Huawei Technologies AP505130DN Wireless LAN Access Point User Manual Product Description

Huawei Technologies Co.,Ltd Wireless LAN Access Point Product Description

UserManual.wiki >

Huawei Technologies >

AP505130DN User Manual >

Contents

User manual-1

Huawei AP5130DN Access PointsProduct DescriptionIssue 01Date 2013-12-30HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without prior writtenconsent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.All other trademarks and trade names mentioned in this document are the property of their respective holders. NoticeThe purchased products, services and features are stipulated by the contract made between Huawei and thecustomer. All or part of the products, services and features described in this document may not be within thepurchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,and recommendations in this document are provided "AS IS" without warranties, guarantees or representationsof any kind, either express or implied.The information in this document is subject to change without notice. Every effort has been made in thepreparation of this document to ensure accuracy of the contents, but all statements, information, andrecommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd.Address: Huawei Industrial BaseBantian, LonggangShenzhen 518129People's Republic of ChinaWebsite: http://enterprise.huawei.comIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.i

Contents1 About This Document.............................................................................................................. 01 Product Positioning and Characteristics...................................................................................11.1 Product Positioning.........................................................................................................................................................21.2 Product Characteristics...................................................................................................................................................62 Hardware Structure.......................................................................................................................92.1 AP5130DN...................................................................................................................................................................103 Product Features...........................................................................................................................133.1 WLAN Features............................................................................................................................................................143.2 Network Features..........................................................................................................................................................143.3 QoS Features.................................................................................................................................................................153.4 Security Features..........................................................................................................................................................153.5 Maintenance Features...................................................................................................................................................163.6 BYOD...........................................................................................................................................................................163.7 Locating Service...........................................................................................................................................................163.8 Spectrum Analysis........................................................................................................................................................164 Technical Specifications.............................................................................................................184.1 Basic Specifications......................................................................................................................................................194.2 Radio Specifications.....................................................................................................................................................194.3 Standards Compliance..................................................................................................................................................22Huawei AP5130DN Access PointsProduct Description ContentsIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.ii

1 Product Positioning and CharacteristicsAbout This Chapter1.1 Product Positioning1.2 Product CharacteristicsHuawei AP5130DN Access PointsProduct Description 1 Product Positioning and CharacteristicsIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.1

1.1 Product PositioningTable 1-1 Product positioningProductModelFrequencyBandIEEEStandardCompliancePositioning UsageScenarioAP5130DN Dual band:l2.4 GHzl5 GHzThe AP5130DNcan provideservicessimultaneouslyon the 2.4 GHzand 5 GHzfrequency bandsto support moreaccess users.IEEE 802.11a/b/g/n/acThe cost-effectiveAP5130DNsupports 3 x 3MIMO andprovidescomprehensiveservice supportcapabilities. It isdeployedindoors andfeatures highreliability, highsecurity, simplenetworkdeployment,automatic ACdiscovery andconfiguration,and real-timemanagementandmaintenance.HuaweiAP5130DNcomplies withIEEE 802.11acand can providegigabit accessfor wirelessusers. This highcapacity greatlyimproves userexperience onwirelessnetworks.The AP5130DNprovides802.11n/acwireless accessnetworks forplaces withsimple buildingstructure, smallsize, denseusers, and highcapacitydemands, suchas small andmediumenterprises andbranches.The AP5130DNcan be flexiblydeployed andwork in both fitAP and bridgemode. The AP5130DN can work as a Fat AP or Fit AP and switch flexibly between the two workingmodes based on the network plan.Huawei AP5130DN Access PointsProduct Description 1 Product Positioning and CharacteristicsIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.2

When the wireless network scale is small, customers need to purchase only AP products and setthe APs to work as Fat APs. As the network scale expands, tens of or hundreds of APs exist onthe network. To simplify network management, customers are advised to purchase ACs toperform centralized management on the APs and set the APs to work as Fit APs.Typical networking modes are as follows:Figure 1-1 Fit AP networking (AP mode)AP nAP1 ……NMSACAuthentication systemSwitchManagement channel between NMS and ACManagement channel between the AC and the AP and data channel Where data flows are encapsulated with CAPWAPChannel where data flows are not encapsulated with CAPWAPBusiness usersResidential usersSTA STA In this networking, the AP functions as a fit AP and provides only data forwarding functions.The AC is responsible for user access, AP go-online, AP management, authentication, routing,security, and QoS.Huawei AP5130DN Access PointsProduct Description 1 Product Positioning and CharacteristicsIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.3

Figure 1-2 Fit AP networking (WDS mode: point-to-point)Figure 1-3 Fit AP networking (WDS mode: point-to-multipoint)In this networking, the AP connects two or more independently wired or wireless LANs throughwireless links to construct a network on which users can exchange data. In Wireless DistributionSystem (WDS) mode, the AP supports point-to-point (P2P) and point-to-multipoint (P2MP)networking modes. With 5 GHz and 2.4 GHz frequency bands, the AP can implement wirelessbridging and access functions.Huawei AP5130DN Access PointsProduct Description 1 Product Positioning and CharacteristicsIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.4

Figure 1-4 Fit AP mesh networkingOn the preceding network, APs function as mesh points (MPs) and are fully-meshed to establishan auto-configured and self-healing wireless mesh network (WMN). APs with the gatewayfunction can work as the mesh portal points (MPPs) through which the WMN can provide accessto the Internet. Terminals connect to APs to access the WMN. The WMN uses dedicated meshrouting protocols to guarantee high transmission quality and is more applicable to scenarios thatrequire high bandwidth and highly stable Internet connections.Huawei AP5130DN Access PointsProduct Description 1 Product Positioning and CharacteristicsIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.5

Figure 1-5 Fat AP networkingAP nAP1 ……SwitchSTA STASTA STAOn the preceding network, the device functions as a Fat AP to implement functions such as useraccess, authentication, data security, service forwarding, and QoS.1.2 Product CharacteristicsThe AP5130DN has the following advantages on a WLAN.Huawei AP5130DN Access PointsProduct Description 1 Product Positioning and CharacteristicsIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.6

ProductCharacteristicsDescriptionHigh-speed andreliable wirelessaccesslCompatibility with IEEE 802.11a/b/g/n/acl3 x 3 MIMO and a maximum rate of 1.75 Gbit/slLink aggregation of dual Ethernet portslSupports Wi-Fi Multimedia (WMM) and priority mapping on theair interface and wired interface.lSupports wired link integrity check.lSupports load balancing.lSupports roaming without service interruption in Fit AP mode.lSupports AC dual-link backup in Fit AP mode.lSupports 11n beamforming.lLatest 802.11ac chip with higher performance and wider coveragelSupports airtime scheduling which ensures fairness in channeloccupation time for all users.NOTEThis function is not supported in V200R003C00.Comprehensiveuser access controlcapabilitylSupports access control lists (ACLs) and implements user accesscontrol based on the user group policy.lProvides fine-grained bandwidth management for each user.lSupports user isolation policies.lSupports unified authentication on the AC in Fit AP mode.lIdentifies the device type according to the organizationally uniqueidentifier (OUI) in the MAC address, user agent (UA) informationin an HTTP packet, and DHCP options in Fit AP mode.lThe RADIUS server delivers packet forwarding, security, and QoSpolicies according to the device type carried in the RADIUSauthentication and accounting packets in Fit AP mode.High networksecuritylOpen system authenticationlWEP authentication/encryptionlWPA/WPA2-PSK authentication and encryptionlWPA/WPA2-802.1x authentication and encryptionlWAPI authentication and encryptionlSupports wireless intrusion detection system (WIDS), includingrogue AP and STA detection, attack detection, STA/AP blacklistand whitelist.Huawei AP5130DN Access PointsProduct Description 1 Product Positioning and CharacteristicsIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.7

ProductCharacteristicsDescriptionFlexiblenetworking andenvironmentadaptabilitylProvides flexible networking capabilities and applies to variousapplication scenarios. Mesh and WDS scenarios are supported onlyin Fit AP mode.lHas strong environment adaptability. The AP can automaticallyselect the transmission rates, channels, and transmit power to adaptto various radio environments and avoid interference in real time.lAdjusts bandwidth allocation based on the user quantity andenvironment to improve user experience.lSupports the MIMO antenna system, connects to the external dual-band antenna (2.4 GHz and 5 GHz), and flexibly adjusts antennadirections.lIdentifies interference sources such as baby monitors, Bluetoothdevices, digital cordless phones (at 2.4 GHz frequency band only),wireless audio transmitters (at both the 2.4 GHz and 5 GHzfrequency bands), wireless game controllers, and microwaves in FitAP mode and works with eSight to locate interference sources anddisplay spectrums.Easy devicemanagement andmaintenancelAutomatically goes online and loads the configuration, and supportsplug-and-play (PnP) in Fit AP mode.lSupports batch upgrade.lAllows real-time monitoring on the network management system(NMS) to facilitate remote configuration and fast fault location.lSupports the Link Layer Discovery Protocol (LLDP) to implementautomatic link discovery and obtain the network topology.Huawei AP5130DN Access PointsProduct Description 1 Product Positioning and CharacteristicsIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.8

2 Hardware StructureAbout This Chapter2.1 AP5130DNHuawei AP5130DN Access PointsProduct Description 2 Hardware StructureIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.9

2.1 AP5130DNAppearanceFigure 2-1 shows AP5130DN appearance.NOTEThe actual device appearance may be different from the following device appearance, but these differenceswill not affect device functions.Figure 2-1 AP5030DN appearancePortThe following figure shows ports on the AP5030DN.Figure 2-2 AP5030DN ports25 3 4 1 67As shown in Figure 2-2, each port can be described as follows:Huawei AP5130DN Access PointsProduct Description 2 Hardware StructureIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.10

l1. Input port for 12 V DC power supplyl2. Default button: restores factory settings if you hold down the button more than 3 seconds.l3. GE1: 10/100/1000M port used to connect to the wired Ethernet.l4. GE0/PoE: 10/100/1000M port used to connect to the wired Ethernet. The port can connectto a PoE power supply to provide power for APs.l5. Console port: connects to the maintenance terminal for AP configuration andmanagement.l6. Lock port: protects the AP against theft.l7. Dual-band antenna portNOTEDifferent power adapters are delivered with the AP products according to standards in the countries orregions where the AP products are delivered. These countries and regions are identified by the barcode onan AP's nameplate, including:lEU (Europe)lUK (United Kingdom)lCN (China)lAU (Australia)lUS (United States)lUSA (the AP is sold only in the U.S)LED IndicatorsNOTEIndicator colors may vary slightly at different temperature.Type Color Status DescriptionDefaultstatus afterpower-onGreen Steady on The AP is just powered on and the software is notstarted yet.SoftwarestartupstatusGreen Steady onafterblinkingonceAfter the system is reset and starts uploading thesoftware, the indicator blinks green once. Until thesoftware is uploaded and started, the indicatorremains steady green.RunningstatusGreen Blinkingonce every2s (0.5 Hz)lThe system is running properly, the Ethernetconnection is normal, and STAs are associatedwith the AP.lThe system enters the Uboot CLI.Blinkingonce every5s (0.2 Hz)The system is running properly, the Ethernetconnection is normal, and no STA is associated withthe AP. The system is in low power consumptionstate.Huawei AP5130DN Access PointsProduct Description 2 Hardware StructureIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.11

Type Color Status DescriptionAlarm Green Blinkingonce every0.25s (4Hz)lThe software is being upgraded.lAfter the software is uploaded and started, the APworking in Fit AP mode requests to go online onthe AC and maintains this state until it goesonline successfully on the AC (before theCAPWAP link is established).lThe AP working in Fit AP mode fails to go onlineon the AC (the CAPWAP link disconnects).Fault Red Steady on A fault that affects services has occurred, such as aDRAM detection failure or system software loadingfailure. The fault cannot be automatically rectifiedand must be rectified manually.Huawei AP5130DN Access PointsProduct Description 2 Hardware StructureIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.12

3 Product FeaturesAbout This Chapter3.1 WLAN Features3.2 Network Features3.3 QoS Features3.4 Security Features3.5 Maintenance Features3.6 BYOD3.7 Locating Service3.8 Spectrum AnalysisHuawei AP5130DN Access PointsProduct Description 3 Product FeaturesIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.13

lSupports wireless intrusion detection system (WIDS), including rogue AP and STAdetection, attack detection, STA/AP blacklist and whitelist.l802.1x authentication, MAC address authentication, and Portal authentication3.5 Maintenance FeaturesMaintenance features supported by the AP are as follows:lUnified management and maintenance on the AC in Fit AP modelAutomatic login and configuration loading, and plug-and-play (PnP) in Fit AP modelWDS zero-configuration deployment in Fit AP modelMesh network zero-configuration deployment in Fit AP modelBatch upgradelLocal AP management through the serial interface or using TelnetlReal-time configuration monitoring and fast fault location using the NMSlSystem status alarm3.6 BYODNOTEThe AP supports bring your own device (BYOD) only in Fit AP mode.BYOD features supported by the AP are as follows:lIdentifies the device type according to the organizationally unique identifier (OUI) in theMAC address.lIdentifies the device type according to the user agent (UA) information in an HTTP packet.lIdentifies the device type according to DHCP options.lThe RADIUS server delivers packet forwarding, security, and QoS policies according tothe device type carried in the RADIUS authentication and accounting packets.3.7 Locating ServiceNOTEThe AP supports the locating service only in Fit AP mode.Locating service features supported by the AP are as follows:lLocates tags manufactured by AeroScout or Ekahau.lLocates Wi-Fi terminals.3.8 Spectrum AnalysisNOTEThe AP supports spectrum analysis only in Fit AP mode.Huawei AP5130DN Access PointsProduct Description 3 Product FeaturesIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.16

Spectrum analysis features supported by the AP are as follows:lIdentifies interference sources such as baby monitors, Bluetooth devices, digital cordlessphones (at 2.4 GHz frequency band only), wireless audio transmitters (at both the 2.4 GHzand 5 GHz frequency bands), wireless game controllers, and microwaves.lWorks with eSight to locate and perform spectrum analysis on interference sources.Huawei AP5130DN Access PointsProduct Description 3 Product FeaturesIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.17

4 Technical SpecificationsAbout This Chapter4.1 Basic Specifications4.2 Radio Specifications4.3 Standards ComplianceHuawei AP5130DN Access PointsProduct Description 4 Technical SpecificationsIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.18

4.1 Basic SpecificationsTable 4-1 Basic specificationsItem DescriptionTechnicalspecificationsDimensions (H x W xD)53 mm x 220 mm x 220 mmWeight 1.0 kgSystem memory l256 MB DDR2l32 MB flash memoryPower specifications Power input lDC 12 V ± 10%lPoE power: -48 V DC (in compliance withIEEE 802.3af/at)Maximum powerconsumption13 WNOTEThe actual maximum power consumption dependson local laws and regulations.EnvironmentspecificationsOperatingtemperature-10°C to +50°CStorage temperature -40°C to +70°COperating humidity 5% to 95% (non-condensing)Waterproof grade IP41Altitude -60 m to 4000 mAtmosphericpressure70 kPa to 106 kPa 4.2 Radio SpecificationsTable 4-2 Radio specificationsItem DescriptionAntennatypeBuilt-in antennaAntennagainl2.4G: 2.5dBil5G: 4dBiHuawei AP5130DN Access PointsProduct Description 4 Technical SpecificationsIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.19

Item DescriptionMaximumnumber ofconcurrentuserslFit AP mode: ≤ 256lFat AP mode: ≤ 64Maximumtransmitpower foreach radiol2.4 GHz: 20 dBml5 GHz: 16 dBmNOTEThe 2.4 GHz radio does not support the 40M bandwidth in FCC regions (includingAmerica).The actual transmit power depends on local laws and regulations.You can adjust the transmit power from the maximum transmit power to 1 dBm, with astep of 1 dB.Maximumnumber ofnon-overlappingchannels2.4 GHz802.11b/gl20 MHz: 3802.11nl20 MHz: 3l40 MHz: 15 GHzl802.11a–20 MHz: 5l802.11n–20 MHz: 5–40 MHz: 2l802.11ac–20MHz: 5–40MHz: 2–80MHz: 1NOTEThe table uses the number of non-overlapping channels supported by Chinaas an example. The number of non-overlapping channels varies in differentcountries. For details, see the CountryCode & Channels compliance statusNOTICEIf the AP is delivered to the USA, payattention to the following on channel andfrequency band usage.1. The country code of the AP is fixed.2. The frequency band ranging from5.15 GHz to 5.25 GHz can only beused indoors.3. High power radars working atfrequencies in the range of 5.25 GHzto 5.35 GHz, 5.47 GHz to 5.6 GHz,and 5.65 GHz to 5.725 GHz caninterfere with or even damage APsworking at the same frequency.4. APs cannot work at channels infrequencies ranging from 5.6 GHz to5.65 GHz or their overlappingchannels.Channel ratesupported802.11b: 1, 2, 5.5, and 11 Mbit/s802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s802.11n: 6.5 to 450 Mbit/s802.11ac: 6.5 to 1300Mbit/sHuawei AP5130DN Access PointsProduct Description 4 Technical SpecificationsIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.20

Item DescriptionReceiversensitivity2.4 GHz802.11b (CCK)l-96 dBm @ 1Mb/sl-92 dBm @ 2Mb/sl-92 dBm @5.5 Mb/sl-89 dBm @11 Mb/s2.4 GHz802.11g (non-HT20)l-87 dBm @ 6Mb/sl-87 dBm @ 9Mb/sl-87 dBm @12 Mb/sl-86 dBm @18 Mb/sl-83 dBm @24 Mb/sl-80 dBm @36 Mb/sl-76 dBm @48 Mb/sl-74 dBm @54 Mb/s2.4 GHz802.11n (HT20)l-87 dBm @MCS0l-87 dBm @MCS1l-86 dBm @MCS2l-83 dBm @MCS3l-79 dBm @MCS4l-76 dBm @MCS5l-74 dBm @MCS6l-71 dBm @MCS72.4 GHz802.11n(HT40)l-84 dBm @MCS0l-84 dBm @MCS1l-83 dBm @MCS2l-79 dBm @MCS3l-76 dBm @MCS4l-72 dBm @MCS5l-70 dBm @MCS6l-68 dBm @MCS75 GHz802.11a (non-HT20)l-90 dBm @ 6Mb/sl-89 dBm @ 9Mb/sl-88 dBm @12 Mb/sl-85 dBm @18 Mb/sl-82 dBm @24 Mb/sl-79 dBm @36 Mb/sl-74 dBm @48 Mb/sl-73 dBm @54 Mb/s5 GHz802.11n (HT20)l-89 dBm @MCS0l-87 dBm @MCS1l-85 dBm @MCS2l-80 dBm @MCS3l-77 dBm @MCS4l-73 dBm @MCS5l-71 dBm @MCS6l-70 dBm @MCS75 GHz802.11n (HT40)l-86 dBm @MCS0l-84 dBm @MCS1l-81 dBm @MCS2l-78 dBm @MCS3l-74 dBm @MCS4l-70 dBm @MCS5l-67 dBm @MCS6l-66 dBm @MCS7-Huawei AP5130DN Access PointsProduct Description 4 Technical SpecificationsIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.21

Item Description5 GHz802.11ac(VTH20)l-88 dBm @MCS0NSS1l-85 dBm @MCS1NSS1l-83 dBm @MCS2NSS1l-79 dBm @MCS3NSS1l-76 dBm @MCS4NSS1l-72 dBm @MCS5NSS1l-71 dBm @MCS6NSS1l-70 dBm @MCS7NSS1l-65 dBm @MCS8NSS15 GHz802.11ac(VTH40)l-85 dBm @MCS0NSS1l-83 dBm @MCS1NSS1l-78 dBm @MCS2NSS1l-77 dBm @MCS3NSS1l-73 dBm @MCS4NSS1l-69 dBm @MCS5NSS1l-68 dBm @MCS6NSS1l-67 dBm @MCS7NSS1l-66 dBm @MCS8NSS1l-60 dBm @MCS9NSS15 GHz802.11ac(VTH80)l-82 dBm @MCS0NSS1l-79 dBm @MCS1NSS1l-77 dBm @MCS2NSS1l-74 dBm @MCS3NSS1l-73 dBm @MCS4NSS1l-66 dBm @MCS5NSS1l-65 dBm @MCS6NSS1l-64 dBm @MCS7NSS1l-59 dBm @MCS8NSS1l-57 dBm @MCS9NSS1- 4.3 Standards ComplianceSafety standardslUL 60950–1lCAN/CSA 22.2 No.60950-1lIEC 60950–1lEN 60950–1lGB 4943Radio standardsAP5010DN-AGN:lETSI EN 300 328lETSI EN 301 893lFCC Part 15C: 15.247Huawei AP5130DN Access PointsProduct Description 4 Technical SpecificationsIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.22

lFCC Part 15C: 15.407lRSS-210lAS/NZS 4268AP5010SN-GN:lETSI EN 300 328lFCC Part 15C: 15.247lRSS-210lAS/NZS 4268EMC standardslEN 301 489–1lEN 301 489–17lETSI EN 60601-1-2lFCC Part 15lICES-003lYD/T 1312.2-2004lITU k.20lGB 9254lGB 17625.1lAS/NZS CIPSR22lEN 55022lEN 55024lCISPR 22lCISPR 24lIEC61000-4-6lIEC61000-4-2IEEE standardslIEEE 802.11a/b/glIEEE 802.11nlIEEE 802.11aclIEEE 802.11hlIEEE 802.11dlIEEE 802.11eSecurity standardsl802.11i, Wi-Fi Protected Access 2 (WPA2), and WPAl802.1XlAdvanced Encryption Standards (AES) and Temporal Key Integrity Protocol (TKIP)Huawei AP5130DN Access PointsProduct Description 4 Technical SpecificationsIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.23

lEAP Type (s)Environment standardslETSI 300 019-2-1lETSI 300 019-2-2lETSI 300 019-2-3lETSI 300 019-1-1lETSI 300 019-1-2lETSI 300 019-1-3EMFlCENELEC EN 62311lCENELEC EN 50385lOET65lRSS-102lFCC Part1&2lFCC KDBRoHSlDirective 2002/95/EC & 2011/65/EUReachlRegulation 1907/2006/ECWEEElDirective 2002/96/EC & 2012/19/EUHuawei AP5130DN Access PointsProduct Description 4 Technical SpecificationsIssue 01 (2013-12-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.24