the AP5010DN-AGN4 2 1351. Console port.2. ETH/PoE: 10/100/1000M port, which connects to the Ethernet. The port can connect to aPoE switch or a PoE power source to receive power.3. Default: restores factory settings.AP5010DN-AGN Wireless LAN Access PointProduct Description 2 Product StructureIssue 01 (2012-10-31) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.5
4. Power input port: 12 V DC.5. Lock port: protects the AP5010DN-AGN against theft.LED IndicatorsType ColorFrequencyDescriptionDefaultstatusGreenSteady onWhen the system is being powered on, the indicator is steadygreen. When the system software is running, the indicator statusdepends on the software running result.RunningGreen0.5HzThe system is running properly, the Ethernet connection is correct,and STAs are associated with the AP.0.2HzThe system is running properly, and the Ethernet connection iscorrect. However, no user connects to the AP, and the system isin low-power state.Alarm Green4 Hz The CAPWAP link is disconnected during an upgrade.Error Red Steady onA fault that affects services has occurred and cannot be rectifiedautomatically. For example, the system fails to load the DRAM orsystem software. The fault needs to be rectified manually. AP5010DN-AGN Wireless LAN Access PointProduct Description 2 Product StructureIssue 01 (2012-10-31) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.6
3 Functions and FeaturesFunctions and Features Supported by the AP5010DN-AGNTable 3-1 FeaturesFeatures DescriptionWLANfeatureslCompliance with IEEE 802.11a/b/g/n, providing a maximum rate of 300Mbit/s216 Mbit/s for each radiolMaximum ratio combining (MRC)lMaximum-likelihood detection (MLD)lAggregate data units, including A-MPDU (Tx/Rx) and A-MSDU (Rxonly)l802.11 dynamic frequency selection (DFS)lShort GI in 20 MHz and 40 MHz modeslPriority mapping and packet scheduling based on a Wi-Fi Multimedia(WMM) profile to implement priority-based data processing andforwardinglAutomatic and manual rate adjustment (the rate is adjusted automaticallyby default)lWLAN channel management and channel rate adjustmentNOTEFor details about WLAN channel management, see the Country codes & Channelscompliance status.lAutomatic channel scanning (the AP5010DN-AGN scans channels usedby other APs, measures their interference, and reports the scanning resultto the AC to trigger channel adjustment)lService set identifier (SSID) hidinglSignal sustain technology (SST)lUnscheduled automatic power save delivery (U-APSD)lControl and Provisioning of Wireless Access Points (CAPWAP)lAutomatic AC discoveryAP5010DN-AGN Wireless LAN Access PointProduct Description 3 Functions and FeaturesIssue 01 (2012-10-31) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.7
Features DescriptionNetworkfeatureslCompliance with IEEE 802.3ulPorts: Auto-negotiation of the rate and duplex mode and automaticswitching between the Media Dependent Interface (MDI) and MediaDependent Interface Crossover (MDI-X) modelVLAN assignment based on SSIDslVLAN aggregation on uplink Ethernet portsl4093 VLAN IDs (1-4093) and 16 virtual APs (VAPs)lUplink ports in tagged and untagged modelDHCP clientlPPPoE dialuplCentralized data forwarding and local data forwardinglSTA isolation in the same VLANlACLlLLDPlUninterrupted service forwarding upon CAPWAP channeldisconnection in direct forwarding modelUniform authentication on an AClDual-AC backupQoS features lPriority mapping and packet scheduling based on WMM profiles toimplement priority-based data processing and forwardinglWMM parameter management for each radio frequencylWMM power savinglPriority mapping for upstream packets and flow-based mapping fordownstream packetslQueue mapping and schedulinglUser-based bandwidth limitinglAdaptive bandwidth allocation (the system dynamically adjustsbandwidth based on the number of users and radio environment)SecurityfeatureslOpen system authenticationlWEP authentication/encryptionlWPA/WPA2 authentication and encryptionl802.1x authentication and encryptionlWAPI authentication and encryptionAP5010DN-AGN Wireless LAN Access PointProduct Description 3 Functions and FeaturesIssue 01 (2012-10-31) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.8
Features DescriptionMaintenancefeatureslAP management and maintenance by the AClPlug-and-play: automatic AC discovery and automatic configurationloadinglBatch upgradelDebugging using Telnet and the serial interfacelReal-time configuration monitoring and fast fault location by using theNMSlSystem status alarmAP5010DN-AGN Wireless LAN Access PointProduct Description 3 Functions and FeaturesIssue 01 (2012-10-31) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.9
4 Technical SpecificationsSpecificationsTable 4-1 Specifications of the AP5010DN-AGNItem DescriptionTechnical specifications Dimensions (H x W x D) 50 mm x 180 mm x 180 mmWeight 0.4 kgSystem memory l128 MB DRAMl32 MB flash memoryPower specifications Power input lDC 12V±10%lPOE Power: -48V DClPoE function in compliancewith IEEE 802.3af and 802.3atMaximum powerconsumption9.5 WNOTEThe maximum power consumptiondepends on local laws.Environment parameters Operating temperature -10℃ to +50℃Storage temperature -40℃ to +70℃Humidity 5% to 95% (non-condensing)Waterproof grade IP31Altitude –60 m to 4000 m AP5010DN-AGN Wireless LAN Access PointProduct Description 4 Technical SpecificationsIssue 01 (2012-10-31) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.10
Antenna ParametersTable 4-2 Antenna parameters of the AP5010DN-AGNItem DescriptionAntennatypeBuilt-in antennaAntennagain2.4GHz: 4 dBi5GHz: 5 dBiMaximumnumber ofconcurrentusers≤ 128Maximumtransmitpower17 dBmlYou can adjust the transmit power from the maximum to 15 dBm, with astep of 1 dBm.NOTEActual transmit power depends on local laws and regulations.Maximumnumber ofnon-overlapping channels2.4 GHz802.11b/gl20MHz: 3802.11nl20MHz: 35 GHz802.11al20MHz: 21802.11nl20MHz: 21l40MHz: 9Channelrate802.11b: 1, 2, 5.5, and 11 Mbit/s802.11g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s802.11n data rate (2.4 GHz and 5 GHz)GI=800 ns GI=400ns20 MHz (Mbit/s) 40 MHz (Mbit/s) 20 MHz (Mbit/s) 40 MHz (Mbit/s)6.5 @ MCS0 13.5 @ MCS0 7.2 @ MCS0 15 @ MCS013 @ MCS1 27 @ MCS1 14.4 MCS1 30 MCS119.5 @ MCS2 40.5 @ MCS2 21.7 @ MCS2 45 @ MCS226 @ MCS3 54 @ MCS3 28.9 @ MCS3 60 @ MCS339 @ MCS4 81 @ MCS4 43.3 @ MCS4 90 @ MCS452 @ MCS5 108 @ MCS5 57.8 @ MCS5 120 @ MCS558.5 @ MCS6 121.5 @ MCS6 65 @ MCS6 135 @ MCS665 @ MCS7 135 @ MCS7 72.2 @ MCS7 150 @ MCS7AP5010DN-AGN Wireless LAN Access PointProduct Description 4 Technical SpecificationsIssue 01 (2012-10-31) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.11
Item Description13 @ MCS8 27 @ MCS8 14.4 @ MCS8 30 @ MCS826 @ MCS9 54 @ MCS9 28.9 @ MCS9 60 @ MCS939 @ MCS10 81 @ MCS10 43.3 @ MCS10 90 @ MCS1052 @ MCS11 108 @ MCS11 57.8 @ MCS11 120 @ MCS1178 @ MCS12 162 @ MCS12 86.7 @ MCS12 180 @ MCS12104 @ MCS13 216 @ MCS13 115.6 @ MCS13 240 @ MCS13117 @ MCS14 243 @ MCS14 130 @ MCS14 270 @ MCS14130 @ MCS15 270 @ MCS15 144.4 @ MCS15 300 @ MCS15 NOTEModulation coding scheme (MCS) index: determines the spatial flow quantity,modulation, coding rate, and data rate.Guard interval (GI): indicates the period in nanoseconds the radio listens between packets.Receiversensitivity2.4 GHz802.11b (CCK)l-91 dBm @ 1Mb/sl-89 dBm @ 2Mb/sl-88 dBm @5.5 Mb/sl-85 dBm @ 11Mb/s2.4 GHz802.11g (non-HT20)l-89 dBm @ 6Mb/sl-88 dBm @ 9Mb/sl-85 dBm @ 12Mb/sl-83 dBm @ 18Mb/sl-80 dBm @ 24Mb/sl-76 dBm @ 36Mb/sl-71 dBm @ 48Mb/sl-70 dBm @ 54Mb/s5 GHz802.11a (non-HT20)l-89 dBm @ 6 Mb/sl-88 dBm @ 9 Mb/sl-85 dBm @ 12 Mb/sl-83 dBm @ 18 Mb/sl-80 dBm @ 24 Mb/sl-76 dBm @ 36 Mb/sl-71 dBm @ 48 Mb/sl-70 dBm @ 54 Mb/sAP5010DN-AGN Wireless LAN Access PointProduct Description 4 Technical SpecificationsIssue 01 (2012-10-31) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.12
Item Description2.4 GHz802.11n (HT20)l-83 dBm @MCS0/8l-80 dBm @MCS1/9l-78 dBm @MCS2/10l-75 dBm @MCS3/11l-71 dBm @MCS4/12l-67 dBm @MCS5/13l-66 dBm @MCS6/14l-65 dBm @MCS7/155 GHz802.11n (HT20)l-83 dBm @MCS0/8l-80 dBm @MCS1/9l-78 dBm @MCS2/10l-75 dBm @MCS3/11l-71 dBm @MCS4/12l-67 dBm @MCS5/13l-66 dBm @MCS6/14l-65 dBm @MCS7/155 GHz802.11n (HT40)l-80 dBm @ MCS0/8l-77 dBm @ MCS1/9l-75 dBm @ MCS2/10l-72 dBm @ MCS3/11l-68 dBm @ MCS4/12l-64 dBm @ MCS5/13l-63 dBm @ MCS6/14l-62 dBm @ MCS7/15 Standards CompliancelSafety standards–UL 60950-1–IEC 60950-1–EN 60950-1–GB 4943lRadio standards–ESTI EN 300 328–ESTI EN 301 893–RSS-210lEMC standards–EN 301.489–1–EN 301.489–17–ICES-003–YD/T 1312.2-2004–EN55022 (Class B)lIEEE standards–IEEE 802.11a/b/g–IEEE 802.11n–IEEE 802.11hAP5010DN-AGN Wireless LAN Access PointProduct Description 4 Technical SpecificationsIssue 01 (2012-10-31) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.13
–IEEE 802.11d–IEEE 802.11elSecurity standards–802.11i, Wi-Fi Protected Access 2 (WPA2), WPA–802.1x–Advanced Encryption Standards (AES), Temporal Key Integrity Protocol (TKIP)–EAP Type(s)lEnvironment standards–ETSI 300 019-2-1–ETSI 300 019-2-2–ETSI 300 019-2-3lEAP types–EAP-TLS/TTLS, PEAP, EAP-MD5, EAP-SIMlMultimedia–WMMTMAP5010DN-AGN Wireless LAN Access PointProduct Description 4 Technical SpecificationsIssue 01 (2012-10-31) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.14

Navigation menu