Huawei Technologies AP5010DNAGN Wireless LAN Access Point User Manual Product Description
Huawei Technologies Co.,Ltd Wireless LAN Access Point Product Description
Contents
20. User manual 3_AP5010DNAGN
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1853426 |
| Application ID | MDFcVzXe8WKaMiv/ymQJFQ== |
| Document Description | 20. User manual 3_AP5010DNAGN |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 56.81kB (710186 bits) |
| Date Submitted | 2012-12-05 00:00:00 |
| Date Available | 2013-03-12 00:00:00 |
| Creation Date | 2012-10-24 15:21:17 |
| Producing Software | Antenna House PDF Output Library 2.4.0 (Windows) |
| Document Lastmod | 2012-10-24 15:21:17 |
| Document Title | Product Description |
| Document Creator | XSL Formatter V4.1 R1 (4,1,2006,1206) for Windows |
| Document Author: | Huawei Technologies Co., Ltd. |
AP5010DN-AGN Wireless LAN Access Point V200R002C00 Product Description Issue 01 Date 2012-10-31 HUAWEI TECHNOLOGIES CO., LTD. Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://enterprise.huawei.com Issue 01 (2012-10-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP5010DN-AGN Wireless LAN Access Point Product Description Contents Contents 1 Product Orientation and Characteristics...................................................................................1 2 Product Structure...........................................................................................................................5 3 Functions and Features.................................................................................................................7 4 Technical Specifications.............................................................................................................10 Issue 01 (2012-10-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. ii AP5010DN-AGN Wireless LAN Access Point Product Description 1 Product Orientation and Characteristics Product Orientation and Characteristics Product Orientation The AP5010DN-AGN is a standard indoor dual-band 2x2 MIMO access point (AP) that supports 2.4 GHz and 5 GHz frequency bands. It complies with IEEE 802.11a/b/g/nsupports 2.4 GHz and 5 GHz frequency bands, and has enhanced coverage performance and protection capabilities. It supports wireless bridging, complies with IEEE 802.11a/b/g/n,connects a large number of users, and works as a Fit AP. The AP5010DN-AGN has the following advantages: High reliability High security Simple network deployment Automatic AC discovery and configuration Real-time management and maintenance The AP5010DN-AGN is recommended for use in buildings with a simple structure, small area, a high density of users, and require a high capacity, for example, small-scale meeting rooms, bars, and entertainment places. The AP5010DN-AGN APs can be flexibly deployed in these places and work in both Fit AP and bridge mode The AP5010DN-AGN is for use in Fit AP and bridge networking scenarios. Issue 01 (2012-10-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP5010DN-AGN Wireless LAN Access Point Product Description 1 Product Orientation and Characteristics Figure 1-1 Fit AP networking NMS Authentication system AC Switch AP1 AP n …… WLAN teminal Residential Business users users Management channel between NMS and AC Management channel between the AC and the AP and data channel Where data flows are encapsulated with CAPWAP Channel where data flows are not encapsulated with CAPWAP In this networking, the AP5010DN-AGN functions as a Fit AP that provides only data forwarding functions. The AC is responsible for user access, authentication, AP management, and configurations of security protocols, routing, and QoS. Figure 1-2 WDS networking (point-to-point) LAN Segment 1 AP 1 AP 2 LAN Segment 2 Issue 01 (2012-10-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP5010DN-AGN Wireless LAN Access Point Product Description 1 Product Orientation and Characteristics Figure 1-3 WDS networking (point-to-multipoint) LAN Segment 2 AP 2 LAN Segment 1 LAN Segment 3 AP 1 AP 3 LAN Segment 4 AP 4 In this networking, the AP5010DN-AGN connects two or more independent wired or wireless LANs through wireless links to realize communication between the LANs. In a Wireless Distribution System (WDS), the AP5010DN-AGN supports point-to-point, point-to-multipoint networking modes. The AP implements wireless bridging and access functions using 5 GHz and 2.4 GHz frequency bands. Product Characteristics The AP5010DN-AGN has the following characteristics on the WLAN. Product Characteristics Description Highly reliable wireless access l Complies with IEEE 802.11 b/g/n. l Supports2x2 MIMO, and provides a maximum rate of 300 Mbit/s for each spatial stream. l Uses Wi-Fi Multimedia (WMM) to implement priority scheduling based on the service type (voice, video, or data), and supports priority mapping on the air interface and wired interface. l Supports wired link integrity check. l Supports load balancing. l Supports roaming without service interruptions. l Supports AC Dual-Link Backup. l Supports the beamforming technique. l Uses the latest 802.11n chip to provide higher performance and wider coverage. l Has a strong coverage capability. Comprehensive user access control capability l Supports access control lists (ACLs) and user access controls based on user group policies. l Provides per-user bandwidth management. l Supports user isolation policies. l Supports AC authentication. Issue 01 (2012-10-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP5010DN-AGN Wireless LAN Access Point Product Description 1 Product Orientation and Characteristics Product Characteristics Description High security The AP5010DN-AGN supports multiple authentication and encryption modes and provides various measures to enhance system security: l Wired Equivalent Privacy (WEP) l Wi-Fi Protected Access (WPA)/WPA2 l WLAN Authentication and Privacy Infrastructure (WAPI) l 802.1X l Detection of unauthorized APs Flexible networking and environment adaptability l For use in Fit AP and WDS networking scenarios. l Automatically selects the transmission rate, channel, and transmit power to adapt to multiple radio environments and limit interference in real time. l Adjusts bandwidth allocation based on the number of users and radio environment. Simple device management and maintenance l Automatically discovers ACs and loads the AC (plug-and-play) configuration. l Supports batch upgrade. l Monitored by the NMS in real time. You can remotely configure APs and locate faults on APs using the NMS. l Supports the Link Layer Discovery Protocol (LLDP) to implement automatic link discovery and obtain the network topology. Issue 01 (2012-10-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP5010DN-AGN Wireless LAN Access Point Product Description 2 Product Structure Product Structure Appearance Figure 2-1 shows the appearance of the AP5010DN-AGN. NOTE The actual device appearance may differ from the figure, but the appearance does not affect device Figure 2-1 Appearance of the AP5010DN-AGN Ports Figure 2-2 shows ports on the AP5010DN-AGN. Figure 2-2 Ports of the AP5010DN-AGN 4 3 1. Console port. 2. ETH/PoE: 10/100/1000M port, which connects to the Ethernet. The port can connect to a PoE switch or a PoE power source to receive power. 3. Default: restores factory settings. Issue 01 (2012-10-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP5010DN-AGN Wireless LAN Access Point Product Description 2 Product Structure 4. Power input port: 12 V DC. 5. Lock port: protects the AP5010DN-AGN against theft. LED Indicators Issue 01 (2012-10-31) Type Col or Freq uenc Description Default status Gre en Stead y on When the system is being powered on, the indicator is steady green. When the system software is running, the indicator status depends on the software running result. Runnin Gre en 0.5 Hz The system is running properly, the Ethernet connection is correct, and STAs are associated with the AP. 0.2 Hz The system is running properly, and the Ethernet connection is correct. However, no user connects to the AP, and the system is in low-power state. Alarm Gre en 4 Hz The CAPWAP link is disconnected during an upgrade. Error Red Stead y on A fault that affects services has occurred and cannot be rectified automatically. For example, the system fails to load the DRAM or system software. The fault needs to be rectified manually. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP5010DN-AGN Wireless LAN Access Point Product Description 3 Functions and Features Functions and Features Functions and Features Supported by the AP5010DN-AGN Table 3-1 Features Features Description WLAN features l Compliance with IEEE 802.11a/b/g/n, providing a maximum rate of 300 Mbit/s216 Mbit/s for each radio l Maximum ratio combining (MRC) l Maximum-likelihood detection (MLD) l Aggregate data units, including A-MPDU (Tx/Rx) and A-MSDU (Rx only) l 802.11 dynamic frequency selection (DFS) l Short GI in 20 MHz and 40 MHz modes l Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding l Automatic and manual rate adjustment (the rate is adjusted automatically by default) l WLAN channel management and channel rate adjustment NOTE For details about WLAN channel management, see the Country codes & Channels compliance status. l Automatic channel scanning (the AP5010DN-AGN scans channels used by other APs, measures their interference, and reports the scanning result to the AC to trigger channel adjustment) l Service set identifier (SSID) hiding l Signal sustain technology (SST) l Unscheduled automatic power save delivery (U-APSD) l Control and Provisioning of Wireless Access Points (CAPWAP) l Automatic AC discovery Issue 01 (2012-10-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP5010DN-AGN Wireless LAN Access Point Product Description Features Description Network features l Compliance with IEEE 802.3u 3 Functions and Features l Ports: Auto-negotiation of the rate and duplex mode and automatic switching between the Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X) mode l VLAN assignment based on SSIDs l VLAN aggregation on uplink Ethernet ports l 4093 VLAN IDs (1-4093) and 16 virtual APs (VAPs) l Uplink ports in tagged and untagged mode l DHCP client l PPPoE dialup l Centralized data forwarding and local data forwarding l STA isolation in the same VLAN l ACL l LLDP l Uninterrupted service forwarding upon CAPWAP channel disconnection in direct forwarding mode l Uniform authentication on an AC l Dual-AC backup QoS features l Priority mapping and packet scheduling based on WMM profiles to implement priority-based data processing and forwarding l WMM parameter management for each radio frequency l WMM power saving l Priority mapping for upstream packets and flow-based mapping for downstream packets l Queue mapping and scheduling l User-based bandwidth limiting l Adaptive bandwidth allocation (the system dynamically adjusts bandwidth based on the number of users and radio environment) Security features l Open system authentication l WEP authentication/encryption l WPA/WPA2 authentication and encryption l 802.1x authentication and encryption l WAPI authentication and encryption Issue 01 (2012-10-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP5010DN-AGN Wireless LAN Access Point Product Description Features Description Maintenance features l AP management and maintenance by the AC 3 Functions and Features l Plug-and-play: automatic AC discovery and automatic configuration loading l Batch upgrade l Debugging using Telnet and the serial interface l Real-time configuration monitoring and fast fault location by using the NMS l System status alarm Issue 01 (2012-10-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. AP5010DN-AGN Wireless LAN Access Point Product Description 4 Technical Specifications Technical Specifications Specifications Table 4-1 Specifications of the AP5010DN-AGN Item Description Technical specifications Dimensions (H x W x D) 50 mm x 180 mm x 180 mm Weight 0.4 kg System memory l 128 MB DRAM l 32 MB flash memory Power specifications Power input l DC 12V±10% l POE Power: -48V DC l PoE function in compliance with IEEE 802.3af and 802.3at Environment parameters Issue 01 (2012-10-31) Maximum power consumption 9.5 W Operating temperature -10℃ to +50℃ Storage temperature -40℃ to +70℃ Humidity 5% to 95% (non-condensing) Waterproof grade IP31 Altitude –60 m to 4000 m Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. NOTE The maximum power consumption depends on local laws. 10 AP5010DN-AGN Wireless LAN Access Point Product Description 4 Technical Specifications Antenna Parameters Table 4-2 Antenna parameters of the AP5010DN-AGN Item Description Antenna type Built-in antenna Antenna gain 2.4GHz: 4 dBi Maximum number of concurrent users ≤ 128 Maximum transmit power 17 dBm 5GHz: 5 dBi l You can adjust the transmit power from the maximum to 15 dBm, with a step of 1 dBm. NOTE Actual transmit power depends on local laws and regulations. Maximum number of nonoverlappin g channels 2.4 GHz 5 GHz 802.11b/g 802.11a l 20MHz: 3 l 20MHz: 21 802.11n 802.11n l 20MHz: 3 l 20MHz: 21 l 40MHz: 9 Channel rate 802.11b: 1, 2, 5.5, and 11 Mbit/s 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s 802.11n data rate (2.4 GHz and 5 GHz) GI=800 ns Issue 01 (2012-10-31) GI=400ns 20 MHz (Mbit/s) 40 MHz (Mbit/s) 20 MHz (Mbit/s) 40 MHz (Mbit/s) 6.5 @ MCS0 13.5 @ MCS0 7.2 @ MCS0 15 @ MCS0 13 @ MCS1 27 @ MCS1 14.4 MCS1 30 MCS1 19.5 @ MCS2 40.5 @ MCS2 21.7 @ MCS2 45 @ MCS2 26 @ MCS3 54 @ MCS3 28.9 @ MCS3 60 @ MCS3 39 @ MCS4 81 @ MCS4 43.3 @ MCS4 90 @ MCS4 52 @ MCS5 108 @ MCS5 57.8 @ MCS5 120 @ MCS5 58.5 @ MCS6 121.5 @ MCS6 65 @ MCS6 135 @ MCS6 65 @ MCS7 135 @ MCS7 72.2 @ MCS7 150 @ MCS7 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 11 AP5010DN-AGN Wireless LAN Access Point Product Description Item 4 Technical Specifications Description 13 @ MCS8 27 @ MCS8 14.4 @ MCS8 30 @ MCS8 26 @ MCS9 54 @ MCS9 28.9 @ MCS9 60 @ MCS9 39 @ MCS10 81 @ MCS10 43.3 @ MCS10 90 @ MCS10 52 @ MCS11 108 @ MCS11 57.8 @ MCS11 120 @ MCS11 78 @ MCS12 162 @ MCS12 86.7 @ MCS12 180 @ MCS12 104 @ MCS13 216 @ MCS13 115.6 @ MCS13 240 @ MCS13 117 @ MCS14 243 @ MCS14 130 @ MCS14 270 @ MCS14 130 @ MCS15 270 @ MCS15 144.4 @ MCS15 300 @ MCS15 NOTE Modulation coding scheme (MCS) index: determines the spatial flow quantity, modulation, coding rate, and data rate. Guard interval (GI): indicates the period in nanoseconds the radio listens between packets. Receiver sensitivity 2.4 GHz 2.4 GHz 5 GHz 802.11b (CCK) 802.11g (nonHT20) 802.11a (non-HT20) l -89 dBm @ 6 Mb/s l -88 dBm @ 9 Mb/s l -88 dBm @ 9 Mb/s l -83 dBm @ 18 Mb/s l -91 dBm @ 1 Mb/s l -89 dBm @ 2 Mb/s l -88 dBm @ 5.5 Mb/s l -85 dBm @ 11 Mb/s l -89 dBm @ 6 Mb/s l -85 dBm @ 12 Mb/s l -85 dBm @ 12 Mb/s l -80 dBm @ 24 Mb/s l -83 dBm @ 18 Mb/s l -71 dBm @ 48 Mb/s l -76 dBm @ 36 Mb/s l -70 dBm @ 54 Mb/s l -80 dBm @ 24 Mb/s l -76 dBm @ 36 Mb/s l -71 dBm @ 48 Mb/s l -70 dBm @ 54 Mb/s Issue 01 (2012-10-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 12 AP5010DN-AGN Wireless LAN Access Point Product Description Item 4 Technical Specifications Description 2.4 GHz 5 GHz 5 GHz 802.11n (HT20) 802.11n (HT20) 802.11n (HT40) l -83 dBm @ MCS0/8 l -83 dBm @ MCS0/8 l -80 dBm @ MCS0/8 l -80 dBm @ MCS1/9 l -80 dBm @ MCS1/9 l -75 dBm @ MCS2/10 l -78 dBm @ MCS2/10 l -78 dBm @ MCS2/10 l -68 dBm @ MCS4/12 l -75 dBm @ MCS3/11 l -75 dBm @ MCS3/11 l -64 dBm @ MCS5/13 l -71 dBm @ MCS4/12 l -71 dBm @ MCS4/12 l -62 dBm @ MCS7/15 l -67 dBm @ MCS5/13 l -67 dBm @ MCS5/13 l -66 dBm @ MCS6/14 l -66 dBm @ MCS6/14 l -65 dBm @ MCS7/15 l -65 dBm @ MCS7/15 l -77 dBm @ MCS1/9 l -72 dBm @ MCS3/11 l -63 dBm @ MCS6/14 Standards Compliance Safety standards – UL 60950-1 – IEC 60950-1 – EN 60950-1 – GB 4943 Radio standards – ESTI EN 300 328 – ESTI EN 301 893 – RSS-210 EMC standards – EN 301.489–1 – EN 301.489–17 – ICES-003 – YD/T 1312.2-2004 – EN55022 (Class B) IEEE standards – IEEE 802.11a/b/g – IEEE 802.11n – IEEE 802.11h Issue 01 (2012-10-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 13 AP5010DN-AGN Wireless LAN Access Point Product Description 4 Technical Specifications – IEEE 802.11d – IEEE 802.11e Security standards – 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA – 802.1x – Advanced Encryption Standards (AES), Temporal Key Integrity Protocol (TKIP) – EAP Type(s) Environment standards – ETSI 300 019-2-1 – ETSI 300 019-2-2 – ETSI 300 019-2-3 EAP types – EAP-TLS/TTLS, PEAP, EAP-MD5, EAP-SIM Multimedia – WMMTM Issue 01 (2012-10-31) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 14
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Author : Huawei Technologies Co., Ltd. Create Date : 2012:10:24 15:21:17+08:00 Modify Date : 2012:10:24 15:21:17+08:00 Creator : XSL Formatter V4.1 R1 (4,1,2006,1206) for Windows Producer : Antenna House PDF Output Library 2.4.0 (Windows) Title : Product Description Subject : Product Description Trapped : False Page Count : 17 Page Mode : UseOutlinesEXIF Metadata provided by EXIF.tools